Innovative, Compact Design

Transcription

1 Innovative, Compact Design Easy, Effective Compliance

2 What in the world is? The Thermaco, Inc. Trapzilla Supercapacity Grease Trap collects free-floating (non-emulsifed) grease & oils contained in kitchen drain water flows. As most food service facility managers already know, grease buildup inside a building s grease containment system is a major cause of problems due to exterior drain line blockages. These problems jeopardize normal operations as well as create health and safety hazards within the facility itself. The proper installation of a Trapzilla Supercapacity Grease Trap can reduce or eliminate these grease problems. Use of a Trapzilla system assures minimization and/or elimination of costly sewer surcharges and fines through efficient separation and retention of free-floating grease & oils. Why does Trapzilla offer a better solution? The unique design of the Trapzilla provides advantages that a traditional, in-ground grease trap doesn t have. The Trapzilla offers patented flat separation curve technology. Traditional grease interceptors frequently suffer separation efficiency losses when the grease layer exceeds 25% of the internal liquid depth volume. This is why these older grease interceptors have very large footprints - to provide an adequate operating service period before reaching 25% full. The unique design of the Trapzilla maintains peak separation efficiency well past the 25% full threshold, allowing it to store large quantities of grease in a small footprint. 2 Thermaco, Inc Copyright 2011 Thermaco, Inc

3 The offers patented flat separation curve technology What is thermal inversion? The Trapzilla also has a horizontal baffle that prevents thermal inversion. What is thermal inversion? When warmer effluent enters the grease trap, the trapped cold water layer under the retained grease layer suddenly falls downward as rapidly rising hotter water rises to take the place of the cold water. As the cold water layer falls, it also pulls the underside of the overhead grease layer down along with it into the rapidly moving water flow along the bottom of the separator. Thermal inversion is why traditional grease separators have large internal volumes. As the grease layer approaches 25% of the internal volume depth in traditional grease traps, thermal inversion effect losses may occur. In layman s terms, the traditional grease trap becomes a gigantic lava lamp. The Trapzilla s patented/patent pending thermal inversion control design retains high-separation efficiency and high grease capacity within a small footprint ideal for space constrained food service establishments. Other Advantages? The compact design of the Trapzilla allows for installation into most facilities. Options are available enabling a Trapzilla unit to be installed on the floor, suspended from the ceiling or in-ground outside the facility. Trapzilla units are designed to treat high flows of kitchen drain water with large grease storage capacity within a small footprint unit. These units are lightweight and compact, which means that they can be maneuvered into position with minimum labor. Plumbing the unit is also a simple matter. The Trapzilla Model TZ-160 handles a 35 GPM flow and stores 160+ lbs. of grease, the Model TZ-400 handles a 75 GPM kitchen flow and stores 400+ lbs. of grease while the Model TZ-600 handles a 150 GPM kitchen flow and stores 600+ lbs. of grease. TZ-400 Efficiency ASME A Thermaco, Inc Copyright 2011 Thermaco, Inc. 3

4 Cutaway Drawing of TZ showing operating principles Removable Cover Access Plugs allow Solids and Grease extraction Optional Collar(s) allow depth adjustment to drainage piping Vent Connection Grease rises to top of inner storage tank Inlet Outlet Drain water from source enters through Inlet Baffle Solids extraction tube Clean water exits through Outlet Baffle Anchor Ring for In-Ground Installation (bury in concrete) Solids fall to bottom of tank Greasy effluent from the kitchen laminarly flows around the vertical baffle and becomes trapped in the grease storage area. The cleaned effluent flows through the outlet. The trapped grease remains segregated from the flows by means of the horizontal baffle, thus maintaining a flat separation curve. Pumping the Trapzilla is easy - the pumper unscrews the Grease and Solids plugs and vacuums out the grease and solids. 4 Thermaco, Inc Copyright 2011 Thermaco, Inc

5 can be used in a variety of configurations Light weight and compact design enables Trapzilla to be installed in places where standard grease traps would not fit or could not be accommodated. Trapzilla Options allow a variety of space saving, code friendly, creative installations. A TZ-400 with an SSOP-400/600 Support Stand installed in a basement. SSOP-400/600 Support Stand Used to support the Trapzilla Unit when installed directly on the floor of a basement or mechanical room. A TZ-600 buried in concrete outside. ECA-400/600 Extension Collar Used with in-ground and in-floor installations. Aids in lining up facility drainage piping when located deep in the ground. Trim markings at 1 intervals to make field height adjustment easy. A TZ-600 with an HA-400/600 Hanger Assembly and a PACP-400/600 Cover Plate installed between floors. HA-400/600 Hanger Assembly Used to support the Trapzilla Unit when installed between floors. PACP-400/600 Cover Plate Provides a non-slip cover when the Trapzilla unit is installed directly in the floor or locations where the cover may be in foot-traffic areas. Fabricated of durable aluminum with a diamond plate surface. MFSH-44 Flow Splitter Used when plumbing twin Trapzilla Units in parallel. Splits and diverts kitchen flow into two separate, equal flows when two (2) Trapzilla Units are necessary. Four (4) Trapzilla Units can be plumbed using three (3) flow splitters. Thermaco, Inc Copyright 2011 Thermaco, Inc. 5

