Members Technical Bulletin
|
|
- Brittney Riley
- 5 years ago
- Views:
Transcription
1 Members Technical Bulletin Samuelson House 62 Forder Way Hampton Peterborough PE7 8JB Chief Executive R BAILEY Serving the agricultural, environmental and amenity industries Documents for Action as received in the Technical Department August 2018 The Standards related documents are listed in four sections: Section 1: Outdoor Power Equipment Committee Documents. Section 2: Agricultural Equipment Committee Documents. Section 3: General Interest Committee Documents. Section 4: New and Revised Standards. All other references, reports etc are listed under their respective group headings. Copyright law does not permit the copying of final standards, but these may be viewed at our offices. Alternatively the AEA is able to offer Standards for members to purchase at substantially discounted rates. Please ask the Technical Department for a quote and delivery schedule on related BSI products. If members wish to obtain copies of any of the other documents listed in this bulletin, please apply to the Technical Department of the AEA; document size may limit our service to a loan. Please quote the date of the bulletin and the item number shown in the first column. DISCUSSION DOCUMENTS are controlled by BSI for private circulation to Committee Members only. The AEA has a BSI mandate to forward such documentation to its members when relevant. If you have an interest in the subject matter please ask for a copy and make your comments to the Technical Department of the AEA as soon as possible. We will then collate the comments and submit them to the appropriate authority. Registered Office: The Agricultural Engineers Association Samuelson House, Forder Way, Hampton, Peterborough PE7 8JB Registered in England and Wales Registration No Phone: Fax: ceo@aea.uk.com A company limited by guarantee
2 Page 2 of 7 STANDARDS RELATED DOCUMENTS SECTION 1: OUTDOOR POWER EQUIPMENT AGE_29 Forestry machinery 1. BSI Document No AGE_ 29_18_0040 ISO/TC 23/SC 17 Manually portable forest machinery ISO/FDIS 7112 Machinery for forestry Portable brush-cutters and grasstrimmers Vocabulary. CPL_116 Safety of motor-operated electric tools 2. BSI Document No CPL_116_18_0059 Proposal from IEC/TC 116/WG 7 for the second edition of IEC Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 1: General requirements. Revision of requirements related to functional safety and battery charging. 3. BSI Document No CPL_116_18_ BSI Document No CPL_116_18_ /384/NP Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers. EN :2015/prA2 Safety of household and similar appliances Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (PR=67527) noting that the project will not be offered to IEC as it concerns an amendment to a homegrown standard. SECTION 2: AGRICULTURAL EQUIPMENT AGE_6 Agricultural Tractors 5. BSI Document No AGE_ 06_18_0126 ISO/TC 23/SC 4 Tractors N 1179 Report meeting 2018 Florianopolis N 1179 Report meeting 2018 Florianopolis 27 April Includes OECD Presentation. 6. BSI Document No AGE_ 06_18_0141 ISO/TC 23/SC 19 Agricultural electronics ISO Tractors and machinery for agriculture and forestry Serial control and communications data network Part 3: Data link layer.
3 Page 3 of 7 AGE_6_3 High voltage interface and EMC 7. BSI Document No AGE_ 06_3_18_0002 ISO/TC 23/SC 19 Agricultural electronics ISO/CD Agricultural machinery, tractors, and earthmoving machinery Safety of electrical and electronic components and systems operating at 32 to 75 VDC and 21 to 50 VAC. AGE_15 Equipment for crop protection and the application of liquid fertilizer 8. BSI Document No AGE_ 15_18_0033 ISO/TC 23/SC 6 Equipment for crop protection N 1549 ISO N 1549 CIB - NWI Proposal ISO Equipment for crop protection Spraying equipment Part 4: Agitation test method. AGE_32 Agricultural implements and trailers and equipment for harvesting and conservation 9. BSI Document No AGE_ 32_18_0033 CEN/TC 144 Tractors and machinery for agriculture and forestry EN 703 Agricultural machinery Safety Silage loading, mixing and/or chopping and distributing machines. SECTION 3: GENERAL INTEREST B_513_1 Earth moving machinery (International) 10. BSI Document No B_513_1_18_ BSI Document No B_513_1_18_0204 ISO/DIS 5010 Earth-moving machinery Wheeled machines Steering requirements. ISO/FDIS Earth-moving machinery Operator s controls. MCE_3 Safeguarding of machinery 12. BSI Document No MCE_3_18_0184 IEC/TS ED 1 Safety of machinery Safety-related sensors used for protection of person. MHE_7 Industrial trucks 13. BSI Document No MHE_7_18_ BSI Document No MHE_7_18_0200 ISO :2015/DAmd 1 Rough-terrain trucks Safety requirements and verification Part 6: Tilting operator s cabs. ISO Rough-terrain trucks User requirements Part 1: Variable-reach trucks.
