ENERGY EFFICIENCY IN PROCESS INDUSTRIES
|
|
- Francine Meghan Norton
- 5 years ago
- Views:
Transcription
1 Mechanical Engineering College of Engineering, Design and Physical Sciences Institute of Energy Futures Energy Efficient and Sustainable Technologies Theme ENERGY EFFICIENCY IN PROCESS INDUSTRIES Dr Hussam Jouhara BSc (first), PhD, CEng, IntPE, FIMechE, FIEI, MInstR, SFHEA
2 OVERVIEW Waste Heat Recovery HVAC Renewable Energy Advances
3 Conventional Waste Heat Recovery Scenarios
4 21 May 2018 Source: US DOE Presentation Title 4
5 Conventional Waste Heat Recovery Systems
6 Recuperators 21 May 2018 Recuperators recover exhaust gas waste heat in medium to high temperature applications Source: US DOE Presentation Title 6
7 Regenerator 21 May 2018 Source: US DOE Presentation Title 7
8 Regenerator 21 May 2018 Source: US DOE Presentation Title 8
9 Economizers 21 May 2018 Finned tube heat exchangers are used to recover heat from low to medium temperature exhaust gases for heating liquids Presentation Title 9
10 Waste Heat Boilers 21 May 2018 Source: US DOE Presentation Title 10
11 Direct contact heat recovery systems 21 May 2018 Presentation Title 11
12 Waste Heat Recovery in Challenging Scenarios
13 21 May 2018 Why? Presentation Title 13
14 Challenging waste heat recovery scenarios Many industrial processes generate highly difficult exhaust conditions that can be characterised as follows: 1. High temperatures / mass flows 2. High particulate content that is abrasive and / or can cause fouling 3. Highly corrosive, acidic content SO2, SO3, NO2, etc.
15 The Solution Heat Pipe
16 Conventional heat exchangers Heat Pipe heat exchangers Shell & tube heat exchanger Heat pipe heat exchanger running since 2008 Same operational conditions 16
17 Heat Pipes What are they?
18 Low temperature heat pipe Working fluid High temperature heat pipe
19 Multiple Redundancy Each pipe operates independently so unit is not vulnerable to a single pipe failure This prevents cross contamination each heat pipe acts as an additional buffer between the two fluids Intermediate Pipe Working Temperature Allows higher exhaust temperature limits on some applications Better fouling managment Use of smooth pipes allows exchangers to be used in high particulate or oily applications Ease of Cleaning & Maintenance Can be maintained in situ (no uninstall) Manual/automated cleaning systems Highly Scalable, Customisable & Configurable Modular design allows on site assembly Can be designed for future expansion, to meet specific application or operational needs Isothermal Operation no hot or cold spots Eliminates cold corners and condensation Allows greater energy recovery Better longevity for thermal oil Reactivity Fast reaction time, offers different control options and suitable for sensitive apparatus: does not require preheating Robust Materials and Long Life Design allows pipes to freely expand and contract, thus no thermal stress on structure Thick pipe walls resist erosion/corrosion Passive devices No need for pumping energy to drive the heat transfer process through the heat pipe
20
21 Typical geometries of heat pipe based waste heat recovery systems
22 A schematic of a typical heat pipe unit
23 Cross flow HP units: Gas to air
24 Cross flow HP units: Gas to air Hot exhaust Preheated combustion air Cooled exhaust to the new stack Cold combustion air Heat pipe heat exchanger
25 Cross flow HP units: Gas to air 10m HOT STOVES WASTE GAS HEAT RECOVERY
26 STEAM GENERATION FROM WASTE HEAT 21 May 2018 Duty: Circa 6MW Steam generation rate: 8t/h ROI: < 7 months 26
27 Steam Condenser, Food, Dirty Steam, Ireland
28 Throughflow HP units Through-Flow = for exhaust temperatures above 500C
29 SAMPLES OF RECENT PROJECTS G2W, Shale Gas Well Head Fracking, Thermal Oxidiser, Canada 2013
30 21 May 2018 Maintenance Panels Manual cleaning with compressed air or high pressure water Pipes rows are easily accessible by lance Aerodynamic trap Regular dust removal Automated actuator Moving plate system Active vibration device Sonic Horn - Inside unit Cleaning / Anti-clogging Solutions Presentation Title 30
31 Cross flow HP units: A combination of various units
32 Thermal Storage And Heat Recovery System From Process Waste Steam 21 May 2018 Discharging Charging
33 Heat Pipe Based Waste Heat Recovery Systems: Case Studies
34 Exhaust to Coke Gas Unit, Steel mill Blast Furnace, Czech Republic 2011 Gas to Air Exhaust Temp In/Out 286 C/156 C Coke Gas Temp In/Out 62.2 C/197 C Exhaust/Air Mass Flow 97,551/97,551 Kg/h Energy Recovered 12,626 KW Recovered Energy 800K p/a Project Cost 400,000 * Payback Period Circa 6 Months * /KW recovered * * Estimated figures based on extrapolated installed costs Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Heat pipe GPH 12.6 MW duty Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation Each unit consists of 1575 X 7.6 Mtr helically finned, distilled water stainless steel heat pipes Unit performance increased significantly after upgrade Repeat order secured Sep 2013 delivery Full turnkey replacement delivered through Czech local distributor 34
35 Steam Generator, China National Offshore Oil Corp, China Sea, April 2016 Gas to Steam Exhaust Temp In/Out Water/Steam Temp In/Out Exhaust Flow/Steam Rate Energy Recovered Recovered Energy Project Cost Payback Period 400 C/250 C 50 C/190 C 130,000/ 8,000 Kg/h 6,400 KW 2,100K p/a 1,200K 7 Months /KW recovered 328 Econotherm GA 6400 smooth pipe 2 stage steam generator On-site assembly High reliability required for offshore service Low footprint required by space limitations Low pressure drop, less parasitic load Multi Robust Material Efficient Cleaning & Low Pressure Redundancy Maintenance Drop Instant start up from gas turbine, no pre-heating required Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation 35
