Expert dialogue on technical. Industry 4.0. Moscow, Dipl.-Ing. Petra Scharf, DIN Head of International Cooperation
|
|
- Valerie Perkins
- 5 years ago
- Views:
Transcription
1 Expert dialogue on technical regulation in the EAEU Industry 4.0 Moscow, Dipl.-Ing. Petra Scharf, DIN Head of International Cooperation
2 Standardization Roadmap on Industry 4.0 The Standardization Council Industry 4.0 organizes and coordinates the development of the Standardization Roadmap (at present: Version 2) All relevant stakeholders in the field of Industry 4.0 are included in the development process Experts from both the public and private sectors are engaged in drawing up the Standardization Roadmap The Standardization Roadmap is continually revised and published 2018, DIN e. V. 2
3 Standardization Roadmap on Industry 4.0 Summarizes ongoing activities and the work resulting out of these activities Gives an overview of all relevant stakeholders Gives a comprehensive overview of the current status of standardization Lists existing standards and specifications Outlines the need for further standardization and gives recommendations for action Roadmap is currently under review Version 3 to be released by April 2018 Current Version available for download: , DIN e. V. 3
4 DIN SPEC Reference Architecture Model RAMI4.0 is a reference architecture model for semantic technologies and their benefits for automation and its associated technologies. One of the fundamental ideas on RAMI4.0 is the grouping and description of highly diverse aspects in a common model. RAMI4.0 permits step by step migration from the world of today to that of I4.0, and the definition of application domains with special stipulations and requirements. DIN SPEC on RAMI4.0 published in April , DIN e. V. 4
5 DIN SPEC Taxonomy of Rules and Regulations in Smart Data This DIN SPEC presents a classification framework for technical rules, specifications and solutions, economic models and guidelines, laws and legal regulations, other documents describing requirements or guidance in technical, economic or legal areas for products & services within the field of Smart Data. 2018, DIN e. V. 5
6 DIN SPEC Network-architecture to protect highly sensitive data DIN SPEC was developed to enrich ISO/IEC framework. It specifies a relatively simple, but effective network-architecture, against non-authorized access and manipulation. It is a system composed of a three server architecture. One connected to the internet, one for access management and one for the application data. The access management level allows for controlled communication between the internet server and the application server. This DIN SPEC, proposed by an innovative start-up, is a good example to gain market visibility. AP 2018, DIN e. V. 6
7 DIN SPEC now free of charge awailable via download from the Beuth Webshop! Just visit the Beuth Website: or go directly to , DIN e. V.
8 Further examples of standards in support of Industrie 4.0 Additive Manufacturing DIN SC Technology of Materials (NWT): standardization in the field of powder metallurgy, heat treatment technology and laser technology DIN EN ISO 529xx - series Functional Safety Digitisation demands interaction between functional safety and IT Security IEC 61508, IEC Robots and robotic devices DIN-NAM, SC Mechanical Engineering: Collaborative robots - guidelines where robot systems and people share the same workspace DIN ISO/TS 15066; DIN SPEC 5306: Security Gateway Reference architecture of a security gateway for the exchange of industry data and services DIN SPEC 27070: Shop Floor & Office Floor i. e. DIN SC Information Technology (NIA): Safety & Security Management on Shop-Floor and Office-Floor level IEC 62443, ISO/IEC 270xx Innovationmanagement DIN SC Services (NADL) guidance on establishing and maintaining an innovation management system (IMS). DIN CEN/TS , DIN SPEC , DIN e. V. 8
9 Standardization Activities Overview Germany Europe International DIN-Standards Committees (e.g. NATG, NIA, NAErg, NAM etc.) Standardization Council Industry 4.0 DKE-Standards Committees Platform Industry 4.0 under direction of BMWi/BMBF Industrial Data Space VDI-GMA ZVEI BITKOM VDMA CEN/TC 310 Advanced Automation technologies and their applications CEN/TC 319 Maintenance CEN/TC 438 Additive Manufacturing onem2m - Standards for M2M and the Internet of Things ISO/TC 10 Technical Product documentation ISO/TC 184 Automation systems and integration ISO/TC 261 Additive manufacturing ISO/IEC JTC1 Information technology ISO/SMCC Smart Manufacturing IEC/TC 3 Information structures and elements IEC/TC 8 Systems aspects for electrical energy supply IEC/TC 65 Industrial-process measurement, control, automation IEC/SC 3D Product properties, classes and their identification IEC/SEG 7 Industry 4.0 Smart Manufacturing 2018, DIN e. V. 9
10 ISO Coordinating Committee Smart Manufacturing (ISO/SMCC) To provide a definition of Industry 4.0/Smart manufacturing To give an overview on available standards, use cases and current work related to Industry 4.0/Smart manufacturing To identify possible gaps where additional standards are needed To make recommendations on actions to be taken To monitor other national, regional and international activities and suggest cooperation mechanisms with partner organizations 2018, DIN e. V. 10
