Solaris Best in Class product design, inspection and manufacturing process

Transcription

1 2014 Price List Prices Effective March 1, 2014

2

3 Solaris Steam Line; Quality from Start to Kitchen Highly experienced certified manufacturing employees implement best in class manufacturing process & materials. The results are an exemplary performance year over year. Solaris products are sold through our professional dealer partners. Parts and serviced is supported thru NSC, our National Service Co-op. Solaris Best in Class product design, inspection and manufacturing process Material traceability (316 s/s type 316L), heat numbers and chemical composition spec from mills (Mill can t substitute cheaper metal) Eco-friendly, cold spun kettle forming (no heat applied to bend metal) (No inherent metal fatigue) Hold points, welding rod spec s & welding logs (high quality welding rod material, can t deviate from weldments spec and standards) QA empowerment inspection standards Best in Class (manufacturing process can be stopped by any line worker or inspector) Weld maps, trace back signatures, welder certifications (all welders sign off and accountable for work, must be constantly tested & up-dated) Documentation of process U1 certified (highest level by American Society of Mechanical Engineers, ASME certified) Reserve head heat sink on gas kettles 2/3 jacketed (3/8 thick carbon steel boiler plate, absorb heat more efficiently and saves energy) IMPORTANT WATER FILTER NOTICE: Walter filtration system (page 19) are included on all Solaris Steam generators/boiler base models purchased from the price list. The Solaris Company will enhance brand value, reduce downtime, extend equipment life cycle and reduce the total cost of ownership. Solaris Approvals All Solaris equipment has the necessary approvals for each particular product. This is a list of all approvals we use in manufacturing the equipment. Specific approvals are applied to the appropriate product, Steamer, Kettle or Tilt Skillet. ASME ASME Electrical National Board Gas National Sanitation

4 Table of Contents Products Page Prison Package Options - Solaris offers a complete prison package program for all Solaris Steam Equipment. For pricing please call Skillets Skillet Options & Accessories... 4 Kettles, Electric & Direct Steam Kettles, Electric & Direct Steam-Options & Accessories Kettles, Gas...15 Kettles, Gas-Options & Accessories Kettle Stands & Tables...17 Oyster Cookers...18 Water Filtration System...19 Steamers, Counter & Floor Steamers, Pressure & Pressureless Boiler Base Steam Units Equipment Warranty...29 Filter Warranty & Equipment Returns Product Index Product Category Page 2PHC-100-A KETTLE OPTIONS 11 2PHC-40-A KETTLE OPTIONS 11 2PHC-60-A KETTLE OPTIONS 11 2PHC-80-A KETTLE OPTIONS L-100-A KETTLE OPTIONS 12,16 316L-125-A KETTLE OPTIONS L-150-A KETTLE OPTIONS L-60F-A KETTLE OPTIONS L-60-A KETTLE OPTIONS 12,16 316L-80-A KETTLE OPTIONS 12,16 316L-80F-A KETTLE OPTIONS 12 B14-20-A CONV & PRESSURE OPTIONS 27 B14-25-A CONV & PRESSURE OPTIONS 27 B14-30-A CONV & PRESSURE OPTIONS 27 B20-25-A CONV & PRESSURE OPTIONS 27 B20-30-A CONV & PRESSURE OPTIONS 27 B24-36-A CONV & PRESSURE OPTIONS 27 B24-42-A CONV & PRESSURE OPTIONS 27 B24-48-A CONV & PRESSURE OPTIONS 27 B25-30-A CONV & PRESSURE OPTIONS 27 B36-42-A CONV & PRESSURE OPTIONS 27 B36-48-A CONV & PRESSURE OPTIONS 27 B42-48-A CONV & PRESSURE OPTIONS 27 BFT-A CONV & PRESSURE OPTIONS 27 BS-610-A WATER FILTER 19 C-100-A KETTLE OPTIONS 11 Product Category Page C-10-A KETTLE OPTIONS 11 C-12G-A KETTLES 15 C-20-A KETTLE OPTIONS 11,16 C-30-A KETTLE OPTIONS 11,16 C-40-A KETTLE OPTIONS 11,16 C-60-A KETTLE OPTIONS 11,16 C-6-A KETTLE OPTIONS 11 C-80-A KETTLE OPTIONS 11 CC5-10-A WATER FILTER 19 CC5-20-A WATER FILTER 19 CE-24-S BOILER 25 CE-324-S BOILER 25 CE-336-S BOILER 25 CE-342-S BOILER 25 CE-348-S BOILER 25 CE-36-S BOILER 25 CE-42-S BOILER 25 CE-48-S BOILER 25 CG-14-S BOILER 25 CG-20-S BOILER 25 CG-314-S BOILER 25 CG-320-S BOILER 25 CG-325-S BOILER 25 CG-330-S BOILER 25 CH-100-A KETTLE OPTIONS 11 CH-20-A KETTLE OPTIONS 16 CH-30-A KETTLE OPTIONS 16 CH-40-A KETTLE OPTIONS 11,16 CH-60-A KETTLE OPTIONS 11,16 Product Category Page CH-80-A KETTLE OPTIONS 11 CMS-100-A KETTLE OPTIONS 13 CMS-10-A KETTLE OPTIONS 13 CMS-125-A KETTLE OPTIONS 13 CMS-12-A KETTLE OPTIONS 13 CMS-150-A KETTLE OPTIONS 13 CMS-20-A KETTLE OPTIONS 13 CMS-30-A KETTLE OPTIONS 13 CMS-40-A KETTLE OPTIONS 13 CMS-60-A KETTLE OPTIONS 13 CMS-6-A KETTLE OPTIONS 13 CMS-80-A KETTLE OPTIONS 13 CR-1-A KETTLE OPTIONS 11 CS-35-A WATER FILTER 19 CSD-1-A CONV & PRESSURE OPTIONS 27 DC-10-K KETTLES 6 DC-12-K KETTLES 6 DC-20-K KETTLES 6 DC-2-S PRESSURE STEAMER 24 DC-3-S PRESSURE STEAMER 24 DC-6-K KETTLES 6 DCX-2-24-S CONV STEAMER/KETTLE 22 DCX-2-36-S CONV STEAMER/KETTLE 22 DCX S CONV STEAMER 23 DCX S CONV STEAMER 23 DCX S CONV STEAMER 23 DCX-10-6-S CONV STEAMER 23 DCX S CONV STEAMER 23 DDA-2-S PRESSURE STEAMER 24 1a

