P4490 Kill A Watt Edge Operation Manual

Size: px

Start display at page:

Download "P4490 Kill A Watt Edge Operation Manual"

Ilene Doris Dennis
6 years ago
Views:

P4490 Kill A att Edge Operation Manual Feature Locations : ON / OFF Key Tank you for purcasing te P4490 Kill A att Edge.

Take te tie to copletely review tese instructions as well as safety warnings to ensure your best use of te product.

standby ode. Te unit cobines uan otion detection by PIR (Passive Infrared) sensor detection, and sensing te appliance s standby power level, to control te flow of AC power autoatically.

1 P4490 Kill A att Edge Operation Manual Feature Locations : ON / OFF Key Tank you for purcasing te P4490 Kill A att Edge. Tis operating anual will provide an overview of te product, safety instructions, a quick guide to operation, and coplete instructions for correct usage. Take te tie to copletely review tese instructions as well as safety warnings to ensure your best use of te product. You can use te Kill A att Edge unit to ceck your appliances electric consuption, cost to run, equivalent eissions, and as a standby killer to sut down your appliances wen tey are not used, and are in standby ode. Te unit cobines uan otion detection by PIR (Passive Infrared) sensor detection, and sensing te appliance s standby power level, to control te flow of AC power autoatically. AC power will be provided autoatically wen users are present and standby power will be cut off autoatically wen tey leave te roo to save energy, save eissions to elp protect te eart. A power killer function is available so tat te unit operates as a conventional otionactivated switc. Te power killer ode will sut off power to appliances regardless of standby power after a settable delay. Te power killer function is ideal for space eaters, uidifiers, etc. Te Kill A att Edge is also easy to read tanks to a teter feature tat allows you to perc your eter nearby te ite you are easuring witout aving to bend over or unplug te device to view data. Keep te ousing ated togeter in a single unit for copact use or separate te two odules to allow for easy reading or precise placeent of te PIR otion sensor. PIR PIR and Display Unit 4.5foot tetered Cord Socket Outlet Unit Front iew Advanced features also included : Monitoring oltage, Aperage, att, KH, sed, Costs and eissions. Displaying Aperage, att, KH, sed, Costs and eissions savings. Over current protection to provide safe power to your expensive equipent. Zero power crossing switces provide a spike free ON/OFF relay control to prolong your appliances life. Now you ll know ow uc power your appliances are using, and begin saving power wit te Kill A att Edge. it te innovative Kill A att Edge you ll ave peace of ind in ore ways tan one. ON / OFF Key Cord cover PIR and Display Unit 4.5foot tetered Cord Safety Instructions : Te operating voltage is liited to / 10% of Line voltage 110ac. Do not use it in oter voltage rating. Te axiu output current is 15A. To reduce te risk of electric sock, do not reove cover. No userserviceable parts inside. Refer servicing to qualified service personnel. arning : To reduce te risk of fire or electric sock, do not expose tis appliance to rain or oisture. Plug Outlet Unit Rear iew Page 1 Page 2

Display Panel : Cost ode icon And unit () ode icon Save ode icon sed tie icon Setting adjustent Increase button indicator Installation: Killer icon: : enabled Flas: power off ON/OFF key wit LED

