Installation Manual Premier Elite Series

Transcription

1 Istallatio Maual Premier Elite Series INS176-15

2 Cotets Premier Elite Series Istallatio Maual Cotets Cotets... 2 Commissioig Trouble-Shootig Sstem Overview... 4 Reset ad Service Messages Sstem Architecture... 4 Cotrol Pael Programmig the Cotrol Pael Remote Kepads... 5 Itroductio Zoe Expaders... 6 Copig ad Pastig Output Expaders... 6 Log Off Egieer Commuicators... 6 Resettig the Egieers Code (User 00) Other Devices Zoe Setup Istallatio... 7 Ricochet Eabled Devices V V Istallatio Sequece... 7 Ricochet Eabled Devices V2.10 & Later Power Suppl Ratigs Learig Devices Coectig AC Mais Auto Zoe Tpe & Area Coectig Batteries Deletig Devices EN50131 Batter Istallatio (Polmer Paels) Zoe Tpes Coectig Devices to the Network Zoe Attributes Remote Kepads Zoe Attributes XP-W & 32XP-W V3.xx> Attributes for Momet or Latch Kes XP-W & 32XP-W V2.xx> Attributes for Custom Zoes Sstem Desig Cosideratios Custom Zoes Seismic Attributes* Ricochet V2 & V3 Expader Addressig Zoe Areas 12/24/48/88/ XE Zoe Expader (24 Ol) Zoe Areas XP Zoe Expader Zoe Text Star ad Dais Jumper Optio Zoe Chime iprox Module Remote Test Eable iXD Zoe Expader Zoe Wirig OP16 Output Expader Zoe Groups RM8 Rela Module DD Zoe ad Output Numberig 24/48/88/ Area Programmig Zoe ad Output Numberig Timers Zoe Coectios Armig Modes IXD Zoe Expader Area Arm Suites 24/48/88/ Auxiliar/Fault Coectios Area Arm Suites Speaker Coectios Area Suite Text Exteral Souder Coectios Suite Arm Modes Pael Outputs Area Optios 24/48/88/ Digicom Outputs Area Optios Wire Smoke Detector Time Arm Area Expader Auxiliar Iput Area Text Plug-o Commuicators Global Optios Speech Module Sstem Timers Com GSM Sstem Cofig Premier Elite ComGSM Laout Sstem Optios Aerial Sitig Moitor Hardware Istallatio Cotrol Timers Pael Cofiguratio Sstem Text Usig the SMS Cotrol Commads Part Arm Text What will be set i the Text Message Holida Dates AV Module Speaker Toes ComIP Module PC Output Text Commissioig Custom O/P Text ComWiFi USB-Com Kepad Setup PC-Com Kepad Areas Coectig a Computer Kepad Zoe Mappig Coectig a Priter Kepad Optios Commissioig ad Troubleshootig Kepad Speaker Volume INS176-15

3 Premier Elite Series Istallatio Maual Cotets Kepad Souder Optios User Fuctios ad Optios Expader Setup User Optios User Optios Expader Areas User Cofig Expader Locatio Text User Time Lock Expader Auxiliar Iput User Name Text Expader Speaker Volume Door Cotrol Expader Souder Optios Addig Tags Sstem Outputs Deletig Users Available Outputs Addig SmartKe Programmig Outputs Egieer Utilities Output Group - Not Used View Evet Log Output Group - Sstem Do Bell Test Output Group - Area Do Walk Test 24/48/88/ Output Group - Zoe Do Walk Test Output Group - User Code Etered View Zoe Status Output Group - Cotrol Timer Do Sstem Tests Output Group - PC Cotrol Cofirm Devices Output Group - Door Cotrol View RKP Status Output Attributes View Exp. Status X-10 Outputs Set Sstem Time Custom Outputs Set Sstem Date Zoe Group Outputs Chage Eg. Code UDL/Digi Optios Adjust Volumes Reset Digi Default NVM Data Start Test Call Locatio Text MSN/Pre-Dial No Prit Log Data Program Digi Soak Test Areas 24/48/88/ UPP... Error! Bookmark ot defied. Soak Test Areas Eable Texecom Coect App View id Data Digi Optios Cofigure Radio Area Accouts 12/24/48/88/ Ricochet Diagostics (V2 Ol) Area Accouts Sigallig Test UDL Optios Ecrptio Ke V3.01 & V3.02 ol Setup Modules Programmig Part Arms Com Port Setup Alter Part Arms Premier Elite ComIP Cotrol Pael Programmig Ricochet Lear Witex setup Learig Devices Texecom mobile app's (Not Coect) Access the Lear Meu usig the Omit Hot ke Remote coectio & Push Notificatios Auto Zoe Tpe & Area ARC Settigs & Reportig Optios Deletig Devices Premier Elite ComWiFi Specificatios Cotrol Paels Pael Settigs Remote Kepads Port Forwardig Zoe Expaders Witex setup Output Expaders Texecom Mobile App's Product Variats ad Compliace ARC Settigs & Reportig Optios Stadards Optioal Additioal Pael Settigs Warrat Defaultig the Com WiFi Notes: Chagig the ComWiFi Laguage Notes: DualCom Iside (48 Ol) EMIZON 21 TCD WebWaOe Chiro IRIS Zoe Alarm Reportig Codes Setup Users Default User Codes Programmig New Users User Tpes INS

4 O m i 1 2 abc 3 def 4 ghi 7 pqrs Yes 5 jkl 8 tuv 0 6 mo 9 wxz No Ser vice Omit Chime Part Area Pow er I f o. Read Reset Meu O m it 1 2 abc 3 def 4 ghi 7 pqrs Yes 5 jkl 8 tuv 0 6 mo 9 wxz No Part Ser vice Omit Chime Area Pow er I f o. Read Reset Meu Network No Address Zoes Power Network No Address Zoes Network No Address Zoes Power Power Network No Address Zoes Power Sstem Overview Premier Elite Series Istallatio Maual 1. Sstem Overview Sstem Architecture 4 to 16 Zoes ( Elite 12-W) 8/4 to 24 zoes ( Elite 24/W) 8/4 to 48 Zoes ( Elite 48/W) 4 to 76 Zoes ( Elite 64-W) 8 to 88 Zoes ( Elite 88) 8 to 168 Zoes ( Elite 168) 0 to 640 Zoes ( Elite 640) 8 Zoe Iputs 2 Zoe Iputs 2 kepads ( Elite 12-W) 4 kepads ( Elite 24/W) 4 Kepads ( Elite 48 & 64/W) 8 Kepads ( Elite 88) 16 Kepads ( Elite 168) 64 Kepads ( Elite 640) 1Programmable 2 Zoe 1Programmable 100mA Output Iputs 100mA Output 1 Output Module ( Elite 12** ) 1 Output Module ( Elite 24) 2 Output Modules ( Elite 48 & 64) 4 Output Modules ( Elite 88) 8 Output Modules ( Elite 168) 32 Output Modules( Elite 640) 16 Programmable 100mA Outputs 0 Expaders ( Elite 12) 2 Expaders ( Elite 24) 4 Expaders ( Elite 48 & 64) 8 Expaders ( Elite 88) 16 Expaders ( Elite 168) 64 Expaders ( Elite 640) 8 Zoe Iputs 8 *** Programmable 100mA Outputs Premier Elite 12/24/ 48/ 64/ 88/ 168/640* Premier Speaker Output 8 Programmable 100mA Outputs Speaker Output Auxiliar Iput 5 Programmable Outputs (4 x 500mA & 1 Rela) ( Premier 88, 168 & 640 ol) Bell/Strobe Outputs Bell Tamper Iput Auxiliar Tamper Iput 4 Wire Data Network 1 Additioal 4 Wire Data Network Plug o Digimodem (Com300, Com2400) GSM Module ComIP, ComWiFi***** WebwaOe, Emizo or Chiro Iris Premier LCD/LCDP Premier LCDL/LCDLP Premier Elite LCDLP/SMK/FMK Wire as Network 1 PC ad Modem for Remote Upload/Dowload Modem Premier OP16****** Premier 8XP**** Premier Elite 8XP-W**** 0 Expaders ( Elite 12) 2 Expaders ( Elite 24) 4 Expaders ( Elite 48 ) 8 Expaders ( Elite 64 & 88) 16 Expaders ( Elite 168) 64 Expaders ( Elite 640) Premier Elite 32XP-W**** Alarm Receivig Cetre 0 Expaders ( Elite 12) 1 Expaders ( Elite 24) 1 Expaders ( Elite 48) 2 Expaders ( Elite 64 & 88) 4 Expaders ( Elite 168) 16 Expaders ( Elite 640) PC ad PC-Com for Local Upload/Dowload PC-Com Mobile APP Server Push Notificatios/Arm/Disram * No Oboard Zoes ** 8 Ol o Elite 12 *** 3 Ol o Elite 12 **** Whe mixig wired ad wireless expaders check total zoe capacit for the cotrol pael. *****ComWiFi should ot be used as a primar form of sigallig to a ARC ****** Caot be used at the same address as Wireless expaders ios or Adroid Device Cotrol Pael Premier Elite 24 8 full programmable Double Pole or Ed Of Lie zoes Expadable to 24 zoes via kepads ad zoe expaders 1 x 4-wire data etwork (stadard 7/0.2 alarm cable) Up to 4 kepads ad 2 zoe expaders Up to 1 output module 2 idepedet areas each with 3 part arms 2 area arm suites 25 programmable User codes 500 Evet Log (time & date stamped) 1 programmable pael outputs (1 x 100mA ) 1.5 Amp power suppl (plastic Case) Premier Elite 48 8 full programmable Double Pole or Ed Of Lie zoes Expadable to 48 zoes via kepads ad zoe expaders 1 x 4-wire data etwork (stadard 7/0.2 alarm cable) Up to 4 kepads ad 4 zoe expaders Up to 2 output modules 4 idepedet areas each with 3 part arms 4 area arm suites 50 programmable User codes 500 Evet Log (time & date stamped) 2 programmable pael outputs (2 x 1A ) 2.5 Amp power suppl Premier Elite 12/24/48 & 64-W & Live frot 4 Oboard Zoes 8 wireless device Ricochet eabled receiver oboard (12-W) 16 wireless device Ricochet eabled receiver oboard (24-W) 32 wireless device Ricochet eabled receiver oboard (48/64-W) Expadable to 16/24/44/76 zoes via kepads ad zoe expaders 1 x 4-wire data etwork (stadard 7/0.2 alarm cable) 2-4 kepads ad 0/2/3 zoe expaders 1-2 output modules 2 or 4 idepedet areas each with 3 part arms 2 or 4 area arm suites 8/25/50 programmable User codes 250/500 Evet Log (time & date stamped) 1 or 2 programmable pael outputs (2 x 500mA ) 1.5 Amp power suppl Premier Elite 88 8 full programmable Double Pole or Ed Of Lie zoes Expadable to 88 zoes via kepads ad zoe expaders 1 x 4-wire data etwork (stadard 7/0.2 alarm cable) Up to 8 kepads ad 8 zoe expaders Up to 4 output modules 8 idepedet areas each with 3 part arms 8 area arm suites 100 programmable User codes 1000 Evet Log (time & date stamped) 5 programmable pael outputs (4 x 1A & 3A rela) 2.5 Amp power suppl 4 INS176-15

5 Premier Elite Series Istallatio Maual Premier Elite full programmable Double Pole or Ed Of Lie zoes Expadable to 168 zoes via kepads ad zoe expaders 2 x 4-wire data etwork (stadard 7/0.2 alarm cable) Up to 16 kepads ad 16 zoe expaders (8 per etwork) Up to 8 output modules (4 per etwork) 16 idepedet areas each with 3 part arms 16 area arm suites 200 programmable User codes 2000 Evet Log (time & date stamped) 5 programmable pael outputs (4 x 1A & 3A rela) 2.5 Amp power suppl Premier Elite full programmable Double Pole or Ed Of Lie zoes Expadable to 640 zoes via kepads ad zoe expaders 8 x 4-wire data etwork (stadard 7/0.2 alarm cable) Up to 64 kepads ad 64 zoe expaders (8 per etwork) Up to 64 output modules (8 per etwork) 64 idepedet areas each with 3 part arms 64 area arm suites 500 programmable User codes 5000 Evet Log (time & date stamped) 5 programmable pael outputs (4 x 1A & 3A rela) 2.5 Amp power suppl Premier Elite 12-W, 24, 24-W, 48, 48-W, 64-W 88, 168 & Evet Alarm Log Evet Madator Log 3-8 programmable digicom outputs (100mA each) 32 character zoe text Facilit for Plug-o Digimodem (Com300/2400/) Facilit for Plug-o IP Module (ComIP/Chiro/WebWaOe/Emizo) Facilit for a plug-o RedCARE/RM8 Rela Module (Not Premier 12-W, 24/ 24-W 48/64-W) PC-Com/priter port Remote Kepads LCD 32 character text displa 2 full programmable DP or EOL zoes 1 full programmable output (100mA -ve applied) Full adjustable back-lightig, ormall bright, dim or off, chagig to bright durig etr or followig a ke press Built i piezo souder Programmable Ifo. LED LCDL ALL the features of the LCD plus: Larger 32 character text displa Speaker output LCDP LCD with a built i Proximit Tag Reader LCDLP LCDL with a built i Proximit Tag Reader LCDLP-W Sstem Overview Ricochet Eabled LCDL with a built i Proximit Tag Reader FMK/SMK LCDLP Metal Flush or Surface Mout Various fiishes available RKP8/16Plus LED Armig kepad 2 full programmable EOL zoes CANNOT be used for Programmig Ico Guide Eglish UK Kepad F F Icoic Kepad O C P A e B C s A Eglish Kepad e B C s A R N P b R N P b R N Kes ICONS UK Eglish Eglish B = = B C = C = C s = = s A = A = A R = R = R N = N = N = = = = = = INS

6 Sstem Overview LED's = Power = Read = Armed/Ifo OK = Read ComWiFi Premier Elite Series Istallatio Maual Multi-protocol commuicator supportig Fast Format, Cotact ID ad SIA Level II protocols via TCP/IP High speed modem for remote uploadig ad dowloadig usig the Witex UDL software ad a PC LAN/WAN coectio to Texecom mobile apps For use with ADSL/DSL/Broadbad/WAN/LAN etc. Zoe Expaders 8XP = Omit = Service 8 full programmable DP or EOL zoes 8 full programmable outputs (100mA -ve applied each) Speaker output Programmable auxiliar iput Remotel wired 60iXD 2 loops x 30 full programmable id zoes id biscuit techolog Plug-o id is a registered trade mark of Chloride Safet Sstem Limited. Output Expaders OP16 16 full programmable outputs (100mA each) 1 fault output (100mA -ve applied) Ca be coected to mimic paels to give zoe idicatio Ca be coected to relas ad souders RM8 Rela Module Plug-o rela card (RedCARE footprit) 8 separate iputs for stadaloe operatio 8 x 3Amp rela outputs (/o, /c, com) Output ON LED idicatio Commuicators Com300 Multi-protocol commuicator supportig Fast Format, Cotact ID, SIA Level II ad EasCom Pager protocols 300-baud modem for remote uploadig ad dowloadig usig the Witex UDL software ad a PC For use with a aalogue telephoe lie (REN = 1) Com2400 Multi-protocol commuicator supportig Fast Format, Cotact ID, SIA Level II ad EasCom Pager ad SMS Messagig protocols 2400-baud modem for remote uploadig ad dowloadig usig the Witex UDL software ad a PC Seds SMS text messages to mobile phoes For use with a aalogue telephoe lie (REN = 1) ComGSM Provides a GSM telephoe path for Com300 & Com2400 Digital Commuicators Seds SMS text messages to mobile phoes Arm, Disarm, Reset the alarm, tur outputs o ad off, omit zoes ad sed messages to the cotrol pael usig SMS text messages 9600-baud modem for remote uploadig ad dowloadig usig the Witex UDL software ad a PC Premier Elite Speech Module Plug o module for Premier Elite Paels 4 audio messages up to 10 secods i legth O-board microphoe to record voice messages Compatible with Premier Elite factor built V3 ad above Messages triggered b programmable cotrol pael output ComPort + Provides additioal serial commuicatios port simple plug o module coects directl to oboard commuicator pis compatible with Premier Elite paels V3 ad above SmartCom Advaced Dual Etheret & WiFi itelliget commuicator Remotel upgradable Eables remote pael coectio without requirig router port forwardig Compatible with Premier Elite paels V4 ad above Other Devices PC-Com For coectig a PC to the cotrol pael via a RS232 Serial port allowig local uploadig ad dowloadig usig Witex UDL software USB-Com For coectig a PC to the cotrol pael via a USB 1.0 or 2.0 port allowig local uploadig ad dowloadig usig Witex UDL software Memor Module (ot 640) Fits oto the expasio port to provide a 10,000 evet log. Exteral Souders Texecom suppl a rage of exteral souders ComIP Multi-protocol commuicator supportig Fast Format, Cotact ID ad SIA Level II protocols via TCP/IP High speed modem for remote uploadig ad dowloadig usig the Witex UDL software ad a PC For use with ADSL/DSL/Broadbad/WAN/LAN etc. 6 INS176-15

