PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

Transcription

1 Machinery Listings Finishing Artos Finatex International: Please ask for details at: Reference: Cost: 0 Terms: - -ARTOS /BABCOCK STENTER machine width 3200 mm, with n.6 chambers, diathermic oil heated, pins and clips, Artos enter and delivery mangle, Bianco weft straightener, yoc 1984 Reference: Cost: 0 Terms: - -STENTER ARTOS, year 1979, 6 chambers, w.w mm, oil heating, padder Reference: Cost: 0 Terms: SEE -Stenter ARTOS, 3.200mm, 4 chambers, termal oil, pin horizontal chain, padder, manual weft straightener, glue selvedges+vacuum,folding system and small roll, Location:Europe SPECIAL PRICE: ,00 F.O.T. Reference: 7459 Cost: 0 Terms: SEE Babcock Revized: 1 ARTOS/BABCOCK Tenter Frame, Model 5301, Year 1986 Working Width 3.2m, Impregnation Foulard, Model 5880, with Squeezer Steaming Unit, Mahlo Weft Straightener, 6 Cells, Horizontal Clip Chain 8 Compartments, Steam Heated, Mahlo Orthomat Humidity Controller Exit with 2 Cooling Cylinders, Mahlo Weft Straightener, 4 Cells Delivery to Plaiter or Batcher Available: end 2012, still in production USD 180, CFR Major Sea Port Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

2 Reference: Cost: 0 Terms: - -BABCOCK STENTER WW 3200MM YEAR 1998 WITH 2 WASHING COMPARARTMENT BABCOCK ARTOS WET-TEX, 3,20M WORKING WIDTH, Y.O.M. 1998, CSISTING OF: OPEN-WIDTH WASHING MACHINE WET-TEX WITH 2 WASHING COMPARTMENTS, 15,5M AND 10M CLOTH CAPACITY, EACH WITH SQUEEZER 2-ROLLER FOULARD BABCOCK, TYPE 5805 WEFT STRAIGHTENER MAHLO ORTHOMAT STENTER BABCOCK/ARTOS, 7 BAYS, HORIZTAL CLIP/PIN CHAIN, GAS-HEATED, ENTRY BAY 3 STEAMING DEVICE PLAITER BATCHING DEVICE HEAT RECOVERY BRÜCKNER ECO-HEAT 12L/L Reference: Cost: 0 Terms: SEE -We have 5 chambers 340 cm BABCOCK stenter,oil heated,pin+clip 1995 yoc,kusters dye padder + 2 chambers washing in entrance,2 chambers pre dryer. PRICE: USD EX.WORK Reference: 7241 Cost: 0 Terms: SEE 1 BABCOCK Tenter Frame, Model 5301, Year 1986, Working Width 2,3 m Foulard, Clip Chain, 8 Comp. Oil Heated Price: USD 160, lot CFR Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: Cost: 0 Terms: - -BABCOCK 1998 STENTER width 2,60 En - 6 chamber leaning chain,pin, heating with oil, mahlo+fular Brueckner Reference: Cost: 0 Terms: - -1 BRUCKNER stenter year 2001, max. working width 3200 mm, horizontal combined chain pins/clips, 8 bays, 2x8 gasburners, 4x8 ventilators, input length 5 meter with photocells E+L and 3-finger-uncurlers and extensioning rollers, with at INPUT : J-box + brushing device + WEKO humidification + chemical padder BRUCKNER 2 bowls + Autofoam Datacolor coating device + Mahlo RFMC10A with 6 heads, and at EXIT : Mahlo weft-reading device + plaiter + batching on A-frame.

