PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

Transcription

1 Machinery Listings Finishing Artos -ARTOS BABCOCK STENTER YEAR: 1995 ROLLER WIDTH: 1800MM 8 CHAMBERS OIL HEATED HORIZTAL PIN/CLIP CHAIN 2 BOWL PADDER MAHLO WEFT STRAIGHTENER YOC COOLING ZE EXIT PLAITER & BATCHER. Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: Cost: 0 Terms: SEE 240,000 USD FIANL PRICE / cnf Reference: Cost: 0 Terms: SEE -STENTER FRAME, 6 CHAMBERS, STEAM HEATED, HORIZTAL PIN & CLIP CHAIN (NO PINS INSTALLED), PADDER, WASHING LIEN WITH 4 WASH BOXES MAKE: ARTOS ROLLER WIDTH: 1800 MM Y.O.C.: 1968 / 1971 / COMPLETE REVISED 1999 / ALL MOTORS INVERTER CTROLLED!!! CNF karachi Price euro Reference: Cost: 0 Terms: - -1 ARTOS stenter 5 bays, working width 1800mm, year 1976, gasheated, h oriz. pinchain, with squeegee at entry for coating (F.R. cotaing), with 2 MAHLO weftstraighteners RFMC 94H year mm - 4 heads.

2 Reference: Cost: 0 Terms: SEE -- 1 x stenter Artos, Type 5003 Year 1974 ww 180cm, Serial number715xx with weft straightener Bainco 1998, foulard Elitex 1984, padder Artos type 5805 steam heating horizontal chain with vertical pins 8 chambers Unroll and roll device Artos Speed : m/min still running Price : ,- EUR mill floor Babcock Reference: Cost: 0 Terms: SEE - 1 Babcock Stenter Frames Type 5300 Year 1992 Working width 1800 mm Roller width 2000 mm 10 Compartments vertical Pin Chain gas heated each with 2 Foulards each with REY-TEX Weft straigthener Price: F.O.T. EURO 95,000.00

3 Reference: Cost: 0 Terms: - -BABKOCK Stenter 5001 / 180 / 6 / Gas. 01 Stenter Babkock / Germany Chambers: 6 Working width : mm YOC: 1993 Heating system: Gas Chain: Pin & Clip Chain horizontal Entry with high inlet from A-Frame Compensator Padder BETA / 3 Bowls Weftstraightener MAHLO RFMC 94 Operating bridge Inlet field 3 meter 6 Chamber Gas heated heta setting Exit with Cooling system Batching unit Condition: On Mill floor Delivery: immediate Price: Upon request Location: Italy Reference: Cost: 0 Terms: - -1 Multilayer Stenter Frame make Babcock year of construction 1985 size x mm 5 chambers Working width mm 6 passages By steam Speed from 5 up to 75 mt/minute Pin with chains With Foulard squeezer TMT model Equpressione F3C of year 2003 complete with electrical panel and all pieces and accesories. Price and pictures available upon request. MACHINE AVAILABLE IMMEDIATELY.

4 Reference: 4798 Cost: 165,000 Terms: EACH, BABKOCK Stenter 5001 / 180 / 6 / Gas EURO, MILL FLOOR. 01 Stenter Babkock / Germany Chambers: 6 Working width : mm YOC: 1993 Heating system: Gas Chain: Pin Chain horizontal Entry with high inlet from A-Frame Compensator Padder BETA / 3 Bowls Weftstraightener MAHLO RFMC 94 Operating bridge Inlet field 3 meter 6 Chamber Gas heated heta setting Exit with Cooling system Batching unit Condition: On Mill floor Delivery: immediate Price: Upon request Location: Italy Reference: Cost: 0 Terms: - -2 Stenter Frames - Babcock made in Germany yoc 1 x 1995, 1 x: chambers, oil heated, ww. 180 cm, max. width 2 meter, working with pin chain (horizontal), Mahlo weft straightener, padder like new, in excellent running condition, with weft straightener, 380 Volt, 50 Hz. delivery immediately both stenters are highly suitable for knit fabrics as well as woven. Benninger Reference: 7592 Cost: 0 Terms: - Benninger BICOFLEX Roller width: mm Max. Fabric width: mm Yoc: 2001 Entry: from Plaited position Fabric edges guider Bicoflex dyeing padder Exit with Batching Arm on A Frames Including Chemical preparation Vat and pump Condition: On Mill floor Delivery: May 2012 Price: Upon request Location: Europe / Schengen Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

