Turbosteam iron steam/spray/steam boost

Transcription

1 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 1 Upon registration with Morphy Richards (UK & ROI ony) Register onine for your 3 year guarantee. See back of this instruction book for detais. (UK and Ireand customers ony) Turbosteam iron steam/spray/steam boost Pease read and keep these instructions Getting the best from your new iron... Safety first Caution must be used when handing this appiance as it does get very hot. Aways switch off the unit and aow to coo before ceaning or storing.! To improve the ife of your new product and to ensure the ceaniness of your cothes, we strongy recommend the use of distied or demineraised water. RN40697 MUK Rev4 For competitions, product hints and tips and much more, join us onine at our bog, Facebook or Twitter pages If you have a probem or compaint, pease ca our dedicated UK based hepine before returning your product to the retaier from where it was purchased. UK Hepine: Repacement Parts: Ireand Hepine:

2 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 2 IMPORTANT SAFETY INSTRUCTIONS This appiance can be used by chidren aged from 8 years and above and persons with reduced physica, sensory or menta capabiities or ack of experience or knowedge, if they have been given supervision or instruction concerning use of the appiance in a safe way and understand the hazards invoved. Chidren sha not pay with the appiance. Ceaning and user maintenance sha not be made by chidren without supervision. Keep the iron and its cord out of reach of chidren ess than 8 years of age when it is energized or cooing down. The iron must not be eft unattended whie it is connected to the suppy mains. The pug must be removed from the socket-outet before the water reservoir is fied with water. The iron must be used and rested on a stabe surface. When pacing the iron on its hee, ensure that the surface on which the hee is paced is stabe. The iron is not to be used if it has been dropped, if there are visibe signs of damage or it is eaking. The use of any eectrica appiance requires the foowing common sense safety rues: Primariy there is danger of injury or death and secondy the danger of damage to the appiance. These are indicated in the text by the foowing two conventions: WARNING: Danger to the person! IMPORTANT: Damage to the appiance! Further safety advice can be found on page 7. 2 UK Hepine Repacement Parts Ireand Hepine

3 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 3 INSTRUCTIONS FOR USE Temperature guide Heat setting markings on the temperature dia of a Morphy Richards irons match those of the Internationa Textie Care Labeing Code Symbo (120 C Max) Coo (160 C Max) Warm (210 C Max) Hot MAX setting Contro dia positions Steam eve setting (see Variabe steam on page 5) Do not iron No steam (see Dry ironing on page 4) Low Medium / High High Fabric Ironing With water in tank Without water in tank Nyon, Acetates, synthetic fabrics Woo, Poyester mixtures Iron on wrong side, if moisture required, use damp coth (not Acetate) Dry and spray Dry ironing Cotton, Linen Rayon, Rayon mixtures Fabrics requiring this setting usuay require steam pressing. Steam/spray/steam boost COMPONENTS OF YOUR IRON Steam boost button Water spray button Variabe steam contro Fiing hoe with cap fi Spray nozze f Soepate fi Iuminated temperature contro dia f Water tank Fiing beaker (certain modes ony) For detais of other Morphy Richards products, pease see our website: 3

4 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 4 BEFORE USE NOTE: The steam faciity shoud ony be used on garments which are suitabe for ironing at the 2 and 3 dot settings. When ironing with the steam faciity at the 2 dot setting, the steam output shoud be set at the ower end of the steam range (see Variabe steam section). Texties and cothes are supposed to carry ironing instructions. If they don t, you shoud foow the Temperature guide on page 3, but be sure to test the temperature by ironing the hem of the garment or simiar discreet area first. If you turn the contro dia down from a hot setting to a cooer setting, wait unti the iron temperature has stabiised before you continue ironing. FILLING 1 Make sure that the iron is not pugged in and then set the variabe steam contro to the 0 position before fiing the iron with water. 2 Open the fi cap and pour water through the fiing hoe into the water tank, using the beaker provided (certain modes ony) or a measuring jug. 400m of water fis the tank A. After fiing, repace the fi cap. A IN HARD WATER AREAS, THE USE OF DISTILLED OR DEMINERALISED WATER IS RECOMMENDED. TEMPERATURE CONTROL Pug in the iron and switch on. Set the temperature contro dia B to the temperature required (see Temperature Guide on page 3). Begin with coo fabrics and work up to higher settings. An iron heats up quicker than it coos down so you wi save time and energy. B Your iron is fitted with a temperature indicator ight which wi switch on and off whist you are ironing. FEATURES OF YOUR IRON Temperature indicator ight The indicator ight under the contro knob shows that the iron is warming up. When the required temperature is reached, the ight wi go out and wi cyce on-off during operation. Dry ironing You can use your iron as a dry iron ony. Make sure the variabe steam contro is set to the 0 symbo. Any temperature setting may be used when dry ironing, depending on the garment. You do not need water in the tank when dry ironing. However, if you wish to use the spray feature, there must be water in the tank (see Fiing section). Never use battery topping up fuid or water containing any substances ike starch, sugar, fragrant additives or defrosted water from a refrigerator. 3 Aways pour out the remaining water after use. WARNING: When fiing your iron with tap water, aways use a fiing beaker or measuring jug. Never fi directy under the tap. 4 UK Hepine Repacement Parts Ireand Hepine

