Sporlan Thermostatic Expansion Valves

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Splan Thermostatic Expansion Valves ulletin 10-10, July 2008

2 t THERMOSTTI EXPNSION VLVES ULLETIN Outstanding Features & enefits of Splan Thermostatic Expansion Valves 0 SELETIVE THERMOSTTI HRGES 0 Designed to provide optimum perfmance f all applications air conditioning and heat pump, medium and low temperature refrigeration. 0THERMOSTTI ELEMENT DESIGN Long lasting and field proven stainless steel diaphragm and welded element construction. 0DIPHRGM DESIGN Large flat diaphragm permits precise valve control. 0 REPLELE THERMOSTTI ELEMENTS 0 Field replaceable elements on all standard valves. 0ESSILE INTERNL PRTS 0 Durable, leakproof body joint construction allows the valve to be disassembled, and the internal parts cleaned and inspected. 0PIN RRIER DESIGN (ONVENTIONL VLVES) Provides precise pin and pt alignment, and tighter seating. 0LNED PORT DESIGN 0 Provides perfect pin and pt alignment, and prevents changes in pressure drop across the valve from influencing valve operation. Provides excellent control on applications with widely varying operating conditions. 0MTERILS OF ONSTRUTION 0 Pin and pt materials offer maximum protection against crosion and erosion. 0SILVER SOLDERED ONNETIONS 0 F leakproof, high strength connection-to-body joints. 0 DJUSTLE SUPERHET DESIGN 0 ll standard valves are externally adjustable. The thermostatic expansion valve (TEV) controls the flow of liquid refrigerant entering the direct expansion (DX) evapat by maintaining a constant superheat of the refrigerant vap at the outlet of the evapat. The TEV controls the difference between the actual temperature and the saturation temperature of the refrigerant cresponding to the suction pressure at the sensing bulb location; this is superheat. y controlling superheat, the TEV keeps most of the evapat surface active, while preventing liquid refrigerant from returning to the compress. The ability of the TEV to match refrigerant flow to the rate at which refrigerant can be vapized in the evapat makes the TEV the ideal expansion device f most air conditioning and refrigeration applications. TLE OF ONTENTS Selection Procedure...2 Valve Nomenclature / Ordering Instructions... Recommended Thermostatic harges... TEV apacity Ratings f Refrigerants: 22, 14a, 401, 402, 404, 407, 408, 409, 410, 422D, and apacity Tables f Refrigerants: 22, 14a, 401, 402, 404, 407, 408, 409, 410, 422D, and TEV Quick Reference Guide Valve Specifications R...12 R...1 RI...14 F & EF Q, EQ, & SQ Q, EQ, & SQ G...22 EG...2 F...24 SF & EF S...27 ES...28 O H...1 M... 2 V... W... 4 Materials and Details of onstruction... 5 OEM Thermostatic Expansion Valves... 6 Refer to ulletin 10-9 f a complete discussion on The They of Operation and pplication of Thermostatic Expansion Valves. Refer to ulletin f a complete discussion on Installing and Servicing Thermostatic Expansion Valves. FOR USE ON REFRIGERTION and/ IR ONDITIONING SYSTEMS ONLY ulletin 10-10, July 2008 supersedes ulletin 10-10, January 1998, ulletin , September 2007, ulletin , November 1999, and all pri publications. opyright 2008 by Parker Hannifin pation, Splan Division, Washington, Missouri

3 2 ULLETIN t SELETION PROEDURE The following procedure should be used when selecting a Splan TEV: 1. Determine the liquid temperature of the refrigerant entering the valve. The TEV capacity tables on pages 4 to 8 are based on a liquid temperature of 100 F f R-22, R-14a, R401, R-402, R-404, R-407, R-408, R-409, R-410, and R-507. F other liquid temperatures, apply the crection fact given in the tables f each refrigerant. F example see Table. 2. Determine pressure drop across valve. The pressure drop crection facts are based on standard liquid temperature and pressure drop. The standard pressure drop is dependent on the evapat temperature. To determine the pressure drop, subtract the saturated pressure equivalent to evapat temperature from the condensing pressure. The condensing pressure used in this calculation should be the minimum operating condensing pressure of the system. From this value, subtract all other pressure losses to obtain the net pressure drop across the valve. Use this value to determine the pressure drop crection fact. F example see Table. e sure to consider all of the following possible sources of pressure drop: 1. Friction losses through refrigeration lines including the evapat and condenser. 2. Pressure drop across liquid line accessies such as a solenoid valve and filter-drier.. Static pressure loss (gain) due to the vertical lift (drop) of the liquid line. 4. Pressure drop across a refrigerant distribut if used. Refer to ulletin f infmation on refrigerant distributs.. Select valve from the capacity tables. Select a valve based on the design evapating temperature. If possible the valve capacity should be equal slightly exceed the design rating of the system. e sure to apply the appropriate crection facts f liquid temperature and pressure drop. Once the desired valve capacity has been located, determine the nominal capacity of the valve from the tables second column. On multiple evapat systems, select each valve on the basis of individual evapat capacity. F example see Table. 4. Determine if an external equalizer is required. The amount of pressure drop between the valve outlet and bulb location will determine if an external equalizer is required. Refer to ulletin 10-9 f further infmation on this subject. 5. Select body type. Select the body type accding to the style connections desired. F complete specifications on each TEV type including nominal ratings, refer to pages 9 to Select the Splan Selective Thermostatic harge. Select the charge accding to the design evapating temperature from the Table on page. Refer to ulletin 10-9 f a complete discussion of the available Splan Selective Thermostatic harges. Selection Example Refrigerant 22 pplication: medium temperature refrigeration Design evapat temperature F Design condenser temperature F Refrigerant liquid temperature F Design system capacity... 1 ton vailable pressure drop across TEV: ondensing pressure (psig) Evapating pressure (psig) Liquid line and accessies loss (psi)... 4 Distribut and tubes loss (psi) Q Refrigerant liquid crection fact Pressure drop crection fact Use the following fmula to calculate TEV capacity: TEV apacity = TEV rating x F liquid temperature x F pressure drop EGVE-1 has valve capacity of: 1.09 x 1.17 x 0.89 = 1.14 Tons at 20 F evapating temperature, 100 psi pressure drop and 70 liquid temperature. Thermostatic charge (from table on page ): V W Selection: EGVE-1- /8 x 1/2 x 1/4 ODF x 5 Q n externally equalized valve must be used on evapats employing a refrigerant distribut due to the pressure drop created by the distribut. In addition, an externally equalized valve should always be used with air conditioning thermostatic charges to reduce the possibility of thermostatic charge migration. W Please note that the refrigerant charge designation in the thermostatic charge ( V in this case) is dropped when it is incpated into the valve model designation. t THERMOSTTI EXPNSION VLVE PITIES f S - TONS IR ONDITIONING, HET PUMP and OMMER VLVE TYPES NOMINL PITY 22 REOMMENDED THERMOSTTI V, VP100, VG VZ, VZP40 EVPORTOR TEMPERTURE F F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG 1/ G-EG / F-EF-G-EG F-EF-G-EG 1-1/ Table The valve capacity should equal slightly exceed the tonnage rating of the system. (F complete R-22 capacity tables, see pages 4 and 5.) Design Evapating Temperature EVPORTOR TEMPERTURE F Liquid Temperature LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE TEV Pressure Drop PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & & Table Table

4 t SELETION PROEDURE ULLETIN Valve Nomenclature / Ordering Instructions ombine the letters and numbers in the following manner to obtain the complete valve designation. lso include all connection sizes and the capillary tube length. EXMPLE EG V E 1 ody Splan ode Refrigerant Element Label ol ode F = R-12 Yellow V = R-407 Green E = R-1 lue N = R-407 Lt. rown V = R-22 Green S = R-408 Purple G = R-2 lue F = R-409 Yellow M = R-124 lue Z = R-410 Rose J = R-14a lue V = R-422D Green X = R-401 Pink R = R-502 Purple L = R-402 Sand W = R-50 lue S = R-404 Orange P = R-507 Teal W = R-508 lue E specifies external equalizer. Omission of letter E indicates valve with internal equalizer. e.g. EGV-1- Nominal apacity in Tons Thermostatic harge /8 ODF SOLDER Inlet onnection Size and Style x 1/2 ODF SOLDER Outlet onnection Size and Style x 1/4 ODF SOLDER x 5 onnection Size and Style apillary Tubing Length Inches Feet REOMMENDED THERMOSTTI HRGES* SPORLN SELETIVE HRGES ENGINEERED f PEK PERFORMNE f EH SPEIFI PPLITION PPLITION ir onditioning ommercial 50 F to -10 F Low Temperature 0 F to -40 F Extreme Low Temperature -40 F to -100 F TUL 12, 22, 422D, THERMOSTTI a , HRGES FP60 JP60 XP60 FP60 VP100 NP100 VP100 ZP200 ZP200 VG NG VG SP115 RP115 SP115 ZG ZG F J X F V N V S R S L P P FZ FZ FZP FZP VZ VZ VZP40 VZP40 LZ SZ RZ PZ SZ LZP SZP RZP PZP SZP VX VX LX SX RX PX SX *PPLITION FTORS: 1. The ZP charges have essentially the same characteristics as the Z charge with one exception: they produce a pressure limit Maximum Operating Pressure (MOP). ZP charges are not intended as replacements f Z charges. Each should be selected f its own unique purpose. 2. ll air conditioning and heat pump charges are intended f use with externally equalized valves.. L liquid charges are also available f most commonly used refrigerants in most element sizes. 4. The X charges are not to be used with ES and O valves. 5. If in doubt as to which charge to use, review the section on thermostatic charges in ulletin 10-9 contact Splan Division of Parker, Washington, Missouri with complete system data. 6. F dual temperature applications, use the charge. 7. The charge may be used on applications down to -0 F on R-22, R-404 and R-507. TEV PITY RTINGS FOR S: 22, 14a, 401, 402, 404, 407, 408, 409, 410, 422D, 507 TEV capacity ratings f R-22, R-14a, R-401, R-402, R-404, R-407, R-408, R-409, R-410, R-422D, and R-507 are based on vap free 100 F liquid refrigerant entering the expansion valve, a maximum opening superheat of 7 F, and a standard facty air test superheat setting. discussion of the relationship between valve capacities and superheat settings can be found in ulletin The ratings f evapat temperatures 40 F, 20 F, -10 F, -40 F in the capacity tables are in accdance with NSI/RI Standard Number 750. TEVs are tested in accdance with NSI/SHRE 17. TEV models featuring the mechanical pressure limit style thermostatic elements, i.e., the s G(PL) and (PL) TEVs, are now obsolete. onsult ulletin f additional infmation on this subject and replacement valves. F TEV capacity ratings at operating conditions not shown in the following tables, contact Splan Division of Parker.

