C E R T I F I C A T E O F C O M P L I A N C E

Transcription

1 C E R T I F I C A T E O F C O M P L I A N C E Certificate Number E Report Reference E A1542-UL Issue Date 2015-OCTOBER-14 Issued to: DELTA ELECTRONICS INC 3 TUNGYUAN RD CHUNGLI INDUSTRIAL ZONE TAOYUAN COUNTY TAIWAN This is to certify that representative samples of POWER SUPPLIES, INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT AC/DC Adapter, models ADP-120RH B, ADP-120RH D Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL and CSA C22.2 No , Information Technology Equipment - Safety - Part 1: General Requirements See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at Page 1 of 1 Created by UL Document Assembler :14:53-06:00

2 Issue Date: Page 1 of 15 Report Reference # E A1542-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL , 2nd Edition, (Information Technology Equipment - Safety - Part 1: General Requirements) CAN/CSA C22.2 No , 2nd Edition, (Information Technology Equipment - Safety - Part 1: General Requirements) Listing QQGQ, QQGQ7 (Power Supplies for Information Technology Equipment Including Electrical Business Equipment) Product: AC/DC Adapter Model: ADP-120RH B, ADP-120RH D Rating: Input: AC V, 50-60Hz, 2A; Output: 19Vdc/6.32A Applicant Name and Address: DELTA ELECTRONICS INC 3 TUNGYUAN RD CHUNGLI INDUSTRIAL ZONE TAOYUAN COUNTY TAIWAN This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow- Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. Prepared by: Patrick Tsai Reviewed by: David Chen Copyright 2015

3 Issue Date: Page 2 of 15 Report Reference # E A1542-UL Supporting Documentation The following documents located at the beginning of this Procedure supplement the requirements of this Test Report: A. Authorization - The Authorization page may include additional Factory Identification Code markings. B. Generic Inspection Instructions - i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report. ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report. iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report. Product Description Consist of electronic components mounted on PWB, housed with a plastic enclosure. There are Construction A and B in models ADP-120RH B and ADP-120RH D. See Enclosure ID 7-03 for difference details. Model Differences Model ADP-120RH D is similar to model ADP-120RH B except for model designation and trademark. Technical Considerations Equipment mobility : transportable/movable Connection to the mains : pluggable A Operating condition : continuous Access location : operator accessible Over voltage category (OVC) : OVC II Mains supply tolerance (%) or absolute mains supply values : +10%, -10% (Manufacturer declared) Tested for IT power systems : No IT testing, phase-phase voltage (V) : N/A Class of equipment : Special Application - Functional Earthing Considered current rating of protective device as part of the building installation (A) : 16 (20A for North America) Pollution degree (PD) : PD 2 IP protection class : IP X0 Altitude of operation (m) : up to 5,000m Altitude of test laboratory (m) : less than 2,000 m Mass of equipment (kg) : Approx The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer s specification of: 40 degree C

4 Issue Date: Page 3 of 15 Report Reference # E A1542-UL The means of connection to the mains supply is: Detachable power cord, Pluggable A The product is intended for use on the following power systems: TN The equipment disconnect device is considered to be: Appliance inlet The product was investigated to the following additional standards: EN : A11: A1: A12: A2:2013 (which includes all European national differences, including those specified in this test report). IEC : 2007 table A.2. The Clearances and Creepage Distances have additionally been assessed for suitability up to 5,000m elevation. The following accessible locations (with circuit/schematic designation) are within a limited current circuit: CY1 secondary The following are available from the Applicant upon request: Installation (Safety) Instructions / Manual Type MST made by Conquer Electronics Co., Ltd. was used for Fuse(F1) during the abnormal test for Model ADP-120RH B construction A; Type 5ET made by Hollyland Co. was used for Fuse(F1) during the abnormal test for Model ADP-120RH B construction B. Additional Information - The original report was modified on to include the following changes/additions: This test Report is reissued from report No.: 1. E A1542-CB-1,issued date , with CB Certificate No.DK UL, issued date , 2. E A1542-CB-Amenment-1,issued date , with CB Certificate No.DK A1- UL, issued date E A1542-CB-Amenment-2,issued date , with CB Certificate No.DK A2- UL, issued date E A1542-CB-Amenment-3,issued date , with CB Certificate No.DK A3- UL, issued date This report was deemed to reissue due to employing: Alternate Construction B: Model ADP-120RH B and upgrade standard to IEC :2005 (Second Edition); Am1: Am2: Only limited tests were necessary as below: END PRODUCT REFERENCE PAGE GENERAL GUIDELINES POWER SUPPLY REFERENCE PAGE INPUT TEST: SINGLE-PHASE , 2.1.2, ENERGY HAZARD MEASUREMENTS CAPACITANCE DISCHARGE TEST 2.2.2, 2.2.3, 2.2.4, PART SELV RELIABILITY TEST INCLUDING HAZARDOUS VOLTAGE MEASUREMENTS 2.4.1, LIMITED CURRENT CIRCUIT MEASUREMENTS 2.9.1, 2.9.2, HUMIDITY TEST DETERMINATION OF WORKING VOLTAGE - WORKING VOLTAGE MEASUREMENT TEST 3.2.6, 4.2.1, STRAIN RELIEF TEST STEADY FORCE TESTS 4.2.5, 4.2.1, PART IMPACT TEST 4.2.6, DROP TEST 4.2.7, STRESS RELIEF TEST 4.5.1, , HEATING TEST 5.1, ANNEX D TOUCH CURRENT TEST (SINGLE-PHASE; TN/TT SYSTEM) ELECTRIC STRENGTH TEST 5.3.1, 5.3.4, COMPONENT FAILURE TEST

