Anexa nr. 1 la Hotărîrea nr. 46 din Standarde moldovene adoptate

Size: px
Start display at page:

Download "Anexa nr. 1 la Hotărîrea nr. 46 din Standarde moldovene adoptate"

Transcription

1 Anexa nr. 1 la Hotărîrea nr. 46 din # Indicativul standardului moldovean Titlul standardului în limba română 1 SM EN 124-1:2016 de închidere pentru cămine scurgere în zone carosabile şi pietonale. Partea 1: Definiţii, clasificare, principii generale de proiectare, cerinţe de performanţă şi metode de încercare Titlul standardului în limba rusă Решетки и люки для проезжих и пешеходных зон. Часть 1: Определения, классификация, общие принципы конструкции, требования к эксплуатационным характеристикам и методы испытания Titlul standardului în limba engleză Data adoptării standardului Indicativul standardului ICS1 ICS2 ICS3 european preluat Indicativul standardului moldovean înlocuit pedestrian areas. Part 1: Definitions, classification, general principles of design, performance requirements and test methods EN 124-1: SM SR EN Data din care se anulează standardul înlocuit 2 SM EN 124-2:2016 Решетки и люки de închidere pentru cămine şi pietonale. Partea 2: 2: Решетки и люки de închidere pentru cămine из литейного чугуна scurgere de fontă pedestrian areas. Part 2: tops made of cast iron EN 124-2: SM SR EN 3 SM EN 124-3:2016 Решетки и люки de închidere pentru cămine şi pietonale. Partea 3: 3: Решетки и люки de închidere pentru cămine из стали или алюминиевых сплавов scurgere de oţel sau aliaje de aluminiu pedestrian areas. Part 3: tops made of steel or aluminium alloys EN 124-3: SM SR EN

2 Anexa nr. 1 la Hotărîrea nr. 46 din 4 SM EN 124-4:2016 Решетки и люки de închidere pentru cămine şi pietonale. Partea 4: 4: Решетки и люки de închidere pentru cămine из сталежелезобетона scurgere de beton armat cu oţel pedestrian areas. Part 4: tops made of steel reinforced concrete EN 124-4: SM SR EN 5 SM EN 124-5:2016 Решетки и люки de închidere pentru cămine şi pietonale. Partea 5: 5: Решетки и люки de închidere pentru cămine из композиционных материалов scurgere de materiale compozite pedestrian areas. Part 5: tops made of composite materials EN 124-5: SM SR EN 6 SM EN 124-6:2016 Решетки и люки de închidere pentru cămine şi pietonale. Partea 6: 6: Решетки и люки de închidere pentru cămine из полипропилена (PP), scurgere de polipropilenă (PP), polietilenă (PE) sau policlorură de vinil полиэтилена (PE) или непластифицированног о поливинилхлорида (PVC-U) neplastifiată (PVC-U) pedestrian areas. Part 6: tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) EN 124-6: SM SR EN

3 Anexa nr. 1 la Hotărîrea nr. 46 din 7 SM EN :2016 Staţii de pompare a apelor terenuri. Partea 1: Staţii de pompare pentru ape uzate cu materii fecale застройки. Часть 1: Насосные установки для, содержащих фекальные загрязнения 1: Lifting plants for wastewater containing faecal matter EN :2015 1: SM EN :2016 Staţii de pompare a apelor terenuri. Partea 2: Staţii de pompare pentru ape uzate fără materii fecale застройки. Часть 2: Насосные установки для, не содержащих фекальные загрязнения 2: Lifting plants for faecalfree wastewater EN :2015 2: SM EN :2016 Staţii de pompare a apelor terenuri. Partea 3: Staţii de pompare cu aplicare limitată застройки. Часть 3: Насосные установки с ограниченной областью применения 3: Lifting plants for limited applications EN :2015 3: SM EN :2016 Staţii de pompare a apelor terenuri. Partea 4: Robinet de reţinere pentru ape uzate cu materii fecale şi fără materii fecale застройки. Часть 4: Обратные клапаны для сточных вод, содержащих и не содержащих фекальные загрязнения 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter EN :2015 4:2010