5 4 ULLETIN t THERMOSTTI EXPNSION VLVE PITIES f S - TONS OF REFRIGERTION 22, 422D, 407 IR ONDITIONING, HET PUMP and OMMERIL REFRIGERTION PPLITIONS VLVE TYPES NOMINL PITY DQ 407 REOMMENDED THERMOSTTI HRGE V, VP100, VG VZ, VZP40 V, VP100, VG VZ, VZP40 N, NP100, NG EVPORTOR TEMPERTURE F F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG 1/ G-EG / F-EF-G-EG F-EF-G-EG 1-1/ F&EF(Ext)-G&EG(Ext)-S F&EF (Int)-G&EG(Int) 2-1/ F&EF (Ext)-G&EG (Ext)-S S S S(Ext) S(Ext) H 5-1/ H H H H M M M M LNED PORT THERMOSTTI EXPNSION VLVES F-EF-SF F-EF-SF F-EF-SF F-EF-SF F-EF-SF ES ES ES ES O O O O O O V V V W W VLVE TYPES RTRIDGE NO. REPLELE RTRIDGE THERMOSTTI EXPNSION VLVES Q-EQ-SQ 0 1/ Q-EQ-SQ 1 / Q-EQ-SQ Q-EQ-SQ 1-1/ Q-EQ-SQ 4 2-1/ Q-EQ-SQ 5-1/ Q-EQ-SQ Q-EQ-SQ alanced pt replaceable cartridges,,,, and, have the same capacities as the matching nominal capacity of the standard balanced pt valves above. LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE D EVPORTOR TEMPERTURE F PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & & Q R-422D can be used in a system with R-22 valves, but the TEV capacity will be reduced. Please verify valve capacity will handle system load. These facts include crections f liquid refrigerant density and net refrigerating effect and are based on an evapat temperature of 0 F. However, they may be used f any evapat temperature from -40 F to 40 F since the variation in the actual facts across this range is insignificant. TEV apacity = TEV Rating x F Liquid Temperature x F Pressure Drop Example: ctual capacity of a nominal 2 ton R-22 S valve at 20 F evapat, 100 psi pressure drop across the TEV, and 90 F liquid temperature entering the TEV = 2.18 (from rating chart) x 1.06 (F liquid temperature) x 0.89 (F pressure drop) = 2.06 tons.

6 t THERMOSTTI EXPNSION VLVE PITIES f S - TONS OF REFRIGERTION ULLETIN , 422D, 407 IR ONDITIONING and HET PUMP PPLITIONS LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE D EVPORTOR TEMPERTURE F VLVE TYPES NOMINL PITY PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & DQ 407 REOMMENDED THERMOSTTI HRGE VP100, VGW EVPORTOR TEMPERTURE F R, R R, R 1-1/ R, R R, R R, R R, R R, R R R R RIVE E RIVE E RIVE E RIVE E These facts include crections f liquid refrigerant density and net refrigerating effect and are based on an evapat temperature of 0 F. However, they may be used f any evapat temperature from -40 F to 40 F since the variation in the actual facts across this range is insignificant. TEV apacity = TEV Rating x F Liquid Temperature x F Pressure Drop Example: ctual capacity of a nominal 2 ton R-22 S valve at 20 F evapat, 100 psi pressure drop across the TEV, and 90 F liquid temperature entering the TEV = 2.18 (from rating chart) x 1.06 (F liquid temperature) x 0.89 (F pressure drop) = 2.06 tons. Q R-422D can be used in a system with R-22 valves, but the TEV capacity will be reduced. Please verify valve capacity will handle system load. W The R valve f R-22 applications is only available with a VG element. E The Nominal apacity of the valve is increased by 15% when the Rapid Pressure alancer (RP) feature is used. cross drilling is part of the internal construction of the RP feature and this drilling provides the additional refrigerant flow. t THERMOSTTI EXPNSION VLVE PITIES f S - TONS OF REFRIGERTION 410 IR ONDITIONING and HET PUMP PPLITIONS VLVE TYPES NOMINL PITY 410 REOMMENDED THERMOSTTI HRGE ZP200, ZGQ EVPORTOR TEMPERTURE F R, R R, R 1-1/ R, R R, R R, R R, R R, R R R 12-1/ R LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE Q The R valve f R-410 applications is only available with a ZG element. VLVE TYPES VLVE TYPES EVPORTOR TEMPERTURE F NOMINL PITY 410 REOMMENDED THERMOSTTI HRGE ZP200, ZG EVPORTOR TEMPERTURE F OZE OZE OZE OZE OZE RTRIDGE TYPE EQ, SQ 1/ EQ, SQ 2/ EQ, SQ 1-1/ EQ, SQ EQ, SQ 5-1/ PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP &

7 6 ULLETIN t THERMOSTTI EXPNSION VLVE PITIES f S - TONS OF REFRIGERTION 404, 408 OMMERIL and LOW TEMPERTURE REFRIGERTION PPLITIONS VLVE TYPES NOMINL PITY REOMMENDED THERMOSTTI HRGE S, SP115 SZ, SZP S, SP115 SZ, SZP EVPORTOR TEMPERTURE F F-EF-G-EG F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG F-EF-G-EG 1-1/ F&EF(Ext)-G&EG(Ext)-S S S S (Ext) S (Ext) H H H 6-1/ H H M M M M LNED PORT THERMOSTTI EXPNSION VLVES F-EF-SF F-EF-SF F-EF-SF F-EF-SF F-EF-SF ES ES 7-1/ ES ES O O O O O O V V V VLVE TYPES RTRIDGE NO. REPLELE RTRIDGE THERMOSTTI EXPNSION VLVES Q-EQ-SQ 0 1/ Q-EQ-SQ 1 1/ Q-EQ-SQ 2 1/ Q-EQ-SQ Q-EQ-SQ 4 1-1/ Q-EQ-SQ Q-EQ-SQ Q-EQ-SQ alanced pt replaceable cartridges,,,, and, have the same capacities as the matching nominal capacity of the standard balanced pt valves above. LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE These facts include crections f liquid refrigerant density and net refrigerating effect and are based on an evapat temperature of 0 F. However, they may be used f any evapat temperature from -40 F to 40 F since the variation in the actual facts across this range is insignificant. EVPORTOR TEMPERTURE F PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & & TEV apacity = TEV Rating x F Liquid Temperature x F Pressure Drop Example: ctual capacity of a nominal 1-1/2 ton R-404 EG valve at -20 F evapat, 125 psi pressure drop across the TEV, and 60 F liquid temperature entering the TEV = 1.26 (from rating chart) x 1.4 (F liquid temperature) x 0.91 (F pressure drop) = 1.64 tons.

8 ULLETIN THERMOSTTI EXPNSION VLVE t PITIES f S - TONS OF REFRIGERTION 402, 507 OMMERIL and LOW TEMPERTURE REFRIGERTION PPLITIONS VLVE TYPES NOMINL PITY REOMMENDED THERMOSTTI HRGE L LZ, LZP P PZ, PZP EVPORTOR TEMPERTURE F F-EF-G-EG F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG F-EF-G-EG 1-1/ F&EF(Ext)-G&EG(Ext)-S S S S (Ext) S (Ext) H H H 6-1/ H H M M M M LNED PORT THERMOSTTI EXPNSION VLVES F-EF-SF F-EF-SF F-EF-SF F-EF-SF F-EF-SF ES ES 7-1/ ES ES O O O O O O V V V VLVE TYPES RTRIDGE NO. REPLELE RTRIDGE THERMOSTTI EXPNSION VLVES Q-EQ-SQ 0 1/ Q-EQ-SQ 1 1/ Q-EQ-SQ 2 1/ Q-EQ-SQ Q-EQ-SQ 4 1-1/ Q-EQ-SQ Q-EQ-SQ Q-EQ-SQ alanced pt replaceable cartridges,,,, and, have the same capacities as the matching nominal capacity of the standard balanced pt valves above. LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE These facts include crections f liquid refrigerant density and net refrigerating effect and are based on an evapat temperature of 0 F. However, they may be used f any evapat temperature from -40 F to 40 F since the variation in the actual facts across this range is insignificant. EVPORTOR TEMPERTURE F PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & & TEV apacity = TEV Rating x F Liquid Temperature x F Pressure Drop Example: ctual capacity of a nominal 1-1/2 ton R-404 EG valve at -20 F evapat, 125 psi pressure drop across the TEV, and 60 F liquid temperature entering the TEV = 1.26 (from rating chart) x 1.4 (F liquid temperature) x 0.91 (F pressure drop) = 1.64 tons.

9 8 ULLETIN t THERMOSTTI EXPNSION VLVE PITIES f S - TONS OF REFRIGERTION 14a, 401, 409 IR ONDITIONING, HET PUMP and OMMERIL REFRIGERTION PPLITIONS VLVE TYPES NOMINL PITY 14a REOMMENDED THERMOSTTI HRGE J, JP60 X, XP60 F, FP60 EVPORTOR TEMPERTURE F F-EF-G-EG F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG 1/ F-EF-G-EG F-EF-G-EG 1-1/ F&EF(Ext)-G&EG(Ext)-S S 2-1/ S S (Ext) S (Ext) H H H H H M M M LNED PORT THERMOSTTI EXPNSION VLVES F-EF-SF F-EF-SF F-EF-SF F-EF-SF F-EF-SF ES ES ES ES O O O O O O V V V W W VLVE TYPES RTRIDGE NO.. REPLELE RTRIDGE THERMOSTTI EXPNSION VLVES Q-EQ-SQ 0 1/ Q-EQ-SQ 1 1/ Q-EQ-SQ 2 1/ Q-EQ-SQ Q-EQ-SQ 4 1-1/ Q-EQ-SQ Q-EQ-SQ 6 2-1/ Q-EQ-SQ alanced pt replaceable cartridges,,,, and, have the same capacities as the matching nominal capacity of the standard balanced pt valves above. LIQUID TEMPERTURE ENTERING TEV F ORRETION FTOR, F LIQUID TEMPERTURE 14a EVPORTOR TEMPERTURE F PRESSURE DROP ROSS TEV (psi) ORRETION FTOR, F PRESSURE DROP & These facts include crections f liquid refrigerant density and net refrigerating effect and are based on an evapat temperature of 0 F. However, they may be used f any evapat temperature from 0 F to 40 F since the variation in the actual facts across this range is insignificant. TEV apacity = TEV Rating x F Liquid Temperature x F Pressure Drop Example: ctual capacity of a nominal 1-1/2 ton R-14a EG valve at 20 F evapat, 100 psi pressure drop across the TEV, and 60 F liquid temperature entering the TEV = 1.91 (from rating chart) x 1.29 (F liquid temperature) x 1.12 (F pressure drop) = 2.76 tons.

10 t TEV QUIK REFERENE GUIDE ULLETIN R VLVE TYPE SPES 12 NOMINL PITY RNGE (Tons) R-22 R-14a 1 6 R-404 & R-507 R ONNETION TYPES hatleff, SE Flare, ODF Solder VLVE DESRIPTION ND PPLITION Small brass body, externally adjustable valve available f R-22 and R-410 air conditioning and heat pump applications. This valve features a balanced pt construction and contains an internal check valve to eliminate the need f an external bypass check valve on heat pump applications. Suitable f replacing OEM type TEVs with without internal check valve on these applications. R ODF Solder Small brass body, externally adjustable valve available f R-22 and R-410 air conditioning and heat pump applications. This valve features a balanced pt construction and is approved f bi-directional operation. Suitable f replacing OEM type TEVs without internal check valve on these applications. RI ODF Solder Small brass bar body, externally adjustable valve available only f R-22 air conditioning heat pump applications. This valve is provided with the Rapid Pressure alancer (RP) feature f off-cycle pressure equalization. Suitable f replacing OEM type TEVs used on these applications. F /5 2 2 SE Flare Small brass bar body, externally adjustable valve f small capacity refrigeration systems. SE flare inlet connection has a removable 100 mesh strainer. Typical applications: Refrigerated cases, coolers, freezers. EF /5 2 2 ODF Solder Same as the F valve except valve features ODF solder connections. The inlet connection has a 60 x 50 mesh insert type strainer. Typical applications: Refrigerated cases, coolers, freezers. Q/Q Q 1/ 5 Q 5-1/2 Q 1/6 2-1/2 Q Q 1/6 Q Q Q SE Flare The brass body Q valve is externally adjustable with a removable cartridge ifice. The valve body, cartridge and thermostatic element is supplied as independent components. This allows body, cartridge and element to be assembled and matched to specific system requirements. Inlet connection has a 100 mesh removable strainer screen. Typical applications: applications and external equalized versions may be used on air conditioning. Q same as above, with balanced pt construction. EQ/EQ EQ 1/ 5 EQ 5-1/2 EQ 1/6 2-1/2 EQ EQ 1/6 EQ EQ EQ 1/4 5-1/2 Extended ODF Solder EQ same as the Q except it features extended ODF connections. 100 mesh insert strainer is provided with the valve. EQ same as EQ with balanced pt construction and is approved f bi-directional applications.