2 Display Panel : Cost ode icon And unit () ode icon Save ode icon sed tie icon Setting adjustent Increase button indicator Installation: Killer icon: : enabled Flas: power off ON/OFF key wit LED indicator button Cost button button, Mont and icon Unit for ode ( & ) Unit for atts ode () unit icon. PIR Motion icon: Steady: No otion Flas: Motion detected Setting adjustent decrease button indicator 1. Before connection to te unit, turn off te appliance and reove te power cord fro te outlet. 2. Plug te appliance s power cord into te Kill A att Edge unit socket, and ten connect te Kill A att Edge into te outlet. 3. If tere are any appliances, please use a power strip, plug all te appliance s power cords into power strip s sockets and plug te power strip into Kill A att Edge socket, and ten connect te Kill A att Edge into te outlet. 4. Turn on te appliance witin 10 seconds. Tis tie liit is iportant to ensure correct standby power detection. 5. Now te Kill A att Edge will easure appliance standby power, te ON/OFF key on te top of te Kill A att Edge will flas in green once per second, wic indicates te standby power is being easured. After 30 to 40 seconds, te standby power easuring is finised. Te ON/OFF key s ligt will be solid green. Now, te unit is working and in PIR otion detection ode. ON, OFF and PIR detect function : 1. ing te ON/OFF key will turn off power to te outlet at once. Te key will illuinate in red. Te unit will continue to easure power (e.g. oltage, ) and te function keys and LCD display will continue to operate. 2. ing te ON/OFF key again will turn power on to outlet at once. Te key will illuinate in green. Te unit features a spikefree switc function wic activates at zerocrossing and will present clean power to your connected appliance. Te unit will easure power and te function keys and LCD display will operate. Te unit will be in PIR otion detection ode. 3. If tere is no otion in te PIR effective area, and te appliance is in standby ode, te unit will cut off power according to off power delay tie setting. For exaple, wit a 30 inute setting, after 30 inutes, te unit will sut down power, te LED will flas green every 3 seconds, and te unit will be in PIR otion detection ode. en soebody oves into te effective PIR area, te unit will turn power on to outlet at once. Te LED will illuinate in green. 3.1 Tere are 3 conditions tat ust be true to cut off power: A, No otion in te PIR effective area, B, Te appliance is in standby condition, and te unit standby off power level is larger tan appliance instant standby power, C, Te off power delayed tie setting value ust ave elapsed. 3.2 Please refer to power,off power delayed tie and PIR sensor detecting distance settings for detailed inforation. 4. Te sorter te off power delayed tie setting, te ore energy will be saved but te AC power on/off cycles will occur ore frequently. Te appropriate setting for off power delayed tie will be to balance appliance use and save energy. 1 our for office, 30 inutes for oe, is a suggested starting point. 5. Suary: 4.1 green ligt = power on, and PIR otion detect function on. 4.2 red ligt = power off, and PIR otion detect function off. 4.3 green ligt every 3 second = power off, and PIR otion detect function on. 4.4 green ligt every second = standby power is easuring, don t touc. Reark : Flasing segents on te LCD display indicate tat tis ite can be reset. Page 3 Page 4

3 Cost ode : pressing te center Cost () key. Te Cost ode display can include,,, Mont, and. Repeated presses will cange displays. LCD display default will sow cost () and (atts). indicates tere will be no display in te Power Kill ode. Key ode : pressing te left key. Te ode display can include,,, Mont,,, and /. Repeated presses will cange displays. indicates tere will be no display in te Power Kill ode. Key Power ON reset Mont Mont Mont Mont Cange Screen Cange Screen Cange Screen Cange Screen Mont Mont Mont Mont Cange Screen Cange Screen Cange Screen Cange Screen Mont Mont Mont Mont Cange Screen Cange Screen Cange Screen Cange Screen Mont Mont Mont Mont Cange Screen Cange Screen Cange Screen Cange Screen Page 5 Page 6

4 ode : Te ode display includes,, A,, sed and. Repeated presses will cange displays. setting : and Hold 3 Second Key Mont Mont Mont Mont Cost Cost Cange Screen Mont Cange Screen Cange Screen Mont Cange Screen Cange Screen Reset (Clear) : Flas Screen Mont Cange Screen Mont Cange Screen Mont Cange Screen Mont Cange Screen Mont Cange Screen and Hold 3 Second, Mont Flas Screen Mont Mont Yes No Yes Flas Screen Mont No Cange Screen Cange Screen Page 7 Page 8

5 and / setting : and Hold 3 Second Mont Flas Screen Mont Mont Flas Screen in PIR otion detection ode. : Te ON/OFF key will flas green every 3 seconds; te unit will turn off power to outlet, and also activate te PIR otion detection function. en soebody oves into te effective PIR area, te unit will turn power on to outletat once. Te key will illuinate in green. PIR sensor : Te otion detection effective area is a 3D zone as per te following description, wen it is not blocked by acines or furniture. Please install te PIR and display unit at te appropriate place wic can cover torougly te appliances use area. Distances: 15 feet (ax.), orizontal angle: 40 degree (ax.), vertical angle: 70 degree (ax.). PIR Function Enabled Function Enable (Green LED Flases every 3 seconds) Mont Cange Screen en Motion Detected Power ON Flas Screen Mont Mont (PIR icon Flases) Cange Screen Cange Screen Page 9 Page 10

