GMDSS Signal Unit POWER MONITOR

Transcription

1 R Raytheon Marine GmbH High Seas Products Postfach 66 D Kiel Germany Tel Fax service@raykiel.com -marine.com GMDSS Signal Unit POWER MITOR Type NG00 OPERATOR MANUAL 367/ DOC000 Edition: April 3, 003 Revised: June 5, 003 Revised: June 7th, 003 revised: Sept. 8, 004

2 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Toute communication ou reproduction de ce document, toute exploitation ou communication de son contenu sont interdites, sauf autorisation expresse. Tout manquement à cette règle est illicite et expose son auteur au versement de dommages et intérêts. Copying of this document, and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. Sin nuestra expresa autorización, queda terminantemente prohibida la reproducción total o parcial de este documento, así como su uso indebido y/o su exhibición o comunicación a terceros. De los infractores se exigirá el correspondiente resarcimiento de daños y perjuicios.

3 Technical Documentation CTENTS Page General... Operating Instructions.... Notes on the operating instructions.... Status Indications Alarm Indications Dimming Test Switching off... 5 Standard Wiring... 8 Edition: June 5, 003 I 367/ DOC000

4 367/ DOC000 II Edition: April 3, 003

5 Technical Documentation General The application for the GMDSS Signal Unit POWER MITOR is, to prevent unnoticed discharging of the radio reserve battery in a GMDSS radio station. The requirement was specified by the International Maritime Organisation (IMO) in COMSAR Circular 6 GUIDELINES THE CFIGURATI OF THE RESERVE SOURCE OR SOURCES OF ENERGY USED TO SUPPLY RADIO INSTALLATIS GMDSS SHIPS. The GMDSS Signal Unit POWER MITOR was developed to control the of the radio reserve battery and displays the failure of -- power supply units with automatic switch--over to battery operation -- battery chargers -- other units, which are used in a GMDSS radio station. Errors are signalsed by flashing light and an acoustic signal. The system has two supply inputs for 4V DC (battery and backup). In case of separate radio batteries for main and duplication equipment, it is possible to control a second battery. The signal input of GMDSS Signal Unit POWER MITOR can either be via or a contact. Additionally, the system has also a connection for an external dimmer and an external reset key. Fig. -: GMDSS Signal Unit POWER MITOR, type (with standard layout) Edition: April 3, / DOC000

6 This operator manual contains all operating instructions as well as a survey of possible warnings and alarms. Service Manual In addition to the operator manual a service manual is available. It contains information about installation and first putting into operation. 367/ DOC000 Edition: April 3, 003

7 Technical Documentation Operating Instructions With switching--on the 4 V DC supply the GMDSS Signal Unit POWER MITOR is set into operation.. Notes on the operating instructions Explanation of symbols: Key operation Signal or alarm position out WATCH Signal or alarm position on Alarm position flshing LED out LED on LED flashing Audible signal on Audible signal off Edition: April 3, / DOC000

8 . Status Indications Explanation of status indications display panel has no function WATCH display panel in normal status function display panel in alarm function 367/ DOC000 4 Edition: April 3, 003

9 Technical Documentation.3 Alarm Indications Indications Comments, Notes e. g.: When an alarm occurs: -- corresponding display lights up brightly -- alarm--led flashes red -- acoustic signal is emitted After alarm is acknowledged: -- corresponding display lights up brightly -- alarm--led lights red (constant light) -- acoustic signal stops sounding This indication remains until the error has been alleviated. Edition: April 3, / DOC000

10 .4 Dimming Indications Comments, Notes or: e. g.: WATCH INM -C MF/HF INM -C CHARGER Battery low CHARGER Battery high continuous brightness adjustment -- of the keys -- of the display Thedimmercannotbeused during an acoustic alarm. WATCH MF/HF CHARGER CHARGER Battery low Battery high INM -C INM -C.5 Test Indications Comments, Notes simultaneously WATCH INM -C MF/HF INM -C e. g.: WATCH CHARGER Battery low CHARGER Battery high The self--test runs for approx. 0 secs after pressing the key: -- each of three signal lams lights up (vertical) one after the other from left to right at their brightest setting (displays with no function remain dark) -- alarm--led lights up yellow. The configuration is then displayed: -- Lamps light up brightly in conriguration of normal status and warning. -- Lamps flash brightly in alarm configuration. -- displays with no function remain dark The test can not be carried out when the alarm is active. 367/ DOC000 6 Edition: April 3, 003

11 Technical Documentation.6 Switching off The unit is set out of operation by switching--off the 4 V DC supply s. Edition: April 3, / DOC000

12 GMDSS Signal Unit Power Monitor (view from behind, standard configuartion) RS4 Dsub9 male B5 Batt high Batt low Batt high Batt low R3 R3 R4 R3 L Batt IN+ Batt IN-- Batt Low+ Batt Low-- Batt High+ Batt High Battery 4VDC Batt IN+ Batt In-- 4VDC backup (option: Battery) Batt Low+ Batt Low-- Batt High+ Batt High-- 3 0V +4V B3 Basic PCB Battery control PCB H5 H H9 H8 H4 H5 H L Charger INM--C PSU H H H4 H6 H0 H7 H H EXT. DIM (option) MF/HF PSU Charger PSU PSU INM--C PSU EXT. RESET (option) Charger WATCH MF/HF H6 INM--C Display panels Battery low Charger H H H3 H4 H5 H7 INM--C H8 H9 Battery high H0 H H H3 H4 H5 Factory Preset Configuration -- All signal inputs are external NO contacts (normally open) -- H is a status indicator (green) -- H, H4, H5, H6, H7, H9, H0, H and H are alarm indicators (red) -- H3, H8, H3, H4 and H5 are not used Remarks -- Batt IN and Batt IN are DC Power Supply (4V) and sensor inputs -- Modifing the factory preset configuration via: a) Jumper settings (external contact/external ) b) Setup mode (signal index [...5], signal mode [Alarm, Warning, Status, not used], delay time [0...5s], Input mode [normal, invers]) c) Lamp colour and inscription LEGEND: External Wiring 367/ DOC000 8 Edition: Sept. 8, 004