TPLP PRE-ASSEMBLED LOW PROFILE EVAPORATORS

Transcription

1 PRODUT DATA & INSTALLATION PRE-ASSEMBLED LOW PROFILE S N O W F E A T U R I N G Air & Electric DEFROST ELETRIAL POWER: 115/1/60, /1/60, /3/60, 460/1/60 See Page 16 for details Bulletin T30--PDI For the latest product updates and further information, visit ONTENTS Page Nomenclature... 2 Features & Options... 2 Pre-Assembled Features... 3 apacity Data... 4 Electrical Data... 7 Wiring Diagrams - Models with standard PS motors Wiring Diagrams - Models with optional E Motors / SmartSpeed Shipping Weights Dimensional Data Recommended Expansion Valve Selections Installation Instructions Generic Service Parts Warranty Project Information As Built Service Parts... Back 05/04/12

2 T = Trenton Pre-Assembled Low Profile Evaporator Number of Fans Nominal apacity: x 10 F TD, Btu/H, R404A NOMENLATURE T P LP 3 15 L E S2 B R6 - PS Application Range: M = Medium to High Temp 6 FPI (10 F to 45 F (-12 to 7 ) Evap Temp) L = Low Temp 6 FPI (-40 F to 0 F(-40 to -17 ) Evap Temp) V = Low Temp 4 FPI (-40 F to 0 F (-40 to -17 ) Evap Temp) Generation: B = 2 nd Voltage: S1 = 115/1/60 (air defrost models only) S2 = /1/60 S4 = 460/1/60 (2 to 6 fan models only) T3 = /3/60 Defrost*: A = Air Refrigerant Designation: R2 = R22 / R407 R6 = R404A E = Electric Motor Designation: PS = PS Permanent Split apacitor E2 = E Motor STANDARD FEATURES PS motors Streamlined cabinet style High efficiency, durable fan guard Front access ompact Internally enhanced tubing Spacious electrical and refrigeration compartments Low heater wattage Proven motor/fan/motor mount design Factory installed expansion valve, solenoid valve and room thermostat Schrader valve on suction header Positive slope, hinged drain pan entral drain connections (approximate) 3/4 ID Universal drain fitting for 3/4 MPT or 3/4 flare fitting Factory installed distributor nozzle 460/1/60 PS motor only OPTIONAL FEATURES E motors with SmartSpeed Technology (Patent Pending). See page 16 Heat exchanger - shipped loose Heresite oating opper or GW Aluminum Gold oat Fins Wire fan guard Painted abinet T30--PDI /04/12

3 PRE-ASSEMBLED FEATURES Thermostat Mounted on Front of Unit Solenoid Valve and TXV Mounted Solenoid Valve Wire pulled through and labeled on each end Schrader Valve Located Outside T30--PDI /04/12

4 APAITY DATA - R404A ALL MODELS Medium Temperature Models - 6 F.P.I. Medium Temp. Models 104M 106M 107M 209M 211M 214M 317M 320M 423M 426M 532M 639M Number Of Fans / (-4/-7) (1260) (1610) (1990) (2520) (3220) (4100) (4980) (5860) (6740) (7610) (9370) (11400) apacity Evap BTUH Temp. (-9) (1249) (1597) (1972) (2494) (3192) (4062) (4933) (5803) (6674) (7544) (9285) (11316) (WATTS) F ( ) (-12) (1234) (1580) (1952) (2471) (3159) (4021) (4883) (5744) (6606) (7468) (9191) (11202) Air Flow FM (L/S) (470) (450) (430) (950) (900) (850) (1350) (1270) (1800) (1700) (2120) (2550) Refrigerant harge LB R404A (KG) (0.3) (0.5) (0.6) (0.6) (0.9) (1.1) (1.3) (1.7) (1.7) (2.2) (2.7) (3.3) Low Temperature Models - 6 F.P.I. Low Temp. Models 104L 105L 106L 207L 209L 211L 314L 317L 419L 422L 527L 631L Number Of Fans (-18) 3930 (1150) 5200 (1520) 6090 (1780) 7930 (2320) 9720 (2850) (3370) (4420) (5300) (5860) (6740) (8490) (10100) (-23) (1130) (1470) (1750) (2250) (2750) (3310) (4280) (5160) (5740) (6590) (8230) (9640) apacity Evap BTUH Temp. (-29) (1110) (1410) (1700) (2170) (2640) (3220) (4100) (4980) (5570) (6440) (7910) (9080) (WATTS) F ( ) (-34) (1040) (1290) (1580) (2000) (2430) (2990) (3780) (4600) (5160) (5980) (7290) (8320) -40 (-40) 3270 (960) 3980 (1170) 4920 (1440) 6180 (1810) 7470 (2190) 9340 (2740) (3430) (4190) (4720) (5510) (6590) (7410) Air Flow FM (L/S) (480) (450) (430) (950) (900) (850) (1350) (1270) (1800) (1700) (2120) (2550) Refrigerant harge F(-29 ) LB. (KG) 0.7 (0.3) 1.0 (0.5) 1.3 (0.6) 1.3 (0.6) 1.7 (0.8) 2.5 (1.1) 2.8 (1.3) 3.7 (1.7) 3.7 (1.7) 4.9 (2.2) 6.1 (2.7) 7.2 (3.3) Refrigerant harge -20 F(-29 ) LB. (KG) 0.8 (0.3) 1.1 (0.5) 1.4 (0.6) 1.4 (0.6) 2.1 (0.9) 2.8 (1.2) 3.1 (1.4) 4.1 (1.8) 4.1 (1.8) 5.4 (2.4) 6.7 (3.0) 7.9 (3.6) Low Temperature Models - 4 F.P.I. Low Temp. 4 FPI Models 103V 104V 105V 206V 208V 209V 312V 315V 416V 419V 523V 627V Number Of Fans (-18) 3070 (900) 4340 (1270) 5170 (1510) 6720 (1970) 8240 (2410) 9610 (2820) (3690) (4600) (4860) (5740) (7090) (8520) (-23) (890) (1240) (1490) (1920) (2360) (2780) (3600) (4510) (4770) (5650) (6910) (8230) apacity Evap BTUH Temp. (-29) (880) (1200) (1470) (1880) (2290) (2720) (3520) (4390) (4690) (5570) (6740) (7910) (WATTS) F ( ) (-34) (830) (1110) (1370) (1740) (2120) (2540) (3250) (4070) (4360) (5210) (6240) (7290) -40 (-40) 2620 (770) 3460 (1010) 4310 (1260) 5430 (1590) 6590 (1930) 8020 (2350) (2990) (3750) (4010) (4800) (5710) (6590) Air Flow FM (L/S) (510) (480) (450) (1010) (950) (900) (1430) (1350) (1910) (1800) (2250) (2700) Refrigerant harge F(-29 ) LB. (KG) 0.7 (0.3) 1.0 (0.5) 1.3 (0.6) 1.3 (0.6) 1.7 (0.8) 2.5 (1.1) 2.8 (1.3) 3.7 (1.7) 3.7 (1.7) 4.9 (2.2) 6.1 (2.7) 7.2 (3.3) Refrigerant harge -20 F(-29 ) LB. (KG) 0.8 (0.3) 1.1 (0.5) 1.4 (0.6) 1.4 (0.6) 2.1 (0.9) 2.8 (1.2) 3.1 (1.4) 4.1 (1.8) 4.1 (1.8) 5.4 (2.4) 6.7 (3.0) 7.9 (3.6) apacities rated using R404A with 10 F (5.6 ) TD & 100 F (38 ) liquid temperature. apacities at other TD within a range of 8 to 15 F (4.4 to 8.3 ) are directly proportional to TD, or use formula: apacity = Rated capacity 10 x TD. For capacities at TD outside of range 8 to 15 F (4.4 to 8.3 ), or liquid temperature lower than 75 F (24 ), consult factory. orrection Factors for Other Refrigerants Use R404A Values Multiplied By: R22 R134a R507 R407 * * When using R407, the factor above is to be used when matching to condensing units with Dew Point ratings. This factor will ensure that proper system balancing will occur to compensate for glide to fit the application. If the system is sized correctly, one may expect a slight increase in system capacity, along with slightly higher saturated suction temperatures. T30--PDI /04/12

