LA6 Series Sleek Design. Fully Customizable. Endless Possiblities.

Transcription

1 LA6 LED Tiers 3 3 Tiers 5 5 Tiers Rated Voltage A D 100~240V AC 24V DC T LJ WJ There is no Silver (U) body color selection for the LJ type. 100V - 240V AC type is only available for LA6-5AWJW-RYGC. MountingWiring ody W Off-white U Silver Direct MountTerminal Steel Pole with L-bracketCable Direct MountCable RYG RYGC 3 Tiers 5 Tiers uzzer type with uzzer no uzzer Model LED Tiers Rated Voltage Rated Voltage is 24V DC Mounting T S ody W Off-white Direct Mount Stationary with Clear switch Extension Function PoE Supported uzzer type with uzzer Signal Tower LA6 Series Sleek Design. Fully Customizable. Endless Possiblities. Model LA6 Rated Voltage Operating Voltage Range 24V DC V AC (50Hz60Hz) 24V DC ±10%90-250V AC (50Hz60Hz) 24V DC48V DC (PoE) 24V DC±10%36-57V DC (PoE) LA6-5D -RYGC 5W LA6-5D -RYGC 6.5W Standard LA6-3D -RYG 3.5W LA6-3D -RYG 4.5W 7.2W (24V DC)8.6W (PoE) Rated Power LA6-5AWJW-RYGC 6.5W Consumption LA6-5D -YYYYY 7W LA6-5D -YYYYY 8W Maximum LA6-3D -YYY 4.5W LA6-3D -YYY 5.5W.9W (26.4V DC).5W (PoE) LA6-5AWJW-YYYYY 7.5W Signal Line Current Max.70mA (at 24V DC)Max.20mA (at AC V) Max. 420mA (at 26.4V DC)10mA (for PoE) Operating Temperature Range -25 to to +50 Operating Humidity Range Less than 90% RH, no condensation Less than 90% RH, no freezing or condensation Mounting Direction UprightInverted Upright Protection Rating IP65 with uzzer IP54 (IEC 60529) IP54 Stationary type IP20 IEC Environmental Conditions Tested while mounted in the upright position Mounting Location Indoors Only Insulation Resistance More than 1MΩ at 500V DC between the power input lead and chassis. Withstand Voltage (500V AC at 24V DC1500V AC at V AC) for 1 minute between terminals and chassis without breaking insulation. Display Variations Signal Mode: 9 colorssmart Mode: 21 colors uzzer Sounds 11 Sounds Sound Level Maximum 85d Environmental Conditions uzzer Sound o.1, in an upright position with a distance from uzzer opening at 1meter Operation Method Signal Control SignalCommand Control Standard Compliances 24V DC EMC Directive (E , E ), RoHS Directive (E 50581), UL508, CSA-C22.2 o. 14, FCC Part 15, Subpart Class A, KC (K , K ) V AC EMC Directive (E , E ), RoHS Directive (E 50581), Low-voltage Directive (IECE , E 62471) EMC Directive (E , E , E55032 Class A, E 55024, RoHS Directive (E 50581), FCC Part 15, Subpart Class A, KC (K , K ), UL , CACSA-C22.2 o. UL , Recognized Component (File o. E480103), * The 24V DC Direct Mount type conforms to the following conformities: UL508, CACSA C22.2 o. 14 Recognized Component (File o. E215660) Cycle Time Level Meter Status Condition Model Tiers Voltage ody Model Tiers Voltage ody LA6-3DTW-RYG Direct MountTerminaluzzer LA6-5DTW-RYGC Direct MountCableuzzer LA6-3DTW-RYG LA6-3DWJW-RYG LA6-3DWJW-RYG LA6-3DTU-RYG LA6-3DTU-RYG LA6-3DWJU-RYG LA6-3DWJU-RYG LA6-3DLJW-RYG LA6-3DLJW-RYG 3 Tiers 24V DC Silver Off-white Direct MountTerminalo uzzer Direct MountCableuzzer Direct MountCableo uzzer Direct MountTerminaluzzer Direct MountTerminalo uzzer Direct MountCableuzzer Direct MountCableo uzzer L-racket with PoleCableuzzer L-racket with PoleCableo uzzer LA6-5DTW-RYGC LA6-5DWJW-RYGC LA6-5DWJW-RYGC LA6-5DTU-RYGC LA6-5DTU-RYGC LA6-5DWJU-RYGC LA6-5DWJU-RYGC LA6-5DLJW-RYGC LA6-5DLJW-RYGC LA6-5AWJW-RYGC 5 Tiers 24V DC V AC Off-white Silver Off-white Direct MountCableo uzzer Direct MountTerminaluzzer Direct MountTerminalo uzzer Direct MountTerminaluzzer Direct MountTerminalo uzzer Direct MountCableuzzer Direct MountCableo uzzer L-racket with PoleCableuzzer L-racket with PoleCableo uzzer Direct MountCableuzzer (for Power over Ethernet) 4-1-3, Kyutaromachi, Chuo-ku, Osaka Japan TEL FAX overseas@patlite.co.jp S. Western Ave. Torrance, CA 90501, U.S.A. TEL FAX sales@patlite.com o.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore TEL FAX sales@patlite.com.sg Room , o.55, Lane 777, Guangzhong Road (West), ZhabeiDistrict, Shanghai, China TEL FAX sales@patlite.cn Am Soeldnermoos 8, D Hallbergmoos, Germany TEL FAX info@patlite.eu LA6-5DTW-POE LA6-5DSW-POE A2603, Daesung, D-POLIS, 606, Seobusaet-gil, Geumcheon-gu, Seoul, 08504, Korea TEL FAX sales@patlite.co.kr 7F. o. 91, Huayin St, Datong District Taipei, Taiwan R.O.C TEL FAX info@patlite.tw 24V DC or PoE (48V DC) Olympia Thai Tower, 15th Floor 444 Ratchadapisek Road Samsennok, Huay Kwang angkok 10310, Thailand TEL FAX sales@patlite.co.th Direct MountTerminalEthernetuzzer StationaryTerminalEthernetuzzer Ethernet PoE (Power over Ethernet) for single cable installation O-AG06A E 1710 A

