Operating Instructions Air Conditioner

Transcription

1 Operating Instructions Air Conditioner ANTI-BACTERIAL FILTER Indoor Unit CS-RE9NKA CS-RENKA Outdoor Unit CU-RE9NKA CU-RENKA 中文 在操作空調器前 請細讀此操作說明 並 保存此書以備日後參考 ENGLISH Before operating the unit, read these operating instructions thoroughly and keep them for future reference. IDE ration gu Prepa ol 打開電 ICk Contr te /QU 關上後 Remo 指南 Outdoor Unit CU-RE9NKA 簡易 器的 準備 Indoor Unit CS-RE9NKA CS-RENKA CU-RENKA 簡易指南 QUICK GUIDE por naso atio nic.n n et/ E //pa Cor aso site: Pan Web 溫度 the 需要的 desired Panasonic Appliances Air-Conditioning (Guangzhou) Co., Ltd. 0. Unauthorized copying and distribution is a violation of law. Printe d in China Select 設定所 http: nic mode. TEM P temper ature. MOD HEAT COO L AUTO DRY the 需要的 desired Select 選擇所 模式 作 operati on. the op 開始/ Start/st 停止操 OFF /ON F5685 F 9-00 遙控 裝入A 池蓋 Insert AA或 Remo AAA or R0電 ve R0 the 池 可 battery batteri 蓋 Close es 使用大 cover (can the be 約一年 cover used ~ 時間 year) Operating Instructions Air Conditioner F56859 F56859_COVER.indd 0--8 :09:9

2 中文 感謝您購買 Panasonic 空調器 目錄操作條件... 安全措施...4~5 遙控器...6~7 室內機...8 故障檢修...9 信息... 6~7 產品規格... 8 簡易指南... 封底 注 : 本操作說明書裡的圖解僅作為說明用途, 可能與實際產品有所區別 若因為產品改進而發生變更, 恕不另行通知 ENGLISH Thank you for purchasing Panasonic Air Conditioner TABLE OF CONTENTS OPERATION CONDITION... SAFETY PRECAUTIONS... 0~ REMOTE CONTROL... ~ INDOOR UNIT... 4 TROUBLESHOOTING... 5 INFORMATION... 6~7 PRODUCT SPECIFICATION... 8 QUICK GUIDE...BACK COVER NOTE: The illustrations in this manual are for explanation purposes only and may differ from the actual unit. There are subjected to change without notice for future improvement.

3 操作條件 在以下溫度範圍內使用空調器 製冷 製暖 溫度 ( C) 室內室外 *DBT *WBT *DBT *WBT 最高溫度 4 6 最低溫度 6 6 最高溫度 最低溫度 * DBT: 乾球溫度 * WBT: 濕球溫度 OPERATION CONDITION Use this air conditioner under the following temperature range Temperature ( C) Indoor Outdoor *DBT *WBT *DBT *WBT COOLING Maximum 4 6 Minimum 6 6 HEATING Maximum Minimum * DBT: Dry bulb temperature * WBT: Wet bulb temperature

4 安全措施 為了防止個人傷害, 危害其他人或財物的損失, 請遵守以下的說明 因不遵守指示導致的錯誤操作將引起傷害或損壞, 其嚴重程度分類如下 : 警告 此標識所示的行為有可能導致嚴重傷害或死亡 注意 此標識所示的行為有可能導致傷害或財產損失 要遵守的指示按下列符號分類 : 此符號表示被禁止的行為 這些符號表示務必執行的行為 室內機和室外機 警告 此空調不適合殘疾 感應欠佳或智障, 經驗與知識不足的人士 ( 包括兒童 ) 使用 除非負責其安全的監督人從旁監督或指示如何正確使用此空調 務必監督兒童以確保他們不會玩弄本機 清洗空調內部, 維修, 安裝, 拆卸和重新安裝時, 請咨詢授權經銷商或專業人員 不當的安裝和操作會導致漏電, 觸電或火災 與授權經銷商或者專業人員確認有關指定的製冷劑類型 使用指定以外的製冷劑會損壞產品, 引起爆炸和造成傷害等 切勿將空調安裝在易爆, 易燃的環境中 否則會引起火災 切勿把手指或其他物件插入室內機和室外機, 以免受到旋轉部件傷害 閃電時切勿觸摸室外機, 否則會導致觸電 切勿長時間受冷氣流直接吹拂, 避免過冷 切勿坐 踩踏或放置任何東西在空調上, 以免意外摔跤 遙控器 切勿讓嬰兒和小孩玩遙控器, 以免不小心吞下電池 室內機 空氣吸入口 電源 電源 切勿採用改裝電線, 結合電線, 延長電線或非指定的電線, 以免過熱及釀成火災 遙控器 空氣吹出口 空氣吸入口 為防止過熱, 火災或者觸電 : 切勿與其他設備共用一個電源插座 切勿用潮濕的手操作 不要反復彎曲電源線 切勿直接通過插入或拔出插頭的方式開關機 空氣吹出口 室外機 4