36 G2W, In Line Through-Flow Recuperator, Biomass Incinerator, Bologna, Italy Gas to Water Exhaust Temp In/Out 610 C / 150 C Water Temp In/Out 73 C / 90C Exhaust/Water Mass Flow 17,500 Kg/h Weight of unit 5,000 Kg Exhaust pressure drop 400 Pa Energy Recovered 2,100 KW Recovered Energy Value 315K p/a Heat Exchanger Cost 172,500 Payback Period <18 Months Price pe r KW recovered 140/kW Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation GW throughflow heat exchanger 2.1MW waste water treatment plant biomass incinerator plant: highly robust low fouling unit High organic particulate matter in exhaust; removable panels incorporated for cleaning Low fouling, easy cleaning and maintenance, high reliability 36
37 Steam Condenser, Food, Dirty Steam, Ireland, 2010 Steam Condenser / Hot Water Steam Temp In/Out 105 C/ 95 C Water Temp In/Out 10 C/ 88 C Exhaust/Water Mass Flow 844 / 8,000 Kg/h Weight of unit 300 Kg Exhaust pressure drop N/A Energy Recovered 446 KW Recovered Energy Value 2 x 20K p/a Heat Exchanger Cost 2 x 10K Payback Period 6 Months Price per KW recovered 22 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation SC model 400 smooth/finned hybrid pipe through-flow heat exchanger 440 kw process water heater Contaminated steam; regulatory requirement to condense, fuel savings, stainless steel Eliminated existing air-cooled equipment 37
38 3 Kiln Heat Recovery, RAK Ceramics, UAE, April 2016 Gas to Air Exhaust Temp In/Out 235 C/162 C Air Temp In/Out 34 C/160 C Exhaust/Air Mass Flow 41,771/ 27,400 Kg/h Energy Recovered 970 KW Recovered Energy 209K p/a Project Cost 190K Payback Period 11 Months /KW recovered 195 GA 970 smooth pipe heat exchanger 970 kw drier air pre-heater sourcing exhaust from 3 tunnel kilns Pre-heated air delivered to multiple usage points High particulate matter exhaust from kilns Integrated moving plate cleaning system
39 TDO Heat Pipe Recovery, COSMO Films Limited, February 2016 Exhaust to Air Exhaust Temp In/Out Air Temp In/Out Exhaust/Air Mass Flow Energy Recovered 140 C/80 C 35 C/105 C 13,200 Kg/h 219 kwth Recovered Energy Project Cost Payback Period /KW recovered GA 970 smooth pipe heat exchanger Reduced energy consumption by returning existing heat energy - Up to 220 kw per hour Improvement of film quality by - Preheated fresh air - Reduced temperature differences - Reduced pressure differences Higher air conformity in the TDO oven Less maintenance in the TDO - By controlled absorption of condensate - By simple collection and removal Less emission to the environment Less condensate at slots, holes and cold bridges by - Reduced flow of cold air - Controlled overpressure in the oven
40 Air Pre-Heater, Dow Chemicals, Freeport, Texas Gas to Air Exhaust Temp In/Out 360 C/142 C Air/ Temp In/Out 26 C/254 C Exhaust/Air Flow Rate 46,856/ 49,124 Kg/h Energy Recovered 3,100 KW Recovered Energy 563K p/a Project Cost 750K Payback Period 19 Months /KW recovered 241 GA 3100 finned pipe counter flow air pre-heater Ethylene cracking furnace combustion air pre-heater Distilled water working fluid pipes ASME design code compliant, fully NDT tested Carbon steel finned pipe design
41 Multi-stage, in series, steam/water, natural gas, Spirax Sarco Italy 2012 Multi-stage Steam Generator and Water Pre-Heater Exhaust Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 420 C/ 160 C 160 C/ 198 C (12 bar) 11,484/ 900 Kg/h 1852 Kg 700 Pa 520 KW 19K p/a Heat Exchanger Cost 19K Payback Period 60 Months Price per KW recovered 36 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Anaerobic digester genset in food industry Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation 1 stage of 198C/12 Bar steam generation, left hand side 2 stages of water heating delivered by 2 standard modules, visible on right of unit Pipes screwed in from underneath on standard modules; modules can be removed individually Hinged access doors for easy cleaning, sealing nuts will be replaced by latches on future units 41
42 Gas to Air Unit, Automotive, Aluminium Furnace, USA 2008 Gas to Air Exhaust Temp In/Out Air Temp In/Out Exhaust/Air Mass Flow Energy Recovered Recovered Energy 400 C/266 C 30 C/293 C 12,000/ 6,374 Kg/h 528 KW $155K p/a Project Cost $150K Payback Period 16 Months $/KW recovered $123 ( 76) Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Econotherm GA 360 smooth pipe heat exchanger Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation 500 kw combustion air pre-heater High particulate matter exhaust from furnace Low fouling, easy cleaning and maintenance, high reliability Unit positioned outside main factory premises Customer advised it was not possible by consultants (acid etc) 42
43 Gas to Air Unit, Antique Ceramics, Horizontal Roller Kiln, India 2010 Gas to Air Exhaust Temp In/Out Air Temp In/Out Exhaust/Air Mass Flow Weight Pressure drop Energy Recovered Recovered Energy Project Cost 316 C/ 122 C 35 C/ 215 C 9,800 Kg/h/ 12,000 Kg/h 8000 kg 392 Pa 606 KW RS 4.5m p/a RS 6m Econotherm GA 360 smooth pipe heat exchanger Prior attempts to deploy conventional equipment resulted in unit failures and lost investment 600 kw combustion air pre-heater Highly acidic (SO2), sticky particulate matter exhaust from kiln dryer exhaust Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Innovative automatic pipe cleaning mechanism: moving plate system Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation 43
44 Conoco Phillips Gas Compressor Station, Canada 2012 Gas to Water Exhaust Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 454 C/ 180 C 50 C/ 90 C 28,567/14,470 Kg/h 14,470 Kg/h 5,100 Kg 750 Pa 1,200 KW 180K p/a Heat Exchanger Cost 45K Econotherm GW 1200 finned to finned pipe heat exchanger 1.2MW process water heater (Genset) Remote location: chosen for high reliability, no single point of failure, low fouling, easy cleaning and low maintenance, small footprint and weight Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Client indicates they will order many more once first is proven Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation 44
45 G2W, Shale Gas Well Head Fracking, Thermal Oxidiser, Canada 2012 Gas to Water Exhaust Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 816 C/ 150 C 5 C/ 16 C 11,016/180,000 Kg/h 3,600 Kg 800 Pa 2,260 KW 360K p/a Heat Exchanger Cost 65K Payback Period <3 Months Price per KW recovered 27 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation GW 2000 hybrid pipe heat exchanger 2.2MW fracking water heater: highly robust mobile unit for travelling around Canada High particulate matter exhaust from furnace; removable panels incorporated for cleaning Low fouling, easy cleaning and maintenance, high reliability 45
46 Biofuel plant gensets,, UK 2012 Gas to Water two pressure vessels Exhaust Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value Heat Exchanger Cost Payback Period 440 C/ 371 C 75 C/ 98 C 46,500/ 36, 210 Kg/h 1,556 Kg 850 Pa 750 KW 175K p/a 16,675K 1 Month Price per KW recovered 17 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Scalable & Reactivity Isothermal Econotherm GW 650 double water vessel heat exchanger Temperatures Customisable Operation 750 kw unit, low pressure drop The reason for the shape was the large duct diameter, necessitating a large cross sectional area on our unit. However they only needed to recover a small amount of energy to get the maximum grant - hence a small temperature drop. This meant a lot of heat pipes across the unit, but only a small number of rows. The shape necessitated two water 46
47 Gas to Water unit, Building Materials, Steam, Italy 2012 Gas to Water (pressurised) Exhaust Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 490 C/ 119 C 112 C/ 116 C (5 bar) 7,300/ 220,000 Kg/h 1,500 Kg 800 Pa 1023 KW 180K p/a Heat Exchanger Cost 20K Payback Period <3 Months Price per KW recovered 18 ( 15) Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation Higher than expected / better performance than heat exchanger previously installed: Primary Smoke Ti = 525 C T = 154 C Q = 7314 kg / h; Secondary hot water Ti = 115 C T = CQ = 300,000 kg / h., Energy Potential = 871 kw We have found in the field to the new heat exchanger the following data: Primary Smoke Ti = 490 C T = 119 C range not measured; Secondary hot water Ti = 112 C T = 116 CQ = 220,000 kg / h; Energy Potential = 1023 kw From the above it can be seen that we have improved the performance of the system, increasing the recovered heat by 15% and for this we about the construction company Spirax-Sarco. Replaced much larger shell and tube system 47
48 Biomass Incinerator, exhaust G2O or G2W, Air Burners, USA Water or thermal oil for ORC energy generation Exhaust Temp In/Out Water /Glycol Temp In/ Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 950 C/ 600 C 203 C/ 254 C (12 bar) 28,800/ 57,000 Kg/h 4320 Kg 450 Pa 760 KW 140K p/a Heat Exchanger Cost 25K Payback Period <3 Months Price per KW recovered 32 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Mobile thermal oxidiser for use in forestry and other mobile applications Low Fouling Working Temperatures Scalable & Customisable Reactivity Isothermal Operation Process - or for ORC energy generation - hot water or thermal oil Range of capacities High temperature 48
49 Gas to Oil unit, Waste Processing Plant, Pyrolysis Gas to Oil (for ORC) Exhaust Temp In/Out Oil Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 1000 C/ 250 C 135 C/ 280 C 4,150/ 9,200 Kg/h 1,800 Kg 650 Pa 940 KW 150K p/a Heat Exchanger Cost 25K Payback Period 3 Months Price per KW recovered 23 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation GW940, smooth/finned hybrid pipe through-flow heat exchanger 940 kw thermal oil heater; very high inlet exhaust temperature catered for by through-flow model To feed and ORC engine to generate electricity Very high particulate matter exhaust from furnace; removable panels incorporated for cleaning Low fouling, easy cleaning and maintenance, high reliability 49
50 Steam Condenser, Food, Dirty Steam, Ireland, 2010 Steam Condenser / Hot Water Steam Temp In/Out Water Temp In/Out Exhaust/Water Mass Flow Weight of unit Exhaust pressure drop Energy Recovered Recovered Energy Value 105 C/ 95 C 10 C/ 88 C 844 / 8,000 Kg/h 300 Kg N/A 446 KW 2 x 20K p/a Heat Exchanger Cost 2 x 10K Payback Period 6 Months Price per KW recovered 22 Multi Redundancy Robust Material Efficient Cleaning & Maintenance Low Pressure Drop Low Fouling Working Scalable & Reactivity Isothermal Temperatures Customisable Operation SC model 400 smooth/finned hybrid pipe through-flow heat exchanger 440 kw process water heater Contaminated steam; regulatory requirement to condense, fuel savings, stainless steel Eliminated existing air-cooled equipment 50
51 Installed Units
52 21 May 2018 Heat Pipe based HVAC Systems Presentation Title 52
53 Heat Pipe based Radiator (Jouhara & Robinson, 2010)
54 Energy efficient Air Conditioning Systems. Conventional dehumidification method
55 Heat pipe based dehumidification method
56 Waste Heat Recovery, Loop HP HEX
57 Humidity ratio - g/kg(a) Humidity ratio - g/kg(a) Pressure: Pa Waste Heat Recovery, Loop HP HEX Pressure: Pa Enthalpy - kj/kg(a) Saturation temperature - deg C 30 1 Coil Energy Load 52kW Coil Energy Load 52 kw 0.90 Volume - cu.m/kg(a) The assumed humid air mass flow rate is 1 kg/s Enthalpy - kj/kg(a) Saturation temperature - deg C Coil Energy Load 47kW Coil Energy Load 47 kw 0.90 Volume - cu.m/kg(a) % % % 40% 20% 0.85 Heater Energy Consumption 7.2kW (Electric) Heater Energy Consumption 7.2 kw (Electric) % Heating Energy Consumption 0kW 40% 20% Dry bulb temperature - deg C Dry bulb temperature - deg C The chilled coil becomes 10% smaller and no heaters are needed. (Jouhara, 2009)
58 Building Waste Heat Recovery SHP HEX Inclination Mechanism
59 21 May 2018 The Heat Mat Solar Roof 59
60 Funded by DECC The Flat Heat Pipe
61
62
63 13/01/16 Presentation Title 63
64 Patents 1. Jouhara, H., Lester, S., (2014), "Heat Transfer Apparatus", UK patent application No Status: Filed. Filing date: 19/06/2014. Applicant: Flint Engineering & Econotherm (UK) ltd. 2. Jouhara, H., Lester, S., (2014), "Radiator", UK patent application No Status: Filed. Filing date: 19/06/2014. Applicant: Flint Engineering.