2 A SIGAL TOWER DESIGED TO SHOW MORE SO YOU CA DO MORE COMMO O-SITE OCCURRECES LA6 SOLUTIO OUR PROCESSES HAVE CHAGED. We now need to reconfigure the color modules on our Signal Towers. Change The LA6 doesn t require any hardware or wiring changes to reconfigure colors. The LA6 can be easily programmed anywhere without tools. OUR MACHIE LIE IS EXPERIECIG TOO MAY STOPPAGES. We need to make our workers better aware of machine status, so they can take quicker corrective measures. Cycle Time The LA6 is able to create better, more dynamic visual signals to elicit a quicker response by workers. WE ARE EXPERIECIG DOW TIME DUE TO MATERIAL MAAGEMET. We need earlier notifications prior to materials completely depleting to avoid delays. Level Meter The LA6 can be programmed to act as a visual level meter to help manage materials and material levels. PRODUCTIO STOPPAGES ARE OCCURRIG AS A RESULT OF UEVE WORKFLOW. Variations in work output is creating bottlenecks that can be smoothed out with a Takt system. Status Condition The LA6 has an internal timer function, allowing you to create visual timers for a streamlined Takt system. WE EED TO IMPLEMET REMOTE MOITORIG TO MIIMIZE OUR LAOR COSTS. We need to monitor the operating status of equipment with long processing time, as well as abnormal stoppages or delays as they occur. The LA6 is able to send information to other LA6 devices in remote locations via its mirroring function. 1 2

3 ADVACED OPTIOS TO SOLVE AY APPLICATIO Change IMPROVE VISIILITY WITHOUT RECOFIGURIG HARDWARE Level Meter REDUCE DOWTIME WITH LEVEL MOITORIG y programming the LA6 to a single, all-tier color arrangement, the equipment status can now be seen at a greater distance, improving awareness and response time. Display up to21 different colors for different equipment statuses Operational Attention Emergency Tank Low y displaying current material levels, workers can more accurately respond to changes, reducing downtime. As material levels reach certain thresholds, the LA6 can provide earlier visual and audible notifications. Display Remaining tank levels in stages Tank Full Midpoint Tank Low Status Condition ICREASE EFFICIECY WITH MORE DYAMIC VISUAL WARIGS WIRIG MADE EASY WITH LA COECTIVITY Ethernet PoE The LA6 is able to display more detailed The LA6 conveniently integrates into your reakdown information, such as the status severity level, or specific abnormality conditions, that workers normally would have to look Socket Transmission facilities existing LA infrastructure. y connecting to a PoE (Power over Internet) compliant HU, the LA6 can be controlled for on an equipment panel or HMI. and powered through a single cable. PC ModbusTCP Display the level of status severity Minor Error reakdown Emergency PLC 3 4