7 Premier Elite Series Istallatio Maual Istallatio 3. Istallatio Istallatio Sequece Before attemptig to istall the alarm sstem, read this sectio. Oce ou have a overall uderstadig of the istallatio sequece, carefull work through each step. 1: Desig the Laout Make a rough sketch of the premises to get a idea of where the alarm detectio devices, kepads, zoe expaders etc. are to be located. 2: Moutig the Pael The cotrol pael should be mouted i a dr area close to a uswitched AC power source ad the icomig telephoe lie (if usig a commuicator). Mout the cotrol pael o a flat, plumb wall usig at least three screws of appropriate size. You must complete all wirig before coectig the batter or applig AC mais to the cotrol pael. WARNING: ELECTRICITY CAN KILL BEFORE coectig the cotrol pael ALWAYS discoect the suppl at the cosumer uit.if i ANY doubt cosult a qualified electricia. IMPORTANT SAFETY INFORMATION. HAZARDOUS VOLTAGES INSIDE, NO USER SERVICEABLE PARTS, NO USER ACCESS. ONLY coect the mais suppl to the mais termial block, NEVER coect the mais suppl directl to the PCB. ALWAYS refer to Natioal Wirig Regulatios whe coductig istallatio. A appropriate ad readil accessible discoectio device (e.g. a uswitched fused spur) MUST be provided as part of the istallatio. The discoectio device must NOT be fitted i a flexible cord. Where idetificatio of the eutral i the mais suppl is NOT possible a two-pole discoectio device MUST be used. Use mais cable of adequate carrig capacit for the rated curret (i.e. at least 0.75mm 2 ). 3: Istall the Kepads ad Zoe Expaders Mout ad coect the kepads, zoe expaders ad output modules to the cotrol pael (see page 20). 4: Istall the Alarm Detectio Devices Istall the detectio devices, PIR s, Cotacts, PA Buttos etc. ad coect them to the cotrol pael (see page 32). 5: Istall the Exteral Souder Istall the exteral souder ad coect to the cotrol pael. 6: Other Wirig Complete all other wirig icludig speakers, telephoe lie ad output coectios etc.. 7: Applig Power to the Cotrol Pael Oce steps 1 to 6 are completed, power ca be applied to the cotrol pael. Whe applig power for the first time, the factor default settigs must be loaded. Hold dow the Load Defaults the appl power. Power should alwas be coected i the followig order: Coect the red batter lead to the positive termial of the batter ad the coect the black batter lead to the egative termial The pael will ol become live whe the AC Mais is coected or the Batter Kick-start butto is pressed. Coect the AC mais 8: Kepad messages The kepad ma show a mix of faults followig first power up ad go ito alarm. If the sstem goes ito alarm, eter the default Egieer code, ad the alarm toe will stop To access the Egieer Programmig Meu, eter the default Egieer code 9: Select Laguage & Coutr Code Immediatel followig power up ou will be prompted to select the pael laguage ad coutr code. The coutr code determies the pael defaults loaded ad the operatio of the sstem. 10: Cofirm Devices The "Cofirm Devices" meu will appear check ad make sure all istalled Kepads ad Expaders are showig, press / ad / agai to cofirm. 11: Lear & Place Ricochet Devices Oce the pael is powered up ou will be prompted to lear a Ricochet devices to the sstem. Devices should be leart local to the receiver, ad placed i their selected locatios startig with the oe closest to the receiver. 12: Programmig the Cotrol Pael Please refer to sectio 5 for istructio o programmig the cotrol pael. 13: Testig the Sstem Test the sstem thoroughl to esure that all features ad fuctios operate as required (see page 128 for details). 14: EN50131 Grade 2 Requiremets A: Global Optios - Sstem Cofig Optio 12 Omit Tampers = NO (see page 71) 15: EN50131 Grade 3 & INCERT requiremets Cofiguratios that are required to esure that the pael is EN50131 GRADE 3 compliat. Failure to follow these istructios will reder the sstem o-compliat. A: Global Optios - Sstem Cofig The followig optios MUST be eabled Global optio 39 Armed Mask = Alarm is eabled (see page 72) Area optio 38 Ati maskig whe armed is assiged to the required Areas (see page 67) Global optio 34 - EN50131 Eabled (see page 72) Global optio 37 - Pael Grade 3 (see page 72) B: Hold-up alarms (PA) Whe alarms are cofigured as Hold-up alarms (PA), the istaller must clearl idetif these i the Zoe text as "Hold Up" alarms. If more tha oe is cofigured it is beeficial to iclude the locatio i the zoe text as well. C: User Codes User codes must be programmed as a 6 digit code to compl with INCERT For EN securit grade 3 paels, the user code must be a miimum of 5 digit code ( combiatios) (see page 124). D: Bell Tamper For EN50131 & INCERT istallatios the Bell & Aux Tamper must be wired to a zoe (see page 34) E: OP16 Output Module Whe used i a EN50131 compliat sstem the Premier Elite OP16 caot be used o its ow. It should ol be wired as part of a dais chai of bus devices with the fial device beig a Zoe expader or a Kepad. The tamper output of the Premier Elite OP16 should also be wired back to a zoe iput o the alarm pael F: Maskig Evets Will be otified & logged as a Fault whe the pael is UNSET. Will be otified & logged as a Itruder Alarm whe the pael is SET INS

8 Com2 Audio Com 1 Audio Istallatio Premier Elite Series Istallatio Maual Premier Elite 24 Cotrol Pael Laout Polmer Expasio! USE WITH TEXECOM PSU ONLY 0.75A 0.3A Batt Charge Load Defaults Com1 F9 Kick Start F6 F2 Batt DC Bell Network F3 Aux 12V F4 F1 2 Wire Smoke Bell +12V Eable Eable Egieer Remote Tx Rx Network F8 Strb 0V Tamp Bell+12V Op1 Spk - Aux + - Aux/Fault 12V Premier Elite 12-W, 24-W & 48/64-W Cotrol Pael Laout (48/64-W Show) 8 INS176-15

9 Eg Kepad Bell/Strb - 1Amp Aux 12v 1Amp Network 1 1Amp Network 2 1Amp Com 2 Com 1 JP10 Premier Elite Series Istallatio Maual Istallatio Cotrol Pael Laout Metal All Models (168 show) Box Tamp! USE WITH TEXECOM PSU ONLY F7 F2 F6 Kick Start F9 F8 F3 F5 F1 Tx1 Rx1 Tx2 Rx2 Load Defaults Expasio JP7 Heartbeat 100mV = 1Amp V F4 INS

10 Istallatio Premier Elite Series Istallatio Maual Premier Elite 24 PCB Laout 1: Texecom PSU Coectio Coected to the Texecom Switch Mode Power Suppl. DO NOT CONNECT THE MAINS SUPPLY TO ANY TERMINALS ON THE PCB. 2: Batter Kick-start Butto Whe powerig up the pael without AC Mais preset, this butto must be pressed i order to coect the batter. If AC Mais is preset this butto does ot eed to be pressed. 3: Earth Coectio Coects the PCB to earth 4: Batter Coectios A 12V rechargeable batter must be coected to these termials i order to provide cotiuous sstem operatio i the evet of a AC Mais failure (see page 19 for details). 5: Digicom Power These termials provide power; ad are ormall used for coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). 6: Exteral Souder Coectios These termials are used for coectig to a exteral souder uit (see page 34 for details). 7: Network Data Coectios & LED s Networks provide coectio for the kepads ad zoe expaders The + ad termials provide power whilst the T trasmits data ad R receives data (see page 20 for details). The red LED idicates that data is flowig out of the cotrol pael ad ormall flashes ver quickl. The gree LED idicates that data is flowig ito the cotrol pael ad ormall flashes slowl, the gree LED flashes faster as more devices are coected (see page 21 for details). 8: Pael Output 1 OP1 is a low curret (500mA -ve applied) output (see page 35 for wirig details). The output is also full programmable (see page 84 for programmig details). 9: SPK- Loudspeaker Coectio These termials ca be used for coectig up to oe 16 or two 8loudspeakers (see page 34 for wirig details). 10: Auxiliar 12V Power These termials are for coectig devices that require 12V power (protected b a 1A fuse). 11: Auxiliar/ Fault Coectios These termials ca be used for moitorig the tamper loop of a auxiliar device (see page 34 for details). 12: Programmable Zoes 1-8 These termials provide the coectios for the zoes (see page 32 for wirig details). Each zoe is full programmable (see page 54 for details). 13: Expader Port The expasio port is used for pluggig o a local zoe expader (see page 24 for details). 14: Com Port 2 Com Port 2 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). 15: Plug-o Commuicator Coectios This socket provides coectio for the plug-o commuicator (see page 37 for details). 16: Digicom Outputs Outputs 1 to 8 are low curret (100mA -ve applied) ad would ormall be used whe coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). Each output is full programmable (see page 84 for details). A remote reset iput ad a lie fault iput are also provided. 17: Flash Upgrade Port For use with the Flasher iterface to update pael firmware. 18: Box Tamper Coectio The micro switch provides tamper protectio for the mai cotrol pael i case of uauthorised access. 10 INS176-15

11 Premier Elite Series Istallatio Maual Istallatio 19: Com Port 1 Com Port 1 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). 20: Tamper Disable Lik This ca be used to disable the box tamper whe workig with the box lid removed. 21: Load Defaults Butto Press ad hold this butto whilst applig power to the cotrol pael to load the factor default settigs. Press ad hold this butto for 7 secods with power alread o the pael to restore just the Egieer code to the factor settig of See page 53 for full details. Loadig the factor defaults ca take up to 30 secods to complete. Loadig defaults will ol be possible if the NVM has ot bee locked (see page 71 for details). For a complete list of factor defaults, see the Quick Referece Guide sectio of this maual. 22: Expasio The Expasio Port ca be used for coectig a 60XiD Zoe Expader (see page 33 for details) or a AV Module (see page 42 for details), X-10 Module (Obsolete), Speech Module or a Memor Module. 23: Heartbeat LED/Power Light Flashes steadil to idicate that the cotrol pael is fuctioig correctl. If the light is ON or OFF all the time, the there could be a problem (see page 48 for details). 24: Batter Charge Curret Selector Whe usig a 7Ah stadb batter the charge curret selector should be set to 300mA. If a 17Ah batter is coected (metal cabiet ol) the selector should be set to the 750mA positio. 25: Egieers Kepad A portable Egieers kepad ca be plugged o here to allow easier access for programmig ad testig. Whe usig a kepad as a Egieers kepad, the address must be set to 10 (see page 23 for details). The kepad zoes ad lid tamper are ot moitored. F1 F6: Protectio Fuses (electroic PTC) The followig fuses are provided: F1 (900mA) Auxiliar 12V Power fuse (electroic PTC) F2 (900mA) Digicom Power (electroic PTC) F3 (900mA) Network 1 fuse (electroic PTC) F4 (900mA) Bell/Strobe fuse (electroic PTC) F6 (1.6 Amp) Batter fuse (electroic PTC) INS

12 Istallatio Premier Elite Series Istallatio Maual Premier Elite 12-W, 24-W & 48/64-W PCB Laout (48/64-W Show) BAR CODE V 100m V = 1 Amp F2 Tamper Disable 22 1 F8 F1 0.75A 0.3A Batt Charge F Egieer REM F4 F5 F6 F7 OPTIONS! USE WITH TEXECOM PSU ONLY : Batter Coectios A 12V rechargeable batter must be coected to these termials i order to provide cotiuous sstem operatio i the evet of a AC Mais failure. (protected b 1.6 Amp PTC Fuse) 2: Digicom Power & Iputs These termials provide u-fused power; remote reset ad lie fault iputs ad are ormall used for coectig a stad-aloe commuicator to the cotrol pael. 3: Digicom Outputs Outputs 1 to 8 are low curret (100mA -ve applied) ad would ormall be used whe coectig a stad-aloe commuicator to the cotrol pael. Each output is full programmable. (1-3 ol o 12- W) 4: Egieers Kepad A portable Egieers kepad ca be plugged o here to allow easier access for programmig ad testig. Whe usig a kepad as a Egieers kepad, the address must be set to 10. The kepad zoes ad lid tamper are ot moitored. 5: Network Data Coectios Network 1 provides coectio for the kepads ad zoe expaders. The + ad termials provide power whilst the T trasmits data ad R receives data. 6: Network Data Idicators The red LED idicates that data is flowig out of the cotrol pael ad ormall flashes ver quickl. The gree LED idicates that data is flowig ito the cotrol pael ad ormall flashes slowl, the gree LED flashes faster as more devices are coected. 7: Commuicatio Ports Com Port 1 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael. Com Port 2 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael. 8: Auxiliar 12V Power These termials are for coectig devices that require 12V power (protected b a 0.9A PTC fuse). 9: Expasio The Expasio Port ca be used for coectig a 60XiD Zoe Expader (see page 33 for details) or a AV Module (see page 42 for details), X-10 Module (Obsolete), Speech Module or a Memor Module. 10: Exteral Souder Coectios These termials are used for coectig to a exteral souder uit. 11: Load Defaults Butto Press ad hold this butto whilst applig power to the cotrol pael to load the factor default settigs. Close the tamper o the cotrol pael ad the press ad hold this butto for 7 secods with power alread o the pael to restore just the Egieer code to the factor settig of See page 53 for full details. Loadig the factor defaults ca take up to 30 secods to complete. Loadig defaults will ol be possible if the NVM has ot bee locked. For a complete list of factor defaults, see the Quick Referece Guide supplied o the eclosed CD. 12: Auxiliar/Fault Coectios These termials ca be used for moitorig the tamper loop of a auxiliar device (see page 34 for details). 13: Loudspeaker Coectios These termials ca be used for coectig up to oe 8 or two 16loudspeakers. 14: Pael Outputs Outputs 1 & 2 are 500mA -ve. These outputs are all full programmable. (12-W & 24-W ol output 1) 15: Zoe Coectios 4 Full programmable zoe iputs 16: Ricochet Network LED s Gree LED = Data received b the expader from the pael Red LED = Data trasmitted b the expader to the pael. (The flash rate depeds o the mode ad RF activit) 17: Eable 2 wire smoke Pael Output 1 ca be used for coectig up to 10, 12V 2-Wire smoke detectors.(ot 12-W) 18: Optios Switch Use to select the receiver fuctioalit. Switch 1 OFF =ot used o 48-W. Switch 2 OFF = 24-W & 48-W Ricochet Mode ON = Not Used 12 INS176-15

13 Premier Elite Series Istallatio Maual Istallatio Switch 3 ON = Impaq Cotact-W Wired Iput 2 will report as Tamper (default) OFF = iput 2 will report as a Alarm. Switch 4 OFF Walk test 19: Ricochet Eg kepad coectio (ot 12-W) A egieer s kepad (LCD kepad ad iterface lead) ca be temporaril plugged oto this coector to allow sstem programmig ad testig. Set the kepad address switches to all ON. 20: Ricochet Firmware Flash Port Coectios for flasher iterface to update Ricochet receiver firmware.(factor use ol) 21: Commissio Mode Jumper Fit whe learig ad placig devices, remove oce complete. 22: Atea RF atea 23: RF LED s Left = RED Trasmit, Middle = GREEN Receive, Right = RED Wireless Network Tick. 24: Plug-o Commuicator Coectios This socket provides coectio for COM300/COM2400 plug-o commuicators via the lead provided. 25: Ricochet Comm. Port Coectio Serial commuicatios port for coectig to a PC via PC Com/USB Com or Com IP for use with Ricochet Moitor Software. 26: Cover Tamper Provides tamper protectio for the cotrol pael. 27: Heartbeat LED/Power Light Flashes steadil to idicate that the cotrol pael is fuctioig correctl. If the light is ON or OFF all the time, the there could be a problem. 28: Cover Tamper Disable Disables the lid tamper 29: Flash Programmig Port For upgradig the pael firmware. 30: Batter Charge Selectio Select.03A or 0.75A batter chargig curret 31: Curret Readig Pads To calculate the curret draw of the cotrol pael, measure the voltage across the two pads ad multipl b 10 i.e. Readig = 34mV (x10) = 340mV = 340mA. 32: Batter Kick-start Butto Whe powerig up the pael without AC Mais preset, this butto must be pressed i order to coect the batter. If AC Mais is preset this butto does ot eed to be pressed. 33: Power Suppl Coectio Ol for use with the Texecom PSU. DO NOT CONNECT ANY OTHER MAINS SUPPLY TO THESE TERMINALS PTC Protectio Fuses The followig fuses are provided: F6 PTC (0.9A) Auxiliar 12V Power fuse F4 PTC (0.9 A) Network 1 fuse F5 PTC (0.9 A) Bell/Strobe fuse INS

14 Eg Kepad Bell/Strb - 1Amp Aux 12v 1Amp Network 1 1Amp Network 2 1Amp Com 2 Com 1 JP10 Istallatio Premier Elite Series Istallatio Maual Premier Elite 48/88/168 PCB Laout Box Tamp! USE WITH TEXECOM PSU ONLY F7 F2 F6 Kick Start F9 F8 F3 F5 F1 Tx1 Rx1 Tx2 Rx2 Load Defaults Expasio JP7 Heartbeat 100mV = 1Amp V F4 1: Texecom PSU Coectio Coected to the Texecom Switch Mode Power Suppl. DO NOT CONNECT THE MAINS SUPPLY TO THE AC INPUT TERMINALS ON THE PCB. 2: Batter Coectios A 12V rechargeable batter must be coected to these termials i order to provide cotiuous sstem operatio i the evet of a AC Mais failure (see page 19 for details). 3: Digicom Power & Iputs These termials provide ufused power; remote reset ad lie fault iputs ad are ormall used for coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). 4: Digicom Outputs Outputs 1 to 8 are low curret (100mA -ve applied) ad would ormall be used whe coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). Each output is full programmable (see page 84 for details). 5: Egieers Kepad A portable Egieers kepad ca be plugged o here to allow easier access for programmig ad testig. Whe usig a kepad as a Egieers kepad, the address must be set to 10 (see page 23 for details). The kepad zoes ad lid tamper are ot moitored. 6: Network Data Coectios Networks provide coectio for the kepads ad zoe expaders. The + ad termials provide power whilst the T trasmits data ad R receives data (see page 20 for details). 7: Auxiliar 12V Power These termials are for coectig devices that require 12V power (protected b a 1A fuse). 8: Programmable Zoes 1-8 These termials provide the coectios for the zoes (see page 32 for wirig details). Each zoe is full programmable (see page 54 for details). 9: Exteral Souder Coectios These termials are used for coectig to a exteral souder uit (see page 34 for details). 10: Auxiliar/Fault Coectios These termials ca be used for moitorig the tamper loop of a auxiliar device (see page 34 for details). 11: Loudspeaker Coectios These termials ca be used for coectig up to oe 16 or two 8loudspeakers (see page 34 for details). 12: Pael Outputs Outputs 1 & 2 are 500mA -ve applied, outputs 3 & 4 are 500mA +ve applied ad output 5 is a clea cotact rela (see page 35 for wirig details). These outputs are all full programmable (see page 83 for details). Pael outputs 3, 4 ad 5 are ol available o the 88 ad : Plug-o Commuicator Coectios This socket provides coectio for the plug-o commuicator (see page 37 for details). 14: Box Tamper Coectio The box tamper micro switch is coected here. The micro switch provides tamper protectio for the mai cotrol pael i case of uauthorised access. To disable the box tamper, remove the micro switch lead ad fit a jumper lik across the two pis. 15: Plug-o RedCARE/Dualcom Coectios These pis provide coectios for a plug-o RedCARE, Dualcom, Digicom or RM8 Rela module. Each output is full programmable (see page 84 for details). Whe a device is plugged o to these pis, ot all outputs ma be available, please refer to the relevat documetatio for details. 16: Flash Upgrade Port For use with the Flasher iterface to update pael firmware. 17: Batter Kick-start Butto Whe powerig up the pael without AC Mais preset, this butto must be pressed i order to coect the batter. If AC Mais is preset this butto does ot eed to be pressed. 14 INS176-15