5 Reference: Cost: 0 Terms: - -Benninger BICOFLEX Roller width: mm Max. Fabric width: mm Yoc: 2001 Entry: from Plaited position Fabric edges guider Bicoflex dyeing padder Exit with Batching Arm on A Frames Including Chemical preparation Vat and pump Condition: On Mill floor Delivery: May 2012 Price: Upon request Location: Europe / Schengen Benz Reference: Cost: 0 Terms: SEE Brueckner -Laboratory Stenter BENZ, type TD, machine No , Y.O.M. 1975, for sample cloths of 35-40cm, up to 250 C, temperature and time control 2100 Euro, FOT Reference: 7315 Cost: 0 Terms: SEE 1 BRÜCKNER stenter year 1997 reconditionned in 2006, fabric width 1800 mm, entry with BETA padder 3 bowls differential pressure, extensionning rollers, Bianco weftstraightener Digitex 80R with 6 heads, entry length 4.5 meter, 5 chambers gasheated, vertical pinchain, 10 gasburners, cooling zone, batching motion and plaiter at exit. Price: Euroi /-- CNF Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 4792 Cost: 93,000 Terms: EACH, EURO, CNF 1 BRUCKNER STENTER, year 1983, 9 chambers, gas heated, entrance j box, with Artos padder 1970, Bianco weftstreightner at the entrance and exit, pin clip, working width 180 cm, exit big batcher and falding.

6 Reference: 9246 Cost: 0 Terms: SEE -Brückner RAM (Stenter) 1990 model 7 Chambers 180 cm working width Gas Heating Mahlo foulard Price: USD EXW FOB

7 Reference: Cost: 0 Terms: SEE 1996 model 220 working width 8 chambers with natural gas mahloflouard pin+clip Weft Straighner padder,including In Running Conditions Price: euro EXWORK Brückner 2000/190 6 Chambers 2000 model 6 chambers 190 working width,oil Heated,Mahloflouard,pin+clip In running conditions Price: euro CNF Sunsuper Stenter/190 width 1994 model 6 chambers 190 width Natural gas system, mahloflouard,pin+clip 2011 reconditioned working condition now. Weft straighner,padder Price: euro CNF New Offer Brückner Stenter 2001/240 9 CHAMBERS 2001 model Pin+Clip 9 Chambers Oil Heated 240 cm work width Mahlo Foulard Side Cutting VecoAutomatic Package Price: EUR CNF Brückner 2001 Model 7 chambers,oil heated. Horizental chain working width. Pin+clip. With mahloflouard It can work for both knitting and weaving fabric. Price: Euro Ex.work In addition to list below We have; 1995 brückner with 5 chambers, Vertical chain,oil heated Including padder and weft straightener Working width: cm Price: dollar EXWORK Remark:Pictures are upon request... Brückner Stenter 1995 model/240 vertical chain 1995 model 6 chambers 240 -working width mahlo flouard,clips. Vertical Chain so especially for knitting fabrics.