5 Product Index Product Category Page DDA-3-S PRESSURE STEAMER 24 DDO-2S-A KETTLE OPTIONS 14 DDO-2T-A KETTLE OPTIONS 14 DDO-3S-A KETTLE OPTIONS 14 DDO-3T-A KETTLE OPTIONS 14 DF-12-A KETTLE OPTIONS 4,14 DF-12EX-A KETTLE STANDS 17 DF-18-A KETTLE OPTIONS 14,16 DF-18EX-A KETTLE STANDS 17 DF-RSH-A KETTLE OPTIONS 14,16 DL-100-K KETTLES 7 DL-125-K KETTLES 7 DL-150-K KETTLES 7 DL-20F-K KETTLES 7 DL-20-K KETTLES 7 DL-30F-K KETTLES 7 DL-30-K KETTLES 7 DL-40F-K KETTLES 7 DL-40-K KETTLES 7 DL-60F-K KETTLES 7 DL-60-K KETTLES 7 DL-80F-K KETTLES 7 DL-80-K KETTLES 7 DLT-100-K KETTLES 8 DLT-20F-K KETTLES 8 DLT-20-K KETTLES 8 DLT-30F-K KETTLES 8 DLT-30-K KETTLES 8 DLT-40F-K KETTLES 8 DLT-40-K KETTLES 8 DLT-60F-K KETTLES 8 DLT-60-K KETTLES 8 DLT-80-K KETTLES 8 DMF-12R-A KETTLE STANDS 17 DMF-18R-A KETTLE STANDS 17 DMF-6R-A KETTLE STANDS 17 DMS-30-K KETTLES 10 DMS-40-K KETTLES 10 DMS-60-K KETTLES 10 DMT K KETTLES 9 DMT-10-K KETTLES 9 DMT-30-K KETTLES 10 DMT-40-K KETTLES 10 DMT-60-K KETTLES 10 DMT-6-6-K KETTLES 9 DMT-6-K KETTLES 9 DP-100-K KETTLES 6 DP-20F-K KETTLES 7 DP-20-K KETTLES 6 DP-30F-K KETTLES 7 DP-30-K KETTLES 6 DP-40F-K KETTLES 7 DP-40-K KETTLES 6 DP-60F-K KETTLES 7 DP-60-K KETTLES 6 DP-80F-K KETTLES 7 DP-80-K KETTLES 6 DPA-1-A CONV & PRESSURE OPTIONS 27 Product Category Page DP-KF-A KETTLE OPTIONS 14,16 DP-SH-A CONV & PRESSURE OPTIONS 14 DP-SH-A KETTLE OPTIONS 4,16,27 DPT-20-K KETTLES 8 DPT-30-K KETTLES 8 DPT-40-K KETTLES 8 DPT-60-K KETTLES 8 DPT-80-K KETTLES 8 DSIK-1-A KETTLE STANDS 17 DSIK-2-A KETTLE STANDS 17 EBVS-1-A CONV & PRESSURE OPTIONS 27 EBVS-2-A CONV & PRESSURE OPTIONS 27 EBVS-3-A CONV & PRESSURE OPTIONS 27 EC-6TW-K KETTLES 5 EC-10TW-K KETTLES 5 EC-12TW-K KETTLES 5 EC-20TW-K KETTLES 5 EC-2-S PRESSURE STEAMER 24 EC-3-S PRESSURE STEAMER 24 ECTRS-16-B SKILLET 2 ECTS-12-B SKILLET 2 ECX-2-24-S CONV STEAMER/KETTLE 22 ECX-2-36-S CONV STEAMER/KETTLE 22 ECX S CONV STEAMER 23 ECX S CONV STEAMER 23 ECX S CONV STEAMER 23 ECX-10-6-S CONV STEAMER 23 ECX S CONV STEAMER 23 ECX-2-36-S CONVECTION STEAMER 26 EDA-2-S PRESSURE STEAMER 24 EDA-3-S PRESSURE STEAMER 24 EI-1-A CONV & PRESSURE OPTIONS 27 EK-24-A KETTLE OPTIONS 13 EK-33-A KETTLE OPTIONS 13 EKVS-1-A KETTLE OPTIONS 13 EKVS-2-A KETTLE OPTIONS 13 EKVS-3-A KETTLE OPTIONS 13 EL-20F-K KETTLES 5 EL-20-K KETTLES 5 EL-30F-K KETTLES 5 EL-30-K KETTLES 5 EL-40F-K KETTLES 5 EL-40-K KETTLES 5 EL-60F-K KETTLES 5 EL-60-K KETTLES 5 EL-80-K KETTLES 5 ELT-100-K KETTLES 6 ELT-20-K KETTLES 6 ELT-30-K KETTLES 6 ELT-40-K KETTLES 6 ELT-60-K KETTLES 6 ELT-80-K KETTLES 6 ELTS-30-B SKILLET 3 ELTS-40-B SKILLET 3 EMT K KETTLES 9 EMT-10-6-K KETTLES 9 EMT-10-K KETTLES 9 EMT-6-K KETTLES 9 EMTS-30-B SKILLET 3 Product Category Page EMTS-40-B SKILLET 3 EP-100-K KETTLES 5 EP-20-K KETTLES 5 EP-30-K KETTLES 5 EP-40-K KETTLES 5 EP-60-K KETTLES 5 EP-80-K KETTLES 5 EPX-3-S CONVECTION STEAMER 20 EPX-5-S CONVECTION STEAMER 20 ES-30-B SKILLET 2 ES-40-B SKILLET 2 ESVS-1-A SKILLET OPTIONS 4 ESVS-2-A SKILLET OPTIONS 4 ESVS-3-A SKILLET OPTIONS 4 ETS-30-B SKILLET 3 ETS-40-B SKILLET 3 GC-12-K KETTLES 15 GC-2-S PRESSURE STEAMER 24 GC-3-S PRESSURE STEAMER 24 GCX-2-24-S CONV STEAMER/KETTLE 22 GCX-2-36-S CONV STEAMER/KETTLE 22 GCX-2-44-S CONV STEAMER/KETTLE 22 GCX S CONV STEAMER 23 GCX S CONV STEAMER 23 GCX-10-6-S CONV STEAMER 23 GCX S CONV STEAMER 23 GCX S CONV STEAMER 23 GDA-2-S PRESSURE STEAMER 24 GDA-3-S PRESSURE STEAMER 24 GKVS-1-A KETTLE OPTIONS 16 GL-100E-K KETTLES 15 GL-20E-K KETTLES 15 GL-30E-K KETTLES 15 GL-40E-K KETTLES 15 GL-60E-K KETTLES 15 GL-80E-K KETTLES 15 GLT-20-K KETTLES 15 GLT-30-K KETTLES 15 GLT-40F-K KETTLES 15 GLT-40-K KETTLES 15 GLT-60-K KETTLES 15 GLTS-30-B SKILLET 3 GLTS-40-B SKILLET 3 GM-100-A KETTLE OPTIONS 13 GM-10-A KETTLE OPTIONS 13 GM-125-A KETTLE OPTIONS 13 GM-12-A KETTLE OPTIONS 13 GM-150-A KETTLE OPTIONS 13 GM-20-A KETTLE OPTIONS 13 GM-30-A KETTLE OPTIONS 13 GM-40-A KETTLE OPTIONS 13 GM-60-A KETTLE OPTIONS 13 GM-6-A KETTLE OPTIONS 13 GM-80-A KETTLE OPTIONS 13 GMS-12-A SKILLET OPTIONS 4 GMS-16-A SKILLET OPTIONS 4 GMS-30-A SKILLET OPTIONS 4 GMS-40-A SKILLET OPTIONS 4 GMT K KETTLES 9 1b

