THERMOBILE production plant, Breda, The Netherlands.

Transcription

1 P r o d u c t c a t a l o g u e

2 THERMOBILE production plant, Breda, The Netherlands. 3 4 During the past 40 years Thermobile Industries BV has specialized in the Development, Production and International Sales and Marketing of space heaters. The head office is situated in Breda, The Netherlands (photo 1). In addition to the distribution through Thermobile s own sales and service offices in the Netherlands, Germany, France, the United Kingdom and the United States the products are also distributed through a worldwide network of dedicated partners. The Thermobile products are produced with great care and they are extensively tested. A permanent quality control system, according to ISO 9001:2000, is part of the production process (photo 2-6). Naturally, all Thermobile heaters comply with the most stringent European certification standards and they carry the well-known markings of CE, GASTEC and/or CSA/UL and GOST THERMOBILE INDUSTRIES BV Konijnenberg 80, 4825 BD Breda, The Netherlands Postbus 3312, 4800 DH Breda, The Netherlands Company number 3502 Phone (076) , Fax (076) info@thermobile.com internet: THERMOBILE DEUTSCHLAND GmbH Siemensring 44 Q Willich - Germany Tel. (0) , Fax (0) info@thermobile.de internet: THERMOBILE FRANCE sarl 3, rue Denis Papin LA FERTÉ ST. AUBIN France Phone , Fax info@thermobile.fr internet: THERMOBILE NORTH AMERICA PO Box 403, 535 West Wall Street Darien, WI USA Phone (262) , Fax (262) Nextel: 110*531111*24 info@thermobile.us internet: THERMOBILE UK LTD 12, Buckingham Close Bermuda Industrial Estate Nuneaton, Warwickshire CV10 7JT, United Kingdom Phone , Fax info@thermobile.co.uk internet: Member of the Honing Beheer Group of Companies

3 T/TA/TAS Direct oil fired ITA/ITAS Oil fired with flue connection IMA Oil fired with flue connection and separate external burner IMAC Oil fired with flue connection (containerised) G/GA/GA V Direct propane fired MS Modulating control units AGA Direct natural gas / propane fired TAS 800 E Direct oil fired with large air throw AT Cabinet used oil fired with flue connection and built-in fuel tank BioEnergy Rapeseed oil / linseed oil fired with flue connection and built in tank PROHEAT Cabinet oil fired with flue connection and built-in fuel tank COOLSPACE Air coolers PRODRY Dehumidifiers BX/CH/VTB/ProHeat 18 Electric heaters VAL Infra-red radiant oil fired Accessories Recirculation fans Service testing equipment Dimensions and weights diesel/heating oil paraffin propane natural gas electric used oil Rapeseed oil

4 T/TA/TAS Direct oil fired T 80 / TA 80 T 40 / TA 40 T 22 / TA 22 T 16 / TA 16 Portable model (wheel set optional) Air wheels are optional. Tank heating (optional). TAS 80, suspended model without fuel tank and wheels. Working principle 4 Safe cool outside housing. High pressure pump for diesel or paraffin. 1-Way pipe system prevents fuel disturbance. Tank for 15 hours burning duration (except models T/TA 16). Direct heat with 100% efficiency. Fast temperature rise. Fixed outlet temperature circa 450 C. FEATURES Advantages of THERMOBILE T/TA/TAS series: Very mobile. Economic in use. Reliable. Durable phospated body parts with powder coating. Exchangeable components. T models with manual on/off switch. TA models with burner relay, photocell flame control and thermostat connection. TAS models without fuel tank and wheel set, with hooks for suspension and return type fuel pump to be connected to suction and return fuel hoses. Air wheels for T/TA 16/22/40/80 available as accessory. High pressure pump with 1-way pipe system. Conversion kit to 2-way pipe system available for connection to bulk tank (max. length 50 m/height 3 m, depends on diameter of pipe). Room ventilation is required.

5 APPLICATIONS AGRICULTURE Heating of sheds, and workshops. Drying of agricultural products. 5 HORTICULTURE Heating of greenhouses and polytunnels. (N.B. Only use paraffin and control CO 2 emission). INDUSTRY Heating of factories and transit sheds, defrosting of pipework and installations. MOTOR TRADE General workshop heating. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) APPROX. FUEL HEATED TANK POWER PART HEAT OUTPUT CONS. OIL AIR FLOW CAPACITY CONSUMPTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M 3 /hr LITRES 230V (AMPS) CONNECTION T , ,8 1, ,1 - T ,5 2, ,0 - T ,5 3, ,1 - T ,0 7, ,6 - TA , ,8 1, ,1 YES TA ,5 2, ,6 YES TA ,5 3, ,8 YES TA ,0 7, ,5 YES TAS , ,8 1, ,0 YES TAS ,5 3, ,8 YES TAS ,0 7, ,5 YES 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

6 ITA/ITAS Oil fired with flue connection NEW ITA 75 ITA 45 ITA 30 For recirculation fans see page 32 Air wheels are optional. Tank heating (optional). New burner chamber. Thermobile achieves optimum coverage with the unique combination of stainless steel and high-temperature proof steel for the burner chamber and heat exchanger. ITAS 75, suspended model without fuel tank and wheels. Working principle 6 High pressure pump for diesel or paraffin. Combustion chamber heat resistant up to 850 C. 1-Way pipe system prevents fuel disturbance. 100% Clean and dry heat. Fixed outlet temperature circa C. Tank for 16 hours burning duration. 20% more than competitors. FEATURES Advantages of THERMOBILE ITA series: Clean heat. Heat distribution is possible. Mobility with fuel tank. Durable phosphated body panels with powder coating. With burner relay, photocell flame control, overheat protection and thermostat connection. ITAS models without fuel tank and wheel set, with hooks for suspension and return type fuel pump to be connected to suction and return fuel hose. High pressure pump with 1-way pipe system. Conversion kit to 2-way pipe system available for connection to bulk tank (max. length 50 m/height 3m, depends on diameter of pipe). Room ventilation is required.