8 With natural gas but our technical staff will exchange it to oil heated system after deal,we will give you %100 working gurantee. Price: euro EXWORK BRUCKNER RAM STENTER 1990 MODEL 8 CHAMBERS 185 WORKING WIDTH WITH NATURAL GAS MAHLOFLOUARD HORIZENTAL CHAIN WITH PIN DISMANTLED IN FACTORY IT COULD WORK WITH NATURAL GAS AND WITH OIL HEATED AT THE SAME TIME. -Price: DOLLAR FOB BRUCKNER,BABCOCK,STANTEX,MFORTS RAM MACHİNES... BRUCKNER RAM 2004 MODEL 6 CHAMBERS 2.40 WORKİNG WIDTH WITH NATURAL GAS MAHLOFLOUARD EURO EX.WORK MFORST RAM 2000 MODEL 8 CHAMBERS WITH NATURAL GAS 2.40 WORKING WIDTH MAHLOFLOUARD PIN+CLIP EURO CNF STENTEX 1995 MODEL 320 WORKING WIDTH 6 CHAMBERS HEATING WITH NATURAL GAS MAHLOFLOUARD VERTICAL CHAIN EURO EX.WORK BRUCKNER RAM STENTER 1990 MODEL 7 CHAMBERS 180 WORKING WIDTH NATURAL GAS MAHLOFLOUARD DOLLAR EX.WORK STANTEX RAM(STENTER) 1998 MODEL 12 CHAMBERS 200 CM WORKING WIDTH NATURAL GAS-WILL BE INFORMED IF YOU HAVE INTEREST MFORST 1977 MODEL 6 CHAMBERS 180 WORKING WIDTH-WILL BE INFORMED IF YOU HAVE INTEREST SUNSUPER 2003 MODEL 7 CHAMBERS OIL HEATED 3.20 WORKING WIDTH-WILL BE INFORMED IF YOU HAVE INTEREST BABCOCK RAM 1997 MODEL 6 CHAMBERS OIL HEATED 2.30 WORKING WIDTH EUR EX.WORK MFORST RAM 1996 MODEL 8 CHAMBERS OIL HEATED 240 WORKING WIDTH EUR EX.WORK BABCOCK RAM 1998 MODEL 8 CHAMBERS NATURAL GAS 220 WORKING WIDTH EUR EX.WORK BABCOCK RAM 1994 MODEL8 CHAMBERS OIL HEATED 220 WORKING WIDTH EUR EX.WORK BABCOCK STENTER 1996 MODEL 8 CHAMBERS 240 WORKING WIDTH WITH NATURAL GAS EUR EX.WORK MFORST STENTER 1996 MODEL 6 CHAMBERS 240 WORKING WIDTH FOR KNITTING FABRIC OIL HEATED EUR EX.WORK Reference: Cost: 0 Terms: - -BRUCKNER, CHAMBERS, OIL CIRCULATI SYSTEM, MAHLO WEFT STRAIGHTNER, PIN & CLIP CHAIN SYSTEM, OPERATING, 380/50

9 Reference: Cost: 0 Terms: SEE -Brückner Single Layer Stenter Year of Construction 1996, Roller Width mm for a Max. Fabric width: mm 01 Fabric entry assembly consisting of 01 Frame with relevant device Suitable to take over the fabric from trolley or big roll, 01 System in Combination, including: 01 Double Spreader Roller,01 centering cylinder type Dogal and relevant sensor. 01 Second Hand 02 Rollers Impregnation Padder Year of construction Optical Weft Straightener made by Mahlo type FMC year of construction Brückner Vertical Return Pin -chain including 01 Anti - Depinning Device each Link, Left and Right Chain are driven by means of 01 Electrical Motor, Frequency Converter Controlled, left and right overfeeding device at the Entrance. Each Overfeeding device is Controlled by means of Frequency Converter, Length of Entrance Field: 3 m, Length of Exit field: 4m, Dryer Consisting of 05 Compartments ( 3 meter each one ), 01 Heating System of the Dryer by means of Oil Heating Exchangers, 02 Air Circulation Fans each Compartment with Motor of Ventilator at 02 speed, 01 Plaiter at the Exit Auto-pilot Control System made by Mahlo type Permaset for an Automatic Thermo - fixation of the fabric. Probes made by Mahlo installed inside the Dryer, Exhaust Fan motor at 02 speed, The above mentioned stenter is in a very good condition and is visible running in Italy Eur ex mill floor Order 30%. 70% wire transfer no later than 30 days from order disassembly and shipment from August onwards. Location- ITALY- Photos & Other Technical details upon Request- Reference: Cost: 0 Terms: - -E SECD HAND BRÜCKNER SINGLE LAYER STENTER year of construction 1996, roller width mm for a max. fabric width: mm 01 fabric entry assembly consisting of 01 frame with relevant device suitable to take over the fabric from trolley or big roll, 01 system in combination, including: 01 double spreader roller,01 centering cylinder type Dogal and relevant sensor. 01 second hand 02 rollers impregnation padder year of construction optical weft straightener made by Mahlo type FMC year of construction Brückner vertical return pin chain including 01 anti - depinning device each link, left and right chain are driven by means of 01 electrical motor, frequency converter controlled, left and right overfeeding device at the entrance. Each overfeeding device is controlled by means of frequency converter, length of entrance field: 3 m, length of exit field: 4m, dryer consisting of 05 compartments ( 3 meter each one ), 01 dryer heating system by means of oil heating exchangers, 02 air circulation fans each compartment with motor of ventilator at 02 speed, 01 plaiter at the exit auto-pilot control system made by Mahlo type Permaset for an automatic thermo- fixation of the fabric. Probes made by Mahlo installed inside the dryer, exhaust fan motor at 02 speed,

