6 5 0 E X WJ-SX650 WJ-SX650U

Transcription

1 Matrix System50EX

2 Matrix System 50EX. Enhancg Large-System Surveillance. cameras and 4 monitors, plus up to 4-doma Satellite capability The new Panasonic Matrix System50EX redefes "advanced" large-system surveillance. This new EXpanded edition of the world-renowned System50 adds the new Ma CPU, for flexible, fully tegrated control of up to 512 cameras and 4 monitors. Plus, our new WJ-ASC90 software upgrade makes the configuration of systems with up to 4 Satellite domas possible. For anyone needg to construct large scale systems to suit a wider range of applications such as casos, airports, transport termals, banks, shoppg complexes, prisons, or other government facilities, the smarter answer is clear. Matrix System50EX Up to 4 Up to 4 Up to 4 Control via IP Network Key Features of The Satellite System Multiple System50EX systems with central processg unit upgraded by WJ-ASC90, can be lked by video lk and Network. Up to 4 domas Up to of 4 domas. Up to 1,024 video lks across the domas. global operators (total of global and local operators) and 1,024 global alarms. Four global operator classes by combation of Global camera lock and Global camera lock override privileges. System50EX and System850 can be corporated to make a hybrid satellite system. Integrated Global and Local admistration software makes setup easy. Key Features of The Expanded System Basic Features puts and 4 outputs. All puts support multiplexed video, control data and VD2 sync over the coaxial cable, and cable compensation up to 1.2 km. RS-485 remote controlled cameras. Supports simultaneous use of 4 controllers cludg the System Controllers and Personal Computers usg ActiveX control terface. Up to 4 Matrix System50EX Admistration Software The standard software for basic (up to 512 x 4) system. Ma Menu s Setup Menu Recorders Setup Menu Alarm Functions Up to 1,024 alarm programs and various alarm terfaces cludg 1,024 termal puts, 25 termal outputs, 512 camera alarms, 512 Video loss alarms and 1,024 serial alarm puts (Total of termal puts and outputs is 1,024). Up to ten actions cludg spot, Tour Sequence, and Text for each alarm event. Each action can be assigned to one of the 1 targets, which cludes up to 4 monitors. Alarms can be scheduled by programmg the timer event function. Alarm priority control enables effective management for alarms, timer events and operators. Alarm Targets Setup Menu Event Scheduler Setup Menu General Functions Three sequencg features: Tour Sequence; 128 patterns, 4 steps, ; 128 patterns, 4 monitors, ; 128 patterns, 4 steps. Up to 1,024 Timer events cludg Spot, Tour Sequence,,, Alarm and Mode change. Full camera control cludg 255 preset position call, Menu setup, Colour/Black & White Change, Wiper, Defroster and 25 function codes (dependg on the camera model). Preset positions can easily be programmed by the system controller. operators with dividual level and priority settgs, and flexible system partitiong. Up to 32 recorders (WJ-HD31/309A, WJ-RT41) can be connected. * Connection with WJ-RT41 is a plan for future. s, matrix and recorders can be controlled seamlessly from the system controller. It will support a redundant CPU system without need of WJ-MPS850 CPU management switch unit, enablg lower cost. Front access for Ma Board and Power Supply matenance. WJ-ASC90 Upgrade Software for Satellite Configuration This optional software upgrade allows configuration of systems with up to 4 Satellite domas. Ma Menu Video Lk Setup Menu OSD Service Alarm Status, Alarm History (100 events), Video Loss Status, Video Loss History (100 events) and System Status can be viewed on a monitor. Time & Date Displays can be switched on and off from the system controller. 2 3