5 警告 注意 電源 室內機和室外機 如果電線損壞, 必須由製造商或其服務代理商或具有同等資格的合格人員進行更換, 避免產生危險 強烈建議您安裝接地漏電電源斷路器 (ELCB) 或殘餘電流裝置 (RCD), 避免造成觸電危險或釀成火災 為防止過熱, 火災或者觸電 : 務必正確插入插頭 應用乾布定期清潔電源插頭上的塵埃 當出現異常 / 失靈情況, 請切斷電源並拔除電源插頭 ( 冒煙 / 火災 / 觸電的危險 ) 異常現象 / 失靈的例子 電源斷路器頻繁跳閘 散發燒焦味 發現異常聲音或者振動 室內機漏水 電源線或插頭異常發熱 風速不能控制 空調立即停止運轉, 即使運轉開關已打開 即使操作已被停止, 風扇仍然運轉 請盡快聯繫當地經銷商維修 更換或安裝電源插頭必須由授權 / 合格人員進行 主導電體內的電線按線色區 分如下 : 電線顏色可能會因各個國家代碼的標準不同而有所區別 本設備必須接地以防止觸電或火災 為免觸電, 請在下列情況下切斷電源, 並拔除電源插頭 : - 清洗或維修之前 - 長期不使用時 - 異常強烈閃電時 遙控器 切勿用水 苯 稀釋劑 潔亮粉末等清洗室內機 以免損壞或者造成空調腐蝕 切勿用作保存精密儀器 食物 動植物 美術品和其他用途 這樣會造成變質 切勿在氣流出口處使用任何易燃器具, 以免引起火災 切勿將動植物直接放在氣流出口處, 以免受到傷害 切勿觸摸尖銳的鋁散熱片, 以免受到尖銳部件傷害 當在地面打蠟時切勿開啟室內機 打蠟完畢之後, 請先讓房間良好通風再操作本機 切勿將空調安裝在油煙重的場所 避免空調受損 切勿為了清洗而拆開空調, 以免受傷 切勿站在不穩的凳子上清洗空調, 以免受傷 切勿將花瓶或儲水容器放在空調上 水會進入空調降低絕緣性能, 可能引起短路 切勿在製冷模式下長時間打開門或窗戶 確保排水軟管連接正確和保持排水口乾淨 暢通 否則可導致漏水 長期使用後或使用燃燒器具, 要定期讓房間通風 長期使用後, 請注意安裝支架是否有損壞, 以免主機墜落 切勿使用可充電電池 (Ni-Cd) 它會損壞遙控器 防止遙控器失靈或損壞 : 如果準備長期不使用本機, 務必將電池取出 更換電池時, 務必採用同類型的新電池並對準電極 中文 電源 請勿拉扯電源線來拔除插頭, 否則會導致觸電 5