4 Page 4 of BSI Document No MHE_7_18_ BSI Document No MHE_7_18_0202 ISO Rough-terrain trucks User requirements Part 2: Slewing variable-reach trucks. ISO/CD 23676:2018 Rough-terrain trucks Operator training. PTI_7 Lubricants and process fluids 17. BSI Document No PTI_7_18_0016 ISO/TC 28/SC 4 Draft Resolution 13/2018 for the revision of ISO 12922:2012 Lubricants, industrial oils and related products (Class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU. NEW AND REVISED STANDARDS 18. BS ISO 8664:2018 Tyres for agricultural tractors and machines Code-designated and service-description marked radial drive-wheel tyres. 19. BS ISO 10625:2018 Equipment for crop protection Sprayer nozzles Colour coding for identification. 20. BS EN 63024:2018 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs-RCCBs for household and similar uses. Technical extracts from DG weekly mail EC Call for papers on sustainable agriculture and innovative equipment development Deadline abstract: This call for papers is part of the conference 3rd Rendezvous Techniques AXEMA. The conference, organised by the European Society of Agricultural Engineers (EurAgEng) and AXEMA, is directly leading up to SIMA 2019 that takes place in Paris February next year. The call is open for all topics related to the innovation of machines and systems for sustainable agriculture by agricultural and non-agricultural specialists. This conference will create an opportunity for exchanges between: R&D players from industry; academics; and Research sectors including non-agriculture specialists. Read more ISO/TC 23/SC 7 Working groups on mowers and harvesters met in Detroit. ISO 5718 series that references blades for agricultural mowers, and new work item ISO large flail mowers progressed well, and it is hoped that the blade series will conclude at the next meeting in Frankfurt in 2018.
5 Page 5 of 7 The large flail mower draft is still some way off but will follow ISO 4254 part 13 and US ANSI/ASABE S 639 standards in many of the technical requirements and criteria. The revision of ISO :1997 Equipment for harvesting, Combines and functional components, Part 1: Vocabulary, into ISO 6689, Equipment for harvesting, Combine harvesters and functional components, Vocabulary, and the Combining ISO :1997 Equipment for harvesting, Combines and functional components, Part 2: Assessment of characteristics and performance, with ISO 8210:1989 Equipment for harvesting, Combine harvesters, Test procedure, to create a new ISO 8210, Equipment for harvesting, Combine harvesters, Test procedure and performance assessment, took place. A new ISO standard for a residue test was noted as a future proposal. ASABE Conference 1769 participants were treated to the opportunity of attending hundreds of technical seminars in Detroit at the 111th edition of the annual conference. Excellent presentations of interest to sprayers, tractors and implements coupled with US standards mirror committees, took place. Many papers and presentations on Unmanned aircraft systems relating to spraying were well received. Sessions included Precision application of chemicals and fertilizers, UAV sensing, imaging, crop material application and field evaluation. Tom Bals (Micron) is the new interim Chair of US MS 23/6/2 Aviation group. Keith Hawken presented an AEA/UK update on standards, legislation and Brexit impact, which was welcomed with keen interest, to the STC 02 International standards group. Dr Kyle Logan, who is working out of the British Consulate in Chicago, but an official BEIS employee, reached out to the AEA in relation to working together on trade within the UK/USA portfolio. Dr Larry Gaultney (DuPont), well known in International sprayer circles, was awarded an ASABE fellowship. Rich Job (ex AGCO) was awarded the President s Citation Award for services to Cab/Air filtration committee work. Prof Bob Gustafson was awarded the Presidents Citation Award for services to the ASABE foundation, which has increased its funding revenue by 65%, raised to over $4 million, in the last 6 years. The AEA were part of the committee that developed a new standard for air quality systems for cabs, which received a 2018 standards development award. The conference theme centred on water security with Margaret Catley-Carlson (VC Canadian water network board) the key note speaker. ASABE in collaboration with the Indian Society of Agricultural Engineers (ISAE), announced a joint conference on global water security for agricultural and natural resources, to be held in Hyderabad, India, October 3-6, New President, Mr Maury V Salz (Claas Omaha Inc), took office replacing Prof. Stephen Searcy (Texas A&M university). AEA (in house) Meetings October 2018 a OPECTC 5 b FECTC 6 c FEC 2 October d Service managers 3 October e CASC 11 October f OPEC 17 October