15 Premier Elite Series Istallatio Maual Istallatio 18: Commuicatio Ports Com Port 1 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). Com Port 2 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). 19: Network Data Idicators The red LED idicates that data is flowig out of the cotrol pael ad ormall flashes ver quickl. The gree LED idicates that data is flowig ito the cotrol pael ad ormall flashes slowl, the gree LED flashes faster as more devices are coected (see page 21 for details). For a complete list of factor defaults, see the Quick Referece Guide supplied with our pael. 20: Load Defaults Butto Press ad hold this butto whilst applig power to the cotrol pael to load the factor default settigs. Press ad hold this butto for 7 secods with power alread o the pael to restore just the Egieer code to the factor settig of See page 53 for full details. Loadig the factor defaults ca take up to 30 secods to complete. Loadig defaults will ol be possible if the NVM has ot bee locked (see page 71 for details). 21: Expasio The Expasio Port ca be used for coectig a 60XiD Zoe Expader (see page 33 for details) or a AV Module (see page 42 for details), X-10 Module (Obsolete), Speech Module or a Memor Module. 22: Heartbeat LED/Power Light Flashes steadil to idicate that the cotrol pael is fuctioig correctl. If the light is ON or OFF all the time, the there could be a problem (see page 48 for details). 23: Curret Readig Pads To calculate the curret draw of the cotrol pael, measure the voltage across the two pads ad multipl b 10 i.e. Readig = 34mV (x10) = 340mV = 340mA. 24: NVM 1 & 2 All sstem programmig data ad the evet log is stored i oe or two o-volatile memor devices. F1 - F5: Protectio Fuses (48, 88 ad 168) The followig fuses are provided: F1 (1Amp) Auxiliar 12V Power fuse F2 (1.6 Amp) Batter fuse (electroic PTC) F3 (1 Amp) Network 1 fuse F4 (1 Amp) Bell/Strobe fuse F5 (1 Amp) Network 2 fuse (168 ol) INS

16 JP10 Istallatio Premier Elite Series Istallatio Maual Premier Elite 640 PCB Laout Com 3 Box Tamp 13.7V DC 2.5A max! USE WITH TEXECOM PSU ONLY 100mV = 1Amp V Jp1 Jp2 F3 F1 F15 F2 Kick Start F9 Com 1 Com 2 Heartbeat Jp9 F4 Expasio Load Defaults F5 F6 Bell 12V Eable Fault Tx Rx Fault Tx Rx Fault Tx Rx Fault Tx Rx Fault Tx Rx Fault Tx Rx Fault Tx Rx Fault Tx Rx Egieers Kepad F7 F8 F9 F10 F11 F12 F13 F14 Bell/Spk Aux 12V Fault Fault 1: Texecom PSU Coectio Coected to the Texecom Switch Mode Power Suppl. DO NOT CONNECT THE MAINS SUPPLY TO THE AC INPUT TERMINALS ON THE PCB. 2: Batter Coectios A 12V rechargeable batter must be coected to these termials i order to provide cotiuous sstem operatio i the evet of a AC Mais failure (see page 19 for details). 3: Digicom Power & Iputs These termials provide ufused power; remote reset ad lie fault iputs ad are ormall used for coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). 4: Digicom Outputs Outputs 1 to 8 are low curret (100mA -ve applied) ad would ormall be used whe coectig a stad-aloe commuicator to the cotrol pael (see page 35 for details). Each output is full programmable (see page 84 for details). 5: Egieers Kepad A portable Egieers kepad ca be plugged o here to allow easier access for programmig ad testig. Whe usig a kepad as a Egieers kepad, the address must be set to 10 (see page 23 for details). The kepad zoes ad lid tamper are ot moitored. 6: Network Data Coectios Networks 1-8 provide coectio for the kepads ad zoe expaders. The + ad termials provide power whilst the T trasmits data ad R receives data (see page 20 for details). 7: Exteral Souder Coectios These termials are used for coectig to a exteral souder uit (see page 34 for details). 8: Auxiliar/Fault Coectios These termials ca be used for moitorig the tamper loop of a auxiliar device (see page 34 for details). 9: Loudspeaker Coectios These termials ca be used for coectig up to oe 16Ω or two 8Ω loudspeakers (see page 34 for details). 10: Auxiliar 12V Power These termials are for coectig devices that require 12V power (protected b a 1A fuse). 11: Pael Outputs Outputs 1 & 2 are 500mA -ve applied, outputs 3 & 4 are 500mA +ve applied ad output 5 is a clea cotact rela (see page 35 for wirig details). These outputs are all full programmable (see page 83 for details). 12: Plug-o Commuicator Coectios This socket provides coectio for the plug-o commuicator (see page 37 for details). 13: Box Tamper Coectio The box tamper micro switch is coected here. The micro switch provides tamper protectio for the mai cotrol pael i case of uauthorised access. To disable the box tamper, remove the micro switch lead ad fit a jumper lik across the two pis. 14: Com Port 3 Com Port 3 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). 15: Plug-o RedCARE/Dualcom Coectios These pis provide coectios for a plug-o RedCARE, Dualcom, Digicom or RM8 Rela module. Each output is full programmable (see page 84 for details). Whe a device is plugged o to these pis, ot all outputs ma be available, please refer to the relevat documetatio for details. 16: NVM 1 & 2 All sstem programmig data ad the evet log is stored i oe or two o-volatile memor devices. 17: Flash Upgrade Port For use with the Flasher iterface to update pael firmware. 16 INS176-15

17 Premier Elite Series Istallatio Maual 18: Commuicatio Ports 1&2 Com Port 1 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). Com Port 2 is a serial commuicatios port ad ca be used for coectig a PC ruig Witex or a supported serial device to the cotrol pael (see page 101 for details). 19: Expasio The Expasio Port ca be used for coectig a 60XiD Zoe Expader (see page 33 for details) or a AV Module (see page 42 for details), X-10 Module (Obsolete), Speech Module or a Memor Module. 20: Load Defaults Butto Press ad hold this butto whilst applig power to the cotrol pael to load the factor default settigs. Press ad hold this butto for 7 secods with power alread o the pael to restore just the Egieer code to the factor settig of See page 53 for full details. Loadig the factor defaults ca take up to 60 secods to complete. Loadig defaults will ol be possible if the NVM has ot bee locked (see page 71 for details). 21: Heartbeat LED/Power Light Flashes steadil to idicate that the cotrol pael is fuctioig correctl. If the light is ON or OFF all the time, the there could be a problem (see page 48 for details). Istallatio 22: Batter Kick-start Butto Whe powerig up the pael without AC Mais preset, this butto must be pressed i order to coect the batter. If AC Mais is preset this butto does ot eed to be pressed. 23: Curret Readig Pads To calculate the curret draw of the cotrol pael, measure the voltage across the two pads ad multipl b 10 i.e. Readig = 34mV (x10) = 340mV = 340mA. F1 F14: Protectio Fuses The followig electroic fuses are provided: F3 (1600 ma) Batter F4 (250mA) Speaker F5 (900mA) Network 1 F6 (900mA) Bell/Strobe F7 (900mA) Network 2 F8 (900mA) Network 3 F9 (900mA) Network 4 F10 (900mA) Network 5 F11 (900mA) Network 6 F12 (900mA) Network 7 F13 (900mA) Network 8 F14 (900mA) Auxiliar 12V INS

18 Istallatio Premier Elite Series Istallatio Maual Power Suppl Ratigs If istallig to EN50131 or PD6662, the sstem stadb times i the evet of a mais power failure var depedig o the grade ad how AC fail is sigalled: Whe calculatig the curret cosumptio of the sstem ou must iclude the curret take b the cotrol pael ad all the devices that it powers. If the total curret exceeds the Rated Output for the grade ou are istallig to the a additioal power suppl is required Premier Elite 24 (Metal) Curret Curret Cosumptio 95mA Maximum Curret Available 0.75A charge 1.0A 0.3A charge 1.9A Rated Output Batter Arragemet Batter Rated Output (Amps) Charge 12h 24h 30h 60h 1 x 7Ah 0.3A 0.48A 0.19A 0.13A 0.021A 1 x 17Ah Stadb ad Recharge Times 0.3A 1.32A 0.61A 0.47A 0.18A 0.75A 1.0A 0.61A 0.47A 0.18A EN Grade 1 Grade 2 Grade 3 Miimum Stadb 12h 12h 30h * Period Maximum Recharge 72 Hrs 72 Hrs 24 Hrs Time PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Jumper Settigs Batter Arragemet Recharge Time Batter Charge Selector 1 x 7Ah < 24Hrs 0.3 A < 24Hrs 0.75 A 1 x 17Ah < 72Hrs 0.3 A Premier Elite 24 (Polmer) Curret Curret Cosumptio 95mA Maximum Curret Available 0.3A charge 1.1A Rated Output Batter Rated Output (Amps) 12h Batter Arragemet Charge 1 x 7Ah 0.3A 0.48A Stadb ad Recharge Times EN Grade 1 Grade 2 Miimum Stadb Period 12h 12h Maximum Recharge Time 72 Hrs 72 Hrs PD6662 Grade 1 Grade 2 Stadb Period 12 Hrs 12 Hrs Maximum Recharge Time 72 Hrs 72 Hrs Premier Elite 48/88/168 Curret Curret Cosumptio 125mA Maximum Curret Available 0.75A charge 1.0A 0.3A charge 1.9A Rated Output Batter Rated Output (Amps) 12h 24h 30h 60h Batter Arragemet Charge 1 x 7Ah 0.3A 0.458A 0.166A 0.108A 1 x 17Ah 0.3A 1.29A 0.583A 0.441A 0.158A 0.75A 1.0A 0.583A 0.441A A Stadb ad Recharge Times EN Grade 1 Grade 2 Grade 3 Miimum Stadb 12h 12h 30h * Period Maximum Recharge 72 Hrs 72 Hrs 24 Hrs Time PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Jumper Settigs Batter Arragemet Recharge Time Batter Charge Selector 1 x 7Ah < 24Hrs 0.3 A < 24Hrs 0.75 A 1 x 17Ah < 72Hrs 0.3 A Premier Elite 640 Curret Curret Cosumptio 125mA Maximum Curret Available 0.75A charge 1.0A Rated Output Batter Batter Rated Output (Amps) Arragemet Charge 12h 24h 30h 60h 1 x 17Ah 0.75A 1.0A 0.558A 0.416A 0.133A Stadb ad Recharge Times EN Grade 1 Grade 2 Grade 3 Miimum Stadb 12h 12h 30h * Period Maximum Recharge 72 Hrs 72 Hrs 24 Hrs Time PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Premier Elite 12-W, 24-W & 48/64-W Curret Curret Cosumptio 150mA Maximum Curret Available 0.3A charge 1.0A Rated Output Batter Rated Output (Amps) 12h Batter Arragemet Charge 1 x 7Ah 0.3A 0.433A Stadb ad Recharge Times EN Grade 1 Grade 2 Miimum Stadb Period 12h 12h Maximum Recharge Time 72 Hrs 72 Hrs PD6662 Grade 1 Grade 2 Stadb Period 12 Hrs 12 Hrs Maximum Recharge Time 72 Hrs 72 Hrs 18 INS176-15

19 Premier Elite Series Istallatio Maual Coectig AC Mais The AC Mais suppl is coected to a 3 wa Euro Tpe fused termial block, which is fitted with a 3.15A medium/slow blow fuse. All other wirig MUST be carried out before AC mais is coected to the cotrol pael. After coectig the AC Mais, fit the mais cover, this ca be foud i the spares bag. Istallatio EN50131 Batter Istallatio (Polmer Paels) Step 1: Screw 2 x batter clamps ito holes provided i the rear of the pael. Coectig Batteries If istallig to PD6662: 2010 the ol Oe 12V 7Ah batter or 12V 17Ah batter ca be fitted iside the cotrol pael to provide cotiued operatio i the evet of a AC mais failure, otherwise, two 12V 7Ah batteries ca be coected. All other wirig MUST be carried out before the batter is coected to the cotrol pael. Coect the red batter lead to the positive termial of the batter ad the coect the black batter lead to the egative termial. The pael will ol become live whe the AC Mais is coected or the Batter Kick-start butto is pressed. Step 2: Fit batter ito place, positio the clamps agaist the top face of the batter ad tighte screws. INS

20 Istallatio Coectig Devices to the Network Before coectig kepads, zoe expaders ad output modules, isolate ALL power from the cotrol pael (AC Mais & Batter). Do ot cotiue if there is still power preset o the cotrol pael. Coectig devices with power still preset o the cotrol pael ma damage the device or cotrol pael ad ivalidate a warrat. Kepads, zoe expaders ad output modules are all coected to the same etwork termials located at the bottom left had corer of the cotrol pael ad ma be coected seriall (dais chai), i parallel (star) or a combiatio of the two (see Figure 1, page 22 for details). No more tha 8 zoe expaders, 8 kepads ad 4 output modules ca be coected to each etwork. The maximum umber of devices that ca be coected i total will deped o the cotrol pael fitted. Wheever ew devices are coected to the etworks, the must be cofirmed oto the sstem usig the Cofirm Devices meu optio (see page 133 for details). Wirig the Network The etworks are made up of four termials icorporatig power ad data. To esure correct operatio, all four termials o the device must be coected to the correspodig termials o the cotrol pael, or previous device (see Figure 1, page 22 for details). The table below shows each termial ad its descriptio: Termial Descriptio + +12V Suppl - 0V Suppl T R Trasmit Data Receive Data Devices ca be coected usig 4-core cable. However, it is recommeded that 6 or 8-core cable is used as the spare cores ca be used to Double Up o the power coectios if eeded. Straded tied aealed copper BS4737 7/0.2 alarm cable ca be used for most istallatios. However, uder certai coditios it ma be ecessar to use screeed cable of the same specificatio. PLEASE NOTE. The coductor resistace should be o greater tha 8Ω per 100metres. The usage of Low grade TCCA (tied copper clad cable) ca have a detrimetal effect o the operatio of the sstem ad the cable distaces specified i this maual. Cable Distaces Premier Elite Series Istallatio Maual The maximum recommeded distace for devices whe usig stadard 7/0.2 alarm cable is: 250m for each brach whe usig the star (parallel) cofiguratio Whe usig a dais chai (series) cofiguratio the maximum distace will deped o the umber of devices coected o the chai. The more devices that are coected, the shorter the distace to the last device (this is due to voltage drop i the cable) Whichever method of wirig cofiguratio is used, esure that the voltage betwee the + ad termials at each device is o lower tha 10.0V whe the sstem is ruig o the stadb batter. The table below shows maximum cable rus whe oe kepad or expader is istalled usig stadard 7/0.2 alarm cable with various loads: Cofiguratio Max. Cable Ru 1. Kepad + 2 PIR 250m 2. Expader + 2 PIR 250m 3. Expader + 8 PIR 100m 4. As No Speaker 30m Distaces of up to 1km ca be achieved betwee the cotrol pael ad a device. However, a power suppl must be istalled close to the device to power it locall, this will help to overcome voltage drop caused b the log cable ru. Overcomig Voltage Drop There are several was to overcome voltage drop: Use thicker lower resistace cable. Stadard 7/0.2 alarm cable has a resistace of 8 per 100m Double up o the power coectios this will require usig a 6 or 8-core cable rather tha a 4-core cable Istall a power suppl to power the device locall, remember to commo the two egative coectios Istallig a Power Suppl Whe a power suppl is istalled, the 0V coectios o the power suppl must be coected through to 0V o the cotrol pael ad the +12V coectio betwee the cotrol pael ad the device must be discoected (see Figure 2, page 22 for details). Use of pull up resistors I certai circumstaces it ma be ecessar to use pull up resistors. Costat etwork errors, devices droppig of off etworks, or the use of poor qualit cable ca all be helped b utilisig resistors to "pull" the etwork up. makig sure that errors i data flow are miimised. The diagram below details the tpe ad placemet of the resistors. + - T R NETWORK OUT 1K 1K Coect 1K resistor betwee R ad + at the Cotrol Pael Kepad or Expader NETWORK OUT + - T R Kepad or Expader NETWORK OUT + - T R Coect 1K resistor betwee T ad + at the furthest etwork device Kepad or Expader NETWORK OUT + - T R Cotrol Pael Network 1 or 2 20 INS176-15