5 ELETRIAL DATA 115/1/60 - AIR DEFROST MODELS MODEL FPI QTY. HP FLA TOTAL PS MOTORS WATTS MIN. IR. AMPAITY (A) MOTORS MAX. FUSE (AMPS) HP E MOTORS FLA TOTAL WATTS MIN. IR. AMPAITY (A) MAX. FUSE (AMPS) 104MAS1 1 1/ / MAS1 1 1/ / MAS1 1 1/ / MAS1 2 1/ / MAS1 2 1/ / MAS1 2 1/ / MAS1 3 1/ / MAS1 3 1/ / MAS1 4 1/ / MAS1 4 1/ / MAS1 5 1/ / MAS1 6 1/ / MODEL FPI QTY. ELETRIAL DATA /1/60 - AIR DEFROST MODELS HP FLA TOTAL PS MOTORS WATTS MIN. IR. AMPAITY (A) MOTORS MAX. FUSE (AMPS) HP FLA TOTAL E MOTORS WATTS MIN. IR. AMPAITY (A) MAX. FUSE (AMPS) 104MAS2 1 1/ / MAS2 1 1/ / MAS2 1 1/ / MAS2 2 1/ / MAS2 2 1/ / MAS2 2 1/ / MAS2 3 1/ / MAS2 3 1/ / MAS2 4 1/ / MAS2 4 1/ / MAS2 5 1/ / MAS2 6 1/ / MODEL ELETRIAL DATA 460/1/60 - AIR DEFROST MODELS FPI QUANTITY HP FLA TOTAL MOTORS PS MOTORS WATTS MIN. IR. AMPAITY (A) MAX. FUSE (AMPS) 209MAS4 2 1/ MAS4 2 1/ MAS4 2 1/ MAS4 3 1/ MAS / MAS4 4 1/ MAS4 4 1/ MAS4 5 1/ MAS4 6 1/ T30--PDI /04/12

6 ELETRIAL DATA /1/60 & /3/60 ELETRI DEFROST MODELS MODEL FPI QTY. HP PS MOTORS FLA MA WATTS TOTAL (A) MOTORS MAX. FUSE (AMPS) HP E MOTORS FLA MA WATTS TOTAL (A) MAX. FUSE (AMPS) TOTAL WATTS TOTAL AMPS DEFROST HEATERS /1/ /3/60 MA (A) MAX. FUSE (AMPS) 104ME* 1 1/ / ME* 1 1/ / ME* 1 1/ / ME* 2 1/ / ME* 2 1/ / ME* 2 1/ / ME* 3 1/ / ME* 3 1/ / ME* 4 1/ / ME* 4 1/ / ME* 5 1/ / ME* 6 1/ / LE* 1 1/ / LE* 1 1/ / LE* 1 1/ / LE* 2 1/ / LE* 2 1/ / LE* 2 1/ / LE* 3 1/ / LE* 3 1/ / LE* 4 1/ / LE* 4 1/ / LE* 5 1/ / LE* 6 1/ / VE* 1 1/ / VE* 1 1/ / VE* 1 1/ / VE* 2 1/ / VE* 2 1/ / VE* 2 1/ / VE* 3 1/ / VE* 3 1/ / VE* 4 1/ / VE* 4 1/ / VE* 5 1/ / VE* 6 1/ / * = S2 or T3. Refer to Nomenclature for details TOTAL AMPS MA (A) MAX. FUSE (AMPS) T30--PDI /04/12

