Dynamic Escape Routing system. D.E.R. system. Sicherheitstechnik GmbH

Transcription

1 Dynamic Escape Routing system D.E.R. system Sicherheitstechnik GmbH

2 We take new paths INOTEC Sicherheitstechnik GmbH is a mediumsized company that develops innovative and customer-oriented solutions in the area of emergency and safety lighting. A dynamic team of flexible and competent employees ensures reliable support in all matters relating to products, planning and regulations. Modern, high-tech products set new standards around the world, such as emergency lighting systems with JOKER technology and the Dynamic Escape Routing system D.E.R. This catalogue contains the INOTEC Dynamic Escape Routing system D.E.R. and complementary products. Should you require additional functions or components, please do not hesitate to contact our regional technical sales staff directly. Contents Page System description - 5 Copyright: INOTEC Sicherheitstechnik GmbH, Ense Reprinting and reproduction, even in excerpts, is permitted only with approval of the manufacturer. Subject to technical changes. The systems presented in the catalogue are not compatible with monitoring systems of the type INOTEC SVPC, SV central stations or multifunction controllers. Radio shielding acc. to DIN EN 5505 Application example 6-7 Circuit schematic 8-9 Luminaires overview 0 - System components and options - 5 Central monitoring 6-7

3 ollow us Are escape routes always escape routes? Emergency exit luminaires with fixed directional signs are used to mark escape routes and fulfil the task of enabling people to reach safe locations in the event of a power failure or a necessary evacuation. But what happens if fire and smoke are blocking the nearest escape route? What to do when heavy smoke emissions mean it is no longer possible to work out where you are? How do you find the escape route when the escape route sign is no longer visible? Do you have anything against a higher level of safety? INOTEC Sicherheitstechnik GmbH has taken on the problem of smoky escape routes with the aim of complementing fixed, unchangeable escape route signage with dynamic escape route guidance. A dynamic system has to fulfil two key tasks: on one hand, it must prevent anyone from escaping into an area that is already filled with smoke, and on the other, it must ensure that the people already in smoky areas can still find their way to the escape route. The solution is the Dynamic Escape Routing system (D.E.R.). Emergency exit luminaires with integrated LED matrix not only ensure static designation of escape routes, they can also be used for indicating an alternative escape route direction. Smoke-filled areas or escape routes can be visually blocked off in this way with a red, X-shaped pattern of LEDs. Because why should an escape route remain signposted when it is smoky and no longer usable? Luminaires for floor installation or wall installation near the floor are used for orientation in smoke-filled areas. In event of a fire, the running light function of these lights points the direction of the path to the emergency door and safety. The flashing function of the D.E.R. system can be useful for a building evacuation even when there is no fire.

4 We take new paths unctionality of the D.E.R. system The D.E.R. system communicates with the building's existing fire detection system. Potential-free contacts, activated by the fire alarm system, send a signal to the D.E.R. interface. The D.E.R. controller evaluates the defined information of the fire alarm system and activates the escape route direction patterns stored in the controller. This automatically activates the D.E.R. luminaires, which indicate the safe escape route with running lights, for example. The green LED arrows are used to indicate the direction. At the same time, the emergency doors that should no longer be used are visually blocked with red flashing LED X's. lashing lights mounted close to the floor near emergency doors additionally indicate the escape routes so that these remain identifiable even in the presence of smoke. Should the fire or smoke spread farther, the D.E.R. system can respond by activating other escape route plans and rearranging the luminaires accordingly. Even very small systems, starting with individual luminaires, can be implemented with limited functions by activating the luminaires directly via potential-free contacts of the fire alarm system. The high flexibility of the D.E.R. system results not only from its dynamic nature but also the option of connection to INOTEC emergency light systems as well as to any secured mains (AC/DC) with an appropriate voltage level. Regulations As a result of use of the innovative D.E.R. system in airports, hospitals, theatres, train stations etc., there has also been a response in terms of regulations. In January 00, the German ederation of Institutions for Statutory Accident Insurance and Prevention (HVBG) published the regulation BGR 6 "Visual Safety Guidance Systems (Including Safety Guidance Lighting)", which requires the use of nearto-floor safety guidance systems for buildings with increased risk under certain conditions. or example, this includes buildings with more than three storeys, building complexes with multiple interconnecting individual buildings, buildings with a large share of outside