4 Anexa nr. 1 la Hotărîrea nr. 46 din 11 SM EN 12057:2016 Produse de piatră naturală. Plăci modulare. Cerinţe Изделия из природного камня. Модульные плитки. Требования Natural stone products. Modular tiles. Requirements EN 12057: SM SR EN 12057: SM EN 12058:2016 Produse de piatră naturală. Plăci pentru pardoseli şi scări. Cerinţe Изделия из природного камня. Плиты для пола и лестниц. Требования Natural stone products. Slabs for floors and stairs. Requirements EN 12058: SM SR EN 12058: SM EN 12120:2016 Produse chimice utilizate pentru tratarea apei destinate consumului uman. Hidrogenosulfit de sodiu Химикаты, используемые для обработки воды, предназначенной для потребления человеком. Гидросульфит натрия Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite EN 12120: SM SR EN 12120: SM EN 12123:2016 Produse chimice utilizate pentru tratarea apei destinate consumului uman. Sulfat de amoniu Химикаты, используемые для обработки воды, предназначенной для потребления человеком. Сульфат аммония Chemicals used for treatment of water intended for human consumption. Ammonium sulfate EN 12123: SM SR EN 12123: SM EN 12126:2016 Produse chimice utilizate pentru tratarea apei destinate consumului uman. Amoniac lichefiat Химикаты, используемые для обработки воды, предназначенной для потребления человеком. Жидкий аммиак Chemicals used for treatment of water intended for human consumption. Liquefied ammonia EN 12126: SM SR EN 12126: SM EN :2016 Sticlă pentru construcţii. Geam de securitate de sticlă silico-calco-sodică securizat termic. Partea 1: Definiţii şi descriere Стекло в строительстве. Термически закаленное натрий-кальцийсиликатное безопасное стекло. Часть 1: Определения и описание Glass in building. Thermally toughened soda lime silicate safety glass. Part 1: Definition and description EN : SM SR EN :2013

5 Anexa nr. 1 la Hotărîrea nr. 46 din 17 SM EN 12182:2016 Produse de asistare pentru persoane cu dizabilităţi. Cerinţe generale şi metode de încercare Вспомогательные технические средства для людей с ограниченными возможностями. Общие требования и методы испытания Assistive products for persons with disability. General requirements and test methods EN 12182: SM SR EN 12182: SM EN 12186:2016 Infrastructura pentru gaze. Staţii de reglare a presiunii gazelor pentru transport şi distribuţie. Cerinţe funcţionale Инфраструктура газовая. Станции регулирования давления газа для транспортирования и распределения газа. Функциональные требования Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements EN 12186: SM SR EN 12186: SM EN 12217:2016 Uşi. Forţe de acţionare. Cerinţe şi clasificare Двери. Воздействующие силы. Требования и классификация Doors. Operating forces. Requirements and classification EN 12217: SM SR EN 12217: SM EN 12268:2016 Maşini pentru industria alimentară. Ferăstraie cu bandă. Cerinţe de securitate şi igienă Машины для пищевой промышленности. Ленточныe пилы. Требования безопасности и гигиены Food processing machinery. Band saw machines. Safety and hygiene requirements EN 12268: SM SR EN A1: SM EN 12277:2016 Echipament de alpinism şi escaladare. Centură complexă. Cerinţe de securitate şi metode de încercare Снаряжение для альпинизма. Ремни привязные. Требования безопасности и методы испытания Mountaineering equipment. Harnesses. Safety requirements and test methods EN 12277: SM SR EN 12277: SM EN :2016 Aparate de sorbţie pentru încălzire şi/sau răcire care utilizează combustibili gazoşi cu debit caloric care nu depăşeşte 70 kw. Partea 1: Termeni şi definiţii Приборы газовые сорбционные для обогрева и/или охлаждения с номинальной тепловой мощностью до 70 kw. Часть 1: Термины и определения Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw. Part 1: Terms and definitions EN : SM SR EN :2011

6 Anexa nr. 1 la Hotărîrea nr. 46 din 23 SM EN :2016 Aparate de absorbţie care utilizează combustibili gazoşi pentru încălzire şi/sau răcire avînd debitul caloric care nu depăşeşte 70 kw. Partea 2: Securitate Приборы газовые сорбционные для обогрева и/или охлаждения с номинальной тепловой мощностью до 70 kw. Часть 2: Безопасность Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw. Part 2: Safety EN : SM SR EN : SM EN 12331:2016 Maşini pentru industria Машины для пищевой alimentară. Maşini de tocat промышленности. carne. Cerinţe de securitate Мясорубки. Требования şi igienă безопасности и гигиены Food processing machinery. Mincing machines. Safety and hygiene requirements EN 12331: SM SR EN A2: SM EN 12368:2016 Echipament pentru dirijarea traficului. Semafoare Оборудование для регулирования дорожного движения. Светофоры Traffic control equipment. Signal heads EN 12368: SM SR EN 12368:2010

Anexa nr. 1 la Hotărârea nr. 236 din Standarde moldovenești adoptate

Anexa nr. 1 la Hotărârea nr. 236 din Standarde moldovenești adoptate # Indicativul standardului moldovenesc română rusă engleză Data adoptării standardului Indicativul standardului ICS1 ICS2 ICS3 european preluat Indicativul standardului moldovenesc înlocuit Data din care