3 Reference: Cost: 0 Terms: SEE -1 BRUCKNER stenter year 2001, max. working width 3200 mm, horizontal combined chain pins/clips, 8 bays, 2x8 gasburners, 4x8 ventilators, input length 5 meter with photocells E+L and 3-finger-uncurlers and extensioning rollers, with at INPUT : J-box + brushing device + WEKO humidification + chemical padder BRUCKNER 2 bowls + Autofoam Datacolor coating device + Mahlo RFMC10A with 6 heads, and at EXIT : Mahlo weft-reading device + plaiter + batching on A-frame. Price: EUR /- CNF VALUE Reference: Cost: 0 Terms: - -1 STENTER BRUCKNER MACHINE WIDTH 3.60M YEAR 1985 Details: 4 Chambers Gas System Reference: Cost: 0 Terms: - -BRUCKNER STENTER FRAME WW 36000MM YEAR 2002 GAS YEAR: 2002 MODEL: SPLIT-FLOW ROLLER WIDTH: 3800M WORKING WIDTH: 3600MM 7 CHAMBERS NATURAL GAS HEATED MECCANICA TESSILE I-SCRAY FOR N STOP OPERATI AT THE ENTRANCE AND EXIT BETA PADDER TYPE FPC-3 TAV-3800 MAHLO WEFT STRAIGHTER AT ENTRY WITH 6 READING SENSORS OPERATOR'S PLATEFORM OVERHEAD CTROL BRIDGE WITH TEMPERATURE CTROLS AND MITORS FOR QUALITY CTROL WATCH SET OF GUIDE ROLLER AND SCROLL ROLLERS FABRIC ENTRY TO CHAIN WITH 3 FINGER UNCURLERS E&L OPTOELECTRIC EDGE GUIDING CAMERAS TYPE FR1501 ENTRY PRE-ARRANGE FOR WOVEN AND KNITTED FABRICS MOTORIZED BRUSHES FOR PIN AND CLIPS CLEANING STAINLESS STEEL CENTRAL SUPPORT FOR SENSETIVE FABRICS PRE-STEAMING TRAY EACH CHAMBER WITH 2 BRUCKNER ECLIPSE HIGH PERFORMANCE BURNERS, 240 KW EACH DOUBLE VENTILATI IN EACH CHAMBER TYPE SPLIT FLOW COOLING ZE AT EXIT WITH FAN AND MOTOR MAHLO WEFT STRAIGHTNER AT EXIT WITH 4 READING SENSORS AIRING ZE AT EXIT EXIT WITH BIG BATCH WINDING UNIT INVERTER PLC CTROLS, 380V, 50HZ HEAT RECOVERY AND AIR TREATMENT SYSTEM SUPERB CDITI. MAINTAINED LY WITH GENIUN BRUCKNER PARTS

4 Reference: Cost: 0 Terms: - -1 Bruckner mini stenter, w.w. 260 cm, 7 m long, yoc. 1987, Reference: Cost: 0 Terms: SEE -1 BRUCKNER stenter year 2000, rollerwidth 3600mm ww 3400mm, 5 bays gasheated, burners renewed in and machine overhauled in 2011, vertical pinchain, long entry 5 meter with Tendematic uncurlers, Corino guiding system, with at entry : 2 padders each 2 bowls + Mahlo RFMC12A + washing compartment with 4 perforated drums, exit with edge-cutting and batching motion and plaiter, machine suitable for woven as well as for knitted fabrics. Price: Euro /-- CNF, NET to us. Reference: Cost: 0 Terms: SEE -BRUCKNER STENTER BRAND NAME : BRUCKNER YOC : 1997 WORKING WIDTH : 2.60 cm ROLLER WIDTH:2.90cm 6 CHAMBERS PIN TYPE GAS HEATED WITH GLUEING,CUTTING AND SUCTI DEVICE. FOR KNITTED FABRIC. PADDER ( FULLARD ) : ORGINAL BRUCKNER WITHOUT WEFT STRAIGHTNER EXCELLENT CDITI, LYING IN FACTORY NOW. STOPPED 3 MTHS IN FACTORY. PRICE: EUR FOB

5 Reference: Cost: 0 Terms: Maker : Bruckner, Germany. -Yom : 2,000 yeare. -Roller width :3,600 mm. -Working width :3,400 mm. - Nos, of chamber : 8 chambers. - Gas heating system. -Horizontal Pin chain type. - * Composed of following parts. - Bianco entry, Model Linea entrate ram. - Traction unit with compensator, - J-Box accumulator with traction roller. - Dogal centering unit with motorized spanders roller. - Foulard 2 rollers with pneumatic pressure. - VDTEX weft-straightener with 8 heads, - E+L digital introduction, automatic overfeed. - 6 meters entry. - Bruckner eclips burners. - Automatic regulation of chain width. - Cooling units. - MAHLO humidity control. - Exit by BIANCO, model linea Uscita Ram. - Big batcher for A-frame with double position. - AC inverter controlled. - Total length 58 meters. -Location : South Europe. -Available : immediately. -Condiotions : stand on mill floor. If interested, please contact us for more details.

