Bringing a year round comfort solutions to extreme climates

Transcription

1 ooling or Heating ZUBDN series PUHYHP YHM(BS) PUHYHP YSHM(BS) Bringing a year round comfort solutions to extreme climates ITY MULTI ZUBDN series combines the ultimate in application flexibility and powerful cooling and heating capabilities to deliver precise comfort even in the coldest days of the year down to 25. The technology behind this is a Flash Injection circuit which provides optimum amount of refrigerant to the system via a compressor through a specially designed injection port to ensure a particularly stable operation. With this, ZUBDN can provide a full heating performance even at 15 and continuous heating for up to 250 minutes in one continuous cycle, ensuring a phenomenal heating performance at low temperatures. Installation image Joint Header System Pipe Lengths [810HP] Refrigerant Piping Lengths Total length Maximum allowable length Farthest indoor from first branch Vertical differentials between units /outdoor (outdoor higher) /outdoor (outdoor lower) /indoor Maximum meters [Feet] 300 [984] 150 (175equivalent) [492 (574)] 40 [131] Maximum meters [Feet] 50 [164] 40 [131] 15 [49] Topbottom differential 50m [164ft] *1 unit Furthest piping length 175m [574ft] (equivalent length) (actual length 150m [492ft]) Between indoor units topbottom differential 15m [49ft] *1 When the outdoor unit is installed below the indoor unit, topbottom differential is 40m [131 ft]. Page 28

2 Stable Heating Performance even at 15 Full heating capacity even at 15 apacity improvement by about 30% () PUHYHP400 YSHM Standard ITY MULTI PUHYP400 YSJM PUHYHP250 YHM Standard ITY MULTI PUHYP250 YJM Outdoor temp. (W.B.) Using an industry first Flashinjection ircuit, the ZUBDN System is able to provide FULL heating performance in ambient temperatures as low as 15. Expanded Heating Operation down to 25 onventional ITY MULTI PUHYP YJM 20 Outdoor temperature Expanded to 25 Hyper ZUBDN Heating Inverter System System 25 Outdoor temperature furthermore, from a previous LOWEST operating ambient temperature of 20, the ZUBDN System pushes the boundaries of technology to give heating in ambient temperatures as low as Outdoor temp. (W.B.) 25 With ZUBDN System Previously, heating performance drops off when the temperature falls below 20! however, even at such temperatures, the new ZUBDN System has no trouble keeping the occupants nice and toasty! Page 29

3 High Static Pressure Setting High Static Pressure Setting up to 60Pa is available. With our new ZUBDN model, high static pressure setting up to 60Pa is available by setting the dip switch (0Pa at factory setting) making it ideal and flexible for any type of application. Shorter Warmup in about 20 Min. With its new improved startup performance, the ZUBDN system achieves full heating capacity even when outdoor temperature is as low as 15. Heating capacity, about 20 minutes after startup is improved by 40% compared to the conventional model; ensuring occupants an immediate comfortable air solution. () ZUBDN System Even at 15,it reaches the rated heating capacity in about 20minutes Stability apacity improvement by about 40% onventional ITY MULTI PUHYP YJM HP when the outdoor Time (minutes) temperature is 15 Heating capacity Reliable and Long Product Life ycle Backup Function (HP400 and HP500 models) ZUBDN system ensures an exceptionally high level of reliability by utilizing a new backup function, which can be easily operated in the case of a malfunction from an indoor unit remote controller. Backup operation Rotation Function (HP400 and HP500 models) Running outdoor units alternatively using its newly developed Rotation Function, the system is able to ensure an optimum product life cycle for both of its component units. lternate operation Page 30

4 Maximum Stable Operation By utilizing our advanced Flash Injection ircuit, the system can not only provide continuous heating for up to 250 minutes in one continuous cycle, but also significantly lessens defrost time to give an exceptionally stable heating operation. Heating up to 250 min. straight Reduced Defrosting time Startup omfort One of the key factors of the units newly designed Flash Injection ircuit is that the optimal amount of refrigerant can be provided to the system via the compressor through a specially designed injection port to ensure a particularly stable operation. In simple terms, the system allows a quick startup time and continuous heating; even in low ambient conditions. Flash Injection ircuit unit G F J B ompressor HI I H E' LEV 2 LEV 1 E D (confluence) ccumulator LEV Note: Heat Interchange ircuit (HI) Heating efficiency is improved by enhancing the recollection of heat at the outdoor unit with the low temperature refrigerant from the HI. Refrigerant is bypassed from injection port to the compressor onstant omfort With its new highly effective defrost feature (which prevents automatic defrosting when it is not required), the ZUBDN System can deliver conditioned heating operation up to 250 minutes in one continuous cycle! Heating capacity is maintained by the Flashinjection circuit. Heating efficiency improved by HI D F Discharged Pressure LEV E D Middle pressure E' F LEV 1 J Injection pressure I G LEV 2 H Suction pressure B Discharged pressure is maintained at high level. Secures sufficient refrigerant by Flashinjection circuit. [Pressure Enthalpy diagram showing HI] Page 31