65 Thank you
Energy recovery from exhaust gases using Heat Pipe technology
Energy recovery from exhaust gases using Heat Pipe technology Energy recovery from industrial flue and exhaust gases can provide large amounts of valuable energy savings, together with significant reductions
More informationThermal Fluid Heaters
Thermal Fluid Heaters Vertical Coil, Vertical Tubeless, Electric and Horizontal Sizes from 75,000 to 40,000,000 BTU/HR The heat transfer innovators. THERMAL FLUID FEATURES AND BENEFITS KEY FEATURES No
More informationNew generation heat exchanger improves industrial energy efficiency
New generation heat exchanger improves industrial energy efficiency Turn waste Heat into Profit By Robert Sakko 14 November 2013 1 Content 1 HeatMatrix introduction 2 Waste heat potential 3 HeatMatrix
More informationHeat pump and energy recovery systems
SBS5311 HVACR II http://ibse.hk/sbs5311/ Heat pump and energy recovery systems Ir. Dr. Sam C. M. Hui Faculty of Science and Technology E-mail: cmhui@vtc.edu.hk Oct 2017 Contents Basic concepts Air-to-air
More informationENERGY RECOVERY SOLUTIONS. Recover wasted energy to increase efficiency and save money immediately.
ENERGY RECOVERY SOLUTIONS Recover wasted energy to increase efficiency and save money immediately. Cleaver-Brooks Engineered Boiler Systems Manufacturers of HRSGs, Waste Heat Recovery Units, and Waste
More informationENERGY OPTIMIZATION IN THE MAA GAS PROCESSING FACILITIES
ENERGY OPTIMIZATION IN THE MAA GAS PROCESSING FACILITIES ABDULLAH AJMI, K.S.SABAPATHI, MUSAALAM AL MOWAIZRI, SHAIMA AL AMEEN PROCESS ENGINEERING MINA AL-AHMADI REFINERY, KNPC Kuwait Oil & Gas Summit and
More informationFig.: macroscopic kinetic energy is an organized form of energy and is much more useful
Harnessing Energy Fig.: macroscopic kinetic energy is an organized form of energy and is much more useful Vapor Power Cycle The vast majority of electrical generating plants are variations of vapor power
More informationNHS Sustainable Development: 14 th February Reduce Energy Consumption Through Steam System Modernisation. National Key Account Manager
NHS Sustainable Development: 14 th February 2012 Reduce Energy Consumption Through Steam System Modernisation Presentation by: Andy Bennett National Key Account Manager 1 Overview 1. Thermal Energy International
More informationCHAPTER 6. HEATING PRODUCTION EQUIPMENT AND SYSTEMS
CHAPTER 6. HEATING PRODUCTION EQUIPMENT AND SYSTEMS 6.1 Types of Heating Systems 6.2 Heating Energy Sources 6.3 Furnaces and Air Heaters 6.4 Boilers 6.5 District Heating 6.6 Selection of Medium- Steam
More informationGF Calorplast Heat Exchangers. Steel Processing Chemical Processing Semiconductor Pharmaceutical Automotive Aerospace
GF Calorplast Heat Exchangers Steel Processing Chemical Processing Semiconductor Pharmaceutical Automotive Aerospace Plating and Metal Surface Finishing Chemical Processing In the Plating and Metal Surface
More informationTopGas Wall Hung Condensing Gas Boiler
TopGas Wall Hung Condensing Gas Boiler Output range 30 to 80 kw Why choose TopGas? TopGas wall-hung boilers offer compact and advanced gas heating technology built to the high quality standards you would
More informationHeat exchangers in Thermo Plate-design Type XPT. + variable + cleanable + efficient + safe FULLY WELDED
Heat exchangers in Thermo Plate-design Type XPT + variable + cleanable + efficient + safe FULLY WELDED The XPT for use in a wide range of applications + The pillow-shaped design of the Thermoplates permits
More information90% Efficiency without Boiler Replacement TRUE GREEN SOLUTIONS NEW. Patent Pending. EcoFlex 90 + System Modulating Fan-Powered Economizer
without Boiler Replacement TRUE GREEN SOLUTIONS NEW Patent Pending EcoFlex + System Modulating Fan-Powered Economizer EcoFlex + System Because They Are Your Btus EcoFlex + System - a packaged modulating
More informationBiomass Drying Commercial Dryers
Biomass Drying Commercial Dryers Mediums: - Air - Flue gas - Superheat Steam Rotary dryer Belt dryer Flash dryer Fluidized bed Advantages Variable particle sizes Reasonable dimension Robust Variable particle
More informationA TRUE GAME CHANGER - The Vortex Heat Recovery Center CONDENSING EFFICIENCIES FOR TRADITIONAL BOILERS & HEATERS
A TRUE GAME CHANGER - The Vortex Heat Recovery Center CONDENSING EFFICIENCIES FOR TRADITIONAL BOILERS & HEATERS Flexibility and Performance - Unlike any other Heat Recovery System FEATURES Exceptional
More informationOIL AND GAS INDUSTRY
FIRED HEATER DESIGN This case study demonstrates the implementation of an API 560 fired heater compound component in Flownex. It also shows how Flownex has been used during the process design and preliminary
More informationINTEC Engineering GmbH Energy systems
INTEC Engineering GmbH Energy systems INTEC Engineering GmbH is an international company successfully operating in the design, delivery, installation and commissioning of energy systems. INTEC has established
More informationAccess Energy Thermapower Organic Rankine Cycle (ORC) Systems
Access Energy Thermapower Organic Rankine Cycle (ORC) Systems The Preferred Heat-to-Power Solution for All Land-based Applications Capture. Convert. Consume. Compact, Efficient and Reliable Heat Recovery
More informationBoiler Basics. Design and operation
Boiler Basics Design and operation A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under
More informationEnergy Efficiency & Commercial Building Natural Gas Technologies. Presented by: Eric Burgis Energy Solutions Center
Energy Efficiency & Commercial Building Natural Gas Technologies Presented by: Eric Burgis Energy Solutions Center 610-796-1946 eburgis@escenter.org Commercial Buildings According to the U.S. Department