5 ollow us personnel and buildings with a large share of people with reduced mobility (bed-ridden or physically disabled persons). EN 507 lists safety guidance systems that can increase the effectiveness when used along escape routes in addition to typical safety lighting luminaires. In the Technical Rule for Workplaces "Safety Lighting, Visual Safety Guidance Systems" ASR A./ from May 009, the Committee for Workplaces (ASTA) describes in detail the use of visual safety guidance systems for workplaces with reference to ASR A., which in turn regulates the cases in which a visual safety guidance system for escape routes is required. ire Safety Award The D.E.R. system was honoured by fire safety experts as a key development for increasing the safety of people by being awarded the Germany ire Safety Award 00. Apart from the current regulatory situation, additional applications have arisen in practice for dynamic escape route guidance systems. or example, such a system can be used to compensate for some structural fire protection measures. 5

6 D.E.R. system Application example The various D.E.R. components make it possible to realise flexible, dynamic escape route guidance that is adapted to the specific building. In event of smoke or fire, the people present will be guided safely out of the danger zone via the escape routes that are still open. 6

7 D.E.R. system Building with cinema, restaurant and car park D.E.R. in practical use D.E.R. luminaires can be useful for everyday orientation. The LED luminaires of series S000 are used for route designation or as accent lights in parking buildings or rooms intentionally kept dark, such as cinemas/theatres. 7

8 R T INOTEC GND RxD G/ +V InoLan TxD R R T INOTEC GND RxD T INOTEC GND RxD G/ G/ Betrieb Transmit Receive +V InoWeb TxD +V InoWeb TxD luchtweg. Bel. Betrieb Dienstag Muster 7.0 :00 Menue Netz Netz CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa CP xa 6AT Ladeteil 0V/7,5A CP xa 6AT CP xa CP xa Ladeteil 0V/7,5A CP xa CP xa CP xa CP xa CP xa CP xa Betrieb Batt.-Betrieb Störung Lade- Störung Reset R T CP xa CP xa INOTEC CP xa Drucker Centronics Key-Board CP xa Betrieb Betrieb Betrieb Betrieb Betrieb Betrieb Störung Störung Störung Störung Störung Störung Test Test Test Test Test Test Ein CP xa Ein 0AT 0AT CP xa Batterie Batterie CP xa 5 AT 50 D.E.R. system Circuit schematic V signal via pot.-free contacts of the fire alarm control panel LSA 8 reset RTG RS VISU T R InoLan module VISU card Betrieb INOTEC luchtweg. Bel. Netz-Ausfall Betrieb Montag Muster Störung 7.0. :0 Menue Lade Störung Drucker Centronics Key-Board CPS 0 / 6 CPS 0 / 6 reset RTG RS W99 W99 W99 W99 W99 W99 T T T T T T R R R R R R D.E.R. controller with W99 and VISU cards Remote monitoring and floor plan visualisation with SVPCn software Secured network via generator, or battery system, e.g. INOTEC CPS V signal via pot.-free contacts of thefire alarm control panel LSA 8 V plug-in unit for CPS 0/6 SV,5A When using the V plug-in unit, CPUSB or CLS, remote monitoring is only possible via InoWeb-Control software in connection with an InoWeb module! reset RTG RS InoWeb module CPUSB V Remote monitoring by InoWeb-Control software Central battery system CPS 6 SV BUS substation for CPS 0/6 SV InoWeb module CLS V / SV 8

9 D.E.R Power Supply PSU 8 Am Buschgarten 7 D-5969 Ense U E : 0 V ~ 50/60 Hz U E : 8,5-60 V I : 0,8 A ON E U A : 8 V I A : A ϑ : C P/N : Am Buschgarten 7 D-5969 Ense U E : 0 V ~ 50/60 Hz U E : 8,5-60 V I : 0,8 A ON E U A : 8 V I A : A ϑ : C P/N : D.E.R Power Supply PSU SEV D.E.R. system Circuit schematic ire section L series 5 INOTEC Sicherheitstechnik GmbH INPUT OUTPUT N L + - INOTEC SEV module with power supply S series B series INOTEC Sicherheitstechnik GmbH INPUT OUTPUT N L + - SEV INOTEC SEV module with power supply S series ire section 5 S000 module S000 module S000 module ire section Third-party luminaire without monitoring Third-party luminaire without monitoring B series without monitoring L series (5000 range only) ire section L series (5000 range only) ire section L-Serie (nur 5000er) 8 V signal via pot.-free contacts of the ACP ire section 8 V signal via pot.-free contacts of the ACP 8 V signal via pot.-free contacts of the ACP 9