5 Issue Date: Page 4 of 15 Report Reference # E A1542-UL , 5.3.7b, ANNEX C.1 - TRANSFORMER ABNORMAL OPERATION TEST POWER SUPPLY OUTPUT SHORT-CIRCUIT/OVERLOAD TEST Additional Standards The product fulfills the requirements of: EN : A1: A11: A12: A2:2013 Markings and instructions Clause Title Power rating - Ratings Marking or Instruction Details Ratings (voltage, frequency/dc, current) Power rating - Company identification Listee's or Recognized company's name, Trade Name, Trademark or File Number Model Power rating - Model Number Fuses - Rating Rated current and voltage and type located on or adjacent to fuse or fuseholder. Special Instructions to UL Representative Production-Line Electric Strength (Dielectric Voltage-Withstand) Test: Inspect the transformer(s) listed in table "Electric Strength Test Special Constructions" per AA1.1- (C): When the tests are conducted at other location, inspect test record and specification sheet provided by the component manufacturer. Verify the specification sheet indicates 100% routine test specified in the table be conducted at the component manufacturer.

6 Issue Date: Page 5 of 15 Report Reference # E A1542-UL Production-Line Testing Requirements Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for further information. Model ADP-120RH B, ADP- 120RH D Component Removable Parts Test probe location V rms transformer T1 N/A Primary to Secondary V dc Test Time, s Earthing Continuity Test Exemptions - This test is not required for the following models: ADP-120RH B, ADP-120RH D Electric Strength Test Exemptions - This test is not required for the following models: Electric Strength Test Component Exemptions - The following solid-state components may be disconnected from the remainder of the circuitry during the performance of this test: Sample and Test Specifics for Follow-Up Tests at UL N/A Model Component Material Test Sample(s) Test Specifics

7 Issue Date: Page 6 of 15 Report Reference # E A1542-UL TABLE: list of critical components Pass Object/part or Description Manufacturer/ trademark type/model technical data Product Category CCN(s) Required Marks of Supplement ID 1. Appliance Inlet DELTA ELECTRONICS, INC. 2. Fuse (F1) LITTELFUSE WICKMANN WERKE (for UL) Littelfuse, Inc. (for VDE), LITTELFUSE PHILIPPINES INC. (for CQC) 2a. Fuse (F1) (Alternate) EVER ISLAND ELECTRIC CO LTD & WALTER ELECTRIC, Suzhou Walter Electronic Co., Ltd. (for CQC) Dongguan Walter Electric Co., Ltd(CQC) 2b. Fuse (F1) (Alternate) BEL FUSE INC (for UL) Bel Fuse Ltd. (for VDE and CCC) Conformity SK-1024M 2.5A, 250Vac, 70 degree C AXUT2 UL 392 T3.15AL, 250Vac JDYX2 UL 2010 T3.15AL, 250Vac JDYX2 UL RST T3.15AL, 2 50Vac(ccc and VDE), 277 Vac(for UL) JDYX2 2c. Fuse (F1) (Alternate) Conquer Electronics MST T3.15AL, 250V (for VDE, CQC, JDYX2 UL Co., Ltd. UL), 300V (for UL) 2d. Fuse (F1) (Alternate) Hollyland Co 5ET T3.15AL, 250Vac JDYX2, JDYX8 UL 3. Bleeder Resistors (R1, R2) Interchangeable Interchangeable Connected in series, each 2M ohm, /4 W. 4. Capacitor (C1) Interchangeable Interchangeable 120uF, min. 420V, 105 Degree C 5. X-Capacitor (CX1 ) (Alternate) KEMET ELECTRONICS ITALIA SRL (for UL), R uF, 275Vac (For ENEC), 250Vac (For UL) 110 degree C, X2 type, Comply with IEC UL FOWX2 UL