More information

Anexa nr. 1 la Hotărîrea nr. 303 din Standarde moldovene adoptate

Anexa nr. 1 la Hotărîrea nr. 303 din Standarde moldovene adoptate # Indicativul moldovean Titlul în limba română Titlul în limba rusă Titlul în limba engleză Data adoptării Indicativul român preluat ICS1 ICS2 ICS3 Indicativul moldovean înlocuit Data din care se anulează

More information

Anexa nr. 1 la Hotărîrea nr. 105 din Standarde moldovene adoptate

Anexa nr. 1 la Hotărîrea nr. 105 din Standarde moldovene adoptate Anexa nr. 1 la Hotărîrea nr. 105 din # Indicativul standardului moldovean Titlul standardului în limba română Titlul standardului în limba rusă Titlul standardului în limba engleză Data adoptării standardului

More information

Application of European functional gas standards in WestMoldovatransgaz 市场调研讨论 ( ) Engineer-metrologist, SE WestMoldovatransgaz Ms.

Application of European functional gas standards in WestMoldovatransgaz 市场调研讨论 ( ) Engineer-metrologist, SE WestMoldovatransgaz Ms. Application of European functional gas standards in WestMoldovatransgaz 市场调研讨论 (20120405) Engineer-metrologist, SE WestMoldovatransgaz Ms. Kirilov Ana Introduction Legislative framework on natural gas

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Mai 2015 SRO Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Martie 2017 Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

FORENSIC ERGONOMICS IN ROMANIA Forensic Ergonomics consultants are usually involved in cases where it is suspected that damages, injury or death resul

FORENSIC ERGONOMICS IN ROMANIA Forensic Ergonomics consultants are usually involved in cases where it is suspected that damages, injury or death resul International Journal of Criminal Investigation Volume 1 Issue 3 109-113 FORENSIC ERGONOMICS IN ROMANIA Abstract Octavian CIOBANU, Gr.T.Popa University of Medicine and Pharmacy, Iași (oct.ciobanu@gmail.com)

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/CASCO COMITETUL DE EVALUARE A CONFORMITĂŢII in-pipe noise source characteristics for a ship-used pump ISO/IEC DIS 17025 General requirements

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/IEC JTC 1 TEHNOLOGIA INFORMAŢIEI ISO/IEC 14496-10/DAmd 1 Additional supplemental enhancement information ISO/IEC 14496-12/DAmd 1 Compact

More information

DEVELOPMENT OF THE TEST METHODS OF THE CONVEYOR BELTS USED IN ENVIRONMENTS ENDANGERED BY EXPLOSION HAZARDS

DEVELOPMENT OF THE TEST METHODS OF THE CONVEYOR BELTS USED IN ENVIRONMENTS ENDANGERED BY EXPLOSION HAZARDS DEVELOPMENT OF THE TEST METHODS OF THE CONVEYOR BELTS USED IN ENVIRONMENTS ENDANGERED BY EXPLOSION HAZARDS Ph.D.Eng. Florin Adrian PĂUN INCD INSEMEX Petroşani, insemex@insemex.ro Ph.D.Eng. Mihaela PĂRĂIAN

More information

Activitățile de acreditare ale RENAR

Activitățile de acreditare ale RENAR Activitățile de acreditare ale RENAR reprezintă domeniile pentru care RENAR are competența de a furniza servicii de acreditare. RENAR șia definit activitățile de acreditare în conformitate cu domeniul

More information

DOOR TESTING PROCEDURE FOR THE DETERMINATION OF QUALITY

DOOR TESTING PROCEDURE FOR THE DETERMINATION OF QUALITY 4 th Research/Expert Conference with International Participations QUALITY 2005, Fojnica, B&H, November 09 12, 2005. DOOR TESTING PROCEDURE FOR THE DETERMINATION OF QUALITY Virgil Grecu, Ph. D, Asoc.Professor

More information

Standardizare pentru Smart City

Standardizare pentru Smart City Standardizare pentru Smart City Standardizarea influenţează pozitiv dezvoltarea oraşelor inteligente, sub rezerva aplicării standardelor europene şi internaţionale adecvate. În acest context, se disting

More information

(Notices) EUROPEAN COMMISSION

(Notices) EUROPEAN COMMISSION 25.6.2010 Official Journal of the European Union C 167/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

Data încetării prezumţiei de conformitate a standardului înlocuit Tip Indicativ standard Titlu standard Standard înlocuit

Data încetării prezumţiei de conformitate a standardului înlocuit Tip Indicativ standard Titlu standard Standard înlocuit 14.06.2017 Standarde române care adoptă standarde europene privind echipamentele tehnice sub incidenţa directivei MD 2006/42/EC conform OJ C 183 din 2017-06-09 Tip Indicativ standard Titlu standard Standard

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/TMBG CONSILIUL DE MANAGEMENT TEHNIC ISO/IEC DIS 80079-34 Explosive atmospheres -- Part 34: Application of quality systems for ex product

More information

RENAR Accreditation Activities

RENAR Accreditation Activities RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Decembrie 2016 CUPRINS Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03) C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Mai 2016 CUPRINS SRO Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie

More information

Standard Name Standard number Adopted standard

Standard Name Standard number Adopted standard 5 September 2014 SII-IMQ Agreement Categories and Standards List Audio/video equipment (TRON) Office & Data equipment (OFF) Medical equipment (MED) Measurement equipment (MEAS) Household and similar equipment

More information

ORGANISMUL NAȚIONAL DE STANDARDIZARE.