6 Product Index Product Category Page GMT-10-6-K KETTLES 9 GMT-10-K KETTLES 9 GMT-6-K KETTLES 9 GMTS-30-B SKILLET 3 GMTS-40-B SKILLET 3 GS-30-B SKILLET 2 GS-40-B SKILLET 2 GSVS-1-A SKILLET OPTIONS 4 GSX-10HE-S CONVECTION STEAMER 21 GSX-16HE-S CONVECTION STEAMER 21 GSX-7HE-S CONVECTION STEAMER 21 GTS-30-B SKILLET 3 GTS-40-B SKILLET 3 HP-50-A KETTLE OPTIONS 8 KB-A KETTLE OPTIONS 14 KOL-1 PRISON OPTIONS 28 KT-26-A KETTLE STANDS 17 KT-40-A KETTLE STANDS 17 KT-50-A KETTLE STANDS 17 KT-64-A KETTLE STANDS 17 KT-72-A KETTLE STANDS 17 KT-80-A KETTLE STANDS 17 LCT-A CONV & PRESSURE OPTIONS 27 LM-114-A KETTLE OPTIONS 13 LM-151-A KETTLE OPTIONS 13 LM-18-A KETTLE STANDS 17 LM-227-A KETTLE OPTIONS 13 LM-23-A KETTLE OPTIONS 13 LM-24-A KETTLE STANDS 17 LM-303-A KETTLE OPTIONS 13 LM-36-A KETTLE STANDS 17 LM-379-A KETTLE OPTIONS 13 LM-38-A KETTLE OPTIONS 13 LM-45-A KETTLE OPTIONS 13 LM-474-A KETTLE OPTIONS 13 LM-568-A KETTLE OPTIONS 13 LM-76-A KETTLE OPTIONS 13 OB G-K OYSTER COOKERS 18 OB G-K OYSTER COOKERS 18 OB E-K OYSTER COOKERS 18 OB G-K OYSTER COOKERS 18 OB E-K OYSTER COOKERS 18 OB G-K OYSTER COOKERS 18 PC-1-A SKILLET OPTIONS 4 PC-3-A SKILLET OPTIONS 4 PC-4-A KETTLE OPTIONS 12 PRV-A CONV & PRESSURE OPTIONS 27 PS-12-A SKILLET OPTIONS 4 RL-28-A CONVECTION STEAMER 20 RL-28G-A CONVECTION STEAMER 20 RL-28X-A CONVECTION STEAMER 20 RL-34-A CONVECTION STEAMER 20 S-24-A KETTLE STANDS 17 S-30-A KETTLE STANDS 4 S-30-A SKILLET OPTIONS 17 S75-10-A CONVECTION STEAMER 20 SA-1-A KETTLE OPTIONS 11,16 SC-12-A SKILLET OPTIONS 4 Product Category Page SC-16-A SKILLET OPTIONS 4 SC-2-S PRESSURE STEAMER 24 SC-3-S PRESSURE STEAMER 24 SCDA-2-S PRESSURE STEAMER 24 SCDA-3-S PRESSURE STEAMER 24 SCK-1-A SKILLET OPTIONS 4 SCX-2-24-S CONV STEAMER/KETTLE 22 SCX-2-36-S CONV STEAMER/KETTLE 22 SCX-2-44-S CONV STEAMER/KETTLE 22 SCX S CONV STEAMER 23 SCX S CONV STEAMER 23 SCX S CONV STEAMER 23 SCX-10-6-S CONV STEAMER 23 SCX S CONV STEAMER 23 SCX-2-6-S CONV STEAMER/KETTLE 22 SD-24-A KETTLE STANDS 17 SD-30-12G-A KETTLES 15 SD A SKILLET OPTIONS 4 SD-30-A KETTLE STANDS 4,17 SEPG-1-A CONVECTION STEAMER 21 SEVS-1-A CONVECTION STEAMER 21 SEVS-2-A CONVECTION STEAMER 21 SEVS-3-A CONVECTION STEAMER 21 SF-12-A KETTLE OPTIONS 4,14 SF-12EX-A KETTLE STANDS 17 SF-18-A KETTLE OPTIONS 14,16 SF-RSH-A KETTLE OPTIONS 14,16 SGVS-1-A CONVECTION STEAMER 20 SGVS-1-A CONVECTION STEAMER 21 SGVS-2-A CONVECTION STEAMER 21 SH-1-A KETTLE OPTIONS 14 SIP-2-A CONVECTION STEAMER 20 SK-1-A CONVECTION STEAMER 20 SPE-1-A SKILLET OPTIONS 4 SPI-12-A SKILLET OPTIONS 4 SPI-16-A SKILLET OPTIONS 4 SPI-30-A SKILLET OPTIONS 4 SPI-40-A SKILLET OPTIONS 4 SP-KF-A KETTLE OPTIONS 14,16 SP-SH-A CONV & PRESSURE OPTIONS 14,27 SP-SH-A KETTLE OPTIONS 4,16 SS-10-A WATER FILTER 19 SSB-10-A KETTLE OPTIONS 11 SSB-20-A KETTLE OPTIONS 11 SSB-6-A KETTLE OPTIONS 11 SSL-4-A CONVECTION STEAMER 20 STA-1-A KETTLE OPTIONS 12 STA-2-A KETTLE OPTIONS 12 STA-3-A KETTLE OPTIONS 12 STA-4-A KETTLE OPTIONS 12 STOK-A CONV & PRESSURE OPTIONS 27 SWL-1-A CONV & PRESSURE OPTIONS 27 SX-34EC-S CONVECTION STEAMER 21 SX-34GC-S CONVECTION STEAMER 21 SX-3-S CONVECTION STEAMER 20 SX-55EC-S CONVECTION STEAMER 21 SX-55GC-S CONVECTION STEAMER 21 SX-5G-S CONVECTION STEAMER 20 Product Category Page SX-5-S CONVECTION STEAMER 20 TBA-100-A KETTLE OPTIONS 12 TBA-100G-A KETTLE OPTIONS 12 TBA-20-A KETTLE OPTIONS 12 TBA-20G-A KETTLE OPTIONS 12 TBA-30-A KETTLE OPTIONS 12 TBA-30G-A KETTLE OPTIONS 12 TBA-40-A KETTLE OPTIONS 12 TBA-40G-A KETTLE OPTIONS 12 TBA-60-A KETTLE OPTIONS 12 TBA-60G-A KETTLE OPTIONS 12 TBA-80-A KETTLE OPTIONS 12 TBA-80G-A KETTLE OPTIONS 12 TKS A KETTLE OPTIONS 14 TKS-20-A KETTLE OPTIONS 14 TKS-20G-A KETTLE OPTIONS 14 TKS-30-A KETTLE OPTIONS 14 TKS-30G-a KETTLE OPTIONS 14 TKS-40-A KETTLE OPTIONS 14 TKS-40G-A KETTLE OPTIONS 14 TKS-60-A KETTLE OPTIONS 14 TKS-60G-A KETTLE OPTIONS 14 TKS-6-A KETTLE OPTIONS 14 TKS-80-A KETTLE OPTIONS 14 TOC-1-K OYSTER COOKERS 18 TOC-2-K OYSTER COOKERS 18 TPS-1"/2"/3"-a KETTLE OPTIONS 16 TPS-1-A KETTLE OPTIONS 14 TPS-2-a KETTLE OPTIONS 14 TPS-3-A KETTLE OPTIONS 14 TSS-1"/2"/3"-A KETTLE OPTIONS 16 TSS-1-A KETTLE OPTIONS 14 TSS-2-A KETTLE OPTIONS 14 TSS-3-A KETTLE OPTIONS 14 TVS-3-A KETTLE OPTIONS 14,16 TVT-1-A KETTLE OPTIONS 14,16 TVT-1BP-A SKILLET OPTIONS 4 TVT-2-A KETTLE OPTIONS 14,16 TVT-2BP-A SKILLET OPTIONS 4 TVT-3-A KETTLE OPTIONS 14,16 YS-1-A CONV & PRESSURE OPTIONS 27 1c

7 Braising Pans and Skillets Electric Counter Tilting Skillets ECTS-12-B kw $ 14,214 Electric Counter Tilting Skillets Manual Tilt - Gas with Electronic Ignition, Tilt Lock Feature Included ECTRS-16-B kw $ 17,287 shown with optional SD stand Electric & Gas Floor Tilting Skillets Manual Tilt - Gas with Electronic Ignition, Pour Strainer, 4 Vent Port and Spring Assist Cover. *Casters not available for these units. ES-30-B kw $ 28,717 ES-40-B kw $ 31,375 GS-30-B ,000 BTU $ 33,895 GS-40-B ,000 BTU $ 37,575 2

8 Braising Pans and Skillets Electric & Gas Tilting Skillets with Twin Console Manual Tilt, Pour Strainer, 4 Vent Port and Spring Assist Cover - Gas with Electronic Ignition ETS-30-B kw $ 25,199 ETS-40-B kw $ 30,035 GTS-30-B ,000 BTU $ 34,726 GTS-40-B ,000 BTU $ 38,522 Electric & Gas Tilting Skillets Electric Tilt, Pour Strainer, Pan Support, 4 Vent Port and Spring Assist Cover- Gas with Electronic Ignition. *casters not available for these units. ELTS-30-B kw $ 28,308 ELTS-40-B kw $ 30,930 GLTS-30-B ,000 BTU $ 35,875 GLTS-40-B ,000 BTU $ 38,149 Electric & Gas Tilting Skillets Hydraulic Tilt, Pour Strainer, 4 Vent Port, and Spring Assist Cover - Gas with Electronic Ignition EMTS-30-B kw $ 34,318 EMTS-40-B kw $ 38,891 GMTS-30-B ,000 BTU $ 39,672 GMTS-40-B ,000 BTU $ 44,265 3