7 ELETRIAL DATA - 460/1/60 ELETRI DEFROST MODELS MODEL FPI QTY. HP FLA TOTAL MOTORS PS MOTORS WATTS MA (A) MAX. FUSE (AMPS) TOTAL WATTS DEFROST HEATERS TOTAL AMPS MA (A) MAX. FUSE (AMPS) 209MES4 2 1/ MES4 2 1/ MES4 2 1/ MES4 3 1/ MES / MES4 4 1/ MES4 4 1/ MES4 5 1/ MES4 6 1/ LES4 2 1/ LES4 2 1/ LES4 2 1/ LES4 3 1/ LES / LES4 4 1/ LES4 4 1/ LES4 5 1/ LES4 6 1/ VES4 2 1/ VES4 2 1/ VES4 2 1/ VES4 3 1/ VES / VES4 4 1/ VES4 4 1/ VES4 5 1/ VES4 6 1/ T30--PDI /04/12

8 WIRING DIAGRAM - 115/1/60, /1/60 STANDARD PS MOTORS AIR DEFROST MODELS PS WITH DEFROST TIME LOK WITHOUT DEFROST TIME LOK REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS DEFROST LOK PARAGON # 8145 OR EQUIVALENT L1 L2(N) L1 L2(N) TM 4 X N NOTE #3 OMIT 2ND FUSE IF(N) NOTE #3 F 4 OMIT 2ND FUSE IF(N) TO MULTIPLE S (IF APPLI) F 4 TO MULTIPLE EVAPS (IF APPLI) PUMP DOWN SPAE SWITH THERMOSTAT (IF USED) LIQUID LINE SOLENOID VALVE SPAE THERMOSTAT LIQUID LINE SOLENOID VALVE N.. N.. 4 F TERMINAL BOARD 4 F TERMINAL BOARD. MOTOR POWER PLUGS. MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY REFER TO DATA PLATE FOR MOTOR QUANTITY NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4). MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON. 1-LP AIR 09/06 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

9 WIRING DIAGRAM - 460/1/60 STANDARD PS MOTORS AIR DEFROST MODELS PS WITH DEFROST TIME LOK WITHOUT DEFROST TIME LOK Hz 380/ Hz L1 L2 ONTROL VOLTAGE Hz 380/ Hz ONTROL VOLTAGE DEFROST LOK PARAGON # 8145 OR EQUIVALENT L1 L2(N) L1 L2 L1 L2(N) TM 4 X N NOTE #3 OMIT 2ND FUSE IF(N) NOTE #3 OMIT 2ND FUSE IF(N) M2 M1 TO MULTIPLE S (IF APPLI) M2 M1 TO MULTIPLE S (IF APPLI) PUMP DOWN SPAE LIQUID LINE SWITH THERMOSTAT SOLENOID VALVE (IF USED) N.. SPAE THERMOSTAT LIQUID LINE SOLENOID VALVE N.. M1 M2 TERMINAL BOARD 4 N M1 M2 TERMINAL BOARD 4 N. MOTOR POWER PLUGS. MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY REFER TO DATA PLATE FOR MOTOR QUANTITY NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4). MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON. 6-LP 460 AIR 09/06 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

10 PS WIRING DIAGRAM /1/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - SINGLE 10A MAX. FOR ALL MODELS WITHOUT DEFROST HEATER ONTATOR USING MAXIMUM 15A HEATER OVERURRENT PROTETION DEFROST LOK PARAGON # 8145 OR EQUIVALENT REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2 TM 3 4 X 1 2 N 15A OMPR INTERLOK (IF USED) SPAE THERMOSTAT N.. WARNING EVAP FIELD MODIFIATION MUST BE MADE PUMP DOWN SWITH (IF USED) LIQUID LINE SOL VALVE SEE NOTE: 1 RELOATE WHITE WIRE FROM N TO H1 AS SHOWN 2 INSTALL ORANGE JUMPER (SUPPLIED LOOSE) FROM H2 TO N 2 ORANGE JUMPER 4 F X N 3 H1 H2 H3. BK BN DT FD RD 1 DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY WH HEATER LIMIT SWITH YL DEFROST HEATERS MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. 2-LP ED 12/07 T30--PDI /04/12

11 WIRING DIAGRAM /1/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - SINGLE PS DEFROST LOK PARAGON # 8145 OR EQUIVALENT FOR ALL MODELS USING DEFROST HEATER ONTATOR REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2 TM 3 4 X 1 2 N NOTE #3 NOTE #3 OMPR INTERLOK (IF USED) L1 T1 L2 T2 DEFROST HEATER ONTATOR SPAE THERMOSTAT N.. PUMP DOWN SWITH (IF USED) LIQUID LINE SOL VALVE 4 F X N 3 H1 H2 H3. BK BN DT FD RD WH YL DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY HEATER LIMIT SWITH DEFROST HEATERS MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON 3-LP ED ONTATOR SINGLE 12/07 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

12 WIRING DIAGRAM /3/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - SINGLE PS FOR ALL MODELS USING 3 PHASE DEFROST HEATER ONTATOR DEFROST LOK PARAGON # 8145 OR EQUIVALENT REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2 L3 TM 3 4 X 1 2 N NOTE #3 NOTE #3 L1 L2 L3 DEFROST HEATER ONTATOR OMPR INTERLOK (IF USED) T1 T2 T3 SPAE THERMOSTAT N.. PUMP DOWN SWITH (IF USED) LIQUID LINE SOL VALVE. 4 F X BK BN DT FD DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY RD N WH 3 YL HEATER LIMIT SWITH H1 H2 H3 DEFROST HEATERS MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON 3A-LP ED 3ph.ONTATOR SINGLE 12/07 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