ORGANISMUL NAȚIONAL DE STANDARDIZARE. ORGANISMUL NAȚIONAL DE STANDARDIZARE www.asro.ro Definiție formulată în cadrul ITU A smart sustainable city is an innovative city that uses information and communication technologies (ICTs) and other means

More information

(Text with EEA relevance) (2013/C 186/02) (1) (2) (3) (4) (5) EN 1:1998/A1:2007 Note EN 40-4:2005/AC:

(Text with EEA relevance) (2013/C 186/02) (1) (2) (3) (4) (5) EN 1:1998/A1:2007 Note EN 40-4:2005/AC: C 186/24 Official Journal of the European Union 28.6.2013 Commission communication in the framework of the implementation of Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws,

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) 9.3.2018 EN Official Journal of the European Union C 92/139 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 267/04)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 267/04) C 267/16 EN Official Journal of the European Union 11.8.2017 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Martie 2016 SRO Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) C 54/80 EN Official Journal of the European Union 13.2.2015 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Februarie 2018 CUPRINS Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie

More information

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULEINUL SNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Decembrie 2017 CUPRINS SRO Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Iulie 2017 SRO Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Mai 2017 Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

Nr. Înreg. Reg. Comerţului: J40/6948/1998 C.U.I.: RO IBAN: RO15 RZBR Raiffeisen Bank Agentia Chitila

Nr. Înreg. Reg. Comerţului: J40/6948/1998 C.U.I.: RO IBAN: RO15 RZBR Raiffeisen Bank Agentia Chitila JOVIS 98 TRADING A HEATING COMPANY Nr. Înreg. Reg. Comerţului: J40/6948/1998 C.U.I.: RO10856567 IBAN: RO15 RZBR 0000 0600 1606 56 Raiffeisen Bank Agentia Chitila STAFOR BOILERE ELECTRICE CU IONIZARE INOVAȚIE

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 076/05)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 076/05) C 76/32 EN Official Journal of the European Union 10.3.2017 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Octombrie 2015 SRO Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Iulie 2016 Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE IULTCS UNIUNEA INTERNAŢIONALĂ A SOCIETĂŢILOR TEHNICIENILOR ŞI CHIMIŞTILOR PIELARI ISO/DIS 4045 Leather -- Chemical tests -- Determination

More information

Indicativ standard Titlu standard Standard înlocuit

Indicativ standard Titlu standard Standard înlocuit 19.05.2016 Standarde române ce adoptă standarde europene armonizate referitoare la dispozitivele medicale sub incidenţa directivei MDD 93/42/EEC în conformitate cu OJ C 173 din 2016-05-13 Indicativ standard

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULEINUL SNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Noiembrie 2017 SRO Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Iulie 2015 SRO Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

Window and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation

Window and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation Window and Door Standards for Performance and Security Russell Day Senior Technical Officer Glass and Glazing Federation The Standards BS EN 14351-1:2006+A2:2016 Windows and doors. Product standard, performance

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/IEC JTC 1 TEHNOLOGIA INFORMAŢIEI ISO/IEC DIS 19479 Information technology for learning, education, and training -- Learner mobility

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Ianuarie 2018 CUPRINS Direcţia Comercială Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

QoS Parameter Measurements based on fixed Data Transfer Times ETSI TR V1.1.1 (2009-

QoS Parameter Measurements based on fixed Data Transfer Times ETSI TR V1.1.1 (2009- 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 ETSI TS 102 250-1 V2.2.1 (2011-04) Speech and multimedia Transmission Quality (STQ); QoS aspects for popular services in mobile networks;

More information

Data încetării prezumţiei de conformitate a standardului înlocuit. Indicativ standard Titlu standard Standard înlocuit

Data încetării prezumţiei de conformitate a standardului înlocuit. Indicativ standard Titlu standard Standard înlocuit 23.05.2017 Standarde române care adoptă standarde europene armonizate privind echipamente terminale de telecomunicaţii şi recunoaşterea mutuală a conformităţii acestora sub incidenţa directivei RTTE 2014/53/EU

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity certification Presley Way Crownhill Milton Keynes MK8 0ES Contact: Tracie Hunter Tel: +44 (0)1908 267300 Fax: +44 (0)1908 267255 E-Mail: mail@basec.org.uk

