MECHANICAL STEAM TRAPS

Transcription

1 29 MHNIL STM TRPS s Mechanical Trap line continues their tradition of offering high value with traditional designs while simultaneously pushing the performance envelope with leading edge technology. s merica s only domestic manufacturer of float technology, continues to provide performance and value.

2 30 Steam Lines pplications Process quipment Steam ookers Steam Heated Vats Pressing Machinery NOV NFT250 Series Variable Orifice Unit Heaters Steam Traps Oil Preheaters onverters Pressures To 250 PSIG oils Temperatures to 450 F Rotating rum Proven aged Stainless Steel alanced Pressure Thermostatic ir Vent automatically discharges air and non-condensables Stainless Steel Strainer with large screen area prevents dirt problems onnections Sizes 1/2 2 screwed NPT (SPT optional) Sizes 11/2 & 2 flanged NSI 250 Weighted Stainless Steel all multi-contact surface area modulates orifice discharge to provide smooth, continuous discharge and immediate response to load variations Stainless Steel Sleeve eliminates body erosion Stainless Steel Seat full bore prevents choking and permits ample capacities Liquid Level maintains seal over orifice to prevent live steam loss ottom & Side lowdown onnections for preventative maintenance Guarantee Traps are guaranteed against defects in materials or workmanship for 3 years.

3 pplications Steam Lines Unit Heaters Process quipment Oil Preheaters Steam ookers onverters Steam Heated Vats oils Pressing Machinery Rotating rum UR-FLO Inverted ucket Steam Trap Pressures To 250 PSIG Temperatures to 450 F 31 asy to Maintain Working parts lift out with top for quick inspection and maintenance. Resists orrosion Stainless steel bucket provides maximum service life with minimum deterioration. Minimizes ffects of Water Hammer Open bucket design avoids collapse typical of sealed floats. Suitable for Wide Variety of Loads/pplications Horizontal and vertical models in thirteen body sizes are one of the most comprehensive inverted bucket trap lines available. Withstands Severe onditions Heavy wall cast iron cover and body provide many years of trouble free service. Smooth ction and Tight Shutoff Stainless steel linkage, valve and seats are precision manufactured to insure optimal performance. Ideal for irty Systems Valve and seat located at top of trap and stainless steel strainers available on most horizontal models ensure long service. Maximum ompatibility with xisting Installations Pressure change assemblies are interchangeable with rmstrong which guarantees maximum flexibility when stocking repair parts.

4 32 NOV NFT250 SRIS VRIL ORIFI STM TRPS Pressures To 250 PSIG (17.2 barg) Temperatures to 450 F (232 ) PPLITIONS Steam Lines Process quipment Steam ookers Steam Heated Vats Pressing Machinery Unit Heaters Oil Preheaters onverters oils Rotating rum OPTIONS See Page 9 SLR - SLR Orifice - lowdown Valve (contact factory) Orifice ontinuous leed ir Vent 250# - 250# Flanged onnection* (Flat Faced) *vailable on NFT 253 only. ll Stainless Steel Internal omponents Hardened valves and seats. xtra long life and dependable service. Resists water hammer. Protects against erosion and corrosion. rosion Proof ischarge passage is protected with a stainless steel liner. Integral Strainer Stainless Steel screen prevents dirt problems. low-down connection provided. Thermostatic ir Vent Full balanced pressure element for immediate and complete air venting. Variable Orifice ondensate is discharged continuously through the seat ring which is modulated by the float. This provides a smooth, even flow without high velocity or steam entrainment. SLR Orifice Optional continuous bleed prevents flash steam lockup when it is impossible to install trap at low point in system. Guarantee Traps are guaranteed against defects in materials or workmanship for 3 years. MOLS NFT250 Low capacity NFT251 Medium capacity NFT252 High capacity NFT253 Super high capacity Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance S PG 102 anadian Registration # O OPRTION On startup, the thermostatic air vent (caged stainless welded bellows) is open, allowing air to flow freely through the vent valve orifice. When condensate flows into the trap, the float rises, allowing condensate to be discharged. Once air and non-condensibles have been evacuated, hot condensate will cause the thermostatic vent to close. ondensate will continue to be discharged as long as condensation occurs. uring normal operation, an increase in the load causes the liquid level in the trap to rise. The float then rises and rolls off the seat ring, allowing more condensate to flow out. The float sinks as the condensate load decreases, moving nearer to the seat ring, decreasing the effective size of the orifice and allowing less condensate to discharge. This provides smooth, continuous operation that reacts instantly to load variation while maintaining a water seal over the seat ring to prevent live steam loss.

