EC A1/L2 RIS P EKO RIS 400 P E 0.9 EKO 3.0 AIR HANDLING UNITS. Application

Size: px

Start display at page:

Download "EC A1/L2 RIS P EKO RIS 400 P E 0.9 EKO 3.0 AIR HANDLING UNITS. Application"

MargaretMargaret McDonald
5 years ago
Views:

EC A1/L2 Application Ventilation of houses, offices or other heated premises (classrooms, apartments, conference rooms, etc.) Description 3.

There are 5 sizes (airflow interval 42-25 m 3

units have high overall energy savings due to the highly efficient heat recovery (up to 9%), quiet and economical EC fans, effective low-pressure-drop filters, % motorized bypass dampers (for the 19

units are fully equipped with automatic controls. Optional external sensors for CO 2 and humidity and the event planning feature will help to control automatically your climate (demand-level control).

Remote control Features Construction Three remote control options are available: 1. Flex, Stouch or Ptouch remote controllers. 2. Building management system connections. 3.

Fully integrated plug-and-play control system. Frameless construction from double-skinned panels. Acoustic and thermal wall insulation: RIS 4 25 P EKO 3. 3/5 mm. RIS 4-7 P EKO 3.

1 EC A1/L2 Application Ventilation of houses, offices or other heated premises (classrooms, apartments, conference rooms, etc.) Description 3. is a range of heat recovery units with high-efficiency counter-flow heat exchangers and low height. The units are designed for mounting under ceilings in order to save space. There are 5 sizes (airflow interval m 3 /h) with separate heaters available for different climate zones. 3. units have high overall energy savings due to the highly efficient heat recovery (up to 9%), quiet and economical EC fans, effective low-pressure-drop filters, % motorized bypass dampers (for the 19 and 25 versions) and top-level of air tightness. Energy efficiency ensures full thermal comfort for passive houses, without an additional pre-heater at temperatures above -5 C. All the 3. units are fully equipped with automatic controls. Optional external sensors for CO 2 and humidity and the event planning feature will help to control automatically your climate (demand-level control). 3. units are service-friendly and are easy to mount. Filter pollution may be identified by timers or contamination controls (RIS 1-25 P EKO 3.). All units are supplied tested and ready to install. Remote control Features Construction Three remote control options are available: 1. Flex, Stouch or Ptouch remote controllers. 2. Building management system connections. 3. Remote control via PC MB-Gateway. Ideal for ceiling installations. Ready for Passive House technology: high efficiency. Easy and quick mounting. Water/electrical heating options. Fully integrated plug-and-play control system. Frameless construction from double-skinned panels. Acoustic and thermal wall insulation: RIS 4 25 P EKO 3. 3/5 mm. RIS 4-7 P EKO 3. powder-coated white housing RAL 916; RIS 1 25 P EKO 3. powder-coated grey housing RAL 74. Integrated electrical heater or optional duct-based water heater/cooler. Low-pressure-drop filters: F7/M5. Hinged door with locks grants easy access to internal components. Separate compartment on the side of the unit grants quick access to the control board (plug-and-play). Stainless steel condensate tray. Fitted with mounting brackets. Integrated anti-frost pressure switch (RIS 1-25 P EKO 3.). RIS 4 P E.9 EKO 3. Equipped with new control board AHU with EC motors and efficient heat exchanger Electrical heater power in kw Heater type (E - integrated electrical heater; W - prepared for water heater) Housing type (V - vertical, H - horizontal, P - ceiling) AHU size according to maximum airflow range m 3 /h AHU with plate heat exchanger 64