7 APPLICATIONS AGRICULTURE Heating stables, sheds and workshops. Drying of agricultural products. Storing flower bulbs without risk of harmful ethylene emission. HORTICULTURE Heating of greenhouses and polytunnels without risk of harmful CO 2 Heating sorting areas. emission. BUILDING INDUSTRY Heating and drying of building locations and all-weather projects. INDUSTRY Heating of transit sheds, workshops and warehouses. MOTOR TRADE Heating workshops and body preparation areas. Spray booth heating. MARQUEES HEATING ITA models are especially suited for heating marquees, showrooms and sports halls. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) 7 APPROX. FUEL HEATED MAXIMAL TANK POWER OUTLET FLUE PART HEAT OUTPUT CONS. OIL AIR FLOW VENTILATOR CAPACITY CONSUMPTION CONE CONNECTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M 3/ hr BACK PRESSURE LITRES 230V (AMPS) Ø MM Ø MM CONNECTION ITA , ,4 2, , YES ITA , ,6 3, , YES ITA , ,7 5, , YES ITAS , ,4 2, , YES ITAS , ,6 5, , YES ITAS , ,7 6, , YES 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

8 IMA Oil fired with flue connection and separate external IMA 185 Axial IMA 111 Axial IMA 61 Axial Fork truck slots available. Tigerloop standard. IMA 61/111 can pass through a door width of 80 cm. Air wheels are optional. MULTITANKS, for use in combination with IMA. Working principle 8 High efficiency heat exchanger (92%). Combustion chamber heat resistant up to 850 C. Radial fan for powerful heat distribution. Protection bars all around. Big wheels. 100% Clean and dry heat. Large heat throw. Outlet temperature circa C. Lower tray for oil containment during servicing. Propane gas model on request. FEATURES Advantages of THERMOBILE IMA series: High capacity. Easily transportable. Compact.. Durable phosphated body panels with powder coating. With overheating protection and temperature limitation of warm air. Preheating of chamber, so that no cold air is blown during start up. Fully automatic, controllable with thermostat connection. Fuel filter with condensate separator. Tigerloop standard. Burner with rain cover and lower tray for oil containment during servicing. Room ventilation is required, fresh air connection available. Available with 2 fan types: axial : standard fan radial HP : High Pressure for extra high pressure (500 Pa) and air flow. Radial fans are essential for heat distribution with hoses.

9 burner IMA 185 Radial IMA 111 Radial IMA 61 Radial APPLICATIONS BUILDING INDUSTRY Heating and drying of building sites and all-weather projects. MARQUEE HEATING IMA models are especially suited for heating marquees, showrooms and sports halls. INDUSTRY Heating of transit sheds and workshops. AGRICULTURE Heating of sheds and storage areas. Drying of agricultural products. Storing bulbs without the risk of harmful ethylene emission. 9 HORTICULTURE Heating of greenhouses and polytunnels without the risk of harmful CO 2 emission. MOTOR TRADE Heating workshops and body preparation areas. Spray booth heating. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) Recirculatiionset IMA. MULTITANKS, maximum storage capacity at minimum dimensions, for storing domestic oil (consult local regulations). APPROX. FUEL HEATED MAX. BACK POWER OUTLET FLUE PART GROSS OUTPUT CONS. OIL AIR FLOW PRESSURE OF FAN CONSUMPTION CONE CONNECTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M 3 /hr Pa (AMPS) Ø MM Ø MM CONNECTION IMA 61 axial ,5 5, ,8/230V YES IMA 61 radial ,5 5, ,1/230V YES IMA 111 axial ,9 9, ,1/230V YES IMA 111 radial ,9 9, ,2/230V YES IMA 111 radial HP ,9 9, ,7/400V YES IMA 185 axial ,4 15, ,2/230V YES IMA 185 radial HP ,4 15, ,4/400V YES IMA 185 radiaal 230V ,4 15, /230V YES 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

10 IMAC Oil fired with flue connection (containerised) Interactive CD-rom presentation IMAC 4000 E IMAC 2000 E IMAC 2000S Working principle High efficiency heat exchanger (92%). Weather resistant and lockable casing. High Pressure fan for powerful heat distribution. 100% Clean and dry heat. Large heat throw. Outlet temperature circa C. Combustion chamber heat resistant up to 850 C. 10 Recirculation hose flange possible. Lower tray for oil containment during servicing. Propane gas model on request. Advantages of THERMOBILE IMAC series: High capacity. Easily and safely transportable. Central control. FEATURES Stackable construction with crane hooks. Body work in stainless steel. Standard with stainless steel frame on box girders with fork truck slots and lifting hooks. Lockable door panels for control box and burner area with feed through glands for cable and fuel hoses. Intercal industrial burner with flow control. Completely automatic burner control with thermostat connection. With overheat protection and temperature limitation of warm air. Fan and thermal security resettable from control box. Removable outlet flanges Ø 300/500 or 600 mm (recirculation hose flange available as accessory). Multi-functional warm air distribution head for 2 to 6 hoses available.

11 APPLICATIONS BUILDING INDUSTRY Heating and drying of building locations and all-weather projects. MARQUEE HEATING IMAC models are especially suited for heating marquees, showrooms and sports halls. 11 INDUSTRY Heating of transit sheds, workshops and warehouses. Full humidity proof switch box with central control panel, pilot lights and digital temperature regulation. Intercal industrial burner with flow control and lower tray for oil containment. High pressure radial fan for long distance heat throw. Stackable construction with crane hooks. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) APPROX. FUEL HEATED MAX. BACK POWER OUTLET FLUE PART GROSS OUTPUT CONS. OIL AIR FLOW PRESSURE OF CONSUMPTION CONE CONNECTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M 3 /hr FAN Pa 400V (AMPS) Ø MM Ø MM CONNECTION IMAC 2000 E ,4 15, ,4 300/500/ YES IMAC 2000 S ,4 15, ,0 300/500/ YES IMAC 4000 E ,0 31, ,0 500/ YES 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

12 G models Direct propane gas fired G 45 E G 30 E Working principle MODELS G 15/30/45 E G 15 E Direct heat with 100% efficiency. Adjustable capacity. Advantages of THERMOBILE G series: Clean combustion. Easy to maintain. High capacity for low price. 12 FEATURES Stainless steel body with synthetic foot. G 30 E) Security of gas supply. Thermo couple flame protection. Room ventilation is required. Service friendly. With adjustable capacity (gas pressure) regulator (G 45 E and APPLICATIONS BUILDING INDUSTRY Heating and drying of buildings and all-weather projects. Motor trade, General workshop heating TECHNICAL SPECIFICATIONS (dimensions and weights on back page) HEAT OUTPUT APPROX. FUEL HEATED POWER GAS PART MIN. MAX. CONS. GAS KG/hr AIR FLOW CONSUMPTION (ON HEATER) THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr Btu/hr kw kcal/hr MIN. MAX. M 3 /hr 230V (AMPS) BAR CONNECTION G 15 E , , ,17 1, ,3 0,7 - G 30 E , , ,98 2, ,45 1,5 - G 45 E , , ,10 3, ,45 2,0-1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