21 Premier Elite Series Istallatio Maual Istallatio LED Network Diagostics Each etwork has two LED s to idicate data flow. The red LED idicates data flowig out of the T termial ad the gree LED idicates data flowig ito the R termial. The table below shows each LED status ad its meaig: Elite Pael O Flashig Off TX (Red) Normal Operatio Pael Fault Cable short to 12v RX (Gree) Cable Short to 0v Normal operatio whe device is coected No devices coected or short to 12v 8XP O Flashig Off mote NETWORK IN NETWORK OUT + - T R + - T R A Power B C Tamp Disab LED A N/A Data pulses from Pael No coectio LED B N/A Data pulses from devices o Network Out Network Out ot Coected LED C Expader Olie Flashes address umber whe i Egieerig / all expaders flash as oe util first coected No power 8/32XP-w O Flashig Off RX Normal Operatio Fault No coectio o 'T' wire TX Fault Normal Operatio No coectio o 'T' wire / Icorrectl addressed RKP O Off RX Normal Operatio No coectio o 'T' wire iprox O Off RX Normal Operatio No coectio o 'T' wire The LED s are provided as a aid for fault fidig ad therefore should ot be completel relied upo to idicate that there is a fault. INS

22 Istallatio Premier Elite Series Istallatio Maual Figure 1: Network Coectios (250m without additioal power suppl). Figure 2: Network Coectios (1km with additioal power suppl). 22 INS176-15

23 Premier Elite Series Istallatio Maual Remote Kepads Kepad Laout Coectig Kepads Kepads are coected to the etwork termials located at the bottom left had corer of the cotrol pael (see pages 20 & 22 for details). Kepad Addressig Each kepad must be assiged a differet address usig the DIL switches located o the left had side of the PCB. The table below shows the kepad addressig: Address DIL 1 DIL 2 DIL 3 DIL 4 1 O or off Off Off Off 2 2 Off O Off Off 2 3 Off Off O Off 2 4 Off Off Off O 2 5 * O Off Off O 6 * Off O Off O 2 7 * Off Off O O 2 8 * O Off O O 2 Egieers O O O O 2 Never set two kepads o the same etwork to the same address. Whe usig a kepad as a Egieer s kepad, the DIL switches must all be O. * & 640 ol Kepad Zoes The kepad has two programmable zoes (see page 32 for details). Each zoe is also full programmable (see page 54 for details) Zoe Numberig Istallatio The table below shows the zoe allocatio whe the kepads are istalled: Address Zoes (Network 1) Zoes (Network 2) 1 Umapped Umapped 2 Umapped Umapped 3 Umapped Umapped 4 Umapped Umapped 5 * Umapped Umapped 6 * Umapped Umapped 7 * Umapped Umapped 8 * Umapped Umapped Address Zoes (Network 3,4 & 5) Zoes (Network 6 7 & 8) 1-8 ** Umapped Umapped The zoes iside the kepads are ot see b the sstem util the have bee mapped to a zoe umber (see page 80 for details). * ol ** 640 ol Kepad Output The remote kepad has oe programmable output, which ca be used to drive auxiliar devices such as LED s, souders or relas etc. Wire as per Pael Outputs show o page 35 (see page 83 for details). The electrical characteristics for the output are show below: Output Max Curret Tpe 1 100mA Switched -ve Kepad Speaker Output (LCDL/LCDLP Ol) The LCDL ad LCDLP kepads have a output that ca be used for drivig up to oe 16 or two 8 loudspeakers (see page 34 for details). The speaker volume is also full adjustable (see page 80 for details). Programmable Ifo. LED The Ifo. LED o the frot of the kepad ca be programmed to mimic the kepad output or show the armed status of a area (see page 80 for details). Adjustable Backlightig To adjust the kepad backlightig press the YES ke for 5 secods, the with the YES ke still pressed use to icrease or decrease the backlightig util the required brightess is achieved, the release both kes. The backlight ca ol be adjusted whe the kepad is ot i a meu. Kepad Lid Tamper The lid tamper of each kepad ca be disabled if required usig the relevat kepad optio i the Kepad Setup meu (see page 80 for details). INS

24 Expaders Devices Expaders Devices Istallatio 8XP-W & 32XP-W V3.xx> Premier Elite Series cotrol paels with V4.xx firmware ow cotais additioal Ricochet V3 capabilit. This ew techolog adds ew features ad fuctios for Ricochet eabled securit sstems. DO NOT mix V1 &V2/V3 expaders o the same Premier Elite pael V3 Expader Diagostics V3 expaders have the abilit to displa diagostic iformatio about devices. Please see page Error! Bookmark ot defied. of INS467-8 for full details. V3 Expader & V4 Premier Elite Cotrol Paels Temperature Readigs are available from supported devices Expaders ca be replaced without the eed to relear devices o This ol applies if devices were origiall leared to a V4 pael. Pael flashig cosequeces Pael Versio V2.X.X V3.X.X V4.X.X> Expader Versio Relear devices if ou replace the expader? Relear if ou Flash Elite 24/48/88/168 & 640 to V4.X.X Relear if ou Flash Elite 12- W/24-W & 48-W to V4.X.X All Versios Yes No No 1.X.X 2.X.X Yes No No No No No 8XP-W & 32XP-W V2.xx> Ricochet V2.xx This ew techolog adds additioal features ad fuctios for Ricochet eabled securit sstems. The Expaders used must be Premier Elite XP-W V2.xx. DO NOT mix V1 & V2 expaders o the same Premier Elite pael Multiple Expader Support It is ow possible to add multiple expaders to the sstem allowig for greater flexibilit i sstem desig, ad also takig wireless capabilit to ew levels. Additioal device modes ad diagostics fuctios also give more iformatio about the sstem status, ad allow greater cotrol over devices modes of operatio. Cotrol Pael Capacit The table below details the maximum umber of expaders, devices ad Premier Elite SmartKe that ma be used o the differet cotrol paels, other cofiguratios ma be possible b mixig Premier Elite 32XP-W & Premier Elite 8XP-W. Pael 32XP-W Premier Elite SmartKe 8XP-W Premier Elite SmartKe Premier Elite Premier Elite Premier Elite N/A 48/64-W N/A N/A N/A Premier Elite Premier Elite Premier Elite Premier Elite Series Istallatio Maual Premier Elite 32XP-W take 4 address slots o the etwork, Premier Elite 8XP-W take oe address To eable all of the advaced fuctioalit ad diagostics capabilit V2 the followig are miimum requiremets:- Witex Versio 6.2 or later Ricochet Moitor or later Premier Elite Series V2.xx or later Premier Elite 32XP-W & 8-W Expaders V2.xx or later Sstem Desig Cosideratios To esure correct setup ad operatio of the Wireless Network it is importat that the followig procedures are used whe learig ad placig devices. Multiple Expader Sstems Whe usig multiple expaders great care should be take whe desigig the sstem. Each expader should be treated as its ow wireless etwork; it is ot possible for devices to hop from oe wireless etwork to the other, it is also ot possible for expaders to pass wireless sigals from devices ot assiged to them ad or ca the expaders talk to each other. Learig Devices All devices should be leart before the are placed i their fial locatio. The expader should be i commissio mode, please see INS467 for details. This will esure that the are registered o the receiver or cotrol pael, ad that Mesh Networks ad routig are established correctl. Please refer to the relevat sectio i this documet to Lear Devices to the sstem. Learig Premier Elite SmartKe O V2 sstems Premier Elite SmartKe should ol be leared AFTER all devices ad expaders are i their fial locatio, this is critical o larger sstems where multiple expaders are beig used Devices should be at least 30cm s awa from the receiver whe beig leared. Placig Devices Oce all of the devices have bee leart, the will eed placig i their desired locatio, this should be doe b istallig devices closest to the expader first ad the workig outwards so that the last devices istalled are those furthest awa from the expader. Make sure to istall devices with the expader i Commissio mode. See INS467 for details Devices also have a commissio mode which will idicate a secure ad valid path of commuicatio to the receiver. See INS467 for details You should wait at least 15 miutes after istallig the last device to make sure routig has bee correctl established betwee all sstem devices. For maximum reliabilit ad sstem itegrit avoid log ad thi set-ups. Devices are capable of hoppig through up to two other devices, or a maximum of three hops. 24 INS176-15

25 Premier Elite Series Istallatio Maual PCB Laout 1: Egieers Kepad Coectio A egieer s kepad (Premier/Elite LCD kepad ad iterface lead) ca be temporaril plugged oto this coector to allow sstem programmig ad testig. (Fuctios depedet o Pael firmware versio) Set the kepad address switches to all o. 2: Network Coectio The + ad termials provide power whilst the T ad R termials are trasmit ad receive data. 3: For Future Use 4: Comm. Port Coectio Serial commuicatios port for coectig the 8 XP-W & 32XP-W to a PC via PC Com/USB Com or Com IP for use with Ricochet Moitor Software. 5: Lid Tamper Whe ope puts the sstem ito commissio mode ad digitall atteuates the receiver sigal b 15Db. 6: Programmig LED s Allows programmig of devices directl to the receiver, i cojuctio with the lear switch. Also able to idicate device diagostics from V3 owards. 7: Atea RF Atea. Premier 32XP-W = 2 x Atea ON 1 ON Premier 8XP-W = 1 x Atea 8: Network LED's Gree LED = Data received b the expader from the pael Red LED = Data trasmitted b the expader to the pael. (The flash rate depeds o the mode ad RF activit) Ricochet V2 & V3 Expader Addressig Istallatio 9: Heartbeat LED Flashes steadil to idicate that the receiver is fuctioig correctl. If the light is ON or OFF all the time, the there could be a hardware problem. 10: Lear Switch To be used with programmig LED s to lear devices directl to the receiver. 11: Optios Switch Use to select the receiver fuctioalit depedig o pael firmware. Switch 1 ON =firmware depedat, please see the relevat programmig sectio. Switch 2 ON = Legac Mode OFF = Ricochet Switch 3 ON = Impaq Cotact-W Wired Iput 2 will report as Tamper (default) OFF = iput 2 will report as a Alarm. Switch 4 Walk test 12: Address Switch Used to assig the address of the receiver o the premier etwork 13: RF LED Flashes whe trasmittig or receivig RF data 14: Tamper Disable Disables the lid ad rear tamper 15: Egieer s Kepad LED's Red LED flashes costatl, the flash rate icreases whe data is beig trasmitted. 16: Flash Programmig Port Variat depedet, for flashig the expader with updated firmware. Itroductio The address rage ad switch positio will deped o which combiatio of expaders are beig used. Each 32XP-W takes up 4 address slots o the cotrol pael etwork, however the etwork slots are virtual util devices are assiged to available zoes. It is possible that if a 32XP-W is beig used at Address 1, but ol 16 devices have bee used, Address 3 & 4 are available for hardwired 8XP's or 8XP-W's. Please see some examples of mixig differet tpes of Expaders o various Elite paels ad the addressig requiremets. Example 1 Totall wireless sstem(s) Pael Expaders (Max) Premier Elite 88 Expader Address Premier Elite 168 Expader Address Premier Elite 640 Expader Address 32XP-W Network 1 Network 2 Network 3 Network 4 Network 5 Network 6 Network 7 Network Exp 1 Exp 2 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1 5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Exp 1 Exp 2 Exp 1 Exp 2 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp 2 Exp 1 Exp INS

26 PSU Istallatio Premier Elite Series Istallatio Maual Example 2 Premier Elite 168, + 32XP-W, 8XP-W's & 8XP's mix Pael Network 1 Network 2 Expaders (Wireless) Expaders (Mixed) Premier Elite XP-W 2 x 8XP-W 8XP-W 8XP-W 8XP 8XP Expader Address 1 5 & Devices (Max) Premier Elite SmartKe (Max) N/A N/A Example 3 Premier Elite 88, 32XP-W + 8XP's Pael Network 1 Expaders (Mixed) Premier Elite 88 32XP-W 2 x 8XP Expader Address 1 5 & 6 Devices Used Premier Elite SmartKe (Max) XE Zoe Expader (24 Ol) The 8XE Zoe Expader has: 8 full programmable zoes Aux 12V Output Expader Laout Expader Zoes The expader has eight programmable zoes (see page 32 for wirig details). Each zoe is also full programmable (see page 54 for programmig details). 8XP Zoe Expader Expader Laout Tamper Switch Egieers Kepad Iterface Network Termials Power LED Remote NETWORK IN NETWORK OUT + - T R + - T R Tamper Disable Coectig Expaders The 8XE local zoe expader plugs directl o to the termials located o the right had side of the cotrol pael (see below for details). To istall the local zoe expader proceed as follows: 1. Esure that all power is removed from the cotrol pael (mais ad batter) before attemptig to fit the expader. 2. Push the four support pillars (supplied) ito the four locatig holes o the cotrol pael PCB. 3. Alig the local expader coector with the 8 wa plug (JP5) o the cotrol pael. Push expader ito place, esurig that all four pillars clip ito the four locatig holes o the local expader. Zoes 1 & 2 Aux 12V Zoes 3 & 4 Com Port YPE Aux Iput ON Speaker Output Power OUTPUTS Outputs 1 to 8 Address Switch Zoes 5 & 6 Aux 12V Zoes 7 & 8 Coectig Expaders Expaders are coected to the etwork termials located at the bottom of the cotrol pael (see pages 20 & 22 for details). Expader Addressig Each Expader must be assiged a differet address usig the DIL switches located i the cetre of the PCB. The table below shows the expader addressig: Zoe Numberig The table below shows the zoe allocatio whe the expaders are istalled: Cofiguratio Pael Zoes Expader Zoes 8XE = Zoes 1 to 8 9 to 16 8XE= Tampers 1 to 8 Tampers 1 to Address DIL 1 DIL 2 DIL 3 DIL 4 1* O or off Off Off Off 2* Off O Off Off 3** Off Off O Off 4** Off Off Off O 5*** O Off Off O 6*** Off O Off O 7*** Off Off O O 8*** O Off O O INS176-15

27 Premier Elite Series Istallatio Maual Never set two expaders o the same etwork to the same address. * 24/48/64/88/168/640 ** 48/64/88/168/640 ol *** & 640 ol Expader Zoes The expader has eight programmable zoes (see page 32 for wirig details). Each zoe is also full programmable (see page 54 for details). Star ad Dais Jumper Optio The PCB has a jumper JP3 which allows ou to select either STAR (S) or DAISY (D) wirig cofiguratio. The jumper should be set as follows: If the etwork IN coectio is wired i parallel with a other device the jumper MUST be set to the S positio. All previous versios of the expader operated i this mode ad for backward compatibilit the uit is supplied with the jumper i this positio. If the etwork IN coectio is ol wired to oe device the jumper should be set to the D positio. Dais chai wirig example Combied Wirig example Istallatio Whe the jumper is set to the STAR positio the etwork data sigals are ot boosted betwee expader ad the previous device. I this mode the etwork cablig MUST ot exceed 100m betwee devices. Whe the jumper is set to the DAISY positio the etwork data sigals are boosted betwee the expader ad the previous device. This mode will allow expaders o the etwork to be coected up to 250m apart ad MUST ol be selected if the expader has oe device coected to the etwork IN coectios. Star wirig example Zoe Numberig (24/48/88/168) The table below shows the zoe allocatio whe the expaders are istalled: Address Zoes (Network 1) Zoes (Network 2) 1* * ** ** *** *** *** *** Network 2 ca ol be used o the 168. For 640 see page 31 * 24/64/48/88/168/640 ** 48/64/88/168/640 ol *** & 640 ol Expader Auxiliar Iput The expader has oe programmable iput. This auxiliar iput ca be used to moitor auxiliar devices such as tamper loops etc. Wire as per Aux Tamper show o page 33 (see page 82 for details). The sstem will respod as follows: Iput Status 0V Applied 0V Removed Sstem Respose Iput Secure Iput Active EOL Various * For further details o how the iput status affects the sstem please refer to page 82. * For wirig details, see page 36. INS

28 D1 Spk + D 0 Ext It Ext It L1- L2- L+ Remote LED s Rela 1 Ext Coil C1 C Istallatio Expader Outputs The zoe expader has eight programmable outputs, which ca be used to drive auxiliar devices such as LED s, souders or relas etc. Wire as per Pael Outputs show o page 35 (see page 83 for details). The electrical characteristics for the outputs are show below: Outputs Max Curret Tpe 1 to 8 100mA Switched -ve Expader Speaker Output The expader has a output that ca be used for drivig up to oe 16 or two 8 loudspeakers (see page 34 for details). Expader Com Port The Com Port ca be used to coect a PSU200 or a moitored power suppl. Expader Lid Tamper The lid tamper of each expader ca be disabled if required b fittig a jumper lik across the cetre ad right had pis of the Eable Tamper pis (JP2) leavig the left had pi free. These pis are located to the left of the address DIL switch just beeath the fuse. Premier Elite Series Istallatio Maual Never set two modules o the same etwork to the same address. *88/168 & 640 ol Refer to the iprox Module maual for programmig ad operatig istructios. 60iXD Zoe Expader The 60iXD expader provides the followig facilities: Two id loops each supportig up to 30 biscuits Fused 12V output for powerig detectors Egieer s kepad port for local id diagostics OP16 Output Expader Output Module Laout iprox Module iprox Laout Tamper Iteral Souder Off O ON Address ON Optios RTE N/C N/O Com + T R Coectio The iprox Module is coected to the etwork termials located at the bottom of the cotrol pael (see pages 20 & 22 for details). Addressig The iprox Module is addressed as a kepad ad will occup a kepad slot o the etwork. The uit must have a uique address, which must ot coflict with kepad or a other iprox Module o the same etwork The followig table shows the addressig: Address DIL 1 DIL 2 DIL 3 DIL 4 1 O or off Off Off Off 2 2 Off O Off Off 2 3 Off Off O Off 2 4 Off Off Off O 2 5* O Off Off O 6* Off O Off O 2 7* Off Off O O 2 8* O Off O O Coectig Output Modules Output modules are coected to the etwork termials located at the bottom left had corer of the cotrol pael (see pages 20 & 22 for details). Output Module Addressig Each output module must be assiged a differet address usig the DIL switches located i the cetre of the PCB. The table below shows the expader addressig: Address DIL 1 DIL 2 DIL 3 DIL 4 1 O or off Off Off Off 2 2 Off O Off Off 2 3* Off Off O Off 2 4* Off Off Off O 2 5 ** O Off Off O 6 ** Off O Off O 2 7 ** Off Off O O 2 8 ** O Off O O 2 * 88 ad 168 ol ** 168 ol INS176-15