More information

Nr. Standard reference

Nr. Standard reference Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment

More information

Data încetării prezumţiei de conformitate a standardului înlocuit. Indicativ standard Titlu standard Standard înlocuit

Data încetării prezumţiei de conformitate a standardului înlocuit. Indicativ standard Titlu standard Standard înlocuit 03.01.2018 Standarde române care adoptă standarde europene armonizate privind echipamente terminale de telecomunicaţii şi recunoaşterea mutuală a conformităţii acestora sub incidenţa directivei RTTE 2014/53/EU

More information

OFERTA ECHIPAMENTE SI ACCESORII IGIENICO-SANITARE PENTRU INDUSTIA ALIMENTARA LAVOAR ANKELMAN TECH

OFERTA ECHIPAMENTE SI ACCESORII IGIENICO-SANITARE PENTRU INDUSTIA ALIMENTARA LAVOAR ANKELMAN TECH 30.10.2013 ANKELMAN TECH LAVOAR DESCRIERE SanTec SMART Baterie electronica pentru lavoar SanTec SMART actionare cu senzor, cu posibilitatea mixajului apei, temperatura maxima 70 C, trafic intens. Produs

More information

CEN System - Delegated Decisions Dispatch 14:2017

CEN System - Delegated Decisions Dispatch 14:2017 2017-04-03 Page 1 CEN System - Delegated Decisions Dispatch 14:2017 1 CEN/TC 33... 1 2 CEN/TC 52... 4 3 CEN/TC 53... 5 4 CEN/TC 72... 6 5 CEN/TC 123... 7 6 CEN/TC 129... 8 7 CEN/TC 155... 11 8 CEN/TC 161...

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE IIW INSTITUTUL INTERNAŢIONAL DE SUDURĂ ISO/DIS 3690 Welding and allied processes -- Determination of hydrogen content in arc weld metal

More information

ANTEC SUSTAINABILITY OF PVC (VINYL) PIPE: A COMPREHENSIVE ENVIRONMENTAL REVIEW. May 9, 2017

ANTEC SUSTAINABILITY OF PVC (VINYL) PIPE: A COMPREHENSIVE ENVIRONMENTAL REVIEW. May 9, 2017 SUSTAINABILITY OF PVC (VINYL) PIPE: A COMPREHENSIVE ENVIRONMENTAL REVIEW ANTEC May 9, 2017 PRESENTED BY: Randel Dobbs, P.E., R.P.L.S. Regional Engineer SPE ANTEC Anaheim 2017 / 2556 THE PURPOSE OF THE

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/IEC JTC 1 ISO/IEC 9594-1:2014/DA2 ISO/IEC 9594-2:2014/DA2 ISO/IEC 9594-3:2014/DA2 ISO/IEC 9594-6:2014/DA2 ISO/IEC 9594-8:2014/DA2 TEHNOLOGIA

More information

THERMAL ANALYSIS OF TANKLESS HEATING SYSTEM

THERMAL ANALYSIS OF TANKLESS HEATING SYSTEM BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI Publicat de Universitatea Tehnică Gheorghe Asachi din Iaşi Volumul 64 (68), Numărul 2, 2018 Secţia ELECTROTEHNICĂ. ENERGETICĂ. ELECTRONICĂ THERMAL ANALYSIS OF

More information

RAGAGEP: Codes, Standards, and Good Engineering Practice PETER THOMAS, P.E. PRESIDENT AND ENGINEER RESOURCE COMPLIANCE

RAGAGEP: Codes, Standards, and Good Engineering Practice PETER THOMAS, P.E. PRESIDENT AND ENGINEER RESOURCE COMPLIANCE RAGAGEP: Codes, Standards, and Good Engineering Practice PETER THOMAS, P.E. PRESIDENT AND ENGINEER RESOURCE COMPLIANCE PTHOMAS@RESOURCECOMPLIANCE.COM Introduction PSM RAGAGEP References Title 29 1910.119(d)(3)(ii)

More information

1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications

1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications 1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications Product type Application Specification Appliances Bedpan

More information

РЕФЕРАТ ПО ТЕMЕ: ОБОРУДОВАНИЕ ОВОЩЕХРАНИЛИЩА OVERWIEW ON THE TOPIC: STORAGE EQUIPMENT

РЕФЕРАТ ПО ТЕMЕ: ОБОРУДОВАНИЕ ОВОЩЕХРАНИЛИЩА OVERWIEW ON THE TOPIC: STORAGE EQUIPMENT УДК 811.11 РЕФЕРАТ ПО ТЕMЕ: ОБОРУДОВАНИЕ ОВОЩЕХРАНИЛИЩА Сопшин В.А. ФГБОУ ВО Костромская ГСХА, Кострома. Кострома, Россия. (156530, Костромская область, Костромской район, п. Караваево,Караваевская с/а,