11 10 ULLETIN t TEV QUIK REFERENE GUIDE VLVE TYPE SQ/SQ SPES NOMINL PITY RNGE (Tons) R-22 R-14a SQ 1/ 5 SQ 5-1/2 SQ 1/6 2-1/2 SQ R-404 & R-507 SQ 1/6 SQ R-410 SQ SQ 1/4 5-1/2 ONNETION TYPES Extended ODF Solder VLVE DESRIPTION ND PPLITION SQ same as the Q valve except it features ODF solder connections and a fged brass inlet fitting with a removable 100 mesh strainer screen which can be cleaned and/ replaced without removing the valve from the line. SQ is the same as SQ with balanced pt construction and is approved f bi-directional applications. G 22 1/5 2 2 SE Flare Fged brass body, externally adjustable valve f small capacity refrigeration systems. Inlet connection has a removable 100 mesh strainer. Typical applications: Refrigerated cases, coolers, freezers, small capacity air conditioners. EG 2 1/5 2 2 ODF Solder Same as the G valve except it features ODF solder connections and a fged brass inlet fitting with a removable 100 mesh strainer which can be cleaned and/ replaced without removing the valve from the line. F /2 SE Flare Same physical size as the F valve with SE flare connections except it features a balanced pt construction. Inlet connection has a removable 100 mesh strainer. Typical applications: Small capacity refrigeration that operates over widely varying operating conditions. SF /2 Extended ODF Solder Same as the F valve except it features ODF solder connections and a fged brass inlet fitting with a removable 100 mesh strainer which can be cleaned and/ replaced without removing the valve from the line. EF /2 Extended ODF Solder Same as the F valve except it features extended ODF connections. 100 mesh insert strainer is provided with the valve. S ODF Solder rass bar body, externally adjustable valve. Inlet has a permanent 12 mesh strainer. General purpose valve f air conditioning and refrigeration applications.

12 t TEV QUIK REFERENE GUIDE ULLETIN ES VLVE TYPE SPES NOMINL PITY RNGE (Tons) R-22 R-14a R-404 & R-507 R-410 ONNETION TYPES VLVE DESRIPTION ND PPLITION Extended ODF Solder Same physical size as the S valve except it features extended ODF connections. This valve features a balanced pt construction which, depending on its capacity, makes it suitable f bi-directional operation. See page 28 f details. O ODF Solder rass bar body, externally adjustable valve. Inlet has a permanent 12 mesh strainer. This valve features a balanced pt construction, and it is suitable f both air conditioning and refrigeration applications. Optional bi-directional feature available, please contact Splan Division of Parker f details. H 1 5-1/ ODF Solder FPT Flange rass bar body, externally adjustable valve with flange connections. Inlet flange bushing has a permanent 16 mesh strainer. The FPT flange connection requires the K-1178 adapter kit. This valve provides the smallest capacity TEVs with flange connections and it is suitable f both air conditioning and refrigeration applications. M ODF Solder FPT Flange ast bronze body, externally adjustable valve with flange connections. Inlet has a 12 mesh strainer. This valve type provides valve capacities greater than the H and it is suitable f air conditioning and refrigeration applications. Flanges f the M valve are interchangeable with the V valve. V ODF Solder FPT Flange ast bronze body, externally adjustable valve with flange connections. Inlet has a 12 mesh strainer. This valve type features a dual pt semi-balanced design. This valve type provides valve capacities greater than the M and is suitable f air conditioning and refrigeration applications. Flanges f the V are interchangeable with the M. W 4 15 & & 110 ODF Solder Flange ast bronze body, externally adjustable valve with flange connections. Inlet has a 12 mesh strainer. This valve type features a dual pt semi-balanced design and it is primarily f large capacity chillers. This valve type provides the largest valve capacities available f flange connection TEVs.

13 12 ULLETIN t TYPE R F Refrigerants 22, 410 hatleff, SE Flare & ODF Solder onnections Splan R valve is a small brass body, externally adjustable valve with balanced pt construction. The R valves are available f replacement of types I and I valves. These valves contain internal check valves to allow reverse flow on heat pump applications. This eliminates the need f an external check valve piped around the TEV f reverse flow. The R valve can be used on heat pump and air conditioning (cooling only) applications. This allows you to reduce inventy by using the same valve to replace the I, I and I valves. The R valves can even be used to replace the RI valve (non- RP versions only). Outlet onnections 1/2 SE, 1/2 ODF, 5/8 ODF Mating Distributs (See ulletin 20-10) D260, D262, 160, 1605, 1606, 1608, 1620, 1622, 1650(R), 1651(R) F complete details of construction, see page 5. R SPEIFITIONS ELEMENT SIZE NO. 4 (R-22) ND NO. 45 (R-410), KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) VLVE TYPE EXTERNL EQULIZER W, E NOMINL PITY Tons of THERMOSTTI ELEMENT SIZE NO. THERMOSTTI HRGES VILLE TUING LENGTH Inches INLET RVE-1-G 1 RVE-1-1/2-G 1-1/2 /8 SE RVE-2-G 2 /8 ODF 1/4 SE RVE--G 4 VG 1/4 ODF RVE-4-G 4 1/2 ODF RVE-5-G 5 1/2 SE RVE-6-G 6 0 1/2 ODF ONNETIONS - Inches Q SE Flare/ R ODF Solder lue figures are standard and will be furnished unless otherwise specified. OUTLET 1/2 SE 1/2 ODF 1/2 ODF 1/2 SE 5/8 ODF RZE-1-G 1 RZE-1-1/2-G 1-1/2 /8 ODF 1/2 ODF RZE-2-G (Z) RZE--G 1/4 ODF 45 ZG RZE-4-G 4 1/2 ODF 1/2 ODF RZE-5-G 5 RZE-6-G 6 1/2 ODF 5/8 ODF Q Valves are also available as special der with hatleff connections. W Valves with SE inlet and outlet fittings are available only with the 1/4 SE flare external equalizer; valves w ith ODF fittings are available only with the 1/4 ODF external equalizer. E Valves with hatleff fittings are available only with the OD X 24 long tube with flare and nut external equalizer. R ODF Solder on R valves indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. NET SHIPPING 1-1/4 1-1/2 DIMENSIONS ONNETIONS - Inches 1.94 ap Tube 0 VLVE TYPE FITTING SIZE D /8 SE /2 SE R /8 ODF /2 ODF /8 ODF R hatleff Fitting E UL SIZES - Inches HRGES G 0.75 OD x /4 ODF onnnection D 0 Top View hatleff Fitting Option E

14 t TYPE R ULLETIN F Refrigerants 22, 410 ODF Solder onnections Splan R valve is a small brass bar body, externally adjustable with ODF solder connections, a replaceable thermostatic element, and balanced pt construction. The R valve is designed f R-22 and R-410 air conditioning and heat pump applications and is ideal f replacing I, I, I and RI (non-rp version only) valves. This valve type has two body styles: a small body which provides capacities up to 8 tons R-22 and R-410, and a large body style which extends capacities to 12 tons R-22 and 15 tons R-410. Replacement elements available f these valves are the following: Refrigerant R-22, Element Kit Number KT-4-VG VP100 f the small body style and KT-45-5-VG VP100 f the large body, and Refrigerant R-410, Element Kit Number KT-45-ZG ZP200 f the small body style and KT-45-5-ZG ZP200 f the large body style. This valve may also be applied in bi-directional applications. Outlet onnections 1/2 ODF, 5/8 ODF, 7/8 ODF, 1- ODF Mating Distributs (See ulletin 20-10) D260, D262, 1620, 1622, 1112, 111, 1115, 1116, 115, 116, 117, 1651(R), 165(R), 1655(R) F complete details of construction, see page 5. R SPEIFITIONS ELEMENT SIZE NO. 4 (R-22), NO. 45 (R-410), ND NO. 45-5, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 410 (Z) VLVE TYPE DIMENSIONS ONNETIONS - Inches VLVE TYPE RVE & RZE 1, 1-1/2 & 2* RVE & RZE, 4, 5, 6 & 8 NOMINL PITY Tons of THERMOSTTI ELEMENT SIZE NO. THERMOSTTI HRGES VILLE TUING LENGTH Inches ONNETIONS -Inches W Q ODF Solder lue figures are standard and will be furnished unless otherwise specified. NET INLET OUTLET RVE-1 1 /8 RVE-1-1/2 1-1/2 /8, 1/2 5/8 RVE-2 2 /8 1/2 RVE- 0 4 RVE-4 4 VG /8, 1/2 5/8 1/2, 5/8 7/8 1 RVE-5 5 VP100 RVE-6 6 /8, 1/2 5/8 1/2, 5/8 7/8 RVE-8 8 /8, 1/2 5/8 1/2, 5/8 7/8 RVE RVE /2, 5/8 7/8 5/8, 7/8, 1-1-1/4 RZE-1 1 /8 RZE-1-1/2 1-1/2 /8, 1/2 5/8 RZE-2 2 /8 1/2 RZE RZE-4 4 ZG /8, 1/2 5/8 1/2, 5/8 7/8 1 RZE-5 5 ZP200 RZE-6 6 /8, 1/2 5/8 1/2, 5/8 7/8 RZE-8 8 /8, 1/2 5/8 1/2, 5/8 7/8 RZE-12-1/2 12-1/ RZE /2, 5/8 7/8 5/8, 7/8, 1-1-1/4 Q ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. W Minimum quantities may apply to non-standard connections. Not all connection combinations are available. RVE-10 & 12 RZE-12-1/2 & 15 * 1/2 ODF inlet available on 2 ton valves only. FITTING SIZE D E F G /8 ODF /2 ODF 1.75* /8 ODF /8 ODF /2 ODF /8 ODF /8 ODF /8 ODF /8 ODF /8 ODF Ext /8 ODF Ext ODF Ext /4 ODF onnnection Top View D UL SIZES - Inches 0 HRGES VP100, ZP OD x.00 G 0.75 OD x 2.00 F E 1.94 SHIPPING 1-1/2 1-1/2 G

15 14 ULLETIN t TYPE RI WITH RPID PRESSURE LNE (RP) F Refrigerant 22 ODF Solder onnections Splan RI valve is a small brass bar body, externally adjustable valve available with ODF solder connections, and a replaceable thermostatic element. The RIVE valve is designed f small R-22 air conditioning and heat pump units with limited space and which require the Rapid Pressure alancer (RP) feature f off-cycle pressure equalization. This valve is also ideal f replacement of OEM type Splan TEVs such as the I when used on the above applications. Refer to Splan ulletin 10-9 f additional infmation on this subject. Outlet onnections 1/2 ODF, 5/8 ODF Mating Distributs (See ulletin 20-10) D260, D262, 1620, 1622, 1651(R) F complete details of construction, see page 5. RI SPEIFITIONS ELEMENT SIZE NO. 4, KNIFE EDGE JOINT (Splan ode) VLVE TYPE Only W NOMINL PITY Tons of THERMOSTTI HRGES VILLE TUING LENGTH Inches ONNETIONS - Inches Q ODF Solder lue figures are standard and will be furnished unless otherwise specified. INLET OUTLET NET SHIPPING 22 (V) 407 (N) 407 (V) 422D (V) RIVE-2 2 RIVE- RIVE-4 4 RIVE-5 5 G 0 /8 1/2 1/2 1/2 5/ /2 Q ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. W The Nominal apacity of the valve is increased by 15% when the Rapid Pressure alancer (RP) feature is used. cross drilling is part of the internal construction of the RP feature and this drilling provides the additional refrigerant flow /4 ODF onnection 1.94 Top View DIMENSIONS ONNETIONS - Inches RP Model FITTING SIZE /8 ODF /2 ODF /8 ODF

