ADDENDUM #2. BIDS CLOSE TUESDAY, May 8, 2018 at 1:00 p.m. (C.D.T.)

Size: px

Start display at page:

Download "ADDENDUM #2. BIDS CLOSE TUESDAY, May 8, 2018 at 1:00 p.m. (C.D.T.)"

Florence Bradford
5 years ago
Views:

1 Proposed multi-purpose facility addition for -- School District of Shiocton. Village of Shiocton, Wisconsin ADDENDUM #2 Project #65140 May 4, 2018 BIDDERS are informed that the plans and specifications of the above project are modified, corrected, or supplemented as follows and that this addendum shall become part of the Contract Documents. ALL Bidders carefully review ALL of the following items as they may not be in any sequence. BIDS CLOSE TUESDAY, May 8, 2018 at 1:00 p.m. (C.D.T.) Keller as Construction Manager will not be bidding or self-performing any work on this project. General: No revisions at this time. Specifications: Section : Bid Packages & Bid Unit Summary Bid Unit No. (1): - This bid unit shall include the removing and re-installing of the salvaged gate shown on Sheet C2.0. Drawings: 1. Reference sheet A1.1, First Floor Plan: a. Added 18 extension of fire wall to eastern most end. See also attached A1.1. b. Fresh air intake for AHU-2 removed from south CMU wall in Mechanical Room #105. See also attached A1.1 and mechanical drawings. 2. Reference sheet A1.2, Roof Plan: a. Fresh air intake for AHU-2 relocated to roof. See also attached A1.2 and mechanical drawings. 3. Reference sheet A2.0, South Elevation 2/A2.0: a. Fresh air intake removed from CMU wall. See also attached A2.0. b. Relief air louver for AHU-2 to be located not less than 4-0 from fire wall. See also attached A Reference sheet S1.0, Foundation Plan: a. Added 18 extension of fire wall to eastern most end. See also attached S Reference sheet S1.1, Roof Framing Plan: a. Fresh air intake added to roof. See also attached S1.1. b. Masonry lintel ML9 removed. See also attached S Reference sheet S3.1, Grouted Concrete Masonry 11 North of Frame-line A: a. See attached S3.1 for revised masonry wall elevation 3/S3.1. Page 1 of 2

2 Attachments: A1.1 A1.2 A2.0 S1.0 S1.1 S3.1 Substitutions: No revisions at this time. Civil: No revisions at this time. Plumbing: No revisions at this time. Mechanical: See attached Addendum #2. Electrical: No revisions at this time. END OF ADDENDUM #2 Page 2 of 2

Shiocton School Addition Addendum 2 05-04-2018 Plumbing Drawings No Changes HVAC Drawings Sheet M1.1 1. Removed relief air louver L-2 2.

9 Shiocton School Addition Addendum Plumbing Drawings No Changes HVAC Drawings Sheet M Removed relief air louver L-2 2. Relocated fresh air louver L-1 in same position as removed L-2 3. Added GRV-6 for AHU-2 relief 4. Modified AHU connections and ducting to serve new L-1 location and new GRV-6 Sheet 1. Removed L-2 from schedule 2. Added GRV-6 to schedule and added note 5 Plumbing Specifications No Changes HVAC Specifications No Changes 1343 S 27 th Street Caledonia, Wisconsin Fax