H4 H4 H H1 F H H1 F G H2 W W1 H3 H2 W W1

SP Supply Optional accessories SP Exhaust

2 RIS 4P EKO - RIS 7P EKO 3. RIS 1P EKO - RIS 25P EKO 3. H4 H4 H H1 F H H1 F G H2 W W1 H3 H2 W W1 H3 D W2 W2 Dimensions [mm] Unit W W1 W2 H H1 H2 H3 H4 F ød G D RIS 4PE/PW EKO RIS 7PE/PW EKO RIS 1PE/PW EKO RIS 19PE/PW EKO RIS 25PE/PW EKO Unit Flex Stouch Ptouch MB- Gateway S-1141 S-RC2-F2 S-KFF-U SSB Heating SSB Cooling SP Supply Optional accessories SP Exhaust SVS SSK SKS RMG VVP/ VXP SKG AKS AP AVS AVA EKA NV PH RIS 4PE EKO CM23-1-F-L CM23-1-F-L RIS 4PW EKO TF23 CM23-1-F-L RIS 7PE EKO CM23-1-F-L CM23-1-F-L RIS 7PW EKO TF23 CM23-1-F-L EKS NV PH RIS 1PE EKO LM23A-TP LM23A-TP - 5x x25 RIS 1PW EKO NF23A LM23A-TP 5x25 5x x25 RIS 19PE EKO LM23A-TP LM23A-TP - 7x4* x4* RIS 19PW EKO NF23A LM23A-TP 7x4* 7x4* x4* RIS 25PE EKO LM23A-TP LM23A-TP - 7x x4 RIS 25PW EKO NF23A LM23A-TP 7x4 7x x4 *necessary to order flange adapter STP 7x4-7x3 Accessories Network Module Remote controller Control panel Remote controller Pressure transmitter CO2 sensor MB- Gateway p. 178 Ptouch p. 175 FLEX p. 177 Stouch p. 176 S-1141 p. 179 S-RC2-F2 p. 18 Humidity sensor Thermic water valve actuator Actuator for dampers Water heater coil Damper for rectangular duct Rectangular duct silencer Shut-off damper Circular duct silencer S-KFF-U p. 181 SSB p. 195 SP p. 21 SVS p. 19 SSK p. 213 SKS p. 215 SKG p. 212 AKS p. 216 Mounting clamps Heating coil Circular duct water cooler Electrical duct pre-heater Electrical duct pre-heater Mixing point 2 and 3 way valves Flange adapter AP p. 219 AVS EKS EKA p. 185 AVA p. 193 NV PH p. 23 NV PH p.21 RMG p. 196 VVP/VXP p. 197 STP p

RIS 4PE EKO 3. RIS 4PE EKO 3. 5% 5% Extract air Outdoor air GAGRIS1747_17A 4PE.9 EKO 3. Integrated electrical heater GAGRIS1746_17A 4PE 1.6 EKO 3. Integrated electrical heater GAGRIS1692_16A 4PE 3.

3 RIS 4PE EKO 3. RIS 4PE EKO 3. 5% 5% Extract air Outdoor air GAGRIS1747_17A 4PE.9 EKO 3. Integrated electrical heater GAGRIS1746_17A 4PE 1.6 EKO 3. Integrated electrical heater GAGRIS1692_16A 4PE 3. EKO 3. Integrated electrical heater.9 EKO EKO EKO 3. Electrical heater phase/voltage [5Hz/VAC] ~1, 23 ~1, 23 ~1, 23 [kw],9 1,6 3, EC fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],85/,73 fan speed [min -1 ] 3 supply power/current [kw/a],85/,73 fan speed [min -1 ] 3 Max power consumption [kw/a] 1,7/5,5 1,77/8,5 3,17/14,5 Housing insulation, mineral wool [mm] 3 Colour RAL white 916 Weight (net, without packing) [kg] 74 Comply with ERP 216; 218 * Calculated according EN (balanced mass flow) EN : RIS 4PE EKO 3. LWA, Supply Extract Surrounding Measured at 395 m 3 /h, Pa 66

4 RIS 4PW EKO 3. 5% 5% RIS 4PW EKO 3. Extract air Outdoor air GAGRIS1748_19A 4PW EKO 3. Optional water heater 4PW EKO 3. Water heater (optional) AVS Fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],85/,73 fan speed [min -1 ] 3 supply power/current [kw/a],85/,73 fan speed [min -1 ] 3 Max power consumption [kw/a],17/1,5 Housing insulation, mineral wool [mm] 3 Colour RAL white 916 Weight (net, without packing) [kg] 73 Comply with ERP 216; 218 * Calculated according EN (balanced mass flow) EN : RIS 4PW EKO 3. LWA, Supply Extract Surrounding Measured at 395 m 3 /h, Pa 67