9 Braising Pans and Skillets Options and Accessories (when ordered with original equipment) Countertop Options and Accessories (ECTS-12, ECTRS-16) Item Description SC-12-A Stainless Steel Lift-Off Cover for ECTS-12 $ 902 SC-16-A Stainless Steel Lift-Off Cover for ECTRS-16 $ 570 SPI-12-A Steam Pan Insert for ECTS-12 $ 1,044 SPI-16-A Steam Pan Insert for ECTRS-16 $ 988 SF-12-A 12 Single Pantry Faucet, includes bracket $ 786 DF-12-A 12 Double Pantry Faucet for ECTRS-12, includes bracket $ 1,124 PS-12-A Stainless Steel Perforated Strainer for ECTS-12 $ 665 S-30-A Stainless Steel Stand with Sliding Tray $ 3,534 SD-30-A Stainless Steel Stand with Sliding Pan $ 3,821 SD A Stainless Steel Stand with Sliding Drawer for ECTRS-16 $ 3,983 GMS-12-A Etched Gallon Markings for ECTS-12 -for liters, Item No. LMS-45 $ 671 GMS-16-A Etched Gallon Markings for ECTRS-16 -for liters, Item No. LMS-61 $ 671 ESVS-1-A 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,689 ESVS-2-A 440, 460 or 480 Volts, 3 Phase, 60 Hz (specify) $ 1,689 ESVS-3-A 575 or 600 Volts, 3 Phase, 60 Hz (specify) $ 2,259 GSVS or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,069 Floor Options and Accessories (ETS, GTS, ELTS, GLTS EMTS, GMTS) Item Description PC-1-A Pan Carrier for ETS-30/40, GTS-30/40 $ 1,633 PC-3-A Pan Carrier for ES-30/40, GS-30/40 $ 1,633 SPI-30-A Steam Pan Insert for ETS, GTS, ELTS, GLTS EMTS, GMTS-30 $ 1,492 SPI-40-A Steam Pan Insert for ETS, GTS, ELTS, GLTS EMTS, GMTS-40 $ 1,699 SF-12-A 12 Single Pantry Faucet, includes bracket $ 786 DF-12-A 12 Double Pantry Faucet, includes bracket $ 1,124 SP-SH-A Single Pantry Spray Hose Assembly with Bracket $ 2,269 DP-SH-A Double Pantry Spray Hose Assembly with Bracket $ 2,823 TVT-1BP-A 1 1/2 Tangent Draw-Off Valve with Strainer $ 2,042 TVT-2BP-A 2 Tangent Draw-Off Valve with Strainer $ 3,010 GMS-30-A Etched Gallon Markings for liters, Item No. LMS-114 $ 671 GMS-40-A Etched Gallon Markings for liters, Item No. LMS-151 $ 671 SCK-1-A 4 All Swivel Casters, 2 with Foot Brakes - set of 4 (ETS/GTS) $ 1,598 SPE-1-A 3 Stainless Steel Plumbing Enclosures $ 1,366 ESVS-1-A 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,689 ESVS-2-A 440, 460 or 480 Volts, 3 Phase, 60 Hz (specify) $ 1,689 ESVS-3-A 575 or 600 Volts, 3 Phase, 60 Hz (specify) $ 2,259 GSVS or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,069 4

10 Electric Steam Kettles Electric Counter Tilting Kettles with Removable Elements, Type 316 Liner, 50 PSI EC-6TW-K kw $ 14,071 EC-10TW-K kw $ 16,264 EC-12TW-K kw $ 18,145 EC-20TW-K kw $ 19,774 Electric Steam Kettles - Stationary Pedestal 2/3 Jacketed with Removable Elements, Hinged Cover, 50 PSI and 2 Tangent Draw-off. EP-20/30/40 with type 316 liner. EP-60/80/100 with Spring Assist Cover. EP-20-K kw $ 19,360 EP-30-K kw $ 20,404 EP-40-K kw $ 20,630 EP-60-K kw $ 25,591 EP-80-K kw $ 33,728 EP-100-K kw $ 34,272 Electric Steam Kettles - Stationary Tri-Leg 2/3 Jacketed with Removable Elements, Hinged Cover, 50 PSI and 2 Tangent Draw-off. EL-20/30/40 with type 316 liner. EL-60/80/100 with Spring Assist Cover. EL-20-K kw $ 19,360 EL-30-K kw $ 20,404 EL-40-K kw $ 20,630 EL-60-K kw $ 25,591 EL-80-K kw $ 33,728 EL-100-K kw $ 34,272 Electric Steam Kettles - Stationary Tri-Leg Full Jacketed with Removable Elements, Spring Assist Cover, 50 PSI, and 2 Tangent Draw-off. EL-20F with type 316 liner. EL-20F-K kw $ 21,986 EL-30F-K kw $ 27,018 EL-40F-K kw $ 34,088 EL-60F-K kw $ 35,847 5

11 Electric and Direct Steam Kettles Electric Steam Kettles - Tilting Tri-Leg 2/3 Jacketed with Removable Elements. ELT-20/30/40 with type 316 liner, 50 PSI. ELT-60/80/100 with 4 legs. tri-leg shown ELT-20-K kw $ 27,371 ELT-30-K kw $ 28,656 ELT-40-K kw $ 28,823 ELT-60-K kw $ 34,938 ELT-80-K kw $ 42,309 ELT-100-K kw $ 50,612 Direct Steam Counter Tilt Kettles with type 316 liner and SCV-1 Steam Control Valve, 50 PSI. DC-6-K Direct Steam $ 7,729 DC-10-K Direct Steam $ 9,237 DC-12-K Direct Steam $ 11,440 DC-20-K Direct Steam $ 13,910 Direct Steam Kettles - Stationary Pedestal 2/3 Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DP-20/30/40 with type 316 liner. DP-60/80/100 with Spring Assist Cover. DP-20-K Direct Steam $ 10,961 DP-30-K Direct Steam $11,536 DP-40-K Direct Steam $ 13,058 DP-60-K Direct Steam $ 15,700 DP-80-K Direct Steam $ 17,989 DP-100-K Direct Steam $ 20,766 6

12 Direct Steam Kettles Direct Steam Kettles - Stationary Pedestal Full Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DP-20F with type 316 liner. DP-30/40/60F with Spring Assist Cover. DP-80F comes with Hinged Split Cover, 25 PSI. shown with optional faucet DP-20F-K Direct Steam $ 13,140 DP-30F-K Direct Steam $ 15,670 DP-40F-K Direct Steam $ 17,782 DP-60F-K Direct Steam $ 20,460 DP-80F-K Direct Steam $ 34,156 Direct Steam Kettles - Stationary Tri-Leg 2/3 Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DL-20/30/40 with type 316 liner. DP- 60/80/100 with Spring Assist Cover. DL-125/150 with 4 legs and Hinged Split Cover. *DL-125 and DL-150 are equipped with 25 PSI DL-20-K Direct Steam $ 10,905 DL-30-K Direct Steam $ 11,536 DL-40-K Direct Steam $ 12,100 DL-60-K Direct Steam $ 15,044 DL-80-K Direct Steam $ 17,237 DL-100-K Direct Steam $ 19,966 DL-125-K* Direct Steam $ 35,987 DL-150-K* Direct Steam $ 40,695 Direct Steam Kettles - Stationary Tri-Leg Full Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DL-20F with type 316 liner. DL-30/40/60F with Spring Assist Cover. DL-80F with Hinged Split Cover, 25 PSI. shown with optional faucet DL-20F-K Direct Steam $ 13,139 DL-30F-K Direct Steam $ 15,670 DL-40F-K Direct Steam $ 17,782 DL-60F-K Direct Steam $ 20,459 DL-80F-K Direct Steam $ 34,156 7

13 Direct Steam Tilt Kettles Direct Steam Kettles - Tilting Pedestal 2/3 Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DPT-20/30/40 with type 316 liner. DPT-20-K Direct Steam $ 16,219 DPT-30-K Direct Steam $ 16,935 DPT-40-K Direct Steam $ 18,130 DPT-60-K Direct Steam $ 20,575 DPT-80-K Direct Steam $ 23,877 Direct Steam Kettles - Tilting Tri-Leg 2/3 Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DLT-20/30/40 with type 316 liner. DLT-60/80/100 with 4 legs. DLT-20-K Direct Steam $ 16,219 DLT-30-K Direct Steam $ 16,935 DLT-40-K Direct Steam $ 18,079 DLT-60-K Direct Steam $ 20,575 DLT-80-K Direct Steam $ 23,877 DLT-100-K Direct Steam $ 28,641 Direct Steam Kettles - Tilting Tri-Leg Full Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DLT-20F with type 316 liner. DLT-30F/40F/60F with 4 legs. DLT-20F-K Direct Steam $ 18,624 DLT-30F-K Direct Steam $ 21,140 DLT-40F-K Direct Steam $ 24,497 DLT-60F-K Direct Steam $ 29,327 HP-50-A 50 PSI (Optional) $ 918 8