3 MAJOR FUNCTIONS A Rich Array of Features for More Reliable and Efficient Surveillance Three Sequencg Features for More Efficient Monitorg These features allow you to determe the sequence which you seem images from multiple cameras. System Controller buttons make monitorg more efficient by enablg stant selection of the pattern of your choice. Tour Sequence Automatically switches camera images sequentially on the selected monitor. Up to 128 patterns can be programmed with as many as 4 steps per pattern. preset position (1 ~ 255) and AUX output (1, 2) can also be controlled and up to 8,339 seconds dwell time is available each step. The image shifts automatically from one camera to another, as programmed. step 1 step 2 step 3 step 4 Tour 1 C2 C3 Allows stant spot display of selected camera with preset position (1 ~ 255) on up to 4 pre-selected monitors at once. Up to 128 patterns can be programmed C20 5 Flexible System Partitiong and Priority The System50EX has flexible system partitiong and priority features allowg for advanced operation management. Partitiong cludes Controller to Area, Monitor, view, control,, Alarm, Alarm I/O, Recorder, Operator-to-Controller and Monitor-to-. Priority control cludes Operator, Controller, Alarm and Timer-event so that the flexible priority control is available. For example, a higher operator will not be bothered by the lower priority alarms or timer events and higher priority alarms will not be disturbed by the lower priority operators or timer events. In addition, the System50EX can create the Areas cludg Monitors, Controllers, Tour Sequences, s and s. All these items, except controllers, can have a local number enablg the operators to select them by usg a simpler reference number. Partitiong and Priority Overview Controller- Logical 1 Logical 2 Logical 3 Logical 4 Logical 5 Controller- Partition Setup Menu M1 M4 The images can be seen on any monitor. Tour 2 Tour 3 Tour 128 Tour Sequences Setup Menu C9 3 C 0 4 C7 C4 1 C8 5 2 s Setup Menu Monitor 1 Monitor 2 Monitor 3 Monitor 4 Automatically switches Group preset patterns sequentially. Up to 128 patterns can be programmed with as many as 4 steps per pattern. Up to 8,339 seconds dwell time is available each step. 128 Tour Local -1 Physical 11 G-Preset Local -2 Physical 12 G-SEQ Local -3 Physical 13 Controller priority Cam-Mon Area ID -10 Tour Local -1 Physical 14 ID -10 G-Preset Local -2 Physical 15 ID -10 G-SEQ Local -3 Physical 1 Controller-Mon Cont-G.SEQ 2 1 Controller 1 Controller 2 AREA 1 Controller 3 Controller 4 Controller 5 AREA 2 step 4 step 1 C20 5 Operator priority Operator to Controller The Matrix System50EX supports flexible alarm handlg, up to 1,024 alarm programs and various alarm terfaces cludg 1,024 termal puts, 25 termal outputs, 512 camera alarms, 512 Video loss alarms and 1,024 serial alarm puts (Total of termal puts and outputs is 1,024). An alarm program can activate up to 10 actions cludg camera spot, Tour Sequence, and Text. Each action can be assigned to one of the 1 targets, which cludes up to 4 monitors, so that the multiple actions can effectively be displayed across the alarm target monitors. An alarm termal output can be triggered when an alarm is activated, acknowledged or reset. Example: Termal Alarm Event No.25 Alarm ID Priority Alarm Source Alarm Output Action No. Type ID Preset AUX Dwell Time Text Target 0 spot sec Entrance 1 Zoom 1 (M1, M2) 1 spot 2 OFF 5sec Entrance 1 Wide 1 (M1, M2) 25 1 Termal Tour SEQ 1 3sec Entrance Area 2 (M11, M12) 1 Preset Position 1 (Zoom to Entrance 1) Infrared Entrance 1 s Setup Menu 2 8 Group SEQ 1 4 sec Group level 1 3 (M31, M32, M33,M34) 9 Text only Entrance 1 Level 1 1 (M3, M4) WJ-SX50 Alarm Output 513 System Termal