5 OUTDOOR UNIT ZUBDN (Heat Pump) Series(Y) PUHYHP Y(S)HM(BS) Specifications Set name Power source ooling capacity (Nominal) Temp. range of cooling Heating capacity (Nominal) Temp. range of heating unit connectable Sound pressure level (measured in anechoic room) Diameter of Liquid pipe refrigerant pipe Gas pipe Model External finish External dimension H x W x D Net weight kg(lbs) Heat exchanger Type ompressor Starting method Motor output *3 m 3 /min ir flow rate L/s cfm FN Type x Quantity Motor output Protection devices Refrigerant Pipe between unit distributor Optional parts Power input urrent input EER Outdoor Power input urrent input OP Outdoor *1 *1 *2 *2 Total capacity Model/Quantity External static press. High pressure protection Inverter circuit (OMP./FN) ompressor Type x Original charge Liquid pipe Gas pipe BTU/h / W.B. D.B. BTU/h / D.B. W.B. db<> mm in. PUHYHP200YHM(BS) , , P15~P250 / 1~17 56 ø12.7 (ø1/2) Brazed ø19.05 (ø3/4) Brazed Precoated galvanized steel sheets <MUNSELL 5Y 8/1 or similar> 1,710 (without legs 1,650) 673/8 (without legs 65) x 361/4 x 2915/ (486) Saltresistant cross fin & copper tube Inverter scroll hermetic compressor Inverter PUHYHP250YHM(BS) PUHYHP400YSHM(BS) 3phase 4wire V 50/60Hz , , ~ 24 (59 ~ 75 F) 5 ~ 43 (23 ~ 109 F) , ~ 27 (59 ~ 81 F) 25 ~ 15.5 (13 ~ 60 F) , PUHYHP500YSHM(BS) , , ~ 130% of outdoor unit capacity P15 ~ P250 / 1 ~ 21 P15 ~ P250 / 1 ~ 34 P15 ~ P250 / 1 ~ ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed ø15.88 (ø5/8) Brazed ø22.2 (ø7/8) Brazed ø28.58 (ø11/8) Brazed ø28.58 (ø11/8) Brazed PUHYHP200YHM(BS) PUHYHP200YHM(BS) PUHYHP250YHM(BS) PUHYHP250YHM(BS) Precoated galvanized steel sheets <MUNSELL 5Y 8/1 or similar> 1,710 (without legs 1,650) 1,710 (without legs 1,650) 1,710 (without legs 1,650) 1,710 (without legs 1,650) 1,710 (without legs 1,650) 673/8 (without legs 65) x 361/4 x 2915/ (486) High pressure sensor, High pressure switch at 4.15 MPa (601 psi) Overheat protection, Overcurrent protection Overheat protection R410 x 9.0kg (20 lbs) R410 x 9.0kg (20 lbs) Joint : MYY102SSG2 Header : MYY104/108/1010G 673/8 (without legs 65) 673/8 (without legs 65) 673/8 (without legs 65) 673/8 (without legs 65) x 361/4 x 2915/16 x 361/4 x 2915/16 x 361/4 x 2915/16 x 361/4 x 2915/ (486) 220 (486) 220 (486) 220 (486) Saltresistant cross fin & copper tube Inverter scroll hermetic compressor Inverter High pressure sensor, High pressure switch at 4.15 MPa (601 psi) Overheat protection, Overcurrent protection Overheat protection R410 x 9.0kg (20 lbs) R410 x 9.0kg (20 lbs) R410 x 9.0kg (20 lbs) R410 x 9.0kg (20 lbs) ø9.52 (ø3/8) Brazed ø9.52 (ø3/8) Brazed ø9.52 (ø3/8) Brazed ø9.52 (ø3/8) Brazed ø19.05 (ø3/4) Brazed ø19.05 (ø3/4) Brazed ø22.2 (ø7/8) Brazed ø22.2 (ø7/8) Brazed Outdoor Twinning kit : MYY100VBK2 Joint : MYY102SS/LSG2, MYY202SG2 Header : MYY104/108/1010G Notes: *1,*2 Nominal conditions Outdoor Pipe length Level difference ooling 27º DB/19º WB (81ºF DB/66ºF WB) 35º DB(95ºF DB) 7.5m (249/16ft.) 0m (0ft.) Heating 20º DB(68ºF DB) 7º DB/6º WB(45ºF DB/43ºF WB) 7.5m (249/16ft.) 0m (0ft.) *3 External static pressure option is available (30Pa, 60Pa / 3.1mmH2O, 6.1mmH2. *Nominal condition *1,*2 are subject to JIS B *Due to continuing improvement, above speci cation may be subject to change without notice. Outdoor Unit Page 64