10 Reference: Cost: 0 Terms: SEE - BRUCKNER RAM STENTER 1990 MODEL 7 CHAMBERS 180 WORKING WIDTH NATURAL GAS MAHLOFLOUARD DOLLAR EX.WORK And Fob price is dollar ex.work Note: You can see in pictures,what type of chain this is very clearly. Reference: Cost: 0 Terms: SEE -BRUCKNER STENTER, year 1982, 6 chambers, horizontal pin chain, gas heating, w.w mm, padder Bruckner 1850 mm roller width, Bianco Weft straightener (reaconditioned by Bianco in 2001), exit A-frame and plaiter, cooling zone Price CNF Euros millfloor Reference: Cost: 0 Terms: - -BRUCKNER STENTER 180CM 2000 MODEL HORIZTAL 6 CABIN OIL HEATED WITH MAHLO & PADDER BATCHING MOTI WITH SHAKING SYSTEM RUNNING AT PRESENT Reference: Cost: 0 Terms: - -1 x Bruckner Stenter, w.w. 160 cm, yoc. 1972, 4 chambers, thermos-oil heated, horizontal pin & clip chain but only clip installed in the machine Dilmenler

11 Reference: 9864 Cost: 0 Terms: - -2 x DILMENLER Stenters YOC 2010 Gas Heated 1 x 8 Chambers 1 x 10 Chambers 1 x DILMENLER Open End Shrinking Machines YOC x DILMENLER Dryer YOC 2006 Gas Heated 4 Chambers Elitex Reference: Cost: 0 Terms: - -ELITEX stenter frame, type: : y.o.c. 1990, modernization icl. rekonstuktion and gas till 2010 Material: weaving and knitting goods Width of goods: 600 mm mm Entry: unwinding of goods from the store or batching Electronic controlled central unwinding extension elements Erhardt + Leimer Foulard: 1 pc double-roller foulard ELITEX Typ Automatic weft straightener: The weft streightener is not a part of delivery - we can supply renewed weft streightener ELITEX Directomat Quatro or another, pls. see pictures - price and details upon request. Chain: Needle with clips including chain lubrication Entry part of the machine:entry Erhardt + Leimer elektric F10 shoulder movement by electric motors controlled by drivers Needling electronically controlled by frequency converters modification for processing knitting ware Cleaning needles during machine operation Drying chamber: ½ pre-drying field 6 drying or fixying fileds 1 cooling field Heating: directing gas heating Eclipse RMHP2-200 (like Brueckner) Output of the machine: Electronic controlled central unwinding, folder Wiring: AC motors controlled by frequency converters Operating computer for drives and gas heating Voltage: 3 x 380 V, 50 Hz In operation: till 2011 PRICE EXW: on demand EUR Famatex Reference: Cost: 0 Terms: - -STENTER FAMATEX, year 1978, 10 chambers, w.w mm, gas heating, padder Kusters, weft straightener MAHLO ( 2005 ) Kranz