16 ULLETIN t TYPE F & EF F Refrigerants 22, 14a, 404, 507 SE Flare & ODF Solder onnections Splan F with SE flare connections EF with ODF solder connections are small brass bar body valves with identical internal construction and replaceable thermostatic elements. The F valve has a removable 100 mesh strainer as a standard feature. The EF has a 60 x 50 mesh insert strainer. These valves are designed f small refrigeration systems such as refrigerated cases, coolers, and freezers where space is limited and an external adjustment is desired. Outlet onnections /8 SE, 1/2 SE, /8 ODF, 1/2 ODF Mating Distributs (See ulletin 20-10) D260, D262, 160, 1605, 1606, 1608, 1650(R) F complete details of construction, see page 5. F EF SPEIFITIONS ELEMENT SIZE NO. 4, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal TYPE F SE Flare TYPE EF ODF Solder Internal NOMINL PITY Tons of FV-1/5 FVE-1/5 EFV-1/5 EFVE-1/5 1/5 FV-1/ FVE-1/ EFV-1/ EFVE-1/ 1/ FV-1/2 FVE-1/2 EFV-1/2 EFVE-1/2 1/2 FV-1 FVE-1 EFV-1 EFVE-1 1 FV-1-1/2 FVE-1-1/2 EFV-1-1/2 EFVE-1-1/2 1-1/2 FVE-2 EFVE-2 2 FV-2-1/2 EFV-2-1/2 2-1/2 EFVE- FJ- FJE- EFJ- EFJE- FJ-1/6 FJE-1/6 EFJ-1/6 EFJE-1/6 1/6 FJ-1/4 FJE-1/4 EFJ-1/4 EFJE-1/4 1/4 FJ-1/2 FJE-1/2 EFJ-1/2 EFJE-1/2 1/2 FJ-1 FJE-1 EFJ-1 EFJE-1 1 FJ-1-1/2 FJE-1-1/2 EFJ-1-1/2 EFJE-1-1/2 1-1/2 FJE-2 EFJE-2 2 FS- FSE- EFS- EFSE- FS-1/6 FSE-1/6 EFS-1/6 EFSE-1/6 1/6 FS-1/4 FSE-1/4 EFS-1/4 EFSE-1/4 1/4 FS-1/2 FSE-1/2 EFS-1/2 EFSE-1/2 1/2 FS-1 FSE-1 EFS-1 EFSE-1 1 FS-1-1/2 FSE-1-1/2 EFS-1-1/2 EFSE-1-1/2 1-1/2 FSE-2 EFSE-2 2 FP- FPE- EFP- EFPE- FP-1/6 FPE-1/6 EFP-1/6 EFPE-1/6 1/6 FP-1/4 FPE-1/4 EFP-1/4 EFPE-1/4 1/4 FP-1/2 FPE-1/2 EFP-1/2 EFPE-1/2 1/2 FP-1 FPE-1 EFP-1 EFPE-1 1 THERMOSTTI HRGES VILLE TUING LENGTH Inches ONNETIONS - Inches SE Flare / W ODF Solder lue figures are standard and will be furnished unless otherwise specified. FP-1-1/2 FPE-1-1/2 EFP-1-1/2 EFPE-1-1/2 1-1/2 /8 E 1/2 FPE-2 EFPE-2 2 Q The /8 SE inlet fitting has a long taper on the flare surface. /8 x 1/4 reducing flare nut will allow 1/4 OD tubing to be attached to this fitting. W ODF Solder on EF valves indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. E Nominal 1 ton and larger F valves f R-14a, R-404 and R-507 type refrigerants, and nominal 1-1/2 ton and larger f R-22 refrigerant require /8 SE Flare /8 ODF inlet, minimum. Z ZP40 Z ZP40 Z ZP40 0 INLET OUTLET 1/4 /8 Q /8 1/2 /8 E 1/2 1/4 /8 Q /8 1/2 /8 E 1/2 1/4 /8 Q /8 1/2 /8 E 1/2 1/4 /8 Q /8 1/2 NET SHIPPING 1 1-1/2

17 16 ULLETIN t TYPE F & EF F Refrigerants 22, 14, 404, 507 SE Flare & ODF Solder onnections SE FLRE DIMENSIONS SE ONNETIONS - Inches FITTING SIZE 1/4 SE Elbow /8 SE Elbow /8 SE /2 SE 1.80 UL SIZES - Inches HRGES 22 14a OD x.00 Z & ZP Series 0.50 OD x OD x /4 SE Inlet P/N /8 SE Inlet P/N /4 SE Fitting Top View ODF SOLDER DIMENSIONS ODF ONNETIONS - Inches 1.94 FITTING SIZE 1/4 ODF /8 ODF /2 ODF UL SIZES - Inches HRGES 22 14a OD x.00 Z & ZP Series 0.50 OD x OD x.00 1/4 ODF onnection /4 ODF Insert P/N /8 ODF Insert P/N Top View 1.81

18 t TYPE Q & Q The Splan Q & Q series are replaceable cartridge style valves designed f small refrigeration systems, such as refrigerated cases, coolers, and freezers. The externally equalized versions of these valves are ideal f air conditioning and heat pump systems. Q valves are balanced pted, engineered specifically f systems with a wide range of operating conditions and may be applied on bi-directional applications. Q & Q valves are supplied as three individual component parts: the thermostatic element, the valve body, and the replaceable cartridge ifice. The interchangeable nature of the Q & Q family make it ideal f reducing inventy, while increasing valve options so, the right valve is always on hand. ODY FETURES Q & Q brass body type valves feature Splan s traditional knife edge, metal-to-metal thermostatic element to valve body construction, which insures a leak-proof joint. SELETIVE HRGES Splan selective thermostatic charges are specifically designed f low temperature, medium temperature, and air conditioning applications. The elements are manufactured with a large flat diaphragm to reduce diaphragm stresses and provide precise control. nd, because Q & Q valve bodies and thermostatic elements are supplied as independent components, the installer is able to select the best possible thermostatic charge f the application. INTERNL PORT DESIGN Refrigerant flow through the valve pt opposes the pin movement in all type Q and Q valves. This provides improved stability at light loads, when the pin modulates to a position close to the pt. dditionally, charge migration, is reduced eliminated by the Q & Q valve design. y engineering the liquid flow to enter through the top of the valve body, the liquid refrigerant warms the thermostatic element and minimizes the potential f charge migration. ULLETIN F Refrigerants 22, 14a, 404, 410*, 507 SE Flare & Extended ODF Solder onnections * Q, EQ, SQ, and Q are not approved f R-410 applications. TYPE onventional Pt TYPE alanced Pt SELETING OMPONENTS ODY F complete details of construction, see page 5. U.S. Patent No. 5,28,219 Replaceable U.S. Patent No. 5,22,015 Flare onnections Extended Solder onnections Extended Solder onnections with Fged Inlet and Replaceable Q SE (Internally Equalized) EQ ODF (Internally Equalized) SQ ODF (Internally Equalized) QE SE (ly Equalized) EQE ODF (ly Equalized) SQE ODF (ly Equalized) Q SE (Internally Equalized) EQ ODF (Internally Equalized) SQ ODF (Internally Equalized) QE SE (ly Equalized) EQE ODF (ly Equalized) SQE ODF (ly Equalized) U.S. Patent No. 5,28,219, Replaceable P/N U.S. Patent No. 5,22,015

19 18 ULLETIN t TYPE Q & Q F Refrigerants 22, 14a, 404, 410*, 507 SE Flare & Extended ODF Solder onnections * Q, EQ, SQ, and Q are not approved f R-410 applications. RTRIDGE Q RTRIDGE SERVIE KIT PRT NUMER Top surface is col coded to identify cartridge capacity apacity code on cartridge. 2 Q-0 - Red Qty. Q-1 - Yellow Qty. 5 Q-2 - Green Qty. 5 Q- - lue Qty. 5 Q-4 - Pink Qty. SPORLN mm llen Wrench Oil ottle 6 Identification tag with cartridge number (bends around capillary tubing). Q-5 - lack Qty. Q-6 - White Qty. INDIVIDUL REPLEMENT PRTS PRT NUMER SIZE OLOR ODE Q-0 Q-1 Q-2 Q- Q-4 Q-5 Q-6 RTRIDGE and I.D. TG Red Yellow Green lue Pink lack White MISELLNEOUS PRTS O-1 Oil ottle (With Oil) W-1 4 mm llen Wrench SK-1 Q artridge Service Kit (Empty) Q artridge Service Kit (omplete as noted above) PITIES NOMINL PITY (TONS) of SPORLN VLVE TO E REPLED Q VLVE RTRIDGE R-12 R-22, R-422D R-14a R-401 R-402 R-404 R-410 R-502 R-507 SIZE OLOR ODE 1/4 1/6 1/ 1/6 1/6 1/6 1/6 1/6 1/6 0 Red 1/4 1/2 /4 1/4 1/4 1/4 1/4 1/4 1/4 1 Yellow 1/2 1 1/2 1/2 1/2 1/2 1/2 1/2 2 Green 1 1-1/ lue 1-1/ /2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 4 Pink lack 2-1/ /2 2-1/2 5 6 White NOT PPROVED Q RTRIDGE SERVIE KIT PRT NUMER Top surface is col coded to identify cartridge capacity. apacity code on cartridge. SPORLN Identification tag with cartridge number (bends around capillary tubing). Q- - Red Qty. 2 Q artridge Tool Q SPORLN Q- - Yellow Qty. 4 Q- - lue Qty. 4 Q- - Pink Qty. 1 Oil ottle Q- - Pink Qty. 2 Q- - White Qty. 2 INDIVIDUL REPLEMENT PRTS PRT NUMER SIZE OLOR ODE Q- Q- Q- Q- Q- RTRIDGE and I.D. TG MISELLNEOUS PRTS Red Yellow lue Pink White O-1 Oil ottle (With Oil) Q artridge Tool Q artridge Service Kit SK-1 (Empty) Q artridge Service Kit (omplete as noted above) PITIES R-12 1/5 1/4 1/ 1/ /4 1-/4 2 R-22, R-422D 1/ 1/2 2/ /4 1-1/2 1-/4-1/4 5-1/2 NOMINL PITY (TONS) of SPORLN VLVE TO E REPLED Q VLVE RTRIDGE R-14a R-401 R-402 R-404 R-410 R-502 R-507 SIZE OLOR ODE 1/5 1/4 1/ 1/ /4 1-/4 1/5 1/4 1/ 1/ /4 1-/ /5 1/4 1/ 1/ / /4 1/5 1/4 1/ 1/ / /4 1/4 1/ 1/2 /4 1 1-/4 2-1/ /5 1/4 1/ 1/ / /4 1/5 1/4 1/ 1/ / /4 Red Yellow lue Pink White