10 We develop for you Extremely durable stainless steel luminaire Green LED arrows for direction indication Running light function Control and automatic function monitoring via segment controller SEV or SEV/A S 000 BE Art. No Art. No lush floor installation Cable inlet from side Cable inlet from below 8 Housing material: Connection terminals: Stainless steel LEDs 8 V DC 6 ma Suitable for wires xx0.8 and pass-through wiring C Perm. temperature Protection category: IP 5 Protection class: III (safety extra-low voltage 8 V DC) S 000 TE Art. No Art. No lush carpet installation Cable inlet from side Cable inlet from below Stainless steel luminaires for wall installation in cavity wall box Green LED arrows for direction indication Running light function Control and automatic function monitoring via segment controller SEV or SEV/A S 000 WE Art. No lush wall installation ø90 ø58 ø7 Housing material: Connection terminals: Stainless steel LEDs 8 V DC 6 ma Suitable for wires xx0.8 and pass-through wiring C Perm. temperature Protection category: IP 0 Protection class: III (safety extra-low voltage 8 V DC) 6,5 0

11 Plan with us Tunnel or corridor luminaire Easily visible even from an extreme angle Green LED arrows for direction indication Running light function Control and automatic function monitoring via segment controller SEV or SEV/A S 7000 Art. No Wall surface installation Housing material: Stainless steel LEDs 8 V DC 6 ma Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 5 Protection class: III (safety extra-low voltage 8 V DC) Stainless steel luminaire Green LED arrow matrix for direction indication Running light function Control and automatic function monitoring via segment controller SEV or SEV/A Housing material: Stainless steel LEDs 8 V DC 00 ma Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 5 Protection class: III (safety extra-low voltage 8 V DC) S 000 Art. No Wall surface installation

12 We develop for you Tunnel luminaire Green LED arrow matrix for direction indication Integrated safety luminaire 0W LLp (optional LEDs) Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 00 WE Art. No L lush wall installation Housing material: Stainless steel VA powder-coated LEDs, 0W LLp (optional LEDs) 0V ±0% AC / 0V ±0% DC 9 ma SMains:. VA Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 65 Protection class: I 00 Colours Art. No. Colour code Silver-grey... L0 Special colours... L99 Append the colour code to art. no.: e.g LXX Channel luminaire Modular design reely selectable content: - LED arrow matrix for direction indication - Escape symbol backlit with LEDs - Green Xenon flashing lamp Control and automatic function monitoring via D.E.R. controller Adjustable length, e.g. to door width Electronics with output for a flashing luminaire of the B series L 000 Art. No V 7 je nach Ausführung 75 Wall surface installation Housing material: SMains: Connection terminals: Perm. temperature Protection category: Protection class: Viewing distance: Aluminium LEDs 0V ±0% AC / 0V ±0% DC 75 ma (minimum value depending on design).6 VA (minimum value depending on design).5 mm² for pass-through wiring C IP0 I 0 m Colours Art. No. Colour code Special colours... L99 Append the colour code to art. no.: e.g LXX Special pictograms upon request Please use the corresponding table at www. inotec-licht.de for specifying the luminaire content.

13 Plan with us LED arrow matrix for direction indication Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 6000 IP5 Art. No L0 6,5 Wall surface installation Housing material: Sheet steel powder-coated LEDs 0V +/- 0% AC; 0V +/- 0% DC 9 ma SMains: 9. VA Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 5 Protection class: I 95 Colours Art. No. Colour code Silver-grey... L0 Special colours... L99 Append the colour code to art. no.: e.g LXX LED arrow matrix for direction indication Escape symbol backlit with LEDs Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 6000L IP5 Art. No L0 59 6,5 Wall surface installation Housing material: Sheet steel powder-coated LEDs 0V +/- 0% AC; 0V +/- 0% DC 75 ma SMains:.6 VA Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 5 Protection class: I Viewing distance: 0 m 95 Colours Art. No. Colour code Silver-grey... L0 Special colours... L99 Append the colour code to art. no.: e.g LXX Special pictograms upon request