12 Reference: 7837 Cost: 0 Terms: - KRANTZ STENTER MACHINE 12 CHAMBERS WW 1800 STEAM HEATED PINS YOC 1988 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7121 Cost: 0 Terms: - KRANTZ STENTER MACHINE 12 CHAMBERS WW 1800 STEAM HEATED PINS YOC 1988 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: Cost: 0 Terms: SEE -KRANTZ K 16 STENTER FRAME, YEAR x KRANTZ stenter frame for carbonizing, dehydrating, impregnating, tensioning, drying, thermal treatment. Model: KM 16, Year of construction: 1996 and 2002, Width: roller width 2000 mm (working width 1800 mm), Gas burners Maxxtron: 6 Technological process: 1 x carbonizing bath, 1 x Krantz padder, 1 x Corino FLC 4, year 2002, 1 X CORINO guiding and uncurlers type K20, year 2002, 1 x BTM (Babcock Textile Maschinen) padder for impregnation, year 2002, 1 x BTM (Babcock Textile Maschinen) padder for impregnation, year 2002, 1 x Corino CORINO Weft straightener mod.normatex SUPER-N, FLC 3, year 2002, Drying with 6 gas burners. Full automation through Lauer PCS 9000 operator panel, Mahlo Permaset VMT dwell-time controller for heat treatment and Thermoset OMT for measurement of fabric temperature. Price CNF main sea ports: Euro New Price CNF main sea ports: Euro Reference: Cost: 0 Terms: - -KRANTZ STENTER, YEAR 1989 W.W MM 6 CHAMBERS DOUBLE DECK FOULARD DELIVERY PLAITER HEATING: STEAM + ELECTRICITY COMPLETE WITH : MENSCHNER SEWING MACHINE IN TUBULAR + INSPECTING MACHINE Mageba Reference: 7235 Cost: 0 Terms: - 1 MAGEBA finishing machine for tapes, year 1998, 2 drums heated electrically, drum diam. 600 mm width 600 mm, finishing/dyeing padder at input, rolling system at exit. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8095 Cost: 0 Terms: - MAGEBA RIBB DYE MACHINE- 1 - Used Mageba ribbon dye range, year 1993, for 5 to 6 strands, overall approximate footprint 63' long x 10' wide with: Entry scaffold & Tension control, pad, Washer with 3 boxes/3 nips Type , Serial No , Contact Dryer Type , Serial number , Dye padder station with add tank, Infrared Dryer Type 32/5806, Serial No , Drum dryer enclosed Type 14/882,Serial No , Five section Washer Type , Serial with 2 wash boxes and 2 nips in tandem with washer Type 31/4030, Serial with 3 wash boxes and 3 nips, Dip for resin application, Contact drum dryer Type , Serial No Mahlo Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