20 ULLETIN t TYPE Q & Q F Refrigerants 22, 14a, 404, 410*, 507 SE Flare & Extended ODF Solder onnections ELEMENT SPORLN VLVE O WSHINGTON, MO MDE IN U.S. of. R-22 KT-4-V 4 V 5207 Element Label PPLITION 12 apillary Tube Length (standard = 5 ft.) Date ode Label (by week and year of manufacture) KT 4 V bbreviation f Kit ir onditioning ommercial 50 F to -10 F Low Temperature 0 F to -40 F Element Size Number 22, 422D Refrigerant ode Q ulb Thermostatic harge Q While many new refrigerants and refrigerant blends have a unique letter code, many use the same thermostatic element as the traditional refrigerant they replace. Refer to the table below to select the crect thermostatic element. REOMMENDED THERMOSTTI ELEMENTS** 14a SPORLN ODE ELEMENT LEL OLOR ODE F R-12 Yellow V R-22, R-422D Green J R-14a lue X R-401 Pink L R-402 Sand S R-404 Orange V R-407 Green N R-407 Light rown R R-408 Purple F R-409 Yellow Z R-410 Pink R R-502 Purple P R-507 Teal THERMOSTTI ELEMENT SYSTEM MOP psig X X X X KT-4-FP60 50 X X X KT-4-FVP X X X KT-4-VG X X X KT-4-RP X KT-45-ZG X KT-45-ZP X X X X KT-4-F X X X KT-4-V X X X KT-4-R X X KT-4-P X KT-4-FZ X KT-4-FZP 12 X KT-4-VZ X KT-4-VZP40 0 X X X X X KT-4-RZ X X X X X KT-4-RZP 5 **PPLITION FTORS: 1. The Splan ZP thermostatic charges have essentially the same characteristics as the conventional Z cross charges with one exception: they produce a pressure limit MOP. The ZP charges are not intended as replacements f the Z charges - they should only be used where a definite pressure limit is required to prevent mot overloading. 2. ll air conditioning and heat pump charges are intended f use with externally equalized valves.. F dual temperature applications, use the charge. 4. The charge may be used on applications down to -0 F on R-22, R-404 and R R-410 elements f use with SQ and EQ only. ORDERING INSTRUTIONS VLVE NOMENLTURE QE /8 x 1/2 x 1/4 SE Q 2 KT-4 V 5 Valve Q, EQ, SQ Internally Equalized QE, EQE, SQE ly Equalized onnection Size and Style: Inlet x Outlet x artridge artridge Size Element Kit KT-4 Refrigerant ode (See above) Thermostatic harge QE /8 x 1/2 x 1/4 SE Q KT-4 V 5 Valve Q, EQ, SQ Internally Equalized QE, EQE, SQE ly Equalized ODY RTRIDGE ELEMENT ODY RTRIDGE ELEMENT onnection Size and Style: Inlet x Outlet x artridge artridge Size Element Kit KT-4 KT-45 (R-410 only) * Q, EQ, SQ, and Q are not approved f R-410 applications. Refrigerant ode (See above) Thermostatic harge apillary Tube Length apillary Tube Length

21 20 ULLETIN t TYPE Q & Q F Refrigerants 22, 14a, 404, 410*, 507 SE Flare & Extended ODF Solder onnections * Q, EQ, SQ, and Q are not approved f R-410 applications. Q SPEIFITIONS ELEMENT SIZE NO. 4, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal Q SE Flare W ODY TYPE - RTRIDGE Internal Q Extended ODF Solder W Internal Q W RTRIDGE NOMINL PITY Tons of Q-0 QE-0 EQ-0 EQE-0 SQ-0 SQE-0 0 1/ Q-1 QE-1 EQ-1 EQE-1 SQ-1 SQE-1 1 /4 Q-2 QE-2 EQ-2 EQE-2 SQ-2 SQE Q- QE- EQ- EQE- SQ- SQE- 1-1/2 Q-4 QE-4 EQ-4 EQE-4 SQ-4 SQE /2 Q-5 QE-5 EQ-5 EQE-5 SQ-5 SQE-5 5-1/2 Q-6 QE-6 EQ-6 EQE-6 SQ-6 SQE Q-0 QE-0 EQ-0 EQE-0 SQ-0 SQE-0 0 1/6 Q-1 QE-1 EQ-1 EQE-1 SQ-1 SQE-1 1 1/4 Q-2 QE-2 EQ-2 EQE-2 SQ-2 SQE-2 2 1/2 Q- QE- EQ- EQE- SQ- SQE- 1 Q-4 QE-4 EQ-4 EQE-4 SQ-4 SQE /2 Q-5 QE-5 EQ-5 EQE-5 SQ-5 SQE Q-6 QE-6 EQ-6 EQE-6 SQ-6 SQE /2 Q-0 QE-0 EQ-0 EQE-0 SQ-0 SQE-0 0 1/6 Q-1 QE-1 EQ-1 EQE-1 SQ-1 SQE-1 1 1/4 Q-2 QE-2 EQ-2 EQE-2 SQ-2 SQE-2 2 1/2 Q- QE- EQ- EQE- SQ- SQE- 1 Q-4 QE-4 EQ-4 EQE-4 SQ-4 SQE /2 Q-5 QE-5 EQ-5 EQE-5 SQ-5 SQE Q-6 QE-6 EQ-6 EQE-6 SQ-6 SQE-6 6 Q-0 QE-0 EQ-0 EQE-0 SQ-0 SQE-0 0 1/6 Q-1 QE-1 EQ-1 EQE-1 SQ-1 SQE-1 1 1/4 Q-2 QE-2 EQ-2 EQE-2 SQ-2 SQE-2 2 1/2 Q- QE- EQ- EQE- SQ- SQE- 1 Q-4 QE-4 EQ-4 EQE-4 SQ-4 SQE /2 Q-5 QE-5 EQ-5 EQE-5 SQ-5 SQE Q-6 QE-6 EQ-6 EQE-6 SQ-6 SQE-6 6 THERMOSTTI HRGES VILLE Refeer to Recommended Thermostatic Elements on 19 TUING LENGTH Feet 5 ONNETIONS Inches lue figures are standard and will be furnished unless otherwise specified. INLET x OUTLET Q & QE Only 1/4 x /8 SE 90 ngle Inlet 1/4 x 1/2 SE 90 ngle Inlet /8 x 1/2 SE 90 ngle Inlet EQ Only /8 x 1/2 ODF Straight Thru EQE Only /8 x 1/2 ODF Straight Thru /8 x 5/8 ODF Straight Thru 1/2 x 5/8 ODF Straight Thru 1/2 x 7/8 ODF Straight Thru SQ & SQE Only /8 x 1/2 ODF 90 ngle Inlet Q SPEIFITIONS ELEMENT SIZE NO. 4 (R-22) and N0. 45 (R-410), KNIFE EDGE JOINT NET SHIPPING 1 1-1/2 (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 410 (Z) 507 (P) 402 (L) Internal Q SE Flare W ODY TYPE - RTRIDGE Internal Q Extended ODF Solder W Internal Q W Q Valves listed in the column are NOT VILLE with MOP type air conditioning charges. W Standard 1/4 SE (Q and Q ody), 1/4 ODF (SQ, SQ, EQ and EQ ody). E The /8 SE inlet fitting has a long taper on the flare surface. /8 x 1/4 reducing flare nut will allow 1/4 OD tubing to be attached to this fitting. R ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. RTRIDGE NOMINL PITY Tons of Q- QE- EQ- EQE- SQ- SQE- 1/ Q- QE- EQ- EQE- SQ- SQE- 1/2 2/ Q- QE- EQ- EQE- SQ- SQE- /4 1-1/2 Q- QE- EQ- EQE- SQ- SQE- 1-/4 Q- QE- EQ- EQE- SQ- SQE- -1/4 5-1/2 Q- QE- EQ- EQE- SQ- SQE- 1/5 Q- QE- EQ- EQE- SQ- SQE- 1/4 1/ Q- QE- EQ- EQE- SQ- SQE- 1/2 1 Q- QE- EQ- EQE- SQ- SQE- 1-1/4 1-/4 Q- QE- EQ- EQE- SQ- SQE- 2 Q- QE- EQ- EQE- SQ- SQE- 1/5 Q- QE- EQ- EQE- SQ- SQE- 1/4 1/ Q- QE- EQ- EQE- SQ- SQE- 1/2 1 Q- QE- EQ- EQE- SQ- SQE- 1-1/4 2 Q- QE- EQ- EQE- SQ- SQE- 2-1/4 EQ- EQE- SQ- SQE- 1/4 1/ EQ- EQE- SQ- SQE- 1/2 /4 EQ- EQE- SQ- SQE- 1 1-/4 EQ- EQE- SQ- SQE- 2-1/12 EQ- EQE- SQ- SQE- 4 6 Q- QE- EQ- EQE- SQ- SQE- 1/5 Q- QE- EQ- EQE- SQ- SQE- 1/4 1/ Q- QE- EQ- EQE- SQ- SQE- 1/2 1 Q- QE- EQ- EQE- SQ- SQE- 1-1/4 2 Q- QE- EQ- EQE- SQ- SQE- 2-1/4 THERMOSTTI HRGES VILLE Refeer to Recommended Thermostatic Elements on 19 TUING LENGTH Feet 5 ONNETIONS Inches lue figures are standard and will be furnished unless otherwise specified. INLET x OUTLET Q & QE 1/4 x /8 SE 90 ngle Inlet 1/4 x 1/2 SE 90 ngle Inlet /8 x 1/2 SE E 90 ngle Inlet EQ Only /8 x 1/2 ODF R Straight Thru EQE Only /8 x 1/2 ODF R Straight Thru /8 x 1/2 ODF R 90 ngle Inlet 1/2 x 5/8 ODF R Straight Thru 1/2 x 7/8 ODF R Straight Thru SQ & SQE Only /8 x 1/2 ODF R 90 ngle Inlet NET SHIPPING 1 1-1/2

22 t TYPE Q & Q ULLETIN F Refrigerants 22, 14a, 404, 410*, 507 SE Flare & Extended ODF Solder onnections * Q, EQ, SQ, and Q are not approved f R-410 applications. TYPE QE TYPE QE 1.94 QE & QE DIMENSIONS ONNETIONS - Inches 1.94 FITTING SIZE 1/4 SE.9 Inlet P/N /8 SE Inlet P/N /4 SE, 90 ngle /8 SE, 90 ngle /8 SE /2 SE 1.80 Top View 60 1/4 SE.9 Inlet P/N /8 SE Inlet P/N TYPE EQE TYPE EQE /8 ODF Insert P/N /2 ODF Insert P/N /8 ODF Insert P/N /2 ODF Insert P/N EQE & EQE DIMENSIONS ONNETIONS - Inches FITTING SIZE Top View 60 / / / / TYPE SQE TYPE SQE Removable P/N Top View 60 Removable P/N UL SIZES - Inches HRGES 22 14a OD x OD x.00 Z & ZP Series 0.50 OD x OD x OD x.00 P Series 0.50 OD x.00 G 0.75 OD x OD x 2.00

23 22 ULLETIN t TYPE G F Refrigerants 22, 14a, 404, 507 SE Flare onnections Splan G valve is a fged brass body, externally adjustable valve with SE flare connections. The thermostatic element is replaceable, and the inlet connection has a removable 100 mesh strainer. This valve is designed f small refrigeration systems such as refrigerated cases, coolers and freezers. In addition to refrigeration applications, the externally equalized G valve may be used f small capacity air conditioning and heat pump units. Outlet onnections 1/2 SE Mating Distributs (See ulletin 20-10) 160, 1605, 1606, 1608, 1650(R) F complete details of construction, see page 5. G SPEIFITIONS ELEMENT SIZE NO. 5, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal Q GP-1-1/2 GPE-1-1/2 1-1/2 GPE-2 2 Q Valves listed in this column NOT VILLE with MOP air conditioning charges. W The /8 SE inlet fitting has a long taper on the flare surface. /8 x 1/4 reducing flare nut will allow 1/4 OD tubing to be attached to this fitting. 1/4 SE onnection VLVE TYPE 1/4 SE.25 NOMINL PITY Tons of 1.25 THERMOSTTI HRGES VILLE TUING LENGTH Feet ONNETIONS - Inches SE Flare lue figures are standard and will be furnished unless otherwise specified. Flare INLET OUTLET GV-1/5 GVE-1/5 1/5 GV-1/ GVE-1/ 1/ GV-1/2 GVE-1/2 1/2 GV-/4 GVE-/4 /4 GV-1 GVE-1 1 GV-1-1/2 GVE-1-1/2 1-1/2 GVE-2 2 GV-2-1/2 2-1/2 GVE- GJ- GJE- GJ-1/6 GJE-1/6 1/6 GJ-1/4 GJE-1/4 1/4 GJ-1/2 GJE-1/2 1/2 GJ-1 GJE-1 1 GJ-1-1/2 GJE-1-1/2 1-1/2 GJE-2 2 GS- GSE- GS-1/6 GSE-1/6 1/6 GS-1/4 GSE-1/4 1/4 GS-1/2 GSE-1/2 1/2 GS-1 GSE-1 1 GS-1-1/2 GSE-1-1/2 1-1/2 GSE-2 2 GP- GPE- GP-1/6 GPE-1/6 1/6 GP-1/4 GPE-1/4 1/4 GP-1/2 GPE-1/2 1/2 GP-1 GPE-1 1 Refer to Recommended Thermostatic harges on page 5 1/4 /8 W 1/4 /8 W /8 W 1/4 /8 W 1/4 /8 W /8 W 1/4 /8 W 1/4 /8 W /8 W 1/4 /8 W 1/4 /8 W /8 W Removable P/N NET SHIPPING 1/ with external equalizer 1.68 DIMENSIONS UL SIZES - Inches Top View 1.44 HRGES 22 14a OD x.50 Z & ZP Series 0.50 OD x OD x.50 X 0.75 OD x OD x 4.00 P Series 0.50 OD x.50 VG 0.75 OD x /4 SE Inlet P/N Diameter of X harge Diaphragm ase is.62.06