4 REDUCE OTTLEECKS WITH A VISUAL TAKT SYSTEM Cycle Time Cycle Time PROLEM Idle time or delays on the production assembly line is sometimes caused by variations in the rate of worker output. PROLEM Due to high volumes of products to inspect, some defective products may be overlooked and pass inspection. IMPLEMETATIO MERIT With the LA6 visual Takt system, workers will be more aware of the progress of the entire line, minimizing delays, and resulting in a smoother work flow. IMPLEMETATIO MERIT With the LA6 internal timer function, inspectors are allotted proper time for each inspection, resulting in an improved yield rate by accurately detecting inferior goods. 100 sec. Takt Time 100 sec. 50 sec. Operation Complete 0 sec. 10 sec. late Time up Over 30 sec. late Overdue Switch O Start Counting by the minute Inspection Time = 5 minutes Finish Inspection Cart Lock Release utton Switch O Send it to the next process by unlocking it. As new carts arrive, the LA6 restarts the cycle time. Cart Lock Cart Lock Process Flow alance the assembly line with a Takt system Sensors detect inspectors as they enter the process line, triggering the LA6 to begin the count and the inspectors carry out inspection until the LA6 turns all blue. Prevent defective product outflow during inspection 5 6

5 OTAI EQUIPMET IFORMATIO FROM REMOTE LOCATIOS PROLEM PROLEM Tanks located in remote buildings tend to be overlooked until the tanks are completely depleted. Managers in remote offices need to monitor machinery statuses on the factory floor in real-time. IMPLEMETATIO MERIT IMPLEMETATIO MERIT The LA6 can be used as an economical level meter system, capable of alerting remote personnel of equipment changes in real-time. Outdoor uilding 1 (Unmanned) Ethernet PoE With the s built-in mirroring function, equipment status, Takt time, etc., can be communicated to other devices in remote locations via a LA connection. This data can also be sent to a third-party software through the LA connection for data analysis or Andon monitoring. Factory Administration uilding Interface Converter Administration uilding g1 Tank in uildin n! needs attentio Internet LA LA Command Control ox (PLC) Up to 8 remote Locations Analog output for every liquid level sensor threshold. Liquid Sensors Outdoor Pump Visual representation of gradually changing tank fluid levels. 1. The signal is sent from the, located on the equipment to indicate the status. uzzer uzzer Quicker response with remote monitoring 7 uzzer 2. devices located in remote offices mirror, or reflect the status of the in the factory. See equipment status from multiple locations 8

6 LA6 SIGAL TOWER LA6 24V DC 3 and 5 Tier s LA V AC 5 Tier s The LA6 alarm features a total of 11 sounds to match various applications. Voltage: 24V DC Direct MountTerminal (T) Steel Pole with L-bracketCable (LJ) Voltage: V AC Direct MountCable (LJ) 24V DC 85d (at 1m) V AC uzzer 11 Sound Multi-function Switch for various setups UZZER SOUD SETUP The built-in switch has four selectable settings for "Loud" (about 85d) -> "Middle" (about 80d) -> "Low" (about 75d) -> "Off". A new lens design optimizes visibility. The newly developed lens design efficiently diffuses LED light so that it is unmistakably visible, even from great distances. Off-white Silver uzzer Lighting Steel Pole (L J) Off-white uzzer IP65 Φ60 Alarm : IP54 COLOR SETUP The built-in switch can also allow a manual selection of 9 colors to be set for each tier. Direct Mount Stationary type PoE 85d (at 1m) uzzer 11 Sounds Ethernet Modbus TCP EASY WE Setup Sound EW 24V DC 48V DC (PoE) HTTP IPUTS IP54 Φ60 Direct Mount PS Command Diffusion & Water Resistance The alarm has a total of 11 sounds to match various applications. A newly developed compact loudspeaker not only can transmit a clear sound of 85 d (at 1m), but also has added water resistance. A different alarm sound can be set up with each display pattern when in the Smart mode. (Only three of the 11 alarm patterns are selectable in the Signal Tower mode) Use the free editing software to freely change the LA6 colors and patterns. Upload colors and patterns to the signal tower via a US cable.* * The US cable is sold separately (US micro type with Charging Data Transfer capability). y using a PS Command, the LED unit colors for tiers 1-5 can be controlled. HTTP Command Access and control all functions remotely in various network environments with this flexible protocol. Modbus TCP PC PLC Detachable Terminal lock Direct Mount type Stationary with "Clear" switch 3rd Party Software: can send machine status data over Ethernet to centralized software for remote Andon monitoring or data analysis. Conveniently connects to an existing network with PoE support. Has eight inputs available for connecting a PLC, or discrete IO. Data through these inputs can be transferred to a server over the Ethernet. DC power can also be wired if a Poe supporting LA is not available. Ethernet PoE LA6 Optional Parts For LA6 For LA6 For PoE (Power over Ethernet) is a technology which lets network cables carry electrical power. PoE can bring many advantages, such as reducing costs of installing electrical cabling, by connecting it with a HU supporting PoE, or have the flexibility of not having to be tethered to an electical outlet. Stationary racket: (Magnetic Mount) Model: SZW-060W Direct Mount type Wall Mount racket: Model: Stationary type 9 10 Stationary racket: SZK-003W Direct Mount type Mounting Pole with L-racket: SZ-70L Circular racket: SZ-010 Circular racket: SZ-0A