6 Trapzilla can be hung in the interstitial space of the building. 6 Thermaco, Inc Copyright 2011 Thermaco, Inc

7 Trapzilla may also be installed below ground with field modifiable extension collars. Trapzilla can be installed on the floor in a basement or mechanical room. Optional Configurations can provide greater flexibility of installation. Thermaco, Inc Copyright 2011 Thermaco, Inc. 7

8 TZ-160 Specifications TZ GPM (2.21 l/s) Construction: Rotationally Molded Polyethylene Grease Retention Capacity: 160+ lbs. (72+ Kg) 3 Inlet/Outlet (75 mm) FEATURES Constructed of corrosion-resistant, linear low-density polyethylene suitable for installation in virtually any location Supercapacity Compact footprint High Separation Efficiency 18 CLEARANCE FROM TOP OF TANK REQUIRED FOR LID REMOVAL 2 VENT Conforms to ASME Standard ASME A In order to provide the best products possible, specifications are subject to change US & International Patents/Patents Pending 8 Thermaco, Inc Copyright 2011 Thermaco, Inc

9 4.5" TZ-400 Specifications 37" GREASE U.S. and International Patents Issued and Pending SOLIDS DO NOT USE MECHANICAL CRUST BREAKING DEVICES GREASE TZ GPM (4.73 l/s) Construction: Rotationally Molded Polyethylene Grease Retention Capacity: 400+ lbs. (181+ Kg) 4 Inlet/Outlet (100 mm) FEATURES Constructed of corrosion-resistant, linear low-density polyethylene suitable for installation in virtually any location Supercapacity Compact footprint High Separation Efficiency TOP VIEW AA 4.5" 36" 18.5 CLEARANCE FROM TOP OF TANK REQUIRED FOR LID REMOVAL 2 VENT OUTLET INLET 38.5" 4" PIPE INLET/OUTLET 28.5" 29" SIDE VIEW " END VIEW 31" Conforms to ASME Standard ASME A In order to provide the best products possible, specifications are subject to change US & International Patents/Patents Pending Thermaco, Inc Copyright 2011 Thermaco, Inc. 9

10 4.5" TZ-600 Specifications U.S. and International Patents Issued and Pending TZ GPM (9.46 l/s) ASME A (Tested) Flow Rating: 75 GPM Manufacturer Rated Inlet Flow Rating: 150 GPM Construction: Rotationally Molded Polyethylene Grease Retention Capacity: 600+ lbs. (272+ Kg) 4 Inlet/Outlet (100 mm) 37" TOP VIEW GREASE SOLIDS DO NOT USE MECHANICAL CRUST BREAKING DEVICES AA GREASE FEATURES Constructed of corrosion-resistant, linear low-density polyethylene suitable for installation in virtually any location Supercapacity Compact footprint High Separation Efficiency 4.5" 36" 29 CLEARANCE FROM TOP OF TANK REQUIRED FOR LID REMOVAL 2" VENT OUTLET INLET 4" PIPE INLET/OUTLET 49.5" 36.5" 37" SIDE VIEW " END VIEW 31" Conforms to ASME Standard ASME A In order to provide the best products possible, specifications are subject to change US & International Patents/Patents Pending 10 Thermaco, Inc Copyright 2011 Thermaco, Inc

11 Companion products to Solids Interceptor To help reduce the amount of incidental food solids collected in the Trapzilla Grease Interceptor, Thermaco, Inc. offers several options. Point Source Incidental Solids Separation The Flat Strainer (FS) separates and collects incidental solids such as rice, coleslaw and other food scraps larger than (3.175 mm) in diameter found in point source drain flows. Designed to replace food disposals. Dewatered solids may be emptied into a trash container. FS-1 Flat Strainer Centralized Incidental Solids Separation The Trapzilla Solids Separator (TSS) separates and collects all sizes of incidental solids. Designed to collect incidental solids in a central location, the TSS is installed upstream of the Trapzilla Grease Interceptor. Two convenient sizes are available: the TSS-70 stores 70 gal. (265 L) of solids while the TSS-95 stores 95 gal. (360 L) of solids. TSS-95 Solids Separator Thermaco, Inc Copyright 2011 Thermaco, Inc. 11