Alarm 25 Action 0 1 Target 1 M1 ZOOM C2 C3 M11 M11 M11 M31 Entrance 1 Level 1 C20 M32 Action 1 2 Target 1 M2 Action 2 Tour SEQ1 Target 2 M11 M33 Action 9 Text Target 1 M3 Monitor 1 5 M34 Monitor 2 Up to 1,024 Alarm Events Ensure That You Capture Vital Scenes Action 8 Group SEQ1 Target 3 M31, 32, 33, 34 Monitor 3 Monitor 4 Alarms can be scheduled by programmg the timer event function. Alarm priority control enables effective management for alarms, timer events and operators. Up to 1,024 Alarm Program status, up to 100 events of Alarm History and up to 100 events of Video-loss History can be viewed on a monitor. Up to 30 days of Alarm logs can be stored the ma CPU unit. Alarms can be suspended dividually by Arm/Disarm button from the system controller. Hold mode displays first alarm while sequence mode displays multiple alarms sequentially when multiple alarms are activated. User Management for Preventg Unauthorized Access operators can be registered with dividual operator IDs, passwords and priority (0 to 5,534). 1 operator levels are fully configurable with numerous parameters such as camera select, alarm select and DVR select. Admistrators for the system setup are registered separately, allowg secure user management. Operator Registration Example Timer Events for Simple, Certa Operation spot, Tour Sequence,,, Alarm arm/disarm and Mode change features can automatically be activated, followg programmed schedules. Up to 1,024 timer events can be registered. Event ID Priority Action ID Monitor Start Date Start Time End Date End Time Repeat 1 5 Alarm Disrm 11 Nov :00 Daily 2 5 Alarm Arm 11 Nov :00 Daily 3 10 spot Nov :00 31 Jan :00 Weekly 1, Tour SEQ Dec :00 1 Dec :00 Once Level 1 Permission Override Area Change ALM Select ALM Reset (ALL) ALM Ack/Reset ALM Arm/Dis (ALL) ALM Arm/Dis ALM History Svc Output Ports CAM Preset Prg CAM Menu On/Off CAM Function Cds CAM Setup Data Override DVR Select DVR Ctrl Tour Sequence SEQ Controller Prg Video Loss Svc MON Lock OSD On/Off Level 2 Area Change ALM Reset (ALL) ALM Ack/Reset ALM Arm/Dis Output Ports CAM Menu On/Off CAM Function Cds Override Video Loss Svc Password Level 3 Priority RATOR S LEVEL TABLE Level Level Setup Example Operator Classes Setup Menu

4 PRODUCT CONFIGURATION Matrix Switcher: WJ-SX50 Power Source 220 V ~ 240 V, 50 Hz Power Consumption 0 W Ambient Operatg Temperature 10 C ~ +50 C Ambient Operatg Humidity Less than 90 % Video Input Board x 1 Video Output Board x 1 Expansion Slot x 1 RS-485 () Port -conductor modular jack x 4 (2-wire or 4-wire communication, With termation switches (MODE 1 ~ 4)) 420 mm x 25 mm x 372 mm (excludg rubber feet and projections) 19.0 kg Expansion Slot x 3 RS-485 () Port -conductor modular jack x 12 (2-wire or 4-wire communication, With termation switches (MODE 1 ~ 4)) Extension Port -conductor modular jack x 2 (EXTENSION 1 IN, OUT) (With a termation switch (TERM: ON, OFF)) Extension Port 37p D-sub connector x 2 (EXTENSION IN 2, 3) Extension Port 37p D-sub connector x 2 (EXTENSION OUT 2, 3) 420 mm x 25 mm x 372 mm (excludg rubber feet and projections) 18.0 kg Central Processg Unit: Video Input Board: WJ-PB5C32 SPECIFICATIONS SPECIFICATIONS Card Cage: WJ-SX50U SPECIFICATIONS Input (CAMERA IN 1 ~ 32) 1 V [p-p] / 75 Ω (BNC x 32), composite video signal 0.5 V [p-p] / 75 Ω data signal and 2.5 V [p-p] / 75 Ω vertical timg pulse multiplexed Video Output 1 V [p-p] / 75 Ω (25p D-sub connector x 4), (VIDEO OUT 1 ~ 4) active loop-thru output Alarm Input N.O. (Normally Open contact) or (ALARM IN) N.C. (Normally Close contact) selectable x 32 (37p D-sub connector) Ma Board 34 mm x 42 mm x 225 mm IN X-2 Board IN X-1 Board 355 mm x 38 mm x 115 mm Video Output Board: WJ-PB5M1 SPECIFICATIONS Monitor Output 1 V [p-p] / 75 Ω (BNC x 1) (MONITOR OUT 1 ~ 1) Data Port (DATA 1 ~ 4) DATA 1 Termal Mode (TMNL)/PS Data (PS DATA) selectable DATA 2 Termal Mode (TMNL) DATA 3, 4 Termal Mode (TMNL)/Digital Disk Recorder (HDR) selectable -conductor modular jack x 4 (With termation switches (MODE 1 ~ 4)) Alarm Output (ALARM OUT 1, 2) Alarm Output Open collector output x 32, Max. 24 V DC, 100 ma Alarm Recover Input Non-voltage make contact put x 1 Time Adjust Input Non-voltage make contact put x 1 Time Adjust Output Open collector output x 32, Max. 24 V DC, 100 ma Extension Port -conductor modular jack x 2 (EXTENSION 1 IN, OUT) (With a termation switch (TERM: ON, OFF)) VS Input 1 V [p-p] / 75 Ω (VS IN) VS Output (VS OUT (THRU)): VS loop-thru output, (VS OUT): 1 V [p-p] / 75 Ω (VS) Serial Port 9p D-sub connector x 2 Ma Board 34 mm x 42 mm x 225 mm OUT X-3 Board OUT X-2 Board OUT X-1 Board 355 mm x 38 mm x 115 mm Network Board: WJ-PB5E01 An expanded full matrix configuration for a maximum 512-camera x 4-output system. MXSW114 MXSW111 PC SYSTEM EXAMPLES Bridge11 Bridge12 WJ-SX50U WJ-SX50U WJ-SX50 WJ-SX50 WJ-SX50U WJ-SX50U WJ-SX50U WJ-CA8 x 4 WJ-CA8 x 12 WJ-CA8 x 12 WJ-CA8 x 4 WJ-SX50U WJ-SX50 monitor x 32 WJ-CA8 x 4 WJ-CA8 x 12 WJ-CA8 x 12 WJ-CA8 x 4 WJ-SX50U MXSW11 (1~25 x 1~32) MXSW113 MXSW WJ-CA5L07K 32 1 BNC x 32 Bridge1 (1~32) BNC x 32 BNC x 32 BNC x 32 WJ-HD31A x 2 WJ-HD31A x WJ-HD31A x WJ-HD31A x 2 WJ-HD31A x 2 WJ-HD31A x WJ-HD31A x WJ-HD31A x 2 monitor x 2 monitor x monitor x monitor x 2 monitor x 2 monitor x monitor x monitor x 2 monitor WJ-SX50U WJ-SX50 x 32 MXSW21 (1~25 x 33~4) MXSW22 (257~512 x 33~4) Bridge2 (33~4) HUB HUB MXSW12 (257~512 x 1~32) MXSW214 MXSW213 MXSW212 MXSW211 MXSW221 MXSW222 MXSW223 MXSW224 Bridge21 Bridge22 Note: MXSW and Bridge are only descriptive labels and neither product names nor model numbers. MXSW121 MXSW122 MXSW123 MXSW Model No. Description WJ-SX50 32 x 1 out Matrix Switcher WJ-SX50U Card Cage WJ-PB5C32 32ch Video Input Board WJ-PB5M1 1ch Video Output Board WJ-PB5E01 Network Board WJ-CA5L07K 0.7 m Expansion Cable Kit * WJ-CA8 D-sub/BNC Video Cable Ma CPU Unit Ethernet System Controller ** PTZ Dome / Fixed Monitor (for Switcher) 1ch Digital Disk Recorder Monitor (for Recorder) * Cable length depends on the cage layout. ** Number of controller depends on system configuration. Q'ty Front View <Front panel attached> Front View Up to 4 domas can be connected a satellite configuration. 88 Doma #1 Doma #2 Doma #3 Doma #4 (1 25) ( ) (1 25) ( ) <Front panel detached> Rear View WJ-SX50#1 WJ-CA8 WJ-SX50#3 (4 x 32) WJ-SX50#2 Video Lk WJ-SX50#1 WJ-CA8 WJ-SX50#3 (4 x 32) WJ-SX50#2 Video Lk MXCONT Rear View 420 WJ-SX50#4 WJ-SX50#5 WJ-SX50#4 WJ-SX50#5 MXSW WJ-CA8 WJ-CA8 Operation Indicator Screws Fan Alarm Indicator Hard Disk Drive Indicator Active Indicator Operation Switch Redundant Selector Mode Selector Reset Button Test Ports Ethernet Ports Peripheral Interface Ports Coolg Fan Unit Power Switch AC Inlet Socket Ethernet Port Alarm Output Ports 1, 2 VS Input Connector VS Output Loop-thru Connector VS Output Connector Serial Port WJ-ASC90 WJ-SX50# (4 x 32) WJ-ASC90 WJ-SX50# (4 x 32) WJ-ASC90 MXOSD SPECIFICATIONS SPECIFICATIONS Power Supply model: 220 V ~ 240 V AC, 50 Hz Power Consumption 0 W Ethernet Ports 10Base-T/100Base-TX, RJ-45 x 3 System controller* (1 port), System device (1 port), other (1 port) * Maximum 4 controllers RS-232C Port 9p D-sub connector x 2 Ambient Operatg Temperature +5 C ~ +45 C Ambient Operatg Humidity Less than 90 % 420 mm x 88 mm x 350 mm (excludg rubber feet and projections) 9 kg Ethernet Port 10Base-T/100Base-TX, RJ-45 x 1 Alarm Output Port 1, 2 Open collector output x 32, Max. 24 V DC, 100 ma VS Input 1 V [p-p] / 75 Ω (VS IN) VS Output (VS OUT (THRU)): VS loop-thru output (VS OUT): 1 V [p-p] / 75 Ω (VS) Serial Port 9p D-sub connector x mm x 38 mm x 134 mm IP Network Up to 4 domas. Each doma needs the WJ-ASC90 Upgrade Software. In one doma, the System50EX and the System850 cannot be mixed. Note: MXSW, MXCONT and MXOSD are only descriptive labels and neither product names nor model numbers. System50EX: up to 512 x 4 / Doma System850: up to 1,024 x 25 / Doma 7