5 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 5 Spray C C The steam boost can be used whist dry ironing, providing there is water in the tank, and the temperature contro is set within the steam range. Do not use steam boost at temperatures beow the steam range shown on the contro. Press the water spray button and aim the spray of water at stubborn creases. You can do this whist dry ironing, providing there is water in the tank. When using the water spray, it may be necessary to push the button a few times to get the spray pump primed. Variabe steam Fi the iron with water as described in Fiing A, and insert the pug into the eectrica socket. NOTE: For optimum steam quaity, do not operate the steam boost more than three times in succession. Vertica steam Hod the iron in a vertica position between 1cm and 2cm away from the item F. Press the steam boost button, this wi create vertica steam. This feature is especiay usefu for removing creases from hanging cothes, curtains, wa hangings, etc. F The steam output can be varied from ow to high by siding the variabe steam contro D. D E ower steam 2 dot When using the iron at the bottom of the temperature range, the sider switch shoud be adjusted to the owest setting. The steam faciity shoud ony be used on garments which are suitabe for ironing at 2 and 3 dot settings. Steam boost E higher steam 3 dot NOTE: For optimum steam quaity, do not operate the steam boost more than three times in succession. No drip system (certain modes ony) Your iron is fitted with a no drip system which is designed to prevent water escaping from the soepate when the iron is too cod. During use, the no drip system may emit a oud cick, particuary during heat-up or whist cooing down. This is perfecty norma and indicates that the system is functioning correcty. Press the steam boost button to obtain a burst of extra steam for ironing out creases in heavy materia such as denim etc. For detais of other Morphy Richards products, pease see our website: 5

6 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 6 MAINTENANCE To cean a coated soepate In the unikey event of any man-made fibre fusing to the soepate, set the iron at the 3 dot position and pass it over a cean piece of cotton which wi draw the deposit off the surface. Do not use scouring powder or soution as this coud cause damage to the coating. To cean the exterior Aow the iron to coo and wipe over with a damp coth and mid detergent, then wipe with a dry coth. Emptying and storing When you have finished ironing, unpug your iron. Ensure that the variabe steam contro is set at the 0 position, ift up the fi cap and empty any remaining water out of the fiing hoe G. G HELPLINE If you have any difficuty with your appiance, do not hesitate to ca us. We are more ikey to be abe to hep than the store from where you bought it. Pease have the foowing information ready to enabe our staff to dea with your query quicky: Name of the product. Mode number as shown on the underside of the appiance. Seria number as shown on underside of the appiance. UK Hepine Repacement Parts Ireand Hepine WEBSITE You may aso contact us through our website, or visit the site to browse and purchase appiances, spare parts and accessories from the extensive Morphy Richards range. Do not store in the box, but in an upright position H, so that any drops of water remaining cannot eak out and discoour the soepate. H IMPORTANT: The fex can be damaged if wound too tighty around the iron after use. Make a oose oop with the fex and wrap it around the iron. The iron must be coo before winding the fex and storing on its hee. 6 UK Hepine Repacement Parts Ireand Hepine

7 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 7 IMPORTANT SAFETY INSTRUCTIONS Location Do not use outdoors or near water. Chidren Cose supervision is necessary when any appiance is used near chidren. Chidren do not understand the dangers associated with operating eectrica appiances. Persona safety WARNING: The soepate of the iron can become extremey hot and may cause burns if touched. WARNING: Burns can occur from touching hot meta parts, hot water or steam. Use caution when you turn a steam iron upside down, there may be hot water in the water tank. WARNING: To protect against the risk of eectric shock, do not put the appiance in water or in any other iquid. Do not use the vertica steam feature on cothes that are being worn. Do not eave the iron unattended whist pugged in or on an ironing board. Never aow the mains ead to over hang the work surface. The socket shoud aways be off before pugging or unpugging from the socket. Never yank the cord to disconnect from the socket, instead, grasp the pug and pu to disconnect. Do not aow the cord to touch hot surfaces. Let the iron coo competey before putting away. Loop the cord oosey around the iron before storing. The iron must not be eft unattended whie it is connected to the suppy mains. Other safety considerations Use the iron ony for its intended use. Aways disconnect the iron from the eectrica socket when fiing with water or emptying, and when not in use. If the suppy cord or grommet is damaged, it must be repaced by the manufacturer, its service agent or simiary quaified person(s) in order to avoid a hazard. Do not operate the iron with a damaged cord or grommet, or if the iron has been dropped or damaged and if there are visibe signs of damage, or if it is eaking. To avoid the risk of eectric shock, do not disassembe the iron, but teephone Morphy Richards for advice. Incorrect reassemby can cause a risk of eectric shock when the iron is used. Specia instructions If your iron does not work, check the foowing points: Has the temperature contro been set to the required temperature? Is the pug in its socket? Is the pug itsef or the socket fauty? (Check by pugging in another appiance). WARNING: When not in use, your iron shoud never be paced fat and eft on an ironing board. To prevent damage to the textie being ironed, foow the temperature guide carefuy. (Test the inside of the hem of the garment). When ironing is compete, remove the pug from the socket, empty any remaining water from the tank, and aow to coo before storage. If you drop or severey knock your iron, this coud cause interna damage even if the outside appears aright. Have it checked by a quaified eectrician. It is recommended that you use up one beaker of water by operating your iron s steam and steam boost functions before ironing any cothes as some dripping may occur whie your iron s steam system is activated. ELECTRICAL REQUIREMENTS Check that the votage on the rating pate of your appiance corresponds with your house eectricity suppy which must be A.C. (Aternating Current). If the socket outets in your home are not suitabe for the pug suppied with this appiance, the pug shoud be removed and the appropriate one fitted. WARNING: The pug removed from the mains ead, if severed, must be destroyed, as a pug with a bared fexibe cord is hazardous if engaged into a ive socket outet. Shoud the fuse in the 13 amp pug require changing, a 13 amp BS1362 fuse must be fitted. WARNING: This appiance must be earthed. For detais of other Morphy Richards products, pease see our website: 7

