European Standardization for the Natural Gas Infrastructure
|
|
|
- Dana Tucker
- 5 years ago
- Views:
Transcription
1 European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009
2 Content The standards framework Benefits of Participation in standardization CEN/TC234: Technical Committee on the European Natural Gas Infrastructure
3 Standardizations Bodies - relationships R e c o g n i i s e d International ISO / IEC Vienna Agreement Regional National CS Canada GOST Russia + GUS ANSI USA CEN / CENELEC AS Australia ARSO Africa BSI DIN NF NEN ON SN UNE UNI.. (30) Liaison with ISO Liaison with CEN Industry API ASME OGP MARCOGAZ Companies OPERATORS CONTRACTORS SUPPLIERS MANUFACTURERS
4 A functional standard in the gas industry describes... Related to Safety Management: Design Choice of materials by product standards Construction Testing and commissioning Integrity Related to Integrity Management: Operation and maintenance Safeguarding external interference Aiming at the Safety and Reliablity of the gas infrastructure
5 Content The standards framework Benefits of Participation in standardization CEN/TC234: Technical Committee on the European Natural Gas Infrastructure
6 External standards as a strategic tool To demonstrate the Self responsibility attitude of the European gas transmission companies Improving the inter-operability of the gas transmission networks To demonstrate the installation is designed and constructed based on widely accepted functional and safety requirements and best practices With respect to Safety Management the use of external standards as a basis for the internal standardization and technical specifications is evident
7 Benefits from participation in the development of standards Gaining recognition as a knowledge centre on gas infrastructure technology and standardization Strengthening the value and impact of self-responsibility Being first informed about new technologies and developments Increasing knowledge for your own experts by networking Influencing the quality and level of safety of the standard for the company s / national benefit Preventing damage caused by new or additional requirements
8 Standardization leads to: Reduction of project costs Less complexity Less time needed for the design and construction Reduction of maintenance costs Improved manageability Less spare parts in stock Familiar with techniques and components -> less education and training Safety Reducing HSE risks Efficiency A shorter project turnaround Reliability Proven technology Predictable Reproducible
9 Content The standards framework Benefits of Participation in standardization CEN/TC234: Technical Committee on the European Natural Gas Infrastructure
10 CEN/TC234 Infrastructure Organization chart CEN/TC234 Gas Infrastructure CEN/CR WG 1 INSTALLATION PIPEWORK IN BUILDINGS MOP < 5 bar EN 1775 WG 6 PRESSURE REGULATION EN12186; EN WG 2 PIPELINES MOP < 16 bar EN ; EN 12327; TS WG 7 COMPRESSOR STATIONS EN WG 3 PIPELINES MOP > 16 bar EN 1594; EN 12732; TS 15173; TS WG 8 INDUSTRIAL INSTALLATION PIPEWORK > 0,5 bar EN WG 4 UNDERGROUND GAS STORAGE EN WG 9 INJECTION OF NON- CONVENTIONAL GASES INTO GAS NETWORKS WG 5 GAS METERING EN 1776 WG 10 9 INJECTION SERVICE OF NON- LINES CONVENTIONAL GASES INTO GAS NETWORKS
11 European gas infrastructure standards CEN/TC234 Work programme
12 CEN/TC 234 Infrastructure - Goals Provide a safe and reliable gas transmission and delivery Establishment of the technical safety criteria needed to realise a safe interoperability of network respecting the requirements of objectivitiy and non-discrimination Focus on the technical self-responsibility of the gas sector in Europe by setting the necessary technical safety standards in line with the EC goals in the Gas Directive 2003/55/EC
13 CEN/TC234 WG3 liaisons CEN/TC12 Material & equipment Oil & Gas ISO/TC67 SC2 Transportation systems ISO/TC67 SC2 WG8, WG13, WG16 ECISS/TC29 SC2 Line pipes TC234 WG3 Transmission pipelines ISO/TC67 SC4 drilling & production CEN/TC219 Cathodic Protection CEN/TC121 Welding
14 I ve tried to convince you that participation to standardization work is of real benefit for your company and for yourself Thank you for your attention
The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar
The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in
Security Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
Role of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop
Application of DVGW Technical Rules in relation with European Standards
in relation with European Standards INOGATE Study Visit, 9 th to 11 th of May 2014 Dipl.-Ing. Detlef Jagodzinski, DVGW, Bonn Product Standardisation Standardisation committee Gastechnology (NAGas) of DIN.