More informationINTEC Engineering GmbH Energy systems
INTEC Engineering GmbH Energy systems INTEC Engineering GmbH is an international company successfully operating in the design, delivery, installation and commissioning of energy systems. INTEC has established
More informationImplementation of Energy Saving measures in Existing Buildings
Building Surveyors Conference on Building a Green and Sustainable Future Implementation of Energy Saving measures in Existing Buildings 5 September 2009 Energy Efficient / Environmental Friendly Products
More informationwww.greenspower.com.sg 1company profile G reens Power have been at the forefront of Waste Heat Recovery Technology since Edward Green first patented the Fuel Economiser in 1845. The business developed
More informationREGENERATION GAS HEATING: How It Works and What You Should Know
REGENERATION GAS HEATING: How It Works and What You Should Know WRITERS INFO: Regeneration Gas Heating: How It Works and What You Should Know Jeff Ackel Sigma Thermal, Inc. CEO sigmathermal.com Q Zane
More informationRHC GAS FIRED HEATING COILS
CI/SfB 56.83 X RHC GS FIRED HETING COILS RHC GS FIRED REZNOR HETING COILS Introduction Reznor gas fired heating coils are designed for inclusion in air handling units to provide a high efficiency gas fired
More informationBosch Commercial and Industrial Heating High efficiency steam boilers (175kg/h to 55,000kg/h)
Bosch Commercial and Industrial Heating High efficiency steam boilers (175kg/h to 55,000kg/h) 2 Efficiency on a large scale Bosch Thermotechnology Ltd. Bosch is one of the world s leading manufacturers
More informationBiomass Energy Systems
Biomass Energy Systems Direct Fired Furnaces Dieffenbacher USA has developed direct fired biomass combustion systems for dryers, lumber dry kilns, steam boilers, and thermal oil heaters. The conservative
More informationProblem Cause Remedial action. Gauge glass There was excess chemical dosage The normal ph recommended was 9.5 to See photo 3 & 4.
CASE STUDIES OF STEAM SYSTEM AUDIT IN SOME PLANTS By K.K.Parthiban, Venus Energy Audit System Introduction This article outlines the outcome of auditing of steam system conducted in process Industries.
More informationDIRECT-CONTACT CONDENSING TECHNOLOGY WATER TUBE BOILERS
DIRECT-CONTACT CONDENSING TECHNOLOGY WATER TUBE BOILERS Existing indirect technology developed in the 1800 s Flame heats metal, which in turn heats water 65-75% efficiency on a seasonal basis due to thermal
More informationMath. The latent heat of fusion for water is 144 BTU s Per Lb. The latent heat of vaporization for water is 970 Btu s per Lb.
HVAC Math The latent heat of fusion for water is 144 BTU s Per Lb. The latent heat of vaporization for water is 970 Btu s per Lb. Math F. to C. Conversion = (f-32)*(5/9) C. to F. Conversion = C * 9/5 +
More informationProducts Solutions Services. Energy Solutions. Food & Beverage industry. Slide 2
Products Solutions Services Food & Beverage industry Slide 2 Why is energy management an important topic? Energy prices influence production costs, End-consumer looks for sustainable products, companies
More informationB - BEST O - ORIGINAL. R - Renown. N - Name. I n H e a t e r s
B - BEST O - ORIGINAL R - Renown N - Name I n H e a t e r s Comprehensive, Cost-Effective and Super-Efficient The Born Range of Products and Services Specialist Furnaces Hydrocracking Steam Reforming Sulfur
More informationEfficient Steam System Design
Efficient Steam System Design The word Efficient is often used to describe the general performance of a system. However it is important to distinguish between efficiency and effectiveness. Efficiency is
More informationBeneficial Use of Landfill Gas for Leachate Evaporation and Power Generation
Beneficial Use of Landfill Gas for Leachate Evaporation and Power Generation Efficient use of Energy Turning waste to energy, liabilities to assets and visions into reality. Table of Contents BENEFICIAL
More informationImage_engl_08:Image-engl-RZ :55 Uhr Seite 1. INTEC Engineering GmbH Energy systems
Image_engl_08:Image-engl-RZ 09.09.2008 11:55 Uhr Seite 1 INTEC Engineering GmbH Energy systems Image_engl_08:Image-engl-RZ 09.09.2008 11:55 Uhr Seite 2 INTEC Engineering GmbH is an international company
More informationR4 Ventures LLC White Paper
R4 Ventures LLC White Paper Preliminary Temperature Performance Evaluation of New Cooling Technologies consisting of the Multistage Evaporative Cooling System (MECS) for Phoenix, AZ; Newark, DE; Houston,
More informationAdsorption Chillers Energysmart Green Cooling
Adsorption Chillers Energysmart Green Cooling New Partners in innovation Leaders in Dehumidification... Worldwide Power Partner Inc USA www.bryair.com Recover Low Grade Process Waste Heat For Energy Smart
More informationAppendix 13. Categories of Cooling and Heating systems
EcoShopping - Energy efficient & Cost competitive retrofitting solutions for Shopping buildings Co-funded by the European Commission within the 7 th Framework Programme. Grant Agreement no: 609180. 2013-09-01
More informationEfficiency & Savings through On-Line Chemical Cleaning
Efficiency & Savings through On-Line Chemical Cleaning SENTRO Technologies provides innovative cleaning services to the Refining, Petrochemical & Pipeline industries www.sentro-technologies.com USA UK
More informationGas condensing boiler (wall mounted) TopGas
Gas condensing boiler (wall mounted) TopGas Modern gas condensing technology generates up to 15 % more heat from the consumed energy source. TopGas. Advanced technology attractive and compact. TopGas.
