ACNF Series Ceiling-Mount Air Handlers 1½ to 2½ Tons

Transcription

1 ANF Series eiling-mount Air Handlers 1½ to 2½ Tons Standard Features Suitable for use with refrigerants R-410A and R-22 heck flowrater for heat pump and cooling-only applications All-Aluminum tube/aluminum fin coil Direct-drive, resilient-mount, multi-speed motor Sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 and 10 kw High-efficiency evaporator coil Quiet operation Available with and without heat AHRI ertified ETL Listed Primary/secondary drain connection in a high-temperature plastic drain pan Suitable for free-return installation (non-ducted return air) Galvanized-steel construction Factory-installed pull-type disconnect Easy service access ontents Nomenclature...2 Heat Kit Data...2 Product Specifications...3 Dimensions...5 Airflow Data...6 Wiring Diagram...7 Accessories...8 * omplete warranty details available from your local dealer or at www. goodmanmfg.com. To receive the 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in alifornia or Québec. SS-GANF 7/14 Supersedes 5/14

2 Nomenclature A N F AA ,6 7, ,12 Brand Engineering * A - Single- Piece Air Handler Major/ Minor Revisions Unit Application - eiling Mount PS Motor abinet Finish N - Uncased Expansion Device F - Flowrater Nominal apacity Range 18 = 2 Tons 24 = 2 Tons 30 = 2½ Tons *Not used for inventory management Refrigerant 6 = R- 410A or R- 22 Electrical 1-208/230 V, 1 Phase, 60 Hz 00 = No Heat 05 = 5 kw Heater Kit 06 = 6 kw 08 = 8 kw 10 = 10 kw 2 SS-GANF

3 Specifications ANF ANF ANF ANF Performance Ratings ooling (BTU/h) 18,000 18,000 18,000 18,000 24,000 24,000 24,000 Airflow Rate FM (High/ Low) ¹ 660/ / / / / / /840 Piston Size ² Blower Diameter Width oil connections Liquid ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" Suction ¾" ¾" ¾" ¾" ¾" ¾" ¾" oil Drain onnect (FPT) 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Electrical Data Voltage 208/ / / / / / /230 Minimum ircuit Ampacity 230V Minimum ircuit Ampacity 208V Max. Overcurrent Device (230V) Max. Overcurrent Device (208V) Minimum Voltage VA Maximum Voltage VA Blower Motor Full Load Amps (FLA) Horsepower (HP) 1/8 1/8 1/8 1/8 1/4 1/4 1/4 Electric Heat 230 Volts Volts 0 16,400 20,500 24, ,400 20,500 Ship Weight (lbs) ¹ static ² Shipped with oil Notes For a properly matched system and piston sizing information, refer to Amana piston kit chart of the corresponding Amana outdoor unit. When the room thermostat calls for second stage heat, the first stage (heat pump) operation must be locked out. When matching the A unit that has electric heat with a heat pump, order HEAT PUMP SHUT OFF KIT HPSK-01. The AXX-00 units do not require this kit. SS-GANF 3

4 Specifications (cont.) Performance Ratings ooling (BTU/h) 24,000 24,000 30,000 30,000 30,000 30,000 30,000 Airflow Rate FM (High/ Low)¹ 880/ / / / / / /890 Piston Size Blower Diameter Width oil connections Liquid ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" ⅜" Suction ¾" ¾" ¾" ¾" ¾" ¾" ¾" oil Drain onnect FPT 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Electrical Data Voltage 208/ / / / / / /230 Minimum ircuit Ampacity 230V Minimum ircuit Ampacity 208V Max. Overcurrent Device (230V) Max. Overcurrent Device (208V) Minimum Voltage VA Maximum Voltage VA Blower Motor Full Load Amps (FLA) Horsepower (HP) 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Electric Heat 230 Volts Volts 24,900 33, ,400 20,500 24,900 33,500 Ship Weight (lbs) ¹ static Notes:s When the room thermostat calls for second stage heat, the first stage (heat pump) operation must be locked out. When matching the A unit that has electric heat with a heat pump, order HEAT PUMP SHUT OFF KIT HPSK-01. The AXX-00 units do not require this kit. 4 SS-GANF

