MF-RHT Series - High Temperature PTC Resettable Fuses

Size: px

Start display at page:

Download "MF-RHT Series - High Temperature PTC Resettable Fuses"

Ethan Melton
6 years ago
Views:

*RoHS COMPLINT, **HLOGEN FREE & EC COMPLINT RH750 7180S Features n Compliant wit EC-Q200 Rev-C- Stress Test Qualification for Passive Components in utomotive pplications n Operating temperature range

1 *RoHS COMPLINT, **HLOGEN FREE & EC COMPLINT RH S Features n Compliant wit EC-Q200 Rev-C- Stress Test Qualification for Passive Components in utomotive pplications n Operating temperature range up to 125 C n Low termal derating factor n Higer old currents at elevated temperature n Coice of operating currents n RoHS compliant* and alogen free** n Resettable fault protection of general electronic equipment MF-RHT Series - Hig Temperature PTC Resettable Fuses Electrical Caracteristics Model V Volts I mps I old I trip Resistance mperes Oms mperes Max. Time To Trip Seconds Tripped Power Dissipation Watts R Hold Trip R 1Max. Min. Max. Typ. (Post Trip) MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT200/ MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT Environmental Caracteristics Operating Temperature C to +125 C Storage Temperature C to +85 C Passive ging C, 1000 ours... ±5 % typical resistance cange Humidity ging C, 85 % R.H ours... ±5 % typical resistance cange Termal Sock... MIL-STD-202, Metod 107,... ±10 % typical resistance cange +125 C to -40 C,10 cycles Vibration... MIL-STD-883C, Metod , Condition... No cange Moisture Sensitivity Level (MSL)... Level 1 ESD Classification - HM... Class 6 Test Procedures nd Requirements For Model MF-RHT Series Test Test Conditions ccept/reject Criteria Visual/Mec... Verify dimensions and materials... Per MF pysical description Resistance... In still 23 C... Rmin R R1max Time to Trip... t specified current, Vmax, 23 C... T time to trip (seconds) Hold Current min. at Iold... No trip Trip Cycle Life... Vmax, Imax, 100 cycles... No arcing or burning Trip Endurance... Vmax, 48 ours... No arcing or burning Solderability... MIL-STD-202, Metod % min. coverage * RoHS Directive 2015/863, Mar 31, 2015 and nnex. ** ourns considers a product to be alogen free if (a) te romine (r) content is 900 ppm or less; (b) te Clorine (Cl) content is 900 ppm or less; and (c) te total romine (r) and Clorine (Cl) content is 1500 ppm or less.

2 pplications n Protection of automotive circuitry including engine control modules n Overcurrent surge protection of electronic equipment required to operate at ig operating temperature ranges n Resettable fault protection of general electronic equipment MF-RHT Series - Hig Temperature PTC Resettable Fuses Termal Derating Cart - Iold (mps) Model mbient Operating Temperature -40 C -20 C 0 C 23 C 40 C 50 C 60 C 70 C 85 C 125 C MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT200/ MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT How to Order MF - RHT 200 / Typical Part Marking Represents total content. Layout may vary. Multifuse Product Designator Series RHT = Hig Temperature Radial Leaded Component Hold Current, Iold ( mps) Higer Voltage Option lank = Standard Voltage /32 = 32 Volts Packaging Options lank = ulk Packaging - 2 = Tape & Reel* - P = mmo-pak* Part Number Suffix Option - 14 = Kinked Leads in Place of Std. Straigt Leads - 17 = Straigt Leads in Place of Std. Kinked Leads PRT IDENTIFICTION RH S DTE CODE (FIRST DIGIT = LST DIGIT OF YER; NEXT THREE DIGITS = DY OF YER) EXMPLE: 7180 = 2017 DY 180 MNUFCTURER'S TRDEMRK COUNTRY OF MNUFCTURE (S = CHIN) *Packaged per EI 486-