6 Page 6 of 7 g ATV/SbS 18 October AEA (external) Meetings October 2018 A. B/513/1 4 EMM, BSI, Chiswick B. ATVEA TEC (WebEx) 11 All-Terrain Vehicle Industry C. ISO/TC 23/SC 6/WG 19 (ZOOM) D. ISO/TC 23/SC 3/WG 14 (WebEx) 11 Vocabulary, (ZOOM) 12 Environmental aspects of seeding equipment, (WebEx) E. MCE/14 13 RIC engines, BSI, Chiswick F. ISO/TC 23/SC 13/WG 18 (ZOOM) 13 Material collection, (ZOOM) G. ISO/TC 23/SC 15/WG Thrown object guards Laboratory test and performance requirements, Geesthacht, Germany H. ISO/TC 23/SC 13 (WebEx) 19 Powered lawn and garden equipment, (WebEx) I. ISO/TC 23/WG ISO RMI Use cases, Frankfurt, Germany J. ISO/TC 23/SC 7/WG Agricultural mowers and blades, Frankfurt, Germany K. WGAT 25 Working Group Agricultural Tractors, Brussels L. ATVEA TEC (WebEx) 25 All-Terrain Vehicle Industry M. Tillage-Live 26 The National Cultivation Event, Dunbar, East Lothian, Scotland N. CPL/61 26 Safety of household and similar electrical appliances, BSI, Chiswick O. Orgalime Tech Committee Meeting European Engineering Industries Association, London P. SPISE Standardized Procedure for the Inspection of Sprayers in Europe, Athens, Greece
7 Page 7 of 7 Q. MCE/3 1 October Machinery safety, BSI Chiswick R. OHEEG 4 October SMMT, London S. ATVEA TEC (WebEx) 9 October All-Terrain Vehicle Industry T. ATVEA TEC (WebEx) 14 October All-Terrain Vehicle Industry U. World Standards Day 14 October World Standards Day V. ISO/TC 23/SC October Safety & comfort, Frankfurt, Germany W. ATVEA TEC (WebEx) 23 October All-Terrain Vehicle Industry X. ISO/TC October Internal combustion engines, BSI, Chiswick K J HAWKEN Technical and Standards Director
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman AEA (Agricultural Engineers Association) (Established 1875) Trade Association (member companies) Economic, Export, Legal,
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationBUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
More informationAS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard
AS/NZS 3111:2009 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009 AS/NZS 3111:2009 This joint Australian/New
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationBUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
More informationRubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationHexagon nuts Ð Product grade C
BRITISH STANDARD BS EN ISO 4034:2001 The European Standard EN ISO 4034:2000 has the status of a British Standard ICS 21.060.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Hexagon
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationISO/TC 249 Newsletter
ISO/TC 249 Newsletter Vol. 6 (2014 Christmas Edition) Congratulations to the publications of the first two international standards of ISO/TC249 ISO 17218:2014 Sterile acupuncture needles for single use
More informationBUSINESS PLAN CEN/TC 337. Road operation equipment and products
Page: 1 BUSINESS PLAN CEN/TC 337 Road operation equipment and products EXECUTIVE SUMMARY The main objective of the Technical Committee, CEN/TC 337 founded in 2000 is to prepare European standards on all
More informationTSEI Fall 2011 Meeting. Emergency Products Committee
TSEI Fall 2011 Meeting Agenda Scope/Charter of Committee Update on Applicable SAE Standards Update on Other Relevant Standards Old/New Business Questions and Answers Adjournment Scope Emergency Warning
More informationLatest Developments in Condition Monitoring Standards
Latest Developments in Condition Monitoring Standards Presented by: Simon Mills Chair of BSI GME21/7 Condition monitoring of machines Past Chair ISO TC108/SC5 Condition monitoring of machine systems Member
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationDecember Volume 19 Issue 02
Page - 1 PACIFIC ASIA LIFT AND ESCALATOR ASSOCIATION As we see 2017 coming to a close, and many of our friends and colleagues are planning Christmas, New Year festivities and holidays, we can reflect on
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationRoad vehicles Mopeds Symbols for controls, indicators and tell-tales
BSI Standards Publication Road vehicles Mopeds Symbols for controls, indicators and tell-tales NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH
More informationAS/NZS 3133:2008 AS/NZS
Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationMobile road construction machinery Safety- Part 1: Common requirements. Mobila väganläggningsmaskiner - Säkerhet - Del 1: Allmänna krav
Mobile road construction machinery Safety- Part 1: Common requirements Mobila väganläggningsmaskiner - Säkerhet - Del 1: Allmänna krav The European Standard has the status of a Swedish Standard. This document
More informationAS/NZS 3190:2011 AS/NZS
AS/NZS 3190:2016 Australian/New Zealand Standard Approval and test specification Residual current devices (currentoperated earth-leakage devices) Superseding AS/NZS 3190:2011 AS/NZS 3190:2016 AS/NZS 3190:2016
More informationUsing consumer appliances in Europe the consumer view
Using consumer appliances in Europe the consumer view February 2011 European Association for the Co-ordination of Consumer Representation in Standardisation Av. de Tervueren 32, box 27 B-1040 Brussels,
More informationCE marking of noise barriers and foundations
CE marking of noise barriers and foundations Date 2 June 2014 Case officer Charlotte Sejr E - mail cslp@vd.dk Phone +45 7244 2340 Document 14/10726-2 Page 1/13 1 Table of Contents CE MARKING OF NOISE BARRIERS...