11 DIN e. V. Am DIN-Platz Burggrafenstraße Berlin 2015, DIN e. 11 V.
Security Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationIntroduction to ISO and ISO membership
Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationISO Series of Standards on Management System. Christian Levy Président french commission of standardisation
ISO 37101 Series of Standards on Management System Christian Levy Président french commission of standardisation Working groups of technical comite of TC «sustainable cities» ISO/TC 268 Sustainable development
More informationISO and services ANSI Conference: Standards and the Service Economy. Presented by Kevin McKinley Acting Secretary-General, ISO
2015 ANSI Conference: Standards and the Service Economy ISO and services Presented by Kevin McKinley Acting Secretary-General, ISO September 29, 2015 1 Part of the World Standards Week 2015 series of events
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationSMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice
SMB/4676/R IEC/TC or SC TC 62 Secretariat Germany STRATEGIC BUSINESS PLAN (SBP) Date 2011-09-23 Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationISO 14004:2004, Environmental Management Systems - General Guidelines On Principles, Systems And Support Techniques By ISO/TC 207/SC 1 READ ONLINE
ISO 14004:2004, Environmental Management Systems - General Guidelines On Principles, Systems And Support Techniques By ISO/TC 207/SC 1 READ ONLINE If you are searching for the ebook by ISO/TC 207/SC 1
More informationBSI the UK National Standards Body: The Role of Standards
BSI the UK National Standards Body: The Role of Standards Anthony Burd - Head of Sector - Construction Copyright 2012 BSI. All rights reserved. This Session The BSI Group and the role of standards British
More informationISO Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles
More informationEuropean Standardization for the Natural Gas Infrastructure
European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009 Content The standards framework Benefits
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL
More informationISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail
INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)
More informationStandards for nanotechnologies
Standards for nanotechnologies Dr Peter Hatto, Chairman ISO TC 229, CEN TC 352 and BSI NTI/1 Nanotechnologies standardization committees Director of Research, IonBond Ltd Standards and standardization
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationISO INTERNATIONAL STANDARD. Fire safety engineering General principles. Ingénierie de la sécurité incendie Principes généraux
INTERNATIONAL STANDARD ISO 23932 First edition 2009-06-15 Fire safety engineering General principles Ingénierie de la sécurité incendie Principes généraux Reference number ISO 23932:2009(E) ISO 2009 PDF
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationRole of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
More informationISO Clean Version of Revised Working Draft (N 348)
ISO/TC 145/SC 2/WG 1 N 358 Date: 2006-05-29 Source: ISO/TC 145/SC 2/WG 1 Secretariat Project: ISO 23601 Status: 20.20 (WD study initiated) Requested action: for information Distribution: Members of ISO/TC
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationFor IEC use only. SMB Meeting 157, Frankfurt
For IEC use only SMB/5906/SBP 2016-05-27 INTERNATIONAL ELECTROTECHNICAL COMMISSION STANDARDIZATION MANAGEMENT BOARD SUBJECT SMB Meeting 157, Frankfurt Updated Strategic Business Plan of IEC TC 97, Electrical
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62351-10 Edition 1.0 2012-10 colour inside Power systems management and associated information exchange Data and communications security Part 10: Security architecture guidelines
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationContribution of cooperation to innovation policies
Contribution of cooperation to innovation policies Nicolas Singer, Head of the Project Unit INTERREG IVC Joint Technical Secretariat Wire 2014 / 12 June 2014 Summary 1. Cooperation? 2. Innovation in INTERREG
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationIEC Ed. 1.0 En:2003, Fixed Resistors For Use In Electronic Equipment - Part 9-1: Blank Detail Specification: Fixed Surface Mount
IEC 60115-9-1 Ed. 1.0 En:2003, Fixed Resistors For Use In Electronic Equipment - Part 9-1: Blank Detail Specification: Fixed Surface Mount Resistor... Measurable Resistors - Assessment Level EZ By IEC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
More informationUNECE Committee on Housing and Land Management activities on urban development
UNECE Committee on Housing and Land Management activities on urban development GULNARA ROLL, UN ECONOMIC COMMISSION FOR EUROPE HOUSING AND LAND MANAGEMENT UNIT Areas of work Sustainable Housing and Real
More informationA holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved.