8 Issue Date: Page 7 of 15 Report Reference # E A1542-UL a. X-Capacitor (CX1 ) (Alternate) 5b. X-Capacitor (CX1 ) (Alternate) 5c. X-Capacitor (CX1 ) (Alternate) 5d. X-Capacitor (CX1 ) (Alternate) 5e. X-Capacitor (CX1 ) (Alternate) 6. Y-Capacitors (CY1, CY2 ) (CY2 only For Construction A) KEMET ELECTRONICS CORPORATION (for IMQ), 1.ARCOTRONICS ITALIA S.P.A (for CQC), 2.3. ARCOTRONICS Industries S.r.l (for CQC) Hua JungComponents Co.,Ltd Europtronic (Taiwan) Ind. Corp. (for ENEC, VDE and CQC) EUROPTRONIC (TAIWAN) INDUSTRIAL CORP (for UL) Pilkor Electronics Co Ltd Epcos Electronic Components S A ZhuHai Sung Ho Electronics Co. Ltd.,(CQC: ; ) Murata Mfg. Co., Ltd. (for VDE, UL) Murata Manufacturing Co., Ltd. (for CQC) MKP 0.33uF 250Vac,110 degree C, X2 type, Comply with IEC MPX2 0.33uF, 275 Vac or 305 Vac (For ENEC and VDE ), 250Vac or 275Vac (for UL) 110 degree C, X2 type, Comply with IEC PCX uF, 305Vac, 110 degree C, X2 type. Comply with IEC B3292xx3xxx(UL), B3292#(VDE, CQC) 0.33uF, 250Vac(UL), 305Vac(VDE, CQC), 110 degree C, X2 type. Comply with IEC Comply with IEC CMPP 0.33uF; 275Vac/310Vac, 105 degree C; X2 type, Comply with IEC KX CY1=680pF,CY2=22pF max., 250Vac (for UL and CQC, Y1 type ), 300Vac (for VDE, Y1 Cap), 440Vac (for VDE and FOWX2 FOWX2 FOWX2 FOWX2 FOWX2, FOWX8 FOWX2 UL UL UL UL UL UL

9 Issue Date: Page 8 of 15 Report Reference # E A1542-UL a.Y-Capacitors (CY1, CY2) (Alternate) (CY2 only For Construction A) 6b.Y-Capacitors (CY1, CY2 ) (Alternate) (CY2 only For Construction A) Walsin Technology Corp. (for UL and VDE) Walsin Technology Corporation (for CQC) TDK-EPC Corporation (for VDE); TDK-EPC CORP (for UL); TDK XIAMEN CO., LTD (for CQC); TDK-EPC Corporation (for CQC) AH CD CQC, X1 Cap), Y1 type and X1 type, 125 degree C. CY1=680pF,CY2=22pF max, FOWX2 250Vac (for UL, VDE and CQC, Y1 & X1 Cap), 400Vac (for VDE and CQC, Y1 & X1 Cap), Y1 type and X1 type, 125 degree C. CY1=680pF,CY2=22pF max., FOWX2 250Vac (for UL, VDE and CQC, Y1 & X1 Cap), 400Vac (for VDE and CQC, X1 Cap), Y1 type and X1 type, 125 degree C. 7.Line Filter (FL1) (Only Interchangeable Interchangeable 130 degree C. Refer to for Construction A) enclosure 4-01 for details. 7-1.Line Filter (FL1) Interchangeable Interchangeable 130 degree C. Refer to (Only for Construction B) enclosure 4-16 for details. 8.Line Filter (FL2) (Only Interchangeable Interchangeable 130 degree C. Refer to for Construction A) enclosure 4-02 for details. 8.Line Filter (FL2) (Only Interchangeable Interchangeable 130 degree C. Refer to for Construction B) enclosure 4-17 for details. 9.Line Filter (L1) Interchangeable Interchangeable 130 degree C. Refer to enclosure 4-03 for details. 10.Line Filter (L2) (Only Interchangeable Interchangeable 130 degree C. Refer to for Construction A) enclosure 4-04 for details. 10.Line Filter (L2) (Only for Construction B) Interchangeable Interchangeable 130 degree C. Refer to enclosure 4-18 for details MOSFET (Q1 ) (Only Interchangeable Interchangeable 600V-650, A -- for Construction A) MOSFET (Q3, Q4 ) (Only for Construction B) Interchangeable Interchangeable 600V, 7~8.1A Optocoupler (For Construction A, IC35) Renesas Electronics Corporation (for PS2561DL-1, PS2561DLdti.>0.4 mm, ext. cr.>7.0mm, Int. cr.>4.0mm, 120 hours FPQU2 UL UL UL

