4.2. Characteristics. handset

Transcription

1 COMMUNICATION Kommunikation

2 FIREFIGHTERS COMMUNICATION SYSTEM EN handset firecom freecom The fire-fighters communication system enables a two-way communication between the car of the fire-fighters lift, the fire-fighters access level and the machine room of the lift. The system consists of three components: - handset (handset/exchange) - fire-com (hands-free speakerphone/fire-fighters speakerphone) - free-com (hands-free speakerphone/car speakerphone) Fire-fighters operation is initiated via the fire-fighters switch. Power supply 24 V DC (± 15 %) No. of participants 1 handset, 2 hands-free speakerphones Network extension max. 250 m with 0.5 mm² max. 500 m with 1 mm² Lines high, low, UB,, line Operating voltage min. 12 V of the components Current consumption of the system without luminaries Installation closed-circuit status approx. 40 ma operating status approx 150 ma communication status approx 250 ma to the controller 2 machine room of fire-fighters lift 0 1 handset USV 24 V 2 S2 Mae fire-fighters switch firecom freecom fire-fighters access level i-indicator enforcing button speech acknowledgement S1 Ma fire-fighters key switch 0 1 call button 4.2 Only to be used in combination with Styles and Components wg and grille wg (water-protected). For additional information regarding EN please refer to Norms. car of fire-fighters lift

3 Firefighters Communic. FIREFIGHTERS COMMUNICATION SYSTEM EN handset (handset/exchange) Function Fixing Connection technology The handset consists of: the handset, the wall holder and the flexible cable. On the outside of the handset of the display, is where the LED and the keypad are placed. The loudspeaker and the microphone are set inside. The handset takes over the internal exchange functions and serves as exchange. This exchange has special functions like e. g. check-calling all components and control over establishment and termination of connections. wall holder 0.1 mm²... 1 mm² Current consumption (per device) Temperature range Compliance approx. 7 ma ma (stand-by) approx. 40 ma (active) max. 60 ma (communication) 0 C C (2h) EN Wall holder Ø ø 4 Connection not occupied not occupied not occupied 24 V - 30 V DC JPR1 HIGH HIGH LOW LOW UB UB LINE LINE JPR2 Fixing accessories provided on site 4.3

4 FIREFIGHTERS COMMUNICATION SYSTEM EN Fire-com (hands-free speakerphone/fire-fighters speakerphone) Fixing Connection technology The hands-free speakerphone fire-com serves to participate in an interactive 2-way communication. According to EN the water- and penetrationprotected fire-com is placed behind the faceplate of the fire-fighters fixture at the fire-fighters access level. Besides an ESD housing the fire-com is equipped with a microphone and a loudspeaker with volume control. welding studs M3 x 8 (faceplate fixing) 0.1 mm²... 1 mm² Current consumption approx. 7 ma ma (stand-by) (per device) approx. 45 ma 50 ma (active) approx. 80 ma 90 ma (communication) Temperature range 0 C C (2 h) Compliance EN Rear view welding stud M3 x Connection DIP switch i-indicator communication indicator enforcing button space for cables H1 H2 T1 volume i-indicator (H1) communication indicator (H2) enforcing button (T1) LINE UB LOW HIGH fire-fighters switch (S2) ( ) ø44 ø Only to be used in combination with Styles and Components wg and grille wg (water-protected). Please order fixing accessories separately.

5 Firefighters Communic. FIREFIGHTERS COMMUNICATION SYSTEM EN Free-com (hands-free speakerphone/car speakerphone) Fixing Connection technology The hands-free speakerphone free-com serves to participate in an interactive 2-way communication. According to EN the water- and penetrationprotected free-com is placed behind the faceplate of the car fixture or on the car roof. Besides an ESD housing the free-com is equipped with a microphone and a loudspeaker with volume control. welding studs M3 x 8 (faceplate fixing) 0.1 mm²... 1 mm² Current consumption approx. 7 ma ma (stand-by) (per device) approx ma (active) approx ma (communication) Temperature range 0 C C (2 h) Compliance EN Rear view welding stud M3 x 8 Connection DIP switch call button space for cables H1 H2 T1 volume call released (H1) call accepted (H2) call button (T1) LINE UB LOW HIGH ø44 ø Only to be used in combination with Styles and Components wg and grille wg (water-protected). Please order fixing accessories separately. 4.5