10 TM VESTIBULE EXISTING LOUVER SERVING PASSAGE 111 UNIT VENTILATOR TO BE 109 REMOVED 32"x16" XOA EXISTING UNIT HEATER TO REMAIN 3/4"øHHWR CH-1 3/4"øHHWS XUV EXISTING ROOF VENT LOUVERS TO BE REMOVED 3 MECHANICAL DEMO FLOOR PLAN N M1.1 SCALE: 1/8" = 1'-0" 3"ø XHHWR 3"ø XHHWS VESTIBULE PASSAGE "øHHWR 4"øHHWS 4"øHHWR GRV-3 GRV-2 2 1/2"ø XHHWR 3"øHHWS 3"øHHWR 4"øHHWS WOMEN'S 108 GRV-4 EXISTING CONNECTIONS TO EXISTING GYM UNIT 2 1/2"ø XHHWS EXISTING CONNECTIONS TO EXISTING GYM UNIT SHOWER 107 FD MEN'S 106 GRV-1 AHU-1 WOMEN'S 108 GRV-5 PRV-1 SHOWER 107 FD MECHANICAL 105 MEN'S /2"øHHWR AHU-2 2 1/2"øHHWS EXISTING PIPING TO EXISTING CABINET HEATER NEW ROOF VENT SERVING REMOVED EXISTING LOUVER SERVING UNIT VENTILATOR, PROVIDE FIRE DAMPER THROUGH WALL XUV CH-1 MULTI-PURPOSE 110 GRV-3 VESTIBULE PASSAGE "x16"OA "x16" XOA F EXISTING UNIT VENTILATOR TO REMAIN DF-4 DF-6 4"øHHWR 4"øHHWS GRV-2 DIFFUSERS ANGLED AT 45 DOWN TYPICAL OA OFF TOP OF AHU-1 INTO GRV-1 GRV-4 AHU-1 GRV øsa DF DF UPTURNED RA ELBOW WITH BIRDSCREEN 22"øSA 32"øSA 30"øSA 24"øSA 3"øHHWR 3"øHHWS RG3 52"x 20" 8000 DF-4,5 DF-6,7 AHU-1 $ $ S CO2 22"xRA NEW ROOF VENTS REPLACING OLD REMOVED WALL LOUVERS, 22"X22" DUCT DROP DOWN TO 1' ABOVE ATTIC INSULATION INTO ROOF ATTIC SPACE FOR INTAKE SERVING EXISTING VENTILATION FANS EWH-1 VESTIBULE 101 SD4 8" 150 CONFERENCE 102 STORAGE 103 AC-1 S AC-1 AC-1 T CONDENSATE PUMP AND PIPE RUN TO DRAIN IN MECANICAL ROOM CO2 RG2 x 22" øsa S AHU-2 $ DF-1,2,3 ROUTE CONDENSATE TO FLOOR DRAIN IN MECHANICAL ROOM S SD4 RG1 22"x 22" 1600 WOMEN'S 108 EG1 x 22" 75 RG2 x 22" 150 8"øSA RG1 22"x 22" /4"ø 6"øEA GRV-5 DF DF-3 PRV-1 6"øEA SHOWER 107 FD EG1 x 22" 100 FITNESS CENTER 104 øea 24"x22"SA 22"øSA 18"øSA 14"øSA 26"x24"SA 6"øEA 6"øEA MEN'S 106 øsa EG1 x 22" 75 26"x24"SA 26"x26"RA EG1 x 22" 75 DF GRV RG1 22"x 22" 1600 MOD 2 1/2"øHHWR 2 1/2"øHHWS AHU "x26"RA LINE SET TO BE RUN DOWN COLUMN AND OUT TO CONDESNING UNIT ACCU-1 PROVIDE SCREENED OPENING, DUCT OPEN TO PLENUM 1200 LB AHU-2 SET ON 4" HIGH 75"X75" CONCRETE PAD (HATCHED AREA) L-1 40"x 60" "x26"OA FRESH AIR LOUVER FOR AHU-2, BOT OF 10' AFF TEMPERATURE CONTROL PANEL LOCATION TERMINATE CONDENSATE AT FLOOR DRAIN Keller PLANNERSARCHITECTS BUILDERS FOX CITIES N216 State Road 55 P.O. Box 620 Kaukauna, WI PHONE (920) / FAX (920) MILWAUKEE W204 N11509 Goldendale Road Germantown, WI PHONE (262) / PROPOSED ADDITION FOR: FAX (262) "COPYRIGHT NOTICE" This design, drawing and detail is the copyrighted property of KELLER, INC. No part hereof shall be copied, duplicated, distributed, disclosed or made available to anyone without the expressed written consent of KELLER, INC. REVISIONS: PROJECT MANAGER: DESIGNER: MADISON 711 Lois Drive Sun Prairie, WI PHONE (608) FAX (608) WAUSAU 5605 Lilac Ave Wausau, WI PHONE (715) FAX (715) SHIOCTON SCHOOLS MULTI-PURPOSE FACILITY EJA EJA N5650 BROAD STREET SHIOCTON WISCONSIN, K. CLAFLIN C. MANSKE 4"ø XHHWS 4"ø XHHWR 2 1/2"ø XHHWS 2 1/2"ø XHHWR 1 MECHANICAL FLOOR PLAN N M1.1 SCALE: 1/8" = 1'-0" HVAC Sheet List Sheet Number Sheet Name M1.1 Mechanical Floor Plan Mechanical Schedules And Details DRAWN BY: EXPEDITOR: SUPERVISOR: PRELIMINARY NO: E. ASHLEY T. FRICKE R. LILLIE P17204 CONTRACT NO: MECHANICAL PIPING PLAN N M1.1 SCALE: 1/16" = 1'-0" 1343 S 27TH STREET CALEDONIA, WI P: F: DATE: SHEET: M1.1 04/24/ "ISSUED FOR BIDDING & CONSTRUCTION"