29 Premier Elite Series Istallatio Maual I order for a output module to mimic zoe expader outputs, the output module must be addressed the same as the zoe expader that it is mimickig. A combiatio of addresses ca be used o each output module i.e. Bak 1 ca be addressed to mimic expader 3 ad Bak 2 ca be addressed to mimic expader 8. Bak 1 switch sets the address of the device that Bak 1 outputs 1 to 8 will mimic. Bak 2 switch sets the address of the device that Bak 2 outputs 1 to 8 will mimic. PCB Laout Istallatio Output Module Numberig The table below shows the output allocatio whe the output modules are istalled, Address Outputs (Network 1) Outputs (Network 2) ** 1 Expader 1, 1-8 Expader 1, Expader 2, 1-8 Expader 2, * Expader 3, 1-8 Expader 3, * Expader 4, 1-8 Expader 4, ** Expader 5, 1-8 Expader 5, ** Expader 6, 1-8 Expader 6, ** Expader 7, 1-8 Expader 7, ** Expader 8, 1-8 Expader 8, 1-8 Network 2 ca ol be used o the 168 * 88 ad 168 ol ** 168 ol for 640 see page 31 Outputs The output module has 16 programmable outputs, which ca be used to drive auxiliar devices such as LED s, souders or relas etc. Wire as per Pael Outputs show o page 35 (see page 83 for details). The electrical characteristics for the outputs are show below: Istallatio Before attemptig to istall the RM8 Rela Module, isolate ALL power from the cotrol pael (AC Mais ad Batter). Do ot cotiue if there is power still preset o the cotrol pael. Pluggig o the Rela Module with power still preset o the cotrol pael ma damage the Rela Module, cotrol pael or both ad ivalidate a warrat. Pluggig o the Rela Module 1. Esure that the Rela Module is the correct wa up (as show above) 2. Getl press dow o the Rela Module util the rela Module is seated correctl. 3. Recoect power to the cotrol pael. Testig o the Rela Module 1. For plug o operatio, test the Rela Module i accordace with the cotrol pael istructios. 2. To test the auxiliar iputs, appl 0V to each iput i tur ad esure that the correct LED illumiates ad a click is heard from the rela. Coectig Outputs The RM8 Rela Module has 8 outputs. These outputs ca be used to drive auxiliar devices such as LED s, souders or commuicators etc. Each output is a clea cotact rela rated at 12V. The diagram below shows tpical wirig examples for the outputs: Bak Outputs Max Curret Tpe 1 1 to 8 100mA Switched -ve 2 1 to 8 100mA Switched -ve EN50131 Whe used i a EN50131 compliat sstem the OP16 caot be used o its ow. It should ol be wired as part of a dais chai of bus devices with the fial device beig a Zoe expader or a Kepad. The tamper output of the OP16 should also be wired back to a zoe iput o the alarm pael Tamper Output The tamper switch o the output module is coected to the tamper output at the top of the module. If moitorig of the lid tamper is required, this output must be coected to a suitable iput o the cotrol pael or zoe expader. Coectig Iputs The RM8 Rela Module has 8 auxiliar iputs. These iputs ca be used to activate the relas from a exteral source. Each iput is -Ve applied ad draws up to 30mA. The diagram below shows tpical wirig examples for the iputs: RM8 Rela Module The Premier Elite RM8 Rela Module is compatible with a cotrol paels that have a plug o RedCARE/Dualcom footprit. Features 8 rela outputs (12V, 3Amp each) 8 Auxiliar iputs (-ve applied) Auxiliar 12V output (protected b a 1 Amp fuse) Rela ON idicatio via LED s INS

30 Istallatio Premier Elite Series Istallatio Maual Zoe ad Output Numberig 24/48/64/88/168 Expader Zoes Kepad Zoes Address Zoes (Network 1) Zoes (Network 2) Address Zoes Network 1 Zoes Network Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Kepad Zoes Address Zoes Network 1 Zoes Network 2 Zoes Network 3 Zoes Network 4 Zoes Network 5 Zoes Network 6 Zoes Network 7 Zoes Network 8 1 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 2 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 3 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 4 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 5 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 6 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 7 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 8 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Expader/OP16 Outputs Address Outputs Network 1 Outputs Network 2 Outputs Network 3 Outputs Network 4 Outputs Network 5 Outputs Network 6 Outputs Network 7 Outputs Network 8 1 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, INS176-15

31 Premier Elite Series Istallatio Maual Istallatio Zoe ad Output Numberig 640 Expader Zoes Address Zoes Network 1 Zoes Network 2 Zoes Network 3 Zoes Network 4 Zoes Network 5 Zoes Network 6 Zoes Network 7 Zoes Network Kepad Zoes Address Zoes Network 1 Zoes Network 2 Zoes Network 3 Zoes Network 4 Zoes Network 5 Zoes Network 6 Zoes Network 7 Zoes Network 8 1 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 2 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 3 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 4 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 5 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 6 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 7 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped 8 Umapped Umapped Umapped Umapped Umapped Umapped Umapped Umapped Expader/OP16 Outputs Address Outputs Network 1 Outputs Network 2 Outputs Network 3 Outputs Network 4 Outputs Network 5 Outputs Network 6 Outputs Network 7 Outputs Network 8 1 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, 1-8 Exp. 1, Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, 1-8 Exp. 2, Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, 1-8 Exp. 3, Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, 1-8 Exp. 4, Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, 1-8 Exp. 5, Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, 1-8 Exp. 6, Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, 1-8 Exp. 7, Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 Exp. 8, 1-8 INS

32 Istallatio Zoe Coectios Termial tpes are show below. 12/12-W/24/24- W/48/64-W 48/88/168/Kepads & 8XP Expader Triple Ed Of Lie (TEOL) Premier Elite Series Istallatio Maual Use this wirig cofiguratio whe coectig PIR devices with that require Ati Mask ad Fault detectio. Several zoe wirig programmig optios are available for this, Triple EOL is illustrated below. See Zoe Wirig o page 60. Pael Zoe Termials A zoes that are ot beig used must be liked out or programmed as Not Used (see page 54 for details). Whe usig Ed Of Lie wirig, ol 1 device should ormall be coected to each zoe. Pael or Kepad Zoe Termials A zoe short ca be programmed for Active or Tamper respose (see page 71 for details). Ed Of Lie (EOL) All paels Use this wirig cofiguratio whe coectig ormall closed detectio devices to the zoe usig 2-Wires. Zoe wirig should be programmed as Double Pole/EOL (see Zoe Wirig page 60) Alarm cotact resistor = 4K7 Fault cotact resistor = 2K2 Pael Zoe Termials EOL resistor = 2K2 Pael or Kepad Zoe Termials Alarm Cotact Resistor = 4K7 Whe usig this cofiguratio, ol 1 detector ca be coected to each zoe. Alterative resistor values are available see Zoe Wirig o page 60 for more details. EOL Resistor = 2K2 Normall Ope Or Normall Closed Circuits This wirig cofiguratio is ormall used for ke switches with a N/O or N/C cotact. Zoe wirig optios are provided for each. Whe usig this cofiguratio, o more tha 3 detectors ca be coected to each zoe. Premier Elite 48/88/168 & 640 Double Pole Use this wirig cofiguratio whe coectig ormall closed or ormall ope detectio devices to the zoe usig 4-Wires. Zoe wirig should be programmed as Double Pole/EOL (see Zoe Wirig page 60) Testig Zoes To test zoes prior to commissioig, use the View Zoe Status optio i Egieers Utilities see page 132 Whe usig this cofiguratio, o more tha 10 detectors ca be coected to each zoe. 32 INS176-15

33 Premier Elite Series Istallatio Maual 60IXD Zoe Expader The 60iXD expader provides the followig facilities: Two id loops each supportig up to 30 biscuits Fused 12V output for powerig detectors Egieer s kepad port for local id diagostics Istallatio Before coectig the 60iXD expader module, isolate ALL power from the cotrol pael (AC mais ad batter), do ot cotiue if there is still power preset o the cotrol pael. 1. Coect the id expader to the cotrol pael, see 60iXD istallatio maual (INS261) for details. 2. Coect the id devices to the expader module, see id Coectios. 3. Reappl power to the cotrol pael ad program the ecessar optios o the pael see 60IXD istallatio maual (INS261) for details. id Coectios Each id biscuit is coected across a two-wire detector loop. Apart from observig the correct polarit, a wirig cofiguratio ca be used, as show i the diagram below: LOOP iXD LOOP As LOOP 1 Cable Legth Maximum Number of Biscuits 100m m m 7 800m 3 Istallatio If a differet tpe of cable is used, the distaces should be recalculated. e.g., if 7/0.4mm cable is used, a sigle ru of 200m would support 30 devices o the ed as the resistace of the cable is halved. Whe istallig the id loop it is usuall more practical to ru several cables from the expader module to the differet areas of protectio. This effectivel reduces a distace problems ad makes fault fidig much easier. To reduce the risk of iduced iterferece ad wherever possible, cables should ot be positioed alogside mais power, telephoe or other data trasmissio cables, or ru withi the same ductig or trukig as a other cables. The wirig for the sstem s iteral souders (loudspeakers) should ot be coected i the same multi-core as the id loop. Biscuit Coectios Each id biscuit is idetified b its ow umber 01 to 30 ad cotais its ow iteral sesor that is cotiuousl moitored b the expader module. The diagram below shows the coectios to the biscuit for moitorig both tamper ad alarm cotacts. LOOP + id Biscuit Tamper 01 Biscuit id 08 Yellow White 07 Blue Alarm LOOP - * The 60iXD expader module is supplied with 4 off 10F capacitors i the spares pack. It is recommeded that ou coect a 10F capacitor approximatel at the half wa poit of each id spur. It is especiall importat to do this o id spurs that are less tha 30 metres. Cablig Cosideratios The id loop ca be wired usig stadard 4-core alarm cable, this allows 2 cores to be used for the id biscuit ad 2 cores for supplig 12V power for PIR's etc. Whe the tamper switch is opeed, the id biscuit is take offlie ad a tamper coditio is geerated b the cotrol pael. If the alarm switch is opeed the biscuit's iteral sesor chages state ad the cotrol pael will see this as a active coditio ad will respod as appropriate. The diagram below shows the tpical wirig of a biscuit to a stadard PIR. The umber of biscuits that ca be coected per cable ru is determied b the impedace of the cable used. Stadard 4-core alarm cable (7/0.2mm) has a resistace of approximatel 8 Ohms per 100 metres. The followig table shows the maximum umber of biscuits that ca be coected at the ed of a sigle cable ru usig stadard 4-core alarm cable: id is a registered trade mark of Chloride Safet Sstem Limited. INS

34 BATT OFF JP1 SCB JP2 LC ON OFF JP3 Fault Rela Made I Eglad Tamper Rela Test T MSW 2 1 Strb S C TEXECOM V D Tmp C Bell B +12V A BATT OFF JP1 SCB JP2 LC ON OFF JP3 Fault Rela Made I Eglad Tamper Rela Test T MSW 2 1 Strb S C TEXECOM V D Tmp C Bell B +12V A Istallatio Auxiliar/Fault Coectios The Aux/Fault termials allow the cotrol pael to moitor the tamper & fault loops of exteral devices such as power supplies etc. Premier Elite Series Istallatio Maual (S) Strb Strobe output, switches to 0V i alarm ad is rated at 500mA. Normall coected to strobe -ve o the souder (where applicable, coect the strobe +ve to +12V). For EN50131 & INCERT istallatios the Bell & Aux Tamper must be wired to a zoe. Grade 2 Istallatio Cotrol Pael Texecom Premier Souder +12V (A) Trigger -ve (B) Tamper (C) 0V (D) Strobe -ve (S) If the Aux/Fault termials are ot beig used the must be liked out. Grade 3 Istallatio Cotrol Pael Texecom Premier Elite Souder Speaker Coectios This output ca be used for drivig up to oe 16 or two 8 loudspeakers as show below: = Optioal ON SAB The Aux/Fault rela should be programmed as Fault Grade 3 Istallatio (Usig a Zoe) Cotrol Pael Texecom Premier Elite Souder For details o testig Speaker outputs, see page 129. Exteral Souder Coectios The followig termials have bee provided for coectio to a exteral souder: (A)+12V 12V suppl (protected b a 1A fuse F4). Normall coected to +12V o the souder. (B) Bell Souder output, switches to 0V i alarm (SAB) ad is rated at 500mA. Normall coected to Trigger -ve o the souder. This output ca also be programmed for SCB operatio (see page 70 for details). (C) Tamp Negative tamper retur. Normall coected to Tamper Out o the souder. If this termial is ot beig used, it must be coected to 0V. (D) 0V 0V suppl. Normall coected to 0V o the souder. Aux/Fault Wire the Souder Tamper Rela to these termials Zoe? Wire the Souder Fault Rela to a Zoe, loopig out the Tamper coectio. The zoe should be programmed as Auxiliar see page 57 ad the wirig tpe set as WD Moitor see page 60 OP? (Optioal) Use a pael output wired to the Test termial ad programmed as WD Test Active see page 85.This will allow activatio of the Test Mode remotel from the Diagostics fuctio i Witex. 34 INS = Optioal For details o testig the Bell outputs, see page 129 ON SAB

35 Premier Elite Series Istallatio Maual Pael Outputs The cotrol pael has five programmable outputs, which ca be used to drive auxiliar devices such as LED s, souders or relas etc. (see page 83 for details). The table below shows the electrical characteristics for each output: No Max Curret Tpe 1 500mA Switched -ve 2 500mA Switched -ve 3 ** 500mA Switched +ve 4 ** 500mA Switched +ve 5 ** 3A Rela ** 88/168 & 640 ol Wirig Outputs The diagram below shows some tpical wirig examples: Digicom Outputs 1-8 Istallatio The cotrol pael has eight programmable outputs, which ca be used for coectig to a stad-aloe commuicator (see page 84 for details). The table below shows the electrical characteristics for each output: Termial Max Curret Operatio 1 100mA Switched 0V 2 100mA Switched 0V 3 100mA Switched 0V 4 100mA Switched 0V 5 100mA Switched 0V 6 100mA Switched 0V 7 100mA Switched 0V 8 100mA Switched 0V L/M N/A 12V applied = Lie Fault * R/R N/A 0V applied to reset DC+ N/A +12V Power (ufused) DC- N/A 0V Power * Cotrol Pael Lie Fault Iput (L/M) I accordace with BSIA form 175, the lie fault iput o the cotrol ca detect a sigle or a dual lie fault for use with the ATS Remote Test output tpe Wirig a Stad Aloe Commuicator The diagram below shows a tpical wirig example: Stad Aloe Commuicator Cotrol Pael Lie Fault Power C 12V 0V 1 L / M R / R DC + DC - 1 Chael Iputs Programmed as Positive Removed Digicom Outputs For details o testig outputs, see page 129 For details o testig the digicom outputs, see page 129 INS

36 Istallatio Premier Elite Series Istallatio Maual 2-Wire Smoke Detector Pael Output 1 ca be used for coectig up to 10, 12V 2-Wire smoke detectors. To eable 2-Wire smoke detectio o pael output 1, a jumper lik must be fitted across the bottom two pis of JP10. The Area Optio 2-Wire Smoke also eeds to be eabled (see page 67). 2-Wire smoke detectors ca ol be coected to pael output 1 Expader Auxiliar Iput This iput ca be used for moitorig a remote power suppl that has a voltage free output for the followig three coditios: AC Mais Fail, Batter Fail, 12V Fail ad Tamper. Aux Iput Whe the Auxiliar Iput is programmed as PSU Moitor the sstem will respod as follows: Tamper 12V Fail Batter Fail A/C Fail Resistace Respose Closed Closed Closed Closed 0R No Faults Closed Closed Closed Ope 2K2 AC Fail Closed Closed Ope Closed 4K7 Batter Fail Closed Closed Ope Ope 6K9 Batter Fail + AC Fail Closed Ope Closed Closed 10K 12V Fail Closed Ope Closed Ope 12K2 AC Fail + 12V Fail Closed Ope Ope Closed 14K7 Batter Fail + 12V Fail Closed Ope Ope Ope 16K9 AC Fail + Batter Fail + 12V fail Ope O/C Lid Tamper 36 INS176-15