6 Reference: Cost: 0 Terms: Maker : Bruckner, Germany - Yom: : 2008 years. - Roller width : 3,000 mm. - Working width : 2,800 mm. - Nos, of chamber : 8 - Heating source : thermal oil. - Chain system : Horizontal pin chain conveyer. - Complete set with standard accessories. A, Entrance ( texter guider ) B, Two bowl padding mangle. C, Weft-straghtner ( Mahlo, Italy ) D, Rail guider F, Aigle coating head. G, operating control board. H, 8 set x Hot air circulation I, Air cooling device. J, water cooling cylinder. k, plate device and batching device. l, control panel - Location : China - Condition : stand on mill floor.( This stenter is running whenever received a order, accordingly, The actual running time of this stenter is 3 years only ( 8 hour /day) - -Available : immediately. Dilmenler Reference: Cost: 0 Terms: - -DİLMENLER STENTER Year Wıdth mm Heating gas Borner brande ---teplix Chambers unıt Squessıng fular Pin and chaın

7 Reference: Cost: 0 Terms: SEE -STENTER DILMENLER MODEL YEAR 2007 W.V 3400 MM 8 CHAMBERS GAS AND GAS SYSTEMS MAHLO AND PADDER PIN AND CLIPS SELVEDGE CTROL ERLATH LEIMER OUTLET UN IT BIG BATCHING AND PLAITER EX MİLL EURO EH-HWA

8 Reference: Cost: 0 Terms: - -: Used EH- Wha Gas Stenter. -Maker: EH-Wha, Korea -Yom :April, 2,008 years. -Model: Platinum -Serial number: 10ch-2BM-TOH-PHR nos,of chamber: 10 -Roller width:3,600 mm. -Working width:3,400 mm. -Horizontal chain pin type. -Machine speed: 80~,100m/min -Gas heating system ( burner,.maxon,usa) -electric power 3 Phase x :60hz x 380 v. - Inverter driving system. 1, entrance : a, guide ring B, Tension bar C, textar guider D,2 bowl padding mangle 2, Auto Overfeed :a,electronic control type overfeed device B,Rail guider with automatic position control dectector. C, selvedge uncurler. D, over feed tensioner. E, selvedge keeper. F, Rail safety device. G,Screw expansion roll H, Touch screen T.V monitor system. 3, Dry & Heat Setting Chamber :a, 10 x Hot air circulation Fan & motor B, Air floating system hot air injection nozzle C,heating exchanger. D, exhaust duct with fan motor. E, 10 x gas burner ( Maxson, USA) 4, Cooler : air cooling fan & nozzle 5, Main Drive: a,driving arrangement. B, 2 x bowl cooling cylinder. C, Plaiting down device 6, Main control panel. -Condition: Now running -Available : immediately -Location: Korea Ewha

9 Reference: 9573 Cost: 0 Terms: SEE -Ewha Stenter machine - Brand : Ewha Korea - Yom: 1998 (Fully reconditioned 2004) - Roller width:2,600 mm. - Working width: 2,400 mm. - Chamber No: 8 chambers - Horizontal pin type chain. - Thermo-oil heating method. - complete set with standard accessories. * Consisted of following parts. entrance with guide roller. 2 bowl padding mangle. Control screen board. - 2 bowl cooling cylinder. - plaiter. - Inverter system - Control panel Motor Year : 2004 (all) *Quantity: 1 set. Condition: Running Location: Vietnam Price: US$ 40,000.00/set Ex mill. Famatex Reference: Cost: 0 Terms: - -FAMATEX STENTER FAMATEX STENTER,3.20M, 6 CHAMBERS, HORIZTAL CHAIN WITH PIN AND CLIPS, PADDER WITH 3 BOWLS, WEFTSTRAIGHTENER MAHLO WITH 8 HEADS, CENTRAL BURNER LAUDATI(FROM 2004), OUTLET BY FOLDER AND BIG ROLL. Harish