1. UNIT TO BE HUNG FROM STRUCTURE 2. RETURN AIR SMOKE DETECTOR PROVIDED AND WIRED BY EC, INSTALLED IN DUCT BY MC 3. HARD WIRED UNIT TEMPERATURE AND CO2 SENSORS TIED INTO EXISTING CONTROLS 4.

11 1. UNIT TO BE HUNG FROM STRUCTURE 2. RETURN AIR SMOKE DETECTOR PROVIDED AND WIRED BY EC, INSTALLED IN DUCT BY MC 3. HARD WIRED UNIT TEMPERATURE AND CO2 SENSORS TIED INTO EXISTING CONTROLS 4. PROVIDE 4" CONCRETE HOUSEKEEPING PAD 5. PROVIDE VFD WITH LOW SPEED HIGH SPEED OPERATION 6. INCLUDE CO2 SENSORS FOR DEMAND CONTROL VENTILATION, PROVIDE 300 CFM MINIMUM VENTILATION DURING OCCUPIED MODE 7. INCLUDE CO2 SENSORS FOR DEMAND CONTROL VENTILATION, PROVIDE 250 CFM MINIMUM VENTILATION DURING OCCUPIED MODE 1. PROVIDE DISCONNECT 2. PROVIDE GRAVITY BACKDRAFT DAMPER 3. PROVIDE SLOPED 18" ROOF CURB TO BE INSTALLED BY PEMB CONTRACTOR 1. PROVIDE BAKED WHITE ENAMEL FINISH, VERIFY WITH ARCHITECT 2. PROVIDE GALVANIZED FINISH, VERIFY WITH ARCHITECT 3. VAV DIFFUSER, PROVIDE 24V TRANSFORMER AND THERMOSTAT, COORDINATE WITH ELECTRICIAN 1. PROVIDE INTEGRAL THERMOSTAT 2. PROVIDE RECESS MOUNT 3. PROVIDE DISCONNECT 1. PROVIDE INTEGRAL THERMOSTAT 2. PROVIDE RECESS MOUNT 3. PROVIDE DISCONNECT 1. PROVIDE MANUFACTURER WALL MOUNTED SPEED CONTROLLER WITH INTEGRAL ON/OFF SWITCH AS SHOWN ON PLANS 1. VERIFY FINISH COLOR WITH ARCHITECT 2. PROVIDE SLOPED ROOF CURB TO BE INSTALLED BY PEMB CONTRACTOR 3. PROVIDE MOTORIZED DAMPER INTERLOCKED WITH AHU-1 FOR OPERATION 4. GREENHECK, RUSKIN, OR APPROVED EQUAL 5. PROVIDE MOTORIZED DAMPER INTERLOCKED WITH AHU-2 FOR OPERATION 1. ARCHITECT TO VERIFY LOUVER COLOR ROOF EXHAUST FAN SCHEDULE TAG SERVES AIRFLOW ESP HP RPM V Phase HZ MOUNTING LOCATION WIDTH HEIGHT MODEL MFG WEIGHT NOTES PRV-1 RESTROOMS 325 CFM 0.50 in-wg 0.10 hp V 1 60 Hz Roof Mounted 12 1/2" 12 1/2" G-090-VG Greenheck lb 1,2,3 GRILLES REGISTERS AND DIFFUSERS SCHEDULE TAG TYPE MOUNT AIR FLOW CFM NECK SIZE FACE SIZE MODEL MFG NOTES Supply Air LAYIN AS SHOWN ø 24"X24" SPD PRICE 1 Supply Air DUCT AS SHOWN 8"x36" 1">NECK SDG PRICE 2 SD4 Supply Air LAYIN AS SHOWN 8"ø 24"X24" PPD PRICE 1,3 RG1 Return Air LAYIN AS SHOWN 22"x22" 1">NECK 530-STEEL PRICE 1 RG2 Return Air LAYIN AS SHOWN 22"x 1">NECK 530-STEEL PRICE 1 RG3 Return Air LAYIN AS SHOWN 20"x52" 1">NECK EXTRUDED METAL NA EG1 Exhaust Air LAYIN AS SHOWN 22"x 1">NECK 530-STEEL PRICE 