5 RIS 7PE EKO Extract air Outdoor air GAGRIS1737_8A 7PE 1.2 EKO 3. Integrated electrical heater GAGRIS1736_7A 7PE 3. EKO 3. Integrated electrical heater GAGRIS1693_5B 7PE 4.5 EKO 3. Integrated electrical heater 1.2 EKO EKO EKO 3. Electrical heater phase/voltage [5Hz/VAC] ~1, 23 ~1, 23 ~3, 4 [kw] 1,2 3, 4,5 EC fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],168/1,4 fan speed [min -1 ] 323 RIS 7PE EKO 3. supply power/current [kw/a],168/1,4 fan speed [min -1 ] 323 Max power consumption [kw/a] 1,54/8,34 3,34/15,84 4,84/9,3 Housing insulation, mineral wool [mm] 3 Colour RAL white 916 Weight (net, without packing) [kg] 13, ,5 Comply with ERP 216;218 * Calculated according EN (balanced mass flow) EN : RIS 7PE EKO 3. LWA, Supply Extract Surrounding Measured at 7 m 3 /h, Pa 68

6 RIS 7PW EKO RIS 7PW EKO 3. Extract air Outdoor air GAGRIS1738_9A 7PW EKO 3. Optional water heater 7PW EKO 3. Water heater (optional) AVS 25 Fans phase/voltage [5Hz/VAC] ~1,23 exhaust power/current [kw/a],168/1,4 fan speed [min -1 ] 323 supply power/current [kw/a],168/1,4 fan speed [min -1 ] 323 Max power consumption [kw/a],34/2,84 Housing insulation, mineral wool [mm] 3 Colour RAL white 916 Weight (net, without packing) [kg] 13 Comply with ERP 216;218 * Calculated according EN (balanced mass flow) EN : RIS 7PW EKO 3. LWA, Supply Extract Surrounding Measured at 7 m 3 /h, Pa 69

7 RIS 1PE EKO 3. RIS 1PE EKO 3. Extract air Outdoor air GAGRIS1744_22A 1PE 3. EKO 3. Integrated electrical heater GAGRIS1745_21B 1PE 6. EKO 3. Integrated electrical heater GAGRIS171_2B 1PE 9. EKO 3. Integrated electrical heater 3. EKO EKO EKO 3. Electrical heater phase/voltage [5Hz/VAC] ~1, 23 ~3, 4 ~3, 4 [kw] 3, 6, 9, EC fans phase/voltage [5Hz/VAC] ~1,23 exhaust power/current [kw/a],45/2,95 fan speed [min -1 ] 34 supply power/current [kw/a],37/2,5 fan speed [min -1 ] 34 Max power consumption [kw/a] 3,82/18,49 6,82/14,19 9,82/18,49 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] 17 Comply with ERP 216;218 * Calculated wet efficiency. (balanced mass flow) : RIS 1PE EKO 3. LWA, Supply Extract Surrounding Measured at 1298 m 3 /h, Pa 7

8 RIS 1PW EKO 3. RIS 1PW EKO 3. Extract air Outdoor air GAGRIS1721_23A 1PW EKO 3. Optional water heater 1PW EKO 3. Water heater (optional) SVS 5x25 Fans phase/voltage [5Hz/VAC] ~1,23 exhaust power/current [kw/a],45/2,95 fan speed [min -1 ] 34 supply power/current [kw/a],37/2,5 fan speed [min -1 ] 34 Max power consumption [kw/a],82/5,49 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] 17 Comply with ERP 216;218 * * Calculated wet efficiency. (balanced mass flow) EN : RIS 1PE EKO 3. LWA, Supply Extract Surrounding Measured at 1298 m 3 /h, Pa 71

9 RIS 19PE EKO RIS 19PE EKO Extract air Outdoor air GAGRIS1751_25A 19PE 3. EKO 3. Integrated electrical heater GAGRIS1752_24B 19PE 6. EKO 3. Integrated electrical heater GAGRIS176_1B 19PE 12. EKO 3. Integrated electrical heater 3. EKO EKO EKO 3. Electrical heater phase/voltage [5Hz/VAC] ~1, 23 ~3, 4 ~3, 4 [kw] 3, 6, 12, EC fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],485/3,12 fan speed [min -1 ] 254 supply power/current [kw/a],488/3,16 fan speed [min -1 ] 254 Max power consumption [kw/a] 3,97 /2,32 6,97 /14,92 12,97 /24,32 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] Comply with ERP 216;218 * Calculated wet efficiency. (balanced mass flow) : RIS 19PE EKO 3. LWA, Supply Extract Surrounding Measured at 1938 m 3 /h, Pa 72