3 MF-RHT Series - Hig Temperature PTC Resettable Fuses Product Dimensions Model MF-RHT050 MF-RHT070 MF-RHT100 MF-RHT200 MF-RHT200/32 MF-RHT300 MF-RHT400 MF-RHT450 MF-RHT500 MF-RHT550 MF-RHT600 MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 Packaging: ULK: C D E F Pysical Caracteristics Max. Max. Nom. Tol. ± Min. Max. Nom. Style Material (0.291) (0.500) (0.201) (0.028) (0.30) (0.12) (0.020) (0.27) (0.425) (0.201) (0.028) (0.30) (0.12) (0.020) 1 Sn/CuFe (0.382) (0.535) (0.201) (0.028) (0.30) (0.12) (0.020) (0.37) (0.55) (0.201) (0.028) (0.30) (0.12) (0.020) (0.37) (0.55) (0.201) (0.028) (0.30) (0.12) (0.020) (0.35) (0.55) (0.201) (0.028) (0.30) (0.12) (0.032) (0.394) (0.591) (0.201) (0.028) (0.30) (0.12) (0.032) (0.41) (0.61) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.744) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.744) (0.201) (0.028) (0.30) (0.12) (0.032) (0.441) (0.827) (0.201) (0.028) (0.30) (0.12) (0.032) (0.50) (0.88) (0.201) (0.028) (0.30) (0.12) (0.032) (0.55) (0.862) (0.201) (0.028) (0.30) (0.12) (0.032) (0.55) (0.93) (0.201) (0.028) (0.30) (0.12) (0.032) (0.65) (0.88) (0.201) (0.028) (0.30) (0.12) (0.032) (0.65) (1.012) (0.201) (0.028) (0.30) (0.12) (0.032) (0.689) (0.51) (0.402) (0.028) (0.30) (0.12) (0.032) (0.65) (0.88) (0.402) (0.028) (0.30) (0.12) (0.032) (0.925) (1.17) (0.402) (0.028) (0.30) (0.14) (0.040) MF-RHT050~MF-RHT800 = 500 pcs. per bag; MF-RHT900~MF-RHT1300 = 250 pcs. per bag TPE & REEL: MF-RHT050~MF-RHT400 = 3000 pcs. per reel; MF-RHT450~MF-RHT700 = 1500 pcs. per reel; MF-RHT750~MF-RHT1300 = 1000 pcs. per reel 0.51 (24WG) 0.81 (20WG) 1.0 (18WG) DIMENSIONS: MM (INCHES) MMO-PCK: MF-RHT050~MF-RHT400 = 2000 pcs. per pack; MF-RHT450~MF-RHT900 = 1000 pcs. per pack, MF-RHT1000~MF-RHT1300 = 500 pcs. per pack E E E lso available wit kinked and straigt leads in place of standard leads (see How to Order). D D D C F C F C F

4 MF-RHT Series - Hig Temperature PTC Resettable Fuses Typical Time to Trip at 23 C MF-RHT600 MF-RHT550 MF-RHT500 MF-RHT450 MF-RHT400 MF-RHT300 MF-RHT200, MF-RHT200/32 MF-RHT MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 MF-RHT MF-RHT050 Time to Trip (Seconds) Fault Current (mps) Te Time to Trip curves represent typical performance of a device in a simulated application environment. ctual performance in specific customer applications may differ from tese values due to te influence of oter variables. MF-RHT SERIES, REV. M, 11/17

5 MF-RHT Series Tape and Reel Specifications Devices taped using EI468 /IEC standards. See table below and Figures 1 and 2 for details. IEC EI Dimensions Dimension Description Mark Mark Dimensions Tolerance /+1.0 Carrier tape widt W W (.709) (-0.02/+.039) 11 Hold down tape widt W 0 W 4 min. (.433) Hold down tape No protrusion 3 Top distance between tape edges W 2 W 6 (.118) 9-0.5/+0.75 Sprocket ole position W 1 W 5 (.354) (-0.02/+0.03) 4 ±0.2 Sprocket ole diameter D 0 D 0 (.157) (±.0078) bscissa to plane (straigt lead) H H 18.5 ±3.0 (.728) (±.118) 16 ±0.5 bscissa to plane (kinked lead) H 0 H 0 (.63) (±.02) bscissa to top: MF-RHT050 ~ MF-RHT450 H 1 H (1.268) bscissa to top: MF-RHT500 ~ MF-RHT1300 H 1 H (1.837) 42.5 Overall widt w/lead protrusion: MF-RHT050 ~ MF-RHT450 C 1 (1.673) 55.0 Overall widt w/lead protrusion: MF-RHT500 ~ MF-RHT1300 C 1 (2.165) 42.5 Overall widt w/o lead protrusion: MF-RHT050 ~ MF-RHT450 C 2 (1.673) 54.0 Overall widt w/o lead protrusion: MF-RHT500 ~ MF-RHT1300 C 2 (2.126) 1.0 Lead protrusion I 1 L 1 (.039) Protrusion of cutout L L 11 (.433) Protrusion beyond old-down tape I 2 I 2 Not specified Sprocket ole pitc P 0 P ±0.3 (0.5) (±.012) Pitc tolerance 20 consecutive ±1 (±.039) Device pitc 25.4 ±0.6 (1.0) (±.024) Tape tickness t t 0.9 (.035) 1.5 Tape tickness wit splice: MF-RHT050 ~ MF-RHT200 t 1 (.059) 2.3 Tape tickness wit splice: MF-RHT300 ~ MF-RHT1300 t 1 (.091) Splice sprocket ole alignment 4.0 ±0.2 (.157) (±.008) ody lateral deviation Δ Δ 0 ±1 (±.039) ody tape plane deviation Δ p Δ p 0 ±0.3 (±.012) Ordinate to adjacent component lead P 1 P ±0.07 (.015) (±.028) DIMENSIONS: MM (INCHES)