14 We develop for you Single-sided luminaire with LED arrow matrix for direction indication Escape symbol backlit with LEDs Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 600 Art. No L0 8 5 Wall installation 8 Housing material: SMains: Connection terminals: Perm. temperature Protection category: Protection class: Viewing distance: Sheet steel powder-coated LEDs 0V ±0% AC / 0V ±0% DC 75 ma.6 VA.5 mm² for pass-through wiring C IP 0 (IP 5, depending on design) I 0 m L 600 D Art. No L Ceiling installation Colours Art. No. Colour code Silver-grey... L0 Special colours... L99 Append the colour code to art. no.: e.g LXX L 600 P Art. No L0 Suspended installation 8 00 L 600 IP5 Art. No L0 Wall installation 6,5 ca. 85 Special pictograms upon request

15 Plan with us Double-sided luminaire with LED arrow matrix for direction indication Escape symbol backlit with LEDs Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 600 D Art. No L Ceiling installation Housing material: SMains: Connection terminals: Perm. temperature Protection category: Protection class: Viewing distance: Sheet steel powder-coated LEDs 0V ±0% AC / 0V ±0% DC ma 5 VA.5 mm² for pass-through wiring C IP 0 (IP 5, depending on design) I 0 m L 600 P Art. No L Suspended installation Colours Art. No. Colour code Silver-grey... L0 Special colours... L99 ca. 85 Append the colour code to art. no.: e.g LXX L 600 D IP5 Art. No L0 Ceiling installation 8 08 L 600 K IP5 Art. No L0 Chain installation 8 06 Special pictograms upon request 5

16 We develop for you Single-sided aluminium profile luminaire with LED arrow matrix for direction indication Escape symbol backlit with LEDs Control and automatic function monitoring via D.E.R. controller Electronics with output for a flashing luminaire of the B series L 786 Art. No Wall installation, 50, 80 Housing material: Aluminium LEDs 0V ±0% AC / 0V ±0% DC 75 ma SMains:.6 VA Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 0 Protection class: I Viewing distance: 0 m SNP 786 D Art. No Ceiling installation L 786 P Art. No Suspended installation Special pictograms upon request 6

17 Plan with us Double-sided aluminium profile luminaire with LED arrow matrix for direction indication Escape symbol backlit with LEDs Control and automatic function monitoring via D.E.R. controller Electronics with output a flashing luminaire of the B series L 786 D Art. No Ceiling installation 80 Housing material: Aluminium LEDs 0V ±0% AC / 0V ±0% DC 75 ma SMains:.6 VA Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 0 Protection class: I Viewing distance: 0 m L 786 P Art. No Suspended installation Special pictograms upon request 7

18 We develop for you Single-sided luminaire in modular design ( module) reely selectable content Symbols or templates backlit with LEDs Control and automatic function monitoring via D.E.R. controller or central battery system CPS 0/6 SV with V plug-in unit or V substation ( V version) Monitoring also possible with emergency lighting system CLS SV ( V version). Three additional control inputs for external control commands Energy supply generally possible via V or 8 V outside network. L 50 Art. No V L Wall installation V Can be equipped with: - Escape symbol as pictogram (LEDs white) - Directional arrow as pictogram (LEDs white) - Directional arrow as template (LEDs white or green) - Blocked symbol as template (LEDs red) Housing material: Sheet steel powder-coated LEDs V +/- 0% ( V version) I Bat Emerg. ( V version): 6 ma (white+green LEDs) or 6 ma (red LEDs) Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 0 Protection class: III ( V version) Viewing distance: 0 m L 50 WE Art. No V L lush wall installation V Colours Art. No. Colour code White textured... L0 Slate grey... L6 Special colours... L99 Append the colour code to art. no: e.g LXX Special pictograms upon request Please use the corresponding table at www. inotec-licht.de for specifying the luminaire content. 8