Technical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
ISO/TC 30 Standards. Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI
Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI Slide 1 Benefits of standards Contributed to about 13 per cent of the growth in labour productivity in the UK over 1948-2002,
BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
ISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
EU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
CEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
Standards for ITS, the perspective of CEN/TC278
Standards for ITS, the perspective of CEN/TC278 Henk Stoelhorst Chairman CEN/TC278 10 FEB 2010 Presentation content ITS standards Why do we need ITS standards The standards bodies CEN/TC278: ITS standards
BUSINESS PLAN. CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY Business Environment Protection of people and property in a society that is confronted with criminal and terrorist dangers
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
Experience of PJSC UKRTRANSGAZ in the implementation of International and European Standards in Ukraine under the INOGATE project
Experience of PJSC UKRTRANSGAZ in the implementation of International and European Standards in Ukraine under the INOGATE project Roman SHYMKO Director of the Department of Underground Gas Storage Public
BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
Dutch hydrocarbon sector and standardization activities
Dutch hydrocarbon sector and standardization activities 1 Outline Organization of NEN Overview of oil and gas standardization and standards Organization of national mirror committees Challenges in involving
Cooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
CEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS 2017-12-08 ØIVIND ROOTH, CHAIR CEN/TC442 11.12.2017 2 What is BIM? BIM - Building Information Modelling Is an industry
BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC
BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
Interoperability from the perspective of standards
Interoperability from the perspective of standards Alina IATAN CEN and CENELEC General considerations about European Standrads CEN and CENELEC 2018 2 Facts and figures about CEN and CENELEC 465 CEN/CLC
CEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
CEN/TC 391 Business Plan Revision Nov 2010 Page 1 EXECUTIVE SUMMARY
Page 1 EXECUTIVE SUMMARY Business Environment A wide range of threats and hazards can result in destabilising or disruptive events and escalate towards unpredictable and large scale consequences for Societal
On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT Business environment EXECUTIVE SUMMARY The following European Council New Approach directive and regulation are relevant to the work
The European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles
ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
New EN Standard for Water meters Challenges for the market. Metering Europe 2005, Barçelona (E), September 2005
New EN Standard for Water meters Challenges for the market Metering Europe 2005, Barçelona (E), 20-22 September 2005 Presentation Introduction Context Standard for water meters Content EN 14154 Challenges
ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman AEA (Agricultural Engineers Association) (Established 1875) Trade Association (member companies) Economic, Export, Legal,
A new model for CEN/TC 89 Thermal performance of buildings and building components
Project CEN M/48 phase 2, Revision standards for EPBD CEN/TC 89 and ISO/TC 163/SC 2 Energy and thermal performance of building and building components CEN standards for the energy performance of buildings.
BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
Confused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
ISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:
ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date
ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
BUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
CEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
CEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)
ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
CEN/TC 186 ISO/TC 244
SAFETY & STANDARDS Industrial Thermoprocessing Equipment (IThE) CEN/TC 186 ISO/TC 244 IEC/TC 27 Standardisation for IThE in Europe Basis of European Standardization on Machinery and Thermoprocessing Equipment
BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9311-2 Second edition 2011-08-15 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Adhésifs pour réseaux de tuyauteries
CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
International standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints
INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies
ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail
INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)
BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
EU Standardization & EU Service Standardization
EU Standardization & EU Service Standardization Dr. Betty Xu Seconded European Standardization Expert in China (SESEC) 7 th Sept 2015 EU Standardization & EU Service Standardization Content Table 1. SESEC
BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
Relevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
Standardisation activities in the field of HMI for road vehicles
International Telecommunication Union Standardisation activities in the field of HMI for road vehicles Dr. Christhard Gelau Bundesanstalt für Straßenwesen/Federal Highway Research Institute (BASt) Department
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
STANDARDISATION OF SRF (ISO/TC 300)
STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF
This document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16705 April 2014 ICS 13.310 English Version Perimeter protection - Performance classification methodology Protection périmétrique - Méthode
CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved
CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee
TC 34 prepares International Standards for lamps and other related equipment.