More informationAS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard
AS/NZS 3120:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Approval and test specification Cord extension sockets AS/NZS 3120:2011 AS/NZS 3120:2011 This Joint Australian/New Zealand
More informationAS/NZS :2014
Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements
More informationBUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY Business Environment The European plastics and rubber machinery industry represented in 2015 a total of around 1,000 companies,
More informationAS/NZS IEC :2015
AS/NZS IEC 60947.5.6:2015 (IEC 60947-5-6, Ed. 1.0:1999, IDT) Australian/New Zealand Standard Low-voltage switchgear and Part 5.6: Control circuit devices and switching elements DC interface for proximity
More informationAS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site
Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint
More informationBritish Standards for Machinery Guarding
British Standards for Machinery Guarding The below provides a list of standards that are relevant to machinery safety. Not all standards are applicable in every case, and there are specific 'Type C' standards
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 22868 Second edition 2011-03-01 Forestry and gardening machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy)
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationÍST EN :2015. Gildistaka ICS: 53.06
ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform
More informationISO 5010 INTERNATIONAL STANDARD. Earth-moving machinery Rubber-tyred machines Steering requirements
INTERNATIONAL STANDARD ISO 5010 Third edition 2007-06-01 Earth-moving machinery Rubber-tyred machines Steering requirements Engins de terrassement Engins équipés de pneumatiques Systèmes de direction Reference
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationAS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard
AS/NZS 61386.1:2015 Australian/New Zealand Standard Conduit systems for cable management Part 1: General requirements Superseding AS/NZS 2053.1:2001 AS/NZS 61386.1:2015 AS/NZS 61386.1:2015 This joint Australian/New
More informationASABE and International Standardization: A Decade of Harmonization and Collaboration
ASABE and International Standardization: A Decade of Harmonization and Collaboration 24th Annual Meeting of the Club of Bologna International standards: opportunity or problem November 9-11, 2013 Hannover,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18758-2 First edition 2018-06 Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements Engins d'exploitation minière et de terrassement
More informationAS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009
AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy
More informationElectromagnetic compatibility (EMC)
Electromagnetic compatibility (EMC) Relevant standards for commercial cleaning machines Contents Foreword......................................... 2 Introduction.......................................
More informationCONSUMER INTERESTS IN POSSIBLE ECODESIGN AND ENERGY LABELLING REQUIREMENTS FOR VACUUM CLEANERS
CONSUMER INTERESTS IN POSSIBLE ECODESIGN AND ENERGY LABELLING REQUIREMENTS FOR VACUUM CLEANERS Contact: Sylvia Maurer Sylvia.Maurer@anec.eu environment@beuc.eu Ref.: ANEC-PT-2010-EuP-037final X/040/2010-05/08/10
More informationAustralian Standard. Functional safety Safety instrumented systems for the process industry sector
AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1
More informationCYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop
More informationWhy participate in standardization work?