13 GA models Direct propane gas fired GA 110 E (wheel set standard) GA 60 E/GA 85 E (wheel set optional) GA 42 E Working principle MODELS GA 25/42/60/85/110 E GA 25 E Clean burner because of fresh air connection. Full humidity and dust proof control panel. Removable exterior cover for service. Wheels available as an accessory (GA 60/85). Direct heat with 100% efficiency. Adjustable capacity. Adjustable outlet temperature between 120 and 180 C. FEATURES GA models with burner relay, ionisationflame protection, thermostat connector and hose breakage protection. APPLICATIONS AGRICULTURE Heating of stables and sheds. Drying of agricultural products. HORTICULTURE Heating of greenhouses and polytunnels (N.B. control CO 2 emission). 13 BUILDING INDUSTRY Heating and drying of buildings and all-weather projects. SPECIAL APPLICATION The portable and mobile models can be connected to gas bottles for on site use. For larger models sufficient gas pressure must be available and two or even three 47 kg bottles are required. The heaters may also be connected to a bulk propane tank. All GA models can be connected to a modulating control unit (see page 14/15). TECHNICAL SPECIFICATIONS (dimensions and weights on back page) HEAT OUTPUT APPROX. FUEL HEATED POWER GAS PRESSURE PART MIN. MAX. CONS. GAS KG/hr AIR FLOW CONSUMPTION (ON HEATER) THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr Btu/hr kw kcal/hr MIN. MAX. M 3 /hr 230V (AMPS) BAR CONNECTION GA 25 E ,9 1, ,30 0,5-1,5 YES GA 42 E ,0 3, ,52 0,4-1,5 YES GA 60 E* ,9 4, ,64 0,4-2,0 YES GA 85 E* ,8 6, ,64 0,4-2,0 YES GA 110 E ,9 9, ,20 0,4-2,0 YES *) Standard without wheels, for wheel set see accessories. 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

14 GA EV Direct propane fired, vertical MS Modulating control units GA 110 EV GA 60 EV/GA 85 EV MS 60 Working principle MODULATING CONTROL UNITS MS 20, MS 40 AND MS Full humidity and dust proof control panel. Clean burner because of fresh air connection. Removable exterior cover for service. For suspension above a fan in a crop drying installation. Blowing upwards is also possible. With the MS 60, a drying plant operating to a maximum of 60 kg of propane gas per hour, 20 kg for the MS 20 and 40 kg for the MS 40, can be controlled in which several heaters (also all horizontal models) can be connected. The modulating control unit ensures that the heat capacity is automatically and constantly adapted to the requirement at any moment. This is a continuous process. The drying of products at highly fluctuating outside temperatures can thus be improved considerably. The desired temperature is set on the control panel which measures the temperature of the crop by means of a sensor. The panel controls the gas pressure regulator with a servo motor which provides more or less gas flow to the burners and the temperature is adjusted until the preset value is reached. The measured temperature value is digitally readable. The servo motor and the gas pressure regulator of this unit can also be connected to a central storage computer. The smaller unit MS 20 is supplied as a separate regulator and a gas pressure regulator to be mounted separately with a servo motor. On this unit 1 to 3 heaters can be connected. Servo motor with gas valve for connction to central computer. Full humidity and dust proof control panel containing all vulnerable components, with fresh air intake connection. Fire protection system for crop drying. FEATURES EV models with suspension hooks. Technical specifications as per GA models. For vertical operation the magnetic valve system is altered to suit. Advantages of MODULATING CONTROL UNITS: MS 20: MS 60: Modulating crop drying of smaller amounts of Separate modulating control of different sections. Accurate adjustable crop temperature (to 0,1 C). Saving on cost of fuel. Superior product quality.. crop for an economic price.

15 AGRICULTURE Drying and storing of agricultural products. Intense drying of flower bulbs, when a high ventilation standard is required to prevent harmful ethylene emission. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) HEAT OUTPUT APPROX. FUEL HEATED POWER GAS GAS PRESSURE PART MIN. MAX. CONS. GAS KG/hr AIR FLOW CONSUMPTION CONNECTION (ON HEATER) THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr Btu/hr kw kcal/hr MIN. MAX. M 3 /hr 230V (AMPS) INCH BAR CONNECTION GA 42 E* ,0 3, ,52 1/2 0,4-1,5 YES GA 60 EV* ,9 4, ,64 1/2 0,4-2,0 YES GA 85 EV* ,8 6, ,64 1/2 0,4-2,0 YES GA 110 EV* ,9 9, ,20 1/2 0,4-2,0 YES 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES 15 ANCILLARIES PART NUMBER Modulating control unit MS 20 (1-20 kg propane), adjusting range 0,4-2,0 bar, Ø connection 1/4" IN-3/8" OUT, supply 230V Modulating control unit MS 20 (1-40 kg propane), adjusting range 0,4-2,0 bar, Ø connection 1/4" IN-3/8" OUT, supply 230V Modulating control unit MS 60 (1-60 kg propane), adjusting range 0,4-2,0 bar, Ø connection 1/4" IN-3/8" OUT, supply 230V3-point control with manual operation Connection accessory for external computer (instead of complete MS): Modulating control unit MS 60, Ø connection 1/2" Modulating control unit MS 60,supply 230 VAC 50/60Hz, 3-point control with manual operation Modulating control unit MS 60,supply 230 VAC 50/60Hz, 3-point control, pot.meter 5K-Ohm for feedback Modulating control unit MS 60,supply 24 VAC 50/60Hz, control 0-10, Vdc analog Modulating control unit MS 60,supply 24 VAC 50/60Hz, 3-point control, pot.meter 1K-Ohm for feedback Modulating control unit MS 60,supply 24 VAC 50/60Hz, 3-point control Modulating control unit MS 40,adjusting range 0,4-2,0 bar, Ø connection 1/2" Modulating control unit MS 40,supply 230 VAC 50/60Hz, 3-point control Modulating control unit MS 40,supply 24 VAC 50/60Hz, 3-point control for feedback Modulating control unit MS 20, adjusting range 0,4-2,0 bar, Ø connection 1/4" IN-3/8" OUT Modulating control unit MS 20,supply 230 VAC 50/60Hz, 3-point control Modulating control unit MS 20,supply 24 VAC 50/60Hz, control 0-10, Vdc analog Modulating control unit MS 20,supply 24 VAC 50/60Hz, control 0-10, 3-point control Modulating control unit MS 20,supply 24 VAC 50/60Hz, 3-point control with pot.meter Temperature probe PT 100 with 10m cable Temperature probe PTC 100 with 10m cable Fire protection system for crop drying (propane gas), supply 230 V Magnetic gas valve for propane gas, 230V, to place in gas supply pipe Magnetic gas valve for propane gas, 24V, to place in gas supply pipe Room/Maximum thermostat 0/60 degrees C Suspension bracket GA 60/85/110 E Suspension bracket GA 60/85/110 E