5 Dimensions LIQUID LINE 21 ELET. HEATER LOATION 3/4 10 D 1 SUTION LINE ONTROL BOX THIS END: SUPPLY VOLTAGE WIRING OPPOSITE END: LOW VOLTAGE WIRING A B FRONT VIEW TOP VIEW SEONDARY DRAIN 3/4" FEMALE NPT PLASTI DRIN PAN PRIMARY DRAIN 3/4" FEMALE NPT Model A B D ANF18 37¼" 34¾" 30" 6½" 43¼" 40¾" 36" 6½" 49¼" 46¾" 42" 6½" SS-GANF 5

6 Airflow Data Model Motor Speed FM delivered against External Static Pressure ANF180*** 0*** 0*** High Low High Low High 1,075 1, Low Note: Airflow data for 240 Vac with dry coil and no filter in place. 6 SS-GANF

7 ANF Wiring Diagram L1 POWER SUPPLY L2 DIS DIS 208/240 VOLTS * FL HTR2 PU FL HTR1 * TL TL * DIS DIS FL HTR2 TL H * * T1 L1 FL HTR1 TL H T 2 L 2 EBTDR EM PU SEE NOTE 1 N NO F LO L1 L2 WH BR T1 T2 BL BL GR XFMR-R R XFMR- G SU EBTDR N NO OM PU F SEE NOTE 4 BL BL YL BR SEE NOTE 1 TR 208V 240V 24V 24V GR WH BR BL GR SEE NOTE 5 SEE NOTE 2 EBTDR OLOR ODE WH WHITE GR GREEN BLAK PU PURPLE RED BR BROWN YL BL R TR YELLOW BLUE 208V 24V HI 240V SEE NOTE 5 WIRE ODE HIGH VOLTAGE FATORY WIRING LOW VOLTAGE HIGH VOLTAGE FIELD WIRING EBTDR LOW VOLTAGE NOTE 2 OMPONENT ODE DIS DISONNET SWITH ONTATOR EM EVAPORATOR MOTOR F FAN APAITOR EBTDR ELETRONI BLOWER TIME TL THERMAL LIMIT DELAY RELAY TR TRANSFORMER FL FUSIBLE LINK HTR HEATER ELEMENT BR SEE NOTE 2 H WH BL OM G GR EM NOTES: 1) TO PLAE UNIT IN LOW SPEED, REMOVE BLAK MOTOR LEAD FROM ELETRONI BLOWER TIME DELAY RELAY (EBTDR) OM TERMINAL AND REPLAE WITH RED MOTOR LEAD 2) SEE OMPOSITE WIRING DIAGRAMS IN INSTALLATION INSTRUTIONS FOR PROPER LOW VOLTAGE WIRING ONNETIONS. USE N.E.. LASS 2 WIRE. 3) ASTERISK (*) INDIATES THAT HEATING ELEMENT, THERMAL LIMIT, ONTATOR, & INTERONNETING WIRES OF HEATER #2 ARE DELETED WITH SINGLE HEATING ELEMENT UNITS. 4) EBTDR HAS A 7 SEOND ON DELAY WHEN "G" IS ENERGIZED AND A 65 SEOND OFF DELAY WHEN "G" IS DE-ENERGIZED. 5) FOR 208VA APPLIATIONS MOVE BOTH RED WIRES TO ENTER TAP 0140A00125-A Wiring is subject to change. Always refer to the wiring diagram on the Warning unit for the most up-to-date wiring. High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. * SS-GANF 7

8 Accessories Model Description HPSK-01 Heat Pump Shut-off Relay Kit Louvered eiling Access Panels AP-1/ 1L AP-2/ 2L AP-3/ 3L Fits ANF18 Fits Fits Goodman Manufacturing ompany, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations Goodman Manufacturing ompany, L.P. Houston, Texas Printed in the USA. 8 SS-GANF