1 Why participate in standardization work? Morten Seljeskog / Morten.Seljeskog@sintef.no SINTEF Energi AS/SINTEF Energy Research, Kolbjørn Hejesvei 1a, 7465 TRONDHEIM Tel: +47 73 59 37 29 / Cell: +47 901
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods
INTERNATIONAL STANDARD ISO 14401-1 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods Engins de terrassement Champ de visibilité
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationValves Materials for bodies, bonnets and covers
BRITISH STANDARD Valves Materials for bodies, bonnets and covers Part 3: Cast irons specified in European Standards The European Standard EN 1503-3:2000 has the status of a British Standard ICS 23.060.01;
More informationSMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice
SMB/4676/R IEC/TC or SC TC 62 Secretariat Germany STRATEGIC BUSINESS PLAN (SBP) Date 2011-09-23 Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared
More information2019 Media Details. L an d scap e & A menity.
L an d scap e & A menity 2019 Media Details The UK s leading multi-media publication for the landscape, amenity and groundscare sector 02 Landscape & Amenity Media Details 2019 LANDSCAPE & AMENITY PRODUCT
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationCITY OF VAUGHAN EXTRACT FROM COUNCIL MEETING MINUTES OF NOVEMBER 15, 2016
Item 11, Report No. 38, of the Committee of the Whole, which was adopted without amendment by the Council of the City of Vaughan on November 15, 2016. Regional Councillor Di Biase declared an interest
More informationAustralian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.
AS IEC 60942 2004 IEC 60942:2003 AS IEC 60942 Australian Standard Electroacoustics Sound calibrators This Australian Standard was prepared by Committee AV-002, Acoustics Instrumentation and Measurement
More informationStandards Solution. What it is and how to use it. July 2017
Standards Solution What it is and how to use it July 2017 Who is IOGP? IOGP is the International Association of Oil & Gas Producers IOGP works on behalf of the world's oil & gas exploration and production
More informationThe History of IWMA. 18th International Water Mist Conference will (IWMC) take place in London on 19th & 20th September 2018
The History of IWMA IWMA = International Water Mist Association Founded on 4th April 1998 Head office in Hamburg, Germany Annual conferences since 2001 1 The History of IWMA 18th International Water Mist
More informationAustralian/New Zealand Standard
AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New
More information37 th annual conference of the South African Association of Botanists (SAAB) Plants in a changing world. Second Announcement
37 th annual conference of the South African Association of Botanists (SAAB) Plants in a changing world Second Announcement Department of Botany, Rhodes University Monday 17 Wednesday 19 January 2011 The
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationSTANDARDS RELATED MEETING REPORT
STANDARDS RELATED MEETING REPORT REPORT No. : 2285 BY: JP Nhlapo (Standards Writer) and Dr JG Auret (TC31 Mirror Committee chairman): ATTENDANCE AT: IEC TC 31,Subcommittees and WG s CITY: Frankfurt COUNTRY:
More informationWorking Document on a possible COMMISSION DELEGATED REGULATION
Working Document on a possible COMMISSION DELEGATED REGULATION Implementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of vacuum cleaners EN EN Working
More informationFire Performance of external thermal insulation for walls of multistorey buildings
Fire Performance of external thermal insulation for walls of multistorey buildings third edition Sarah Colwell and Tony Baker fire performance of external thermal insulation for walls of multistorey buildings
More informationAS/NZS :2008
AS/NZS 60079.29.2:2008 Australian/New Zealand Standard Explosive atmospheres Part 29.2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.29.2:2008
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationC 271/32 Official Journal of the European Union
C 271/32 Official Journal of the European Union 12.11.2003 Commission communication in the framework of the implementation of the Council Directive 89/336/EEC (2003/C 271/04) (Text with EEA relevance)
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins de terrassement Champ de visibilité
More informationAS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems
Australian/New Zealand Standard Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Superseding AS/NZS 2053.2:2001, AS/NZS 2053.6:2001 and AS/NZS 2053.7:2002 This
More informationCompilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
More informationOptoelectronics Industry and Technology Development Association
Optoelectronics Industry and Technology Development Association Optoelectronics Industry and Technology Optoelectronics industry and technology have created new added values in various industrial fields
More informationAS/NZS :2014
AS/NZS 4024.1601:2014 (EN 953:1997 inc A1:2009, IDT) Australian/New Zealand Standard Safety of machinery Part 1601: Design of controls, interlocks and guarding Guards General requirements for the design
More informationImplementation Guidance for ISO 9001:2008
Document: ISO/TC 176/SC 2/N 836 Our ref Secretariat of ISO/TC 176/SC 2 Date: 15 October 2008 Implementation Guidance for ISO 9001:2008 CONTENTS 1.0 INTRODUCTION 2.0 BACKGROUND ON ISO 9001:2008 REVISION
More informationTesting coated fabrics
BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard
More informationISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding
INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number
More informationLANDSCAPER THE. Media Pack 2017 PUBLISHED EVERY MONTH SINCE Let there be light! THE UK S NUMBER 1 LANDSCAPING INDUSTRY MAGAZINE.