5 NOV NFT250 SRIS VRIL ORIFI STM TRPS SPIFITION Steam trap shall be of float and thermostatic design. Float shall be free of levers, linkages, or other mechanical connections. Float shall be weighted to maintain orientation and shall act as the valve being free to modulate condensate through the seat ring. ir vent shall be of balanced pressure design with stainless steel welded encapsulated bellows capable of discharging air and noncondensable gases continuously within 15 F of saturated temperature. Trap shall contain integral strainer and stainless steel exhaust port sleeve. Trap shall be cast iron bodied suitable for pressures to 250 psi and available in 1/2" through 2" NPT or flanged. MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure ORIFI PMO psig (1.4 barg) imensions psig (3.5 barg) psig (6.9 barg) psig (10.3 barg) psig (17.2 barg) PM: Max. llowable Pressure: 250 psig (17.2 barg) TM: Max. llowable Temperature: 450 F (232 ) learance for Maintenance onnections: 1 2"-2" NPT or 1 1 2"-2" Flanged Inches (mm) Weight Model Size onnection Lbs. (kg) NFT250 1 /2 & 3 /4 NPT 4 1 /4 2 3 /4 3 5 /8 5 1 /2 6 (108) (69) (92) (140) (2.7) NFT251 3 /4 & 1 NPT 5 1 / / / /4 13 (140) (74) (116) (171) (5.9) NFT252 1 & 1 1 /2 NPT / / (279) (74) (197) (254) (18.6) NPT 13 3 / / / /8 120 NFT /2 & 2 (349) (74) (295) (391) (54.5) 250# Flg / / / /8 130 (400) (74) (295) (391) (59.1) learance for Maintenance MTRILS OF ONSTRUTION ody and over ast Iron STM 126 ll Internal Parts Stainless Steel ir Vent......alanced Pressure, Stainless Steel over Gasket Graphite Fiber 33 Maximum apacity lbs/hr (10 F elow Saturation) Orifice ifferential PSIG (barg) Trap Size Max P (.07) (.34) (.69) (1.03) (1.38) (2.07) (3.45) (5.17) (6.90) (8.62) (10.3) (12.1) (13.8) (15.5) (17.2) NFT NFT NFT NFT For Kg/Hr Multiply by.454

6 34 NOV NFT650 SRIS VRIL ORIFI STM TRPS Pressures To 650 PSIG (44.8 barg) Temperatures to 750 F (400 ) PPLITIONS Steam Lines Process quipment Steam ookers Steam Heated Vats Pressing Machinery Unit Heaters Oil Preheaters onverters oils Rotating rum OPTIONS See page 9 SLR - SLR Orifice - lowdown Valve (contact factory) ontinuous leed ir Vent 300# or 600# Flanged onnection* (Raised Face) *vailable on NFT652 and NFT653 only. ll Stainless Steel Internal omponents Hardened valves and seats. xtra long life and dependable service. Resists water hammer. Protects against erosion and corrosion. rosion Proof ischarge passage is protected with a stainless steel liner. Integral Strainer Stainless Steel screen prevents dirt problems. low-down connection provided. Thermostatic ir Vent Provided with balanced pressure element for immediate and complete air venting. Variable Orifice ondensate is discharged continuously through the seat ring which is modulated by the float. This provides a smooth, even flow without high velocity or steam entrainment. SLR Orifice Optional continuous bleed prevents flash steam lockup when it is impossible to install trap at low point in system. Guarantee Traps are guaranteed against defects in materials or workmanship for 3 years. MOLS NFT651 Low capacity NFT652 Medium capacity NFT653 High capacity Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance S PG 102 anadian Registration # O OPRTION On startup, the thermostatic air vent (caged stainless welded bellows) is open, allowing air to flow freely through the vent valve orifice. When condensate flows into the trap, the float rises, allowing condensate to be discharged. Once air and non-condensibles have been evacuated, hot condensate will cause the thermostatic vent to close. ondensate will continue to be discharged as long as condensation occurs. uring normal operation, an increase in the load causes the liquid level in the trap to rise. The float then rises and rolls off the seat ring, allowing more condensate to flow out. The float sinks as the condensate load decreases, moving nearer to the seat ring, decreasing the effective size of the orifice and allowing less condensate to discharge. This provides smooth, continuous operation that reacts instantly to load variation while maintaining a water seal over the seat ring to prevent live steam loss.

7 NOV NFT650 SRIS VRIL ORIFI STM TRPS SPIFITION Steam trap shall be of float and thermostatic design. Float shall be free of levers, linkages, or other mechanical connections. Float shall be weighted to maintain orientation and shall act as the valve being free to modulate condensate through the seat ring. ir vent shall be of balanced pressure design with stainless steel welded encapsulated bellows capable of discharging air and noncondensable gases continuously within 15 F of saturated temperature. Trap shall contain integral strainer and stainless steel exhaust port sleeve. Trap shall be cast steel bodied suitable for pressures to 650 psi and available in 1/2" through 2" NPT, Socket Weld, or flanged. MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure ORIFI PMO psig (1.4 barg) psig (3.5 barg) psig (6.9 barg) psig (12.1 barg) psig (20.7 barg) psig (27.6 barg) psig (41.4 barg) PM: Max. llowable Pressure: 650 psig (44.8 barg) TM: Max. llowable Temperature: 750 F (400 ) learance for Maintenance onnections: 1 2-2" NPT or " Flanged MTRILS OF ONSTRUTION learance for Maintenance ody & over......stm 216 Grade W over Gasket.....Spiral Wound 304 Stainless w/graphite filler ll Internal Stainless Steel ir Vent...alanced Pressure, Stainless Steel imensions Inches (mm) Weight Model Size Lbs. NPT 300# 600# (kg) NFT651 1 /2, 3 /4 & /2 3 1 / / /4 21 (140) (78) (138) (184) (9.5) / / / / /8 84 NFT652 (279) (349) (349) (75) (222) (290) (38.2) 1 1 /2 & / / / / /8 87 (279) (349) (370) (75) (222) (290) (39.5) 1 1 / / / /8 3 5 / / NFT653 (349) (426) (411) (84) (392) (406) (87.3) / / / / / (349) (424) (443) (84) (302) (406) (88.6) Maximum apacity - lbs/hr (10 degrees elow Saturation) Trap Orifice MX ifferential - PSIG (barg) Size P (.07) (.34) (.69) (1.38) (3.45) (5.17) (6.90) (10.3) (12.1) (13.8) (17.2) (20.7) (27.6) (34.5) (41.4) NFT NFT NFT For Kg/Hr Multiply by