13 WIRING DIAGRAM - 460/1/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - SINGLE PS FOR ALL 460V MODELS USING DEFROST HEATER AND ONTATORS DEFROST LOK PARAGON # 8145 OR EQUIVALENT REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2(N) L1 L2 TM 3 4 X 1 2 N NOTE #3 NOTE #3 OMPR INTERLOK (IF USED) L1 T1 L2 T2 DEFROST HEATER ONTATOR L1 T1 L2 T2 EVAP ONTATOR SPAE THERMOSTAT N.. PUMP DOWN SWITH (IF USED) LIQUID LINE SOL VALVE M1 M2 H1 H2 4 3 F X N. BN BK DT FD RD OIL DEFROST HEATERS DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY YL WH MOTOR POWER PLUGS REFER TO EVAPORTOR DATA PLATE FOR MOTOR QUANTITY HEATER LIMIT SWITH NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON 7-LP ED ONTATOR SINGLE 12/07 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

14 WIRING DIAGRAM /1/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - MULTIPLE S FOR ALL MODELS USING DEFROST HEATER ONTATOR PS DEFROST LOK PARAGON # 8145 OR EQUIVALENT REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2 TM 3 4 X 1 2 N NOTE #3 NOTE #3 OMPR INTERLOK (IF USED) L1 T1 L2 T2 DEFROST HEATER ONTATOR WARNING N.. NOTE #3 EVAP#2 FIELD MODIFIATION MUST BE MADE SEE NOTE: PUMP DOWN SWITH (IF USED) SPAE THERMOSTAT LIQUID LINE SOL VALVE 1 2 RELOATE WHITE WIRE FROM N AS SHOWN REMOVE AND INSULATE AS SHOWN 4 F X N 3 H1 H2 4 F X N 3 H1 H2. BK BN DT FD RD WH YL. 2 BK BN DT FD RD WH 1 YL DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY HEATER LIMIT SWITH DEFROST TERMINATION & DELAY ONTROL DT-DEFROST TERM FD- DELAY HEATER LIMIT SWITH DEFROST HEATERS * Remove & Insulate DEFROST HEATERS MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY PRIMARY MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY SEONDARY * Fan delay not used on second evap / use fan contactor if total fan amps exceeds 10A NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON 4-LP ED ONTATOR MULTI 12/07 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

15 WIRING DIAGRAM - 460/1/60 STANDARD PS MOTORS ELETRI DEFROST MODELS - MULTIPLE S PS FOR ALL 460V MODELS USING DEFROST HEATER AND ONTATORS DEFROST LOK PARAGON # 8145 OR EQUIVALENT REFER TO NAMEPLATE FOR ELETRIAL REQUIREMENTS L1 L2(N) L1 L2 TM 3 4 X NOTE #3 1 N NOTE #3 2 DEFROST HEATER L1 L2 ONTATOR OMPR INTERLOK (IF USED) T1 T2 L1 T1 L2 T2 EVAP ONTATOR PUMP DOWN SWITH (IF USED) SPAE THERMOSTAT N.. LIQUID LINE SOL VALVE NOTE #3 1 WARNING EVAP#2 FIELD MODIFI- ATION MUST BE MADE RELOATE WHITE WIRE FROM N AS SHOWN * M1 M2 H1 H2 4 3 F X N M1 M2 H1 H2 4 3 F X N. BN BK DT RD. BN DT BK RD 1 FD FD DEFROST TERMINATION & DELAY ONTROL DEFROST TERMINATION & DELAY ONTROL DEFROST HEATERS DT-DEFROST TERM FD- DELAY DEFROST HEATERS DT-DEFROST TERM FD- DELAY YL WH YL WH MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY HEATER LIMIT SWITH PRIMARY MOTOR POWER PLUGS REFER TO DATA PLATE FOR MOTOR QUANTITY HEATER LIMIT SWITH SEONDARY * Note: Fan Delay not used on second evap NOTES 1). USE OPPER ONDUTORS ONLY 2). USE 75 WIRE (OR HIGHER) 3). OVERURRENT PROTETION FOR MOTORS AND DEFROST HEATERS MUST NOT EXEED MAXIMUM VALUE SHOWN ON NAMEPLATE. 4.) MAY BE FATORY INSTALLED-MOUNTED AND WIRED ON 8-LP 460v ED ONTATOR MULTI 09/06 TERMINALS -OMPONENT TERMINAL -TERMINAL BLOK TERMINAL ONDUTORS/WIRING FATORY WIRING WIRING BY OTHERS OPTIONAL FATORY OR BY OTHERS ALL FIELD WIRING MUST BE DONE IN OMPLIANE WITH ALL APPLIABLE LOAL AND NATIONAL ODES. T30--PDI /04/12

16 EM PATENT PENDING DESIGN FEATURES Standard on all E Motors NO special controls required. Refrigeration mode E motor operates at full speed. onsumption 60 W per motor Off ycle mode E motor operates at reduced speed. onsumption 13 W per motor. Energy saving benefit on motor and compressor wattage consumption: ENErGY consumption comparison: with PSc vs EcM vs SmartSpeed Evaporator Fan Motors ompressor w/ PS ompressor w/ EM Energy consumption (Watt-Hours) compressor w/ SmartSpeed ADDITIONAL ENERGY SAVINGS WHEN USING SMARTSPEED EVAPS EVAP w/ PS EVAP w/ EM EVAP with SmartSpeed time (minutes) Note: Data collected on a typical freezer application with a 3HP low temp condensing unit and a 4 fan evaporator INSTALLATION NOTES E motors are factory wired for SmartSpeed operation on evaporators equipped with a factory installed thermostat. For SmartSpeed operation on Evaporators without a factory installed thermostat, a field wired SPDT type thermostat is required. T30--PDI /04/12