14 Steam Tilt Kettles STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Steam Kettles on 24 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-6-K Direct Steam $ 16,350 DMT-10-K Direct Steam $ 19,305 EMT-6-K kw $ 35,563 EMT-10-K kw $ 38,517 GMT-6-K ,000 BTU $ 33,375 GMT-10-K ,000 BTU $ 36,284 Steam Kettles on 36 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-6-6-K Direct Steam $ 24,074 EMT-6-6-K kw $ 41,049 GMT-6-6-K ,000 BTU $ 39,668 Steam Kettles on 42 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-10-6-K Direct Steam $ 27,432 DMT K Direct Steam $ 29,635 EMT-10-6-K kw $ 45,409 EMT K kw $ 47,592 GMT-10-6-K ,000 BTU $ 43,065 GMT K ,000 BTU $ 45,233 9

15 Modular Direct Steam Tilt and Stationary Kettles Direct Steam Tilt Kettles on Modular Base Cabinet 2/3 Jacketed, Spring Assist Cover, 2 Tangent Draw-off, 35 PSI, Hydraulic Lift, Steam Control Assembly, Swing Drain, Deck Mounted Faucet and Pan Carrier. DMT-30/40 with type 316 liner. Description Dimension WxHxD DMT-30-K 2/3 jacket, 30 gallon -36 cabinet 36 x41.5 x $ 33,294 DMT-40-K 2/3 jacket, 40 gallon -36 cabinet 36 x42.5 x $ 33,647 DMT-60-K 2/3 jacket, 60 gallon -42 cabinet 42 x47.62 x $ 36,374 Direct Steam Stationary Kettles on Modular Base Cabinet 2/3 Jacketed, Hinged Cover, 2 Tangent Draw-off, 35 PSI, Steam Control Assembly, Swing Drain and Deck Mounted Faucet. DMS-30/40 with type 316 liner. DMS-60 Comes Standard with Spring Assist Cover. Description Dimension WxHxD DMS-30-K 2/3 jacket, 30 gallon 36 x41.5 x $ 21,911 DMS-40-K 2/3 jacket, 40 gallon 36 x42.5 x $ 22,531 DMS-60-K 2/3 jacket, 60 gallon 42 x47.62 x $ 25,057 10

16 Electric and Direct Steam Kettle Options and Accessories (when ordered with original equipment) Kettle Lift Off Cover Item Description C-6-A 6 Gallon $ 429 C-10-A 10 Gallon $ 640 C-20-A 20 Gallon $ 711 C-30-A 30 Gallon $ 913 C-40-A 40 Gallon $ 1,008 C-60-A 60 Gallon $ 1,099 C-80-A 80 Gallon $ 1,260 C-100-A 100 Gallon $ 1,669 Kettle Spring Assist Cover Item Description CH-40-A 40 Gallon $ 3,116 CH-60-A 60 Gallon $ 3,222 CH-80-A 80 Gallon $ 4,064 CH-100-A 100 Gallon $ 4,790 SA-1-A Upgrade for kettle with standard yoke to spring assist $ 872 CR-1-A Add for Condensate Ring (factory installed) $ 565 Kettle Two Piece Hinged Cover (Stationary Kettles Only) Item Description 2PHC-40-A 40 Gallon $ 2,889 2PHC-60-A 60 Gallon $ 2,995 2PHC-80-A 80 Gallon $ 3,262 2PHC-100-A 100 Gallon $ 3,554 Single Perforated Stainless Steel Basket Item Description SSB-6-A 6 Gallon $ 812 SSB-10-A 10 Gallon $ 1,452 SSB-20-A 20 Gallon $ 1,452 11

17 Electric and Direct Steam Kettle Options and Accessories (when ordered with original equipment) Triple Perforated Stainless Steel Baskets Item Description TBA-20-A 20 Gallon, 2/3 Jacketed Kettle $ 3,232 TBA-30-A 30 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-40-A 40 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-60-A 60 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-80-A 80 Gallon, 2/3 Jacketed Kettle $ 4,936 TBA-100-A 100 Gallon, 2/3 Jacketed Kettle $ 4,936 Gas Kettles - Triple Perforated Stainless Steel Baskets TBA-20G-A 20 Gallon Kettle $ 3,232 TBA-30G-A 30 Gallon Kettle $ 3,348 TBA-40G-A 40 Gallon Kettle $ 3,348 TBA-60G-A 60 Gallon Kettle $ 3,348 TBA-80G-A 80 Gallon Kettle $ 4,936 TBA-100G-A 100 Gallon Kettle $ 4,936 Steam Control Options - Tilting and Stationary Direct Steam Kettle Item Description STA-1-A Steam control assembly consisting of line strainer, steam inlet globe valve and steam trap (used with DL and DP kettles) $ 1,079 STA-2-A Line strainer, steam trap (used with DLT and DPT kettles) $ 857 STA-3-A Line strainer, steam trap, safety valve (used with DC, 50 PSI) $ 1,270 STA-4-A Line strainer, steam trap, safety valve (used with TOC, 15 PSI) $ 1,270 Quick Chill System QCS-1-A For Direct Steam Kettles $ 10,693 Liner in Type 316 Stainless Steel (2/3 Jacketed) 316L-60-A 60 Gallon $ 1, L-80-A 80 Gallon $ 1, L-100-A 100 Gallon $ 1, L-125-A 125 Gallon $ 2, L-150-A 150 Gallon $ 2,002 Liner in Type 316 Stainless Steel (Full Jacketed) 316L-60F-A 60 Gallon $ 1, L-80F-A 80 Gallon $ 2,001 Pan Support - Tilting Kettles PC-4-A Gallon $ 1,875 12

18 Options and Accessories (when ordered with original equipment) Electrical Options for Kettles EKVS-1-A 380 or 415, 50 Hz, 3 Phase $ 1,034 EKVS-2-A 440, 460 or 480, 60 Hz, 3 Phase $ 1,064 EKVS-3-A 575 or 600, 60 Hz, 3 Phase $ 1,613 EK-24-A 24 kw Element for 40, 60, 80 and 100 Gallon s $ 479 EK-33-A 33 kw Element for 60, 80 and 100 Gallon s $ 1,155 Contour Measuring Strips CMS-6-A 6 Gallon Kettle $ 570 CMS-10-A 10 Gallon Kettle $ 570 CMS-12-A 12 Gallon Kettle $ 570 CMS-20-A 20 Gallon Kettle $ 570 CMS-30-A 30 Gallon Kettle $ 570 CMS-40-A 40 Gallon Kettle $ 570 CMS-60-A 60 Gallon Kettle $ 610 CMS-80-A 80 Gallon Kettle $ 610 CMS-100-A 100 Gallon Kettle $ 610 CMS-125-A 125 Gallon Kettle $ 610 CMS-150-A 150 Gallon Kettle $ 610 Etched Gallon Markings GM-6-A 6 Gallon Kettle $ 681 GM-10-A 10 Gallon Kettle $ 681 GM-12-A 12 Gallon Kettle $ 681 GM-20-A 20 Gallon Kettle $ 691 GM-30-A 30 Gallon Kettle $ 706 GM-40-A 40 Gallon Kettle $ 716 GM-60-A 60 Gallon Kettle $ 736 GM-80-A 80 Gallon Kettle $ 751 GM-100-A 100 Gallon Kettle $ 771 GM-125-A 125 Gallon Kettle $ 872 GM-150A 150 Gallon Kettle $ 973 Etched Liter Markings LM-23-A 23 Liter/6 Gallon Kettle $ 681 LM-38-A 38 Liter/10 Gallon Kettle $ 681 LM-45-A 45 Liter/12 Gallon Kettle $ 681 LM-76-A 76 Liter/20 Gallon Kettle $ 691 LM-114-A 114 Liter/30 Gallon Kettle $ 706 LM-151-A 151 Liter/40 Gallon Kettle $ 716 LM-227-A 227 Liter/60 Gallon Kettle $ 736 LM-303-A 303 Liter/80 Gallon Kettle $ 751 LM-379-A 379 Liter/100 Gallon Kettle $ 771 LM-474-A 474 Liter/125 Gallon Kettle $ 872 LM-568-A 568 Liter/150 Gallon Kettle $