24 t TYPE EG ULLETIN F Refrigerants 22, 14a, 404, 507 ODF Solder onnections Splan EG valve is a fged brass body, externally adjustable valve with ODF solder connections. The thermostatic element is replaceable, and the inlet connection has a removable 100 mesh strainer which can be cleaned and/ replaced without removing the valve from the line. This valve is designed f small refrigeration systems such as refrigerated cases, coolers and freezers. In addition to refrigeration applications, the externally equalized EG valve may be used f small capacity air conditioning and heat pump units. Outlet onnections 1/2 ODF Mating Distributs (See ulletin 20-10) D260, D262 SPEIFITIONS ELEMENT SIZE NO. 5, KNIFE EDGE JOINT F complete details of construction, see page 5. EG Replaceable U.S. Patent No. 5,22,015 (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal Q EGPE-2 2 Q Valves listed in this column NOT VILLE with MOP air conditioning charges. W ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. 1/4 ODF onnection VLVE TYPE.25 NOMINL PITY Tons of 1. THERMOSTTI HRGES VILLE TUING LENGTH Feet ONNETIONS - Inches W ODF Solder lue figures are standard and will be furnished unless otherwise specified. 1/4 ODF Solder INLET OUTLET EGV-1/5 EGVE-1/5 1/5 EGV-1/ EGVE-1/ 1/ EGV-1/2 EGVE-1/2 1/2 EGV-/4 EGVE-/4 /4 EGV-1 EGVE-1 1 EGV-1-1/2 EGVE-1-1/2 1-1/2 EGVE-2 2 EGV-2-1/2 2-1/2 EGVE- EGJ- EGJE- EGJ-1/6 EGJE-1/6 1/6 EGJ-1/4 EGJE-1/4 1/4 EGJ-1/2 EGJE-1/2 1/2 EGJ-1 EGJE-1 1 EGJ-1-1/2 EGJE-1-1/2 1-1/2 EGJE-2 2 EGS- EGSE- EGS-1/6 EGSE-1/6 1/6 EGS-1/4 EGSE-1/4 1/4 EGS-1/2 EGSE-1/2 1/2 EGS-1 EGSE-1 1 EGS-1-1/2 EGSE-1-1/2 1-1/2 EGSE-2 2 EGP- EGPE- EGP-1/6 EGPE-1/6 1/6 EGP-1/4 EGPE-1/4 1/4 EGP-1/2 EGPE-1/2 1/2 EGP-1 EGPE-1 1 EGP-1-1/2 EGPE-1-1/2 1-1/2 Refer to Recommended Thermostatic harges on page NET SHIPPING 5 /8 1/2 2 *Removable P/N DIMENSIONS UL SIZES - Inches Top View HRGES 22 14a OD x.50 Z & ZP Series 0.50 OD x OD x.50 X 0.75 OD x OD x 4.00 P Series 0.50 OD x.50 VG 0.75 OD x Diameter of X harge Diaphragm ase is.62 * EG valves manufactured pri to June 1994 use a smaller inlet strainer, P/N , which has a 1/2 brass hex head. urrent EG valves use inlet strainer P/N which has a 5/8 brass hex head. These strainers are not interchangeable. The is available as a replacement part. The is no longer available..06

25 24 ULLETIN t TYPE F F Refrigerants 22, 14a, 404, 507 SE Flare onnections Splan F valve is a small brass bar body valve with SE flare connections and balanced pt construction. This valve has the same exteri dimensions as the F valve. The thermostatic element is replaceable, and the inlet connection has a removable 100 mesh strainer. The balanced pt construction makes this valve ideally suited f small capacity refrigeration applications which operate over widely varying operating conditions. Outlet onnections 1/2 SE Mating Distributs (See ulletin 20-10) 160, 1605, 1606, 1608, 1650(R) F complete details of construction, see page 5. F SPEIFITIONS ELEMENT SIZE NO. 4, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) VLVE TYPE Internal SE Flare PORT SIZE NOMINL PITY Tons of THERMOSTTI HRGES VILLE TUING LENGTH Feet Q The /8 SE inlet fitting has a long taper on the flare surface. /8 x 1/4 reducing flare nut will allow 1/4 OD tubing to be attached to this fitting. ONNETIONS - Inches SE Flare lue figures are standard and will be furnished unless otherwise specified. INLET FV- FVE- 1/ 1/4 /8 Elbow Q FV- FVE- 1/2 2/ FV- FVE- /4 1-1/2 Z 1/4 /8 Elbow Q FV- FVE- 1-/4 ZP40 /8 Elbow FV- FVE- -1/4 5-1/2 FJ- FJE- 1/5 FJ- FJE- 1/4 1/ 1/4 /8 Elbow Q FJ- FJE- 1/2 1 1/4 /8 Elbow Q FJ- FJE- 1-1/4 1-/4 /8 Elbow FJ- FJE- 2 0 FS- FSE- 1/5 1/4 /8 Elbow Q FS- FSE- 1/4 1/ FS- FSE- 1/2 1 Z 1/4 /8 Elbow Q FS- FSE- 1-1/4 2 ZP /8 Elbow FS- FSE- 2-1/4 FP- FPE- 1/5 1/4 /8 Elbow Q FP- FPE- 1/4 1/ FP- FPE- 1/2 1 Z 1/4 /8 Elbow Q FP- FPE- 1-1/4 2 ZP /8 Elbow FP- FPE- 2-1/4 OUTLET /8 1/2 EXTERNL EQULIZER NET SHIPPING 1/ /2 DIMENSIONS ONNETIONS - Inches FITTING SIZE SE Flare 1/4 Elbow /8 Elbow /8 SE /2 SE /4 SE onnection Top View UL SIZES - Inches HRGES 22 14a OD x.00 Z & ZP Series 0.50 OD x OD x.00 1/4 SE Removable P/N /8 SE Removable P/N

26 t TYPE SF & EF ULLETIN F Refrigerants 22, 14a, 404, 507 Extended Solder onnections Splan s SF & EF are small brass bar body valves with Extended ODF solder connections and the same balanced pt construction as the F valve. oth valves have replaceable thermostatic elements. The EF has a 100 mesh insert strainer. The SF has a 100 mesh removable strainer that can be cleaned and/ replaced while the valve is still soldered to the system tubing. The balanced pt construction makes these valves ideally suited f small capacity refrigeration applications which operate over widely varying conditions. Outlet onnections 1/2 ODF, 5/8 ODF Mating Distributs (See ulletin 20-10) D260, D262, 1620, 1622, 1651(R) F complete details of construction, see page 5. SF EF SPEIFITIONS ELEMENT SIZE NO. 4, KNIFE EDGE JOINT Replaceable U.S. Patent No. 5,22,015 (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) TYPE SF Extended ODF Solder with replaceable strainer Internal TYPE EF Extended ODF Solder Internal PORT SIZE NOMINL PITY RNGE Tons of SFV- SFVE- EFV- EFVE- 1/ SFV- SFVE- EFV- EFVE- 1/2 2/ SFV- SFVE- EFV- EFVE- /4 1-1/2 SFV- SFVE- EFV- EFVE- 1-/4 SFV- SFVE- EFV- EFVE- -1/4 5-1/2 SFJ- SFJE- EFJ- EFJE- 1/5 SFJ- SFJE- EFJ- EFJE- 1/4 1/ SFJ- SFJE- EFJ- EFJE- 1/2 1 SFJ- SFJE- EFJ- EFJE- 1-1/4 1-/4 SFJ- SFJE- EFJ- EFJE- 2 SFS- SFSE- EFS- EFSE- 1/5 SFS- SFSE- EFS- EFSE- 1/4 1/ SFS- SFSE- EFS- EFSE- 1/2 thur 1 SFS- SFSE- EFS- EFSE- 1-1/4 2 SFS- SFSE- EFS- EFSE- 2-1/4 SFP- SFPE- EFP- EFPE- 1/5 SFP- SFPE- EFP- EFPE- 1/4 1/ SFP- SFPE- EFP- EFPE- 1/2 1 SFP- SFPE- EFP- EFPE- 1-1/4 2 SFP- SFPE- EFP- EFPE- 2-1/4 THERMOSTTI HRGES VILLE TUING LENGTH Inches ONNETIONS - Inches Q Extended ODF Solder lue figures are standard and will be furnished unless otherwise specified. INLET OUTLET EXTERNL EQULIZER Z ZP40 Z ZP Z ZP 0 /8 Q ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 1/2 ODF will receive 1/2 OD tubing. 1/2 5/8 1/4 Pointed Toward ottom ap Parallel to Outlet onnection NET SHIPPING 1 1-1/2

27 26 ULLETIN t TYPE SF & EF F Refrigerants 22, 14a, 404, 507 Extended Solder onnections TYPE SF 1/4 ODF onnection Removable P/N Top View DIMENSIONS ONNETIONS - Inches OUTLET FITTING SIZE 1/ / UL SIZES - Inches HRGES 22 14a OD x.00 Z & ZP Series 0.50 OD x OD x.00 TYPE EF 1/4 ODF onnection Top View 2.4 /8 ODF Insert P/N DIMENSIONS ONNETIONS - Inches OUTLET FITTING SIZE 1/ / UL SIZES - Inches HRGES 22 14a OD x.00 Z & ZP Series 0.50 OD x OD x

28 t TYPE S ULLETIN F Refrigerants 22, 14a, 404, 507 ODF Solder onnections Splan S valve is a brass bar body, externally adjustable valve with ODF solder connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. This valve is designed f both air conditioning and refrigeration applications. Outlet onnections 5/8 ODF, 7/8 ODF, 1- ODF Mating Distributs (See ulletin 20-10) 1112, 111, 1115, 1116, 1620, 1622, 1651(R), 165(R), 1655(R) F complete details of construction, see page 5. S SPEIFITIONS ELEMENT SIZE NO. 8, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal Q VLVE TYPE NOMINL PITY Tons of THERMOSTTI HRGES VILLE TUING LENGTH Feet ONNETIONS - Inches W ODF Solder lue figures are standard and will be furnished unless otherwise specified. INLET Q Valves listed in this column NOT VILLE with MOP air conditioning charges. W ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 5/8 ODF will receive 5/8 OD tubing. OUTLET SV-2 SVE-2 2 SV- SVE- /8 1/2 5/8, 7/8 1- SV-4 SVE-4 4 SV-5 SVE-5 5 1/2 5/8, 7/8 1- SVE-8 8 SVE /8 7/8 1- SJ-2 SJE-2 2 /8 1/2 5/8, 7/8 1- SJ-2-1/2 SJE-2-1/2 2-1/2 SJ- SJE- 1/2 5/8, 7/8 1- SJE-5 5 SJE /8 7/8 1- SS-2 SSE-2 2 /8 1/2 5/8, 7/8 1- SS- SSE- SS-4 SSE-4 4 1/2 5/8, 7/8 1- SSE-6 6 SSE-7 7 5/8 7/8 1- SP-2 SPE-2 2 /8 1/2 5/8, 7/8 1- SP- SPE- SP-4 SPE-4 4 1/2 5/8, 7/8 1- SPE-6 6 SPE-7 7 5/8 7/8 1- Refer to Recommended Thermostatic harges on page NET SHIPPING 2 DIMENSIONS ONNETIONS - Inches FITTING SIZE / / / / /4 ODF onnection Top View UL SIZES - Inches HRGES 22 14a OD x.50 Z & ZP Series 0.50 OD x OD x.50 X 0.75 OD x OD x 4.00 P Series 0.50 OD x.50 VG 0.75 OD x Diameter of X harge Diaphragm ase is.62