16 AGA E Direct natural gas / propane fired AGA 111 E AGA 75 E Working principle AGA 45 E Easy access for service. Working principle Direct heat with 100% efficiency. Large air throw. Fixed outlet temperature circa C (adjustable on modulating model). Clean burner because of fresh air connection. Fan for optimum combustion air. 16 Standard external air suction system with a wall connector for AGA 45/75/102/111E FEATURES Full humidity and dust proof control panel AGA 45 E/75 E. Advantages of THERMOBILE AGA series: Good heat distribution. Easy access for cleaning. Full humidity and dust proof control panel containing all electronic components. AGA 45 E/75 E/111 E, suitable for propane and natural gas. With fresh air intake to the burner. Burner with electronic ignition, ionisation protection and thermostat connection. CE-GASTEC-GOST approved. AGA 100 series available in 3 models: Optional: Protection cover for AGA 45 E and AGA 75 E Clean burner because of fresh air connection. Room ventilation is required, even for models with separate fresh air intake to the burner. (all models can be used horizontally and vertically, blowing either upwards or downwards) AGA 100 E: fit for external air suction system. AGA 102 E: Standard with an external air suction system and modulating burner. Please note: For AGA models the following pressure at the heater is required: Full humidity and dust proof control panel AGA 100 E/102 E/111 E. AGA 100 : minimum 25 millibar, maximum 100 millibar AGA 102 : minimum 25 millibar, maximum 50 millibar If the gas supply pressure is higher than the maximum a pressure regulator is required (accessory). AGA 45 E/ 75 E/ 111 E:: with external air suction system and wall connector, suitable for propane and natural gas. Please note: Before ordering please specify gas type. When using propane gas a pre-pressure regulator is required.

17 Modulating control unit. Regulating module 0-10 Volt for connection to external computer. APPLICATIONS LIVESTOCK Heating of pig- and poultry houses. AGRICULTURE Drying of agricultural products. Heating of stables and sheds. HORTICULTURE Heating of greenhouses and polytunnels (N.B. Control CO emission). SPECIAL APPLICATION: MODULATION Model AGA 102 E is a natural gas heater which, in conjuction with a modulating control unit, ensures that the burner capacity can be continuously altered to the heat requirement at any moment. With this system the heating of areas or drying of products at fluctuating outside ambient temperatures is considerably improved. Equally important is that with this model the air supply to the burner is simultaneously automatically adjusted to the burner capacity. OPERATING PRINCIPLE MODULATING AGA 102 E The heater contains a modulating gas valve in addition to a modulating air intake motor which varies the supply to the burner. A separate modulating control unit, remote from the heater, measures via a temperature probe the room temperature or the product. If the measured value does not correspond with the pre-set desired value, the modulating control system will be activated. It opens or closes the motorised gas valve to increase or decrease the heat required automatically. The pre-set and actual temperatures are digitally indicated. Several heaters can be connected to one modulating control unit, the module requires 0-10 Volt. 17 TECHNICAL SPECIFICATIONS (dimensions and weights on back page) HEAT OUTPUT APPROX. FUEL HEATED POWER GAS PART MIN. MAX. CONS. GAS M 3 /hr AIR FLOW CONSUMPTION CONNECTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr Btu/hr kw kcal/hr MIN. MAX. M 3 /hr 230V (AMPS) INCH CONNECTION AGA 45 E ,8 1 / 3, ,0 1/2 YES AGA 75 E ,8 1 / 5, ,9 1/2 YES AGA 100 E , ,8 3/4 YES AGA 102 E ,3 11, ,5 3/4 YES ** AGA 111 E ,2 1 / 7, ,3 3/4 YES 1 m3/h natural gas, 2 kg/h propane gas. 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES ANCILLARIES PART NUMBER Modulating control unit for AGA 102 E Regulating module for connecting AGA 102 E to a central computer 0-10V Pre-pressure regulator Fire protection system for crop drying (natural gas), supply 230V (24 V execution available optionally), consisting of: magnetic gas valve for natural gas, to place in gas supply pipe (execution depending on amount of gas and diameter of pipe) room/maximum thermostat 0/60 C, to place in drying installation Protection cover for gas unit AGA 45 E and AGA 75 E

18 TAS 800 E Direct oil fired with large air throw TAS 800 E Standard with external air suction system Working principle High pressure pump for diesel or paraffin. Fan for optimum combustion air. Direct heat with 100% efficiency. Large air throw. Fixed outlet temperature circa C. 18 Clean burner because of fresh air connection. Full humidity and dust proof control panel containing all vulnerable components. FEATURES Good heat distribution. Optimum combustion. With fresh air intake to the burner. Thermostat connection. depends on diameter of pipe). Room ventilation is required. Advantages of THERMOBILE TAS 800 E series: Durable phosphated body parts with stainless steel casing. Easy access for cleaning. Fresh air intake connection prevents pollution of the burner. Electric switch components in full humidity and dust proof control panel (IP 54). With burner relay, photocell flame control and thermostat connection. High pressure pump with 2-way pipe system for connection to bulk tank (max. length 50 m/height 3 m,

19 19 APPLICATIONS LIVESTOCK Heating pig and poultry houses. AGRICULTURE Drying of agricultural products. Heating of stables and sheds. HORTICULTURE Heating of greenhouses and polytunnels (N.B. Only use paraffin and control CO 2 emission). TECHNICAL SPECIFICATIONS (dimensions and weights on back page) APPROX. HEATED POWER PART MAX. NETT HEAT OUTPUT FUEL CONS. OIL AIR FLOW CONSUMPTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M 3 /hr 230V (AMPS) CONNECTION TAS 800 E* ,5 7, ,6 YES *E = Stainless steel bodywork 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