10 RIS 19PW EKO Extract air Outdoor air GAGRIS1753_26A 19PW EKO 3. Optional water heater RIS 19PW EKO 3. 19PW EKO 3. Water heater (optional) SVS 7x4 Fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],485/3,12 fan speed [min -1 ] 254 supply power/current [kw/a],488/3,16 fan speed [min -1 ] 254 Max power consumption [kw/a],97 /6,32 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] 269 Comply with ERP 216;218 * Calculated wet efficiency. (balanced mass flow) : RIS 19PW EKO 3. LWA, Supply Extract Surrounding Measured at 1938 m 3 /h, Pa 73

RIS 25PE EKO 3. RIS 25PE EKO 3. Extract air Outdoor air GAGRIS1754_27B 25PE 4.5 EKO 3. Integrated electrical heater GAGRIS1755_28B 25PE 9. EKO 3. Integrated electrical heater GAGRIS177_15B 25PE 18.

Electrical heater phase/voltage [5Hz/VAC] ~3, 4 ~3, 4 ~3, 4 [kw] 4,5 9, 18, EC fans phase/voltage [5Hz/VAC] ~1,23 exhaust power/current

11 RIS 25PE EKO 3. RIS 25PE EKO 3. Extract air Outdoor air GAGRIS1754_27B 25PE 4.5 EKO 3. Integrated electrical heater GAGRIS1755_28B 25PE 9. EKO 3. Integrated electrical heater GAGRIS177_15B 25PE 18. EKO 3. Integrated electrical heater 4.5 EKO EKO EKO 3. Electrical heater phase/voltage [5Hz/VAC] ~3, 4 ~3, 4 ~3, 4 [kw] 4,5 9, 18, EC fans phase/voltage [5Hz/VAC] ~1,23 exhaust power/current [kw/a],725/3,24 fan speed [min -1 ] 28 supply power/current [kw/a],675/3 fan speed [min -1 ] 28 Max power consumption [kw/a] 5,9 /12,78 1,4 /19,28 19,4 /32,28 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] 322 Comply with ERP 216;218 * Calculated wet efficiency. (balanced mass flow) : RIS 25PE EKO 3. LWA, Supply Extract Surrounding Measured at 2548 m 3 /h, 12 Pa 74

12 RIS 25PW EKO 3. GAGRIS1756_29A 25PW EKO 3. Optional water heater RIS 25PW EKO 3. Extract air Outdoor air 25PW EKO 3. Water heater (optional) phase/voltage [5Hz/VAC] SVS 7x4 Fans phase/voltage [5Hz/VAC] ~1, 23 exhaust power/current [kw/a],725/3,24 fan speed [min -1 ] 28 supply power/current [kw/a],675/3 fan speed [min -1 ] 28 Max power consumption [kw/a] 1,4 /6,28 Housing insulation, mineral wool [mm] 5 Colour RAL grey 74 Weight (net, without packing) [kg] 322 Comply with ERP 216;218 * Calculated wet efficiency. (balanced mass flow) : RIS 25PW EKO 3. LWA, Supply Extract Surrounding Measured at 2548 m 3 /h, 12 Pa 75

KE - electrical heater M1 - actuator of by-pass damper TL - fresh air temperature sensor TJ - supply air temperature sensor TE - exhaust air temperature sensor DTJ.