More informationRonald Sigmond 26 Oct 2016 FLAME MONITORING, GAS HANDLING SYSTEMS AND BURNERS
Ronald Sigmond 26 Oct 2016 FLAME MONITORING, GAS HANDLING SYSTEMS AND BURNERS Honeywell Thermal Solutions Family of Offerings: 1 Product Brands: Becomes Becomes Becomes Hauck Exothermics Combustion Safety*
More informationNew PHE applications in construction & HVAC.
New PHE applications in construction & HVAC Static head isolation Static Head isolation A temperature gradient present in different levels Different sizing of AHU / FCU required Reduces pressure head in
More informationArmstrong Cool-Fog Systems
Armstrong Cool-Fog Systems Armstrong International, Inc. is a leading supplier of hydropneumatic fogging systems used for both humidification and evaporative cooling. Its systems were first developed in
More informationHot Water Generation for Commercial and Industrial Applications. Paul Marsden Specification Sales Manager
Hot Water Generation for Commercial and Industrial Applications Paul Marsden Specification Sales Manager Baxi and BDR Thermea Baxi is part of the BDR Thermea Group, a global manufacturer and distributor
More informationTop performance when the going gets tough
Top performance when the going gets tough The Alfa Laval DuroShell plate-and-shell heat exchanger Sub-headline coming soon DuroShell plate-and-shell made tougher Alfa Laval DuroShell is a specially engineered
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) LIGHTING; HEATING F28 HEAT EXCHANGE IN GENERAL (NOTES omitted) F28D HEAT-EXCHANGE APPARATUS,
More informationYour Equipment Manufacturer for Material Processing. Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION
THERMAL REMEDIATION SOIL REMEDIATION DRILLING MUDS DRILL CUTTINGS Pyrolysis recovery SYSTEMs Leading The Industry In Thermal Desorption Technology Vulcan 70 Indirect Thermal Desorption Unit with Vapor
More informationHeating with Wood. Part 2
Heating with Wood Part 2 Advanced Combustion Woodburning FIREPLACE Advanced Combustion Woodburning Fireplace Fireplace & Woodstove Emissions 50 45 40 35 30 25 20 15 10 5 0 Conventional Fireplace Dirty
More informationMadhu Honap HONEYWELL THERMAL SOLUTIONS INTRODUCTION
Madhu Honap HONEYWELL THERMAL SOLUTIONS INTRODUCTION Honeywell, great positions in good industries Honeywell Thermal Solutions HTS EMEA 5 Honeywell Thermal Solutions Thermal Solutions Word leading brands
More informationFlo-Rite-Temp Instantaneous Steam/Water Heater
Steam/Water Heaters Steam/water heaters are typically classified as instantaneous, semi-instantaneous and tank-type. Temperature control can be defined as either feed-forward or feedback. Feedback systems
More informationSpray Rinse & Steam Handling
Spray Rinse & Steam Handling Spray Rinse Valve 27 SR The Fetterolf Spray rinse valve Type 27 SR was developed to wash residue from large tank or reactor walls without having to open or enter a vessel.
More informationCast Line Heaters The Benefits of This Space Saving Electric Heater
WHITE PAPER Cast Line Heaters The Benefits of This Space Saving Electric Heater Introduction Cast line heaters, or cast-in heaters, offer an alternative to the more common inline process heaters that have
More informationA Technical Introduction to Cool Thermal Energy Storage Commercial Applications
A Technical Introduction to Cool Thermal Energy Storage Commercial Applications Cool Thermal Energy Storage is a new application of an old idea that can cut air conditioning energy costs in half while
More information... RHeco. High Efficiency Condensing Unit Heaters... Low NO x. ErP. ErP Lot 21 Seasonal Efficiency and NOx compliant
... RHeco... ErP 2021 ErP Lot 21 Seasonal Efficiency and NOx compliant RHeco...... Reznor continue their tradition of manufacturing high efficiency warm air heating equipment with the introduction of the
More information... RHeco. High Efficiency Condensing Unit Heaters... Low NO x. ErP. ErP Lot 21 Seasonal Efficiency and NOx compliant
... RHeco... ErP 2021 ErP Lot 21 Seasonal Efficiency and NOx compliant RHeco...... Reznor continue their tradition of manufacturing high efficiency warm air heating equipment with the introduction of the
More informationEKO Line Pellet Boiler Wood Pellet Storage Solutions And Pellet Dosage Systems
EKO Line Pellet Boiler Wood Pellet Storage Solutions And Pellet Dosage Systems 1 EkoLine Wood Pellet Boilers EKOLINE boilers have been designed specifically for the purpose of heating water to temperatures
More informationBOOK 1 OVERVIEW RD2XRT INSTALLATION AND OPERATION MANUAL. Table of Contents ABOUT BOOK 1:
4510 Helgesen Drive, Madison, WI, 53718 608.221.4499, 800.627.4499, Fax: 608.221.2824 support@renewaire.com www.renewaire.com RD2XRT INSTALLATION AND OPERATION MANUAL BOOK 1 OVERVIEW ABOUT BOOK 1: This
More informationWASTE HEAT RECOVERY BY ROTAMILL INTELLIGENT ENERGY RECOVERY AND USE OF PROCESS HEAT
WASTE HEAT RECOVERY BY ROTAMILL INTELLIGENT ENERGY RECOVERY AND USE OF PROCESS HEAT TABLE OF CONTENTS Page WASTE HEAT RECOVERY AT HIGH TEMPERATURES 4-5 Recuperators 6 Waste heat boilers 7 COST-EFFECTIVE
More informationIN THE PULP AND PAPER INDUSTRY
H E A T E X C H A N G E R S BULLETIN NO. TIS-105A PRIME SURFACE PLATE & FRAME ALL-WELDED PLATE IN THE PULP AND PAPER INDUSTRY THE heat transfer people H E A T E X C H A N G E R S 2 TRANTER BRINGS EFFICIENCY