5 SPECIFICATIONS (Expanded System) Video Number of Inputs 1.0 V [p-p] / composite 75 Ω / BNC Connector x Interface With Multiplexed Vertical sync (VD2) and control data. Logical No. Range 1 ~ 99,999 Number of Loop 1.0 V [p-p] / composite 75 Ω / 25p D-sub connectors. Through Outputs Active loop through. Number of Outputs 1.0 V [p-p] / composite 75 Ω / BNC Connector x Up to 4 Logical Monitor No. Range 1 ~ 9,999 Controller Number of Controllers 4 ( and ActiveX controller) Recorder Number of Recorders Up to 32 (WJ-HD300A Series, WJ-RT41) *Connection with the WJ-RT41 is a plan for future. Alarm Alarm Source Total up to 1,024 consists of followgs Termal puts x 1,024 alarm x 512 Video loss alarm x 512 Serial alarm x 1,024 (Total of termal put and output is 1,024) Supports one state put mode. Number of Alarm Programs 1,024 Alarm Outputs Up to 25 (Termals), Trigger: Active/ACK/RESET Alarm Control Ack (Auto/Manual), Reset (Auto/Manual), All reset, Arm, Disarm Alarm Action Up to10 actions cludg spot, Tour SEQ, Group SEQ and Text Alarm Target Up to 4 targets, Up to 4 monitors a target. Multi-Alarm Mode SEQ/HOLD Alarm Log Up to 30 days and 500KB x 99 files per day. Alarm Schedule Possible by Timer Event Functions Partitiong Controller-Area, Monitor, view, cont, G-SEQ, Alarm, Alarm I/O, Recorder. Operator-Controller. Monitor-. Priority 0 ~ 5,534 for Operator, Controller, Alarm and Timer event Sequence Tour Sequence; 128 patterns, 4 steps, Logical No. 1 ~ 9,999 ; 128 patterns with 4 monitors, Logical No. 1 ~ 9,999 ; 128 patterns, 4 steps, Logical No. 1 ~ 9,999 Dwell Time; Up to 8,339 seconds Timer Events 1,024 ( Spot, Tour SEQ,, Group SEQ, Alarm, Mode change) Area 4 Redundant CPU Supported Setup Method Adm software (English) Operator No. of Registration 512 Level Class setup 1 ~ 1 Priority 0 ~ 5,534 Operator Log/System 4 Admistrator No. of Registration 128 Level 1 ~ 4 Control PTZ Up to 4 steps (dependg on the Iris N/CLOSE/RESET camera model) Focus FAR/NEAR/AUTO Wiper ON (Keep pressg) Defroster ON/OFF Preset Positions Up to 255 Preset Positions Setup Menu ON/OFF Auto Mode Auto Pan, SEQ, Sort, Patrol B/W Colour/BW/AUTO1/AUTO2 AUX AUX 1/2 ON/OFF Function Number 1 ~ 25 OSD Service Time Date Time: 12/24H, Date: 10 formats Title 28 alpha-numeric characters Alarm Title 18 alpha-numeric characters Status System, Video loss, Alarm Customizable Characters 32 Log Alarm (100), Video loss (100) Log Log by Adm Software Switchg, Operator, Alarm, Video loss, Adm setup MATRIX SYSTEM50 PRODUCT COMPONENTS Matrix Switcher WJ-SX50 Video Input Board WJ-PB5C32 Network Board WJ-PB5E01 Digital Disk Recorders WJ-HD31A (1ch) WJ-HD309A (9ch) Ethernet System Controller with 3D-Joystick & Jog/Shuttle Card Cage WJ-SX50U Video Output Board WJ-PB5M1 D-sub/BNC Video Cable WJ-CA8 (0.5 m) Expansion Cable Kit WJ-CA5L20K (2 m) WJ-CA5L07K (0.7 m) Central Processg Unit Upgrade Software WJ-ASC90 Trademarks and registered trademarks Microsoft, and Wdows are registered trademarks of Microsoft Corporation the U.S. and other countries. Important Safety Precaution: carefully read the operatg structions and stallation manual before usg this product. Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. All TV pictures are simulated. s and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations. DISTRIBUTED BY: Prted Japan (2N-781A)