29 28 ULLETIN t TYPE ES F Refrigerants 22, 14a, 404, 507 Extended ODF Solder onnections Splan ES valve is a brass bar body valve having the same physical size as the S valve except the ES features a balanced pt construction and extended ODF connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. The balanced pt construction makes this valve ideally suited f refrigeration and air conditioning applications which operate over widely varying conditions. Outlet onnections 7/8 ODF, 1- ODF, 1-/8 ODF Mating Distributs (See ulletin 20-10) 1112, 111, 1115, 1116, 1117, 1126, 1128, 165(R), 1655(R), 1657(R) F complete details of construction, see page 5. ES SPEIFITIONS ELEMENT SIZE NO. 8, KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Q ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 5/8 ODF will receive 5/8 OD tubing. W pproved f bi-directional applications. E Minimum quantities may apply to non-standard connections. Not all connection combinations are available. * X charge not available. VLVE TYPE NOMINL PITY Tons of ESVE-8 W 8 THERMOSTTI HRGES VILLE *Refer to Recommended Thermostatic harges on page TUING LENGTH Feet INLET ONNETIONS - Inches E Q Extended ODF Solder lue figures are standard and will be furnished unless otherwise specified. OUTLET 1/2 5/8 7/8 1- ESVE-11 W 11 1/2, 5/8 7/8 7/8, 1-1-/8 ESVE /8 7/8 7/8, 1-1-/8 ESVE /8 1-1-/8 ESJE-5 W 5 1/2 5/8 7/8 1- ESJE-7 W 7 1/2, 5/8 7/8 7/8, 1-1-/8 ESJE-9 9 5/8 7/8 7/8, 1-1-/8 ESJE /8 1-1-/8 5 ESSE-6 W 6 1/2 5/8 7/8 1- ESSE-7-1/2 W 7-1/2 1/2, 5/8 7/8 7/8, 1-1-/8 ESSE /8 7/8 7/8, 1-1-/8 ESSE-1 1 7/8 1-1-/8 ESPE-6 W 6 1/2 5/8 7/8 1- ESPE-7-1/2 W 7-1/2 1/2, 5/8 7/8 7/8, 1-1-/8 ESPE /8 7/8 7/8, 1-1-/8 ESPE-1 1 7/8 1-1-/8 EXTERNL EQULIZER 1/4 Pointed Toward ottom ap Parallel to Outlet onnection NET SHIPPING 2 DIMENSIONS ONNETIONS - Inches 1/4 ODF onnection FITTING SIZE 1/ / / / Top View 1.81 UL SIZES - Inches HRGES 22 14a OD x.50 Z & ZP Series 0.50 OD x OD x.50 P Series 0.50 OD x.50 VG 0.75 OD x

30 t TYPE O ULLETIN F Refrigerants 22, 14a, 404, 410, 507 ODF Solder onnections Splan O valve is a brass bar body, externally adjustable valve with ODF solder connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. This valve type features a balanced pt construction, and it is designed f both air conditioning and refrigeration applications. synthetic seating surface provides tight shut-off during system off periods. This valve type has two body styles: a small body which provides capacities up to 0 tons R-22 and 5 tons R-410, and a large body which extends capacities to 70 tons R-22 and 60 tons R-410. Outlet onnections 1- ODF, 1-/8 ODF, 1-5/8 ODF Mating Distributs (See ulletin 20-10) 1115, 1116, 1117, 1125, 1126, 1127, 1128, 114, 1655(R), 1657(R), 1659(R) F complete details of construction, see page 5. U.S. Patent No.,742,722 O SPEIFITIONS ELEMENT SIZE NO. 8, NO., NO. 85 (R-410), ND NO. 85- (R-410), KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 410 (Z) 507 (P) 402 (L) Q ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus 5/8 ODF will receive 5/8 OD tubing. W Optional bi-directional feature is available, please contact Splan Division of Parker f me infmation. * X charge not available. VLVE TYPE NOMINL PITY Tons of OVE-15 W 15 OVE-20 W 20 OVE-0 W 0 OVE OVE OVE OJE-9 9 OJE OJE OJE-2 2 OJE-2 2 OJE OSE-9 9 OSE OSE OSE-0 0 OSE-5 5 OSE OZE-20 W 20 OZE-25 W 25 OZE-5 W 5 OZE OZE OPE-9 9 OPE OPE OPE-0 0 OPE-5 5 OPE THERMOSTTI ELEMENT SIZE NO. 8 THERMOSTTI HRGES VILLE *Refer to Recommended Thermostatic harges on page TUING LENGTH Feet 5 ONNETIONS - Inches Q ODF Solder lue figures are standard and will be furnished unless otherwise specified. INLET 7/8 OUTLET 1-1-/8 NET SHIPPING /8 1-5/ /8 1-1-/ /8 1-5/ /8 1-1-/ /8 1-5/ / / /8 1-1-/ /8 1-5/8 4 5

31 0 ULLETIN t TYPE O F Refrigerants 22, 14a, 404, 410, 507 ODF Solder onnections TYPE O with NUMER 8 and 85 ELEMENT 1/4 ODF onnection 1.40 Top View DIMENSIONS ONNETIONS - Inches STRIGHT THRU ODF SOLDER 7/ / UL SIZES - Inches HRGES 22 14a OD X OD X.50 Z & ZP Series 0.50 OD X OD X OD X.50 P Series 0.50 OD X.50 G 0.75 OD X OD X 2.00 TYPE O with NUMER and 85- ELEMENT 1/4 ODF onnection * 2.75 Top View DIMENSIONS ONNETIONS - Inches STRIGHT THRU ODF SOLDER / / UL SIZES - Inches HRGES 22 14a OD x OD x OD x OD x 4.00 Z & ZP Series 0.75 OD x OD x OD x 4.00 P Series 0.75 OD x 4.00 G 0.75 OD x OD X 2.00 *R Element.

32 t TYPE H ULLETIN F Refrigerants 22, 14a, 404, 507 ODF Solder - Flange onnections Splan H valve is a brass bar body, externally adjustable valve available with either ODF solder FPT flange connections. The thermostatic element is replaceable, and the inlet connection has a permanent 16 mesh strainer. The FPT flange connection requires the Splan K-1178 adapter kit. This valve type provides the smallest capacity TEVs with flange connections, and it is designed f both air conditioning and refrigeration applications. Outlet onnections 7/8 ODF, 1- ODF, H flange type Mating Distributs (See ulletin 20-10) 1109, 1110, 1112, 111, 1115, 1116, 1124, 1192 (aluminum), 165(R), 1655(R) F complete details of construction, see page 5. H SPEIFITIONS ELEMENT SIZE NO., KNIFE EDGE JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) Internal Q VLVE TYPE W NOMINL PITY Tons of THERMOSTTI HRGES VILLE Refer to Recommended Thermostatic harges on page TUING LENGTH Feet ONNETIONS - Inches E ODF Solder lue figures are standard and will be furnished unless otherwise specified. FLNGE RING SIZE OD x ID Inches R Q Valves listed in this column NOT VILLE with MOP air conditioning charges. W Standard onnection 1/4 SE Flare, 1/4 ODF Solder connection available on request. E ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus, 5/8 ODF will receive 5/8 OD tubing. R Kit K-1178 with two brass bushings is available f two purposes: 1) To allow the current H valve to replace obsolete s T and H with x 0.75 flange rings by mating with the smaller flange ring bushings and/ distributs. 2) To allow the H to use 1/2 FPT connections Part number and 1/2 socket weld connections Part number Order the appropriate 1/2 connections and one K-1178 per valve. INLET OUTLET HV-5-1/2 HVE-5-1/2 5-1/2 HVE-7 7 5/8 7/8 7/8 1- HVE HVE HVE /8 7/8 1- HJ- HJE- HJ-4 HJE-4 4 HJ-5 HJE-5 5 5/8 7/8 7/8 1- HJE-8 8 HJE /8 7/8 1-5 HS- HSE- HS-4 HSE-4 4 HSE-6-1/2 6-1/2 5/8 7/8 7/8 1- HSE-9 9 HSE /8 7/8 1- HP- HPE- HP-4 HPE-4 4 HPE-6-1/2 6-1/2 5/8 7/8 7/8 1- HPE-9 9 HPE /8 7/8 1- NET SHIPPING 1.25 x DIMENSIONS ONNETIONS - Inches SOLDERING USHING 1/ / / UL SIZES - Inches HRGES 22 14a OD x OD x OD x 4.00 Z & ZP Series 0.75 OD x OD x 4.00 X 0.75 OD x OD x 4.00 P Series 0.75 OD x 4.00 VG 0.75 OD x Diameter of X harge Diaphragm ase is.62

33 2 ULLETIN t TYPE M F Refrigerants 22, 14a, 404, 507 ODF Solder - Flange onnections Splan M valve is a cast bronze body, externally adjustable valve with either ODF solder FPT flange connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. This valve type provides capacities greater than the H, and it is designed f both air conditioning and refrigeration applications. Flanges f the M valve are interchangeable with the V. Outlet onnections 1- ODF, 1-/8 ODF, 1-5/8 ODF, M/V flange Mating Distributs (See ulletin 20-10) 1115, 1116, 1117, 1119, 1121, 1125, 1126, 1127, 1128, 114, 119 (aluminum), 1655(R), 1657(R), 1659(R) F complete details of construction, see page 5. M SPEIFITIONS ELEMENT SIZE NO. 6, GSKET JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) VLVE TYPE Q NOMINL PITY Tons of MVE MVE MVE-4 4 THERMOSTTI HRGES VILLE Refer to Recommended Thermostatic harges on page lue figures are standard and will be furnished unless otherwise specified. TUING LENGTH Feet W ONNETIONS - Inches E ODF Solder Flange INLET 7/8 1- MVE /8 1- MJE MJE /8 1- MJE /8 1- MSE MSE MSE /8 1- MSE-0 0 7/8 1- MPE MPE MPE /8 1- MPE-0 0 7/8 1- OUTLET 1-1-/8 1-5/8 Q Standard onnection 1/4 SE Flare. 1/4 ODF Solder connection available on request. W FPT connections also available on request; 1/2 FPT - Part Number , /4 FPT - Part Number , 1 FPT - Part Number E ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus, 7/8 ODF will receive 7/8 OD tubing..62 FLNGE RING SIZE OD x ID Inches NET SHIPPING 1.75 x DIMENSIONS ONNETIONS - Inches 2.81 SOLDERING USHING 7/ / / UL SIZES - Inches HRGES 22 14a OD x 6.00 Z & ZP Series 0.88 OD x OD x 6.00 X 0.88 OD x OD x 6.00 P Series 0.75 OD x 4.00 VG 0.75 OD x Diameter of X harge Diaphragm ase is 4.75