1 ELECTRIC HEATER SCHEDULE ELECTRICAL TAG SERVES BTU OUTPUT V P HZ A WATTS MODEL MFG NOTES EWH-1 VESTIBULE 6825 Btu 208 V 1 60 Hz 9.6 A 2000 W AWH4408 QMARK DESTRATIFICATION FAN SCHEDULE ELECTRICAL MARK SERVES FLOW FAN RPM V PH HZ WATTS MODEL MFG Weight NOTES DF-1 FITNESS CENTER CFM LC LEADING EDGE lb 1 DF-2 FITNESS CENTER CFM LC LEADING EDGE lb 1 DF-3 FITNESS CENTER CFM LC LEADING EDGE lb 1 DF-4 MULTI-PURPOSE 550 CFM A-25-SP-STD-120 Airius LLC lb 1 DF-5 MULTI-PURPOSE 550 CFM A-25-SP-STD-120 Airius LLC lb 1 DF-6 MULTI-PURPOSE 550 CFM A-25-SP-STD-120 Airius LLC lb 1 DF-7 MULTI-PURPOSE 550 CFM A-25-SP-STD-120 Airius LLC lb 1 AIR HANDLING UNIT SCHEDULE SUPPLY FAN COOLING HEATING TAG SUPPLY AIR OUTSIDE AIR ESP TSP TYPE MOTOR HP V P HZ FACE VEL. EAT DB EAT WB LAT DB LAT WB TOTAL CAP SENSIBLE FLOW FACE VEL. EAT LAT TOTAL CAP FLOW FLUID TYPE OPERATING WEIGHT MODEL MFG NOTES AHU CFM 1000 CFM 1.50 in-wg 1.50 in-wg FC FAN WITH VARIABLE SHEAVE 7.50 hp 208 V 3 60 Hz 490 FPM 80 F 67 F 58 F 57 F Btu/h Btu/h 74 GPM 490 FPM 45 F 100 F Btu/h 74 GPM 30% GLYCOL lb A17A0C0E Trane 1,3,5,6 AHU CFM 900 CFM 1.50 in-wg 2.83 in-wg ECM MOTORIZED IMPELLER 5.00 hp 208 V 3 60 Hz 510 FPM 80 F 67 F 58 F 57 F Btu/h Btu/h 45 GPM 510 FPM 45 F 100 F Btu/h 90 GPM 30% GLYCOL lb R10A0C0E Trane 2,3,4,5,7 CEILING HEATER SCHEDULE ELECTRICAL TAG SERVES BTU OUTPUT GPM V P HZ HP MODEL MFG NOTES CH-1 VESTIBULE Btu 1.7 GPM 120 V 1 60 Hz hp RFRC RITTLING 1,2,3 GRAVITY VENTILATOR SCHEDULE CONNECTION SIZE TAG SERVES MOUNTING AIRFLOW SP WIDTH LENGTH AREA MODEL MFG WEIGHT NOTES GRV-1 AHU-1 FRESH AIR Roof Mounted 8000 CFM 0.05 in-wg 42" 60" 17.5 SF FGI Greenheck lb 1,2,3,4 GRV-2 AHU-1 RELEIF AIR Roof Mounted 8000 CFM 0.05 in-wg 42" 60" 17.5 SF FGR Greenheck lb 1,2,3,4 GRV-3 EXISTING UNIT VENTILATOR Roof Mounted 1000 CFM 0.04 in-wg 16" 16" 1.8 SF FGI Greenheck lb 1,2,4 GRV-4 ROOF VENT Roof Mounted 1450 CFM 0.04 in-wg 22" 22" 3.4 SF FGI Greenheck lb 1,2,4 GRV-5 ROOF VENT Roof Mounted 1450 CFM 0.04 in-wg 22" 22" 3.4 SF FGI Greenheck lb 1,2,4 GRV-6 AHU-2 RELEIF AIR Roof Mounted 5500 CFM 0.05 in-wg 42" 42" 12.3 SF FGR Greenheck lb 1,2,4,5 LOUVER SCHEDULE TAG TYPE SERVES NOMINAL CFM FREE AREA VELOCITY PRESSURE DROP SIZE WIDTH HEIGHT MODEL MFG NOTES L-1 INTAKE AHU CFM " 60" ESD-635 GREENHECK 1 2 SUPPLY DUCT, SEE PLANS AND SPECS FOR SIZE, AND