10 Reference: Cost: 0 Terms: - -Type Stenter Producer Harish YOC 2000 Production No.: P SECD HAND MACHINES Dimension ( mm ) x x Working width ( mm) Drying medium Gas Machine contains: 1) Equipment for drawing-in and balancing of fabrics BIANCO 2) Fular for coating of finish 3) weft straightener MAHLO type RFMC 10 A 4) 5- drying chambers with WEISHAUPT turner (output 6O 335 kw,press mbar 5) wind of arm 6) Kitchen for preparing of finish speed 5-50 m/min elektricity : 220/380 V, 50 Hz The machine worked up to the July 2012 and is at very good condition. Reference: Cost: 0 Terms: - -Type Stenter Producer Harish YOC 2000 Production No.: P Dimension ( mm ) x x Working width ( mm) Drying medium Gas Machine contains: 1) Equipment for drawing-in and balancing of fabrics BIANCO 2) Fular for coating of finish 3) weft straightener MAHLO type RFMC 10 A 4) 5- drying chambers with WEISHAUPT turner (output 6O 335 kw,press mbar 5) wind of arm 6) Kitchen for preparing of finish speed 5-50 m/min elektricity : 220/380 V, 50 Hz The machine worked up to the July 2012 and is at very good condition. Icomatex Reference: 4119 Cost: 250,000 Terms: EACH, EURO, CNF IL Sung Sun 1 ICOMATEX stenter year 2010, working width 3200 mm, 5 compartments, vertical pinchain, gasheating, Mahlo weftstraightener RFMC-76 renewed in 2010, Babcock padder 2 cylinders renewed in 2010

11 Reference: Cost: 0 Terms: - -ILSUNG STENTER YEAR SL/ 0050 ILSUNG 'SUN-SUPER' STENTER MODEL : ISST-8GP NO.OF CHAMBER : 8 ROLL WIDTH :3,600MM WORKING WIDTH : 3,500MM MAX. HEATING SOURCE : DIRECT GAS HEATING (2 BURNERS/CHAMBER) CHAIN TYPE : HORIZTAL PIN LY TYPE MFG YEAR : 2013 INCLUDING; 1) 2BOWL PADDER MANGLE 2) AIR DANCER & COMPENSATE DANCER 3) WEFT STRAIGHTNER (DAEIL, KOREA) WITH TOUCH SCREEN 4) CENTER CVEYOR 5) ILSUNG DECURLER 6) EXHAUST INVERTER CTROL 7) PLAITING & BATCHING WIDTH BANANAS ROLL & TRAVERSE 8) GUIDER ROLLERS FOR DOUBLE DECK Kleinewefers Reference: 9314 Cost: 0 Terms: - -KLEINEWEFERS Bicoflex FQ 245 cold-winding dyeing machine Producer: Kleinewefers KTM, Germany Type BICOFLEX FQ245 Year: 1999 ; Working width: 2600 mm Kranz

12 Reference: Cost: 0 Terms: SEE -Krantz Oil Stenter. -Maker: Krantz, Germany -Yom: 1994 years. -nos,of chamber: 6 -Serial number: Roller width:3,000 mm. -Working width: 2,800 mm. -Vertical chain pin type. -thermo oil heating system. -with Tandermatic device. -Selvedge cutting device. -electric power :60hz x 220 v. 1, entrance texture guider( Bianco) 2, 2 bowl padding mangle :Babcock,1994, type:5805 3, J box 4, texture guider. 5, Screen control board. 6, 6 dry chamber 7, cooling fan 8, Down Plaiter 9, control panel. -Condition: Now running -Available : end of December,2012. Reference: Cost: 0 Terms: SEE -1 KRANTZ stenter ww 3000 mm, model K10 year 1989, vertical pinchain, 6 compartments, heating by thermo-fluid, with boiler for thermo-fluid CSC model LM Kcal with fuel burner Price: Euro /--CFR major seaport Reference: Cost: 0 Terms: - -KRANTZ STENTER WW 3000 MM, MODEL K10 YEAR 1989, VERTICAL PINCHAIN, 6 COMPARTMENTS, HEATING BY THERMO-FLUID, WITH BOILER FOR THERMO-FLUID CSC MODEL LM KCAL WITH FUEL BURNER. Kuesters