8 RN40697MUK Rev4_Instruction Book 08/12/ :36 Page 8 REGISTERING YOUR 3 YEAR GUARANTEE Your standard 1 year guarantee is extended for an additiona 2 years when you register the product within 28 days of purchase with Morphy Richards. If you do not register the product with Morphy Richards within 28 days, your product is guaranteed for 1 year. To vaidate your 3 year guarantee register with us onine at Or ca our customer registration ine UK: IRE: N.B. Each quaifying product needs to be registered with Morphy Richards individuay. Retaier s receipt shoud be kept as proof of purchase. Pease note that the 3 year guarantee is ony avaiabe in the UK and Ireand. Pease refer to the 1 year guarantee for more information. YOUR 1 YEAR GUARANTEE It is important to retain the retaier s receipt as proof of purchase. Stape your receipt to this back cover for future reference. Pease quote the foowing information if the product deveops a faut. These numbers can be found on the base of the product. Mode no. Seria no. A Morphy Richards products are individuay tested before eaving the factory. In the unikey event of any appiance proving to be fauty within 28 days of purchase, it shoud be returned to the pace of purchase for it to be repaced. If the faut deveops after 28 days and within 12 months of origina purchase, you shoud contact the Hepine number quoting Mode number and Seria number on the product, or write to Morphy Richards at the address shown. You may be asked to return a copy of proof of purchase. Subject to the excusions set out beow (see Excusions), the fauty appiance wi then be repaired or repaced, as appropriate, and dispatched usuay within 7 working days of receipt. If, for any reason, this item is repaced or repaired during the 1 year guarantee period, the guarantee on the new item wi be cacuated from origina purchase date. Therefore it is vita to retain your origina ti receipt or invoice to indicate the date of initia purchase. To quaify for the 1 year guarantee, the appiance must have been used according to the instructions suppied. For exampe, water shoud be emptied after each use. EXCLUSIONS Morphy Richards sha not be iabe to repace or repair the goods under the terms of the guarantee where: 1 The faut has been caused or is attributabe to accidenta use, misuse, negigent use or used contrary to the manufacturer s recommendations or where the faut has been caused by power surges or damage caused in transit. 2 The appiance has been used on a votage suppy other than that stamped on the products. 3 Repairs have been attempted by persons other than our service staff (or authorised deaer). 4 The appiance has been used for hire purposes or non domestic use. 5 The appiance is second hand. 6 Morphy Richards reserves the right not to carry out any type of servicing or repair work, under the guarantee, at its discretion. 7 Pastic fiters for a Morphy Richards kettes and coffee makers are not covered by the guarantee. 8 Batteries and damage from eakage are not covered by the guarantee. This guarantee does not confer any rights other than those expressy set out above and does not cover any caims for consequentia oss or damage. This guarantee is offered as an additiona benefit and does not affect your statutory rights as a consumer. For eectrica products sod within the European Community. At the end of the eectrica products usefu ife, it shoud not be disposed of with househod waste. Pease recyce where faciities exist. Check with your Loca Authority or retaier for recycing advice in your country. The After Saes Division Morphy Richards Ltd Mexborough, South Yorkshire, Engand, S64 8AJ Hepine (office hours) UK Spare Parts Repubic of Ireand Morphy Richards products are intended for househod use ony. RN40697 MUK Rev4 12/11 Morphy Richards has a poicy of continuous improvement in product quaity and design. The company, therefore, reserves the right to change the specification of its modes at any time. 8 UK Hepine Repacement Parts Ireand Hepine