6 ANTI-BACTERIAL FILTER 遙控器 5 調節垂直風向 (5 級選擇 ) 最遠距離 : 8 米 AIR SWING 在製冷模式下, 如果設定為自動風向時, 導風板將自動向上 / 下擺動 在製暖模式下, 如果設定為自動風向時, 導風板將固定在設定的位置 6 快速達到設定溫度 強勁功能可以快速達到您設定的溫度 按遙控器的按鈕 指示燈 啟動或關閉主機 ( 綠色 ) ( 橙色 ) ( 綠色 ) ( 紅色 ) 7 享受寧靜的環境 靜音功能可以減輕由氣流產生的噪音, 為您提供一個寧靜的環境 強勁功能和靜音功能不能同時啟動 8 按下以恢復遙控器的出廠設定 9 在正常操作下不使用 請留意遙控顯示屏上的 OFF 顯示以防本機不正當地啟動 / 停止 設定溫度 選擇範圍 :6 ~ 0 在所建議的溫度內操作本機可為您節省能源 HEAT : 0 ~ 4 COOL : 6 ~ 8 DRY :比室溫低 ~ 選擇操作模式 AUTO - 給您方便 在選擇運轉模式下電源指示燈閃爍 在自動運轉模式下, 空調器會根據室內溫度以及遙控器設定溫度自動選擇運轉模式 HEAT - 享受溫暖 製暖時, 空調需要一段時間進行預熱 在預熱期間電源指示燈閃爍 COOL - 享受清涼 為了在製冷模式下降低耗電量, 請拉上窗簾以減少陽光直接照射和室外熱氣進入 DRY - 為您創造乾爽的環境 空調以低速運轉, 進行極為柔和的製冷運轉 4 7 遙控器顯示屏 選擇風量 (5 級選擇 ) FAN SPEED 選擇自動風量時, 室內機風扇風量將根據運轉模式自動調節 9 8 6

7 設定預約時間 ( 小時定時設置 ) 當您要空調器在預設的時間自動開啟或關閉時 同時設定定時開機 / 關機時間例如, 使空調器在 7 小時後開機, 再經 0 小時後關機 選擇同時設定定時開機 / 關機, 按 下鍵 按住鍵, 調節到您希望的開機時間 按住鍵, 調節到您希望的關機時間 這種模式只能在空調器處於關機的狀態下進行設置 中文 定時關機例如,5 小時後關閉空調器 選擇定時關機, 按一下鍵 按住鍵, 調節到您希望的關機時間 定時關機只能在空調器運行時進行設置 定時開機例如, 小時後啟動空調器 選擇定時開機, 按一下鍵 按住鍵, 調節到您希望的開機時間 定時開機只能在空調器關機時進行設置 同時設定定時關機 / 開機時間例如, 使空調在 小時後關機, 再經過 4 小時後開機 選擇同時設定定時關機 / 開機, 按 下鍵 按住鍵, 調節到您希望的關機時間 按住鍵, 調節到您希望的開機時間 這種模式只能在空調器處於開機的狀態下進行設置 確認定時設置 按一下鍵, 定時設定完成 取消定時設置 再次按一下 鍵, 取消定時設定 定時模式下, 室內機的定時指示燈點亮 當設定了定時開機時, 為了在您設定的時間內達到您所設定的溫度, 空調器會在設定的時間提前運轉 如果在定時模式下按按鈕, 定時設定將被取消 如果手動取消定時或遇上停電取消定時 請電力恢復後重新按以上步驟設定 7

8 室內機 注意 進行清洗前, 請切斷電源并拔除插頭 切勿觸摸鋁翅片, 鋒利部分會造成傷害 清洗說明 切勿使用稀釋劑 苯 潔亮粉 僅使用肥皂 ( ph7 ) 或中性家用清潔劑 切勿使用溫度高過 40 的水 4 提示 為確保本機發揮最佳性能, 則需在固定時間進行清潔保修 注意 : 如果採用化學抹布來擦拭空調, 請遵循化學抹布的使用說明 室內機 使用柔軟的乾布輕輕擦拭 前面板 取下前面板 向上提起拉開以取出面板 輕洗並晾乾 安裝前面板 按壓面板兩端下部即可將面板完全裝好 接收器 4 鋁翅片 5 水平風向調節葉片 可手動調節 警告 空調運轉時, 不要把手指伸進太深, 以免風扇打傷手指 6 垂直風向導風板 切勿用手調節 7 自動運轉關 / 開按鈕 當遙控器遺失或失靈時使用 動作按一下持續按下直到聽見一聲 嗶 ", 然後鬆開持續按下直到聽見 嗶嗶 " 兩聲, 然後鬆開按下按鈕以關閉 模式自動 製冷 製暖 8 空氣過濾網 經常清洗過濾網 用水輕輕清洗 / 沖洗過濾網, 以免損壞過濾網的表層 在陰涼處徹底晾乾過濾網, 遠離火源並避免陽光直接照射 請更換損壞的過濾網 9 抗菌過濾網用吸塵器清除灰塵 建議每 6 個月清潔一次過濾網 使用大約 0 年後或濾網損壞時, 請更換新的濾網 8