12 Cutaway Drawing of TSS - 95 showing operating principles Access Plugs allow Solids extraction Removable Cover Optional Collar(s) allow depth adjustment to drainage piping Vent Connection Inlet Outlet Drain water from source enters through Inlet Baffle Solids forced downward through Horizontal Baffle Clean water exits through Outlet Baffle Solids extraction tube Solids fall to bottom of tank Anchor Ring for In-Ground Installation (bury in concrete) Solids-laden effluent from the kitchen flow is slowed and forced downward in a horizontal baffle, where solids filter out of the flow and sink to the solids storage area. The cleaned effluent flows through the outlet. Pumping the Trapzilla Solids Separator is easy - the pumper unscrews the Solids plugs and vacuums out the solids. 12 Thermaco, Inc Copyright 2011 Thermaco, Inc

13 4.5" TSS-70 Specifications 37" U.S. and International Patents Issued and Pending SOLIDS DO NOT USE MECHANICAL CRUST BREAKING DEVICES AA TSS GPM (4.73 l/s) Manufacturer Rated Inlet Flow Rating: 75 GPM Construction: Rotationally Molded Polyethylene Solids Retention Capacity: 70 US Gallons ( Liters) 4 Inlet/Outlet (100 mm) FEATURES: Constructed of corrosion resistant materials suitable for installation in virtually any location. Compact footprint. TOP VIEW 4.5" 36" 18.5 CLEARANCE FROM TOP OF TANK REQUIRED FOR LID REMOVAL 2 VENT OUTLET INLET 38.5" 4" PIPE INLET/OUTLET 28.5" 29" SIDE VIEW " END VIEW 31" In order to provide the best products possible, specifications are subject to change US & International Patents/Patents Pending Thermaco, Inc Copyright 2011 Thermaco, Inc. 13

14 4.5" TSS-95 Specifications 37" U.S. and International Patents Issued and Pending SOLIDS DO NOT USE MECHANICAL CRUST BREAKING DEVICES AA TSS GPM (9.46 l/s) Manufacturer Rated Inlet Flow Rating: 150 GPM Construction: Rotationally Molded Polyethylene Solids Retention Capacity: 95 US Gallons ( Liters) 4 Inlet/Outlet (100 mm) FEATURES: Constructed of corrosion resistant materials suitable for installation in virtually any location. Compact footprint. TOP VIEW 4.5" 36" 29 CLEARANCE FROM TOP OF TANK REQUIRED FOR LID REMOVAL 2" VENT OUTLET INLET 4" PIPE INLET/OUTLET 49.5" 36.5" 37" SIDE VIEW END VIEW " 31" In order to provide the best products possible, specifications are subject to change US & International Patents/Patents Pending 14 Thermaco, Inc Copyright 2011 Thermaco, Inc

15 Grease Recovery Units Isolation & Containment Simply put, Isolation & Containment is protection of both the exterior plumbing (the collection system) and protection of the internal facility plumbing. Sewer codes often do not take into account the damage grease & oils can do to internal piping. Isolation (point-source grease separators) and Containment (in-ground/external grease separators) provides long-term facility plumbing system and sewer system protection. Using an interior point-source system in conjunction with a Trapzilla unit installed downstream protects the sewer system and the facility s plumbing. The typical grease generators inside a kitchen such as a three-compartment sink or pre-rinse station are treated using the grease recovery unit (GRU), while non-grease generating fixtures such as a dishwasher or mop sink are plumbed directly to the Trapzilla unit. The discharge from the GRU may also be plumbed to the Trapzilla unit. In short, Isolation is grease pretreatment at the source (GRU), while Containment is preventing grease from getting into the sewer lines (Trapzilla). Big Dipper Automatic Grease Recovery Unit Thermaco, Inc Copyright 2011 Thermaco, Inc. 15

16 What Size Trapzilla Do I Need? Suggested Models Grease Production Examples TZ-160 Low Level Grease Sandwich Shops, Coffee Production Shops TZ-400 or TZ-600 Combination of Trapzilla Grease Trap(s) and Trapzilla Solids Separator(s) Low to Moderate Level Grease Production Moderate to High Level Grease Production Pizza Parlors, Ice Cream Parlors, Bar & Grilles, Small Downtown Restaurants Full Service Restaurants Supercapacity Grease Traps Innovative, Compact Design Easy, Effective Compliance Trapzilla is a Registered Trademark of Thermaco, Inc. Trapzilla products are covered by U.S. and International patents and patents pending 6,849,176 6,878,270 7,153,439 7,186,346 * Please consult Thermaco, Inc. for details on the specific models tested, certified, accepted and/or listed by these organizations & for proper installation procedures. * TZCB-2 Copyright 2011 Thermaco, Inc Thermaco, Inc. P.O. Box 2548 Asheboro, NC info@thermaco.com (336) Fax: (336) Toll Free: (800)