13 Reference: Cost: 0 Terms: - -Thermo sol dyeing machine roller width 3400mm WW 3200mm yoc 2005 No 1 high entry with j.scray in cloth guider E+L type No 2 kuster dyeing pader with cooling cylinder No of 2 pader of type cooling jacket Automatic total colors dosing system by dosing pump with colors tank total pipe Line By s s & PLC control with touch screen with j.scray and fabric over feeding device No 3 Inferred make maxon No of 2 natural gas heat system I R design type by mettle Matrix total heat control system by operate PLC control by kuster dyeing pader With thermo sol machine No 4 If they you are working by independently dyeing pader and I R only by fabric Dyeing process so machine is facilitate by original system the batcher drive & Running the machine without working by curing chamber. No 5 Machine heat sources by thermo oil 2 chamber curing system & 2 chamber hot Flue uniform machine humidity control by mahlo system machine at exit j.scray two cooling cylinder by S S diameter 800mm machine exit folder book and batcher drive machine. Machine is like new. Monfort Reference: 8145 Cost: 0 Terms: Monfort stenter frame type Montex mm working width y.o.c chambers heated by indirect diatermic oil ( heating system can be also by gas just changing the main boiler Bianco expander at inlet position Foulard Monfort E & L centering device Mahlo weft straightner Pleva gravimat to measure the fabric weight gr/m2 Orizontal needle chaine Location: Schengen Delivery: Ready Machines: On Mill floor Price: on request Pictures: attached Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

14 Reference: Cost: 0 Terms: Maker : Monforts -Year : Q'nty ; complete 1 set -6 chamber -Width : 180" ( 4,600 mm) -Thormo oil -Pin type -Normal Running now. ************************************************************* -Picture : Attached file. -Inspection : Available -Delivery : After receive advance or L/C, We can loading within max 1 month. -Picture : Attached file. -Etc 1) we need 10 container( 40 ft ) for loading 2) If possible, Pls decide asap. -Payment term : Advance 30% by T/T and 70% Irrevocable L/C at sight -Location : Korea Reference: Cost: 0 Terms: - -****THIS MACHINE IS IN FIRST CLASS CDITI**** MFORT STENTER, MODEL: MTEX, WW: 3.200M, YEAR 1995 PRE TENSI ENTRY WITH E+L CENTRALISING & SCROLL ROLLERS MAHLO AUTOMATIC WEFT STRAIGHTNER, MODEL: ORTHOMAT FMC-9H, WEFT DETECTI AND CTROL UNIT MAHLO FMC-9, WEFT-LINE LOGGING SYSTEM TYPE RVP-2 YEAR 1996 MAHLO TEXTOMETER, MODEL: RMS MODULE, TYPE EMC-9R, MOISTURE MEASURING AND CTROL UNITMFORTMATIC MAHLO ANTISTAT TYPE: AMW-2, HIGH-EFFICIENCY IIZATI ANTISTAT ALL CTROL PANELS MOUNTED IN E AIR CDITIED ENCLOSURE MFORT 2 BOWL FINISHING PADDER EDGE GLUEING DEVICE EDGE CUTTING DEVICE TENSILESS CTROL FOR KNIT AND WOVEN TANDERMATIC EDGE UNCURLER AND E+L FR15 GUIDER HORIZTAL PIN & CLIP CHAIN 7 HEATING CHAMBER BY THERMO OIL COOLING ZE EXIT WITH PLAITER AND BATCHER Reference: Cost: 0 Terms: - -MFORT MTEX STENTER WW 3200MM YEAR CHAMBER OIL HEATED MFORTS TENTER FRAME, MODEL MTEX, YEAR 2006, WW 3.2 M, ROLLER WIDTH 3.4 M KUSTERS FOULARD, MODEL , WITH SQUEEZING UNIT, HORIZTAL PIN CHAIN 6 COMPARTMENTS, OIL HEATED, EXIT WITH 2 COOLING ZES (FANS)