37 Premier Elite Series Istallatio Maual Plug-o Commuicators Istallatio The cotrol pael ed of the coector should be attached with the red lead o the left most pi of the digi modem coector. The Com300 is a multi-format 8-chael digital commuicator/300- baud modem for use with a stadard aalogue telephoe lie. The Com2400 is a multi-format 8-chael digital commuicator/2400- baud modem for use with a stadard aalogue telephoe lie i additio, this modem ca also sed Short Message Service (SMS) text messages to a mobile phoe. These Commuicators ca be used to report sstem evets to a Alarm Receivig Cetre usig Fast Format, Cotact ID or SIA Level II or to upload/dowload cotrol pael iformatio usig the Witex UDL software ad a PC. Pluggig o the Commuicator Esure that the board is the correct wa up (see below). Locate the plug ito the commuicator socket o the cotrol pael ad lie up the moutig holes with the pillars i the base. Oce all the holes lie up, press dow getl util the pillars sap ito the holes. Stadard Telephoe Lie Coectios A stadard telephoe lie must be coected to the Com300 or Com2400 commuicator as show below: ComPort+ The Premier Elite ComPort + plugs ito the oboard digi coector o Premier Elite 12/24/48/64/88 & 168 cotrol paels allowig use of Com Port W/24-W & 48/64-W Coectio Carefull lift the cotrol pael PCB ad fix the COM uit ito the space provided with the coectio lead attached. Premier Elite 640 alread has Com port 3. V3 firmware is required to eable the device, which whe used allows coectio of a device listed i the Com 3 dropdow meu, or coectio to a local PC via a USBCom for upload/dowload capabilit. PCB Laout ad Coectios The figure below shows the PCB laout of the Premier Elite ComPort + BARCODE JP1 JP2 The red lead should be positioed o the uppermost pi of the COM uit. ComPort 3 Device or USBCom Digi Pis Coectio (SELV) INS

38 JP10 Com2 Istallatio Premier Elite ComPort + Istallatio To istall the Premier Elite ComPort + proceed as follows: Esure that all power is removed from the cotrol pael before coectig the Premier Elite ComPort +. Plug the Premier Elite ComPort + oto the 10 wa oboard digi pis o the cotrol pael. Re-appl power to the sstem ad proceed to the ext sectio. BARCODE Premier Elite Series Istallatio Maual flashig to V3. V3 paels cotai additioal hardware, a DTMF chip, to allow correct fuctioalit. Hardware Idetificatio Premier Elite 24 F9 The DTMF chip is located below the Barcode label ad is idetified with a gree dot. JP1 JP2 Box Tamp Premier Elite 48/88/168 & 640 The DTMF chip is located just below the digi pis ad is idetified with a gree dot. Premier Elite 168 show Programmig the Cotrol Pael F8 The cotrol pael will the eed to be programmed correctl i order for the Premier Elite ComPort + to fuctio as expected: Programme Premier Elite ComPort + F3 Eter the egieer code Press the / (UDL/Digi Optios). Press the / for (Com Port Setup/Oboard Digicom). Press / the to select Nothig Fitted Egieer REM Press / USBCom If the Premier Elite ComPort + is beig used simpl for local coectio of a laptop o further programmig is required. The device will allow coectio to the cotrol pael from a local PC. ComPort 3 If the Premier Elite ComPort + is beig used to eable Com 3 for oe of the optioal devices listed o Com 3 it should be programmed i the same maer as Com 1 or 2. Please see the Premier Elite Istallatio Maual INS176 for detailed istructios. F1 V Premier Elite 12-W/24-W/48/64-W 100m V = 1 Amp F2 0.75A 0.3A Batt Charge F4 F5 F6 Tamper Disable PCB Laout ad Coectios F7 F8 BAR CODE The DTMF chip is located to the left of the mai processor ad is idetified with a gree dot. OPTIONS The figure below shows the PCB laout of the Premier Elite Speech Module. 4! USE WITH TEXECOM PSU ONLY Speech Module Itroductio The Premier Elite Speech Module provides four recordable 10 secod audio messages, each message is assiged to a Digi Chael, which i tur ca be triggered from oe of the ma output fuctios of the cotrol pael. A COM2400 must be istalled to eable the Premier Elite Speech Module, it will ot fuctio with a COM300. Ol the first four Digi Chaels are used b the Premier Elite Speech Module. The Premier Elite Speech Module is supported b the followig Texecom cotrol paels: Premier Elite all models factor built V3 ad later, fitted with a DTMF decoder. It is ot possible to eable earlier versios of cotrol pael to fuctio with the Premier Elite Speech Module b Figure 1. Premier Elite Speech Module PCB Laout Microphoe Record/Pla Idicator Cotrol pael coector Record Buttos INS176-15

39 Eg Kepad Aux 12v 1Amp Network 1 1Amp Network 2 1Amp Com 2 Com 1 Premier Elite Series Istallatio Maual Istallatio F9 ComGSM this meas the ca be used for both alarm reportig ad upload/dowload via IP (GPRS) If a data umber is also available, it is possible to use upload/dowload via the data umber (GSM) istead of the IP address. F3 F5 F1 SIM cards ca have two differet phoe umbers: Tx1 Rx1 Tx2 Rx2 Load Defaults Expasio JP7 Voice Number: used for voice calls ad SMS Data Number: used for GSM data calls (Upload/Dowload) Either of these facilities ca be eabled/disabled b the operator. Figure 2. Premier Elite Speech Module Coected to Expasio Port o PCB Premier Elite Speech Module Istallatio To istall the Premier Elite Speech Module proceed as follows: 1. Esure that all power is removed from the cotrol pael before coectig the Premier Elite Speech Module. 2. Plug the Premier Elite Speech Module (see Figure 2) oto the 7 wa Expasio Port of the cotrol pael. 3. Plug the COM2400 oto the Oboard digi pis, ad coect to a telephoe lie. Re-appl power to the sstem ad proceed to the ext sectio. Com GSM The Premier Elite Com GSM is a 2G module that ca be coected to a Premier Elite cotrol pael; however fuctioalit differs depedig o the tpe of Premier pael istalled ad the tpe of SIM card that is used. The tables below show which features are available ad the tpe of SIM card required to eable the services. Premier Elite 24/48/88/168 & 640 SIM Tpe Pael Port Tpe Feature Damic GSM Fixed IP IP Module Com IP Report sstem evets (alarms, arm, disarm etc.) via text messagig to mobile telephoes Remotel arm, disarm ad obtai curret status of the alarm sstem via text messagig Upload/Dowload Via GSM Alarm reportig to IP eabled receivers (Motex for example) GPRS Upload/Dowload Via IP GPRS A secodar form of commuicatios should be used as back up where possible. Whe usig Alarm reportig over IP with Motex, SIA, Cotact ID or, Fast Format ma be used, however if usig Texbase SIA is NOT supported. Some receivers ma require a Fixed IP address, please check with our provider. The Com port tpe must be programmed as oe or the other, it is ot possible to use both GSM ad GPRS (IP Ol) fuctioalit at the same time. SIM Card Tpes SIM cards are split ito two tpes: Damic IP SIM cards the everda kid of SIM card used i mobile phoes. GSM uits that use this kid of SIM card ca access a data o the iteret but caot be cotacted from the iteret. This tpe of SIM card should be used for SMS text messagig & Upload/Dowload via GSM. A data umber will be required to uses Upload/Dowload. Fixed IP SIM cards specialist SIM cards that have a fixed, iteret public IP address which meas that i additio to beig able to access a data o the iteret the ca be cotacted from the iteret. For Premier Elite Care should be take whe usig Pa as ou go SIM cards, make sure ou have the abilit to Top Up. Pa as You Go SIM cards geerall DO NOT have data umbers, please check with our service provider. SIM cards purchase Texecom DO NOT suppl SIM cards. These will eed to be sourced locall, ad care should be take to source SIM cards i the coutr where the uit is to be used. This will help reduce costs ad avoid excessive data charges. Whe usig GSM as the commuicatio method, Data services will eed to be eabled for upload/dowload, this ma or ma ot be the same Telephoe umber. GPRS SIM card setup I order to use GPRS, the Premier Elite ComGSM must be programmed with certai parameters which are dictated b the SIM card used. This is o differet from mobile phoes (ofte called the GPRS Setup ) except that mobile phoes are ofte supplied precofigured. The cofiguratio cosists of the followig: APN (Access Poit Name) Userame Password These parameters are etered ito the Premier Elite ComGSM usig a Texecom PC program called APNProgrammer (o the Texecom CD supplied with the pael) with the Premier Elite ComGSM powered ad coected to a PC via a Texecom USBCom. To power the Premier Elite ComGSM whilst programmig coect the supplied haress to the cotrol pael com port, ad the other ed to the Egieers Kepad port o the Premier Elite ComGSM. The Texecom USBCom should be coected to the com port o the Premier Elite ComGSM. Use APNProgrammer to upload the required iformatio to the Premier Elite ComGSM. The supplier of the SIM card should provide the iformatio required. Premier Elite ComGSM Laout Atea coectio Tamper switch Com1 data coectio to Premier cotrol pael Egieer kepad coector (ol used to power the Premier Elite ComGSM whe usig APNProgrammer) Optio switches (see table below) Status LED s (see table below) Audio coector (for future use) Heartbeat LED SIM card socket INS

40 Istallatio Optio Switches The optio switches () fuctio as follows: Switch Fuctio Off O 1 Tamper GSM will ot commuicate GSM will commuicate Comms if the uit is i tamper. regardless of the tamper. 2 GPRS server Normal GSM operatio Accepts coectios o port ad allows reportig over GPRS 3 GSM/IP IP mode (19200 baud) V1.65 ad earlier ol GSM mode (9600 baud) V1.65 ad earlier ol 4 N/A For future use leave i OFF positio Status LEDs The three status LED s () idicate the followig: LED Off O Flashig 1 GSM NOT Read GSM Read GSM Commuicatig 2 Pael NOT Read Pael Read Pael Commuicatig 3 No Sigal (less tha 40% Sigal Stregth or - 88dBm) Good (better tha 66% Sigal Stregth or - 77dBm or better) Margial (betwee 40%-66% or -88 ~ - 77dBm) The sigal stregth LED works for both GSM ad GPRS modes; however the dbm readig is ol see o the kepad i GSM mode. Aerial Sitig ALWAYS do a site surve to fid a area of strog sigal before istallatio. Istallig a Com GSM with a weak sigal is bad istallatio practice. The aerial should be mouted verticall at the poit of strogest sigal. This is usuall the highest poit i the buildig (ofte the loft Premier Elite Series Istallatio Maual A mobile phoe ma be used to locate the poit of strogest sigal. The sigal stregth idicator is ormall a bar or lie at the side of the displa o the mobile telephoe. The mobile phoe method caot provide iformatio o the availabilit, sigal stregth ad iterferece status of all radio Base Statios i the surroudig area. The sigal stregth readig is idicated o the Com GSM uit b use of LED's ad ca also be read from the kepad i the "Setup Modules" meu of UDL/Digi Optios. Whe ou have idetified the poit of the strogest sigal, make a ote of this poit ad use it whe istallig the Premier Elite Com GSM aerial. Istallatio The Premier Elite Com GSM module should be istalled as close to the cotrol pael as possible, so that the haress lead supplied with the uit is able to plug oto the cotrol pael commuicatio port. The coectio haress caot be exteded. Route the haress lead ito the module housig usig the top left cable etr ad plug the coector oto COM1 () 1. Istall the module i the required locatio usig suitable fixigs. 2. Route the other ed of the haress lead ito the cotrol pael housig. DO NOT CONNECT at this poit. 3. Coect the GSM atea to the atea coector o the module () ad site the atea as high as possible. 4. Ulock the SIM socket b slidig the lockig tab dowwards. Isert the SIM card ito the holder with the chamfered corer to the top left. Push the holder back ito positio ad lock the SIM b slidig the lockig tab upwards. The SIM card must be iserted before coectig the Premier Elite ComGSM module to the cotrol pael, ad must ot be removed util after the power suppl to the Premier Elite ComGSM module has bee deactivated. 5. Set the optio switches as required, see page Now coect the haress lead oto the cotrol pael commuicatio port (COM 1 or 2 ). The module should ow be powered ad the heartbeat LED () should be flashig. You should check ad cofirm that the sigal stregth is still the same as recorded durig the site surve. Pael Cofiguratio area). Avoid istallig the aerial directl uder metal roofs or withi metal skied buildigs because this will reduce the sigal stregth ad ma ihibit operatio completel. If this is uavoidable, the strogest sigal will be foud awa from the metal roof or close to large exteral widows or sklights. Avoid istallig the aerial close (2 metres) to cable rus, ductig, structural metalwork, metal pipes, water taks ad electroic equipmet, e.g. photocopiers, fax machies etc. These ca have similar effects to metal roofs. Reliable operatio is ulikel with a low sigal stregth. If the displa shows that the sigal stregth is 40% (-88dBm) or lower, ou should improve the sigal stregth. This ma be achieved b repositioig the aerial. The GPRS aerial lead should ot be cut, therefore repositioig the aerial ma require that the Com GSM is also repositioed. Text Messagig ad Upload Dowload via GSM GSM Mode (pael port programmed as GSM Module, Damic IP SIM card) 1. Eter Egieers Programmig mode ad select UDL/Digi Optios, the select Com Port Setup. Esure Com Port is programmed as GSM Module. 2. Now select the Digi Optios meu ad make sure that Digi Optio 1 is programmed for Digi is Eabled. 3. Now select Program Digi ad esure the followig optios are programmed for oe of the ARC optios: a) Protocol: SMS Messagig. b) Primar No: The umber of the recipiet s mobile telephoe. c) Secodar No: Secodar mobile telephoe umber (if required). d) Accout No: Leave blak. 40 INS176-15

41 Premier Elite Series Istallatio Maual e) Diallig Attempts: Program as required. f) Report Areas: Program as required. g) Reports: Program as required. h) Cofig.: Program as required. i) Protocol Optios : Program as required. j) UDL Optios : Chage rigs before aswer to 1 if usig GSM Upload/Dowload. 4. All three status LED s should ow be o, if status LED 3 is off or flashig, this idicates a low GSM sigal level. If the sigal level is low, tr movig the atea to improve the receptio. Usig the SMS Cotrol Commads Cotrol commads ca be set to allow remote cotrol ad iterrogatio of the alarm sstem. 1. Select the sed text message optio o our mobile telephoe. 2. Eter the telephoe umber of the Premier Elite ComGSM module. 3. Eter the text commad, see SMS Cotrol Commads. 4. Select sed o our mobile telephoe. Whe usig the SMS Cotrol Commads show i the tables below the followig should be oted:???? = User code, this must proceed all commads. [areas] = Areas 1 to 8 or A to P. If the areas are ot specified the all areas will be selected. [s] = Sed back status report (zoes) = List of zoes, each zoe must be separated b a space e.g etc. (outputs) = List of outputs, e.g etc. (message) = A maximum of 32 characters. Premier 48/88/168/640 & Premier Elite 24/48/88/168/640 SMS Cotrol Commads Operatio Commad Example Arm Sstem???? arm [areas][s] 5678 arm s = arm all areas ad report back status. Part Arm Sstem???? parm (1/2/3)[s] 5678 parm 1 = part arm 1 all areas (o status) Disarm Sstem???? darm [areas][s] 5678 darm abcs = disarm areas abc ad report back status. Reset Sstem???? reset [areas] 5678 reset = reset all areas Omit Zoe(s)???? omit (zoes) 5678 omit = omit zoes 1, 5 ad 12 Uomit Zoe(s)???? uomit (zoes) 5678 uomit 12 = reistate zoe 12 Tur Outputs O???? op o 5678 op o 134 = tur PC outputs 1, 3 (outputs)[s] ad 4 o. Tur Outputs Off???? op off 5678 op off 4s = tur PC output 4 off ad (outputs)[s] report back status. Pulse Outputs O???? op o (outputs) 5678 op o p = pulse PC output 2 o. [p] Pulse Outputs Off???? op off (outputs) 5678 op off p = pulse PC output 2 off. [p] Sed Message???? mess (message) 5678 mess How Are You = Displas How Are You o all kepads. Sstem Status???? status 5678 status = Armed: (1-8 or A - P) Alarm: (1-8 or A - P) Output: (1-8) Mais: (OK or Fault) Batter: (OK or Fault) Phoe Lie: (OK or Fault) 5678 status O = Output Status GSM/Radio-Pad Status???? status O???? status R Armed: (1-8 or A - P) Alarm: (A - P) Chaels: (1-8) Digi: (1-8) Pael: (1-5) Mais: (OK or Fault) Batter: (OK or Fault) Phoe Lie: (OK or Fault) 5678 status R = Serial: ####### (ol if Radio-Pad fitted) NUA: ###### (ol if Radio-Pad fitted) FSS: ### (ol if Radio-Pad fitted) RSS: ### (ol if Radio-Pad fitted) BER: ### (ol if Radio-Pad fitted) CRC: ### (ol if Radio-Pad fitted) GSM-Sigal: ### GSM-BER: ### Istallatio What will be set i the Text Message The followig iformatio will be received i the text message: M Home 3 We s t e r R o a d 1 2 : / 1 2 Z o e A l a r m T h e D e t e c t o r i t h e L o u g e A r e a : A Alarm Reportig & Upload/Dowload via IP IP Mode (pael port programmed as ComIP, fixed IP SIM card) 1. Eter Egieers Programmig mode ad select UDL/Digi Optios, the select Com Port Setup. Esure Com Port is programmed as ComIP. Leave the IP address, port & gatewa blak. 2. Now select the Digi Optios meu ad make sure that Digi Optio 1 is programmed for Digi is Eabled. 3. Now select Program Digi ad esure the followig optios are programmed for oe of the ARC optios: a) Protocol:Program as required. b) Accout No: Program as required c) Diallig Attempts: Program as required. d) Report Areas: Program as required. e) Reports: Program as required. f) Cofig.: Program as required. g) Protocol Optios : Program as required. h) For Upload/Dowload via Witex edit the Accout/Pael Details ad fill i the IP address ou have bee give ad Port umber. All three status LED s should ow be o, if status LED 3 is dim, this idicates a low GSM sigal level. If the sigal level is low, tr movig the atea to improve the receptio. INS