6 MF-RHT Series Tape and Reel Specifications IEC EI Dimensions Dimension Description Mark Mark Dimensions Tolerance Lead spacing: MF-RHT050 ~ MF-RHT900 F F /+0.8 (0.2) (-0.006/+0.031) Lead spacing: MF-RHT1000 ~ MF-RHT1300 F F /+0.8 (0.402) (-0.006/+0.031) 56 Reel widt: MF-RHT050 ~ MF-RHT450 w W 2 (2.20) 63.5 Reel widt: MF-RHT500 ~ MF-RHT1300 w W 2 (2.50) Reel diameter d a (14.57) Space between flanges less device W ±3.25 (.187) (±.128) rbor ole diameter f c 26.0 ±12.0 (1.02) (±.472) Core diameter n 80.0 (3.15) ox (2.44) (14.0) (13.6) Consecutive missing places 3 Empty places per reel Not specified Taped Component Dimensions - Figure 1 p p Reference plane H 1 P 1 L F H H 1 W 0 H 0 W1 W I 2 I 1 P 0 D 0 User direction of feed Cross section - DIMENSIONS: MM (INCHES) Reel Dimensions - Figure 2 t Reel f d User direction of feed Upper side Tape Lower side w

7 Legal Disclaimer Notice Tis legal disclaimer applies to purcasers and users of ourns products manufactured by or on bealf of ourns, Inc. and its affiliates (collectively, ourns ). Unless oterwise expressly indicated in writing, ourns products and data seets relating tereto are subject to cange witout notice. Users sould ceck for and obtain te latest relevant information before placing orders and sould verify tat suc information is current and complete. Te caracteristics and parameters of a ourns product set fort in its data seet are based on laboratory conditions, and statements regarding te suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. Te caracteristics and parameters of a ourns product in a user application may vary from te data seet caracteristics and parameters due to a combination of te ourns product wit oter components in te user s application or due to te environment of te user application itself. Suc caracteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users sould always verify actual performance of te ourns product in teir specific devices and applications, and make teir own independent judgments about ow muc additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless ourns as explicitly designated an individual ourns product as meeting te requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), ourns is not responsible for any failure of an individual ourns product to meet requirements of suc industry standard or suc particular qualification. Users of ourns products are responsible for ensuring compliance wit safety-related requirements and standards applicable to teir applications. ourns products are not recommended, autorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any oter applications were failure or malfunction may result in personal injury, deat, or severe property or environmental damage. Unless expressly and specifically approved in writing by two autorized ourns representatives on a case-by-case basis, use of any ourns products in suc unautorized applications is at te user s sole risk. Life-critical applications include devices identified by te U.S. Food and Drug dministration as Class III devices and generally equivalent classifications outside of te United States. ourns standard products tat are designed and tested for use in automotive applications will be described on te applicable data seets as compliant wit te applicable EC-Q standard. Unless expressly and specifically approved in writing by two autorized ourns representatives on a case-by-case basis, use of any oter ourns standard products in an automotive application is not recommended, autorized or intended and will be at te user s sole risk. ourns standard products are not tested to comply wit United States Federal viation dministration standards generally or any oter generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. ourns standard products tat are designed and tested for use in aircraft or space applications will be described on te applicable data seets as compliant wit te RTC DO-160 standard. Unless expressly and specifically approved in writing by two autorized ourns representatives on a case-by-case basis, use of any oter ourns standard product in an aircraft or space application is not recommended, autorized or intended and will be at te user s sole risk. Te use and level of testing applicable to ourns custom products sall be negotiated on a case-by-case basis by ourns and te user for wic suc ourns custom products are specially designed. bsent a written agreement between ourns and te user regarding te use and level of suc testing, te provisions above applicable to ourns standard products sall also apply to suc ourns custom products. Users sall not sell, transfer, export or re-export any ourns products or tecnology for use in activities wic involve te design, development, production, use or stockpiling of nuclear, cemical or biological weapons or missiles, nor sall tey use ourns products or tecnology in any facility wic engages in activities relating to suc devices. Te foregoing restrictions apply to all uses and applications tat violate national or international proibitions, including embargos or international regulations. Furter, ourns products, tecnology or tecnical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes, and ourns products may not, witout prior autorization from ourns and/or te U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and tecnical data. To te maximum extent permitted by applicable law, ourns disclaims (i) any and all liability arising out of te application or use of any ourns standard product, (ii) any and all liability, including, witout limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and mercantability. For your convenience, copies of tis Legal Disclaimer Notice wit German, Spanis, Japanese, Traditional Cinese and Simplified Cinese bilingual versions are available at: Web Page: ttp:// PDF: ttp:// C /18/17

RUE Selection Guide and Product Data. RUE Selection Guide

RUE Selection Guide and Product Data. RUE Selection Guide Selection Guide and Product Data This section has two parts: A Selection Guide that walks you through the process of selecting the correct RUE device for a circuit. Product Data that outlines electrical