9 故障檢修 以下現象並非故障 現象室內機散發出霧氣 運轉時, 聽見類似流水聲 室內有異味 在自動風量設定中, 室內風扇時開時停 重新啟動後, 運轉延遲幾分鐘 室外機滴水或有蒸氣現象 空調器在恢復供電後, 自動重新啟動 在製暖運轉時室內風扇偶爾停止轉動 在打開空調器以前電源指示燈會閃爍 運轉時發出吱嗄噪聲 製冷導致冷凝現象 機內冷媒流動的聲音 原因 這可能是牆壁 地毯 傢俱或衣物散發出來的氣味 這是為了排除周圍所發出的異味 此延遲用於保護本機壓縮機 這是配管表面水蒸氣冷凝或蒸發的現象 這是來電自動重啟功能 空調器在運轉過程中如果遇到停電而停機的情況, 空調器將在恢復供電後自動重啟, 並按停電前所設定的模式運行 這是為了避免吹出冷風 這是當開機定時預約時間被設定時準備開始操作的初步工作 溫度變化造成空調器膨脹或收縮 中文 在通知維修之前請先檢查以下各項 現象 製暖 / 製冷運轉無法有效地操作 運轉時產生噪音 遙控器不能操作 ( 顯示屏變暗或傳輸信號微弱 ) 空調器不能啟動 空調器沒有從遙控器收到信號 檢查 設定正確溫度 關上所有房門及窗戶 清洗或更換過濾網 清除阻擋空氣吸入口和吹出口的任何阻礙物 檢查空調安裝是否傾斜 妥善關閉前面板 正確地安裝電池 更換電力微弱的電池 檢查是否是電流斷路器跳開了 檢查是否已設定預約時間 確認接收器不受阻礙 某種類型的螢光燈可能會影響訊號接收 請咨詢最近的授權經銷商 空調停止運轉, 並且定時指示燈閃爍 使用遙控器檢索錯誤代碼 / 按溫度調節按鈕直到您聽見 嗶 " 聲, 然後記下故障代碼 QUIET POWERFUL 按住此鍵 5 秒 A SELECT B SET/CANCEL 再次按住此鍵即可退出故障診斷模式 4 關閉空調並將故障代碼告知您最近的經銷商 9

10 SAFETY PRECAUTIONS To prevent personal injury, injury to others, or property damage, please comply the following. Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below: WARNING This sign warns of death or serious injury. CAUTION This sign warns of injury or damage to property. The instructions to be followed are classified by the following symbols: This symbol denotes an action that is PROHIBITED. Remote Control These symbols denote an action that is COMPULSORY. Indoor Unit Air Inlet Air Outlet Outdoor Unit Air Inlet Power Supply Air Outlet WARNING INDOOR UNIT AND OUTDOOR UNIT This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Please consult authorized dealer or specialist to clean the internal parts, repair, install, remove and reinstall the unit. Improper installation and handling will cause leakage, electric shock or fire. Confirm to authorized dealer or specialist on usage of specified refrigerant type. Using of refrigerant other than the specified type may cause product damage, burst and injury etc. Do not install the unit in a potentially explosive or flammable atmosphere. Failure to do so could result in fire. Do not insert your fingers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. Do not expose yourself directly to cold air for a long period to avoid excess cooling. Do not sit or step on the unit, you may fall down accidentally. REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. POWER SUPPLY Do not use modified cord, joint cord, extension cord or unspecified cord to prevent overheat and fire. To prevent overheating, fire or electric shock: Do not share the same power outlet with other equipment. Do not operate with wet hands. Do not over bend the power supply cord. Do not operate or stop the unit by inserting or pulling out the power plug. 0