13 RIS 4PE EKO 3. / RIS 7PE EKO 3. (ceiling mounted) versions with electrical heater AVA IV - exhaust air fan PV - supply air fan PR - plate heat exchanger PF - filter for supply air (class F7) IF - filter for extract air (class M5) KE - electrical heater M1 - actuator of by-pass damper TL - fresh air temperature sensor TJ - supply air temperature sensor TE - exhaust air temperature sensor DTJ.1- humidity + temperature sensor AVA - optionally supplied water cooler EKA NV PH - optional fresh air pre-heater RIS 1PE EKO 3. / 19PE EKO 3. / 25PE EKO 3. (ceiling mounted) versions with electrical heater EKS NV PH IV - exhaust air fan PV - supply air fan PR - plate heat exchanger KE - electrical heater PF - filter for supply air (class F7) IF - filter for extract air (class M5) TE - temperature sensor for exhaust air TL - temperature sensor for fresh air EKS NV PH - optional fresh air pre-heater DTJ.1 - humidity + temperature sensor TJ - temperature sensor for supply air M1 - actuator of by-pass damper PS1 - supply air differential pressure switch PS2 - extract air differential pressure switch PS3 - heat exchanger antifrost pressure switch 76

14 RIS 4PW EKO 3. / RIS 7PW EKO 3. (ceiling mounted) versions with water heater AVA T1 EKA NV PH DTJ.1 IV - exhaust air fan PV - supply air fan PR - plate heat exchanger PF - filter for supply air (class F7) IF - filter for extract air (class M5) TV - antifrost sensor M1 - actuator of by-pass damper AVA - optionally supplied water cooler M4 - water heater circulation pump M6 - optionally supplied mixing valve and motor TL - fresh air temperature sensor TJ - supply air temperature sensor TE - exhaust air temperature sensor T1 - antifrost thermostat DTJ.1 - humidity + temperature sensor AVS - optionally supplied water heater EKA NV PH - optional fresh air pre-heater RIS 1PW EKO 3. / RIS 19PW EKO 3. / 25PW EKO 3. (ceiling mounted) versions with water heater EKS NV PH DTJ.1 IV - exhaust air fan PV - supply air fan PR - plate heat exchanger PF - filter for supply air (class F7) IF - filter for extract air (class M5) TE - temperature sensor for exhaust air TL - temperature sensor for fresh air TJ - temperature sensor for supply air T1 - antifrost thermostat TV - antifrost sensor DTJ.1 - humidity + temperature sensor M1 - actuator of by-pass damper M4 - water heater circulation pump M6 - optionally supplied mixing valve and motor PS1 - supply air differential pressure switch PS2 - extract air differential pressure switch PS3 - heat exchanger antifrost pressure switch SVS - optionally supplied water heater EKS NV PH - optional fresh air heater 77

15 Description of the functions Fans Functions FUNCTIONS Date and time settings 4 speeds for easy and user-friendly control ( Stop the unit is stopped; Low, medium, and High. Service menu allows adjusting each speed individually) Electric heater Water heater DX cooler Water cooler Bypass damper Filter pollution monitoring Sensors Functional units Emergency signals and inputs/outputs Remote controllers BOOST function (Fans operate at highest speed) Comfortable air temperature function Cold/heat recovery Fire place function Dryness protection Weekly schedule Holiday schedule User and service control levels Manual air flow balancing CO 2 level indication and reduction function Night cooling function Relative humidity (RH) level indication and reduction function Software and configuration update possibility temperature control according to the extract air sensor E RIS EKO 3. Monitoring function (all sensors and I/O) 2 2 Mode switch (start/stop) Extracted air relative humidity converter Manual components control 1 1 Soft start and stop Fan failure protection Speed synchronous/asynchronous -1V control On/Off / PWM control Manual protection Overheat protection (additional protection software) Pulse-width modulation (PWM) valve actuator control Protection using temperature sensor Protection using termostat (NC) Circulation pump control Return water temperature sensor Control On/Off Pulse-width modulation (PWM) valve actuator control Control with three-positional valve actuator 3-position actuator control By pressure switch (NC) By filter timer temperature sensor Fresh air temperature sensor temperature sensor Extract air temperature sensor Fire protection input Working indication output Alarm indication output Stouch Flex Ptouch MB-Gateway W 1 With FLEX TEST remote controler 2 Only sensors 78

RIS V EKO A1/L2 RIS 700 V E L EKO 3.0 AIR HANDLING UNITS. Application

RIS V EKO A1/L2 RIS 700 V E L EKO 3.0 AIR HANDLING UNITS. Application EC A1/L2 7 1 19 2 75 Application Ventilation of houses, offices or other heated premises (classrooms, apartments, conference rooms, etc.) Description RIS V EKO 3. is a range of heat recovery units with