20 AT Cabinet used oil fired with flue connection and built- AT 400 C with C-kit AT 500 AT 400 AT 307 AT 306 AT 400/500(C) 100% Clean heat. Fixed outlet temperature circa C. AT % Clean heat. Fixed outlet temperature circa C. Radiation heat on three sides. AT % Clean heat. Fixed outlet temperature circa C. Radiation heat on three sides. 20 High capacity axial fan for heat distribution. Closed combustion chamber. Built-in fuel tank. Separate combustion air intake fan which can be connected to outside supply. Fan assisted air distribution. Closed combustion chamber. Built-in fuel tank. Separate combustion air intake fan which can be connected to outside supply. THERMO: Fan assisted air distribution (Accessory for AT 306). Perforated combustion chamber (not suitable near explosive vapours). Built-in fuel tank. Built in heat exchanger for high efficiency. Burner draw system for ease of lighting. C-version: Radial fan for connection to air ducting. To control chimney draught and facilitate drainage of condensate water, a T-piece with draught stabiliser and condensate trap is an essential basis of the flue stack installation. Available separately or as a part of the standard flue kit (U.K. market). FEATURES AT MODELS Advantages of THERMOBILE USED OIL HEATERS: Built-in day tank Saving on fuel expenses. Odourless combustion. Durable and safe housing with powder coating. Internal vapourising burner. Flame failure security thermostat. High/low manual heat regulation. Manual ignition system. Overheat security thermostat. Oil overflow security system.

21 in fuel tank Built-in overflow protection for burner dish. APPLICATIONS AGRICULTURE Heating workshops. INDUSTRY Heating and frost protection of halls, transit sheds and warehouses. 21 AUTOMOTIVE Heating of garage workshops. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) MAX. HEAT RATING APPROX. FUEL CONS. OIL HEATED TANK POWER FLUE PART LOW REGULATION HIGH REGULATION L/hr KG/hr AIR FLOW CAPACITY CONSUMPTION CONNECTION THERMOSTAT MODEL NIUMBERS Btu/hr kw kcal/hr Btu/hr kw kcal/hr MIN MAX. MIN MAX. M 3 /hr LITRES 230V (AMPS) Ø MM CONNECTION THERMO , AT ,0 3,0 1,7 2,5-50 0, AT ,0 3,0 1,7 2, , AT ,5 4,3 2,1 3, , AT ,8 6,2 3,2 5, , AT 400 C* ,5 4,3 2,1 3, , AT 500 C* ,8 6,2 3,2 5, , *Not available in the U.K 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES ANCILLARIES PART NUMBER T-piece with draught stabiliser from Ø 130 mm to Ø 150 mm (AT 305/306/307/400) T-piece with draught stabiliser from Ø 180 mm to Ø 200 mm (AT 500) Extra burner dish AT 305/306/ Extra burner dish AT 400/ C-kit* for AT 400/500 (ducting connector and radial fan) *Not available in the U.K.

22 BioEnergy Rapeseed oil/ linseed oil fired with flue connection and built in tank BioEnergy 1 BioEnergy 2 22 Advantages of the THERMOBILE BioEnergy series: Saves on fuel costs. Environmentally friendly. Low emissions of harmful gases. FEATURES Built in tank. BioEnergy 1 has radial fan, Bio Energy 2 has axial fan Type of fuel: rapeseed oil or flax oil. Bio Energy 2 has a built in heat exchanger for high performance. Odourless burning. High/low capacity control. Capacities of 29 and 41 kw. APPLICATIONS AGRICULTURE: Heating workshops, sheds, garages and warehouses. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) CAPACITY FUEL AIR POWER FLUE PART MIN MAX CONSUMPTION KG/H DISPLACEMENT FUEL CONSUMPTION CONNECTION MODEL NUMBER Btu/hr kw Kcal/hr Btu/hr kw Kcal/hr MIN. MAX. M 3 /H TANK/LTR AMPERAGE 230V Ø IN MM BioEnergy ,0 3, , BioEnergy ,5 4, , kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

23 PROHEAT Cabinet oil fired with flue connection and built-in fuel tank PROHEAT 40 PROHEAT 60 PROHEAT 80 Low-noise radial fan. Large air volumes guarantee quick heating. FEATURES Advantages of THERMOBILE PROHEAT series: Capacities of 42, 64 and 84 kw net, with an efficiency of 91%. Plug-and-play principle, quick and easy to install. Control panel fitted with switches and warning lights. Four-sided adjustable outlet opening guarantees equal air distribution and connection for air duct. Combustion chamber and heat exchanger of heat resistant steel. Standard equipped with summer/winter circuit for heating or ventilation. APPLICATIONS AUTOMOTIVE: Heating of garage workshops. Standard equipped with thermostat. 23 AGRICULTURE: Heating of workshops. INDUSTRY: Heating and frost protection of halls, transit sheds and warehouses. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) APPROX. FUEL HEATED CAPACITY POWER FLUE PART MAX. NETT HEAT OUTPUT CONS. OIL AIR FLOW FUEL TANK CONSUMPTION CONNECTION THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr L/hr KG/hr M3/hr LTR 230V (AMPS) Ø MM CONNECTION PROHEAT ,7 4, ,6 120 BUILT-IN PROHEAT ,2 6, ,7 150 BUILT-IN PROHEAT ,5 8, ,0 180 BUILT-IN 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr

24 COOLSPACE Air coolers COOLSPACE 1 COOLSPACE 2 24 Anti lime and algae tablets Advantages of the THERMOBILE Coolspace series: Evaporative cooling is 7 to 10 times more economical than a conventional system by 14 degrees Celsius or more. Portable and robust and does not use hazardous freon. Spot cooling effect, saves money and energy. Coolspace can cool air temperatures above 30 degrees Celsius Outlet panel FEATURES High cooling capacity. Very low maintenance. Fits through doors. Optional hose connection. Water used as the cooling agent. APPLICATIONS cooling garage workshops and warehouses, dry cleaners, marquees. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) Outside air is drawn through the cooling material which is saturated internally using tap water at the same time. The fan guides warm air through the cooling material thereby cooling the air. POWER SUPPLY MOTOR AMP AIR DISPLACEMENT PUMP FAN MODEL PARTNUMBER VOLT HERZ MAX M 3 /H AMP. WATT COOLSPACE , , COOLSPACE , , SPECIAL ACCESSORIES PARTNUMBER 4 anti lime tablets anti algae tablets Outlet panel round 900 for Coolspace