19 Options and Accessories (when ordered with original equipment) Tangent Draw-Off Valve Stationary Kettles TVS-3-A 3 in lieu of standard 2 $ 3,529 Tilting Kettles TVT-1-A 1 1/2 valve added to tilting kettle $ 1,986 TVT-2-A 2 valve added to tilting kettle $ 2,879 TVT-3-A 3 valve added to tilting kettle $ 5,395 Dairy Type Draw-Off Valves DDO-2T-A 2 Dairy draw-off valve for tilting kettles POA DDO-3T-A 3 Dairy draw-off valve for tilting kettles POA DDO-2S-A 2 Dairy draw-off valve for stationary kettles POA DDO-3S-A 3 Dairy draw-off valve for stationary kettles POA Pantry Faucets with Brackets SF-12-A 12 Single pantry faucet with bracket $ 786 DF-12-A 12 Double pantry faucet with bracket $ 1,124 SF-18-A 18 Single pantry faucet with bracket $ 842 DF-18-A 18 Double pantry faucet with bracket $ 1,230 SP-KF-A Single pantry valve with kettle filler with bracket $ 2,213 DP-KF-A Dual pantry valve with kettle filler with bracket $ 2,758 SP-SH-A Single pantry valve with spray hose with bracket $ 2,269 DP-SH-A Dual pantry valve with spray hose with bracket $ 2,823 SF-RSH-A Combination single faucet and 60 spray hose assembly $ 3,050 DF-RSH-A Combination double faucet and 60 spray hose assembly $ 3,368 KB-A Bracket Only $ 217 Tangent Draw-Off Valve Strainers Perforated Stainless Steel Strainer TPS-1-A 1 1/2 tangent draw-off valve $ 378 TPS-2-A 2 tangent draw-off valve $ 378 TPS-3-A 3 tangent draw-off valve $ 378 Solid Stainless Steel Disc TSS-1-A 1 1/2 tangent draw-off valve $ 378 TSS-2-A 2 tangent draw-off valve $ 378 TSS-3-A 3 tangent draw-off valve $ 378 SH-1-A Strainer Hook $ 176 Tilting Kettle Strainers Direct Steam and Electric Kettles TKS-6-A 6 Gallon Kettle $ 1,931 TKS A Gallon Kettle $ 1,931 TKS-20-A 20 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-30-A 30 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-40-A 40 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-60-A 60 Gallon, 2/3 Jacketed Kettle $ 2,642 TKS-80-A 80 Gallon, 2/3 Jacketed Kettle $ 2,642 Gas Fired Kettles TKS-20G-A 20 Gallon $ 1,931 TKS-30G-A 30 Gallon $ 1,931 TKS-40G-A 40 Gallon $ 1,931 TKS-60G-A 60 Gallon $ 2,642 14

20 Gas Kettles Gas Steam Kettles - Floor Base with Legs 2/3 Jacketed, Electronic Ignition, 50 PSI, Tilt Clean Lock Feature and Type 316 Liner GC-12-K ,000 BTU $ 23,368 C-12G-A Stainless Steel Lift Off Cover $ 691 SD-30-12G-A Support Stand (factory installed) 34 lbs (16 kgs) $ 3,932 Gas Steam Kettles - Stationary with Legs 2/3 Jacketed with Hinged Cover, Electronic Ignition and 2 Tangent Draw-Off. GL-20/40 with Type 316 Liner, GL-60 with Spring Assist Cover, GL-80/100 with 4 legs. GL-20/30/40/60E with 50 PSI and GL-80/100E with 35 PSI GL-20E-K ,000 BTU $ 29,987 GL-30E-K ,000 BTU $ 32,816 GL-40E-K ,000 BTU $ 33,245 GL-60E-K ,000 BTU $ 34,778 GL-80E-K ,000 BTU $ 48,365 GL-100E-K ,000 BTU $ 51,096 Gas Steam Kettles - Stationary Tri-Leg Full Jacketed with Spring Assist Cover, 50 PSI, Electronic Ignition and 2 Tangent Draw-Off. GL-40F-K ,000 BTU $ 36,970 Gas Steam Kettles - Tilting Twin Console with Legs 2/3 Jacketed, Electronic Ignition, High Efficiency Burner, 50PSI, GLT-20/30/40 with Type 316 Liner GLT-20-K ,000 BTU $ 44,356 GLT-30-K ,000 BTU $ 45,606 GLT-40-K ,000 BTU $ 46,433 GLT-60-K ,000 BTU $ 52,397 Gas Steam Kettles - Tilting with Legs Full Jacketed w/ 50 PSI, Electronic Ignition and High Efficiency Burner with Type 316 Liner GLT-40F-K ,000 BTU $ 53,965 15

21 Gas Kettles Options and Accessories (when ordered with original equipment) Gas Kettle Accessories and Options Item Description TVT-1-A 1 1/2 Tangent Draw-Off Valve (GLT s) $ 1,986 TVT-2-A 2 Tangent Draw-Off Valve (GLT s) $ 2,879 TVT-3-A 3 Tangent Draw-Off Valve (GLT s) $ 5,395 TVS-3-A 3 Tangent Draw-Off Valve (GL s) $ 3,529 C-20-A Lift Off Cover (GLT-20) $ 711 C-30-A Lift Off Cover (GLT-30) $ 913 C-40-A Lift Off Cover (GLT-40) $ 1,008 C-60-A Lift Off Cover (GLT-60) $ 1,099 CH-20-A Spring Assist Hinged Cover (GLT-20) $ 2,929 CH-30-A Spring Assist Hinged Cover (GLT-30) $ 3,091 CH-40-A Spring Assist Hinged Cover (GLT-40) $ 3,116 CH-60-A Spring Assist Hinged Cover (GLT-60) $ 3,222 SA-1-A Spring Assist Hinged Cover in place of Yoke type (GL-20, GL-40) $ 872 SF-18-A Single Pantry Faucet & Bracket (GL & GLT s) $ 842 DF-18-A Double Pantry Faucet & Bracket (GL & GLT s) $ 1,230 SP-KF-A Single pantry valve with kettle filler with bracket $ 2,213 DP-KF-A Dual pantry valve with kettle filler with bracket $ 2,758 SP-SH-A Single pantry valve with spray hose with bracket $ 2,269 DP-SH-A Dual pantry valve with spray hose with bracket $ 2,823 SF-RSH-A Combination single faucet and 60 spray hose assembly $ 3,050 DF-RSH-A Combination double faucet and 60 spray hose assembly $ 3,368 GKVS-1-A 220 or 240/1/50 Volts or 60 Hz $ 1, L-60-A 60 Gallon $ 1, L-80-A 80 Gallon $ 1, L-100-A 100 Gallon $ 1,891 TPS-1 /2 /3 -A Perforated Stainless Steel Draw-Off Strainer $ 378 TSS-1 /2 /3 -A Solid Stainless Steel Draw-Off Disc $

22 Stands and Kettle Tables Stands Height in / mm Width in / mm Depth in / mm Shipping Weight (lbs) S-24-A $ 3,136 S-30-A $ 3,534 SD-24-A $ 3,686 SD-30-A $ 3,822 LM-18-A $ 6,206 LM-24-A $ 6,983 LM-36-A $ 8,178 Kettle Tables - with Sliding Tray and Drain Height in / mm Width in / mm Depth in / mm Shipping Weight (lbs) KT-26-A $ 10,058 KT-40-A $ 13,733 KT-50-A $ 14,833 KT-64-A $ 15,241 KT-72-A $ 17,601 KT-80-A $ 19,516 SF-12EX-A Single Pantry Faucet & Extension $ 1,271 DF-12EX-A Double Pantry Faucet & Extension $ 1,613 DF-18EX-A Double Panty Faucet & Extension (2EC Kettles on Stand) $ 1,724 DMF-18R-A Deck Mounted Faucet & Extension $ 1,714 DMF-12R-A Deck Mounted Faucet & Extension $ 1,820 DMF-6R-A Deck Mounted Faucet & Extension $ 1,629 DSIK-2-A Interconnect Kit First Two Kettles $ 1,906 DSIK-1-A Each Additional Kettle Addition $