IEC/TC or SC 34 SMB/4650/SBP STRATEGIC BUSINESS PLAN (SBP) Secretariat Date United Kingdom November 2011 Please ensure this form is annexed to the Report to the Standardization Management Board if it has
WORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
LATEST HYDROCARBON-BASED REFRIGERATION TRENDS
LATEST HYDROCARBON-BASED REFRIGERATION TRENDS René van Gerwen, ENTROPY Cooling Solutions - Tour around the Globe - Regulations, Codes, Standards & Guidelines - Skills, Training & Certification - Conclusions
BSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY The term Geosynthetics includes the product categories of (1) geotextiles and geotextile related products and (2) geosynthetic barriers,
BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
INTERNATIONAL COOPERATION IN STANDARDIZATION
EU-Russia cooperation on standardisation for construction Moscow, 9-10 October 2008 1 EU-Russia cooperation on standardization for construction INTERNATIONAL COOPERATION IN STANDARDIZATION Amilcar da Costa
Eress Forum 2018 Workshop 2: The Future of Energy Metering Data. Data security basics
Eress Forum 2018 Workshop 2: The Future of Energy Metering Data Data security basics Standardisation Regulation IEC TC65 IEC 62443-x-x is a horizontal standard Railway Perspective - Overview related committees
BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
Road Map and Action Plan for Ukraine on harmonisation of standards and codes in electricity and gas sectors
Road Map and Action Plan for Ukraine on harmonisation of standards and codes in electricity and gas sectors INOGATE Technical Secretariat and Integrated Programme in Support of the Baku Initiative and
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. July 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC July 2017 Issued on : 4 August 2017 Page 1 Information Procedure on Standards Notifications registered
European Standards: Supporting the European Single Market for Services
2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,
ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
International Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary
International Standards Health Informatics Audrey Dickerson, RN, MS ISO/TC 215 Secretary Objectives To appreciate the global role of standards in our lives To understand the role of international HIT standards
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2018 Issued on : 7 March 2018 Page 1 Information Procedure on Standards Notifications registered
HazLoc Essential Guides:
HazLoc Essential Guides: Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com +44 1244 882590 www.intertek-hazloc.com Contents Contents... 1 Introduction... 1 Introduction to Ex... 1 ATEX Overview...
BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
CEN TC224 esign activities ETSI Security workshop 2013/01/16. Beatrice PEIRANI, GEMALTO Expert ETSI STF 425, CEN WG16
CEN TC224 esign activities ETSI Security workshop 2013/01/16 Beatrice PEIRANI, GEMALTO Expert ETSI STF 425, CEN WG16 Agenda Introduction EU Mandate M/460 EU regulation on electronic trust services CEN
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9311-3 First edition 2005-03-01 Adhesives for thermoplastic piping systems Part 3: Test method for the determination of resistance to internal pressure Adhésifs pour systèmes
International and European standardization of Nanomaterials
International and European standardization of Nanomaterials Jean-Marc Aublant LNE - France What about standardization of nanotechnologies? Retrospect CEN/BT/WG 166 Nanotechnologies was established in March
ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL
ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL Kian FADAIE Canada Centre for Remote Sensing Natural Resources Canada Fadaie@nrcan.gc.ca Paper number 1734 KEY WORDS: ISO/TC211,