42 Istallatio AV Module Before coectig the AV Module, isolate ALL power from the cotrol pael (AC mais ad batter), do ot cotiue if there is still power preset o the cotrol pael. To istall the AV Module oto the cotrol pael: Coect oe ed of the patch lead o to the Expasio Port of the AV Module Coect oe other ed of the patch lead o to the Expasio Port of the cotrol pael Programmig the AV Module Program the Expasio Port for AV Module operatio (see page 101 for details) Refer to the AV Module istallatio guide for full programmig details. Premier Elite Series Istallatio Maual Istallatio Geeral The istallatio of the ComIP module requires a basic uderstadig of etworkig ad TCP/IP protocol. If ou are ot familiar with these cocepts, ou ma require assistace from a IT professioal before attemptig to istall the module. The ComIP module is desiged to be fitted iside the cotrol pael ad is powered via the haress coectio. A suitable etwork cable should be fed ito the cotrol pael to allow coectio the module. PCB Laout ComIP Module The ComIP module allows the Premier Elite cotrol paels to be coected to either a Local Area Network (LAN) or Wide Area Network (WAN). The iteret is cosidered as a WAN. Oce the cotrol pael is coected to a etwork the followig features ca be achieved: Upload/Dowload via Witex UDL Sigal alarms to a Alarm Receivig Cetre High securit pollig b Alarm Receivig Cetre Tpical LAN cofiguratio 5-wa haress coectio to cotrol pael ComIP Status LEDs Network status LED (Left) RJ45 etwork Coectio Network status LED (Right) MAC address Istallatio 1. Select Egieers mode o the cotrol pael the remove the cotrol pael lid. 2. Choose a suitable locatio for the module. Remember to allow eough space to plug i the etwork cable ad coect the haress lead (supplied). 3. Fit the 4 self-adhesive feet supplied to the four moutig holes. Remove the self-adhesive backig paper ad secure to the base of the cotrol pael. 4. Coect the 5-wa ed of the haress to the 5-wa coector o the module. 5. Coect the other ed oto a cotrol pael commuicatio port. 6. Coect the etwork cable to the RJ45 coectio o the module. The etwork status LED s idicate the followig: Left LED Right LED Meaig Tpical WAN cofiguratio Off Off No Lik Off Solid Amber 100BASE-T Half Duplex Lik Off Blikig Amber 100BASE-T Half Duplex; Activit Off Solid Gree 100BASE-T Full Duplex Lik Off Blikig Gree 100BASE-T Full Duplex; Activit Solid Amber Off 10BASE-T Half Duplex Lik Blikig Amber Off 10BASE-T Half Duplex; Activit Solid Gree Off 10BASE-T Full Duplex Lik Blikig Gree Off 10BASE-T Full Duplex; Activit 42 INS176-15

43 PR X PR X F OK e P b OK Premier Elite Series Istallatio Maual Commissioig The cotrol pael must be programmed correctl i order for the module to fuctio as expected. The followig sectio covers the items that eed to be cofigured o the cotrol pael i order to make the ComIP module operate correctl. The actual details o how to program the followig items ca be foud i the relevat cotrol pael istallatio maual. ComIP Address Each TCP/IP ode o a etwork host has a uique IP address. This address provides the iformatio eeded to forward packets o the local etwork ad across multiple etworks if ecessar. IP addresses are specified as x.x.x.x, where each x is a umber from 1 to 254; for example, The ComIP must be assiged a uique IP address to use o a TCP/IP etwork. If the address is left blak or is programmed as the ComIP module will tr to automaticall obtai a IP address from a DHCP server (if oe is ruig o the etwork). Tpical LAN cofiguratio Icoic Kepad OK 0 Premier or Premier Elite Cotrol Pael Witex Upload/Dowload ComWiFi Module Wireless Router PC ios or Adroid Device Istallatio ComIP Port The port umber used to idetif the chael for remote iitiated coectios. The default settig is The rage for port settigs is: except for the followig reserved ports: Port Numbers Reserved for Tpical WAN cofiguratio Premier or Premier Elite Cotrol Pael Reserved (well kow ports) 9999 Telet setup Reserved Reserved Icoic Kepad F OK 0 e P b ComWiFi Module Router or Gatewa Iteret Witex Upload/Dowload Recommeded for raw socket coectios ComIP Gatewa The gatewa address, or router, allows commuicatio to other LAN/WAN segmets. The gatewa address should be the IP address of the router coected to the same LAN segmet as the ComIP. The gatewa address must be withi the local etwork. Witex Upload/Dowload Network Hub/Switch ios or Adroid Device ComIP Netmask A etmask defies the umber of bits take from the IP address that are assiged for the host sectio. The default mask is (8 bits). ComWiFi The ComWiFi module allows the Premier & Premier Elite cotrol paels to be coected to either a Local Area Network (LAN) or Wide Area Network (WAN). The iteret is cosidered to be a WAN. Oce the cotrol pael is coected to a etwork the followig fuctios ca be achieved: Cotrol the alarm sstem usig the Texecom mobile apps, ad sed push otificatios Upload/Dowload via Witex UDL Two Modules are available CEK-0001 Premier Elite ComWiFi (PCB Atea) CEK-0002 Premier Elite ComWiFi SMA (Exteral Atea) Supported Cotrol Paels The ComWiFi module is supported o the followig Premier & Elite Series cotrol paels: Premier Elite 12/24/48/88/168 & 640 Premier 48/88/168 & 640 V7 or later Geeral The istallatio of the ComWiFi module requires a basic uderstadig of etworkig ad TCP/IP protocol. If ou are ot familiar with these cocepts, ou ma require assistace from a IT professioal before attemptig to istall the module. The ComWiFi module is desiged to be fitted iside the cotrol pael ad is powered via the haress coectio supplied. Oboard or Exteral Atea For polcarboate paels, either the ComWiFi with itegral atea or the ComWiFi with exteral atea ma be used. For metal paels the ComWiFi with exteral atea is required. A 6.5mm hole will eed to be drilled i the cotrol pael housig to mout the exteral atea. INS

44 Istallatio Metal Pael (CEK-0002) Polcarboate Pael (CEK-0001 or CEK0002) Small Pol & Livefrot PCB Laout 2 A B C Drill 6.5mm hole 3 Drill 6.5mm hole Large Pol Drill 6.5mm hole Istallatio Premier Elite Series Istallatio Maual The ComWiFi module requires some iitial setup that caot be doe through the cotrol pael or Witex. This step b step guide will allow ou to achieve the followig ad should be carried out i the order detailed i the maual. Istallatio o Iitial Module Setup o Chage Default Accout Settigs Damic IP address Assig a IP address mauall o Reserve the IP address o Set the DHCP Pool Setup Port Forwardig o the Router Setup Push Notificatios Programme the Cotrol Pael Chagig other settigs withi the setup pages ma cause icorrect operatio of the ComWiFi ad ou will be advised to retur the uit to factor settigs. Iitial Module Setup These steps MUST be carried out FIRST. Coect the ComWiFi oto the comport of the cotrol pael usig the lead provided. Usig a Wi-Fi eabled computer, tablet or mobile device sca for ew wireless etworks. Select the 'Com WiFi' etwork. Eter the etwork ke password texecom2015 ad press coect. O the same device ope the Web browser ad tpe the IP address ito the address bar. You will eed to eter the user ame as master ad the password as You are ow olie with the ComWiFi module, ad should see the sstem image show o the followig page. Take a ote of the STA Mode MAC Address. STA Mode MAC Address : : : : : wa haress coectio to cotrol pael 2. LED Idicators (see table below) a. Hardware flow cotrol (CTS) (for future use) b. Sigal Stregth c. Hardware flow cotrol (DTR) (for future use) LED Off O Slow Flashig A & Uit Not OK N/A C coected No or Good Low (better tha Sigal 66% Sigal Margial B (less tha Stregth) (betwee 40% 40%-66%) Sigal Stregth) 3. Atea/Atea coectio Fast Flashig Commuicatio with pael N/A Chage Password & User Name Before proceedig it is importat to chage the User Name ad Password i order to keep the ComWiFi secure. Click o Accout o the left side of the scree ad the eter a ew User Name ad Password followed b Save. You will be prompted to Restart the uit. Oce the uit has restarted recoect if required ad cotiue. Please ote it is NOT possible to retrieve the User Name & Password oce it has bee chaged. You will have NO access to the device without it. It is ot possible to default the uit without the User Name & Password. 44 INS176-15

45 Premier Elite Series Istallatio Maual Istallatio Automaticall Assiged IP Address (DHCP) DHCP (Damic Host Cofiguratio Protocol) is b far the most commo method for routers to assig devices IP addresses so that the ca use WiFi or hardwired coectios to access the Iteret ad other resources o the etwork. IP addresses will be assiged, from a "pool" for a "lease" time, ad ca chage from device da to da; for example whe ou leave our home ad lose WiFi coectio there is o guaratee whe ou retur that ou will be give the same address, it ma be i use b somethig else. If ou allow the wireless router to automaticall assig a IP address to the ComWiFi ou ma ecouter problems with IP coflicts if: Aother device o the etwork has ever used the address (ad could do so agai) The ComWiFi is off lie ad aother device is give the address b the router Assigig a IP address Before proceedig ou should esure ou ca access the wireless router as chages will eed to be made to esure the ComWiFi will fuctio as expected; ad so that ou ca cofigure the router to allow access from the outside world (WAN) should ou require. You will eed to kow the followig; the default iformatio should be available from the router documetatio: The router's SSID (wireless etwork ame) The WiFi password The IP address of the router The router password Before assigig a IP address it is importat to uderstad how IP addresses work ad the impact this ca have o the performace of the sstem ad the ComWiFi. IP Address Iformatio Each TCP/IP ode o a etwork host has a uique IP address. This address provides the iformatio eeded to forward packets o the local etwork ad across multiple etworks if ecessar. To overcome these potetial issues it is advised that the IP address is either reserved for the ComWiFi, or the IP address used for the ComWiFi is outside of the DHCP Pool. Accessig the Router O a PC ope the web browser ad tpe the router's IP address ito the address bar as show ad press eter. Values used are tpical ol; the ma or ma ot be the same as the router. Whe prompted eter the router user ame & password ad press Eter. Oce ou have access to the router ou are lookig for DHCP Settigs. The example show ma or ma ot be the same as the router. You will see a Start & Ed IP address, this is the DHCP pool or the rage of addresses used b the router whe assigig ad address automaticall. IP addresses are specified as x.x.x.x, where each x is a umber from 1 to 254; for example, The ComWiFi must be assiged a uique IP address to use o a TCP/IP etwork. If the address is left blak or is programmed as the ComWiFi module will tr to automaticall obtai a IP address from a DHCP server (if oe is ruig o the etwork). Port Numbers The port umber used to idetif the chael for remote iitiated coectios. The default settig is The rage for port settigs is: except for the followig reserved ports: Port Numbers Reserved for Reserved (well kow ports) 9999 Telet setup Reserved Reserved Recommeded for raw socket coectios Gatewa The gatewa address, or router, allows commuicatio to other LAN/WAN segmets. The gatewa address should be the IP address of the router coected to the same LAN segmet as the ComWiFi. The gatewa address must be withi the local etwork. Netmask (Subet Mask) A etmask defies the umber of bits take from the IP address that are assiged for the host sectio. The default mask is (8 bits). You ow kow the address rage beig used b the router. The Default Gatewa is the actual router itself. So ou ca ow decide how ou wat to cofigure the ComWiFi, either method is valid, but the both require differet steps. Damic IP Address (DHCP Reservatio required) With this method ou will be assiged a address from the DHCP pool ad will eed to reserve the address for the ComWiFi. O the WiFi eabled device where ou accessed the ComWiFi do the followig. Click o the STA tab o the left side of the scree. Esure Obtai a IP Address Automaticall is Eabled. Uder the 'Network Name' click o Sca ad the select the WiFi etwork. This is the ame of the wireless router (SSID) that is coected to the iteret. Eter the router password if required. Click Save. Whe prompted Restart the device, discoect from the ComWiFi Oce the device has restarted refresh the page or recoect to the ComWiFi ad ope the STA page. Take ote of the IP address, subet mask, Gatewa & DNS Server for the etwork. For Example IP = INS

46 Istallatio Subet mask = , Gatewa = & DNS = Click Save ad Restart, ou ca the close the web browser. The uit will restart durig this period. IP Address Subet Mask Gatewa DNS Record the details here Re-sca for wireless etworks o the WiFi device ad coect to the Wi-Fi router. I the web browser o a PC o the same etwork, ou should be able to coect to the ComWiFi with the ew IP address ou have give it. This will prove the settigs have bee accepted. Premier Elite Series Istallatio Maual Eter the router password if required. Eter the chose IP address for example Eter the subet mask (usuall ) but ca be foud o the router. Eter the Gatewa IP address (the router) Eter the DNS Server details (usuall same as the router) Click Save. Whe prompted Restart the device. Re-sca for wireless etworks o the WiFi device ad coect to the WiFi router. If ou caot fid all of the required details o the router, simpl follow the istructios to automaticall assig ad IP address, ad the disable DHCP ad overtpe the IP address with the oe ou have chose that is outside the DHCP pool. I the web browser o a PC o the same etwork ou should ow be able to coect to the ComWiFi with the ew IP address ou have give it. This will prove the settigs have bee accepted. Port Forwardig WARNING: Care should be take whe opeig ports as this ca leave the router vulerable to malicious attacks. To allow the sstem to commuicate with the outside world, ad vice versa, port forwardig must be eabled o the router for the ComWiFi. The below example is tpical, however please check the router's documetatio or the maufacturers website for more iformatio. This will be required i order to use the app remotel. To setup Port Forwardig do the followig. Coect to the Router Look for settigs for "Forwardig, or "Port Forwardig" these could be uder advaced settigs, or i the Firewall settigs. Each maufacturer is differet. Oce ou have foud the optio ou will have somethig like this. I this example the IP address assiged to the ComWiFi is withi the DHCP Pool, ad should therefore be reserved so that it caot be used b aother device. DHCP Reservatio O the PC check for DHCP or Address reservatio. You should have somethig like this. Click Add New or whatever the router displas ad eter the required details. The MAC address ou oted dow o page 44 will be required, as will the IP address of the ComWiFi. Oce ou have etered the details press Save. Mauall Assigig a IP Address (Outside DHCP pool) With this method ou will be assigig a address to the ComWiFi which is outside of the DHCP pool. IP address rages go from I the example i the previous sectio we ca see that the IP address rage o the router starts at ad eds at We ow have the optio of assigig a address betwee 2-49 or O the WiFi eabled device where ou accessed the ComWiFi do the followig. Add a ew rule usig the ComWiFi IP address ad Port Number ou used earlier. Some routers ma require use of the MAC address to allow port forwardig. Please check with the maufacturer s documetatio or website for details. Remote Coectios (WAN) Before attemptig to coect to the sstem from a remote locatio, please read the sectio o Port Forwardig, this will eed to be doe to allow access from outside of the LAN. Fixed IP address (Ucommo) If ou have a fixed IP address iteret coectio, complete all of the details above, BUT replace the Host Address with the Fixed IP address provided b the Iteret Service Provider. Damic IP Address (most commo) It is most likel that ou have a Damic IP address assiged b the service provider. This basicall allows the Local sstem to coect to the outside world (Iteret WAN), ad ca chage frequetl. Because of the ature of Damic addresses ou will eed a third part service to maage the IP address to esure ou ca alwas coect to the sstem. You should search for a Damic DNS service provider, who ma or ma ot charge a fee for the service. Oce ou have the service the Host Address will be replaced b the details give to ou b the DDNS provider. Click o the STA Settig tab o the left side of the scree. Esure Obtai a IP Address Automaticall is Disabled. Uder the 'Network Name' click o Sca ad the select the Wi-Fi etwork. This is the ame of the wireless router (SSID) that is coected to the iteret. 46 INS176-15

47 Premier Elite Series Istallatio Maual Defaultig the Com WiFi Factor Settigs If ou are experiecig coectio problems we would first suggest returig the ComWiFi to factor settigs. The below steps provide a step b step guide o how to do this. Usig a Wi-Fi eabled computer, tablet or mobile device sca for ew wireless etworks. Select the 'Com WiFi' etwork. Eter the password texecom2015 ad press Coect. Ope a Web browser ad tpe the IP address ito the address bar. You will eed to eter the user ame ad password that ou have setup previousl. Click o 'Restore' o the left side of the scree. Click o 'OK' to restore factor settigs. All user data icludig the user ame ad password will be set back to default ad ou should start the process agai from the begiig of this maual. The Restore process ca take several miutes, so please be patiet. Coectig a Computer Istallatio The 12, 24, 48, 88, 168 & 640 all support local uploadig ad dowloadig betwee the cotrol pael ad a PC ruig Witex UDL software. Uploadig ad Dowloadig ca be used to program ad iterrogate the cotrol pael. I order for the computer to work correctl, esure that it is set to the followig: UDL Password (see page 98 for details) I order to upload ad dowload to the cotrol pael locall, a USB/PC-Com lead is required. Coectig a Priter The 12,24,48,88,168 & 640 all support priter facilities. The priter is coected to the Com 1 coector located o the cotrol pael ad ca be used to prit the cotrol pael evet log. USB-Com The USB-Com has two coectors. The USB coector is for coectio to a USB port o a computer ad the Molex coector plugs oto a Com port o the cotrol pael. I order for the priter to work correctl, esure that it is set to the followig: Baud Rate = 4800 Parit = Noe Start Bits = 1 Stop Bits = 2 Data Bits = 8 DTR = Normal Colums = 40 or 80 (see page 72) I order to coect a priter to the cotrol pael, a PC-Com ad 9-25Wa Null Modem Lead/coector is required PC-Com The PC-Com has two coectors. The 9-wa D-tpe coector is for coectio to a serial port o a computer ad the Molex coector plugs oto a Com port o the cotrol pael. Coect to COM1 PC-Com 9-25 Wa Null Modem Lead DATAC or RS232 priter INS

