IECEx Certificate of Conformity

Size: px

Start display at page:

Download "IECEx Certificate of Conformity"

Vincent Barton
5 years ago
Views:

1 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for ru les and details of the IECEx Scheme visit Certificate No.: Status: Current issue No.:1 j Certificate history:!ssue No. 1 ( ) Issue No. 0 ( ) Date of Issue: Page 1 of 5 Applicant: Siemens AG Ostliche Rheinbruckenstr Karlsruhe Germany Electrical Apparatus: Level sensing pressure transmitter SITRANS LH100 Optional accessory: ' Type of Protection: Intrinsic safety "la" Marking: Ex ia llc T4 Ga Approved for issue on behalf of the IECEx Certification Body: Martin Pluss Position: Signature: (for printed version) Date: 1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website. Certificate issued by: Electrosuisse div. Testing and Certification Luppmenstrasse 1 CH-8320 FEHRAL TORF Switzerland electro su1sse

2 Certificate No.: Date of Issue: Manufacturer: Siemens AG Ostliche Rheinbruckenstr Karlsruhe Germany Issue No.: 1 Page 2 of 5 Additional Manufacturing location (s): This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended. STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC : 2011 Edition: 6.0 IEC : 2011 Edition: 6.0 IEC : Edition: 3.0 Explosive atmospheres - Part 0: General requirements Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety "i" Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in Test Report: CH/SEV/ExTR /01 Quality Assessment Report: DE/TUN/QAR /07

3 Certificate No.: Date of Issue: Issue No.: 1 Page 3 of 5 EQUIPMENT: Schedule Equipment and systems covered by this certificate are as follows: SITRANS LH 100 (7MF1572-*) Junction Box 7MF1572-BAA CONDITIONS OF CERTIFICATION: NO

4 Certificate No.: IECEx Certificate Date of Issue: Issue No.: 1 Page 4 of 5 1 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): Standard changed from IEC (Ed.2) to IEC (Ed.3) This certificate replaces Certificate Issue No.: 0

5 Certificate No.: Date of Issue: Issue No.: 1 Page 5 of 5 Additional information: Annex: Annexe Issue 1.pdf

6 ..,.. electro SUISSe Annexe to: Applicant Name: Electrical Apparatus: Siemens AG Ostliche Rheinbruckenstr. 50, Karlsruhe, GERMANY Level sensing pressure transmitter SITRANS LH100 Issue No.: 1 page 1 of 1 Description The pressure transducer SITRANS LH100 for level measurement, consists of the electronic circuit board, encapsulated together with the ceramic pressure measurement cell in a stainless steel housing. The static pressure at the pressure measurement cell is recorded for pressure measurement. Measurement of absolute pressure as well as relative pressure is possible. The external air pressure is applied through the cable to the sensor for relative pressure measurement when pressure ranges are low. The measuring transducer serves as submersible I immersion sensor. The measurement cell, the housing and the cable are thus exposed to the medium. The voltage signal of the pressure measuring cell is converted into a ratiometric voltage output signal in the transducer's circuitry. A version with a current output signal (4-20 ma) is also available. A temperature dependent voltage output signal is provided optionally. The electrical supply circuit must be a certified, intrinsically-safe circuit with a level of protection "ia". Type reference: SITRANS LH 100 (7MF1572-*) Junction box 7MF1572-8AA The points * in the type reference are replaced by mark of variants, which are defined in the manufacturing respectively in the test documents and in the approval document as well. Ratings: for ratiometer types : Ui = 15 V Ii = 200 ma for 4-20 ma types : Ui = 30 V Ii = 100 ma Pi = 750 mw Pi = 750 mw Ci < 0.5 µf nflm Ci = 0 µf nflm Li = 1.0 µh µhim Li = 0 µh µhim for junction box : Umax = 30V lmax = 200 ma Rated ambient temperature range ( C) -1 O C C for T 4 {EPL Ga} {all Types} E lectros u isse Swiss Certification Body SCI:Sp 03[, Product Certification Fehraltorf, Electrosuisse I Verband for Elektra-, Energie- und lnformationstechnik Luppmenstrasse 1 I Postfach 269 I CH-8320 Fehraltorf IT Iinfo@electrosuisse.chIwww.electrosuisse.ch

IECEx Certificate of Conformity

Page 1 of 10 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate