HEAT PUMP Heat pump air conditioner. Thanks to this feature you can replace traditional heating in intermediate seasons or support it.

Transcription

1 UNIO inverter The first air-conditioner without outdoor unit with inverter technology. UNIO INVERTER 9 SF od UNIO INVERTER 9 HP od UNIO INVERTER 12 SF od UNIO INVERTER 12 HP od Two capacity versions: 2.3 kw 2.7 kw vailable in versions: SF (ooling only) - HP (Heat Pump) Double class Refrigerant gas R410* Large flap for homogeneous air diffusion in the room Design by King e Miranda Economy mode: allows energy saving by automatically optimizing the machine s performance INVERTER SYSTEM Thanks to inverter technology, Unico saves up to 30% of energy as compared with motors with traditional technology. 100% 80% Heat pump air conditioner. Thanks to this feature you can replace traditional heating in intermediate seasons or support it. electrostatic filter(which eliminates small 70% NON INVERTER INVERTER D INVERTER SVINGS 30% UNIO INVERTER Weight kg mm

2 Indoor mbient Outdoor mbient UNIO INVERTER 9 SF UNIO INVERTER 12 SF UNIO INVERTER 9 HP UNIO INVERTER 12 HP Product code Nominal cooling capacity (1) P rated kw 2,3 2,7 2,3 2,7 ooling power (min/max) (1) kw 1,4 / 2,7 1,8 / 3,1 1,4 / 2,7 1,8 / 3,1 Nominal heating capacity (1) P rated kw - - 2,4 2,7 Heating power (min/max) (1) kw - - 1,4 / 2,7 1,8 / 3,0 Nominal power consumption for cooling (1) PEER kw 0,9 1,0 0,9 1,0 Power consumption for cooling (min/max) (1) kw 0,46 / 1,30 0,58 / 1,40 0,46 / 1,30 0,58 / 1,40 Nominal absorption for cooling (1) 3,9 4,6 3,9 4,6 bsorption for cooling (min/max) (1) 2,1 / 5,8 2,7 / 6,4 2,1 / 5,8 2,7 / 6,4 Nominal power consumption for heating (1) POP kw - - 0,8 0,8 Power consumption for heating (min/max) (1) kw - - 0,42 / 1,20 0,53 / 1,30 Nominal absorption for heating (1) - - 3,4 3,8 bsorption for heating (min/max) (1) - - 1,9 / 5,3 2,4 / 5,9 Nominal energy efficiency index (1) EERd 2,7 2,7 2,7 2,7 Nominal efficiency coefficient (1) OPd - - 3,2 3,2 Energy efficiency class in cooling (1) Energy efficiency class in heating (1) - - Energy consumption in thermostat off mode PTO 12,0 12,0 12,0 12,0 Energy consumption in standby mode (EN 62301) PS 0,5 0,5 0,5 0,5 Energy consumption for double pipe appliances (1) cooling QDD kwh/h 0,9 1,0 0,9 1,0 Energy consumption for double pipe appliances (1) heating QDD kwh/h - - 0,8 0,8 Supply voltage V-F-Hz Supply voltage minimum/maximum V 198 / / / / 264 Maximum power consumption in cooling mode (1) W Maximum absorption in cooling mode (1) 5,8 6,4 5,8 6,4 Maximum power consumption in heating mode (1) W Maximum absorption in heating mode (1) - - 5,3 5,8 Maximum power consumption with electric resistance heating W Maximum absorption with electric resistance heating Dehumidification capacity l/h 1,0 1,1 1,0 1,1 ir flow rate in cooling environment (max/med/min) m³/h 490 / 430 / / 430 / / 430 / / 430 / 360 ir flow rate in heating environment (max/med/min) m³/h / 430 / / 430 / 360 ir flow rate with electric resistance heating environment m³/h External air flow rate in cooling (max/min) m³/h 520/ / / /340 External air flow rate in heating (max/min) m³/h / / 340 Internal ventilation speed External ventilation speed Diameter wall holes mm 202* 202* 202* 202* Electric resistance heating Maximum range remote control (distance / angle) m / 8 / ±80 8 / ±80 8 / ±80 8 / ±80 Dimensions (Larg. x lt. x Prof.) (without packaging) mm 902 x 506 x x 506 x x 506 x x 506 x 229 Dimensions (Larg. x lt. x Prof.) (with packaging) mm 980 x 610 x x 610 x x 610 x x 610 x 350 Weight (without packaging) Kg Weight (with packaging) Kg Internal sound pressure (Min Max) (2) d() Internal sound power level (EN 12102) LW d() Degree of protection provided by covers IP 20 IP 20 IP 20 IP 20 Refrigerant gas* Type R410 R410 R410 R410 Global warming potential GWP kgo2 eq Refrigerant gas charge kg 0,57 0,57 0,57 0,58 Maximum operating pressure MPa 3,6 3,6 3,6 3,6 Power cable (N pole x section mm 2 ) 3 x 1,5 3 x 1,5 3 x 1,5 3 x 1,5 LIMITS OF OPERTING ONDITIONS Maximum temperature in cooling D 35 - W 24 Minimum temperature in cooling D 18 Maximum temperature in heating D 27 - Maximum temperature in cooling D 43 - W 32 Minimum temperature in cooling D -10 Maximum temperature in heating D 24 - W 18 D -15 (1) TEST ONDITIONS: data refers to regulation EN14511 (2): Data test declaration in semianechoic room at a distance of 2m, minimum sound pressure with ventilation only. - y maintaining the same center to center distance of inlet and outlet holes and the possibility of installation with 162 mm diameter holes, models in the Unico Smart, Unico Inverter and Unico ct range may easily substitute previously installed Unico Star and Unico Sky models. * hermetically sealed equipment containing fluorinated gas with GWP equivalent 2088 S SiOS SYSTEM TERMINL UNITS UNIO FIXED IR ONDITIONER PORTLE IR ONDITIONER IR OOLER VM DEHUMIDIFIERS HUMIDIFIERS FN HETERS ERMI FN HETERS GS STOVES PERSONL OMFORT 123 PELLET STOVES