Lighting UK S NUMBER 1 LANDSCAPING INDUSTRY MAGAZINE Let there be light! With a flick of a switch and some strategically placed landscape lights, you can roll back the darkness and really create that outdoor
More informationThe 27 th KIMO International Conference and AGM. Itinerary. Hosted by Malmö Municipality
Itinerary Please note: Registration is essential admittance to the conference events and technical visits will not be possible without registration. Delegates will be able to choose their preferred Technical
More informationAustralian/New Zealand Standard
AS/NZS 1841.1:2007 AS/NZS 1841.1:2007 Australian/New Zealand Standard Portable fire extinguishers Part 1: General requirements AS/NZS 1841.1:2007 This Joint Australian/New Zealand Standard was prepared
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationGUIDANCE GUIDANCE, REFERENCES AND DOCUMENTATION AVAILABLE FOR THOSE CARRYING OUT IN-SERVICE INSPECTION OF LOCAL EXHAUST VENTILATION CONTROL MEASURES.
GUIDANCE GUIDANCE, REFERENCES AND DOCUMENTATION AVAILABLE FOR THOSE CARRYING OUT IN-SERVICE INSPECTION OF LOCAL EXHAUST VENTILATION CONTROL MEASURES. Number: LEVC 02 Prepared by: Approved by: LOCAL EXHAUST
More informationAS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark
AS/NZS 4417.1:2012 Appending New Zealand-only Amendment A Australian/New Zealand Standard Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark Superseding AS/NZS 4417.1:2009
More informationLoss Prevention Standard
Loss Prevention Standard LPS 1500: Issue 2.1 provide compartmentation in buildings This standard defines the requirements for companies installing fire resisting compartment systems approved by LPCB to
More informationWELCOME TO HYDERABAD
WELCOME TO HYDERABAD Dear all With bright prospectus of India becoming one of the three largest Aviation market in the world by 2020 with consequent phenomenal increase in air traffic, all the airports
More informationBehind the scenes of ISO 22301
Behind the scenes of ISO 22301 Stefan Tangen Secretary of ISO/TC 223 Societal security So how does standardization work in practice? Example on cargo security SWEDEN 2001 Safe Swedish rules Stakeholders
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins
More informationAustralian/New Zealand Standard
AS/NZS ISO 21987:2011 ISO 21987:2009 AS/NZS ISO 21987:2011 Australian/New Zealand Standard Ophthalmic optics Mounted spectacle AS/NZS ISO 21987:2011 This Joint Australian/New Zealand Standard was prepared
More informationCouncil of the European Union Brussels, 5 September 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union
Council of the European Union Brussels, 5 September 2017 (OR. en) 11882/17 COVER NOTE From: date of receipt: 4 September 2017 To: No. Cion doc.: Subject: ENV 727 MI 607 AGRI 443 CHIMIE 78 SAN 319 CONSOM
More informationIEC Ed. 1.1 B:2005, Household And Similar Electrical Appliances - Safety - Part 2-96: Particular Requirements For Flexible Sheet Heating
IEC 60335-2-96 Ed. 1.1 B:2005, Household And Similar Electrical Appliances - Safety - Part 2-96: Particular Requirements For Flexible Sheet Heating Elements For Room Heating By IEC TC/SC 61 If searched
More informationAS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas
AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationLicensed Copy: Tom Magee, Howden Power, 14 May 2003, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS EN 1291:1998 Incorporating Amendment No. 1 Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels The European Standard EN 1291:1998, with the incorporation
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationSpring-type straight pins Coiled, light duty
BRITISH STANDARD BS EN ISO 8751:2007 Spring-type straight pins Coiled, light duty The European Standard EN ISO 8751:2007 has the status of a British Standard ICS 21.060.50 BS EN ISO 8751:2007 National
More informationCAC OVERVIEW. CAC Roles and Responsibilities CAC Operations CAC Membership CAC DAC Relations
CAC OVERVIEW CAC Roles and Responsibilities CAC Operations CAC Membership CAC DAC Relations 1 Purpose of This Overview To increase the level of awareness of CAC members so that they know what is expected
More information