6 FPM 32 Communication System HA 32 FPM 32 is a modular communication system for establishment of communications to the different areas of a lift installation: Car, porter s lodge, machine room. It consists of two components, the HA 32 (handset) and the LMK 32 (hands-free speakerphone). Via a 5-wire bus, the power supply and the speech signals as well as all calls and emergency calls are transmitted. Emergency calls from the hands-free speakerphones are signalised at all related handsets optically and acoustically. Power supply 12 V V DC No. of participants max. 16 handsets HA 32 max. 16 hands-free speakerphones LMK 32 Network extension max. 500 m bei 0.5 mm² max m bei 1 mm² Lines high, low, UB,, line LMK 32 Installation Z N1 N2 N3 F1 F2 F3 F4 F5 4.6

7 FPM 32 FPM 32 HA 32 (Handset) Function Fixing Connection technology On the outside of the handset, a display an LED and a keypad are placed. The loudspeaker and the microphone are set on the inside. The handset HA 32 can call all participants within the system as well as accept incoming calls and emergency calls. One handset HA 32 is configured as exchange and takes over internal exchange functions like e. g. check-calling all components and control over establishment and termination of connections. wall holder 0.1 mm²... 1 mm² Current consumption approx. 5 ma 7 ma (stand-by) (per device) approx. 40 ma (active) max. 60 ma (communication) Temperature range 0 C +40 C (2 h) Compliance EN Wall holder Ø ø 4 Connection not occupied not occupied not occupied 24 V - 30 V DC JPR1 HIGH HIGH LOW LOW UB UB LINE LINE JPR2 Fixing accessories provided on site 4.7

8 FPM 32 LMK 32 (Hands-Free Speakerphone) Fixing Connection technology The hands-free speakerphone LMK 32 is a component of the communication system FPM 32. It is installed in the lift car. In addition to the emergency call button two further indicators can be connected to the LMK 32 as external elements. The first indicator acknowledges the emergency call, the second indicator signalises the establishment of a communication. Besides an ESD housing the LMK 32 is equipped with a microphone and a loudspeaker with volume control. welding studs M3 x 8 (faceplate fixing) 0.1 mm²... 1 mm² Current consumption approx. 6 ma 8 ma (stand-by) (per device) approx. 40 ma (active) approx. 100 ma (communication) Temperature range 0 C C (2 h) Rear view Connection welding stud M3 x 8 DIP switch 104 space for cables volume HIGH 8 LOW 7 UB 6 5 LINE 4 emergency call button 3 emergency call accepted 2 emergency call released 1 Please order fixing accessories separately. Grille design depending on fixture design As pictogram indicator according to EN all illuminated fields and Style 42 indicators from SCHAEFER are suited.

9 F-H uni F-H2 uni F-H uni / F-H2 uni Communication System handset Daten Power supply No. of participants Network extension F-H uni and F-H2 uni are simple analogue communication systems for establishment of communications. The system consists of a handset for the machine room or the porter s lodge and a hands-free speakerphone LMK which is installed in the lift car. The simple variant F-H uni consists of one handset and one hands-free speakerphone LMK. With the variant F-H2 uni a second handset is included. 6 V V DC max. 2 handsets max. 1 hands-free speakerphone LMK max. 500 m with 0.5 mm² max m with 1 mm² LMK Installation F-H uni Installation F-H2 uni L: loudspeaker (+) B: common earth (-) 0: not occupied Z: not occupied U: microphone (+) L: loudspeaker (+) B: common earth (-) 0: not occupied Z: not occupied U: microphone (+) P L 2 4 P L 2 L B O Z U 6 7 L B O Z U L B O Z U L B O Z U car 1 8 P L NO 7 NO C 8 C potentiometer P = volume HEARING L = Lvolume SPEAKING V DC emergency call button potentiometer P = volume HEARING L = Lvolume SPEAKING V DC emergency call button 4.9