23 Oyster Cooker STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Oyster Cookers - Direct Steam Table Mount with Steam Control Valve and Oyster Cooker Cover Description TOC-1-K Oyster Cooker - 1 liter $ 6,368 TOC-2-K Oyster Cooker - 2 liter $ 7,497 Oyster Bar - Electric (24 kw) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB E-K Oyster Bar - 1 liter $ 72,005 OB E-K Oyster Bar - 2 liter $ 77,138 Oyster Bar - Gas (140,000 BTU) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB G-K Oyster Bar -.52 liter $ 44,407 OB G-K Oyster Bar liter $ 44,906 Oyster Bar - Gas (140,000 BTU) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB G-K Oyster Bar - 4 liter $ 75,087 OB G-K Oyster Bar - 8 liter $ 80,693 18

24 Filtration System Water Filtration System Standard Features Twin series header configuration Drop-in style filter bowl housing Filter system header assembly installed onto formed stainless steel wall-mounting back-plate 5-micron carbon block cartridge for scale control SS-10-A ScaleStick cartridge for scale control Outlet pressure gauge pre-assembled onto header assembly Place an order for a steamer with a boiler or generator and the Water Filtration System is shipped NO CHARGE! Description CS-35-A Countertop steamer water filtration system $ 945 BS-610-A Double stacked or boiler base steamer water filtration system $ 1,040 Counter s: CS-35-A Floor s: BS-610-A * Proper filtration minimizes limescale and corrosion which will extend the life of your steamer. Replacement cartridges and ScaleSticks will usually last 4-6 months depending on water quality in your area. Periodically pressure gauge and clear ScaleStick bowl inspections will confirm replacement schedule for each cartridge and/or stick. CC5-10-A SS-10-A SS-10-A CC5-20-A Description SS-10-A ScaleStick replacement $ 163 CC5-10-A Countertop steamer replacement cartridge $ 47 each CC5-20-A Double stacked or boiler base model steamer replacement cartridge $ 73 each Filter cartridge replacement records must show scheduled 6-month & maintenance history to maintain warranty. Limited Second Year Warranty - complete details on page 30 The limited second year warranty covers these water related parts: Solenoids, probes, elements, high limit & preheat thermostats, atmospheric generator & pressure boiler shells, high limit controls. All other failed parts will be the owners responsibility. Second year warranty is limited to parts only, labor not include, as long as the prescribed preventative maintenance is followed. 19

25 Countertop 3 and 5 Pan Steamers Electric Counter Convection Steamer (Connectionless and Generatorless) 3 and 5 Pan Counter Steamers with Manual Controls,Manual Fill, Leveling Legs, type 316 liner Compartments EPX-3-S Electric kw $ 11,621 EPX-5-S Connectionless and Boilerless kw $ 12,060 RL-28X-A Stainless Steel Stand (height 28 ) for EPX only $ 1,765 S-EPXSS-A EPX Stacking Stand $ 3,131 Electric Counter Convection Steamer (with Generators) 3 and 5 Pan Counter Steamers with Manual Controls, Leveling Legs, Deliming Port and 3/8 Y-Strainer, type 316 liner and Water Filter SX-3-S SX-5-S Compartments Electric Generator with split water line Electric Generator with split water line kw $ 13, kw $ 13,729 RL-28-A Stainless Steel Stand (height 28 ) $ 1,659 RL-34-A Stainless Steel Stand (height 34 ) $ 1,997 SSL-4-A Stainless Steel 4 Legs (standard on EPX-3 and EPX-5) $ 247 SK-1-A Stacking Kit for the SX models only $ 40 S75-10-A 7.5 kw Increased to 10kW $ 343 SIP-2-A Interconnect Plumbing for 2 Units (Factory Installed) $ 902 Gas Counter Convection Steamer 5 Pan Counter Steamer with Manual Controls, Pan Guides, 4 Legs, Deliming Port, Electronic Ignition, Split Water Line, type 316 liner and Water Filter Compartments SX-5G-S 1-5 Pan ,000 BTU $ 20,938 RL-28G-A Stainless Steel Stand $ 1,976 SGVS-1-A 220/1/50 or 60 Hz Controls $ 1,069 20

26 Floor 7 and 10 PanSteamers Electric Convection Steamer On 24 Stainless Steel Cabinet or Open Leg Base, 7 & 10 Pan with Manual Controls, Pan Guides, Deliming Port, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments SX-34EC-S 2-7 Pan kw $ 27,860 SX-55EC-S 2-10 Pan kw $ 31,380 SEVS-1-A 380/3/50 or 60 Hz Controls $ 2,032 SEVS-2-A 415/3/50 or 60 Hz Controls $ 2,032 SEVS-3-A 480/3/50 or 60 Hz Controls $ 2,032 SEPG-1-A Pan Guides in Cabinet Base (SX-34EC only) $ 413 Gas Convection Steamer On 24 Stainless Steel Cabinet, 7 and 10 Pan with Manual Controls, Pan Guides, Deliming Port, Electronic Ignition, Rear Flanged Feet, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments SX-34GC-S 2-7 Pan ,000 BTU $ 34,363 SX-55GC-S 2-10 Pan ,000 BTU $ 36,637 SGVS-2A 220/1/50 or 60 Hz Controls $ 2,123 High Efficient/Energy Gas Convection Steamer On 24 Stainless Steel Cabinet, 5, 7, 10 and 16 Pan with Manual Controls, Pan Guides, Deliming Port, Electronic Ignition, Rear Flanged Feet, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments GSX-7HE-S (1) 3 Pan and (1) 4 Pan ,000 BTU $ 36,819 GSX-10HE-S (2) 5 Pan ,000 BTU $ 38,563 GSX-16HE-S* (2) 8 Pan ,000 BTU $ 48,506 SGVS-1-A 220/1/50 or 60 Hz Controls (1 compartment) $ 1,069 SGVS-2-A 220/1/50 or 60 Hz Controls (2 compartment) $ 2, * GSX-16HE standard with LCT-2 two compartment load compensating timer

27 6 Pan Convection Steamers/Kettles Auto Boiler Blowdown STANDARD Features Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Convection Steamers On 24 and 36 Stainless Steel Cabinet Base, 6 Pan, Manual Controls, and type 316 liner Compartments 24 Cabinet Base DCX-2-24-S Direct Steam $ 28,803 SCX-2-24-S Steam Coil $ 38,644 ECX-2-24-S kw $ 41,098 GCX-2-24-S ,000 BTU $ 40, Cabinet Base DCX-2-36-S Direct Steam $ 30,355 SCX-2-36-S Steam Coil $ 40,206 ECX-2-36-S kw $ 44,255 GCX-2-36-S ,000 BTU $ 44,255 Convection Steamers and 6 Gallon Steam Kettle On 44 Stainless Steel Cabinet Base, 6 Pan, Manual Controls, and type 316 liner Compartments DCX-2-6-S Direct Steam $ 43,150 SCX-2-6-S Steam Coil $ 53,930 ECX-2-6-S kw $ 54,715 GCX-2-6-S ,000 BTU $ 55,351 Convection Steamers and 10 Gallon Steam Kettle On 48 Stainless Steel Cabinet Base, 6 Pan, Manual Controls and type 316 liner Compartments DCX-2-10-S Direct Steam $ 45,928 SCX-2-10-S Steam Coil $ 56,631 ECX-2-10-S kw $ 57,518 GCX-2-10-S ,000 BTU $ 58,149 22