MATERIAL 1 BRANCH DUCT TAP 2 SCALE: NO SCALE SPIN IN SHEET METAL COLLAR VOLUME DAMPER WITH LOCKING NUT RETURN PLENUM WITH 1" ACCOUSTICAL LINER LAYIN CEILING ATTACH FLEX DUCT TO SHEET METAL WITH 175PSI NYLON STRAPS APPROVED BY UL-181-B- C 1'-2" ROUND BRANCH TAKEOFF 3 PLENUM RETURN GRILLE DETAIL SCALE: NO SCALE 24X24 GRILLE PROVIDE 24X24X14 PLENUM WITH 22X10 PLENUM OPENING 12X24 GRILLE PROVIDE 12X24X14 PLENUM WITH 12X10 PLENUM OPENING FLEXIBLE CANVAS CONNECTIONS ON SUPPLY AND RETURN SUPPLY AIR DUCTWORK. SEE DUCTWORK SPECS FOR GAUGE, INSULATION, AND MATERIAL, ETC. 3"X3" CHANNEL SUPPORT ISOLATION VALVES COIL SECTION SUPPORT FLEX WITH 1"WIDE STRAPS AT CENTER IF LONGER THAN 3'-0" 5'-0" MAX FLEX RUN 1" DEEP EXTERNAL CONDENSATE PAN WITH MOISTURE SENSOR INTERLOCKED WITH UNIT SHUTDOWN. SUPPORT FROM STRUCTURE ABOVE OR FROM UNIT SUPPORT 5 HORIZONTAL AIR HANDLING UNIT DETAIL SCALE: NO SCALE 1.5*R MINIMUM CL RADIUS ROOF EXHAUST FAN INSULATED MFG ROOF CURB SEE SCHEDULE FOR HEIGHT 2 EXHAUST FAN DROP DETAIL SCALE: NO SCALE PROVIDE MANUFACTURER REQUIRED CLEARANCE FOR EXPANSION RETAINING ANGLE MUST OVERLAP WALL OPENING BY 0'-1" ON ALL SIDES PROVIDE MINIMUM 12"x12" DUCT ACCESS DOOR FOR DAMPER ACCESS 4 FIRE DAMPER DETAIL SCALE: NO SCALE FILTER SECTION 1/2" THREADED ROD THROUGH SUPPORT OPENINGS. CONNECT TO STRUCTURE ABOVE PIPE CONDENSATE TO NEAREST DRAIN. VENTED TEE TWO WAY TEMPERATURE CONTROL VALVE OUTSIDE AIR DUCTWORK. SEE DUCTWORK SPECS FOR GAUGE, INSULATION, AND MATERIAL, ETC. MINIMUM 3" TRAP DEPTH RETURN AIR DUCTWORK. SEE DUCTWORK SPECS FOR GAUGE, INSULATION, AND MATERIAL, ETC. ROOF STRUCTURE DUCT DROP PROVIDE 1" DRIP PAN AT BOTTOM OF DROP RATED WALL SEE ARCH. DRAWINGS FOR DETAILS RETAINING ANGLES FASTENED TO SLEEVE MINIMUM 16GA 1-1/2"x1-1/2" DO NOT FASTEN ANGLES TO WALL HVAC SYMBOLS AND ABBREVIATIONS 12X10 12"WIDE X DEEP DUCT 12X10 12"ROUND DUCT T S CO NO2 CO2 CP RECT ELBOW RECT ELBOW WITH TURNING VANES RECT ELBOW UP OR DOWN THERMOSTAT SENSOR CO SENSOR NO2 SENSOR CO2 SENSOR CONTROL PANEL $ WALL SWITCH SD TC VD SMOKE DETECTOR TIMECLOCK VOLUME DAMPER MOTORIZED DAMPER SUPPLY RETURN ROUND ELBOW RECTANGULAR RADIUS ELBOW FLEX DUCT ROUND TAP 12X10AL 12X10 ALUMINUN DUCT 12X10SS 12X10 STAINLESS STEEL DUCT 12X10BI 12X10 BLACK IRON DUCT CONNECTION TO EXISTING HHWS HEATING HOT WATER SUPPLY HHWR HEATING