Stephan Griebel, Siemens AG, Braunschweig A holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved. Overview 1. Introduction
More informationCross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities
Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities IoT for Smart Cities and Communities Bilbao (2018-06-06) CEN and CENELEC 1 Who we are & Where do we fit in International
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62785 Edition 1.0 2013-02 Guidance on the environmentally conscious design of fibre optics related products and subsystems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE L
More informationThis is a preview - click here to buy the full publication
ISO/IEC 14763-3 CONSOLIDATED VERSION Edition 2.1 2018-08 colour inside Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling INTERNATIONAL
More informationAlpine Green Infrastructure Joining forces for nature, people and the economy
Alpine Green Infrastructure Joining forces for nature, people and the economy Joint declaration of Alpine States and Regions Munich, October 2, 2017 The project is co-financed by the European Regional
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 17892-8 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test Reconnaissance et essais
More informationWELCOME TO THE CHOUTEAU GREENWAY ECONOMIC DEVELOPMENT WORKING GROUP!
WELCOME TO THE CHOUTEAU GREENWAY ECONOMIC DEVELOPMENT WORKING GROUP! Chouteau Greenway Steering Committee and Working Groups Overview Overview January 9, 2019 Chouteau Greenway will transform St. Louis
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62267-2 Edition 1.0 2011-03 Railway applications Automated urban guided transport (AUGT) Safety requirements Part 2: Hazard analysis at top system level INTERNATIONAL ELECTROTECHNICAL
More informationThe potential of labelling in landscape management
The potential of labelling in landscape management Dr. Carsten Mann Green Week, 31 May 2016, Brussels, Belgium Source: www.spainisdelicious.com 2 Outline 1. Background information Rural landscape and new
More informationOptoelectronics Industry and Technology Development Association
Optoelectronics Industry and Technology Development Association Optoelectronics Industry and Technology Optoelectronics industry and technology have created new added values in various industrial fields
More informationInternational and European standardization of Nanomaterials
International and European standardization of Nanomaterials Jean-Marc Aublant LNE - France What about standardization of nanotechnologies? Retrospect CEN/BT/WG 166 Nanotechnologies was established in March
More informationIEC DLMS/COSEM seminar. Overview
IEC 62056 DLMS/COSEM seminar Overview EUW 2014, Amsterdam Győző Kmethy, DLMS UA, President Victoria Varjú, DLMS UA, Support manager Bas Roelofsen, DNV GL, Consultant 1 Agenda 13:00 Registration 13:30 DLMS/COSEM
More informationSTANDARDIZATION A FRAME PROGRESS FOR EVERYONE
STANDARDIZATION A FRAME PROGRESS FOR EVERYONE EUROPEAN STANDARDIZATION IN NANOTECHNOLOGIES AND RELATION WITH INTERNATIONAL WORK. HOW STANDARDIZATION CAN HELP INDUSTRY AND REGULATORS IN DEVELOPING SAFE
More informationCEN/TC 442 WG4 TG2 Product Data Templates. based on CEN/CENELEC standards, stored in a European data dictionary framework
CEN/TC 442 WG4 TG2 Product Data Templates based on CEN/CENELEC standards, stored in a European data dictionary framework Lars Chr. Fredenlund, - CEO, cobuilder - Member buildingsmart International Product
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14688-1:2003 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description Geotechnical investigation and testing
More informationEN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)
ÖNORM EN ISO 9001 Edition: 2009-08-15 Quality management systems Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version) Qualitätsmanagementsysteme Anforderungen (ISO 9001:2008 + Cor.1:2009) (konsolidierte
More informationGI Standardization Overview
Second workshop on the use of GIS/OGC standards in meteorology GI Standardization Overview 1 nicolas.lesage@ign.fr 12 Janvier 2009 Modèle TN-02.018-1.1 The goal of standardization According to decree number