11 WARNING CAUTION POWER SUPPLY If the supply cord is damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. It is strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to prevent electric shock or fire. To prevent overheating, fire or electric shock: Insert the power plug properly. Dust on the power plug should be periodically wiped with a dry cloth. Stop using the product if any abnormality/failure occurs and disconnect the power plug or turn off the power switch and breaker. (Risk of smoke/fire/electric shock) Examples of abnormality/failure The ELCB trips frequently. Burning smell is observed. Abnormal noise or vibration of the unit is observed. Water leaks from the indoor unit. Power cord or plug becomes abnormally hot. Fan speed cannot be controlled. The unit stops running immediately even if it is switched on for operation. The fan does not stop even if the operation is stopped. Contact your local dealer immediately for maintenance/repair. Replacement or installation of power plugs shall be performed by authorized/qualified personnel only. The wires in this mains lead are coloured in accordance with the following code: Terminals Red Black Green/Yellow wires live neutral earth colours (IEC Standard) brown blue green-yellow Wiring colour may vary depending on a country wiring code s standard. This equipment must be earthed to prevent electric shock or fire. INDOOR UNIT AND OUTDOOR UNIT Do not wash the indoor unit with water, benzene, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation. Do not expose plants or pet directly to airflow to avoid injury, etc. Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto unstable bench when cleaning the unit to avoid injury. Do not place vase or water container on the unit. Water may enter the unit and degrade the insulation. This may cause an electric shock. Do not open window or door for long time during COOL mode operation. Ensure drainage pipe is connected properly and keep drainage outlet clear of gutters, containers or does not immersed in water to prevent water leakage. After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack is not deteriorate to prevent the unit from falling down. REMOTE CONTROL Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. ENGLISH Prevent electric shock by switching off the power supply and unplug when: - Before cleaning or servicing. - Extended non-use. - Abnormally strong lightning activity. To prevent malfunction or damage of the remote control: Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. POWER SUPPLY Do not pull the cord to disconnect the plug to prevent electric shock.

12 ANTI-BACTERIAL FILTER REMOTE CONTROL 5 TO ADJUST AIRFLOW DIRECTION (5 OPTIONS) Maximum distances: 8m AIR SWING In COOL mode, if AUTO is set, the louver swing up/down automatically. In HEAT mode, if AUTO is set, the horizontal louver fix at predetermined position. 6 TO ACHIEVE TEMPERATURE QUICKLY This setting enables the desired set temperature to be reached quickly. INDICATOR Press the remote control s button TO TURN ON OR OFF THE UNIT (GREEN) (ORANGE) (GREEN) (RED) Please be aware of the OFF indication on the remote control display to prevent the unit from starting/stopping improperly. 7 TO ENJOY QUIET ENVIRONMENT This setting provides a quiet environment by reducing the airflow noise. POWERFUL AND QUIET operations can not be activated at the same time. 8 PRESS TO RESTORE THE REMOTE CONTROL S DEFAULT SETTING 9 NOT USED IN NORMAL OPERATIONS TO SET TEMPERATURE Selection range: 6 C ~ 0 C. Operating the unit within the recommended temperature could induce energy saving. HEAT mode : 0 C ~ 4 C. COOL mode : 6 C ~ 8 C. DRY mode : C ~ C lower than room temperature. Remote Control display TO SELECT OPERATION MODE AUTO mode - For your convenience During operation mode selection the power indicator blinks. During Automatic Operation, the operation mode will be selected automatically in accordance with the room temperature and set temperature of remote control. HEAT mode - To enjoy warm air In heat mode, it may take a while for the unit to warm up. The POWER indicator blinks during preheating. COOL mode - To enjoy cool air Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. DRY mode - To dehumidify the environment Unit operates at low fan speed to give a gentle cooling operation. 4 TO SELECT FAN SPEED (5 OPTIONS) FAN SPEED For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.