7 Editing Software Free Simple program software! Download and easily set up PATLITE's exclusive editing software. Easy Setup LA6 SERIES Smart Mode 1. Time-trigger 21 Elapsed Time Countdown Cycle Time Setup timing in pattern changes with the editing software. Setups for the individual group operation can be executed. Pattern change timing can be setup with the editing software. Automatic Automatic Maximum pattern display 63 Patterns Maximum group number 15 Groups 10 min. progress 30 min. progress 50 min. progress Determine thresholds for pressure temperature, etc. Pattern transition timing can be controlled by individual discrete inputs. 2. Pulse-trigger Transitions from one pattern to another can be triggered by setting elapsed time or by individual discrete inputs. Maximum pattern display Maximum group number 63 Patterns 15 Groups Level 1 Level 2 Level 3 * The screen above is only an image (conditions may vary with setup parameters). Error level Request Priority Status Display, etc. s 1-5, with OOFF signal combinations, is made to operate. patlite Search 21 different colors can be selected as part of a program. Signal Tower Setup Features With a maximum of 15 groups*, 63 series of operations can be registered to perform an operation setup as one group. * A single display type can register a maximum of 31 groups. Select the desired color, flashing period and the active duration of the light and alarm* (maximum of 3,600 seconds, and 11 sounds). * Limited to Time Trigger and Pulse Trigger modes Various Setups Group setup (Detailed Settings) Flash Reduction Setup Time Span (0.1 sec.1.0 sec.) Repetitive Lighting Setup Sign pattern generation (9 colors) Generate colors as gradations or chaser lights. - select: Cycle Speed (LowHigh) Simulation Check the light pattern by previewing it before transmitting data into the unit. System Transmit and Receive* Data can be written into the unit and also read from it, so that patterns can be easily copied into other units. * Data transfer is also possible when the main unit is OFF and the system's power source is the US bus power. Editing software and pre-set data patterns are downloadable for free from our website. 3. Single-display The product memory operates for the individual group functions. Maximum pattern display Maximum group number Signal Tower Mode 31 Groups 9 Group 1 Group 2 Group Push the setup key for about 0.5 second after the power source is O. All tiers begin flashing green. Continue pushing for about 3 seconds to start selecting the desired LED color. START s can be configured manually with the push button, without the need to edit the software. Continue pushing for about 3 seconds to enter the selected LED color. LY L Off R Y P V W G Repeat for all tiers 11

