culus and CE Marked for all applicable directives Operating Environment Operating Temperature [C (F)]

Transcription

1 8 mm Cylindrical Description The 8 mm cylindrical family of general purpose photoelectric sensors is intended for light to medium duty industrial applications. The family provides an indication if the sensor operation is unstable. An indicator flashes if the signal level is too close to the detection threshold. This helps for easy alignment of the sensor and forewarns against detection of a background. Features S 8 mm industry standard enclosure S Extended range highspeed models S Patented ASIC design offers linear sensitivity, stability indication and excellent noise immunity S Two indicators provide status of power, output, unstable operation and short-circuit protection S Specifications Environmental Certifications Operating Environment Operating Temperature [C (F)] culus and CE Marked for all applicable directives IP (- 58 ) Vibration 55 Hz, mm amplitude, meets or exceeds IEC Shock g with ms pulse duration, meets or exceeds IEC Relative Humidity Ambient Light Immunity Optical Sensing Modes 5 95% (noncondensing) Incandescent light 5 lux Retroreflective, polarized retroreflective, diffuse, background suppression, transmitted beam Sensing Range See Product Selection table on page -55 Light Source Indicators Adjustments Electrical Current Consumption Sensor Protection Outputs Visible red (66 nm) or infrared (88 nm) Green and yellow, see User Interface below on select models V DC ma max Reverse polarity, overload, short circuit Response Time See Product Selection table on page -55 Output Type Output Mode Output Current Output Leakage Current Mechanical Housing Material Lens Material Connection Types Supplied Accessories or by cat. no. light or dark, selectable light or dark for background suppression models μa max PBT PMMA m cable, -pin DC micro (M) QD 8 mm fastening nuts Optional Accessories See mounting brackets, s, and cordsets on page -56 User Interface Color State Status OFF Output de-energized Yellow ON Output energized OFF Power is OFF ON Power is ON Green Flashing (6 Hertz) Flashing (.5 Hertz) Unstable (.5 < Margin < ) Output short-circuit protection active Approximate Dimensions [mm (in.)] 6.5 (.65) Dia. Adjustment 7 (.67) 66.5 (.6).7 (.6).8 (.7) M8 x 6.5 (.65) Dia. 9.7 (.8) M x M8 x Adjustment 7 (.67) 7.5 (.9).7 (.6).8 (.7) wire or pin of connector. -5 Visit our website:

2 8 mm Cylindrical Wiring Diagrams Models with Outputs LO DO Brown () () White () Blue () Transmitted Beam Emitter Brown () () Blue () Models with Outputs Brown () DO White () LO () Blue () M Male For normal operation, black wire (pin ) needs no connection. To disable light source, connect black wire (pin ) to V. Additional Wiring Options for Background Suppression and Transmitted Beam Output Cable Quick-Disconnect Brown Brown White White Blue Blue Face View Male Receptacle (Sensor) DC Micro Open circuit or tie white () and brown () conductors together for L.O. Tie white () and blue () conductors together for D.O. Output Cable Brown White Blue Quick-Disconnect Brown White Blue Face View Male Receptacle (Sensor) DC Micro Tie white () and brown () conductors together for L.O. Open circuit or tie white () and blue () conductors together for D.O. Typical Response Curves [ mm]. (.79) Grey Paper 8% 6 (.6) (.9) (5.5) Background Suppression [5 mm] Paper 6% (.) (.9) (.9) Background Suppression [ mm] Paper 6% (. (.9 (.9) Visit our website: -5

3 8 mm Cylindrical Typical Response Curves (continued) Retroreflective [.8 m] Retroreflective [7. m] Polarized Retroreflective [.8 m]. (.) with 9-7. (.) (.8) with 9 - (.8). (.) with 9-7 (.8) with 9 - (.8). (.) with 9-7. (.) (.8) with 9 - Beam Pattern Retroreflective [.8 m] Retroreflective [7. m] Polarized Retroreflective [.8 m] (.) (6.56) (9.8) (.)(6.) (6.56) (.) (9.7) (.6) (.) (6.56) (9.8) (.) (.8) [ mm] [ m] Transmitted Beam [6 m] (X) (X) (X) (.) (.9) (.9) (9.) (.) (.9) (.9) (9.) (9.7). (.) (.8) (.8) (8) Beam Pattern [ mm] [ m] Transmitted Beam [6 m] (.9) (7.87) (.8) (5.7) (7.87)(5.75)(.6) (.5) (9.) (.) (6.) (9.) (5.5) (65.6) Beam Diameter (m) Beam Diameter (m) -5 Visit our website:

4 8 mm Cylindrical Product Selection Sensing Mode Operating Supply Current Sensing Distance Output Energized Output Type/ Response Time Adjust Cat.. Retroreflective Field of View:._ Emitter : Visible red 66 nm V DC mm.8 m (.8 in 5.7 ft) ms ms -UMNB-D -UMPB-D Retroreflective Field of View:._ Emitter : Visible red 66 nm V DC mm 7. m (.8 in.6 ft) -UMNA-D -UMPA-D Polarized Retroreflective Field of View:._ Emitter : Visible red 66 nm V DC mm.8 m (.8 in.5 ft) ms ms -PMNB-D -PMPB-D Field of View: _ Emitter : Infrared 88 nm V DC ma max. mm (.9 in.) ms ms -DMNAE-D -DMPAE-D Field of View: 7.5_ Emitter : Infrared 88 nm V DC mm ( 5.7 in.) ms ms -DMNAJ-D -DMPAJ-D Field of View: 5_ Emitter : Infrared 88 nm V DC ma max. mm ( 9. in.) -DMNAL-D -DMPAL-D Suffix D denotes -pin DC micro connection type. For m cable without QD replace suffix D with A (e.g. PMPBA). Refer to for updated information. Visit our website: -55

5 8 mm Cylindrical Product Selection (continued) Sensing Mode Operating Supply Current Sensing Distance Output Energized Output Type/ Response Time Adjust Cat.. Background Background Suppression Field of View: 5.7_ Emitter : Visible red 66 nm V DC ma max. 5 mm (.97 in.) Selectable light or dark -BLNBC-D -BLPBC-D Background Background Suppression Field of View:._ Emitter : Visible red 66 nm Transmitted Beam Field of View:.5_ Emitter : Infrared 88 nm V DC ma max. V DC ma max. V DC mm (.9 in.) mm 6 m (. in 5.5 ft) Selectable light or dark NA infrared light source NA ms ms -BLNBE-D -BLPBE-D -EEZB-D -RMNA-D -RMPA-D Suffix D denotes -pin DC micro connection type. For m cable without QD replace suffix D with A (e.g. PMPBA). Refer to for updated information. Cordsets and Accessories Cordset Accessories Description Cat.. Description Cat.. Description Cat.. DC Micro QD Cordset, -pin, m Right Angle DC Micro QD Cordset, -pin, m 889D-FAC- Mounting Bracket Reflector 9-889D-RAC- Straight Mounting Bracket Reflector 9-7 Snap -Clamp Mounting Bracket Right Angle Mounting Bracket 87A -SCBP Visit our website: