0014-L-16/1 2 March Test report. EPDM Quickgoot system

Transcription

1 0014-L-16/1 2 March 2016 Test report EPDM Quickgoot system

2 0014-L-16/1 2 March 2016 Test report EPDM Quickgoot system 2016 Kiwa N.V. All rights reserved. No part of this report may be reproduced, stored in a database or retrieval system, or published, in any form or in any way, electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher. Kiwa BDA Testing B.V. Avelingen West P.O. Box AJ Gorinchem The Netherlands Tel Fax testing@bda.nl Details Principal Quick Goot B.V. Postbus 123 NL-6573 ZK BEEK-UBBERGEN Contact person F. Creemers frank@quickgoot.nl Date of order 15 January 2016 Project number 0014-L-16/1 Author Subject K. van Zee determination of resistance to peel from a support All assignments accepted by Kiwa BDA Testing B.V. are subject to our general terms and conditions. The report may only be reproduced in full. Commercial register

3 Contents Contents 1 1 Introduction 2 2 Investigation 3 3 Test methods and results 4 I Test specimens after testing 0014-L-16/1 2 March 2016 Kiwa N.V. 1 of 4

4 1 Introduction By order of Quick Goot B.V., Kiwa BDA Testing B.V. has determined the resistance to peel from a support of the self-adhesive EPMD membrane in combination with an aluminium substrate. On 19 January 2016 the samples, provided by Mr F. Creemers of Quick Goot B.V., have been received at Kiwa BDA Testing B.V. for the purpose of testing. On the samples no data were found regarding product name, manufacturer and/or production date/code L-16/1 2 March 2016 Kiwa N.V. 2 of 4

5 2 Investigation The investigation has been performed in coherence with the stipulations mentioned in: EN 13956:2012 Flexible sheets for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics. Dutch KOMO directive BRL :2015 Baanvormige dakbedekkingssystemen, Deel 1 Algemene bepalingen 1. Dutch KOMO directive BRL :2015 Baanvormige dakbedekkingssystemen, Deel 4 Specifieke bepalingen voor kunststof en rubber dakbanen 2. European directive M.O.A.T. No. 66:2001 UEAtc Technical Guide for the assessment of non-reinforced, reinforced and/or backed roof waterproofing systems made of EPDM. The investigation has been performed in the period from week 3 up to and including week 8, Roof waterproofing systems Part 1: General stipulations. 2 Roof waterproofing systems Part 4: Specific stipulations for plastic and rubber roof waterproofing sheets L-16/1 2 March 2016 Kiwa N.V. 3 of 4

6 3 Test methods and results The determination of the resistance to peel from the support has been performed according to the Dutch KOMO directive BRL :2015, 8.3 Bepaling van de pelsterkte vanaf een ondergrond onder een constante hoek van 90º 1. This method also covers the determination according to the European directive M.O.A.T. 66:2001, Resistance to peel from the support, method B (peel strength at an angle of 90 ). On 19 January 2016 the test specimens have been built up by Mr F. Creemers of Quick Goot B.V. in the presence of Mr K. van Zee of Kiwa BDA Testing B.V. The product has been applied on a support of degreased aluminium. The support has been provided by Quick Goot B.V. The test has been performed on the test specimens in initial condition and after 28 days of thermal ageing of the test specimens at 80 C according to EN 1296:2000 Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roofing Method of artificial ageing by long term exposure to elevated temperature. Table 1 Resistance to peel from an aluminium support Peel resistance from the support Test specimen average [N.(50 mm) -1 ] initial after thermal ageing 1 38,2 54,6 2 32,2 50,1 3 30,3 52,3 Mean Standard deviation s (σ (n-1) ) 4 2 Remark: The results are only related to the investigated samples, products and/or systems. Kiwa BDA Testing B.V. is not liable for interpretations or conclusions that are made in consequence of the results obtained. If sampling was not performed by Kiwa BDA Testing B.V., no judgement can be given with regard to the origin and representativity of the samples. Gorinchem, 2 March 2016 The laboratory Kiwa BDA Testing B.V. K. van Zee C.W. van der Meijden MSc manager technical director 1 Determination of the resistance to peel from a support at a constant angle of L-16/1 2 March 2016 Kiwa N.V. 4 of 4

7 I Test specimens after testing Photo 1 Test specimens after initial testing. Photo 2 Test specimens after aged testing L-16/1 Annex I Kiwa N.V. 1 of 1

8