25 PRODRY Dehumidifiers PRODry 35 PRODry 55 PRODry 80 FEATURES Compact dehumidifiers with high capacities. Heavy-duty handle makes transport easier. process. Low-noise compressor and fan. Simple operation. Pro Dry 35/55 equipped with condensate collection tank with overflow prevention and connection for fixed drainage (ProDry 80 standard). Quick dehumidification of the air. Control panel with warning lights for defrosting and full tank. Fully automatic operation with electronic control of condensation and defrosting Equipped with hour counter (hygrostat optional). Advantages of THERMOBILE PRODRY series: 25 APPLICATIONS Drying of flooded basements, halls and archives. Drying of structural works. To dry damp areas. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) CAPACITY OPERATING AIR POWER TANK PART LTR/24 hr CAPACITY LTR/24 hr RANGE FLOW CONSUMPTION CAPACITY MODEL NUMBER MAX. 25 C/65% RH 30 C/85% RH % RH C M3/hr 230V (AMPS) LTR PRODRY ,2 26, ,3 6 PRODRY ,5 53, ,5 6 PRODRY ,0 80, ,8 - Hose a metre

26 BX/CH/VTB/PROHEAT 18 Electric heaters ProHeat 18 CH 18 CH 12 CH 3 BX 15 BX 9 BX 3 VTB VTB 9000 VTB 3000 Advantages of THERMOBILE ELECTRIC HEATERS Can be used instantly where power is available Comfortable heat Suitable for open areas Working principle 26 FAN HEATERS BX: ELEKTROHEATER ProHeat 18 ELECTRO CANONS VTB/CH Built-in thermostat. (2 steps on BX 9). Stainless steel elements. 100% Clean and dry heat. Fixed outlet temperature circa C Selector switch for continuous frost protection with ventilation or space heating. Built-in thermostat. Stainless steel elements. Radial fan for larger heat throw. 100% Clean and dry heat. Fixed outlet temperature circa C. Space and spot heating. Higher outlet temperature. Built-in thermostat. Axial fan (CH) Stainless steel elements. Radial fan for larger heat throw. 100% Clean and dry heat. Radial fan for extra heat throw (VTB). Fixed outlet temperature circa C. Space and spot heating. Higher outlet temperature. Combined frame suitable for suspension as well as carrying. Stackable FEATURES Three sided outlet opening. Bodywork in stainless steel. 9 kw and 18 kw capacity. Hose connection possible. VTB with wheels. CH 12/18 with wheels. VTB 3000/9000 with hand grip CH 3/12/18 with hand grip.

27 Control panel ProHeat 18 Built in 2-step thermostat. Hose system to reach difficult areas. ELECTRO HEATERS ARE ESPECIALLY APPLICABLE IN ROOMS WHERE: available oxygen cannot be spared for combustion. no open flame is allowed. clean dry heat is essential. low noise level is required. an odour free environment is necessary. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) SEE PAGE FOR ACCESSORIES APPLICATIONS AGRICULTURE Heating of livestock areas, dairy parlours, workshops and packing sheds. HORTICULTURE Heating of sorting areas and greenhouses. INDUSTRY Heating of offices, canteens, stores, warehouses etc. BUILDING INDUSTRY Heating and drying out rooms, often in conjunction with a dehumidifier. ADJUSTMENT POWER OUTLET PART HEAT OUTPUT HEATED AIR FLOW RANGE DELTA T CONSUMPTION CONE THERMOSTAT MODEL NUMBER Btu/hr kw kcal/hr VOLTAGE MIN. M 3 /hr MAX.M 3 /hr kw C (AMPS) Ø MM CONNECTION ProHeat 18 3) x /26,0-400V - BUILT-IN. BX 3 1) x ,9/13,2-230V - BUILT-IN. BX 9 2) x ,5-9 36/28 6,8/13,3-400V - BUILT-IN. BX 15 3) x , ,1/21,9-400V - BUILT-IN. VTB )* x ,0-230V 98 BUILT-IN. VTB 3000 TUK** 1) , x , ,0-240V 98 BUILT-IN VTB ) x , ,5/13,0-400V 120 BUILT-IN. VTB ) x /60/100 8,0/14,0/23,0-400V 150 BUILT-IN. CH x V CH x V CH x , V 300-1) with 230V cable and plug 2) with 400V cable and 16 Amps plug 3) with 400V cable and 32 Amps plug * Not available in the U.K. ** Only available in the U.K. 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr 27

28 VAL Infra-red radiant oil fired NEW VAL 6-1 STEP/VAL 6-2 STEP VAL 6 KB VAL MIDI VAL DAYSTAR VAL with fuel level indicator. (except VAL 6 KB). Vertical inclining with locking mechanism. Folding push bar VAL MIDI Working principle Vertical inclination infra-red heat screen. High pressure burner. Fuel tank for a minimum of 10 hours burning duration, (VAL 6 KB 16 hours burning duration). Almost odourless without air flow. (20 C at 3 m). Fixed radiation temperature circa 150 C at 70 cm Spot heating (and limited space heating). FEATURES VAL6-2 STEP with a 2 step burner Photocell flame control. Thermostat operation is possible. 230V/50Hz connection. Room ventilation is required. Oil preheating set VAL 6 (optional) Advantages of VAL INFRA-RED HEATERS: No air flow. Odourless. Personal (and limited space) heating Mobile framework with rotational heat screen on VAL 6-1 STEP. (DAYSTAR portable) High pressure burner with 15 sec. prepurge control system and 180 sec. postpurge. Combustion chamber of fibre ceramic. VAL 6 KB with oversized tank for 16 burning hours.