15 Reference: Cost: 0 Terms: - -Maker : Monforts -Year : Q'nty ; complete 1 set -6 chamber -Width : 180" ( 4,600 mm) -Thormo oil -Pin type -Normal Running now. 1) we need 10 container( 40 ft ) for loading Payment term : Advance 30% by T/T and 70% Irrevocable L/C at sight -Location : Korea Reference: Cost: 0 Terms: - -Model Monforst Year 2007 Working Width 3.2 m, Roller Width 3.4 m Feed from A-Frame, High Entry E&L Fabric Guiders Kusters Impregnation Foulard, Model , with Squeezing Unit Corino Weft Straightener, Model KM2-MG6, 6 Cells Horizontal Pin Chain 6 Compartments, Oil Heated Exit with 2 Cooling Zones (Fans) Delivery to Plaiter Controls Qualitex

16 Reference: Cost: 0 Terms: SEE Revized 1 Monforts Tenter Frame Model Montex Year 2006 Working Width 3.2 m, Roller Width 3.4 m Feed from A-Frame, High Entry E&L Fabric Guiders Kusters Impregnation Foulard, Model , with Squeezing Unit Corino Weft Straightener, Model KM2-MG6, 6 Cells Horizontal Pin Chain 6 Compartments, Oil Heated Exit with 2 Cooling Zones (Fans) Delivery to Plaiter Controls Qualitex Available:Immediately Location: Mediterranean USD cfr 1 Kusters Calander Model Year 1987 Working Width 2.8 m, Roller Width 3.0 m E&L Fabric Guiders Metal Detector Top Cylinder Steel Middle Cylinder Racolon Bottom Cylinder Cotton Pressure 60 tons Oil Heated Available: Immediately Location: Mediterranean 1 Monforts Sanforizer Model FF KSG-2 Year 1986 Working Width 2.8 m, Roller Width 3.0 m Fabric Reserve Entry Unit E&L Fabric Guiders J-Schray Steaming Chamber Mahlo Weft Straightener, 6 Cells Mini Tenter, Model TMSB Horizontal Clip Chain Sanforizing Rubber Palmer, model FK/SG-2, Diameter 2.0 m Cooling Cylinder J-Scray Exit Unit Delivery to Batcher or Plaiter Available: Immediately Location: Mediterranean

17 Reference: Cost: 0 Terms: SEE -Monforst STENTER(FOR WIDE FABRIC) Oil heated 380 cm ww 4 chambers For wide fabric and especially for carpet process yoc. Horizental chain. Weftpadder PRICE: eur/each EX.WORK Reference: Cost: 0 Terms: SEE -1 Monforst Montex 8G/K 320 Cm Stenter Machine Lines for processing of Curtain Tensile Oven Montex 8 G/K, Hot Oil Heaters, Horizontal Pin Chain, Mahlo Weft Straightener, With 4 Cabin, Sistem Latch Needle, Machine No-63310, Year 1988, with Display : informatics monfor -matic 2 BOILER OIL HEATER-KUS KESSEL 1 x Oil Boiler Make KUS KESSEL+ Oil Tank 150 GL -Year 1987, -Type KH 1,25/25, -allowable operating pressure: 10 bar -Operating temperature: 300 C degrees - Minimum flow rate: 95 m 3 / h - Power : 1453 kw - Minimum flow rate: 95 m 3 / h - Manufacturer Nr : Model Features: ZU 250/1 - Factory - No Location : Yugoslavia Delivery : Immediately Price : in Complete euro loaded in container Reference: Cost: 0 Terms: - -Monfort stenter machine yoc 2006 Monfort stenter machine yoc chamber roller with 3400mm WW 3200mm horizontal pin clip chain heat sources by thermo flued machine high entry with j.scray over feeding roll 2 bowl pader mangle type m 15 & infrared duble l by maxsone type matle matrix with Eveck system mahlo weftstrainter 8 opitical I machine over feeding brushing eadhe control by E+L photo cell and exit side mahlo artho met control heat sources control by 3 way motorize valve with pleva humidity control No of 2 exost fan machine folder book batcher with exit j.scray with cooling cylinder