10 Issue Date: Page 9 of 15 Report Reference # E A1542-UL (For Construction B, IC51, IC52) 12a. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12b. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12c. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12d. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12e. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) UL,VDE,S) 1xx(for CCC) thermal cycling test, 110 degree C, isolation: AC 4800V min. Humidify 120h. EVERLIGHT ELECTRONICS CO LTD(For UL), Everlight Electronics Co., Ltd(for VDE,FI) COSMO Electronics Corporation (for VDE and FI); COSMO ELECTRONICS CORP (for UL); SHARP CORP ELECTRONIC COMPONENTS AND DEVICES GROUP (for UL ) Sharp Corporation (for VDE, S) TOSHIBA CORP, SEMICONDUCTOR CO DISCRETE SEMICONDUCTOR DIV (for UL) Toshiba Corporation Semicon. Co. Discrete Div (for VDE) Toshiba Corporation Semiconductor Company (for S) Vishay Semiconductor GMBH EL816 (for UL and CQC) EL816 V (for VDE) EL816.("."=A-Z or blank or number ) (for N) K1010 (for VDE, FI and CQC), K1010X-1 (for UL) PC123 dti.>0.5mm, ext. cr.>=7.6mm, int. cr.>=6.0mm, thermal cycling test,110 degree C, isolation: AC 4800V min. Humidfy test 120h, dti.>0.4mm, ext. cr.>7.0mm, int. cr.>4.0mm, 120 hours thermal cycling test, isolation: AC 4800V min, 115 degree C,Humidify 120h. dti>0.4mm, ext>8.0mm,int cr.>4.0mm, 120 hours thermal cycling test, isolation: AC 5000V Min, 110 degree C, Humidify 120h. TLP781/TLP781F dti>0.5 mm, ext. cr. > 8.0 mm, int cr. > 5.0 mm, thermal cycling tested, isolation: AC 4800V Min, 115 degree C. VOL617AX(X=2, 3, 4)(for UL), VOL617A- X(X=2,3,4)(for CQC), Dti.>0.4mm, external Cr>8.0mm, thermal cycling tested, 110 degree C. FPQU2 FPQU2 FPQU2 FPQU2 FPQU2 UL UL UL UL UL

11 Issue Date: Page 10 of 15 Report Reference # E A1542-UL f. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12g. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) 12h. Optocoupler (For Construction A, IC35) (For Construction B, IC51, IC52) (Alternate) Vishay Semiconductor GMBH LITE-ON TECHNOLOGY CORP(for VDE, FI, UL, N, S), Lite-On Technology Corporation(for CQC) TOSHIBA CORP, SEMICONDUCTOR CO DISCRETE SEMICONDUCTOR DIV (for UL) 13. Thermistor (NTC31) THINKING ELECTRONIC INDUSTRIAL CO LTD VOL617A(1,2,3)X 001(for VDE) VOL618AX(X=2, 3, 4)(for UL), VOL618A- X(X=2,3,4)(for CQC), VOL618A(1,2,3)X 001(for VDE) LTV-816M(for UL,N,CQC),LTV- 816(for VDE) TLP785/TLP785F Dti.>0.4mm, external Cr>8.0mm, thermal cycling tested, 110 degree C. dti>0.6 mm, ext. cr.>7.0mm, int cr.>5.2mm, thermal cycling tested, isolation: min. AC 4800V, 110 degree C dti>0.4 mm, ext. cr. > 8.0 mm, int. cr. > 5.0 mm, thermal cycling tested, isolation: AC 4800V Min, 115 degree C. FPQU2 FPQU2,FPQU8 FPQU2 TSM1A k ohm at 25 degree C XGPU2 UL 13a. Thermistor (NTC31) Interchangeable interchangeable 470k ohm at 25 degree C XGPU2 UL (Alternate) 14. Transformer (T1) (For Construction A) Delta Electronics (Jiangsu) Co., Ltd. MV-MP11204 or or MV-MP12664 Open type construction with ferrite core, see Enclosure a. Transformer (T1) (For Construction B) Delta Electronics (Jiangsu) Co., Ltd. MV-MP , 4-15 for detail. Open type construction with ferrite core, see Enclosure 4-19 for detail. UL UL UL OBJY2 UL Insulation System Delta Electronics, Inc. MP-130I Class B OBJY2 UL 15. Plastic Enclosure SABIC INNOVATIVE PLASTICS B V 945 V-0, 120 degree C, 2.2mm min. QMFZ2 thickness. See Enclosure 4-06 UL and 4-07 for the detail shape. 15a. Plastic Enclosure SABIC INNOVATIVE 945 V-0, 120 degree C, 2.2 mm QMFZ2 UL