19 Plan with us Single-sided luminaire in modular design ( modules) reely selectable content Symbols or templates backlit with LEDs Control and automatic function monitoring via D.E.R. controller or central battery system CPS 0/6 SV with V plug-in unit or V substation (only V version) Monitoring also possible with emergency lighting system CLS SV ( V version) and central battery system CPS 0/8/6 (0 V version) Three additional control inputs for external control commands Energy supply generally possible via V, 8 V or 0 V outside network. L 50 Art. No V L6 Art. No V L Wall installation V 0 V Can be equipped with: - Escape symbol as pictogram (LEDs white) - Directional arrow as pictogram (LEDs white) - Directional arrow as template (LEDs white or green) - Blocked symbol as template (LEDs red) Housing material: Sheet steel powder-coated LEDs V +/- 0% ( V version) 0V +/- 0% AC; 0V +/- 0% DC (0 V version) I Bat Emerg. ( V version): Per module 6 ma (white+green LEDs) or 6 ma (red LEDs) I Bat Emerg. (0 V version): Per module 9 ma (white+green LEDs) or 8 ma (red LEDs) SMains (0 V version): Per module VA (white+green LEDs) or VA (red LEDs) Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 0 Protection class: III ( V version) or I (0 V version) Viewing distance: 0 m L 50 WE Art. No V L0 Art. No V L lush wall installation V 0 V Colours Art. No. Colour code White textured... L0 Slate grey... L6 Special colours... L99 Append the colour code to art. no: e.g LXX Special pictograms upon request Please use the corresponding table at www. inotec-licht.de for specifying luminaire content. 9

20 We develop for you Single-sided luminaire in modular design (5 modules) reely selectable content Symbols or templates backlit with LED Control and automatic function monitoring via D.E.R. controller or central battery system CPS 0/6 SV with V plug-in unit or V substation ( V version) Monitoring also possible with emergency lighting system CLS SV (only V version) and central battery system CPS 0/8/6 (0 V version) Three additional control inputs for external control commands Energy supply generally possible via V, 8 V or 0 V outside network. L 505 Art. No V L0 Art. No V L Wall installation V 0 V Can be equipped with: - Escape symbol as pictogram (LEDs white) - Directional arrow as pictogram (LEDs white) - Directional arrow as template (LEDs white or green) - Blocked symbol as template (LEDs red) Housing material: Sheet steel powder-coated LEDs V +/- 0% ( V version) 0V +/- 0% AC; 0V +/- 0% DC (0 V version) I Bat Emerg. ( V version): Per module 6 ma (white+green LEDs) or 6 ma (red LEDs) I Bat Emerg. (0 V version): Per module 9 ma (white+green LEDs) or 8 ma (red LEDs) SMains (0 V version): Per module VA (white+green LEDs) or VA (red LEDs) Connection terminals:.5 mm² for pass-through wiring Perm. temperature C Protection category: IP 0 Protection class: III ( V version) or I (0 V version) Viewing distance: 0 m L 505 WE Art. No V L6 Art. No V L lush wall installation V 0 V Colours Art. No. Colour code White textured... L0 Slate grey... L6 Special colours... L99 Append the colour code to art. no: e.g LXX Special pictograms upon request Please use the corresponding table at www. inotec-licht.de for specifying luminaire content. 0

21 Plan with us Plastic flashing luminaire (polystyrene) Xenon flashing lamp Control via luminaires of the L series or via S0 module (S0 module only in combination with D.E.R. controller) Housing material: Green plastic cover (polycarbonate) Xenon flashing lamp V DC 7 ma Connection terminals: Up to.5 mm² Perm. temperature C Protection category: IP 67 Protection class: II B 5000 V Art. No ø77 5 Wall / ceiling installation Supply modules for connection to - D.E.R. luminaires of the L series (ET 9/) 5 ø75 - Central battery system CPS 0 (J-ET 9/) - D.E.R. controller and secured network 0 V (S 0) in module housing incl. connection terminal adapter lashing luminaire for wall installation in cavity wall box Green plastic disc Control via luminaires of the L series or via S000 module (S000 module only in combination with D.E.R. controller) Housing material: Stainless steel Xenon flashing lamp 0V ±0% AC / 0V ±0% DC 0 ma SMains: 7. VA Connection terminals: Up to.5 mm² Perm. temperature C Protection category: IP 0 Protection class: I B 5000 WE Art. No ø90 ø58 ø7 50 6,5 lush wall installation Xenon flashing luminaire Green plastic disc Control via luminaires of the L series or via S000 module (S000 module only in combination with D.E.R. controller) B 5005 Art. No L0 00 Wall installation Housing material: Sheet steel powder-coated Xenon flashing lamp 0V ±0% AC / 0V ±0% DC 0 ma SMains: 7. VA Connection terminals: Up to.5 mm² Perm. temperature C Protection category: IP 0 Protection class: I Colours Art. No. Colour code White textured... L0 Special colours... L99 Append the colour code to art. no: e.g LXX