13 TO SET THE TIMER (-HOUR TIMER SETTING) When you want the air conditioner to turn ON or OFF automatically. DELAY OFF-TIMER For example, to stop the air conditioner 5 hours later. To select the Delay OFF-TIMER, press the button once. Press the button to select the delay hour. The OFF-TIMER can only be set while the airconditioner is in operation. DELAY ON-TIMER For example, to start the air conditioner hours later. To select the Delay ON-TIMER, press the button once. Press the button to select the delay hour. The ON-TIMER can only be set while the airconditioner is not in operation. DELAY OFF AND ON TIMER For example, to stop the air conditioner hours later and start 4 hours later. To select the Delay OFF and ON Timer, press the button twice repeatedly. Press the button to select the delay hour for OFF Timer. Press the button to select the delay hour for ON Timer. This mode of timer can only be set while the airconditioner is in operation. DELAY ON AND OFF TIMER For example, to start the air conditioner 7 hours later and stop 0 hours later. To select the Delay ON and OFF Timer, press the button twice repeatedly. Press the button to select the delay hour for ON Timer. Press the button to select the delay hour for OFF Timer. This mode of timer can only be set while the airconditioner is not in operation. TO CONFIRM THE TIMER SETTING Press the button once to activate the timer operation. TO CANCEL THE TIMER SETTING Press the operation. button again to cancel the timer The timer indicator of the indoor unit will light up during the timer operation. When ON Timer is set, the unit may start earlier before the actual set time in order to achieve the desired temperature on time. If you press operation button during the timer setting operation, timer setting will be cancelled. If timer is cancelled manually or due to power failure, you can restore the timer again by repeating steps above (once power is resumed). ENGLISH

14 INDOOR UNIT CAUTION Switch off the power supply and unplug before cleaning. Do not touch the aluminium fin, sharp parts may cause injury. CLEANING INSTRUCTIONS Do not use benzene, thinner or scouring powder. Use only soap ( ph7) or neutral household detergent. Do not use water hotter than 40 C. HINT To ensure optimal performance of the unit, cleaning maintenance have to be carried out at regular intervals. NOTE If chemical cloth is used to wipe the unit, instruction for the cloth should be followed INDOOR UNIT Wipe the unit gently with a soft, dry cloth. FRONT PANEL Remove Front Panel Raise and pull to remove the front panel. Wash gently and dry. Close Front Panel Press down both ends of the front panel to close it securely. RECEIVER 4 ALUMINIUM FIN 5 HORIZONTAL AIRFLOW DIRECTION LOUVER Manually adjustable. WARNING Be careful not to insert your fingers into the unit to avoid injuring by cross-flow fan. 7 AUTO OFF/ON BUTTON Use when remote control is misplaced or malfunction. Action Press once. Press and hold until beep is heard, then release. Press and hold until you hear double beep sound, then release. Press the button to turn off. Mode Auto Cooling Heating 8 AIR FILTERS Clean the filters regularly. Wash/rinse the filters gently with water to avoid damage to the filter surface. Dry the filters thoroughly under the shade, away from fire or direct sunlight. Replace any damage filter. 9 ANTI - BACTERIAL FILTER Vacuum It is recommended to clean this filter every 6 months. Replace the filter every 0 years or replace any damaged filter. 4 6 VERTICAL AIRFLOW DIRECTION LOUVER Do not adjust by hand.

15 TROUBLESHOOTING The following symptoms do not indicate malfunction. SYMPTOM Mist emerges from indoor unit. Water flowing sound during operation. The room has a peculiar odour. Indoor fan stops occasionally during automatic fan speed setting. Operation is delayed a few minutes after restart. Outdoor unit emits water/steam. The unit operates automatically when power is resumed after a power failure. Indoor fan stops occasionally during heating operation. Power indicator blinks before the unit is switched on. Cracking sound during operation. CAUSE Condensation effect due to cooling process. Refrigerant flow inside the unit. This may due to damp smell emitted by the wall, carpet, furniture or clothing. This helps to remove the surrounding odours. The delay is a protection to the unit s compressor. Condensation or evaporation occurs on pipes. It is the Auto Restart function of the unit. Operation will be restarted automatically under the previous operation mode and air flow direction when power is resumed as the operation is not stopped by remote control. To avoid unintended cooling effect. This is a preliminary step in preparation for the operation when the ON timer has been set. Changes of temperature cause the expansion/ contraction of the unit. ENGLISH Check the following before calling for servicing. SYMPTOM Heating/Cooling operation is not working efficiently. Noisy during operation. Remote control does not work. (Display is dim or transmission signal is weak.) The unit does not work. The unit does not receive the signal from the remote control. CHECK Set the temperature correctly. Close all doors and windows. Clean or replace the filters. Clear any obstruction at the air inlet and air outlet vents. Check if the unit has been installed at an incline. Close the front panel properly. Insert the batteries correctly. Replace weak batteries. Check if the circuit breaker is tripped. Check if timers have been set. Make sure the receiver not obstructed. Certain fluorescent lights may interfere with signal transmitter. Please consult authorized dealer. The unit stops and the timer indicator blinks. Use remote control to retrieve error code. / Press until you hear beep sound, then jot down the error code. QUIET POWERFUL Press for 5 seconds. A SELECT B SET/CANCEL Press for 5 seconds to quit checking. 4 Turn the unit off and reveal the error code to authorized dealer. 5