17 WIRING DIAGRAM - 115/1/60, /1/60 OPTIONAL E MOTORS with AIR DEFROST MODELS EM T30--PDI /04/12

18 WIRING DIAGRAM /1/60 OPTIONAL E MOTORS with ELETRI DEFROST MODELS EM T30--PDI /04/12

19 WIRING DIAGRAM /1/60 OPTIONAL E MOTORS with ELETRI DEFROST MODELS - MULTIPLE S EM T30--PDI /04/12

20 WIRING DIAGRAM /1/60 OPTIONAL E MOTORS w/ + ELETRI DEFROST MODELS EM T30--PDI /04/12

21 Air Defrost Models SHIPPING WEIGHTS Electric Defrost Models MODEL NUMBER SHIPPING WEIGHT LB. (kg) 104MA 45 (20) 106MA 47 (21) 107MA 49 (22) 209MA 70 (32) 211MA 74 (33) 214MA 78 (35) 317MA 101 (46) 320MA 107 (48) 423MA 117 (53) 426MA 135 (61) 532MA 163 (74) 639MA 192 (87) MODEL NUMBER SHIPPING WEIGHT LB. (kg) 104ME 104LE 103VE 49 (22) 106ME 105LE 104VE 51 (23) 107ME 106LE 105VE 53 (24) 209ME 207LE 206VE 76 (34) 211ME 209LE 208VE 80 (36) 214ME 211LE 209VE 84 (38) 317ME 314LE 312VE 109 (49) 320ME 317LE 315VE 115 (52) 423ME 419LE 416VE 127 (58) 426ME 422LE 419VE 145 (66) 532ME 527LE 523VE 176 (80) 639ME 631LE 627VE 207 (94) T30--PDI /04/12

22 DIMENSIONAL DATA 15 7/8 [403].438 SLOTS IN MOUNTING BRAKETS AIR THROW APPROX 35' IN OPEN SPAE REFRIGERATION ONNETIONS. SUTION & LIQUID. 6 1/2 [165] 4 [102] TYP A B 6 1/2 [165] ELETRIAL ONNETIONS. 1 3/8 3 [35] [76] 3/4 MPT / 3/4 FLARE DRAIN ONNETION 13 7/16 [341] MTG SLOTS 1, 2 AND 3 MODELS. (TOP VIEW) 12 [305] 11 7/8 [302] 3 1/8 [79] MINIMUM 6 1/2 [165] A B 13 7/16 [341] MTG SLOTS 4, 5 AND 6 MODELS. (TOP VIEW) MODEL NO. OF S A B SUTION LIQUID ONNETION (ID) ONNETION SWEAT IN (mm) IN (mm) IN (mm) (ID) SWEAT R22 R404A 104M^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 106M^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 107M^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 209M^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 211M^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 214M^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 317M^ /4 (1581) 49 1/4 (1251) N/A N/A 7/8 3/8 3/8 320M^ /4 (1581) 49 1/4 (1251) N/A N/A 7/8 3/8 3/8 423M^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 3/8 426M^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 3/8 532M^ /4 (2394) 32 5/8 (829) 48 5/8 (1235) 1 3/8 3/8 3/8 639M^ /4 (2800) 48 5/8 (1235) 48 5/8 (1235) 1 3/8 3/8 3/8 104L^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 105L^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 106L^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 207L^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 209L^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 211L^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 314L^ /4 (1581) 49 1/4 (1251) N/A N/A 7/8 3/8 3/8 317L^ /4 (1581) 49 1/4 (1251) N/A N/A 1 1/8 3/8 3/8 419L^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 1/2 422L^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 1/2 527L^ /4 (2394) 32 5/8 (829) 48 5/8 (1235) 1 3/8 3/8 1/2 631L^ /4 (2800) 48 5/8 (1235) 48 5/8 (1235) 1 3/8 3/8 1/2 103V^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 104V^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 105V^ /4 (768) 17 1/4 (438) N/A N/A 5/8 3/8 3/8 206V^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 208V^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 209V^ /4 (1175) 33 1/4 (845) N/A N/A 7/8 3/8 3/8 312V^ /4 (1581) 49 1/4 (1251) N/A N/A 7/8 3/8 3/8 315V^ /4 (1581) 49 1/4 (1251) N/A N/A 1 1/8 3/8 3/8 416V^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 1/2 419V^ /4 (1988) 32 5/8 (829) 32 5/8 (829) 1 1/8 3/8 1/2 523V^ /4 (2394) 32 5/8 (829) 48 5/8 (1235) 1 3/8 3/8 1/2 627V^ /4 (2800) 48 5/8 (1235) 48 5/8 (1235) 1 3/8 3/8 1/2 ^ = A or E. Refer to Nomenclature for details T30--PDI /04/12