22 We develop for you Regulated power supply With mains and overload display via LED (only PSU and 8-) Output electrically isolated acc. to EN (safety low voltage) Suitable for flush mounting on DIN profile rails Various designs with various output current levels or supplying the segment controller SEV with luminaires of the S series (8 V) and the interface LSA8 ( V) PSU Art. No Supply device (PSU and 8-) Housing material: Thermoplastic 0 V +/- 5% AC, 8-60V DC Output voltage: V (PSU ) or 8 V (PSU 8-) Output current:.5 A (PSU ) and A (PSU 8-) Overload capability: Sustained short-circuit-proof Perm. temperature -0 C C Protection category: IP0 (terminal) Protection class: I PSU 8- Art. No Supply device (PSU 8-.6 and 8-5) PSU 8-.6 Art. No. 6 0 Supply device Housing material: Aluminium 0 V AC 0-70 V DC Output voltage: 8 V DC Output current:.6 A (PSU 8-.6) and 5 A (PSU 8-5) Overload capability: Sustained short-circuit-proof Perm. temperature -0 C C Protection category: IP0 (terminal) Protection class: I 5, 00 55,5 PSU 8-5 Art. No. 6 0 Supply device 5, 00 5,5

23 Plan with us Segment controller for programming, control, management and testing of up to 96 S luminaires. Connection to D.E.R. controller via -wire bus line. Two-line display, buttons for programming and testing, red LED for fault indication. 8 V input voltage via regulated power supply of type PSU 8. SEV Art. No Housing material: Plastic DIN rail housing 8 V Output voltage: 8 V Address SEV 0-99 Luminaires 0-96 Wire connection: Double-use terminal.5 mm² Perm. temperature C Power consumption: Max..7 Protection category: IP 0 Dimensions: 90 mm x 70 mm x 58 mm (HxWxD) Independent segment controller for programming, control, management and testing of up to 96 S luminaires. Two-line display, buttons for programming and testing, red LED for fault indication. Wide voltage input ( to 8 V DC) for pattern creation. Two patterns can be programmed. Automatic function test. Potential-free fault signalling contacts (NO-contacts). 8 V input voltage via regulated power supply of type PSU 8. SEV/A Art. No Housing material: Plastic DIN rail housing 8 V Output voltage: 8 V Address SEV 0-99 Luminaires 0-96 Wire connection: Double-use terminal.5 mm² Perm. temperature C Power consumption: Max..7 Protection category: IP 0 Dimensions: 90 mm x 70 mm x 58 mm (HxWxD)

24 We develop for you V circuit plug-in unit or substation CPUSB with circuits for central battery system CPS 0/6 in combination with TT convenient control unit for supply, control and monitoring of V D.E.R. luminaires (L 5000 series). Mixed operation within one circuit with V INOTEC LED system luminaires. - -pole protection per circuit - Individual luminaire control and monitoring - Max. 0 luminaires per circuit - Control and monitoring without data line - Luminaires can be individually programmed and addressed - output circuits in protection class III (SELV) at.5 A - switching inputs can be freely assigned to each luminaire CPUSB 0/6/-.5/V CP V x.5 A Art. No. 9 6 Art. No Interface for connection to D.E.R. controller (max. units per controller). Escape route patterns programmed in the D.E.R. controller can be activated via 8 switching inputs of the module. The input voltage of the LSA 8. channels may be from 5 to 0 V DC. The input voltage is connected to the inputs via potential-free contacts, such as from a fire alarm system. LSA 8. V Art. No Supply device unction-monitored control module for connection to an W99 card (BUS) and a secured power supply (e.g. CPS 0). Consumers of up to 0 W can be switched via the module. Housing material: Output voltage: Perm. temperature Protection class: Wire connection: Monitoring, supply and control module for to 6 power LEDs for connection to the W99 card of a D.E.R. controller (BUS) and a secured power supply (e.g. CPS 0). lashing function, switching on and off of the connected LEDs -pole socket board for connection of the LEDs Also suitable for supplying and activating the flashing luminaire B 5000 V. Housing material: Output voltage: Perm. temperature Protection class: Wire connection: Polycarbonate UL V0 0V 50/60 Hz, 0V +/- 0% DC 0V 50/60 Hz, 0V +/- 0% DC C I.5 mm² single core or.5 mm² braided with cable end sleeve Polycarbonate UL V0 0V 50/60 Hz, 0V +/- 0% DC V DC C I.5 mm² single core or.5 mm² braided with cable end sleeve S 000 Art. No S 0 Art. No