29 29 INFRA-RED HEATERS ARE PARTICULARLY SUITABLE WHEN: No air flow is desired. Only a part of a room needs to be heated. TECHNICAL SPECIFICATIONS (dimensions and weights on back page) APPLICATIONS AGRICULTURE Spot heating in large sheds. HORTICULTURE Spot heating in work areas. INDUSTRY BUILDING INDUSTRY Spot heating on work sites. MOTOR TRADE Spot heating in workshops, transit sheds and warehouses. Warming up and defrosting machines. Workshop personnel heating. Drying and curing in body shops. HEAT OUTPUT APPROX. FUEL CONS. OIL TANK POWER PART MAX. L/hr KG/hr CAPACITY CONSUMPTION MODEL NUMBER Btu/hr kw kcal/hr MAX. MAX. LITRES 230V (AMPS) VAL 6-2 STEP ,8 3,2 40 0,25 VAL 6-1 STEP ,8 3,2 40 0,25 VAL 6 KB ,8 3,2 60 0,25 VAL MIDI ,7 2,3 38 0,25 VAL DAYSTAR ,7 1,3 10 0,5 1 kw= 860 Kcal/hr 1 kw=3413 Btu/hr 1 kw=3,6 Mj/hr 1 KG/hr=1,2L/hr SEE PAGE FOR ACCESSORIES

30 THERMOBILE ACCESSORIES THERMOSTATS RT 1 RT 2 RT 4 IT 1 DA 1 SPECIFICATIONS SUITED FOR PART NUMBER RT1, room thermostat 0/37 C with 5 m cable and plug, IP 54 TA, TAS, ITA, ITAS, IMA, Switching differential ± 2 degrees. IMAC, GA, AGA RT 2, as RT 1, with 10 m cable, IP 54 TA, TAS, ITA, ITAS, IMA, IMAC, GA, AGA RT4, room thermostat -10/+40 C with 10 m cable, IP 54 TA, TAS, ITA, ITAS, IMA, For frost protection from temperatures below 0 C. IMAC, GA, AGA IT1, duct thermostat 0/100 C with 6 m cable and plug. TA, TAS, ITA, ITAS, IMA, Switching differential ± 1,5%. For control of IMAC, GA, AGA temperature in ducting system. DA1, dual connection for thermostat. TA, TAS, ITA, ITAS, IMA For control of 2 heaters on 1 thermostat. IMAC, GA, AGA Extension cable 10 m for thermostat, with plug. RT1, RT2, RT4, IT SWITCHING / ELECTRONICS 30 Transformer set for electrical connections without 0. IMA 111/ Transformer set for electrical connections without 0. IMAC 2000 E Soft-starter set for gradual run-in of fan. IMA 111/ Earth leakage switch. IMAC 2000 E Hour counter. IMA 61/111/ Timer. IMA 61/111/ Tank heating set TH 1 T/TA 40, ITA 30/ Tank heating set TH 2 T/TA 80, ITA TRANSPORT AND STORAGE Wheel set T/TA 16 Set of air wheels Fork truck slots IMA Set of standard wheels with axle + tow handle + base. T/TA Set of air wheels with axle + heavy duty handle for metal tank. T/TA Set of air wheels with axle parts. T/TA Set of air wheels for synthetic tank T/TA Set of air wheels with axle parts. IMA 61/111/ Set of air wheels with axle parts + base. T/TA 40/80,ITA 40/ Set of air wheels ITA Set of air wheels ITA Set of air wheels ITA Set of standard wheels with axle + base. GA 60/85E Set of standard wheels with axle + base. GA 110E Stacking unit. G/GA Fork truck slots. IMA Fork truck slots. IMA 111/

31 THERMOBILE ACCESSORIES WARM AIR TRANSPORT AND ANCILLARIES Distribution Head for ITA For IMA models For IMAC models DISTRIBUTION HEADS FOR ITA OUTLET OPENINGS SUITED FOR PART NUMBER To be connected to outlet cone of 2x300 mm ITA 45/ heater. Including 1 quick release clamp and 2 hose clips. DISTRIBUTION HEADS FOR IMA OUTLET OPENINGS SUITED FOR PART NUMBER To be fixed instead of 2x300 mm IMA standard outlet panel (ex works, 2x365 mm IMA if necessary). 4x300 mm IMA x450 mm IMA Excluding clamps. 4x300 mm IMA x365 mm IMA x450 mm IMA x500 mm IMA DISTRIBUTION HEADS FOR IMAC OUTLET OPENINGS SUITED FOR PART NUMBER 3-6x300 mm IMAC 2000 E x500 mm IMAC 2000 E x500 mm IMAC 2000 S x300 mm IMAC 2000 S CONNECTION PIECES FOR ITA SPECIFICATIONS SUITED FOR PART NUMBER To be connected to outlet cone of Connection piece Ø 300 mm Hose ITA heater to protect hose from too Connection piece Ø 400 mm, incl.2 high temperatures. Including clamps quick release clamps Hose ITA 45/ Connection piece.ø 365 Hose ITA 45/ Reducing piece Ø 400-Ø 365 mm Hose ITA 40/ Polyamide with pvccoating, -5/+100 C Glass fibre with neoprene coating, -20/+140 C Connection pieces for hose with sleeve Rubber quick release clamps Hose clips, steel quick release clamps Y-piece T-piece Various reducing and coupling pieces WARM AIR TRANSPORT HOSES LENGTH IN M Ø IN MM SUITED FOR PART NUMBER Temperature resistant at -20/+140 C VTB ITA 30, distribution head ITA 45/ ITA 40/ Temperature resistant at -5/+100 C VTB VTB distribution head IMA 61/111/185, IMAC 2000 E distribution head IMA 111/ ITA 45/ IMA IMA 111, distribution head IMA IMA 185, IMAC 2000 E /2000 S /4000 E ATTENTION: Hoses produce BACK PRESSURE which can cause the heater to switch off. Avoid too LONG and/or too NARROW hoses and too many BENDS. Heaters with RADIAL fans are especially suited.

32 THERMOBILE ACCESSORIES CONNECTION PIECES FOR HOSES WITH SLEEVE SPECIFICATIONS PART NUMBER To connect hoses. Including hose clips. Connection piece Ø 300 mm Connection piece Ø 365 mm Connection piece Ø 400 mm RUBBER QUICK RELEASE CLAMPS FOR HOSES WITH END RING FOR HOSE DIAMETER PART NUMBER To connect hoses and if desired to fix to 300 mm the heater flange. 365 mm mm mm mm GALVANISED HOSE CLIPS FOR HOSE DIAMETER PART NUMBER To fasten hoses to the heater flange or mm to a connection piece mm mm mm mm STEEL QUICK RELEASE CLAMPS FOR HOSE DIAMETER PART NUMBER Especially suited to fasten hoses to 160 mm ITA models. 305 mm mm mm DISTRIBUTION PIECES FOR HOSES SUITED FOR HOSES OF PART NUMBER Y-piece 1x600 mm / 2x600 mm. IMA 185/IMAC 2000 E/S T-piece 45 1x500 mm / 1x500-1x300 mm. IMA T-piece 45 1x600 mm / 1x600-1x300 mm. IMA 185/IMAC 2000 E/S Endcover for T-piece Ø 500 mm. IMA Endcover for T-piece Ø 600 mm. IMA 185/IMAC 2000 E/S RECIRCULATION 32 Recirculation hoses Recirculation flanges IMAC 2000 E Recirculationset IMA Recirculation fans, TBE models Recirculation fans, TTV models RECIRCULATION HOSES LENGTH IN M Ø IN MM SUITED FOR PART NUMBER With steel spiral to prevent IMAC 2000 E compression IMAC 2000 E/2000 S E/4000 E IMAC 2000 E/2000 S E/4000 E RECIRCULATION FLANGES FOR HOSE DIAMETER SUITED FOR PART NUMBER To be used in combination with supplied closed panel, to be 3x300 mm IMAC 2000E fixed instead of standard suction panel. 1x600 mm IMAC 2000E Recirculation flange and hose 1x 600mm IMAC 2000S RECIRCULATIONSET 400 IMA IMA IMA