More informationFlo-Rite-Temp Instantaneous Steam/Water Heater
Steam/Water Heaters Steam/water heaters are typically classified as instantaneous, semi-instantaneous and tank-type. Temperature control can be defined as either feed-forward or feedback. Feedback systems
More informationMechanical Engineering Department Sheet (1)
Benha University Heat and Mass Transfer Faculty of Engineering at Shoubra 3 rd Year (Power) Mechanical Engineering Department Sheet (1) (1) What is heat exchanger? Mention with brief description and sketches
More informationAdvanced heat transfer technology
Advanced heat transfer technology Providing substantial energy savings through customized designs Thermo plate products for the process industry Thermo plate products for the process industry Unique transfer
More informationThe world s standard in efficiency. CBEX FIRETUBE
The world s standard in efficiency. CBEX FIRETUBE CBEX Firetube Boilers For decades, engineers have been trying to build a better and more efficient boiler system, but it took Cleaver-Brooks to challenge
More information25 Years IBS GmbH. Innovative and taylormade burner systems
25 Years IBS GmbH Innovative and taylormade burner systems Modern burner technology for industry and environment. Since the foundation of the company in the year 1969 IBS focused on engineering and production
More informationBORSIG WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS PROCESS HEAT EXCHANGER. A Member of KNM Group Berhad
BORSIG PROCESS HEAT EXCHANGER WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS A Member of KNM Group Berhad The Company BORSIG Process Heat Exchanger GmbH (a member of the BORSIG
More informationA MEMBER OF MUHIBBAH ENGINEERING
CiBAS The CiBAS is an innovative and unique WHRU designed by CiTECH, specifically aimed at saving weight and space. With over 70 units in operation, it is an ideal environmentally friendly solution for
More informationIncreasing Energy Efficiency in the Web Coating Process
Increasing Energy Efficiency in the Web Coating Process By Ed Cohen Edward Coating Consulting & Dan Bemi MEGTEC Systems, Inc. Fossil Fuel Dependency 2 How to Keep Your Competitive Edge Know what energy
More informationTrends for Radiant Tube Heated Strip Lines
WS Thermal Process Technology Inc., Elyria, Ohio WS Thermal Process Technology Inc., Elyria, Ohio Abstract WS Thermal Process Technology Inc., Elyria, Ohio Introduction After a extended period of low and
More information2. CURRICULUM. Sl. No.
. CURRICULUM Sl. No. Code Title No. of Lecture Hours 1 RAC 001 Fundamentals of Refrigeration and Air 60 conditioning RAC 00 Psychrometry, Heat load Estimation for 70 Air conditioning and Refrigeration
More informationProcess Heat Equipment & Combustion Field Services Guide
Stelter & Brinck Since 1956 Process Heat Equipment & Combustion Field Services Guide www.stelterbrinck.com 513-367-9300 S&B s Steps to a Successful Project. Our number one goal is to deliver the best value,
More informationOil and gas solutions. Unicon boiler plants for steam and hot water production
Oil and gas solutions Unicon boiler plants for steam and hot water production Contents Pages 6-9 Unicon WF Boiler plants equipped with fire tube boilers that use oil or natural gas. Pages 10-13 Unicon
More informationA MEMBER OF MUHIBBAH ENGINEERING
CiBAS The CiBAS is an innovative and unique WHRU designed by CiTECH, specifically aimed at saving weight and space. With over 70 units in operation, it is an ideal environmentally friendly solution for
More informationHeat Pump Technology. Air Source, Water Source and Ground Source. Optimised heat pumps for residential and commercial applications
Heat Pump Technology Air Source, Water Source and Ground Source Optimised heat pumps for residential and commercial applications ICS Cool Energy Limited has nearly 25 years experience in supplying and
More informationETA ACCU 90% HIGHEST EFFICIENCY AIR HANDLING UNIT
90% EFFICIENCY HIGHEST EFFICIENCY AIR HANDLING UNIT Packaged energy recovery solutions for Green Buildings Integrated Accumulator, controls and DX Cooling System CLEAN AIR SINCE 1963 Euroclima is a company
More informationecodry Figure 1 - Process Diagram ecodry B General Process Description
ecodry The process principal of the ecodry system is centered around the concept of drying in a closed steam loop, with a process-integrated thermal oxidation. The separation of flue gas from the drying
More informationCOLD STORAGE WAREHOUSE, USING DIRECT EXPANSION AMMONIA REFRIGERANT Ray Clarke ISECO Consulting Services Pty Ltd
COLD STORAGE WAREHOUSE, USING DIRECT EXPANSION AMMONIA REFRIGERANT Ray Clarke ISECO Consulting Services Pty Ltd Abstract This paper presents the design approach adopted for the expansion of a large existing
More informationMECHANICAL DESIGN. Full service Mechanical Design Professionals that can provide the full package!
MECHANICAL DESIGN Full service Mechanical Design Professionals that can provide the full package! We specialize in commercial and industrial mechanical system designs that are integral to the building
More information05/14/2012 BOILER TUNE UPS & REPLACEMENTS PRESENTATION BOILER BASICS FOR LARGE INDUSTRIAL FACILITIES. Mark Bergum, P.E.