23 REOMMENDED EXPANSION VALVE SELETIONS MEDIUM TEMPERATURE MODELS MODEL FATORY INSTALLED NOZZLE R404A R507 R22 R M N/A TUAE-R404A-4-N TUAE-R22-4-N 106M L-1/2 TUAE-R404A-5-N TUAE-R22-5-N 107M L-1/2 TUAE-R404A-6-N TUAE-R22-5-N 209M L-3/4 TUAE-R404A-7-N TUAE-R22-6-N 211M L-1 TUAE-R404A-7-N TUAE-R22-6-N 214M L-1 TUAE-R404A-8-N TUAE-R22-7-N 317M L-1 1/2 TUAE-R404A-8-N TUAE-R22-8-N 320M L-1 1/2 TUAE-R404A-9-N TUAE-R22-8-N 423M L-2 TUAE-R404A-9-N TUAE-R22-8-N 426M L-2 TAE-R404A-T1-N TUAE-R22-9-N 532M L-2 1/2 TAE-R404A-T2-N TUAE-R22-9-N 639M G-3 TAE-R404A-T3-N TAE-R22-T1-N If using 407, superheat setting must be adjusted by turning turns clockwise. Above selections based on: 1) 100 F (38 ) vapor free liquid entering expansion valve 2) 110 F (43 ) ondensing temperature 3) 8-12 F ( ) evaporator TD If correct nozzle is not available, the proper orifice size can be drilled in the field using the following chart NOZZLE ORIFIE No. Drill SIZE IN. 1/ / / / MODEL LOW TEMPERATURE R404A R507 MODELS FATORY INSTALLED NOZZLE 0 F (-18 ) EVAP. -10 F (-23 ) EVAP. -20 F (-29 ) EVAP.* -30 F (-34 ) EVAP. -40 F (-40 ) EVAP. 104L L-1/2 TUAE-R404A-5-N TUAE-R404A-5-NM TUAE-R404A-6-NM TUAE-R404A-7-NM TUAE-R404A-6-NM 105L L-3/4 TUAE-R404A-6-N TUAE-R404A-6-NM TUAE-R404A-6-NM TUAE-R404A-7-NM TUAE-R404A-7-NM 106L L-1 TUAE-R404A-6-N TUAE-R404A-6-NM TUAE-R404A-7-NM TUAE-R404A-7-NM TUAE-R404A-7-NM 207L L-1 TUAE-R404A-7-N TUAE-R404A-7-NM TUAE-R404A-7-NM TUAE-R404A-8-NM TUAE-R404A-8-NM 209L 1-1/2 TUAE-R404A-8-N TUAE-R404A-8-NM TUAE-R404A-8-NM TUAE-R404A-9-NM TUAE-R404A-8-NM 211L L-2 TUAE-R404A-8-N TUAE-R404A-8-NM TUAE-R404A-9-NM TUAE-R404A-9-NM TUAE-R404A-9-NM 314L L-2 TUAE-R404A-9-N TUAE-R404A-9-NM TUAE-R404A-9-NM TAE-R404A-T1-NM TAE-R404A-T1-NM 317L L-3 TUAE-R404A-9-N TUAE-R404A-9-NM TAE-R404A-T1-NM TAE-R404A-T2-NM TAE-R404A-T1-NM 419L L-3 TAE-R404A-T1-N TAE-R404A-T1-NM TAE-R404A-T2-NM TAE-R404A-T2-NM TAE-R404A-T2-NM 422L G-4 TAE-R404A-T2-N TAE-R404A-T2-NM TAE-R404A-T2-NM TAE-R404A-T3-NM TAE-R404A-T2-NM 527L G-4 TAE-R404A-T2-N TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM 631L G-5 TAE-R404A-T3-N TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM 103V L-1/2 TUAE-R404A-4-N TUAE-R404A-4-NM TUAE-R404A-5-NM TUAE-R404A-6-NM TUAE-R404A-6-NM 104V L-3/4 TUAE-R404A-5-N TUAE-R404A-5-NM TUAE-R404A-6-NM TUAE-R404A-7-NM TUAE-R404A-6-NM 105V L-1 TUAE-R404A-6-N TUAE-R404A-6-NM TUAE-R404A-6-NM TUAE-R404A-7-NM TUAE-R404A-7-NM 206V L-1 TUAE-R404A-7-N TUAE-R404A-7-NM TUAE-R404A-7-NM TUAE-R404A-8-NM TUAE-R404A-8-NM 208V L-1 1/2 TUAE-R404A-7-N TUAE-R404A-7-NM TUAE-R404A-8-NM TUAE-R404A-8-NM TUAE-R404A-8-NM 209V L-2 TUAE-R404A-8-N TUAE-R404A-8-NM TUAE-R404A-8-NM TUAE-R404A-9-NM TUAE-R404A-9-NM 312V L-2 TUAE-R404A-8-N TUAE-R404A-9-NM TUAE-R404A-9-NM TUAE-R404A-9-NM TUAE-R404A-9-NM 315V L-2 1/2 TUAE-R404A-9-N TUAE-R404A-9-NM TUAE-R404A-9-NM TAE-R404A-T1-NM TAE-R404A-T1-NM 416V L-2 1/2 TUAE-R404A-9-N TAE-R404A-T1-NM TAE-R404A-T1-NM TAE-R404A-T1-NM TAE-R404A-T1-NM 419V G-3 TAE-R404A-T1-N TAE-R404A-T1-NM TAE-R404A-T1-NM TAE-R404A-T2-NM TAE-R404A-T2-NM 523V G-4 TAE-R404A-T2-N TAE-R404A-T2-NM TAE-R404A-T2-NM TAE-R404A-T3-NM TAE-R404A-T3-NM 627V G-5 TAE-R404A-T3-N TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM TAE-R404A-T3-NM Above selections based on: 1) 100 F (38 ) vapor free liquid entering expansion valve 2) 110 F (43 ) ondensing temperature 3) 8-12 F ( ) evaporator TD * Note: Pre-selected models based on these conditions T30--PDI /04/12