12 Issue Date: Page 11 of 15 Report Reference # E A1542-UL (Alternate) 15b. Plastic Enclosure (Alternate) 15c. Plastic Enclosure (Alternate) 15d. Plastic Enclosure (Alternate) 15e. Plastic Enclosure (Alternate) 15f. Plastic Enclosure (Alternate) 16. Insulation tape (for FL2) 16a. Insulation tape (for FL2) (Alternate) 16b. Insulation tape (for FL2) (Alternate) 17. Shield Ass'y(For Construction A) 17a. Shield Ass'y(For Construction B) 17-1.Insulator 17-1a. Insulator (Alternate) 17-1 b. Insulator (Alternate) 17-1c. Insulator (Alternate) 17-1d. Insulator (Alternate) PLASTICS JAPAN L min. thickness L C SABIC INNOVATIVE 945 V-0, 120 degree C, 2.2 mm QMFZ2 UL PLASTICS US L L C min. thickness BAYER Makrolon 6485 V-0, 115 degree C, 2.2 mm min QMFZ2 UL MATERIALSCIENCE thickness AG TRINSEO (HONG CELEX 3600 V-0, 125 degree C, 2.2 mm min QMFZ2, QMFZ2 UL KONG) LTD thickness SAMSUNG SDI CO INFINO HN-1064I V-0, 130 degree C QMFZ2 UL LTD 2.2 mm min thickness IDEMITSU KOSAN AZ2201 V-0, 125 degree C, 2.2 mm min QMFZ2 UL CO LTD thickness 3M COMPANY 1350F degree C, minimum two OANZ2 UL ELECTRICAL layers MARKETS DIV (EMD) 3M COMPANY 1350T degree C OANZ2 UL ELECTRICAL MARKETS DIV (EMD) 3M Taiwan Ltd. 1388Y degree C, minimum two OANZ2 UL layers Interchangeable Interchangeable See Enclosure 4-10 for dimension details. Interchangeable Interchangeable See Enclosure 4-20 for dimension details. Sabic Innovative FR25A V-0, 125 degree C, Min. 0.4 QMFZ2 UL Plastics US L L C mm thick Sun Delta Corp VS120 V-0, 130 degree C, min. 0.4 QMFZ2 UL mm thick, Sun Delta Corp VS520 V-0, 130 degree C, min. 0.4 QMFZ2 UL mm thick, Sabic Innovative FR1 Min. 0.4mm thickness, VTM-0, QMFZ2 UL Plastics US L L C 125 degree C Sabic Innovative FR1 Min. 0.4mm thickness, VTM-0, QMFZ2 UL Plastics Japan L L C 125 degree C

13 Issue Date: Page 12 of 15 Report Reference # E A1542-UL 17-1e. Insulator (Alternate) 17-1f. Insulator (Alternate) Shield Top(For Construction A) 18. Shield Top(For Construction B) Insulation tape 3M COMPANY ELECTRICAL MARKETS DIV (EMD) 18-1a. Insulation tape (Alternate) 18-1b. Insulation tape (Alternate) 19. Heat sink (HS1) (For Construction A) 19. Heat sink (HS1) (For Construction B) 19. Heat sink (HS2) (For Construction A) 19. Heat sink (HS2) (For Construction B) 20. Heat sink (HS3) (For Construction A) 19. Heat sink (HS3) (For Construction B) 21. Interconnecting cable Sumitomo Bakelite Co Ltd PHF150MA Min. VTM-0, 130 degree C, min mm thick. SABIC INNOVATIVE FR25A V-0, 125 degree C, Min. 0.4 PLASTICS JAPAN L mm thick L C Interchangeable Interchangeable See Enclosure 4-09 for dimension details. Interchangeable Interchangeable See Enclosure 4-21 for dimension details. 1350F degree C, minimum two layers 3M COMPANY ELECTRICAL MARKETS DIV (EMD) 3M COMPANY ELECTRICAL MARKETS DIV (EMD) QMFZ2 QMFZ2 UL UL OANZ2 1350T degree C, OANZ2 UL 1388Y degree C, minimum two layers Interchangeable Interchangeable See Enclosure 4-12 for dimension details. Interchangeable Interchangeable See Enclosure 4-22 for dimension details. Interchangeable Interchangeable See Enclosure 4-12 for dimension details. Interchangeable Interchangeable See Enclosure 4-22 for dimension details. Interchangeable Interchangeable See Enclosure 4-12 for dimension details. Interchangeable Interchangeable See Enclosure 4-22 for dimension details. Interchangeable Interchangeable Min. 80 degree. C, 30 V, max 3.05m long, jacketed, VW-1 or FT-1, had been evaluated for external use OANZ2 UL UL AVLV2 UL 4-08