BOILER TUNE UPS & REPLACEMENTS FOR LARGE INDUSTRIAL FACILITIES Mark Bergum, P.E. PRESENTATION BOILER BASICS 1 BASE ASSUMPTION BOILER Steam Heat Output Exhaust Heat Losses 70% 20% Other Heat Losses 3% Blowdown
More informationAdca Training. Part 2
Adca Training Part 2 This presentation is only a guideline, that can only be completed by a trained personnel. (This document s total or partial use and/or reproduction is only allowed if the reference
More informationBoiler. Fire tube Boiler:
Boiler What is Boiler? A closed metallic vessel in which the water is heated beyond the boiling temperature by the application of heat by the combustion of fuels to convert it into steam. The function
More informationBOOK 1 OVERVIEW RD2XIN INSTALLATION AND OPERATION MANUAL. Table of Contents ABOUT BOOK 1:
4510 Helgesen Drive, Madison, WI, 53718 608.221.4499, 800.627.4499, Fax: 608.221.2824 support@renewaire.com www.renewaire.com RD2XIN INSTALLATION AND OPERATION MANUAL BOOK 1 OVERVIEW ABOUT BOOK 1: This
More informationIndiana WX Oil Furnace Inspection Guide
Indiana WX Oil Furnace Inspection Guide Client: Job # : Address: Phone: Client Interview: Oil Dealer: Date of last service: Comments/Billing information: Standard Inspection / Clean and Tune Follow-up:
More informationTOTAL SYSTEM EFFICIENCY: SYSTEM APPLICATIONS & DESIGNS. David Grassl PE Mechanical Engineer Principal
TOTAL SYSTEM EFFICIENCY: SYSTEM APPLICATIONS & DESIGNS David Grassl PE Mechanical Engineer Principal Similar to traditional boiler systems, condensing boiler systems have many designs they can operate
More informationPackaged Marine Design Thermal Fluid (Hot Oil) Heaters
PACKAGED MARINE THERMAL FLUID (HOT OIL) HEATERS Packaged Marine Design Thermal Fluid (Hot Oil) Heaters For Heating Asphalt Barges, Tankers, And Any Other Application Requiring Dependable Heating 13 Models
More informationWe are engaged in manufacturing, exporting, trading and supplying of Cooling Equipment such as Air Cooled Chillers, Water Cooled Chillers,
+91-8048718646 Snowcool Systems India Private Limited http://www.chillers-coolers.com/ We are engaged in manufacturing, exporting, trading and supplying of Cooling Equipment such as Air Cooled, Water Cooled,
More informationJet Vacuum Systems. GEA Wiegand GmbH
Jet Vacuum Systems GEA Wiegand GmbH The basics of jet vacuum pumps Jet vacuum pumps are used to create and maintain the vacuum in evaporators, driers, in distillation and rectification plants, and in the
More informationStudy and Design Considerations of HRSG Evaporators in Fast Start Combined Cycle Plants. Govind Rengarajan, P.E.CEM, Dan Taylor
Study and Design Considerations of HRSG Evaporators in Fast Start Combined Cycle Plants Govind Rengarajan, P.E.CEM, Dan Taylor CMI Energy, Erie PA 1651 Bernd Pankow P.E, Pankow Engineering Abstract Combined
More informationORTEC HIGH CAPACITY REFRIGERATED AIR/GAS DRYERS
ORTEC Compressed Air, Gas & Fluid Technologies HIGH CAPACITY REFRIGERATED AIR/GAS DRYERS Energy Lean Planet Green Cycling and Non-Cycling Design Energy Efficient s Fluctuating and Intermittent Loads Capacity,0
More informationAppendix A. Glossary of Common Terms
Glossary of Common Terms Glossary of Common Terms Absorption chiller A refrigeration machine using heat as the power input to generate chilled water. Adjustable speed drive A means of changing the speed
More informationAIR-CONDITIONING SYSTEMS AND APPLICATIONS. Abdullah Nuhait Ph D. King Saud University
AIR-CONDITIONING SYSTEMS AND APPLICATIONS Abdullah Nuhait Ph D. King Saud University AIR-CONDITIONING SYSTEMS Earliest air conditioning system used only for heating (winter) Provided heated air for comfort
More informationHEAT RECOVERY & POWERED VENTS
HEAT RECOVERY & POWERED VENTS HEAT RECOVERY VENTING TOPICS HEAT RECOVERY DEFINITION HOW HEAT IS LOST WHILE DRYING HOW IS THE KILN BEING VENTED WHERE IS ENERGY CONSUMED WAYS TO PREVENT ENERGY LOSS POWER
More informationTighe&Bond. Groton Heights School Mechanical Evaluation. 1 Existing Conditions. 1.1 Water Service Entrance
Groton Heights School Mechanical Evaluation TO: FROM: Amy Vaillancourt, Project Manager Harley Langford, Project Manger Jason Curtis, P.E. DATE: February 24, 2016; Revised May 31, 2016 On Monday, December
More informationFeasibility of a Liquid Desiccant Application in an Evaporative. Cooling Assisted 100% Outdoor Air System
Feasibility of a Liquid Desiccant Application in an Evaporative Cooling Assisted 100% Outdoor Air System M.H.Kim 1, S.K.Han 1, S.Y. Cho 2, and J.W.Jeong 1* 1 Department of Architectural Engineering, Hanyang
More informationCI/SfB X. RHeco Series CONDENSING GAS FIRED UNIT HEATERS
CI/SfB 56.83 X RHeco Series CONDENSING GAS FIRED UNIT HEATERS RHeco Series CONDENSING GAS FIRED UNIT HEATERS Introduction Features & Benefits Model Range Reznor continue their tradition of manufacturing
More informationINDUSTRIAL WATERTUBE BOILERS
INDUSTRIAL WATERTUBE BOILERS Innovative solutions for maximum efficiency Cleaver-Brooks Engineered Boiler Systems Manufacturers of Nebraska Boilers, NATCOM Burners and ERI HRSG Systems Industrial Watertube
More informationFuel-Fired Vertical Tubeless Boilers. Classic, Edge, Tribute and VMP Models From 4 to 150 BHP (138-5,021 lbs/hr)
Fuel-Fired Vertical Tubeless Boilers Classic, Edge, Tribute and VMP Models From 4 to 150 BHP (138-5,021 lbs/hr) Fulton: An industry leader since 1949. OUR HISTORY Fulton Boiler Works, Inc. was founded
More informationA Cover. steam & hot water ENERGY EFFICIENT
A Cover steam & hot water ENERGY EFFICIENT EQUIPMENT toolkit 1 CONTENTS & Summary 2 Introduction 3 equipment & processes 3 Optimise and maintain boiler operation 4 upgrade equipment 4 Rearrange boiler
More informationINSTALLATION, OPERATION AND MAINTENANCE. Ariterm Hybrid 20
INSTALLATION, OPERATION AND MAINTENANCE Ariterm Hybrid 20 TABLE OF CONTENTS General...3 Installation... 4-5 Dimensions - with flue gas exhauster...6 Dimensions - without flue gas exhauster...7 Pipe installations...8
More informationHEADLINE LOREM IPSUM COMPANY EFFICIENCY
HEADLINE LOREM IPSUM COMPANY EFFICIENCY MEFKON PRODUCT RANGE Ladle preheater/drier Tundish preheater/drier Scrap drier Snorkel preheater Redundant control of burner Modern burner technology Reduction of
More informationMax-3 Steel Shell Boiler
Max-3 Steel Shell Boiler Responsibility for energy and environment Output range 500 to 3000 kw 1 Why choose Max-3? The Hoval Max-3 boiler delivers market-leading efficiency and cost effective heating performance.
More information