34 t TYPE V ULLETIN F Refrigerants 22, 14a, 404, 507 ODF Solder - Flange onnections Splan V valve is a cast bronze body, externally adjustable valve available with either ODF solder FPT flange connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. This valve features a dual pt semi-balanced design, and it is designed f both air conditioning and refrigeration applications. synthetic seating surface provides tight shut-off during system off periods. This valve provides greater capacities than the M. Flanges f the V valve are interchangeable with the M. Outlet onnections 1-/8 ODF, 1-5/8 ODF, M/V flange Mating Distributs (See ulletin 20-10) 1117, 1119, 1121, 1125, 1126, 1127, 1128, 114, 119 (aluminum), 1657(R), 1659(R) F complete details of construction, see page 5. V SPEIFITIONS ELEMENT SIZE NO. 6, GSKET JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) 404 (S) 502 (R) 408 (R) 507 (P) 402 (L) VLVE TYPE Q NOMINL PITY Tons of VVE VVE VVE VJE-5 5 VJE VJE VSE-8 8 VSE VSE VPE-8 8 VPE VPE THERMOSTTI HRGES VILLE Refer to Recommended Thermostatic harges on page lue figures are standard and will be furnished unless otherwise specified. TUING LENGTH Feet W ONNETIONS - Inches E ODF Solder Flange INLET OUTLET Q Standard onnection 1/4 SE Flare. 1/4 ODF Solder connection available on request. W FPT connections also available on request; 1/2 FPT - Part Number , /4 FPT - Part Number , 1 FPT - Part Number E ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus, 7/8 ODF will receive 7/8 OD tubing /8 1-1-/8 1-5/8 FLNGE RING SIZE OD x ID Inches NET SHIPPING 1.75 x DIMENSIONS ONNETIONS - Inches SOLDERING USHING 7/ / / UL SIZES - Inches HRGES 22 14a OD x 6.00 Z & ZP Series 0.88 OD x OD x 6.00 X 0.88 OD x OD x 6.00 P Series 0.75 OD x 4.00 VG 0.75 OD x Diameter of X harge Diaphragm ase is 4.75

35 4 ULLETIN t TYPE W F Refrigerants 22, 14a ODF Solder - Flange onnections Splan W valve is a cast bronze body, externally adjustable valve available with ODF solder flange connections. The thermostatic element is replaceable, and the inlet connection has a permanent 12 mesh strainer. This valve features a dual pt semi-balanced design, and it is designed primarily f large capacity chillers. synthetic seating surface provides tight shut-off during system off periods. This valve provides the largest capacities available f flange connection TEVs. Outlet onnections 1-/8 ODF, 1-5/8 ODF Mating Distributs (See ulletin 20-10) 1117, 1125, 1126, 1127, 1128, 114, 1657(R), 1659(R) F complete details of construction, see page 5. W SPEIFITIONS ELEMENT SIZE NO. 6 and 7, GSKET JOINT (Splan ode) 22 (V) 407 (N) 407 (V) 422D (V) 14a (J) 12 (F) 401 (X) 409 (F) VLVE TYPE Q NOMINL PITY Tons of THERMOSTTI HRGES VILLE ELEMENT SIZE NUMER WVE E 6 WVE G only 7 WJE E 6 WJE G only 7 lue figures are standard and will be furnished unless otherwise specified. TUING LENGTH Feet ONNETIONS - Inches W ODF Solder Flange INLET OUTLET Q Standard onnection 1/4 SE Flare, 1/4 ODF Solder connection available on request. W ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of cresponding OD size. Thus, 1- ODF will receive 1- OD tubing. E Refer to Recommended Thermostatic harges, page. R F 1-1/2 NPT connections, der flanges separately f M42 solenoid eg P/N 9-1. The customer must supply 5/8 diameter x 6 long bolts and 5/8 diameter nuts /8 1-5/ /8 1-5/8 2- FLNGE RING SIZE OD x ID Inches R NET SHIPPING 2.75 x * D 2.50 E Diameter olt Holes D DIMENSIONS ONNETIONS - Inches FITTING SIZE D E F / / UL SIZES - Inches ELEMENT SIZE HRGES NUMER 22 14a 0.88 OD x 6.00 Z & ZP Series 0.88 OD x 6.00 X OD x 6.00 P Series 0.75 OD x 4.00 VG 0.75 OD x 4.00 G OD x F F *Diameter of Diaphragm ase is.62 f Small W and 4.75 f Large W

36 t MTERILS & DETILS OF ONSTRUTION ULLETIN VLVE TYPE ODY SET PIN PIN RRIER PUSHROD(S) TYPE OF JOINTS ONNETIONS INLET STRINER R R rass ar rass ar rass Pt in ody rass Pt in ody Knife Edge to Metal Knife Edge to Metal hatleff, SE Flare, ODF opper Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody No No RI rass ar rass rass Knife Edge to Metal ODF opper Fittings Silver Soldered to ody No F rass ar rass rass Knife Edge to Metal SE Flare Fittings Silver Soldered to ody Removable Screen EF rass ar rass rass Knife Edge to Metal ODF opper Fittings Silver Soldered to ody Insert Q/ Q SQ/ SQ EQ/ EQ rass ar rass ar rass ar rass rass rass rass rass rass Knife Edge to Metal Knife Edge to Metal Knife Edge to Metal SE Flare Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody Extended opper Fittings Silver Soldered to ody Removable Screen Insert G EG S rass Fging rass Fging rass ar rass rass rass rass rass rass Internally Equalized: Triangular ly Equalized: Round Knife Edge to Metal Knife Edge to Metal Knife Edge to Metal SE Flare, Integral Part of rass Fged ody ODF opper Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody Removable Screen oarse Mesh Disc F SF rass ar rass ar rass rass Knife Edge to Metal Knife Edge to Metal SE Flare Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody Removable Screen EF rass ar rass Knife Edge to Metal Extended opper Fittings Silver Soldered to ody Insert ES SMLL O LRGE O H rass ar rass ar rass ar rass ar rass Pt in ody rass Pt in ody rass Pt in ody rass rass Piston With Synthetic Seating Surface rass Knife Edge to Metal Knife Edge to Metal Knife Edge t Element and ottom ap Gasket t Seal ap ODF opper Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody ODF opper Fittings Silver Soldered to ody Solder-Flange, Pipe Flange oarse Mesh Disc oarse Mesh Disc oarse Mesh Disc oarse Mesh Disc M ronze asting rass rass Gasket Solder-Flange, Pipe Flange oarse Mesh Disc V W ronze asting ronze asting Dual Pt, Seats in Valve ody ronze Piston With Synthetic Sealing Surface Gasket Gasket Solder-Flange, Pipe Flange Solder-Flange, Pipe Flange oarse Mesh Disc oarse Mesh Disc NOTE: Materials and onstruction specifications listed on this page may change without notice. ontact Splan Division of Parker f current specifications on materials and other details of construction.

37 6 ULLETIN t OEM TYPE THERMOSTTI EXPNSION VLVES In addition to the standard line of Thermostatic Expansion Valves listed in this bulletin, special valve types are also available to fill manufacturers specific requirements. Listed below are examples of valves that are supplied f quantity ders. VLVE TYPE ONNETION TYPE VLVE DESRIPTION and PPLITION TYPIL REPLEMENT TEVs I*/I * I is OSOLETE. SE Flare ODF Solder Small brass body valve available with either angle style straight through connections. I valves with straight through connections are nmally supplied non-adjustable. The I is a I valve modified to incpate balanced pt construction. The thermostatic element is not replaceable on valves manufactured pri to urrent models use a replaceable No. 4 element. Typical applications: small capacity R-22 air conditioning and heat pump systems. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ Y997-I SE Flare ODF Solder I valve modified to incpate an internal check valve and bypass tube to allow f reverse flow with heat pump applications. The valve is not adjustable. The thermostatic element is not replaceable on valves manufactured pri to urrent models use a replaceable No. 4 element. Typical applications: small capacity R-22 heat pump systems. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ Note: check valve may be required f install around the TEV to allow flow in the reverse direction. I SE Flare ODF Solder Small brass body valve available with either angle style straight through connections. I valves with straight through connections are nmally supplied non-adjustable. urrent models use a replaceable No. 4 element. This valve is available with the Rapid Pressure alancer (RP) feature f off-cycle pressure equalization. Typical applications: small capacity R-22 air conditioning and heat pump systems. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ I*/I * I is OSOLETE. SE Flare ODF Solder I/I valves modified to incpate an internal check valve to allow f reverse flow with heat pump applications. I/I valves with straight through connections are nmally supplied non-adjustable. The valve uses a replaceable No. 4 element. Typical applications: small capacity R-22 heat pump systems. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ Note: check valve may be required f install around the TEV to allow flow in the reverse direction. F SE Flare ODF Solder Small brass body valve available only with straight through connections and external adjustment. The thermostatic element is not replaceable on valves manufactured pri to urrent models use a replaceable No. 4 element. Typical applications: small capacity air conditioning and refrigeration applications where an external adjustment is desired. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ X SE Flare ODF Solder rass body valve available with either angle style straight through connections. ngle style valve is available only with SE flare connections. X valves with straight through connections are nmally supplied non-adjustable. The thermostatic element is a replaceable type, size number 5. This valve is available with the Rapid Pressure alancer (RP) feature in certain nominal capacities f off-cycle pressure equalization. Typical applications: R-22 air conditioning and heat pump systems. R, RI, G, EG, S, Q, SQ, EQ, Q, SQ, EQ FETURES NOT INLUDED IN THIS ULLETIN Special features such as non-adjustable construction similar modifications are also available f both standard and special valves when dered in reasonable quantities. utomatic (constant pressure) expansion valves are also available on special der. If you have a special valve application, contact your Splan Sales Engineer Splan Division, Parker Hannifin, 206 Lange Drive, Washington, Missouri 6090,

38 LIMTE ONTROL ccumulats O2 controls Electronic controllers Filter-driers Hand shut-off valves Heat exchangers Hose & fittings Pressure regulating valves Refrigerant distributs Safety relief valves Solenoid valves Thermostatic expansion valves EROSPE ELETROMEHNIL FILTRTION FLUID & GS HNDLING Flight control systems & components Fluid conveyance systems Fluid metering delivery & atomization devices Fuel systems & components Hydraulic systems & components Inert nitrogen generating systems Pneumatic systems & components Wheels & brakes /D drives & systems Electric actuats, gantry robots & slides Electrohydrostatic actuation systems Electromechanical actuation systems Human machine interfaces Linear mots Stepper mots, servo mots, drives & controls Structural extrusions nalytical gas generats ompressed air & gas filters ondition moniting Engine air, fuel & oil filtration & systems Hydraulic, lubrication & coolant filters Process, chemical, water & microfiltration filters Nitrogen, hydrogen & zero air generats rass fittings & valves Diagnostic equipment Fluid conveyance systems Industrial hose PTFE & PF hose, tubing & plastic fittings Quick disconnects Rubber & thermoplastic hose & couplings Tube fittings & adapters HYDRULIS Diagnostic equipment Hydraulic cylinders & accumulats Hydraulic mots & pumps Hydraulic systems Hydraulic valves & controls Power take-offs Quick disconnects Rubber & thermoplastic hose & couplings Tube fittings & adapters PNEUMTIS ir preparation rass fittings & valves Manifolds Pneumatic actuats, grippers, valves, controls & accessies Quick disconnects Rotary actuats Rubber & thermoplastic hose & couplings Structural extrusions Thermoplastic tubing & fittings Vacuum generats, cups & senss PROESS ONTROL nalytical sample conditioning products & systems Fluopolymer chemical delivery fittings, valves & pumps High purity gas delivery fittings, valves & regulats Instrumentation fittings, valves & regulats Medium pressure fittings & valves Process control manifolds SELING & SHIELDING Dynamic seals Elastomeric o-rings EMI shielding Extruded & precision-cut, fabricated elastomeric seals Homogeneous & inserted elastomeric shapes High temperature metal seals Metal & plastic retained composite seals Thermal management Parker Hannifin pation Splan Division 206 Lange Drive Washington, MO 6090 US phone fax / ulletin 10-10