6 kill ode and power kill ode setting : Kill ode select and setting. Coose te ode wic best suits your present requireents. kill ode will cut off power wen te appliance is in standby ode (turned off ) and no otion is detected for te prograed off power delay tie. Use tis ode for appliances suc as televisions wic typically consue power even wen switced off. Tis use will save energy by ensuring zero power is consued by te appliance wen it is not in use. Te otion sensor will ensure te appliance will respond to te user and reote controls wen you need it. Tis ode will not cut power to an appliance tat is turned on regardless of detected otion. Power kill ode will cut off power to te appliance regardless if it is turned ON or OFF after no otion is detected for te prograed off power delay tie. Use tis ode for appliances tat you want to operate only wen otion is detected and te user is present suc as space eaters and uidifiers. Tis use will save energy by ensuring te connected appliance will only operate wen te user is present. Use te off power delay tie setting to adjust for periods were you want te appliance to continue to operate despite te lack of otion. For exaple, sleeping periods. Hold Key 3 sec kill ode : power, Off power delayed tie and PIR sensor detecting distances setting : power : Off, 0.1 to Off power delayed tie : 10 seconds to 2 ours, default is 10 inutes. PIR sensor detecting distances : Off (disable PIR function), 1 foot to 15 feet, default is 15 feet. Kill Mode Setting Mont Flas Screen 1, Upper LCD d isplays te easured stand by off pow er level plus a sall buffer. It is autoatically easured wen te user first insta lls te unit, norally it will be sli gtly ig er ta n te instant standby power of te ap pliance. In t is exaple te easured value is 10.6 so te setting is Key 2, It is adjustable. If te user adjusts tis standbyoff power level 0.1 down to lower tan appliance s instant standby power (< 10.6 Range for exa ple), te uni t will be always on, and te LED wil l stay OFF, 0.1 ~ 1980 att green , Off = disable standby power coparative function, te unit is Key always on and ON/OFF LED always green. Te low er LCD displ ays te appliance s instan t standb y power in tis exaple. Mont Flas Screen To Kill Mode Setting Key Key Select Kill Mode or Power Kill Mode Mont Flas Screen To Power Kill Mode Setting Mont Flas Screen Mont Flas Screen Mont Key Select Range 10,20,30,40,50 sec; 01 ~ 59 in; 01, 02 our Key Key Select Range Sensitivity OFF, 115 Ft Key Default is 15 feet. Less tie delay More tie delay Less range More range OFF = Disable PIR function: te unit will cut power ac cording to S tandby off power level and off power delayed tie conditions only. After off power delayed tie setting value, te unit will cut power wen te appliance is in standby condition, Te LED flases green every 3 seconds, and te unit will not activate te PIR otion sensor function and will not turn on power again even wen soebody oves into te PIR effective area. It is T recoended to disable te PIR function. 1. Off power delay tie. Default is 10 inutes. 2. Te sorter te off power delayed tie, ore energy will be sa ved, but te AC powe r on /off cyc les will occur ore frequently. Te app ropriate setting for off power delayed tie will be to bal ance a pplian ce use and save energy. 1 our for office, 30 inutes for oe, is a suggested starting point. Mont Flas Screen Mont Cange Screen Cange Screen Page 11 Page 12