13 Reference: 9245 Cost: 0 Terms: SEE model, 7 chamber, 180 cm working width, Workıng with gas, Mahlo foulard, Price : USD EXW FOB Master Reference: 7272 Cost: 55,000 Terms: EACH, EURO, FOT, 1 Stentering frame MASTER Type: GIUNIE YOC : 2004 Max. Working width: 1800 mm Number of Chambers : 5 Heating System: Gas Chain type: Pin Chain Chambers length: 13 Meter Entry from A Frame or plaited Centering system 5 Chambers Heat setting Exit with 1 Cooling drum Plaiter Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: Cost: 0 Terms: - -BRAND MASTER /ITALY INDIGO DYEING MACHINE PRODUCT YEAR 2008 SIZING BEAM 16 BEAM (AIR BRAKE, CHECKING AUTOMATI FOR TENSI) PRODUCE SPEED 40 mts/min (MICRO SPEED & WORKING SPEED POSSIBLE FOR % 50) PRODUCE SPEED 13 CHAMBER 1th CAUSTIC DYEING OR BOTTOMING SULPHUR DYEING 2. & 3 DYEING CHAMBERS NR (8 th INDIGO DYEING DYEING OPTINAL TOPPING DYEING 10 th DYEING WIDTH 1700 mms CIRCULATI SYSTEM EACH TANK CAN BE DIVIDED BETWEEN EVERY EACH TUB 30 Mt. OXIDATI COMPENSATOR W/CAPACITY FOR 100 Mt. 10 BALABAN GROUP AFTER PAINTING & WASHING 2 DETACHABLE TUBS SIZING, UNREFINED CHECKING DRYERS FOR SIZING. ABILITY TO WORK W/ cms BEAM WEAVING SEPARATELY FOR INDIGO, SULPHUR & CHEMICAL DOSING. Ph and Mv LABORATORY FOR INDIGO Wıth Plc along whole machine strain control Price: euro CNF

14 Monfort Reference: 4799 Cost: 190,000 Terms: EACH, Monforts Stenter "MTEX 7 F TWIN AIR"/ EURO, MILL FLOOR. Monforts Stenter Chambers: 7 Heating system: Gas Chain: Horizontal Pin Chain YOC : 1995 Working width: mm Entry with "J"Box Opening roller: Corino Padder: BETA 3 Bowls Weftstraightener: Mahlo RFCM - 94 H Operating bridge Entry field 3 meter Steam section below 7 Chamber Heat setting Exit with cooling system MAHLO Humidity control EMC-9R Batching system Condition: On Mill Floor Delivery: immediately Location: Europe Price: upon request Reference: Cost: 0 Terms: - - MFORST 1977 MODEL 6 CHAMBERS 180 WORKING WIDTH-WILL BE INFORMED IF YOU HAVE INTEREST Reference: Cost: 0 Terms: - -Short Desc.: Stenter MFORTS type Montex FK gas fired Year: 2002 Brand: MFORTS Reference: Cost: 0 Terms: - -1 Monfort Tenter Frame Year mm Wide Low Profile Clip Chain 8 Zones Gas Fired, 1.5 million BTU Circulation Fans Exhaust Fans Cooling Zone

15 Reference: Cost: 0 Terms: - -MFORTS STENTER FRAME FOR WOVEN AND KNIT FABRICS Year: 1997 Type: Monforts Montex Roller width: 2000mm Working width: 1800mm 8 Chambers, Gas heated Horizontal Combined Pin and Clip chain Composed of: High Fabric Feeding Frame with tensioner E&L Pneumatic Cloth Guiders type KF20 J-Scray Corino Brushing device with suction E&L Pneumatic Cloth Guiders type KF20 3 Bowl Beta Finishing Padder with Pneumatic pressing Mahlo Weft Straightner Platform for operator Overhead Information Bridge with controllers and Display Fabric entry to chain with motorized 3 fingers uncurler Tendamatic attachment for feeding knit fabrics 2nd set of Motorized 3 finger uncurlers E&L Optoelectric Edge Sensors Motorized Brushing for Chain Cleaning 3 meter Entry Zone 8 Chamber Stentering and Setting oven Cooling Zone at Exit Exit with Big batcher or plaiting device Complete Electric Control Cabinet, 380v, 50hz Reference: Cost: 0 Terms: SEE -STENTER make MFORTS, year 1980, working width 1800 mm, 5 chambers, gas heating, horizontal pin chain, cooling zone, exit A-frame. NO padder and NO weft straightener. NOW INCLUDING BIANCO PADDER ( 1990 ) PRICE millfloor EUROS