8 36 FTN SRIS FLOT & THRMOSTTI STM TRPS Pressures To 125 PSIG (8.6 barg) Temperatures to 450 F (232 ) Universal Four-port esign Four possible hookup combinations of the H pattern body and piping dimensions similar to other major manufacturers allow maximum installation flexibility for easy replacement of other traps. Inlet and outlet taps on larger sized traps located in the cover to permit larger capacities. ll Stainless Steel Internal omponents Hardened valves and seats. xtra long life and dependable service. Resists water hammer. Protects against erosion and corrosion. alanced Pressure Thermostatic lement allows venting of non-condensibles while operating at design pressure. Rugged Welded Stainless Steel lement Increases service life. Wide Selection of ifferential Pressures Sizes 3/4" to 2" available with 15, 30, 75 and 125 psig differential pressures. ir Line Water Removal Special configuration FTN optimized for compressed air service. Repairable In-line an be serviced without disturbing system piping. PPLITIONS Unit Heaters & other Space Heating quipment Heat xchangers/reboilers Steam Heating oils Steam Main rips ir ompressor Receivers ir Line rips ir Powered Process quipment OPTIONS See page 9 Repair Kits MOLS FTN-15 Steam pressures to 15 PSIG FTN-30 Steam pressures to 30 PSIG FTN-75 Steam pressures to 75 PSIG FTN-125 Steam pressures to 125 PSIG FTN-75 ir pressures to 75 PSIG FTN-125 ir pressures to 125 PSIG Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance S PG 102 OPRTION ir entering trap is immediately discharged through the high capacity integral air vent. The thermostatic vent will close just prior to saturation temperature. The balanced design will allow venting of non-condensibles that collect in the float chamber when operating at design pressure. When steam enters the trap, the thermostatic air vent closes to prevent steam loss. When steam gives up it s latent heat, it becomes condensate. This condensate enters the trap and causes the stainless steel ball float to rise. Raising of the float opens the discharge valve, allowing condensate to be continuously discharged as it enters the trap. The condensate level in the trap body is maintained above the discharge seat, providing a positive seal against the loss of steam.

9 FTN SRIS FLOT & THRMOSTTI STM TRPS SPIFITION Steam trap shall be of float and thermostatic design. Float shall actuate the valve via a hinged lever and linkage. ir vent shall be of balanced pressure design with stainless steel welded encapsulated bellows capable of discharging air and noncondensable gases continuously within 15 F of saturated temperature. Traps through 1-1/4" shall employ H pattern connections to accommodate multiple piping configurations. Trap shall be cast iron bodied suitable for pressures to 125 psi and available in 3/4" through 2" NPT. 3 /4", 1" - ll 1 1 /4" - FTN-15, FTN /2", 2" - ll * 1 1 /4" - FTN-75, FTN-125, FTN-75*, FTN-125* 37 MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure ORIFI PMO psig (1.03 barg) psig (2.07 barg) psig (5.17 barg) psig (8.62 barg) PM: Max. llowable Pressure 250 psig (17.2 barg) TM: Max. llowable Temperature 450 F (232 ) MTRILS OF ONSTRUTION ody & over..ast Iron STM126 ll Internal Stainless Steel ir Vent (FTN only)....alanced Pressure, Welded Stainless Steel *1/8" NPT tap at top boss for balancing line. onnections: 3/4"-2" NPT imensions Model No. Size Inches (mm) Weight 1 lbs (kg) 3 / (159) (140) (84) (76) (146) (4.1) (159) (140) (84) (76) (146) (4.1) FTN-15, FTN / /2 (159) (146) (76) (97) (146) (4.3) 1 1 / (216) (108) (76) (18) (213) (8.2) (249) (123) (123) (3) (232) (11.8) 3 / (159) (140) (84) (76) (146) (4.1) (159) (140) (84) (76) (146) (4.1) FTN-75, FTN / FTN-75,FTN-125 (216) (108) (76) (18) (213) (8.2) 1 1 / (216) (108) (76) (18) (213) (8.2) (249) (123) (123) (3) (232) (11.8) Maximum apacity lbs/hr (10 F elow Saturation) Size ifferential PSIG (barg) Trap NPT Orifice 1/4 1/ (in.) (.017) (.034) (.069) (.138) (.345) (.690) (1.03) (1.38) (1.72) (2.07) (2.76) (3.45) (5.17) (6.90) (8.62) FTN-15 3/4" FTN-15 1" FTN /4" FTN /2" FTN-15 2" FTN-30 3/4" FTN-30 1" FTN /4" FTN /2" FTN-30 2" FTN-75 3/4" FTN-75 1" FTN /4" FTN /2" FTN FTN-125 3/4" FTN-125 1" FTN /4" FTN /2" FTN-125 2" For Kg/Hr Multiply by.454 For FTN capacities, multiply by 1.33.