24 INSTALLATION The installation and start-up of evaporators should only be performed by qualified refrigeration mechanics. This equipment should be installed in accordance with all applicable codes, ordinances and local by-laws. INSPETION Inspect all equipment before unpacking for visible signs of damage or loss. heck shipping list against material received to ensure shipment is complete. IMPORTANT: Remember, you, the consignee, must make any claim necessary against the transportation company. Shipping damage or missing parts, when discovered at the outset, will prevent later unnecessary and costly delays. If damage or loss during transport is evident, make claim to carrier, as this will be their responsibility, not the manufacturer s. Should carton be damaged, but damage to equipment is not obvious, a claim should be filed for concealed damage with the carrier. IMPORTANT: The electrical characteristics of the unit should be checked at this time to make sure they correspond to those ordered and to electrical power available at the job site. Save all shipping papers, tags and instruction sheets for reference by installer and owner. APPLIATION evaporators are designed for walker-in cooler and freezer applications used with refrigerant R22 or R404A. For room temperatures above 35 F (2 ) AND evaporating temperatures above 26 F (-3 ), positive defrosting means (electric) may not be required, otherwise, electric defrost defrost models should be used. Electric defrost models come with defrost termination and fan delay as standard to control the defrost cycle termination and fan delay, while defrost initiation means (e.g. defrost timer) is not included. The coil must not be exposed to any abnormal atmospheric or acidic environments. This may result in corrosion to the cabinet and possible coil failure (leaks). (onsult manufacturer for optional baked on phenolic protective coatings). LOATION The unit location in the room should be selected to ensure uniform air distribution throughout the entire space to be refrigerated. Be sure that the product does not obstruct the free circulation of air. Allow a minimum of 24 clearance at each end. Do not locate evaporators over doors. onsideration should be given to the coil location in order to minimize the piping run length to the condensing unit and floor drain. INSTALLATION INSTRUTIONS EXPANSION VALVE (TXV) PRE-SELETED Locate the expansion valve bulb on a horizontal length of suction line preferably 3 to 6 inches from the suction header. Locate the bulb at 4 or 8 clock position and insulate with a waterproof type of insulation. lamp the bulb to ensure 100% contact of the bulb with the suction line. After following the manufacturer s installation instructions and after the room has reached the desired temperature the valve superheat should be checked. This will confirm that the evaporator is operating properly and performing to maximum efficiency. The superheat should be around 6 (3.3 O ) to 8 O F (4.4 O ) for a 10 to 12 O F T.D (5.6 to 6.7 O ). Too high or low a super heat will result in unsatisfactory system performance and possible compressor problems. MOUNTING Refer to dimensional drawing for recommended mounting arrangements. Ensure adequate clearance is provided behind the coil as well as each end. The evaporators may be mounted flush with ceiling with bolts, or hanging down with rod hangers. When using rod hangers, allow adequate space between the top of the unit and the ceiling for cleaning to comply with NSF Standard 7. Ensure that the ceiling is level since the drain pan has been sloped for drainage during the defrost cycle. DRAIN LINE The drain line should be run from the drain connection, sloping at least 1 (25 mm) per foot and should have the size at least as large as the drain connection. A P-Trap in a warm area outside the room must be provided to allow proper draining through the tubing. onnection should be made to proper drainage facilities that comply with local regulations. To prevent freeze-up when the temperature of the refrigerated space is 35 o F (2 ) or lower, the drain line should be heated along its run inside the cold room. The heated drain line should be insulated. It is recommended that the heater be energized at all times. A heat input of 20 watts per foot in a 28 F (-2 ) room and 30 watts per foot for -20 F (-29 ) rooms, is satisfactory. Drain line heaters are not required for constant room temperature above 35 F (2 ). Always trap evaporator drain line individually to prevent vapor migration. Ensure that the drain line has sufficient slope for proper drainage (prevention of ice build up/blockage in pan). T30--PDI /04/12

25 PIPING Refrigeration grade piping must be used for all field refrigeration piping. Refrigerant line sizes are important and may not be the same size as the coil connections. onsult ASHRAE handbook or other similar reference book for proper line sizing. Refrigerant piping and control system should be designed to prevent possible liquid slugging (from oil or refrigerant) of the compressors on start-up after the defrost cycle. Also, it should prevent oil logging and minimize refrigerant pressure drop. WIRING Wire system in accordance with governing standards and local codes. See data and wiring diagrams on pages 4 to 20 for typical wiring arrangement. Electrical wiring is to be sized in accordance with minimum circuit ampacity rating (MA). Size fuses used must not exceed the Maximum Fuse Size ratings. For ease of identifying the proper wiring terminal, unit wiring is color coded and terminal block connections are identified. When fan delay thermostats (combination fan delay and defrost termination) are installed, on start-up, the fans do not operate until the coil temperature is reduced to approximately 25 o F (-4 ). It is normal for the fans to cycle a few times until the room temperature is brought down. At higher evaporating temperatures this control may not close and therefore should either be by-passed temporarily or replaced with an adjustable type. (set for a higher temperature cut-in point). MAINTENANE The unit should be periodically inspected for any dirt or ice build-up on the fin surface and cleaned if necessary with a soft whisk or brush. Also ensure coils inner (and outer) drain pans do not have any ice build-up from improper defrost operation. When replacing heater elements first remove heater retainer brackets and heater clips. INSTALLATION INSTRUTIONS SYSTEM HEK Before Start-Up: 1. All wiring should be in accordance with local codes. 2. Refrigerant lines should be properly sized. 3. Thorough evacuation and dehydration has been performed. 4. The suction, discharge, and receiver service valves must be open. 5. The system preferably include a liquid line filter drier moisture indicator and suction filter. 6. Pour enough water into the drain pan to allow a good check on drainage and seal the trap. After Start-Up: 1. heck the oil level to be sure the oil charge is correct. 2. On initial start up the fans do not start until coil temperature is pulled down to approximately 25 F (-4 ) on the coil. Also, it is normal for the fan to cycle a few times until the room temperature is pulled down. 3. If necessary, temporarily by-pass fan delay control (to run fans until room temp is lowered). 4. Be sure that the expansion valve is properly set to provide the correct amount of superheat. 5. After the box temperature is close to reaching the desired temperature, the evaporator superheat must be checked and adjustment made if necessary. In general, evaporators running with a TD of 10 F (5.6 ) should have a superheat reading of 6 to 8 F (3.3 to 4.4 ). For evaporators with another T.D., the general rule is that the superheat should be around 60 to 80% of T.D. 6. Heavy moisture loads are usually encountered when starting the system for the first time. This may cause a rapid build-up of frost on the evaporator. During the initial pull down, we suggest that the frost build-up be watched and defrosted manually as required. 7. Observe that the system goes through at least one complete DEFROST YLE. T30--PDI /04/12