14 Issue Date: Page 13 of 15 Report Reference # E A1542-UL Strain Relief Interchangeable Interchangeable PVC plastic bushing integrally QMFZ2 UL Means molded on Output Cord. 22. PWB Interchangeable Interchangeable Rated V-0, 130 degree C, ZPMV2 UL 23. Internal Wiring Interchangeable Interchangeable FEP, PTFE, PVC, TFE, AVLV2 UL neoprene, polyimide or marked VW-1; min 300 V, 80 degree C, routed away from secondary (SEC, ELV, SELV) uninsulated live parts 24. Glue Interchangeable Interchangeable Min. V-2. QMFZ2 UL 25. Functional earthing FURUKAWA TEX-E 130 degree C OBJT2 UL Wiring ELECTRIC CO LTD 25a. Functional earthing Totoku Electric Co TIW-3(for TÜV), 155 degree C OBJT2 UL Wiring (Alternate) Ltd TIW-3X(for UL) 25b. Functional earthing Wiring (Alternate) Totoku Electric Co Ltd TIW-2(for TÜV), TIW-2X(for UL) 130 degree C OBJT2 UL 25-1.Heat Shrinkable DONGGUAN SALIPT SALIPT S-901- Rating 125 degree C, VW-1, YDPU2 UL Tubing used on FG wire CO LTD 600 isolation: AC 3000V, min a.Heat Shrinkable Tubing used on FG wire (Alternate) 25-1b.Heat Shrinkable Tubing used on FG wire (Alternate) 25-1c.Heat Shrinkable Tubing used on FG wire (Alternate) 25-1d.Heat Shrinkable Tubing used on FG wire (Alternate) Tyco Electronics Corp (RAYCHEM) Tyco Electronics Corp (RAYCHEM) Versafit Versafit V2 mm thickness Rating 125 degree C, VW-1, isolation: AC 3000V, min mm thickness Rating 125 degree C, VW-1, isolation: AC 3000V, min mm thickness WELL ONE CO LTD GT-2 Rating 125 degree C, VW-1, isolation: AC 3000V, min mm thickness Tyco Electronics Corp (RAYCHEM) ZH2 Rating 125 degree C, VW-1, isolation: AC 3000V, min mm thickness YDPU2 YDPU2 YDPU2 YDPU2 UL UL UL UL

15 Issue Date: Page 14 of 15 Report Reference # E A1542-UL Enclosures Type Supplement Id Description Photographs 3-01 External View - Inlet side Photographs 3-02 External View - Cover side Photographs 3-03 External View - Chassis side Photographs 3-04 Side View 1 Photographs 3-05 Side View 2 Photographs 3-06 Construction A - Internal View 1- with metal shielding Photographs 3-07 Construction A - Internal View 2- with metal shielding Photographs 3-08 Construction A - internal 3 -without metal shielding Photographs 3-09 Construction A - internal 4 -without metal shielding Photographs 3-10 Construction A - Component Side View Photographs 3-11 Construction A - Trace Side View Photographs 3-12 Construction A - Glue Point View 1 Photographs 3-13 Construction A - Glue Point View 2 Photographs 3-15 Construction A - Trace side view(add one tape on outside of transformer) Photographs 3-16 Component side(transformer with tape) Photographs 3-17 Construction A - Transformer view-1(with tape) Photographs 3-18 Construction A - Transformer view-2(with tape) Photographs 3-19 Construction A - Trace side view( one tape was added on transformer MV-MP12664) Photographs 3-20 Construction B Internal View 1- with metal shielding Photographs 3-21 Construction B Internal View 2- with metal shielding Photographs 3-22 Construction B Internal View 3- open metal shielding Photographs 3-23 Construction B Component side Photographs 3-24 Construction B - Trace side Diagrams 4-01 Construction A - Line Filter FL1 Spec Diagrams 4-02 Construction A - Line Filter FL2 Spec Diagrams 4-03 Line Filter L1 Spec Diagrams 4-04 Construction A - Line Filter L2 Spec Diagrams 4-05 Construction A - Transformer T1 Spec Diagrams 4-06 Enclosure chassis Diagrams 4-07 Enclosure cover Diagrams 4-08 Output Cord and strain relief Diagrams 4-09 Construction A - Shield Top (EMI Shielding)

16 Issue Date: Page 15 of 15 Report Reference # E A1542-UL Diagrams 4-10 Construction A - Shield Ass'y (EMI Shielding) Diagrams 4-12 Construction A - Heatsink Spec Diagrams 4-13 Construction A - Glue Location and Amount Diagrams 4-14 Construction A - Working voltage location(a1 to A4) Diagrams 4-15 Construction A - Alternative transformer T1 spec. Diagrams 4-16 Construction B - Line Filter FL1 Spec Diagrams 4-17 Construction B - Line Filter FL2 Spec Diagrams 4-18 Construction B - Line Filter L2 Spec Diagrams 4-19 Construction B - Alternative transformer T1 spec. (MV-MP15038) Diagrams 4-20 Construction B - Shield Ass'y Diagrams 4-21 Construction B - Shield Top Diagrams 4-22 Construction B Heatsink (HS1, HS2, HS3) Diagrams 4-23 Construction B - Glue location Schematics + PWB 5-01 Construction A - Model ADP-120RH B PWB Layout (P/N: ADP- 120RH BA) Schematics + PWB 5-02 Construction B - Model ADP-120RH B PWB Layout (P/N: ADP- 120RH DA) Miscellaneous 7-03 Model difference