10 38 MX-FLO SUPR HIGH PITY FLOT & THRMOSTTI STM TRPS Pressures to 175 PSIG (12.1 barg) Temperatures to 377ºF (192º) PPLITIONS Very High ondensate Loads ontinuous rainage With High ir Venting apacity Requirements Industrial nd ommercial pplications bsorption Systems ir Handling oils Heat xchangers ryers vaporators Hot water Generators Rendering Machines Steam Process quipment ir Make-up oils Unit Heaters nd ooking Kettles High apacities Rugged cast iron body and cover Stainless steel thermostatic element eliminates air binding Stainless steel float and lever mechanism elow condensate level seat design prevents steam leakage Resistant to water hammer and corrosion In-Line repairable MOLS H-15 - Steam pressures to 15 PSIG H-30 - Steam pressures to 30 PSIG H-75 - Steam pressures to 75 PSIG H Steam pressures to 125 PSIG H Steam pressures to 175 PSIG Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance S PG 102 OPRTION uring startup, air and non-condensible gases enter the trap and are automatically vented through an accurate balanced pressure internal thermostatic air vent. s condensate enters the trap, the float and lever mechanism is raised, lifting the valve off the seat, discharging the condensate. ondensate will continue to be discharged at the same rate at which it is entering. ny air or non-condensible gas that may accumulate will be continually and efficiently passed by the thermostatic air vent.

11 MX-FLO SUPR HIGH PITY FLOT & THRMOSTTI STM TRPS 1 1 4" & 1 1 2" 39 SPIFITION Steam trap shall be of float and thermostatic design. Float shall actuate the valve via a hinged lever and linkage. ir vent shall be of balanced pressure design with stainless steel welded encapsulated bellows capable of discharging air and noncondensable gases continuously. Trap shall be cast iron bodied suitable for pressures to 175 PSI and shall be a NPT connection. 2" rain F J H MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure see orifice selection TMO: Max. Operating Temperature saturated at pressure PM: Max. llowable Pressure 175 PSIG (12.1 barg) PM: Max. llowable Pressure 377ºF (192º) MTRILS OF ONSTRUTION ody & over ast Iron 30,000 psi tensile Valve Pin and Seat......Stainless Steel (Hardened) Float Stainless Steel Lever ssembly stainless Steel Thermostatic ir Vent Stainless Steel age & Thermal lement over olts grade 5 affle......stainless Steel (2-1/2 (65mm) units only) Inlet 2 1 2" ischarge F 1/4" Thermostatic Vent - To Thermostatic be piped to gravity Ventreturn line. F J K L 4-Holes, 17/32" ia. G G H imensions NPT Size Weight MOL in. (mm) F G H J K L lbs (kg) H & (32 & 40) (108) (211) (217) (76) (86) (51) (17.8) (35) (8) LL (50) (254) (381) (394) (168) (121) (89) (49) LL (65) (368) (514) (441) (241) (379) (159) (127) (305) (41) (114) (178) (79) Maximum apacity-lbs/hr ifferential - PSIG (barg) Trap Orifice 1/4 1/ Max P (0.017) (0.035) (0.07) (0.14) (0.35) (0.69) (1.0) (1.4) (1.69) (2.1) (2.8) (3.5) (4.2) (5.2) (6.9) (8.6) (10.4) (12.1) H-15, 2" H-15, 2 1 2" H-30, 2" H-30, 2 1 2" H-75, 2" H-75, 2 1 2" H-125, 2" H-125, 2 1 2" H-175, 1 1 4" H-175, 1 1 2" H-175, 2" H-175, 2 1 2" For Kg/Hr Multiply by.454

12 40 FT 10 FT 14 FT 43 FT 44 FT SRIS FLOT & THRMOSTTI STM TRPS Pressures to 464 PSIG (32 barg) Temperatures to 850ºF (454º) High apacities Rugged cast iron, ductile iron or cast steel body and cover Stainless steel thermostatic element eliminates air binding Stainless steel float and lever mechanism elow condensate level seat design prevents steam leakage Resistant to water hammer and corrosion In-Line repairable FT 44F PPLITIONS Very High ondensate Loads ontinuous rainage With High ir Venting apacity Requirements Industrial nd ommercial pplications bsorption Systems ir Handling oils Heat xchangers ryers vaporators Hot water Generators Rendering Machines Steam Process quipment ir Make-up oils Unit Heaters nd ooking Kettles MOLS ST IRON OY FT-10 To 200 PSIG Threaded onnections FT-43 To 200 PSIG Flanged onnections UTIL IRON OY FT-14 To 200 PSIG Threaded onnections ST STL OY FT-44 To 465 PSIG Threaded/Socket Weld onnections FT-44F To 465 PSIG Flanged onnections Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance on NPT Traps S PG 102 OPTIONS SPT Threaded connection S-SLR Orifice on FT-10 Socket Weld connection on FT-44 Flanged connections NSI 125/150, 300, 600 IN 10, 16, 25 or 40 S10 - F, H, J, K or R OPRTION uring startup, air and non-condensible gases enter the trap and are automatically vented through an accurate balanced pressure internal thermostatic air vent. s condensate enters the trap, the float and lever mechanism is raised, lifting the valve off the seat, discharging the condensate. ondensate will continue to be discharged at the same rate at which it is entering. ny air or non-condensible gas that may accumulate will be continually and efficiently passed by the thermostatic air vent.