7 Power kill ode : Off power delayed tie and PIR sensor detecting distances setting : Off power delayed tie : 10 seconds to 12 ours, default is 4 ours. PIR sensor detecting distances : Off (disable PIR function), 1 foot to 15 feet, default is 15 feet. Power Kill Mode Setting Mont Flas Screen Cange Screen Flas Screen Mont Mont Key Select Range 1O sec ~ 12 our Key Key Select Range Sensitivity OFF, 115 Ft Key Default is 15 feet. Less tie delay More tie delay Less range More range OFF = Disable PIR function: te unit will cut power according to te off power delayed tie conditions only. After off power delayed tie setting value, te unit will cut power. Te LED flases green every 3 seconds, and te unit will not activate te PIR otion sensor function and will not turn on power again even wen soebody oves into te PIR effective area. It is T recoended to disable te PIR function. 1, Default is 4 our. 2, Te sorter te off power delayed tie, ore energy will be sa ved, but te AC powe r on / off cyc les will occur ore frequently. Te app ropriate setting for off power delayed tie will be to balance appliance use and save energy. Mont Flas Screen Mont Cange Screen Alar ode : Over Current : en te current load presented by te connected appliance exceeds te ax. Current (15A), te unit will switc to Over Current ode. Te power will be switced off to te outlet. Te key will illuinate in red. LCD will display te OER icon and protected current value. Reove te appliance; press te key to erase te ain display, Over icon and protected current value. Ten press te key to turn te power back on. Current Load A First Over Current Mont Cange Screen Over Current after continuous 5 second Cange Screen Mont (Red LED Flas every 0.5 second) Retained easureents : 1. en power to te unit is interrupted, cuulative power consuption KH, sed, Cost, and will be retained autoatically into EEPROM. All user settings, s, power, Off power delay tie, PIR distances are retained in EEPROM after every user setting. Tis feature allows settings to be prograed one tie only witout loss during power interruptions or wen te unit is oved fro outlet to outlet. 2. en te AC power is restored or wen te unit is plugged into anoter outlet, cuulative power consuption KH, sed, Cost,,, power, Off power delay tie, and PIR distances will be retrieved autoatically fro eory. Mont Cange Screen Page 13 Page 14

8 Specifications : Maintenance Protect te eter fro adverse weater conditions. Te eter is not waterproof. Do not expose te LCD display to direct sunligt for long periods of tie. CAUTION : To avoid daage to te eter, do not expose it to sprays, liquids, or solvents. Clean te exterior of te eter by reoving dust wit a lintfree clot. Use care to avoid scratcing te clear plastic display filter. For furter cleaning, use a soft clot or paper towel dapened wit water. You can use a 75% isopropyl alcool solution for ore efficient cleaning. CAUTION : To avoid daage to te surface of te eter, do not use abrasive or ceical cleaning agents. P3 INTERNATIONAL CORPORATION LIMITED ARRANTY P3 INTERNATIONAL CORPORATION ("P3") warrants to te original retail purcaser only, tat its product is free fro defects in aterial or workansip under te condition of noral use and service for a period of six (6) onts fro te date of purcase. In te event tat a defect, alfunction or failure occurs or is discovered during te warranty period, P3 will repair or replace at its option te product or coponent part(s) wic sall appear in te reasonable judgent of P3 to be defective or not to factory specifications. A product requiring service is to be returned to P3 along wit te sales receipt or oter proof of purcase acceptable to P3 and a stateent describing te defect or alfunction. All transportation costs sall be borne by te owner and te risk of loss sall be upon te party initiating te transportation. All ites repaired or replaced tereunder sall be subjected to te sae liited warranty for a period of six (6) onts fro te day P3 sips te repaired or replaced product. Te warranty does not apply to any product tat as been subject to isuse, tapering, neglect, or accident or as a result of unautorized alterations or repairs to te product. Tis warranty is void if te serial nuber (if any) as been reoved, altered, or defaced. Tis warranty is in lieu of all warranties expressed or iplied, including te iplied warranties of ercantability and fitness for a particular purpose wic are expressly excluded or disclaied. P3 sall not be responsible for consequential, incidental or oter daages, and P3 expressly excludes and disclais liability for any daages resulting fro te use, operation, iproper application, alfunction or defeat of any P3 product covered by tis liited warranty. P3's obligation is strictly and exclusively liited to te replaceent or repair of any defective product or coponent part(s). Soe states do not allow te exclusion or liitation of incidental or consequential daages, so te above liitation or exclusion ay not apply to you. P3 does not assue or autorize anyone to assue for it any oter obligation watsoever. Soe states do not allow liitation on ow long an iplied warranty lasts, so te above liitations ay not apply to you. It is te owner/user's responsibility to coply wit local, state, or federal regulations, if any, tat ay pertain to P3 products or teir use. Tis warranty gives you specific legal rigts, and you ay also ave oter rigts wic vary fro state to state. If you experience difficulty in te operation of your unit, or if your unit requires repair please contact : Page 15 Page 16

Mold Alert... Operation Manual P0270

Mold Alert... Operation Manual P0270 introduction Congratulations on your purchase of the P0270 Mold Alert! Mold is as old as the Earth and it s everywhere. Under the right set of conditions, it can actually