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationEress Forum 2018 Workshop 2: The Future of Energy Metering Data. Data security basics
Eress Forum 2018 Workshop 2: The Future of Energy Metering Data Data security basics Standardisation Regulation IEC TC65 IEC 62443-x-x is a horizontal standard Railway Perspective - Overview related committees
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationIEC Ed. 1.0 B:2004, Electrical Relays - Part 26: Electromagnetic Compatibility Requirements For Measuring Relays And Protection Equipment By
IEC 60255-26 Ed. 1.0 B:2004, Electrical Relays - Part 26: Electromagnetic Compatibility Requirements For Measuring Relays And Protection Equipment By IEC TC/SC 95 If you are looking for a book by IEC TC/SC
More informationJOINT DECLARATION BETWEEN THE EUROPEAN UNION AND THE REPUBLIC OF INDIA ON A PARTNERSHIP FOR SMART & SUSTAINABLE URBANISATION. New Delhi, 6 Oct 2017
JOINT DECLARATION BETWEEN THE EUROPEAN UNION AND THE REPUBLIC OF INDIA ON A PARTNERSHIP FOR SMART & SUSTAINABLE URBANISATION New Delhi, 6 Oct 2017 The Republic of India and the European Union, CONSIDERING
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3864-4 First edition 2011-03-15 Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials Symboles graphiques
More informationECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms
ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms ECB S R11 Content 1 Preamble... 2 2 Scope and purpose... 2 3 Normative
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests
TECHNICAL SPECIFICATION ISO/TS 17892-10 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests Reconnaissance et essais géotechniques Essais
More informationISO 19011:2011, Guidelines For Auditing Management Systems By ISO/TC 176/SC 3 READ ONLINE
ISO 19011:2011, Guidelines For Auditing Management Systems By ISO/TC 176/SC 3 READ ONLINE If searching for the ebook ISO 19011:2011, Guidelines for auditing management systems by ISO/TC 176/SC 3 in pdf
More informationUrban Improvement Districts The Hamburg Experience
Urban Improvement Districts The Hamburg Experience Dipl. Ing. Stefan Kreutz HafenCity Universität Hamburg Research Associate at the Department of Urban Planning Outline of the presentation 1. Brief history
More informationISO/TS TECHNICAL SPECIFICATION
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance
More informationSTRATEGY PLAN ISO/TC 34/SC 17 Management systems for food safety
STRATEGY PLAN 2013-2017 ISO/TC 34/SC 17 Management systems for food safety STRATEGY PLAN 2013-2017 ISO/TC 34/SC 17 Management systems for food safety Content Background...5 Scope and work of ISO/TC 34/SC
More informationINDIA Biodiversity Conservation and Rural Livelihood Improvement Project
INDIA Biodiversity Conservation and Rural Livelihood Improvement Project Indigenous Peoples Planning Framework INDIA BIODIVERSITY CONSERVATION AND RURAL LIVELIHOOD IMPROVEMENT PROJECT Indigenous Peoples
More informationINTERNATIONAL STANDARD
IEC 61073-1 INTERNATIONAL STANDARD Edition 4.0 2009-01 Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationNew EN Standard for Water meters Challenges for the market. Metering Europe 2005, Barçelona (E), September 2005
New EN Standard for Water meters Challenges for the market Metering Europe 2005, Barçelona (E), 20-22 September 2005 Presentation Introduction Context Standard for water meters Content EN 14154 Challenges
More informationType 5 Certifications:
: What are they and how do you use them for compliance? Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Contents... 1 Introduction... 1
More informationTECHNICAL REPORT IEC TR 62987
TECHNICAL REPORT IEC TR 62987 Edition 1.0 2015-09 colour inside Nuclear power plants Instrumentation and control systems important to safety Use of Failure Mode and Effects Analysis (FMEA) and related
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationISO 9001:2015 TRANSITIONS