13 FT SRIS FLOT & THRMOSTTI STM TRPS 41 SPIFITION Steam trap shall be of float and thermostatic design. Float shall actuate the valve via a hinged lever and linkage. ir vent shall be of balanced pressure design with stainless steel welded encapsulated bellows capable of discharging air and noncondensable gases continuously. Trap shall be bodied suitable for pressures to PSI and shall be a connection. MXIMUM OPRTING ONITIONS ST IRON/UTIL IRON PMO: Max. Operating Pressure see orifice selection TMO: Max. Operating Temperature saturated at pressure PM: Max. llowable Pressure 232 psig (16 barg) PM: Max. llowable Pressure 450ºF (232º) ST STL PMO: Max. Operating Pressure see orifice selection TMO: Max. Operating Temperature saturated at pressure PM: Max. llowable Pressure 465 psig (32 barg) TM: Max. llowable Pressure 850ºF (454º) MTRILS OF ONSTRUTION ody & over ast Iron (STM 48 I. 30) uctile Iron (IN 1693 GGG 40) ast Steel (STM 216 Gr. W) Valve Stainless Steel 304 (up to 1") Stainless Steel 410 (1 1 2", 2") Valve Seat Stainless Steel 410 Housing & Housing over for Float Mechanism STM 743 Gr. 40 (Investment ast) Float Stainless Steel 304 Lever ssembly Stainless Steel 304 Thermostatic irvent Stainless Steel 304 over olts S Gr. 8 onnections: 1/2" 2" NPT, Flanged or Socket Weld Maximum apacity lbs/hr (10ºF elow Saturation) Max P ifferential Pressure-PSIG (barg) Trap Size Orifice R PSI inlet (in.) (.345) (.690) (1.38) (2.76) (3.45) (4.50) (5.52) (6.90) (8.62) (10.0) (12.4) (13.8) / FT-10, 14, & 43 & / FT-10, 14, & FT-10 & FT-10 & / FT-44 & 44F & / FT-44 & 44F FT-44 & 44F FT-44 & 44F For Kg/Hr Multiply by.454

14 42 SRIS FT IMNSIONS F IMNSIONS inches (mm) N WIGHTS pounds (kg) SRIS FT-10 & FT 44 Size 1/2 3/ Inches (mm) Weight Lbs(kg) F FT-10 FT (128) (54) (54) (145) (110) (170) (4.8) (5.2) (128) (54) (54) (145) (110) (170) (4.8) (5.0) (128) (110) (75) (190) (160) (216) (8.5) (8.0) (282) (127) (110) (254) (200) (289) (22.5) (22.0) (308) (140) (127) (260) (200) (300) (28.0) (27.0) FT-10 ST IRON & FT-44 ST STL 1/2" & 3/4" F FT-10 ST IRON & FT-44 ST STL 1" F FT-10 ST IRON & FT-44 ST STL 1 1 2" & 2" Size 1/2 IMNSIONS inches (mm) N WIGHTS pounds (kg) SRIS FT-14 Inches (mm) Weight lbs. (kg) (121) (108) (67) (148) (3.6) 3/ (121) (108) (67) (148) (3.6) (145) (108) (76) (167) (4.6) FT-14-UTIL IRON 1/2", 3/4" & 1"

15 SRIS FT IMNSIONS 43 Size 1/2 3/4 IMNSIONS inches (mm) N WIGHTS pounds (kg) SRIS FT-43 Inches (mm) Weight Lbs. (kg) (150) (54) (54) (190) (110) (7.0) (150) (54) (54) (192) (110) (7.5) FT-43 ST IRON 1/2" & 3/4" (160) (110) (75) (245) (160) (11.5) (230) (127) (110) (333) (200) (28.0) (230) (140) (127) (343) (200) (34.0) FT-43 ST IRON 1" FT-43 ST IRON 1 1 2" & 2" Size 1/2 3/4 IMNSIONS inches (mm) N WIGHTS pounds (kg) SRIS FT-44F Inches (mm) Weight Lbs. (kg) (210) (54) (54) (141) (110) (7.5) (210) (54) (54) (141) (110) (8.0) FT-44F ST STL 1/2" & 3/4" (210) (110) (75) (190) (160) (11.5) (325) (127) (110) (245) (200) (27.5) (325) (140) (127) (251) (200) (34.0) FT-44F ST STL 1" FT-44F ST STL 1 1 2" & 2"