17 PHO-01

18 PHO-02

19 PHO-03

20 PHO-04

21 PHO-05

22 PHO-06

23 PHO-07

24 PHO-08

25 PHO-09

26 PHO-10

27 PHO-11

28 PHO-12

29 PHO-13

30 PHO-15

31 PHO-16

32 PHO-17

33 PHO-18

34 PHO-19

35 PHO-20

36 PHO-21

37 PHO-22

38 PHO-23

39 PHO-24

40 DIA-01

41 DIA-01

42 DIA-01

43 DIA-01

44 DIA-02

45 DIA-02

46 DIA-02

47 DIA-02

48 DIA-02

49 DIA-02

50 DIA-03

51 DIA-03

52 DIA-03

53 DIA-03

54 DIA-04

55 DIA-04

56 DIA-04

57 DIA-04

58 DIA-04

59 DIA-04

60 DIA-04

61 DIA-05

62 DIA-05

63 DIA-05

64 DIA-05

65 DIA-05

66 DIA-05

67 DIA-05

68 DIA-05

69 DIA-05

70 DIA-05

71 DIA-05

72 DIA-05

73 DIA-06

74 DIA-06

75 DIA-07

76 DIA-07

77 DIA-08

78 DIA-08

79 DIA-09

80 DIA-09

81 DIA-10

82 DIA-10

83 DIA-10

84 DIA-12

85 DIA-12

86 DIA-12

87 DIA-13

88 DIA-13

89 DIA-14

90 DIA-15

91 DIA-15

92 DIA-15

93 DIA-15

94 DIA-15

95 DIA-15

96 DIA-15

97 DIA-16

98 DIA-16

99 DIA-17

100 DIA-17

101 DIA-17

102 DIA-17

103 DIA-18

104 DIA-18

105 DIA-18

106 DIA-19

107 DIA-19

108 DIA-19

109 DIA-19

110 DIA-20

111 DIA-20

112 DIA-21

113 DIA-22

114 DIA-22

115 DIA-22

116 DIA-23

117 DIA-23

118 SCH-01

119 SCH-01

120 SCH-01

121 SCH-01

122 SCH-01

123 SCH-02

124 SCH-02

125 MIS-03

126 Issue Date: Page 1 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No. 1 -The manufacturer submitted a sample representing production of AC/DC Adapter, Models ADP-120RH B for examination and test. -Tests were conducted by Delta Electronics (Jiangsu) Ltd, address NO 1688 JIANGXING EAST RD WUJIANG ECONOMIC DEVELOPMENT ZONE WUJIANG CITY JIANGSU PROVINCE CHINA, under WTDP program. -Test results reported relate only to the items tested. -- Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL

127 Issue Date: Page 2 of 9 Report Reference # E A1542-UL Revision Date: Test Record The following tests were conducted: Test End Product Reference Page General Guidelines Guide Information Page - Maximum Output Voltage, Current, and Volt Ampere Measurement ( ) Input: Single-Phase (1.6.2) Capacitance Discharge ( ) SELV Reliability Test Including Hazardous Voltage Measurements (2.2.2, 2.2.3, 2.2.4, Part ) Limited Current Circuit Measurement (2.4.1, 2.4.2) Humidity (2.9.1, 2.9.2, 5.2.2) Determination of Working Voltage; Working Voltage Measurement (2.10.2) Transformer and Wire /Insulation Electric Strength ( ) Strain Relief (3.2.6, 4.2.1, 4.2.7) Steady Force ( ) Impact (4.2.5, 4.2.1, Part ) Drop (4.2.6, 4.2.1) Stress Relief (4.2.7, 4.2.1) Heating (4.5.1, , ) Touch Current (Single-Phase; TN/TT System) (5.1, Annex D) Electric Strength (5.2.2) Component Failure (5.3.1, 5.3.4, 5.3.7) Transformer Abnormal Operation (5.3.3, 5.3.7b, Annex C.1) Power Supply Output Short-Circuit/Overload (5.3.7) Testing Location/Comments Test results are valid only for the tested equipment. These tests are considered representative of the products covered by this Test Report. The test methods and results of the above tests have been reviewed and found to be in accordance with the requirements in the Standard(s) referenced at the beginning of this Test Report. The following tests were waived: Test Durability of Marking (1.7.11) Thin Sheet Material ( , , ) Ball Pressure (4.5.5, 4.5) Rationale for Waiving R/C Label used The ES test for insulation tape was evaluated in previous investigation. The ES test for insulation tape was evaluated in previous investigation.