More information

STS Directory Accreditation number: STS 0021

STS Directory Accreditation number: STS 0021 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 LPM AG Labor für Prüfung und Materialtechnologie Tannenweg 10 5712 Beinwil am See Head: Responsible for MS: Ruedi Herren

More information

Snapshot of the current situation for standards to be cited in the OJ under the CPD

Snapshot of the current situation for standards to be cited in the OJ under the CPD Snapshot of the current situation for standards to be cited in the OJ under the CPD Summary: Concerned Standards: 490 * Approved ENs Available Standards cited in the OJ: 120 ** Available Standards not

More information

EuroPEK Roo Oil Separator

EuroPEK Roo Oil Separator www.wavin-labko.fi WAVIN-LABKO LTD Labkotie 1 FIN-36240 KANGASALA Tel: +358 20 1285 270 Fax: +358 20 1285 280 E-mail: tanks@wavin-labko.fi 01/04 EuroPEK Roo Oil Separator Instructions for Installation,

More information

Vibratory and Centrifugal Surface Finishing Machinery and Systems

Vibratory and Centrifugal Surface Finishing Machinery and Systems Finishing For The World Vibratory and Centrifugal Surface Finishing Machinery and Systems Round and Trough Vibratory Machines Continuous and Linked Automation Systems Centrifugal Disc Finishing Machines

More information

standard Standard number Adopted standard MATTERESSES AND BUMPERS FOR INFANT'S

standard Standard number Adopted standard MATTERESSES AND BUMPERS FOR INFANT'S 5 September 2014 SII TUV RH List of Categories and Standards Audio/video equipment (TRON) Office & Data equipment (OFF) Medical equipment (MED) Measurement equipment (MEAS) Household and similar equipment

More information

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES Official Journal of the European Union C 378 English edition Information and Notices Volume 58 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

More information

Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012

Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-13119-01-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 18.09.2017 to 07.11.2018 Holder of certificate: IMA

More information

BULETINUL STANDARDIZĂRII

BULETINUL STANDARDIZĂRII SRO BULETINUL STNDRDIZĂRII Publicaţie oficială a Organismului Naţional de Standardizare Iunie 2016 Direcţia Publicaţii Director Diana Dorobanţu Redactare şi tehnoredactare: Serviciul Producţie Management

More information

BEIER MACHINERY SRL-Z MIXING UNIT BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO.

BEIER MACHINERY SRL-Z MIXING UNIT BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO. BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO., LTD FT1705172 SRL-Z800/ 2000L Mixing Unit Instruction Book Page 1 of 11 Preface Thank you for using our product,

More information

(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.

(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur. First Revision No. 1-NFPA 501-2015 [ Section No. 5.3.1.3 ] 5.3.1.3 The following conditions shall be met when an interior finish material is tested using the test protocol of NFPA 286, Standard Methods

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE ISO/CASCO COMITETUL DE EVALUARE A CONFORMITĂŢII ISO/IEC DIS 17021-3 Conformity assessment -- Requirements for bodies providing audit and

More information

(Information) COMMISSION. (Text with EEA relevance)

(Information) COMMISSION. (Text with EEA relevance) 14.12.2005 EN Official Journal of the Union C 319/1 I (Information) COMMISSION Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on

More information

Project Name and Number: UNDP/GEF Project No Improving Energy Efficiency in Residential Buildings in the Republic of Belarus

Project Name and Number: UNDP/GEF Project No Improving Energy Efficiency in Residential Buildings in the Republic of Belarus TERMS OF REFERENCE for Execution of Pre-Commissioning Works on Energy-Efficient Engineering Systems in Multi-Storey Residential Buildings under Construction Project Name and Number: UNDP/GEF Project No.00077154

More information

GEPRO PROTECTIA LA INCENDIU

GEPRO PROTECTIA LA INCENDIU GEPRO PROTECTIA LA INCENDIU GEPRO AGENTI DE STINGERE PENTRU AEROPORTURI ICAO International Civil Aviation Organization Doc 9137 AN/898 AIRPORT SERVICES MANUAL PART 1 RESCUE AND FIRE FIGHTING Fourth Edition

More information

Analysis of the Inertial Parameters of Fire Detectors

Analysis of the Inertial Parameters of Fire Detectors Analysis of the Inertial Parameters of Fire Detectors Vladimirs Jemeljanovs 1, Jelena Sulojeva 2, Janis Bartusauskis 3, 1-3 Riga Technical University Abstract: The article Analysis of the Inertial Parameters

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE IULTCS UNIUNEA INTERNAŢIONALĂ A SOCIETĂŢILOR TEHNICIENILOR ŞI CHIMIŞTILOR PIELARI ISO/DIS 20701 Leather -- Tests for colour fastness --

More information

Number of colours: 1. Flame-retardant properties: Additional use: Care: Washing (length shrinkage): 0.5% Dry cleaning (length shrinkage): 0.