16 44 PPLITIONS Steam Lines Process quipment Steam ookers Steam Heated Vats Pressing Machinery Unit Heaters Oil Preheaters onverters oils Rotating rum OPTIONS See page 9 Repair Kits anadian Registration # O Installation Tip: lways install STV Test & lock Valve as part of trap station S PG 118 Installation Tip: dd Uniflex Pipe oupling for ease of maintenance S PG 102 UR-FLO INVRT UKT STM TRPS Pressures To 250 PSIG (17.2 barg) Temperatures to 450 F (232 ) Hardened Stainless Steel Valve and Seat Long life and maximum corrosion resistance. Stainless Steel ucket Long lasting, rugged and naturally resistant to water hammer. Inexpensive Low maintenance and initial cost. Repairable in-line ll working parts lift out of top of trap. ast Iron ody urable heavy wall construction provides years of reliable service. Suitable for Wide Variety of Loads/pplications Horizontal and vertical models in thirteen body sizes. Resists irt and Scale Valve and seats positioned at top of traps and internal stainless strainer available on most horizontal models ensure long service. MOLS 80S Low capacity horizontal w/integral strainer 81S Medium low capacity horizontal w/integral strainer 82S Medium capacity horizontal w/integral strainer 83S Medium high capacity horizontal w/integral strainer 84 High capacity horizontal 85 Super high capacity horizontal 86 Ultra high capacity horizontal 21 Medium low capacity vertical 22 Medium capacity vertical 23 Medium high capacity vertical 24 High capacity vertical 25 Super high capacity vertical 26 Ultra high capacity vertical OPRTION Trap losed fter trap is installed and primed, steam entering the trap collects in the top of the bucket, floating the bucket and forcing the valve into its seat. Trap egins to Open s condensate begins to flow into the trap, steam and air are forced from the bucket. This causes the bucket to begin losing buoyancy, tending to pull the valve from its seat. Trap ischarges When enough condensate has entered the trap, displacing the steam and air, the bucket drops, pulling the valve from the seat and allowing condensate and air to discharge. Trap loses s the flow of condensate stops, steam enters the trap and refloats the bucket, forcing the valve into its seat. The cycle then repeats as more condensate reaches the trap.

17 UR-FLO INVRT UKT STM TRPS 45 SPIFITION Furnish and install as shown on the plans, inverted bucket traps capable of discharging condensate, air and other noncondensible gases without loss of steam. These traps shall have a heavy cast iron body, hardened stainless steel valve and seat, all stainless steel linkage and bucket, and an asbestos free fiber cover gasket. 80 SRIS, HORIZONTL 20 SRIS, VRTIL MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure see orifice selection TMO: Max. Operating Temperature saturated at pressure PM: Max. llowable Pressure 250 psig (17.2 barg) TM: Max. llowable Temperature 450 F (232 ) MTRILS OF ONSTRUTION ody & over ast Iron STM--126/48 ucket & Linkage Stainless Steel Valve & Seat Hardened hrome Steel Standpipe Steel Pipe over Gasket sbestos Free Fiber onnections: 1 2" 2 1 2" NPT UR-FLO imension Table Trap nd Inches (mm) Weight onnections Lbs (kg) 80S 1 2, (129) (69) (89) (3.2) 81S 1 2, 3 4, (129) (69) (113) (3.6) 82S 1 2, (178) (98) (138) (10.0) 83S 3 4, (206) (127) (194) (14.5) 84 1, (229) (146) (199) (21.3) , (260) (203) (213) (33.6) 86 2, (330) (248) (279) (63.5) (162) (108) (2.9) , (203) (143) (7.3) , (267) (175) (12.7) 24 1, (318) (190) (15.9) 25 1, (365) (230) (27.2) , (424) (260) (40.8)

18 46 UR-FLO PITY TLS Trap Orifice S Size Max P (.034) (.069) (.345) (.690) (1.03) (1.38) (1.72) (2.07) (2.76) (4.14) (4.83) (5.52) (6.90) (8.62) (8.97) (10.3) (12.4) (13.8) (15.5) (17.2) 3/ / / / / / S 5/ & 21 1/ / / / / S 3/ & 22 5/ / / / / / S & 9/ / / / / / / & 11/ / / / / / / / & 25 11/ / / / / / / / & 26 9/ / / / For Kg/Hr Multiply by.454

19 UR-FLO INVRT UKT STM TRPS P RPIR KITS Quick, easy and economical Simplifies and standardizes inventory ll stainless steel corrosion resistant internal parts Hardened stainless steel condensate valves and seats for extra long life ST RING P SRWS (2 req d) VLV LINKG SS Y 47 MOLS 80S Orifice ratings 20, 80, 125, S & 21 Orifice ratings 15, 30, 70, 125, 200, S & 22 Orifice ratings 15, 30, 70, 125, 200, S & 23 Orifice ratings 15, 30, 60, 80, 125, 180, & 24 Orifice ratings 15, 30, 60, 80, 125, 180, & 25 Orifice ratings 15, 30, 60, 100, 130, 180, 225, & 26 Orifice ratings 15, 25, 40, 60, 80, 125, 180, 250 NMPLTS (2 req d) PIVOT RKT Supplied in a labeled, clear plastic bag. FTN SRIS FLOT & THRMOSTTI STM TRPS RPIR KITS High quality replacement kits Rebuild existing F & T Traps far more economically than replacement Quick, easy and economical Simplifies and standardizes inventory ll stainless steel corrosion resistant internal parts Hardened stainless steel condensate valves and seats for extra long life Repairs other leading manufacturers F & T Traps MOLS FTN-15 available in 3 4", 1", 1 1 4", 1 1 2" and 2" FTN-30 available in 3 4", 1", 1 1 4", 1 1 2" and 2" FTN-75 available in 3 4", 1", 1 1 4", 1 1 2" and 2" FTN-125 available in 3 4", 1", 1 1 4", 1 1 2" and 2" ll 3 4" and 1" kits as well as 1 1 4" FTN-15 and FTN-30 kits supplied with cover assembly. ll 1 1 4" FTN-75 and FTN-125 kits as well as all 1 1 2" and 2" kits supplied as mechanism complete. See apacity harts on page 37 onsult factory for latest crossover fitments.

