New DVM-Pro 1.0. Release Notes for Updated Sales ver & CAD ver

Transcription

1 New DVM-Pro.0 Release Notes for Updated Sales ver & CAD ver September 208

2 0 Modification function for IDU & ODU (Sales mode). Buttons for modifying IDU & ODU have been added. 2. When modifying IDUs, select the IDUs to modify, 2 select a new IDU., and then 3 press the Modify IDU button. 3. For modifying ODU in selection window, select the ODU to modify and then 2 press the Modify ODU button. 4. If the IDUs to be modified are already connected to an ODU, the ODU selection window will pop up. 5. When modifying the IDUs or ODU, if the combination ratio exceeds the allowable range, optimized ODU should be selected. Modifying indoor units Select the indoor units to be modified. 2 Select a new indoor unit model. 3 Click the Modify IDU button Modifying a outdoor unit Select the indoor units to be modified. 2 Select a new outdoor unit in the selection window after clicking the Modify ODU button. 2

3 02 Prefix setting for the indoor & outdoor unit name (Sales mode). You can specify the prefix using the Unit Name Prefix menu on the ribbon menu. 2. If the check box (for Use IDU/ODU Prefix ) is selected, the specified user prefix name is applied. Prefix setting Click the Unit Name Prefix setting menu in the ribbon menu area at the top side. 2 Enter the prefix for the IDU/ODU name and click OK button. 2 Applying the prefix If you select the Use IDU/ODU Prefix checkbox, the prefix is applied in the indoor / outdoor unit name field. 2 When unchecking this option, Indoor for IDU name and New Outdoor for ODU name is applied.

4 03 Oil trap guide for the piping between outdoor units (Sales / CAD). When the piping length between outdoor unit and the branch joint exceeds 2m(6.56ft), the oil trap is displayed. 2. Sales mode: Oil trap is displayed by adjusting the length of each pipe between outdoor units 3. CAD mode: When drawing the outdoor units, if you enter the distance between the outdoor units, the oil trap is drawn. Sales mode When the piping length between outdoor unit and the branch joint exceeds 2m(6.56ft), the oil trap is displayed. 2 CAD mode When drawing the modular combination outdoor units, if you enter 2m(6.56ft) or more for the distance between the outdoor units in the commend window, the oil trap is drawn. (Commend window)

5 04 Design temperature setting for each indoor unit (Sales mode). The performance can be corrected by setting the design temperature for each indoor unit. 2. The design temperature and performance calculation results set for each indoor unit are provided in the load profile section in the Word format report. Design temperature setting You can set the design temperature per each indoor unit in the "Capacity correction" window. 2 You can change the design temperature of the entire group of IDUs by changing the indoor design conditions in the upper portion of the window.

6 05 Add Equipment sheet within Excel equipment list (Sales mode). Equipment list (Excel form) output has added 'Equipment' sheet. 2. The 'Equipment sheet provides the model code of the modular outdoor units. Equipment sheet Existing System sheet aggregates quantities based on single outdoor unit model code. 2 New Equipment sheet aggregates quantities based on modular combination outdoor unit model code.

7 06 Allowable pipe length between ODUs (Sales / CAD mode). The check function for allowable pipe length between modular combination outdoor units has been newly applied. Pipe length check function of modular combination outdoor units. The check function for allowable pipe length between modular combination outdoor units are applied as follows. x x 0m (32.8ft) y y 0m (32.8ft) z z 0m (32.8ft)

8 07 Other changes. When selecting a new outdoor unit, it shows a recently selected category. 2. When modifying the outdoor unit, it shows the category of the outdoor unit selected earlier. 3. One outdoor unit can connect up to 32 wall-mounted type indoor units with EEV. Provide existing or recent category of outdoor unit. 2 The check function of allowable number of wall-mounted indoor units with EEV