25 Plan with us ully automatic microprocessor-controlled testing device for monitoring of max. 58 addresses in connection with INOTEC luminaires of the L series, S000 or S0 modules and segment controllers SEV. Suitable for inclusion of max. 6 plug-in cards (W99 and Visu). Serial data bus via -wire, unshielded data line, e.g. YR x 0.8 mm². reely programmable, automatic function test of all connected luminaires, modules and segment controllers. Error messages: - Lamp defective - Transmission error - Device error The following standard functions are included: - All test results of the last two years are automatically saved and can be loaded at any time (up to 000 events) - Printer interface for maintaining the required log book according to standards - Potential-free collective fault contact Options: The controller can also be expanded with expansion modules (max. 6 plug-in units each) (max. 6 plug-in units per controller). D.E.R. controller Art. No Expansion module Art. No D.E.R. controller 0 Housing material: Mains voltage: Protection category: Protection class: Polycarbonate 0 V AC ± 0 %, 50/60 Hz 0 V DC ± 0 % II IP0 EMC protection in acc. with EN W 99 module Art. No Accessories W 99 module Plug-in unit for D.E.R. controller for control, management and testing of max. 99 bus devices such as luminaires of the L series, segment controllers SEV and S 000 or S 0 modules. ViSU module Plug-in unit for D.E.R. controller as interface for data transmission to a PC via SVPCn software in connection with an InoLan module for visualisation of a D.E.R. system. ViSU module InoLan Art. No Art. No InoLan module Converter between Ethernet and serial INOTEC-RTG data bus or RS. 5

26 Central monitoring and data backup Centralised, PC-controlled monitoring is recommended in order to maintain an overview of even complex installations. The INOTEC SVPCn software supports you in commissioning and programming as well as in the testing and logging required during daily operation. Whether the INOTEC-specific RTG-BUS, an existing network or the Internet is used for connection to the PC depends on the specific project requirements. SVPCn Software Logbook Panel : C0 ================================================= I : I Segment failure : Card is installed ailure --> Card : Sum-failure ailure --> Card : Data communication failure I : I Segment failure : Card is installed ailure --> Card : Sum-failure ailure --> Card : Data communication failure I : I Segment failure unctionality: Monitoring of up to D.E.R. or NEA controllers Individual signalling of up to 7,50 addresses for D.E.R. systems Automatic function test Zoomable floor plan display (DX files) Test log can be accessed and printed from the control components Each individual luminaire can be programmed via the interface Transmission via the existing Ethernet Programming can be secured against unauthorised access with a password System requirements: Operating system: Win98/000/XP/Vista/ 7 Business/Vista Enterprise Monitor: VGA (60x80), 56 colours or more Interface: INOLAN module via RJ5 port 6

27 : :0 Betrieb Betrieb Betrieb Betrieb Betrieb Betrieb Störung Störung Störung Störung Störung Störung Test Test Test Test Test Test Betrieb Betrieb Betrieb Betrieb Betrieb Betrieb Störung Störung Störung Störung Störung Störung Test Test Test Test Test Test D.E.R. system Central monitoring and data backup Detailed status information can be accessed for each luminaire. The exact location designation from the control component is also displayed in the interface. Every setting can be programmed on the control component and the luminaire from the PC. InoLan INOTEC Betrieb NE-SV-Überwachung Batt.- Betrieb Betrieb Störung Menue -> INOTEC Betrieb NE-SV-Überwachung Batt.- Betrieb Betrieb Störung Menue -> W99 W99 W99 W99 W99 W99 Ladestörung R T Drucker Cetronics Key-board T T T T T T R R R R R R Ethernet DER InoLan NE99 NE99 NE99 NE99 NE99 NE99 Ladestörung R T Drucker Cetronics Key-board T T T T T T R R R R R R NEA Red = failure By using DX files for representing the floor plan, the plan can be zoomed in and out. The luminaire status is highlighted in colour. Green = normal operation 7

28 /0 INOTEC Sicherheitstechnik GmbH Am Buschgarten 7 D Ense Tel / ax / info@inotec-licht.de 8 Sicherheitstechnik GmbH