16 信息 /INFORMATION 長期不使用時的換季檢查 檢查遙控器的電池 確保室內機或室外機的空氣吸入口及吹出口順暢無阻 使用自動運轉關 / 開鍵選擇製冷 / 製暖模式, 開始運轉 5 分鐘後, 在正常情況下, 室內機空氣吸入及吹出口的溫差為:製冷 : 8 製暖 : 4 長期不使用時 在製暖狀態下運轉 ~ 小時以徹底除去空調內部件水分, 避免黴菌滋生 切斷電源並拔除電源插頭 取出遙控器的電池 不可維修的情況若出現以下情況, 請切斷電源並拔除插頭, 然後聯系授權經銷商 : 運轉時發出異常噪音 有水 / 異物進入遙控器 室內機漏水 電源斷路器頻繁跳閘 電線異常發熱 開關鈕或按鈕不能正常操作 室內機指示燈閃爍並且空調不運轉 FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE Checking of remote control batteries. No obstruction at air inlet and air outlet vents. Use Auto OFF/ON button to select Cooling/Heating operation, after 5 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: 8 C Heating: 4 C FOR EXTENDED NON-USE Activate Heat mode for ~ hours as an alternative to remove moisture left in the internal parts thoroughly to prevent mould growth. Turn off the power supply and unplug. Remove the remote control batteries. NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY and unplug then please consult authorized dealer under the following conditions: Abnormal noise during operation. Water/foreign particles have entered the remote control. Water leaks from Indoor unit. Circuit breaker switches off frequently. Power cord becomes unnaturally warm. Switches or buttons are not functioning properly. The timer indicator blinks and the unit can not be operated. 6

17 關於用戶回收與丟棄舊設備及電池的信息 [ 非歐共體國家的處理信息 ] 這些符號僅有效於歐洲共同體 如果您要丟棄這些物件, 請諮詢您的當地政府或經銷商並詢問正確的丟棄方式 電池符號的注意事項 ( 底部兩個符號舉例 ): 此符號可與化學符號綜合使用 在此情況下, 它須符合制定給該化學的使用條件 Pb Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Pb Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. 7

18 產品規格 /PRODUCT SPECIFICATION Indoor Unit Outdoor Unit Model CS-RE9NKA CU-RE9NKA CS-RENKA CU-RENKA COOL HEAT COOL HEAT Single, 0V,50Hz Single, 0V,50Hz Power/Current [kw] [A] Refrigerant [kg] R40A R40A Cooling Capacity [kw] Heating Capacity [kw] JIS C 96 [<70 db(a)] Noise Level Conditions m Distance Max. cooling/ heating operation [db(a)] Sound power level [db(a)] Air Circulation [m /min.] kg Product Weight [kg] Dimensions (H x W x D) [mm] 90 x 848 x 90 x 848 x 50 x 70 x x 780 x 89. Standard piping length: 5 m (Includes Indoor Unit piping length).. Air filters are attached. 8

19 9

20 簡易指南 /QUICK GUIDE 遙控器的準備 Remote Control Preparation 打開電池蓋 Remove the battery cover 裝入 AAA 或 R0 電池 ( 可使用大約一年時間 ) Insert AAA or R0 batteries (can be used ~ year) 關上後蓋 Close the cover OFF/ON 開始 / 停止操作 Start/stop the operation. MODE AUTO HEAT DRY COOL 選擇所需要的模式 Select the desired mode. TEMP 設定所需要的溫度 Select the desired temperature. Printed in China Panasonic Corporation Website: F56859 F-00