3 UNIO inverter 13 + hp UNIO INVERTER 13 + HP od apacity: 2.8 kw vailable in versions: HP (Heat Pump) lass Refrigerant gas R410* High efficency E inverter fan Large flap for homogeneous air diffusion in the room Design by King e Miranda Economy mode: allows energy saving by automatically optimizing the machine s performance DUL INVERTER MODE (D.I.M.) The DIM technological heart is located in an innovative control algorithm to optimize the efficiency when the unit works at 70% of its ambient thermal demand The algorithm allows to satisfy the real thermal demand on the 70% of the total working hours with a reduced consumption of 25% of our traditional UNIO INVERTER.** THERML LOD (kw) ooling Nominal capacity hours ooling consumption 0,6 Kw minus 25% compare to traditional OS Inverter electrostatic filter(which eliminates small Heat pump air conditioner. Thanks to this feature you can replace traditional heating in intermediate seasons or support it. hours DY TIME hours UNIO INVERTER 13 + HP Weight kg mm ** Internal laboratory tests on traditional Olimpia Splendid range 124

4 Indoor mbient Outdoor mbient UNIO INVERTER 13 + HP Product code Nominal cooling capacity (1) P rated kw 2,8 ooling power (min/max) (1) kw 1,8 / 3,1 Nominal heating capacity (1) P rated kw 2,7 Heating power (min/max) (1) kw 1,8 / 3,0 Nominal power consumption for cooling (1) PEER kw 0,6 Power consumption for cooling (min/max) (1) kw 0,58 / 1,40 Nominal absorption for cooling (1) 2,8 bsorption for cooling (min/max) (1) 2,4 / 6,1 Nominal power consumption for heating (1) POP kw 0,8 Power consumption for heating (min/max) (1) kw 0,53 / 1,30 Nominal absorption for heating (1) 3,8 bsorption for heating (min/max) (1) 2,4 / 5,9 Nominal energy efficiency index (1) EERd 3,1 Nominal efficiency coefficient (1) OPd 3,2 Energy efficiency class in cooling (1) Energy efficiency class in heating (1) Nominal Design apacity Prated kw 2,0 Energy consumption in thermostat off mode PTO 12 Energy consumption in standby mode (EN 62301) PS 0,5 Energy consumption for double pipe appliances (1) cooling QDD kwh/h 0,9 Energy consumption for double pipe appliances (1) heating QDD kwh/h 0,8 Supply voltage V-F-Hz Supply voltage minimum/maximum V 198 / 264 Maximum power consumption in cooling mode (1) W 1400 Maximum absorption in cooling mode (1) 6,4 Maximum power consumption in heating mode (1) W 1300 Maximum absorption in heating mode (1) 5,8 Maximum power consumption with electric resistance heating W - Maximum absorption with electric resistance heating - Dehumidification capacity l/h 1,1 ir flow rate in cooling environment (max/med/min) m³/h 490 / 430 / 360 ir flow rate in heating environment (max/med/min) m³/h 490 / 430 / 360 ir flow rate with electric resistance heating environment m³/h - External air flow rate in cooling (max/min) m³/h 500/340 External air flow rate in heating (max/min) m³/h 500/340 Internal ventilation speed 3 External ventilation speed 1 Diameter wall holes mm 202 Electric resistance heating - Maximum range remote control (distance / angle) m / 8 / ±80 Dimensions (Larg. x lt. x Prof.) (without packaging) mm 902 x 506 x 229 Dimensions (Larg. x lt. x Prof.) (with packaging) mm 980 x 610 x 350 Weight (without packaging) Kg 39 Weight (with packaging) Kg 42 Internal sound pressure (Min Max) (2) d() Internal sound power level (EN 12102) LW d() 58 Degree of protection provided by covers IP 20 Refrigerant gas* Type R410 Global warming potential GWP kgo2 eq Refrigerant gas charge kg 0,50 Maximum operating pressure MPa 3,6 Power cable (N pole x section mm 2 ) 3 x 1,5 LIMITS OF OPERTING ONDITIONS Maximum temperature in cooling D 35 - W 24 Minimum temperature in cooling D 18 Maximum temperature in heating D 27 - Maximum temperature in cooling D 43 - W 32 Minimum temperature in cooling D -10 Maximum temperature in heating D 24 - W 18 D -15 (1) TEST ONDITIONS: data refers to regulation EN14511 (2): Data test declaration in semianechoic room at a distance of 2m, minimum sound pressure with ventilation only. - y maintaining the same center to center distance of inlet and outlet holes and the possibility of installation with 162 mm diameter holes, models in the Unico Smart, Unico Inverter and Unico ct range may easily substitute previously installed Unico Star and Unico Sky models. * hermetically sealed equipment containing fluorinated gas with GWP equivalent 2088 S SiOS SYSTEM TERMINL UNITS UNIO FIXED IR ONDITIONER PORTLE IR ONDITIONER IR OOLER VM DEHUMIDIFIERS HUMIDIFIERS FN HETERS ERMI FN HETERS GS STOVES PERSONL OMFORT 125 PELLET STOVES

5 UNIO SMRT Up to 2,7 kw capacity. Designed for the air-conditioning of large spaces. UNIO SMRT 10 SF od UNIO SMRT 10 HP od UNIO SMRT 12 SF od UNIO SMRT 12 HP od Two capacity versions: 2,3 kw - 2,7 kw vailable in versions: SF (ooling only) - HP (Heat Pump) Double class Refrigerant gas R410* Design by King e Miranda Heat pump air conditioner. Thanks to this feature you can replace traditional heating in intermediate seasons or support it. (only in HP version) electrostatic filter(which eliminates small SUPER OLD In version number 12 Unico Smart s cooling capacity can reach up to 2.7 kw. UNIO SMRT Weight kg mm