28 10 Pan Convection Steamers/Kettles 23 STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Convection Steamers On 24 and 36 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments 24 Cabinet Base DCX S Direct Steam $ 31,213 SCX S Steam Coil $ 41,285 ECX S kw $ 45,046 GCX S ,000 BTU $ 47, Cabinet Base DCX S Direct Steam $ 31,948 SCX S Steam Coil $ 41,860 ECX S kw $ 49,820 GCX S ,000 BTU $ 51,862 Convection Steamers and 6 Gallon Steam Kettle On 44 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments DCX-10-6-S Direct Steam $ 45,979 SCX-10-6-S Steam Coil $ 55,582 ECX-10-6-S kw $ 57,408 GCX-10-6-S ,000 BTU $ 57,407 Convection Steamers and 10 Gallon Steam Kettle On 48 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments DCX S Direct Steam $ 48,076 SCX S Steam Coil $ 57,654 ECX S kw $ 59,505 GCX S ,000 BTU $ 59,505 Convection Steamers on 36 Stainless Steel Cabinet Base 16 Pan, Standard with Manual Controls and type 316 liner DCX S Direct Steam $ 37,675 SCX S Steam Coil $ 47,612 ECX S kw $ 52,341 GCX S ,000 BTU $ 52,341

29 Pressure and Pressureless Steamers with Automatic Timers and Universal Tray Guides Auto Steam Generator Blowdown Larger Pressure Compartment Steamer with Base Description Dimension EC-2-S EC-3-S 2 Compartment with Elec. Generator -24 kw holds 12 pans 3 Compartment with Elec. Generator -24 kw holds 18 pans * standard with 208, 230, 240/60/3 GC-2-S GC-3-S 2 Compartment with Gas Boiler-200,000 BTU holds 12 pans 3 Compartment with Gas Boiler-200,000 BTU holds 18 pans * standard with 115/60/1 controls only DC-2-S DC-3-S SC-2-S SC-3-S STANDARD Features Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter 2 Compartment with Direct Steam holds 12 pans 3 Compartment with Direct Steam holds 18 pans 2 Compartment with Steam Coil holds 12 pans 3 Compartment with Steam Coil holds 18 pans Do-All Compartment Cooker On 36 Stainless Steel Cabinet Base, Cooker all Stainless Steel Standard with Automatic Timers, Universal Pan Guides 36 x55.13 x /435 $ 54, x68 x /500 $ 63, x55.13 x /500 $ 57, x68 x /531 $ 66, x55.13 x /279 $ 36, x68 x /367 $ 44, x55.13 x /340 $ 48, x68 x /446 $ 59,374 Compartments DDA-2-S Direct Steam $ 43,236 SCDA-2-S Steam Coil $ 52,452 EDA-2-S kw $ 57,695 GDA-2-S ,000 BTU $ 58,482 DDA-3-S Direct Steam $ 51,852 SCDA-3-S Steam Coil $ 61,335 EDA-3-S kw $ 66,638 GDA-3-S ,000 BTU $ 66,639 24

30 Boiler Base Steam Units STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Kettle Connection (see option STOK-pg. 27) Water Filter Boiler in 24 Cabinet Height in / mm Width in / mm Depth in / mm (lbs/kgs) CE-24-S kw 350/159 $ 22,536 CE-36-S kw 350/159 $ 24,149 CE-42-S kw 350/159 $ 25,863 CE-48-S kw 350/159 $ 26,171 CG-14-S ,000 BTU 375/170 $ 25,198 CG-20-S ,000 BTU 375/170 $ 26,998 Boiler in 36 Cabinet Height in / mm Width in / mm Depth in / mm (lbs/kgs) CE-324-S kw 390/177 $ 24,250 CE-336-S kw 415/188 $ 25,859 CE-342-S kw 415/188 $ 27,568 CE-348-S kw 475/215 $ 29,745 CG-314-S ,000 BTU 450/204 $ 26,927 CG-320-S ,000 BTU 475/215 $ 28,631 CG-325-S ,000 BTU 475/215 $ 28,757 CG-330-S ,000 BTU 475/215 $ 31,162 25

31 Guidelines for Choosing Boiler Size Available Kettle for Common Steamers Using A Steam Take-off Input Additional Kettle GCX-2-S GCX-2-36-S ECX-2-S ECX-2-36-S (voltage over 208 only) standard 140,000 BTU optional 200,000 BTU standard 140,000 BTU optional 200,000 BTU optional 250,000 BTU optional 300,000 BTU standard 24kW optional 36 kw optional 42 kw standard 24kW optional 36 kw optional 42 kw optional 48 kw 10 gallon 20 gallon 10 gallon 30 gallon 40 gallon 50 gallon N/A 30 gallon 40 gallon N/A 20 gallon 40 gallon 40 gallon Boiler Steam Output Gas BTU Input Gas lbs. per hour 140,000 BTU ,000 BTU (24 base) ,000 (36 base) ,000 BTU ,000 BTU 183 Electric kw Input 24 kw kw kw 128 Steam Coil Incoming Pressure 20 PSI PSI PSI PSI 207 Steam Requirements Kettle (Gallons) lbs. per hour* Each 6 Pan Steam Compartment 30 Each 10 Pan Steam Compartment 45 * at PSI at the kettle, use of higher steam pressures (20-50 PSI) will reduce heat up time 5-20% Direct steam kettles require a steam trap for operation. Depending on the installation, a steam trap, inlet globe valve, pressure reducing valve, line strainer, and/or ball float trap must be installed with suitable piping and plumbing fittings. These items may be ordered as an option at extra cost from Solaris or may be provided by others. Foodservice boilers have a limited steam reservoir. When multiple pieces of equipment are powered by a single boiler, each kettle or compartment should be heated sequentially, allowing the boiler to recover pressure before starting the next piece of equipment. Boiler drain lines discharge hot condensate and steam which may affect the operation of the boiler or other equipment. Drain outlets should be plumbed indirectly to a floor drain outside the confines of the boiler and away from other equipment. Remote boiler sizing requires consideration of the size, length and type of pipe used, as well as the number of bends and joints. Solaris recommends the use of a professional Foodservice consultant or mechanical engineer for remote boiler specification. 26

32 Boiler Base Steam Units Options and Accessories (when ordered with original equipment) Convection Steamer and Boiler Options and Accessories Item Description B24-36-A 24 kw increased to 36 kw $ 1,371 B24-42-A 24 kw increased to 42 kw $ 2,833 B24-48-A 24 kw increased to 48 kw (voltage over 208 only) $ 3,101 B36-42-A 36 kw increased to 42 kw $ 2,183 B36-48-A 36 kw increased to 48 kw (voltage over 208 only) $ 2,430 B42-48-A 42 kw increased to 48 kw (voltage over 208 only) $ 2,339 B14-20-A 140,000 BTU increased to 200,000 BTU $ 2,254 B14-25-A 140,000 BTU increased to 250,000 BTU $ 3,701 B14-30-A 140,000 BTU increased to 300,000 BTU $ 5,853 B20-25-A 200,000 BTU increased to 250,000 BTU $ 1,452 B20-30-A 200,000 BTU increased to 300,000 BTU $ 3,600 B25-30-A 250,000 BTU increased to 300,000 BTU $ 2,148 CSD-1-A Boiler Code $ 3,010 SP-SH-A Single Pantry Spray Hose with Bracket $ 2,269 DP-SH-A Double Pantry Spray Hose with Bracket $ 2,823 PRV-A Pressure Regulating Valve (10-40 PSI) $ 1,366 BFT-A Ball Float Trap $ 2,551 STOK-A Steam Take Off Kit $ 449 DPA-1-A Deliming Kit (not available on steam coil and with CSD-1 option) $ 771 LCT-1-A One Compartment Load Compensating Timer $ 736 LCT-2-A Two Compartment Load Compensating Timer $ 1,472 YS-1-A Water in Y-Strainer $ 166 EI-1-A Electrical Ignition for Gas Boilers $ 1,477 EBVS-1-A 380 or 415 Volts, 60Hz 3 Phase $ 1,059 EBVS-2-A 440, 460 or 480 Volts, 60 Hz 3 Phase $ 1,059 EBVS-3-A 575 or 600 Volts, 60 Hz 3 Phase $ 1,623 27