HOT WATER RETURN F/S FIRE SMOKE DAMPER F S RD FIRE DAMPER SMOKE DAMPER RADIATION DAMPER RVD REMOTE OPERATED VOLUME DAMPER MOD SA RA EA RE OA GENERAL NOTES LINED DUCT MOTOR OPERATED DAMPER SUPPLY AIR RETURN AIR EXHAUST AIR RELIEF AIR OUTSIDE AIR 1. ALL DUCTWORK IS DIAGRAMMATIC AND COORDINATED TO THE BEST AVAILABLE INFORMATION. CONTRACTOR SHALL VERIFY STRUCTURE AND LOCATION OF OTHER TRADES PRIOR TO FABRICATION. 2. LIMIT FLEX RUNS TO A MAXIMUM OF 5'-0" AND ROUTE AS STRAIGHT AS POSSIBLE. 3. INSTALL ALL EQUIPMENT PER LOCAL AND STATE CODES AND PER MANUFACTURERS RECOMMENDATIONS. 4. OUTSIDE AIR INTAKES SHALL BE A MINIMUM OF 10'-0" FROM ANY BUILDING EXHAUST, FLUES, PLUMBING VENTS AND LOT LINE. 5. COORDINATE DIFFUSER LAYOUT WITH LIGHTING LAYOUT. 6. CONTRACTORS NEED PRIOR APPROVAL FOR QUOTING ALTERNATE EQUIPMENT. ALTERNATE EQUIPMENT MAY REQUIRE OPTION ACCESSORIESTO MATCH BASE BID EQUIPMENT. CONTRACTORS ARERESPONSIBLE FOR FURNISHING ALL SUCH ITEMS. 7. DUCT SIZES LISTED ON PLANS ARE THE REQUIRED CLEAR INSIDE DIMENSIONS. 8. THE CONTRACTOR SHALL PROVIDE THE OWNER WITH WRITTEN INSTRUCTIONS FOR THE OPERATION AND MAINTENANCE OF THE SYSTEM AND EQUIPMENT. 9. THERMOSTAT LOCATIONS SHALL BE REVIEWED BY OWNER. TENANT AND CONTRACTOR BEFORE INSTALLATION. CONTROLS SHALL BE LOCATED 48" ABOVE FINISHED FLOOR. 10. UNITS SHALL BE SUSPENDED WITH NON-COMBUSTIBLE HANGERS. Keller PLANNERSARCHITECTS BUILDERS FOX CITIES N216 State Road 55 P.O. Box 620 Kaukauna, WI PHONE (920) / FAX (920) MILWAUKEE W204 N11509 Goldendale Road Germantown, WI PHONE (262) / PROPOSED ADDITION FOR: FAX (262) TM MADISON 711 Lois Drive Sun Prairie, WI PHONE (608) FAX (608) WAUSAU 5605 Lilac Ave Wausau, WI PHONE (715) FAX (715) N5650 BROAD STREET SHIOCTON WISCONSIN, "COPYRIGHT NOTICE" This design, drawing and detail is the copyrighted property of KELLER, INC. No part hereof shall be copied, duplicated, distributed, disclosed or made available to anyone without the expressed written consent of KELLER, INC. REVISIONS: SHIOCTON SCHOOLS MULTI-PURPOSE FACILITY EJA EJA DUCT CONSTRUCTION AND INSULATION SCHEDULE SYSTEM TYPE LOCATION MATERIAL SMACNA PRESSURE CLASS SMACNA SEAL CLASS INSULATION TYPE MIN R-VALUE THICKNESS SUPPLY DUCT CONCEALED GALVANIZED 2" A FLEXIBLE FIBERGLASS 5 2" 1 EXPOSED GALVANIZED 2" A -- NA NA -- RETURN DUCT CONCEALED GALVANIZED 2" B