6 Indoor mbient Outdoor mbient UNIO SMRT 10 SF UNIO SMRT 10 HP UNIO SMRT 12 SF UNIO SMRT 12 HP Product code Nominal cooling capacity (1) P rated kw 2,3 2,3 2,7 2,7 ooling power (min/max) (1) kw Nominal heating capacity (1) P rated kw - 2,3-2,5 Heating power (min/max) (1) kw Nominal power consumption for cooling (1) PEER kw 0,9 0,9 1,0 1,0 Power consumption for cooling (min/max) (1) kw Nominal absorption for cooling (1) 3,7 3,7 4,3 4,3 bsorption for cooling (min/max) (1) Nominal power consumption for heating (1) POP kw - 0,7-0,8 Power consumption for heating (min/max) (1) kw Nominal absorption for heating (1) - 3,0-3,3 bsorption for heating (min/max) (1) Nominal energy efficiency index (1) EERd 2,6 2,6 2,6 2,6 Nominal efficiency coefficient (1) OPd - 3,1-3,1 Energy efficiency class in cooling (1) Energy efficiency class in heating (1) - - Energy consumption in thermostat off mode PTO 14,0 14,0 14,0 14,0 Energy consumption in standby mode (EN 62301) PS 0,5 0,5 0,5 0,5 Energy consumption for double pipe appliances (1) cooling QDD kwh/h 0,9 0,9 1,0 1,0 Energy consumption for double pipe appliances (1) heating QDD kwh/h - 0,7-0,80 Supply voltage V-F-Hz Supply voltage minimum/maximum V 198 / / / / 264 Maximum power consumption in cooling mode (1) W 0,9 0,9 1,1 1,1 Maximum absorption in cooling mode (1) 3,8 3,9 4,8 4,8 Maximum power consumption in heating mode (1) W - 0,9-1,1 Maximum absorption in heating mode (1) - 3,8-4,7 Maximum power consumption with electric resistance heating W Maximum absorption with electric resistance heating Dehumidification capacity l/h 0,9 1,1 0,9 1,1 ir flow rate in cooling environment (max/med/min) m³/h 490 / 430 / / 430 / / 430 / / 430 / 360 ir flow rate in heating environment (max/med/min) m³/h / 350 / / 400 / 330 ir flow rate with electric resistance heating environment m³/h External air flow rate in cooling (max/min) m³/h 520 / / / / 340 External air flow rate in heating (max/min) m³/h / / 340 Internal ventilation speed External ventilation speed Diameter wall holes mm 162 / / / / 202 Electric resistance heating Maximum range remote control (distance / angle) m / 8 / ±80 8 / ±80 8 / ±80 8 / ±80 Dimensions (Larg. x lt. x Prof.) (without packaging) mm 902 x 516 x x 516 x x 516 x x 516 x 229 Dimensions (Larg. x lt. x Prof.) (with packaging) mm 980 x 610 x x 610 x x 610 x x 610 x 350 Weight (without packaging) Kg Weight (with packaging) Kg Internal sound pressure (Min Max) (2) d() Internal sound power level (EN 12102) LW d() Degree of protection provided by covers IP 20 IP 20 IP 20 IP 20 Refrigerant gas* Type R410 R410 R410 R410 Global warming potential GWP kgo2 eq Refrigerant gas charge kg 0,48 0,54 0,65 0,55 Maximum operating pressure MPa 3,6 3,6 3,6 3,6 Power cable (N pole x section mm 2 ) 3 x 1,5 3 x 1,5 3 x 1,5 3 x 1,5 LIMITS OF OPERTING ONDITIONS Maximum temperature in cooling D 35 - W 24 Minimum temperature in cooling D 18 Maximum temperature in heating D 27 - Maximum temperature in cooling D 43 - W 32 Minimum temperature in cooling D -10 Maximum temperature in heating D 24 - W 18 D -15 (1) TEST ONDITIONS: data refers to regulation EN14511 (2): Data test declaration in semianechoic room at a distance of 2m, minimum sound pressure with ventilation only. - y maintaining the same center to center distance of inlet and outlet holes and the possibility of installation with 162 mm diameter holes, models in the Unico Smart, Unico Inverter and Unico ct range may easily substitute previously installed Unico Star and Unico Sky models. * hermetically sealed equipment containing fluorinated gas with GWP equivalent 2088 S SiOS SYSTEM TERMINL UNITS UNIO FIXED IR ONDITIONER PORTLE IR ONDITIONER IR OOLER VM DEHUMIDIFIERS HUMIDIFIERS FN HETERS ERMI FN HETERS GS STOVES PERSONL OMFORT 127 PELLET STOVES

7 UNIO R Designed for the coldest climates. UNIO 10 HP od UNIO 12 HP od Two capacity versions: 2,3 kw - 2,7 kw vailable in versions: HP (Heat Pump) Double class Refrigerant gas R410 * +2 KW KUP UXILIRY Suitable even for the coldest temperatures. When external ambient temperatures are below 2, only the fan and the electric heaters are activated for the heating mode. For temperatures over 2, heating is obtained by means of the heat pump. The management of either mode is completely automatic. electrostatic filter (which eliminates small UNIO R Weight kg mm