Number of colours: 1. Flame-retardant properties: Additional use: Care: Washing (length shrinkage): 0.5% Dry cleaning (length shrinkage): 0. LASER NORMA V Textile vertical blind; Cut ovals, in a haphazard arrangement are scattered across vertical fabric strips. The design assumes a dreamy, playful note. It is available on Irolo art. nr. 0010504

More information

ISO/TS TECHNICAL SPECIFICATION

ISO/TS TECHNICAL SPECIFICATION Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance

More information

Operating instructions

Operating instructions Operating instructions This handbook assumes that the reader and/ or operator is competent in the operation of chemical dosing systems and fully understands the inherent risks associated with the handling

More information

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested

More information

Anti frost. Snow Melting USA 2012 USA 2014

Anti frost. Snow Melting USA 2012 USA 2014 Anti frost USA 2014 USA 2012 1 Mat Resistance Wires Reinforced Braide PVC Jacketing Super strong aramid FEP Mat DomoTecK s Mat is the ideal heating element for outdoor de-icing. Our snow melting mat prevents

More information

Kamrörsradiator Ribbed pipe radiator Oребренные трубчатые радиаторы Radiateurs à ailettes Rippenheizkörper

Kamrörsradiator Ribbed pipe radiator Oребренные трубчатые радиаторы Radiateurs à ailettes Rippenheizkörper Original instructions Kamrörsradiator Ribbed pipe radiator Oребренные трубчатые радиаторы Radiateurs à ailettes Rippenheizkörper SE... 8 GB... 10 RU... 12 FR... 14 DE... 16 Kamrörsradiator / Ribbed pipe

More information

Hand pump JP-02. Hand pump JP-02 for acids, alkalies and water-based chemicals. depending on lever position. The telescopic suction tube is adjustable

Hand pump JP-02. Hand pump JP-02 for acids, alkalies and water-based chemicals. depending on lever position. The telescopic suction tube is adjustable Hand pump JP-02 Hand pump JP-02 for acids, alkalies and water-based chemicals Shaft: Stainless steel 316 Ti Seals: Viton Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position from 340 to 900

More information

protection Constant wattage heating cables Self-regulating heating cables Temperature controllers

protection Constant wattage heating cables Self-regulating heating cables Temperature controllers snow & ice protection Constant wattage heating cables Self-regulating heating cables Temperature controllers Protection of roofs, gutters and downpipes Snow and ice protection systems protect against:

More information

European Technical Assessment ETA-00/0003 of 03/06/2016

European Technical Assessment ETA-00/0003 of 03/06/2016 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information

PI System as an Aid for Prevention and Control of Pollution

PI System as an Aid for Prevention and Control of Pollution PI System as an Aid for Prevention and Control of Pollution Presented by Michele Albicocchi Copyri g h t 2013 S olvay Chimica Italia & OSIso f t, LLC. PI System as an Aid for Prevention and Control of

More information

Series VUT PW EC. wool internal heat and sound-insulating layer for VUT PE/PW 350, 600, 1000 units and 50 mm for VUT PE/PW 200, 3000 units.

Series VUT PW EC. wool internal heat and sound-insulating layer for VUT PE/PW 350, 600, 1000 units and 50 mm for VUT PE/PW 200, 3000 units. AIR HANDLING UNITS WITH HEAT RECOVERY Series VUT PE EC Series SAS908 control panel SAS908 control panel Ceiling mounted energy saving Air Handling Units (AHU) with the air capacity up to 4000 m 3 /h and

More information

Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)

Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009) Nr. Standard reference Title 1 EN 12572-1:2017 2 EN 16584-2:2017 3 EN 16584-1:2017 4 EN 16584-3:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection

More information

GEOSYNTHETICS ENGINEERING: IN THEORY AND PRACTICE

GEOSYNTHETICS ENGINEERING: IN THEORY AND PRACTICE GEOSYNTHETICS ENGINEERING: IN THEORY AND PRACTICE Prof. J. N. Mandal Department of Civil Engineering, IIT Bombay, Powai, Mumbai 400076, India. Tel.022-25767328 email: cejnm@civil.iitb.ac.in Module - 2

More information

Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017

Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 Nr. Standard reference Title 1 CEN Guide 16:2017 Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 The concept of Partnership with European Organisations

More information

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE

PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE PROIECTE DE STANDARDE INTERNAŢIONALE ISO SUPUSE ANCHETEI PUBLICE IULTCS UNIUNEA INTERNAŢIONALĂ A SOCIETĂŢILOR TEHNICIENILOR ŞI CHIMIŞTILOR PIELARI ISO/DIS 18218-2 Leather -- Determination of ethoxylated