16 Reference: Cost: 0 Terms: Drying & thermo-fixing line MFORTS yoc 1998 composed of: entry frame with fabric brake adjustable system pneumatic selvedge opener device n. 1 foulard MFORTS 2 horizontal cylinders mod. MATEX rollers 2000mm working width 1800mm impregnation tank control desk weft straightener MAHLO optical heads STENTER MFORTS mod. MTEX 6F Twin Air yoc 1998 Working width 1800mm horizontal pin chain Fabric overfeeding devices 6 chambers gas heated with 6 burners with fan motor Output cooling system Delivery fabric in folding device Exhauster system for exhausted fumes channels for expulsion of exhausted fumes supplied up to the exhauster Electric panel LOCATI: CROAZIA(border of Italy) Reference: Cost: 0 Terms: SEE -MFORST STENTER Monforst cm net work width 6 chambers + 2 chambers drying so totally 8 chambers. Horizental Chain Pin+clip,Mahloflouard Natural Gas Double flouard Note:Price includes exchanging gas system to oil heated system. Price: USD CNF Reference: Cost: 0 Terms: - -MFORTS STENTER WOVEN, YEAR 1997, WW 1800 MM MFORTS STENTER RANGE 1.800MMM WORKING WIDTH YEAR 1997 PRE-TENSI ENTRY CORINO J BOX WITH 2 DOGAL CENTRALISING GUIDER AND SCROLL UNIT, BETA 3 BOWL FINISHING PADDER, MAHLO WEFT STRAIGHTNER TYPE RFMC 10 YEAR 1997, ENTRY TO THE STENTER WITH 3 FINGURE UNCURLERS, E+L GUIDERS TYPE FR 5501, HORIZTAL PIN & CLIP CHAIN, GAS HEATING, 8 BAYS, COOLING CYLINDER, MAHLO MOISTURE CTROL, TAKE OFF BY CTACT BATCHER TO A FRAMES.

17 Reference: Cost: 0 Terms: SEE Revized year and added price -1 Monforts Tenter Frame, Model Montex, Year 2007, WW 3.2 m, Roller Width 3.4 m Kusters Foulard, Model , with Squeezing Unit, Horizontal Pin Chain 6 Compartments, Oil Heated, Exit with 2 Cooling Zones (Fans) Price - nonnegotiable Located in Israel USD 380, CFR Reference: Cost: 0 Terms: Sanfor MOMFORTS TOPTEX-W, year 2000, small stenter at the entry with automatic weftstraightener BIANCO,with pré-dryer infra-red system of the selvedges, exit by Non-Stop CORINO. Reference: Cost: 0 Terms: - -1 piece - MFORTS, KUSTERS continuous dyeing range, W. W.: 1800 mm, y.o.c KUSTERS continuous dyeing line: - Steam heated - J. Box with 2 E&L selvedge guides - KUSTERS squeezing padder 223/38-3 cylinders, double walled, year Cleaning roll - Steamer capacity: 50 meters - Squeezing padder - 7 washing bays, each with squeezing padder - J. Box and rewinder at delivery, year 1980 MFORTS THERMEX type, Working width: 180 mm, comprising of: J-Box with 2 E&L selvedge guides KUSTERS squeezing padder , year X infrared pre-dryer columns VTG-3M 2 *6 ramps 3 drying compartments 3 X cooling cylinders at delivery, year 1989 PREPARAT KITCHEN 3 stainless steel agitated tanks for thermosol 8 ml of light racks 10 stainless steel tanks for continuous dyeing 4 retention vats in PE Barrel lift Split sale is possible, even single devices. Location: Schengen country Reference: Cost: 0 Terms: - -1 x Monforts stenter type 4002, w.w. 180 cm, yoc. 1979, thermo-oil heated, horizontal pin & clip chain, 5 chambers. Multiple