10 F-H uni / F-H2 uni Handset Function The handset is equipped with a loudspeaker and a microphone on the inside. By lifting of the handset a communication will be established to the car immediately. This communication will be terminated by hanging up the handset. If two handsets are used (F-H2 uni), both of them serve for establishing a communication with the car. 50 ø Fixing accessories provided on site

11 F-H uni F-H2 uni F-H uni / F-H2 uni LMK (Loudspeaker-Microphone Combination) Daten Fixing Connection technology The loudspeaker-microphone combination LMK serves as counterpart to the handset. It is installed behind the faceplate of the car fixture. welding studs M3 x 8 (faceplate fixing) 0.1 mm²... 1 mm² Connection U Z O B L L: loudspeaker (+) B: common earth (-) 0: not occupied Z: not occupied U: microphone (+) 39 welding stud M3 x 8 mounting plate L B O Z U 105 ø Please order fixing accessories separately. Grille design depending on fixture design 4.11

12 EASY ALARM Remote Emergency Call System basic device The remote emergency call system Easy-Alarm consists of the basic device Easy-Alarm EA-8-DPX_ and the hands-free speakerphone EA-LMK70A-DCDC. The automatic dialling and announcing device Easy-Alarm is connected to an analogue telephone line. The system is available in three variants: hands-free speakerphone Easy-Alarm Elevator (EA-8-DPX) Easy-Alarm Elevator PLUS (EA-8-DPXN) alarm upon contact of the emergency call button establishment of the hands-free communication after acceptance of the emergency call storage of max. 9 emergency call numbers which are dialled consecutively cancellation of the emergency call with change of the door contact status (prevention of misuse) monitoring of technical errors option for connection of pictograms according to EN implemented cyclic connection test power supply 11 V 27 V DC closed-circuit current approx. 60 ma includes all features of Easy-Alarm Elevator connection to further analogue telephone lines dial-in in stages with common use of the exchange line with telephone/modem power supply 11 V 27 V DC closed-circuit current approx. 60 ma Easy-Alarm Elevator includes all features of Easy-Alarm Elevator Machine Room includes a telephone in the machine room (EA-8-DPXM) power supply 11 V 27 V DC closed-circuit current approx. 80 ma Accessories pictograms according to EN EN For additional information regarding EN please refer to Norms As pictogram indicator according to EN all illuminated fields and Style 42 indicators from SCHAEFER are suited.

13 Easy Alarm EASY ALARM EA-LMK70A-DCDC (Loudspeaker-Microphone Combination) Daten Fixing Connection technology The hands-free speakerphone EA-LMK70A-DCDC serves as loudspeaker-microphone combination in the car fixture. It is equipped with a connection to the power supply of the system and a connection for the emergency call button. It is also possible to connect the technical alarm and/or the pictograms according to EN welding studs M3 x 8 (faceplate fixing) 0.1 mm²... 1 mm² Current consumption EA-LMK70A-DCDC with basic device EA-8-DPX U = 12 V I closed circuit = 70 ma I operation = 330 ma U = 24 V I closed circuit = 40 ma I operation = 200 ma EA-LMK70A-DCDC with basic device EA-8-DPXM U = 12 V I closed circuit = 90 ma I operation = 330 ma U = 24 V I closed circuit = 50 ma I operation = 200 ma Temperature range -30 C C (2 h) 21.6 welding stud M3 x space for cables Please order fixing accessories separately. Grille design depending on fixture design 4.13

14 EASY ALARM Connection car roof RJ45 8/8 option: prevention of misuse 4 8 telephone line RJ11 6/4 -> wire end sleeves car fixture emergency call button 1 potential-free NO-contact VIN power supply 11 V V DC - + optional pictograms according to EN (yellow) (green) bulb 1 bulb 2 S3 option: technical alarm If bulb 1 and/or bulb 2 are connected, the power supply (VIN) must be done via an accumulator. For protection of the accumulator we recommend using the LOW CURRENT devices of the Style 42 by SCHAEFER (U = 3 V 30 V DC / I = 2 ma). 42 pictogram according to EN emergency call accepted pictogram according to EN emergency call released MA 42 P LC RA 42 LC 4.14