26 Miscellaneous GENERI SERVIE PARTS DESRIPTION PART # DESRIPTION PART # MOTOR 115V (PS) TERMINAL BOARD: AIR DEFROST (115v, V) MOTOR V (PS) TERMINAL BOARD: AIR DEFROST (460V) MOTOR 460V (PS) INSULATOR, for 460V terminal board # MOTOR 115V (E) TERMINAL BOARD: ELETRI DEFROST (208- MOTOR V (E) V) MOTOR MOUNT TERMINAL BOARD: ELETRI DEFROST (460V) BLADE (PS MOTOR) HINGE ASSY # GA-2 X2 OP-STAINLESS BLADE (E MOTOR) STEEL GUARD (PLASTI) DRAIN FITTING GUARD (WIRE) LOKNUT - DRAIN FITTING AORN NUT #N1/4-20 PANTONE GREY# GASKET - DRAIN FITTING LOKNUT 1/4-20-UN for use with WIRE GUARD HANGER BRKT LP HEATER RETAINER LIP-OIL (WIRE LIP) SREWS: #12 x 5/8 lg HEATER HOLD DOWN BRKT-DRAIN PAN DELAY DETROST TERMINATION HEATER SAFETY SWITH - ALL ED MODELS Defrost Heaters MODELS OIL FAE HEATER (3 REQUIRED) PART NUMBER DRAIN PAN HEATER (1 REQUIRED) V 460V V 460V 104ME 104LE 103VE 269W / W / W / W / ME 105LE 104VE 269W / W / W / W / ME 106LE 105VE 269W / W / W / W / ME 207LE 206VE 495W / W / W / W / ME 209LE 208VE 495W / W / W / W / ME 211LE 209VE 495W / W / W / W / ME 314LE 312VE 721W / W / W / W / ME 317LE 315VE 721W / W / W / W / ME 419LE 416VE 947W / W / W / W / ME 422LE 419VE 947W / W / W / W / ME 527LE 523VE 1174W / W / W / W / ME 631LE 627VE 1400W / W / W / W / Drain Pan Assemblies NUMBER OF S AIR DEFROST - MA MODELS ELETRI DEFROST - ME, LE & VE MODELS Drain pan assemblies include drain fitting, hinge and heater hold down brackets when applicable. Drain pan assemblies do not include heaters or hot gas loops. T30--PDI /04/12

27 Finished Goods Warranty The terms and conditions as described below in the General Warranty Policy cover all products manufactured by National Refrigeration. GENERAL WARRANTY POLIY Subject to the terms and conditions hereof, the ompany warrants all Products, including Service Parts, manufactured by the ompany to be free of defects in material or workmanship, under normal use and application for a period of one (1) year from the original date of installation, or eighteen (18) months from the date of shipment from the ompany, whichever occurs first. Any replacement part(s) so supplied will be warranted for the balance of the product s original warranty. The part(s) to be replaced must be made available in exchange for the replacement part(s) and reasonable proof of the original installation date of the product must be presented in order to establish the effective date of the warranty, failing which, the effective date will be based upon the date of manufacture plus thirty (30) days. Any labour, material, refrigerant, transportation, freight or other charges incurred in connection with the performance of this warranty will be the responsibility of the owner at the current rates and prices then in effect. This warranty may be transferred to a subsequent owner of the product. THIS WARRANTY DOES NOT OVER (a) Damages caused by accident, abuse, negligence, misuse, riot, fire, flood, or Acts of God (b) damages caused by operating the product in a corrosive atmosphere (c) damages caused by any unauthorized alteration or repair of the system affecting the product s reliability or performance (d) damages caused by improper matching or application of the product or the product s components (e) damages caused by failing to provide routine and proper maintenance or service to the product (f) expenses incurred for the erecting, disconnecting, or dismantling the product (g) parts used in connection with normal maintenance, such as filters or belts (h) products no longer at the site of the original installation (i) products installed or operated other than in accordance with the printed instructions, with the local installation or building codes and with good trade practices (j) products lost or stolen. No one is authorized to change this WARRANTY or to create for or on behalf of the ompany any other obligation or liability in connection with the Product(s). There is no other representation, warranty or condition in any respect, expressed or implied, made by or binding upon the ompany other than the above or as provided by provincial or state law and which cannot be limited or excluded by such law, nor will we be liable in any way for incidental, consequential, or special damages however caused. The provisions of this additional written warranty are in addition to and not a modification of or subtraction from the statutory warranties and other rights and remedies provided by Federal, Provincial or State laws. System PROJET INFORMATION Model Number Serial Number Refrigerant Electrical Supply Date of Start-Up Service ontractor Phone Fax T30--PDI /04/12

28 AS BUILT SERVIE PARTS LIST Service Parts List Label To Be Attached HERE NATIONAL REFRIGERATION & AIR ONDITIONING ANADA ORP. 159 Roy Blvd. Brantford Ontario anada N3R 7K1 PHONE: (519) FAX (519) Due to National Refrigeration s policy of continuous product improvement, we reserve the right to make changes without notice. 05/04/12