33 THERMOBILE ACCESSORIES RECIRCULATION FANS Provide, in combination with heaters, extra ventilation and a better distribution of warm air. TBE models for HORTICULTURE TTV models on support for (BUILDING) INDUSTRY and RENTAL BUSINESS Especially suited for serial ventilation, parallel Especially developped for use under very severe conditions in ventilation and recirculation systems. the (building) industry and rental business FEATURES FEATURES Suited for suspension. Easily portable. Easily stackable. Easily stackable. Shock proof synthetic fan housing. Shock proof synthetic fan housing. Double-sided grill according to CE-standard. Double-sided grill according to CE-standard. Isolation class F, IP 55. Isolation class F, IP 65. OPTIONS With cable and plug. 3-Step control regulator on rear of motor. ( ) Adjustable support. Plug and 4 m cable. Protected 3-step control regulator. 60 Hz motors. OPTIONS 3-Phase motors. Hose connection piece to be used on either side. AIR POWER POWER Ø IN FLOW CONSUMPTION AIR THROW NOISE LEVEL MODEL W MM RPM M 3 /hr (AMPS) 230V/50Hz IN M db (A) PART NUMBER TB4E/40Q , TB4E/50Q , TB6E/40Q , TB6E/50Q , TTV , TTV , OPTIONS SUITED FOR PART NUMBER Hose connection piece 450 mm TTV Hose connection piece 550 mm TTV Hose 550 mm, L=7,6 m TTV Hose 450 mm, L=7,6 m TTV SUCTION OF FRESH AIR 33 Fresh air connection flanges Fresh air suction hoses Wall connector FRESH AIR CONNECTION FLANGES FOR SEPARATE BURNERS TYPE OF BURNER SUCTION DIAMETER SUITED FOR PART NUMBER Prevents lack of oxygen and Oil burner SLW mm IMA pollution of the burner in dusty areas. Oil burner SLW 44/SLW mm IMA 111/185, IMAC 2000 E To be mounted on burner. FRESH AIR SUCTION HOSES LENGTH IN M Ø IN MM SUITED FOR PART NUMBER For suction of clean fresh air. AGA 45/75/102/111 E, To be mounted on connection GA 60/85/110,TAS 800 E flange IMA STAINLESS STEEL WALL CONNECTOR WITH RAINCAP CONNECTION DIAMETER SUITED FOR PART NUMBER Prevents raining in and back pressure. 100 mm Suction hoses GA 60/85/110 E, AGA 45/75/102/111 E, TAS 800 E

34 THERMOBILE ACCESSORIES FUEL SUPPLY Conversion kit Oil supply unit Connection/reduction set SPECIFICATIONS SUITED FOR PART NUMBER Conversion kit from 1-way to 2-way pipe system, for suction from bulk tank, maximum T, TA, ITA length 50 m/height 3 m (depends on diameter of pipe).to be mounted on fuel pump. Oil supply unit 40 litres to transport oil under pressure from bulk tank to All oil fired models (except VAL ) or more heaters, to maximum height of 30 m. As above, except for 80 litres capacity. All oil fired models (except VAL ) Needed per heater: Connection/reduction set with magnetic valve. All oil fired models (except VAL ) Oil filter without connection for return to tank (only needed when using 2 way pipe system). Oil preheating set VAL SPECIFICATIONS SUITED FOR PART NUMBER Oil preheating with cable. Burner SLW Oil preheating with cable. Burner SLW 44/ Oil filter with water separation and bracket for return pipe. IMA Oil filter with water separation, interchangeable with current filter. TAS 800 E Multitanks Connection set for gas bottles SPECIFICATIONS SUITED FOR PART NUMBER Multitank 700 liter All oil fired models Multitank 1000 liter All oil fired models Suction set for Multitanks Multitanks Raincover for Multitanks Multitanks Connection set for gas bottles, to increase evaporating capacity. G, GA

35 THERMOBILE ACCESSORIES FLUE STACKS* Pipes Rain caps Bushing set for flue DESCRIPTION LENGTH IN M Ø IN MM SUITED FOR PART NUMBER Galvanised pipes* ITA, ProHeat ITA 75, IMA 61, ProHeat IMA 111/185, IMAC 2000 E/S IMAC 4000 E Galvanised rain caps.* 150 ITA, ProHeat ITA 75, IMA 61, ProHeat IMA 111/185, IMAC 2000 E/S IMAC 4000 E Galvanised bends 45 * 150 ITA, ProHeat ITA 75, IMA 61, ProHeat IMA 111/185, IMAC 2000 E/S IMAC 4000 E Bushing set for flue in polytunnels. 150 ITA 40/45/ ITA IMA 111/185, IMAC 2000 E/S Reducer ProHeat * Stainless steel systems available for U.K. market. SERVICE TESTING EQUIPMENT 35 SPECIFICATIONS PART NUMBER CO2 measuring set Pressure gauge 0-25 bar 1/8" BSP Pressure gauge 0-25 bar 1/4" BSP, glycerol filled / Pressure gauge set (with overpressure protection) Pressure gauge 0-0,6 bar Soot pump complete with paper and lubricant Testing paper for soot pump Filling liquid for CO2 meter Intertest for oil heaters with SATRONIC burner relays Testing unit for SATRONIC oil burner relays Testing unit for SATRONIC gas burner relays Smokegas thermometer Chimney gas thermometer, Brigan Spray can with paint, colour red, content 400 ml Spray can with paint, colour light grey, content 400 ml Spray can with paint, colour anthracite, content 400 ml