More information

Sekamatik series PREFABRICATED LIFTING STATIONS FOR RESIDENTIAL, COMMERCIAL OR INDUSTRIAL APPLICATIONS

Sekamatik series PREFABRICATED LIFTING STATIONS FOR RESIDENTIAL, COMMERCIAL OR INDUSTRIAL APPLICATIONS Sekamatik series PREFABRICATED LIFTING STATIONS FOR RESIDENTIAL, COMMERCIAL OR INDUSTRIAL APPLICATIONS Wastewater is a demanding process, performance, day in day out. Xylem challenges, providing trusted

More information

Control unit PPT/RS,, Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and contr

Control unit PPT/RS,, Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and contr Control unit PPT/RS,, 0111636 Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and control unit is 10 metres when feed pressure is 0.6 MPa.

More information

SOUTHEAST TEXAS CONTINUING EDUCATION ENGINEERING USE OF GEOTEXTILES

SOUTHEAST TEXAS CONTINUING EDUCATION ENGINEERING USE OF GEOTEXTILES EXAM No.111 ENGINEERING USE OF GEOTEXTILES 1. Which is not a use of geotextiles? A. Erosion control. B. Sediment control. C. Concrete reinforcement. D. Filtration. 2. The most common materials used in

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity certification Rossmore Business Park Ellesmere Port South Wirral Cheshire CH65 3EN Contact:

More information

PRODUCT SPECIFICATION DRAWING Hydroflame Pro Series Sleeves

PRODUCT SPECIFICATION DRAWING Hydroflame Pro Series Sleeves Cap & Locator Whiskers PRODUCT SPECIFICATION DRAWING Hydroflame Pro Series Sleeves CD Plate (optional) See Dim *"C" (Telescoping) Safety Cap & Locator Whiskers Included (Shown with optional CD Plate) (OSHA

More information

Test Methods and Instrumentation for Assessing Reaction to Fire Properties of Railway Rolling Stock

Test Methods and Instrumentation for Assessing Reaction to Fire Properties of Railway Rolling Stock Problemy Kolejnictwa Zeszyt 160 (2013) 35 Test Methods and Instrumentation for Assessing Reaction to Fire Properties of Railway Rolling Stock Sean GREGORY 1, Stephen J. GRAYSON 2, Suresh KUMAR 3 Summary

More information

CERTIFIED UNDERFLOOR HEATING WITH 15 YEARS GUARANTEE

CERTIFIED UNDERFLOOR HEATING WITH 15 YEARS GUARANTEE Electric underfloor heating Simple to install Cheap to install Simple to regulate Safe to use Maintenance free CERTIFIED UNDERFLOOR HEATING WITH 15 YEARS GUARANTEE WHY CHOOSE HEATCOM? Heatcom is a leading

More information

Standards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date.

Standards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date. SANS 110 (SABS 110) (2017) (2017-11-17) Sealing compounds for the building industry, two-component, polysulphide base Covers two types of elastomeric two-component polysulphide base joint sealing compounds

More information

Comparative Simulation ResultsforEN-54, НПБ 88 and NFPA 72 Standards-the Hallway Case

Comparative Simulation ResultsforEN-54, НПБ 88 and NFPA 72 Standards-the Hallway Case RESEARCH ARTICLE OPEN ACCESS Comparative Simulation ResultsforEN-54, НПБ 88 and NFPA 72 Standards-the Hallway Case RadojeJevtić* PhD in Technical science*, *( School for electrical engineering Nikola Tesla,

More information

ROHDE MACHINERY AND EQUIPMENT HANDMADE.

ROHDE MACHINERY AND EQUIPMENT HANDMADE. ROHDE MACHINERY AND EQUIPMENT 54 HANDMADE. 55 Pottery wheel HMT 500 The HMT 500 has been designed for everyday use in potters workshops. The high-performance ROHDE machine combines modern control and drive

More information

Products Under Mandatory Certification HOUSEHOLD APPLIANCES. Philippine National Standard (PNS) No. PNS IEC :2015 (IEC published 2015)

Products Under Mandatory Certification HOUSEHOLD APPLIANCES. Philippine National Standard (PNS) No. PNS IEC :2015 (IEC published 2015) Products Under Mandatory Certification HOUSEHOLD APPLIANCES 1 Electric fans PNS IEC 60335-2-80:2015 (IEC published 2015) similar electrical appliances Part 2 : Particular requirements for fans Plastic/Metal

More information

Accreditation Schedule

Accreditation Schedule JOINT ACCREDITATION SYSTEM OF AUSTRALIA AND NEW ZEALAND HELPING MARKETS WORK BETTER AUSTRALIA FECCA House, 4 Phipps Close, Deakin, ACT 2600 PO Box 304, Deakin West, ACT 2605 P: +61 (0)2 6232 2000 NEW ZEALAND

More information