NONE NA NA -- EXPOSED 2" GALVANIZED 2" B NONE NA 2.0" NA -- TOILET EXHAUST ALL GALVANIZED 2" B NONE NA 1.0" NA -- RELIEF AIR DUCT ALL GALVANIZED 2" B NONE NA NA -- OUTSIDE AIR DUCT INSIDE BLDG ENVELOPE GALVANIZED 2" B FLEXIBLE FIBERGLASS 5 2" 1 NOTES 1. OWENS CORNING, KNAUF, JOHNS MANVILL, OR 3M INSULATION 1. PROVIDE ELEVATED THERMOPLASTIC BASE FOR CONDENSING UNIT 2. PROVIDE LOW AMBIENT KIT FOR OPERATION DOWN TO -20 F 1. PROVIDE WALL MOUNTED WIRELESS REMOTE CONTROLLER 2. PIPE CONDENSATE WITH CONDENSATE PUMP AND 3/4" PVC PIPING AIR COOLED CONDENSING UNIT SCHEDULE ELECTRICAL TAG SERVES TONS OA Temp Liquid Connection Suction Connection V P H Hz MCA MOCP MODEL MFG WEIGHT NOTES ACCU-1 AC F 0' - 03/8" 0' - 05/8" 208 V 1 60 Hz 18 A 30 A PUY-A24NHA6 Mitsubishi Electric lb 1,2 DUCTLESS SPLIT UNIT SCHEDULE ELECTRICAL TAG SERVES CAPACITY (BTU) V P H MCA MODEL MFG WEIGHT NOTES AC-1 STORAGE/IT V 1 60 Hz 1 A PKA-A24KA6 Mitsubishi Electric lb 1,2 NOTES ISOLATION VALVES 6 2-WAY AHU WATER COIL SCALE: NO SCALE MANUAL KEY TYPE AIR VENT (TYP.) CAPPED DRAIN 3/4" BALL VALVE ISOLATION VALVES (TYP.) P/T TEST PLUG (TYP.) UNION (TYP.) TWO WAY TEMPERATURE CONTROL VALVE THERMOMETER (TYP.) AIR VENT, 1/4" BALL VALVE. INSTALL IN HIGH POINT OF HEADER OR RETURN PIPE TO ALLOW COMPLETE VENTING OF AIR FROM COIL CAPPED DRAIN, 3/4" BALL VALVE. INSTALL IN LOW POINT OF HEADER OR SUPPLY PIPING TO ALLOW COMPLETE DRAIN DOWN OF COIL (TYP.) DUCT TAG NOMENCLATURE: øxsa ROUND 1 - DUCT SIZE (ROUND -DIAMETER) (RECTANGULAR PLAN VIEW - WIDTH) (RECTANGULAR SECTION VIEW - HEIGHT) 2 - DUCT SHAPE -ROUND (ø) OR RECTANGULAR (x) 3 - DUCT SIZE (RECTANGULAR PLAN VIEW - HEIGHT) (RECTANGULAR SECTION VIEW - WIDTH) 4 - SYSTEM MODIFIER X -EXISTING NO MODIFIER -NEW 5 - SYSTEM TYPE SA -SUPPLY AIR RA -RETURN AIR EA -EXHAUST AIR OA -OUTSIDE AIR FA -FRESH AIR xxsa RECTANGULAR 1343 S 27TH STREET CALEDONIA, WI P: F: PROJECT MANAGER: DESIGNER: DRAWN BY: EXPEDITOR: SUPERVISOR: PRELIMINARY NO: CONTRACT NO: DATE: SHEET: K. CLAFLIN C. MANSKE E. ASHLEY T. FRICKE R. LILLIE P /24/ "ISSUED FOR BIDDING & CONSTRUCTION"

EXHAUST FAN SCHEDULE

EXHAUST FAN SCHEDULE DUCTWORK SCHEDULE CONCEALED SUPPLY AIR RECTANGULAR, RTU CONCEALED SUPPLY AIR RECTANGULAR, ERV CONCEALED SUPPLY AIR ROUND, RTU CONCEALED SUPPLY AIR ROUND, ERV EXPOSED SUPPLY AIR ROUND RUNOUTS RETURN AIR