Copyright 2015 MAS Solutions LLC. All Rights Reserved. 1 ISO 9001:2015 TRANSITIONS Transition Strategies Copyright 2015 MAS Solutions LLC. All Rights Reserved. 2 TRANSITION STRATEGIES Andy Warhol, Butterfly,
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins de terrassement Champ de visibilité
More informationISO INTERNATIONAL STANDARD. Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
INTERNATIONAL STANDARD ISO 10817-1 First edition 1998-12-15 Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration Systèmes de mesure des vibrations des arbres
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins
More informationBuilding Blocks for Sustainable Communities Technical Assistance Flood Resilience for Riverine and Coastal Communities
Building Blocks for Sustainable Communities Technical Assistance Flood Resilience for Riverine and Coastal Communities Silver Jackets Webinar April 2018 EPA Office of Sustainable Communities Today s Webinar
More informationISO 11399:1995, Ergonomics Of The Thermal Environment - Principles And Application Of Relevant International Standards By ISO TC 159/SC 5/WG 1
ISO 11399:1995, Ergonomics Of The Thermal Environment - Principles And Application Of Relevant International Standards By ISO TC 159/SC 5/WG 1 If searched for the ebook by ISO TC 159/SC 5/WG 1 ISO 11399:1995,
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
More informationThis is a preview - click here to buy the full publication
IEC TR 80001-2-8 TECHNICAL REPORT Edition 1.0 2016-05 Application of risk management for IT-networks incorporating medical devices Part 2-8: Application guidance Guidance on standards for establishing
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7005-1 Second edition 2011-07-15 Pipe flanges Part 1: Steel flanges for industrial and general service piping systems Brides de tuyauteries Partie 1: Brides en acier pour systèmes
More informationEnvironmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers
IEC 60068-3-6 Edition 2.0 2018-01 REDLINE VERSION colour inside Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers INTERNATIONAL
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationPart 3: Reference test blocks
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3452-3 Second edition 2013-11-15 Non-destructive testing Penetrant testing Part 3: Reference test blocks Essais non destructifs Examen par ressuage
More informationPresent and Future of the Eurocodes
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy Present and Future of the Eurocodes Gerhard Breitschaft Vice-Chairman CEN/TC 250 Agenda 1. Introduction 2. Present
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11551 Second edition 2003-12-01 Optics and optical instruments Lasers and laser-related equipment Test method for absorptance of optical laser components Optique et instruments
More informationSustainable building in Baden-Württemberg Innovative technologies, exceptional planning expertise, international construction projects
Sustainable building in Baden-Württemberg Innovative technologies, exceptional planning expertise, international construction projects Baden-Württemberg is a leading location for urban development Facts
More informationPlan Overview. Manhattan Area 2035 Reflections and Progress. Chapter 1: Introduction. Background
Plan Overview The Manhattan Urban Area Comprehensive Plan (the Comprehensive Plan) is a joint planning initiative of the City of Manhattan, Pottawatomie County, and Riley County. The 2014 Comprehensive
More informationThe EU Vision - Sustainable Urban Mobility Plans in the EU strategy
The EU Vision - Sustainable Urban Mobility Plans in the EU strategy Siegfried Rupprecht, Rupprecht Consult 2 nd Italian Technical Workshop on Sustainable Urban Mobility Plans Milano, 26 Nov 2012 Photos:
More informationA new model for CEN/TC 89 Thermal performance of buildings and building components
Project CEN M/48 phase 2, Revision standards for EPBD CEN/TC 89 and ISO/TC 163/SC 2 Energy and thermal performance of building and building components CEN standards for the energy performance of buildings.
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More information