20 48 SL STINLSS STL UR-FLO INVRT UKT STM TRPS Pressures to 650 PSIG (45 barg) Temperatures to 497ºF (258º) PPLITIONS Steam Lines Process quipment Steam ookers Steam Heated Vats Pressing Machinery Unit Heaters Oil Preheaters onverters oils Rotating rum anadian Registration #: O For information on ig lock UMTVS- onnector S PG 116 OPRTION fter trap is installed and primed, steam entering the trap collects in the top of the bucket, floating the bucket and forcing the valve into its seat. s condensate begins to flow into the trap, steam and air are forced from the bucket. This causes the bucket to begin losing buoyancy, tending to pull the valve from its seat. When asy Trap Replacement Universal two bolt swivel mounting option simplifies removal from system. Simple Installation Stainless mounting lock mounts permanently into system. Trap installs via two bolt universal mount connection. Hardened hrome Steel Valve and Seat Long life and maximum corrosion resistance. Stainless Steel ucket Long lasting, rugged and naturally resistant to water hammer. Inexpensive Low maintenance and initial cost. Stainless Steel ody urable heavy wall construction provides years of reliable service and resists corrosion and freezing. Suitable for Wide Variety of Loads/pplications Horizontal models in three body sizes. Resists irt and Scale Valve and seats positioned at top of traps ensure long service. Maintenance Free (TST-_S and UST-_S) Sealed design prevents unnecessary tampering. Trap can be inspected and replaced without breaking pipe. Freeze Resistant xtruded SS ody helps prevent problems associated with freezing conditions. MOLS NPT ONNTION TST-LS Low apacity, 200 PSIG TST-MS Medium apacity, 340 PSIG TST-HS High apacity, 650 PSIG UMT ONNTION UST-LS Low apacity, 200 PSIG UST-MS Medium apacity, 340 PSIG UST-HS High apacity, 650 PSIG UMT ONNTOR LOKS UMT Standard connector (1/2" & 3/4" only) UMTY-RH Right Hand onnector with Y Strainer UMTY-LH Left Hand connector with Y Strainer UMTVS- onnector with Isolation Valves, Strainer, lowdown Valve and Test Port enough condensate has entered the trap, displacing the steam and air, the bucket drops, pulling the valve from the seat and allowing condensate and air to discharge. s the flow of condensate stops, steam enters the trap and re-floats the bucket, forcing the valve into its seat. The cycle then repeats as more condensate reaches the trap.

21 SL STINLSS STL UR-FLO INVRT UKT STM TRPS SPIFITION Furnish and install as shown on the plans, inverted bucket traps capable of discharging condensate, air and other non-condensable gases without loss of steam. These traps shall have a stainless steel sealed body, hardened chrome steel valve and seat and an all stainless steel linkage and bucket. It shall have a universal mount connector option. MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure See Orifice Selection TMO: Max. Operating Temperature Saturated at PMO PM: Max. llowable Pressure - LS 200 psig (13.8 barg) at 450ºF (232º) MS 307 psig (21.2 barg) at 450ºF (232º) HS 650 psig (44.8 barg) at 497ºF (258º) TM: Max. llowable Temperature - MS, LS & HS - 800ºF (425º) MTRILS OF ONSTRUTION ody ISI 304 SS ucket ISI 304 SS ucket lip ISI 304 SS Lever ISI 304 SS Inlet Tube ISI 304 SS Valve Hardened hrome Steel ISI 3 Valve Seat Hardened hrome Steel ISI 3 onnector ISI 304 SS TST SL SRIS Model TST-LS TST-MS TST-HS onnections: 3/8" 1" NPT IMNSIONS inches (mm) N WIGHTS pounds (kg) Inches (mm) Weight lbs(kg) (70) (142) (110) (116) (1) (70) (167) (110) (141) (1.1) (99) (218) (127) (187) (3.2) 49 UST SL SRIS onnections: Universal Mount Two olt Swivel onnection IMNSIONS inches (mm) N WIGHTS pounds (kg) Model Inches (mm) Weight lbs(kg) UST LS (70) (152) (70) (117) (101.6) (2) UST MS (70) (183) (70) (148) (101.6) (2.2) UST HS (99) (222) (70) (187) (127) (3.2) Maximum apacity (lbs/hr) ifferential Pressure Orifice Trap Size MOP (0.34) (0.69) (1.03) (2.07) (2.76) (4.83) (5.52) (8.62) (13.79) (17.24) (20.69) (27.59) (44.83) ST-LS & TST-LS 3/ / / UST-MS 5/ & 1/ TST-MS 7/ / / * 1/ UST-HS 3/ & 1/ TST-HS 7/ / For Kg/Hr Multiply by.454 * RN not available

22 50 PPLITIONS Steam Lines Process quipment Steam ookers Steam Heated Vats Pressing Machinery Unit Heaters Oil Preheaters onverters oils Rotating rum anadian Registration # O For information on ig lock UMTVS- onnector S PG 116 RPIRL STINLSS STL UR-FLO INVRT UKT STM TRPS Pressures to 650 PSIG (45 barg) Temperatures to 497ºF (258º) asy Trap Replacement Universal two bolt swivel mounting option simplifies removal from system. Simple Installation Stainless mounting lock mounts permanently into system. Trap installs via two bolt universal mount connection. Hardened hrome Steel Valve and Seat Long life and maximum corrosion resistance. Stainless Steel ucket Long lasting, rugged and naturally resistant to water hammer. Inexpensive Low maintenance and initial cost. Stainless Steel ody urable heavy wall construction provides years of reliable service and resists corrosion and freezing. Suitable for Wide Variety of Loads/pplications Horizontal models in three body sizes. Resists irt and Scale Valve and seats positioned at top of traps ensure long service. Repairable Model (TST-_R & UST-_R) Removable cover allows pressure change or repair with existing ura-flo P kits. MOLS NPT ONNTION, RPIRL TST-LR Low apacity, 200 PSIG TST-MR Medium apacity, 400 PSIG TST-HR High apacity, 650 PSIG UMT ONNTION, RPIRL UST-LR Low apacity, 200 PSIG UST-MR Medium apacity, 400 PSIG UST-HR High apacity, 650 PSIG UMT ONNTOR LOKS UMT Standard connector (1/2" & 3/4" only) UMTY-RH Right Hand onnector w/y strainer* UMTY-LH Left Hand onnector w/y strainer* UMTVS- onnector with Isolation Valves, Strainer, lowdown Valve and Test Port OPRTION fter trap is installed and primed, steam entering the trap collects in the top of the bucket, floating the bucket and forcing the valve into its seat. s condensate begins to flow into the trap, steam and air are forced from the bucket. This causes the bucket to begin losing buoyancy, tending to pull the valve from its seat. When enough condensate has entered the trap, displacing the steam and air, the bucket drops, pulling the valve from the seat and allowing condensate and air to discharge. s the flow of condensate stops, steam enters the trap and re-floats the bucket, forcing the valve into its seat. The cycle then repeats as more condensate reaches the trap.

23 RPIRL STINLSS STL UR-FLO INVRT UKT STM TRPS SPIFITION Furnish and install as shown on the plans, inverted bucket traps capable of discharging condensate, air and other non-condensable gases without loss of steam. These traps shall have a stainless steel sealed body, hardened chrome steel valve and seat and an all stainless steel linkage and bucket. It shall also have a universal mount connection option. The repairable traps shall have a removable cover to allow repair or orifice change. MXIMUM OPRTING ONITIONS PMO: Max. Operating Pressure See Orifice Selection TMO: Max. Operating Temperature Saturated at PMO PM: Max. llowable Pressure - LR 200 psig (13.8 barg) at 450ºF (232º) MR 420 psig (29.0 barg) at 450ºF (232º) HR 650 psig (44.8 barg) at 497ºF (258º) TM: Max. llowable Temperature 800ºF (425º) MTRILS OF ONSTRUTION ody STM 351 F8 over STM 351 F8 ucket ISI 304 SS ucket lip ISI 304 SS Lever ISI 304 SS Inlet Tube ISI 304 SS Valve Hardened hrome Steel ISI 3 Valve Seat Hardened hrome Steel ISI 3 Swivel onnector ISI 304 SS over Gasket Spiral Wound 304 SS with Grafoil Maximum apacity (lbs/hr) Trap Orifice ifferential Pressure 51 UST RPIRL SRIS Size MOP (0.34) (0.69) (1.03) (2.07) (2.76) (4.83) (5.52) (8.62) (13.79) (17.24) (20.69) (27.59) (44.83) TST-LR, UST-LR 3/ / / TST-MR, 5/ UST-MR 1/ TST - HR UST-HR 7/ / / / TST RPIRL SRIS 3/ IMNSIONS inches (mm) N WIGHTS pounds (kg) Model Inches (mm) Weight lbs(kg) TST-LR (73) (159) (110) (141) (3.0) TST-MR (73) (184) (110) (166) (3.2) TST-HR (104.8) (241.3) (127) (215.9) (10) IMNSIONS inches (mm) N WIGHTS pounds (kg) Model Inches (mm) Weight lbs(kg) UST LR (73) (161) (70) (143) (108) (3.3) UST MR (73) (186) (70) (168) (108) (3.6) UST HR (104.8) (247.7) (70) (222.3) (158.8) (11.33) 1/ / / onnections: 3/8" 1" NPT onnections: Universal Mount Two olt Swivel onnection For Kg/Hr Multiply by.454

24 52 LIQUITOR UMT-T Series Thermodynamic pplications Steam Trap Unit Heaters Steam Tracing rip Legs Tire Presses Laundry quipment Plating Tanks Platen Presses ooking quipment Pressures To 450 PSIG Temperatures to 650 F asily Maintained Four bolt cover permits easy in-line rebuilding for less than the cost of replacement. Optional Integral Strainer Helps prevent dirt and scale build-up on valve seat. urability and Long Service Life Stainless steel body and cover with stainless steel eltron artridge for maximum corrosion, thermal and hydraulic shock resistance. xcellent nergy Savings Positive shutoff assures no loss of steam during normal operation. Unaffected by mbient onditions Steam jacketing minimizes steam loss. Fits all Universal onnectors Liquidator body will replace any manufacturers universal mount trap body. last ischarge lears away dirt and scale. asily Replaced Two bolt design permits rapid removal without breaking pipe connections. 3 Year Guarantee Guaranteed against defects in material and workmanship. Freeze Proof Self draining when installed vertically.