128 Issue Date: Page 3 of 9 Report Reference # E A1542-UL Revision Date: Test Record The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-01 CRD of 12CA45826 Datasheet 2-02 DS of 12CA45826

129 Issue Date: Page 4 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No. 2 - The manufacturer submitted a sample representing production of AC/DC Adapter, model ADP-12RH B employing the changes below for investigation and evaluation: 1. Correct bleeder resistors(r1, R2) rating from "1M ohm" to "2M ohm." 2. Add alternate optocoupler IC35: Vishay Semiconductor GMBH, types VOL617AX(X=2, 3, 4), VOL618AX(X=2, 3, 4). 3. Add alternate X-Capacitors (CX1): 3-1. Pilkor Electronics Co Ltd, type PCX Epcos Electronic Components S A, types B3292x-x3xxx(UL), B3292#(VDE, CQC). - No test was considered necessary. The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-03 CRD

130 Issue Date: Page 5 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No The manufacturer submitted representative production sample of AC/DC Adapter, Model ADP-120RH B, employing 1. Add one tape on outside of transformer. 2. Add alternate insulator source. 3. Correct technical data of insulation tape(item 16a of table 1.5.1) -- No test was considered necessary due to engineering judgment based on the change will not negatively impact the performance of the product. -- Additional tests were not considered necessary due to tests conducted in Test Record 1. The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-04 CRD

131 Issue Date: Page 6 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No The manufacturer submitted representative production sample of AC/DC Adapter, Model ADP-120RH B, with alternative transformer MV-MP12664 with adding one tape to base. -- No test was considered necessary due to engineering judgment based on the change will not negatively impact the performance of the product. -- Additional tests were not considered necessary due to tests conducted in Test Record 1 to 3. The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-05 CRD

132 Issue Date: Page 7 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No. 5 -The manufacturer submitted a sample representing production of AC/DC Adapter, Models ADP-120RH B for examination and test. 1. alternate construction B 2. upgrade standard to UL nd A1+A2 -Test results reported relate only to the items tested. The following tests were conducted: Test End Product Reference Page General Guidelines Guide Information Page - Maximum Output Voltage, Current, and Volt Ampere Measurement ( ) Input: Single-Phase (1.6.2) Capacitance Discharge ( ) SELV Reliability Test Including Hazardous Voltage Measurements (2.2.2, 2.2.3, 2.2.4, Part ) Limited Current Circuit Measurement (2.4.1, 2.4.2) Humidity (2.9.1, 2.9.2, 5.2.2) Determination of Working Voltage; Working Voltage Measurement (2.10.2) Strain Relief (3.2.6, 4.2.1, 4.2.7) Steady Force ( ) Impact (4.2.5, 4.2.1, Part ) Drop (4.2.6, 4.2.1) Stress Relief (4.2.7, 4.2.1) Heating (4.5.1, , ) Touch Current (Single-Phase; TN/TT System) (5.1, Annex D) Electric Strength (5.2.2) Component Failure (5.3.1, 5.3.4, 5.3.7) Transformer Abnormal Operation (5.3.3, 5.3.7b, Annex C.1) Power Supply Output Short-Circuit/Overload (5.3.7) Testing Location/Comments for output cord Test results are valid only for the tested equipment. These tests are considered representative of the products covered by this Test Report. The test methods and results of the above tests have been reviewed and found to be in accordance with the requirements in the Standard(s) referenced at the beginning of this Test Report.

133 Issue Date: Page 8 of 9 Report Reference # E A1542-UL Revision Date: Test Record The following tests were waived: Test Durability of Marking (1.7.11) Rationale for Waiving UL Label Energy Hazard Measurements ( , 2.1.2, ) See Thin Sheet Material ( , , ) See refer report Transformer and Wire /Insulation Electric Strength ( ) See The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-06 CRD Datasheet 2-07 DataSheet

134 Issue Date: Page 9 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No. 6 -The manufacturer submitted a sample representing production of AC/DC Adapter, Models ADP-120RH B for examination and test. 1. Provided lost information on component list table for Transformer (T1) (For Construction A), Model MV- MP No tests were necessary as below:

135 Issue Date: Page 10 of 9 Report Reference # E A1542-UL Revision Date: Test Record Test Record No. 7 The manufacturer submitted representative production sample of AC/DC Adapter, Model ADP-120RH D employing the following changes. 1) Added a new model ADP-120RH D which is similar to model ADP-120RH B except for trademark. No tests were deemed necessary due to engineering judgments. The results of this investigation, including construction review and testing, indicate that the products evaluated comply with the applicable requirements in the U.S. and Canadian (Bi-National) Standard for Safety of Information Technology Equipment, Including Electrical Business Equipment, CAN/CSA-C22.2 No , Second Edition and UL , Second Edition issued March 27, 2007, including revisions through revision dated October 14, Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any authorized licensee of UL. The following supplements are provided as a part of this Test Record. NOTE: These supplements are only available to the Applicant via the CDA system. Type Supplement Id Description Attachment 2-08 CRD

136 01-ATT-01

137 03-ATT-03

138 03-ATT-03

139 04-ATT-04

140 05-ATT-05

141 06-ATT-06

142 06-ATT-06

143 08-ATT-08