18 Reference: Cost: 0 Terms: SEE -BRUCKNER,BABCOCK,STANTEX,MFORTS RAM MACHİNES... BRUCKNER RAM 2004 MODEL 6 CHAMBERS 2.40 WORKİNG WIDTH WITH NATURAL GAS MAHLOFLOUARD EURO EX.WORK MFORST RAM 2000 MODEL 8 CHAMBERS WITH NATURAL GAS 2.40 WORKING WIDTH MAHLOFLOUARD PIN+CLIP EURO CNF STENTEX 1995 MODEL 320 WORKING WIDTH 6 CHAMBERS HEATING WITH NATURAL GAS MAHLOFLOUARD VERTICAL CHAIN EURO EX.WORK BRUCKNER RAM STENTER 1990 MODEL 7 CHAMBERS 180 WORKING WIDTH NATURAL GAS MAHLOFLOUARD DOLLAR EX.WORK STANTEX RAM(STENTER) 1998 MODEL 12 CHAMBERS 200 CM WORKING WIDTH NATURAL GAS-WILL BE INFORMED IF YOU HAVE INTEREST MFORST 1977 MODEL 6 CHAMBERS 180 WORKING WIDTH-WILL BE INFORMED IF YOU HAVE INTEREST SUNSUPER 2003 MODEL 7 CHAMBERS OIL HEATED 3.20 WORKING WIDTH-WILL BE INFORMED IF YOU HAVE INTEREST BABCOCK RAM 1997 MODEL 6 CHAMBERS OIL HEATED 2.30 WORKING WIDTH EUR EX.WORK MFORST RAM 1996 MODEL 8 CHAMBERS OIL HEATED 240 WORKING WIDTH EUR EX.WORK BABCOCK RAM 1998 MODEL 8 CHAMBERS NATURAL GAS 220 WORKING WIDTH EUR EX.WORK BABCOCK RAM 1994 MODEL8 CHAMBERS OIL HEATED 220 WORKING WIDTH EUR EX.WORK BABCOCK STENTER 1996 MODEL 8 CHAMBERS 240 WORKING WIDTH WITH NATURAL GAS EUR EX.WORK Sclavos Reference: 8343 Cost: 0 Terms: - 1 X SCLAVOS FABRIC DYEING MACHINE, 2007 SUITABLE FOR TERRY AND FLAT FABRIC MODEL: ATHENA 2 HIGH TEMPERATURE, 3 PORT, CAPACITY 750 KGS, 2 CHEMICAL ADDITI TANKS, CTROLLER SEDOMAT 5000 Stalam Reference: 9247 Cost: 0 Terms: SEE -BRAND:STALAM 2006 model 85 kwa POWER. Price: euro CNF/EACH Stentex

19 Reference: Cost: 0 Terms: SEE - 1 Stentex Stenter Frame Type Stentotherm 3300 Year 1996 Working width 1800 mm Roller width 2000 mm 9 Compartments vertical Pin Chain gas heated with MAX Burners with 2 Foulards with MAHLO Weft straightener Price: F.O.T. EURO 145, Stork Reference: Cost: 0 Terms: Printing machine Stork, type RD 4, w.w mm, y.o.c. 1988, 10 colors installed (exist 12 position of colors on the machine), new rubber belt conveyor, metallic squeegee, dryer 3 drying compartment, steam heated, new net belt conveyor, dryer overhaul 2010 (be deficient 9 pump) Location Poland, airport for inspection: Warsaw Terms of Payment: payable 20 % by irrevocable Advance with order confirmation Payable 80 % by irrevocable confirmed, divisible and transferable Letter of credit through our Advising bank Price CFR Major Seaport: on demand Textima Reference: Cost: 0 Terms: - -Textima Stenter Brand:Textima Yoc 2000 model 185 cm working width 8 chambers Oil Heated Price: dollar EXWORK Printing Brueckner

20 Reference: 9010 Cost: 0 Terms: - Weaving Kranz -Bruckner Stenter 3400mm, Year 1974 Fully Refurbished in 2006, Gas Fired, Vertical Pin Chain Chain Entry, Cutting & Suction Device, Still Running in Production on Floor, Heavy Duty Padder. Reference: Cost: 0 Terms: SEE -KRANTZ Stenter, year 1989 w.w mm 6 chambers double deck foulard delivery on plaiter heating: steam + electricity complete with : Menschner sewing machine in tubular + inspecting machine Price: Euro mill floor Location: Schengen