18 Reference: Cost: 0 Terms: - -Monfort stenter machine 2005 Monfort stenter machine yoc 2005roller width 3400mm WW 3200mm type horizontal pin clip chain entry 3mt 8 chamber heat of sources thermo oil entry j.scray pader mangle 2 bowl mahlo weftstrainter entry & exit arthomet control machine with evake system over feeding brushing twin ear heat comburshan system machine exit side j.scray folder book and batcher system. Reference: Cost: 0 Terms: - -STENTER MFORTS "MTEX 5000", 5 chambers (2 bays year 1997 and 3 bays year 2010) - combined chain pins-clips, 5 gasburners Maxon, axial rolling unit at exit, with STORK foam-generator FPC year 1996 cap. 600 liter Reference: Cost: 0 Terms: - -Monforts Stenter Yoc 1989 Width chambers Gas heated Pin clip horizontal chain Mahlo Weft Straightner Monforts Padder Infra Red Monforts on Entry Exit With Batcher Reference: Cost: 0 Terms: - -STENTER MFORS MTEX units Year 1996 Type montex 8 F twin air Oil heating system Serial no : 45 T Width :3000mm Working width:2900mm Entry J box Kusters padder Weft straighter :MAHLO 8 chamber Horizantal pin &clips Two air cooling drums Fabric accumulator---double batcher

19 Reference: Cost: 0 Terms: - -STENTER MFORS MTEX units Year 1996 Type montex 8 F twin air Oil heating system Serial no : 45 T Width :3000mm Working width:2900mm Entry J box Kusters padder Weft straighter :MAHLO 8 chamber Horizantal pin &clips Two air cooling drums Fabric accumulator---double batcher Monti Reference: Cost: 0 Terms: - -COMPARTMENTS (2 m EACH E) VERTICAL RETURN CHAIN SINGLE LAYER STENTER MADE BY MTI TYPE MTIRAMA FOR KNITTED FABRIC, year of construction 2000, roller width mm for max. fabric width mm, steam heating of the dryer, suitable just for open width knitted fabric, 01 pair of gluing devices and 01 pair of selvedge trimming devices. Multiple

20 Reference: Cost: 0 Terms: SEE -ALL 3 FRAMES FOR A TOTAL PRICE OF USD 250, LOADED TO YOUR CTAINERS, USA 1 DR Kenyon Pin Tenter 280cm Working Width Year 1993 Menzel Two Roll Feed with J Scray Kusters Dye Pad type Mascoe Coater 100 Pre Dryer 8 Zone Gas Fired Oven Menzel 3 Roll Automatic Batcher Controls 1 DR Kenyon Pin Tenter 400cm Working Width Year 1993 Menzel Two Roll Feed with J Scray Coating Unit with Foam Generator 5 Zone Gas Fired Oven Menzel 3 Roll Automatic Batcher Controls 1 Babcock/Artos Tenter Frame 320cm - (Refurbished / 1998) consisting of: Menzel J Scrays One Skyed Turning Roll, 6 diameter with E&L air guiders, Babcock Pad / 134 wide Vacuum slot, 128 wide Mt. Hope Weftrol Weft Straightener, Windsor & Jerauld Clip Chain Set E&L 2 finger uncurlers, Babcock Oven / 60 long 6 Burners12 fans New York Blower A-frame winder, Birch Brothers single blade slitter Year 1998 Menzel 2 roll compensator,134 Type 134CP Year 1990 Artos 4 Section Control Panel with 6 zone control Your consideration and prompt response will be most appreciated. Reggiani

21 Reference: Cost: 0 Terms: - --REGGIANI STENTER FRAME- REYNOLD - Reggiani Macchine - Model Reynold - Working width 2500 mm - Clips and pins chaini - 6 compartments Gas heating - Beta impregnation foulard with squeezing unit - Mahlo weft straightener - Exit roll Stentex Reference: 9062 Cost: 0 Terms: SEE -STENTEX 1 SET, 1995 MODEL, STENTEX MARKA, 320 CM WIDTH, 6 CHAMBERS, HEATING WITH NATURAL GAS, MAHLO FULARD,VERTICAL CHAIN PRICE : EUR. Reference: Cost: 0 Terms: Stentex Stenter Frame Type Stentotherm 3300 Year 1996 Working width 1800 mm Roller width 2000 mm 9 Compartments vertical Pin Chain gas heated with MAX Burners with 2 Foulards with MAHLO Weft straightener Reference: Cost: 0 Terms: SEE - STENTEX 1995 MODEL 320 WORKING WIDTH 6 CHAMBERS HEATING WITH NATURAL GAS MAHLOFLOUARD VERTICAL CHAIN EURO EX.WORK