8 DIMESIOS AD WIRIG Outer Dimensional Drawings Wiring LA6 T Direct mountterminal D 24V DC L J Steel Pole with L-bracketCable D 24V DC 24V DC Wiring (LA6) Classification WJ Direct mountcable A V AC Overall Height 5 - : : : : US Cover In ack 2 1 Maximum oard thickness: 4 mm T Underside View Threaded hole for cable gland attachment (M 1.5 Effective screw length: mm) 3 Maximum oard thickness: mm Mounting Dimensional Drawing 5.5 ase Plate LA6-5DTW-POE Mounting Dimensional Drawing Rear View Product Outside Dimension ( T ) 81 2 Use φ23 for Cable Gland (34.6) 2-φ 11 Direct Mount 10 lack Power Line (Signal-line Side) Pulse Enable Common 8 Yellow Power Wire 7 lack Alarm 2 7 Alarm White LED lue 2 Orange LED Power Line (Signal-lineSide) 6 Power Wire COM 11 Pulse Enable Common 10 ModeChange ①Time-trigger 1 Red 2 Amber ②Pulse-trigger Display inary Maximum 15 Display inary Maximum 15 Display inary Maximum 31 3 Green 4 lue 5 White STOP Trigger 6 Purple Mute Mute Mute 7 Sky lue Clear Clear Clear Mode Change Pink LED 1 1 Output Unit ① Circuit Diagram Pink C E Alarm 24V DC (Class 2) Classification rown LED 1 1 LED 2 2 LED 3 3 LED 4 4 LED 5 5 Alarm 1 6 Alarm 2 7 Mode Change Common Line Red Orange PLC P Transistor Don t Apply Voltage LA6-5A Alarm Common Line PLC Pulse Enable Output Unit ② Alarm Pulse Enable Lighting Alarm Green lue White Purple Sky lue Pink Yellow Gray lack L Common Line rown LED 1 1 LED 2 2 LED 3 3 LED 4 4 LED 5 5 Alarm 1 6 Alarm 2 7 Mode Change Common Line Red Orange Classification Output Unit ① Pink Yellow Circuit Diagram C Gray lack L Fuse 1A V AC E Alarm Wiring Diagram color and number indication Relay Red ① 1 ote Since flashing and Pulse Enable Common are uncontrollable for a PoE input, do not connect it. Lighting Alarm Green lue White Purple Sky lue V AC POE Wiring () Lighting Alarm Gray 10 6 Yellow 8 5 Pulse Enable Fuse 1A ③Single-display PoE Connector wire number Terminal connector wire number Cable signal wire number For Lighting At LED Green LED Red Stationary 11 Purple Mode Change 6 Gray LA Unit Outer Dimensions ameplate Location Smart Mode s (for Mode Change) LA6 (Terminal ) Red 1 1 Orange 2 2 Green 3 3 lue 4 4 White 5 7 Purple 6 8 Sky lue 7 9 e sure to visiting our website and viewing the comprehensive operation manual, etc. for further details. Mounting Hole (φ5x3 places) Distribution Hole (φ26) ameplate Location Connector s 9 Gray LED 1 1 LED 2 2 LED 3 3 LED 4 4 LED 5 5 Alarm 1 6 Alarm 2 7 Mode Change Don t Apply Voltage Pulse Enable Side View Lighting Alarm Relay LA6-5A Product Front (uzzer Diaphram) Mounting Hole (φ5) Wiring Hole (φ 2) 10 φ 60 φ Alarm Pulse Enable Alarm Classification Mounting Dimensional Drawing Mounting Hole (φ5 3 places) Common Line rown V AC Wiring (LA6) LA6-5DSW-POE Product Front (uzzer Diaphram) o Alarm Output Unit ② 24V DC (Class 2, on-polar) 40 Pulse Enable Gray 10 6 Yellow 8 5 LA racket (Unit: mm) Mounting Hole (φ5) 6 17 (10) Wire length: 1360 Wire type (Power): UL2464AWG18 Wire type (Signal): UL2464AWG24 L Dimensional Drawing for Steel Pole with L-bracket Alarm Stand Cover 25 8 Top View Front Direction (Alarm Direction) 8.5 (φ8.5) Wire length: 1060 Wire type: UL2464AWG24 <ote> The cable gland is not included with this product. Mounting Hole (φ5) ameplate Location 3 Cable gland Outer Dimension ameplate (ackside) Clear Switch LA Unit 284 φ LED 1 1 Red 1 1 LED 2 2 Orange 2 2 LED 3 3 Green 3 3 LED 4 4 lue 4 4 White 5 7 LED 5 5 Alarm 1 6 Purple 6 8 Alarm 2 7 Sky lue 7 9 Mode Change Pink o Alarm Common Line rown 9 11 Overall Height 5 - : Pulse Enable 40 PLC Pulse Enable φ 70 PLC P Transistor Don t Apply Voltage LA6 Headcover Mode Switch inside 1 LED Unit 70 Classification Don t Apply Voltage Stationary Overall Height 5 - : : : : 224 e sure to check the wiring diagram of the PP type transistor by visiting our website and viewing the comprehensive operation manual, etc. Relay LA6 Direct Mount Red indicates the lead wire color (for Cable type models) The lead wire color does not indicate the LED luminescence color. It can be used for the smart mode when a signal is applied to the mode change line. For connector inputs, mode change is terminal 11 purple ; and terminal 10 for the PoE type. Pulse Enable 11 Common line LED Tier LED Tier LED Tier LED Tier LED Tier Alarm Alarm Mode Change 10 Common line Do ot Use! LA Cable Connection The LA cable should be rated for category 5e or higher. A straight or cross cable can be used. MEMO Do ot Apply Voltage! e sure to use the IEEE802.3af compliant products for the PoE power feeder systems. Priority is given to the 24V DC power supply when both the 24V DC power source and PoE power feeder systems are connected simultaneously. If both power sources are simultaneously connected, when disconnecting the 24V DC source, this product may reboot. Do ot Use! 14