48 Commissioig ad Troubleshootig Premier Elite Series Istallatio Maual 4. Commissioig ad Troubleshootig Commissioig Oce ALL coectios have bee made to the cotrol pael ad power is read to be applied, ou should read this sectio before cotiuig. Whe applig power for the first time, the factor default settigs must be loaded. The default settigs esure that the cotrol pael software is reset ad all programmig iformatio is loaded ito memor. For a complete list of factor default settigs, see separate Quick Referece Guide. The factor default settigs are loaded b applig power to the cotrol pael whilst at the same time, holdig dow the Factor Default butto. To default the cotrol pael, proceed as follows: Coect the black batter lead to the egative ( ) termial of the stadb batter ad the red batter lead to the positive (+) termial of the stadb batter Press ad hold the Factor Default butto Press the batter kick-start butto to coect the batter ad esure that the gree heartbeat light illumiates After the heartbeat light has illumiated, let go of the Factor Default butto (the heartbeat light will cotiue to flash whilst the factor default settigs are beig loaded, this ca take up to 30 secods) If the sstem goes ito alarm, eter the default Egieer code 1234, ad the alarm toe will stop To access the Egieer Programmig Meu, eter the default Egieer code 1234 V3 paels will prompt ou to select the operatig laguage, oce the selectio is made the pael will chage to that laguage. V3 paels will prompt ou to select the Coutr Code to ooad the correct defaults. Oce the selectio is made the pael will default ad load the selected Coutr Code defaults. The "Cofirm Devices" meu will appear check ad make sure all istalled Kepads ad Expaders are showig, press Yes ad Yes agai to cofirm. V2.10 >If a Ricochet eabled expader is idetified, the sstem will eter the Lear fuctio for devices, this ew dedicated meu ca be accessed at a poit from the top level meus b pressig the ke. See page 56 & 143 for details. Program the sstem as described i sectio 5 (Programmig the Cotrol Pael) Perform a zoe test as described o page 131. Remember that some powered detectors (e.g. PIR s ad combied techolog detectors) take up to 180 secods to warm up ad become operatioal Test the iteral souder, exteral souder ad strobe as described o page 131 Replace the lid ad secure with the lid screw supplied Press 0 followed b YES to leave the programmig meu, the sstem will retur to ormal The displa will be showig that there is a Mais Power Off coditio. Switch o the AC mais suppl to the cotrol pael The ormal baer message (if programmed) will ow be displaed Istallatio is ow complete ad the sstem is read for use. Trouble-Shootig Cotrol Pael No Power to uit (mais ol) Check the mais block fuse ad replace if blow Check for loose wires at the mais block, the trasformer ad the AC termials o the PCB Check the mais block is coected correctl; live to live (brow), eutral to eutral (blue) No Power to uit (batter ol) Do t forget to press the batter kick-start butto Check for loose wires at the BATT termials o the PCB Check that the batter wires are coected correctl; red from BATT+ to the batter positive (+), black from BATT- to the batter egative (-) Heartbeat LED is ot flashig Remove ALL power (AC Mais ad Batter) ad the reappl power agai Network Data LED s are ot flashig Remove ALL power (AC Mais ad Batter) ad remove ALL wires from the etwork termials. The re-appl power agai before referrig to the Network Diagostics table o page 21 Kepads Kepad does ot operate Check that the kepad is wired correctl from the cotrol pael (see page 20 for wirig details) Check the etwork fuses F3 ad F5 ad replace if blow* Use the etwork diagostics (see page 21 for details) *Ol o 48/88/168 Kepad does ot accept codes If the sstem has more tha oe kepad check that each kepad is addressed differetl, see page 23 for details If the kepad is o a log cable ru, check the voltage betwee the + ad termials at the kepad ad esure that it measures o less tha 10.0V Check that ou are usig the correct User codes. The default Egieer code is 1234 ad the default Master User code is 5678 Check that the User code ou are usig is ot Time Locked, if the User code is time locked the the access code will ol be accepted whe Cotrol Timer 1 is off (see pages 75 ad 126 for details) Kepad zoes do ot operate Each kepad zoe has to be mapped oto the sstem before it ca be used (see page 80 for details) The zoe is ot programmed (see page 54 for details) Kepad emergec kes do ot operate Each kepad ca be cofigured so that the emergec kes PA, FIRE ad MEDICAL ca be eabled or disabled. Check that the kepad has bee programmed correctl (see page 80 for details) 48 INS176-15

49 Premier Elite Series Istallatio Maual Commissioig ad Troubleshootig Expader Expader does ot operate at all Check that the expader is wired correctl from the cotrol pael (see page 20 for wirig details) Check the etwork fuses F3 ad F5 ad replace if blow* *Ol o 48/88/168 Sstem does ot recogise zoes If the expader is o a log cable ru, check the voltage betwee the + ad termials at the expader ad esure that it measures o less tha 10.0V The speaker output does ot work The expader ca be cofigured so that Alarm, Etr, Exit, Chime toes etc. ca be eabled or disabled. Check that the expader has bee programmed correctl (see page 82 for details) The speaker volume o the expader is electroicall adjustable. Check the volume is set to the desired level (see page 82 for details) Zoes Operatio The sstem will ot allow me to arm Check that there are o outstadig problems (see page 50 for details) Check that there are o outstadig alarms that require resettig Check that the User code has bee programmed to allow armig (see page 126 for details) Check that the User code has bee assiged to the correct areas (see page 123 for details) If a Local User code is beig used (see page 126 for details) esure that the kepad beig used is assiged to the correct area (see page 79 for details) The sstem will ot allow me to disarm Check that the User code has bee programmed to allow disarmig (see page 126 for details) Check that the User code has bee assiged to the correct area(s) (see page 123 for details) If a Local User code is beig used (see page 126 for details) esure that the kepad beig used is assiged to the correct area (see page 79 for details) Oe or more zoes show a alarm Check that the zoe is wired correctl (see page 32 for wirig details) Commuicator The Commuicator will ot dial B default the commuicator is disabled, check that the commuicator is eabled (see page 95 for details) Check that the telephoe lie has bee correctl wired to the commuicator (see page 37 for wirig details) Check that the telephoe umbers are programmed correctl (see page 91 for details) Check that the accout umbers are programmed correctl (see page 91 for details) Check that the dial attempts are ot programmed as zero (see page 91 for details) Check that the reportig areas have bee programmed correctl (see page 78 for details) Check that the reportig optios have bee programmed correctl (see page 78 for details) Commuicator dials but does ot commuicate Check that the telephoe umbers are programmed correctl (see page 94 for details) Check that the correct protocol is programmed (see page 94 for details) INS

50 Commissioig ad Troubleshootig Reset ad Service Messages Whe the sstem requires attetio because of a potetial problem, the displa will show oe of three service messages. These messages ca also be accessed at a time, allowig the user to view istaller iformatio. These messages would ormall be programmed with the telephoe umbers of the istaller or the Alarm Receivig Cetre (see page 76 for details). To displa the service messages, proceed as follows: The displa will ormall show the time ad date: e a Press N followed b 1 for the Service message: all la o o eice Press N followed b 2 for the Reset message: all Egiee o ese se Press N followed b 3 for the Ati-code message: all ese se Press R to exit from the message, the displa will the retur to ormal. Whe alarm iformatio is beig displaed, pressig the SCROLL ke will slow dow the displa ad also allow maual scrollig through the evets. Fault Warig Toes Whe a fault coditio occurs i.e. mais fail, lie fault etc. the iteral souders will chime ever 30 secods for 3 miutes. The chimig will automaticall stop whe a valid User code is etered, whe R is pressed or after 3 miutes (whichever occurs first). The fault idicatio will ol be cleared from the displa whe the fault has bee rectified i.e. power, telephoe lie has bee restored. Fault Messages E E e a oi eices e a o eed a se o eale access o eed a se o a sse There are sstem faults waitig to be viewed, eter a valid user code to view the faults. After eterig a code faults will be displaed for 30 secods. If the fault is ot reset withi 30 secods, this message will be displaed agai. The umber of devices coected to the etworks has chaged from the last time a Cofirm Devices was doe. Egieer access is programmed for Egieer code + User code (see page 71 for details). The Egieers code was etered whe the sstem was full armed (access to the programmig meu ca ol be gaied whe the sstem is ot full armed. o ah ailale e a o ae e a ae al e a ea ailed es e a ael id ape e a ell ape e a ilia ape e a ell se lo e a se lo e a K ape e a K os e a E ape e a E os e a E o ols e a E ell ap e a E ap e a eice eied e a o ode o alloed se eoe Kepad is o KE o ea eced e a ie ig Premier Elite Series Istallatio Maual There are o ATS (Alarm Trasmissio Sstem) paths available. The Stadb Batter has ot bee coected, There is a fault with the cotrol pael stadb batter or it is ot coected. Zoes that have bee placed o test have failed the test. There is a fault with the cotrol pael lid tamper. There is a fault with the bell tamper o the cotrol pael. There is a fault with the auxiliar tamper o the cotrol pael. The bell fuse o the cotrol pael has blow. The Auxiliar fuse o the cotrol pael has blow. There is a fault with the lid tamper of Kepad X,X. Kepad X,X has bee lost off of the sstem. There is a fault with the lid tamper of Expader X,X Expader X,X has bee lost off of the sstem. The voltage at expader X,X is ver low. The expader s Auxiliar iput (that is programmed as bell tamper) is i fault. The expader s Auxiliar iput (that is programmed as aux tamper) is i fault. The service timer has expired idicatig that the sstem requires a service (the sstem ca ormall still be used). The user code is locked out (ormall durig etr). The sstem must be disarmed usig a Prox TAG. To ma ivalid code attempts have caused the kepad to lock out. The kepad will remai like this for 5 miutes. The kepad has bee disabled to prevet uauthorised access. The displa will automaticall clear whe it is re-eabled. Areas are beig armed usig oe of the cotrol timers (eter a valid User code to defer the armig for 30 miutes). la Egiee oig ie ais oe e a ah al e a The alarm egieer has logged ito the programmig meu ad is workig o site (this message will clear whe the egieer logs off or the sstem is armed). There has bee a AC Mais failure. There is a fault with the ATS (Alarm Trasmissio Sstem). 50 INS176-15

51 Premier Elite Series Istallatio Maual Programmig the Cotrol Pael 5. Programmig the Cotrol Pael Itroductio All egieers should read this sectio carefull so as to familiarise themselves with the programmig of the cotrol pael. a Ja To access the Programmig meu, eter the factor default Egieer code If a mistake is made whilst eterig the Egieer code, simpl re-eter the correct code. WARNING Whe a Egieers code is etered to gai access to the Programmig meu, b default ALL zoes ad tampers are disabled E o elec: Zoe ep E o elec: ea ogaig E o elec: loal pios E o elec: Kepad ep A meu optio ca the be selected b pressig oe of the kes show or b usig the ke to search. Oce selected, press YES to access that optio. To leave the selected meu optio ad retur to the mai programmig meu, press R. To exit from the Mai Programmig meu but still remai Logged oto the sstem (zoes ad tampers still disabled), press R ad the displa will show Alarm Egieer Workig O Site. To log the Egieer off the sstem, press 0 followed b YES ad the sstem will revert to its ormal coditio. The table below shows the meu optios available: Ke Meu Optio Page P O N N 0 R Zoe Setup 54 Area Programmig 61 Global Optios 69 Kepad Setup 79 Expader Setup 81 Sstem Outputs 83 UDL/Digi Optios 90 Setup Users 123 Egieer Utils 128 Alter Part Arms 139 Ricochet Lear Meu 56 & 143 The Armig Meu - The User Meu - Log Off Egieer 53 Exit programmig mode P O N N N R R E o elec: Epade ep E o elec: se ps E o elec: U/igi pios E o elec: ep Uses E o elec: Egiee Uils E o elec: og o EIEE E o elec: a Zoes E o elec: icoche ea o o a o EI & o o a ig e? o o a Use e? E o elec: og o EIEE la Egiee oig ie INS

52 Programmig the Cotrol Pael Programmig Meu Guide Ke Mai Meu Ke Sub Meu Zoe Setup Lear/Delete Ricochet 1 R Zoe Tpes Zoe Attributes 1 Zoe Attributes 2 Zoe Areas Zoe Text Zoe Chime Remote Test Zoe Wirig Ricochet Device Mode 2 Area Programmig 0 Timers 1 Armig Modes 2 Area Arm Suites 3 Area Suite Text 4 Suite Arm Modes 5 Area Optios 6 Time Arm Areas 7 Area Text 3 Global Optios 0 Sstem Timers 1 Sstem Cofig. 2 Sstem Optios 3 Moitor Hardware 4 Cotrol Timers 5 Sstem Text 6 Part Arm Text 7 Holida Dates 8 Speaker Toes 9 PC Output Text Custom O/P Text 4 Kepad Setup Areas Zoe Mappig Optios Speaker Volume Souder Optios 5 Expader Setup Areas Locatio Text Auxiliar Iput Speaker Volume Souder Optios 6 Sstem Outputs 0 Pael Outputs 1 Digi Outputs 2 Com? Chaels 3 RedCARE Pis 4 Kepad Outputs 5 Expader Outputs 6 Custom Outputs 6 X-10 Outputs 7 UDL/Digi Optios* 0 Reset Digi 1 Start Test Call 2 MSN/Pre-Dial No 3 Program Digi Digi Optios/Eable 4* Texecom Coect 5 UDL Optios 6 Area Accouts 7 Setup Modules Setup Users O A Com Port Setup DualCom Iside Lear/Delete SmartKe Assig SmartKe Routig User Code User Areas User Tpe (ot alwas available) User Optios (ot alwas available) User Cofig. User Time Lock User Text (ot alwas available) Door Cotrol Add TAG *Eable Texecom Coect will ol appear if a ARC is programmed with the Coect Protocol. The meu umbers followig will icremet b oe step. So Digi Optios becomes 5 ad so o. Premier Elite Series Istallatio Maual Ke Mai Meu Ke Sub Meu 9 Egieer Utils 0 View Evet Log Do Bell Test 1 Do Walk Test 2 3 View Zoe Status 4 Sstem Tests 5 Cofirm Devices 6 View RKP Status 7 View Exp. Status 8 Set Sstem Time 9 Set Sstem Date Locatio Text Prit Log Data Soak Test Areas Chage Eg. Code Adjust Volumes Default NVM Data View id Data Cofigure Radio Ricochet Diag Sigallig Test View Uique ID P Part Arms O Part Arm 1 C Part Arm 2 P Part Arm 3 O Ricochet Lear Lear Devices R Delete Devices N Armig Meu 0 Exit Meu 1 Arm Sstem 2 Part Arm Sstem 3 Silet Armig 4 Omit Zoes 5 Cacel Exit 6 Disarm Areas 7 Use Ati-code 8 View Zoe Status 9 Omit 24Hr Zoes Set Chime Areas View Act. Faults View Act. Couts Sed SMS Text Defer Armig N User Meu 0 Exit Meu 1 View Evet Log 2 Chage Code 3 Edit Chime Zoes 4 Sstem Tests 5 Walk Test 6 Eable Egieer 7 Set Sstem Time 8 Set Sstem Date 9 Override Timers Alter Timers Setup Users Alter Part Arms Call Remote PC Alter Hol. Dates Adjust Volumes Prit Evet Log Edit Phoe No s View Uique Id Eable Texecom Coect Reset Recipe Data R Exit programmig meu (egieer still logged o) 0 Log Off Egieer 52 INS176-15

53 Premier Elite Series Istallatio Maual Programmig Text Text is programmed i a similar wa to mobile phoes. Characters are selected b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). The table below shows the kes to use ad the characters that are assiged to them: Ke Character 0 _ 0 1.,?! - & % / + = $ : ; 2 A B C 2 a b c 3 D E F 3 d e f 4 G H I 4 g h i 5 J K L 5 j k l 6 M N O 6 m o 7 P Q R S 7 p q r s 8 T U V 8 t u V 9 W X Y Z 9 w x z Move Cursor R Backspace (delete) C Cop Text P Paste Text O Predictive Text Upper/Lowercase, Predictive text ad Clear Scree The cotrol pael also features Predictive text. This ca be used to make isertig words easier, i.e. whe spellig the word PIR, istead of tpig , all that ou eed to do is tpe 747 ad the word is automaticall selected. This feature ca be tured o ad off as required b pressig the O ke ad ca also be automaticall selected ever time text mode is etered (see page 71 for details). Copig ad Pastig Whe programmig a items i.e. Zoes, Timers, Optios etc. pressig CHIME at a poit will Cop the iformatio that has just bee programmed ito memor. To program aother item usig the iformatio i memor, select the item ad press PART to Paste the iformatio. Copig ad Pastig ca ol be performed whilst i the same optio i.e. if a zoe has just bee programmed as Guard 1/Omit/Access/Areas-ABC, ALL of that iformatio ca be copied ito memor so that whe aother zoe is selected, the same iformatio ca the be quickl pasted to the other zoe. The iformatio held i memor after programmig a item ca ol be pasted ito a item of the same tpe ad caot be used oce aother optio is selected i.e. Zoe programmig iformatio caot be pasted ito Timers etc. Log Off Egieer Programmig the Cotrol Pael Wheever the Egieer Programmig meu is exited b pressig R twice, the displa will look like this: la Egiee oig o ie :373 e This message will remai o the displa util the Egieer logs out of the Programmig meu. To log out of Egieer Programmig meu, proceed as follows: Eter a Egieer code, the displa should look like this: E o elec: Zoe ep Press 0 or R, the displa should look like this: E o elec: og o EIEE Press to retur to ormal, the displa will look somethig like this: :373 e The Egieer is ow logged out of the Programmig meu. The Egieer will be automaticall logged out whe the Egieer Logoff Dela Timer Expires (See Page 70) Resettig the Egieers Code (User 00) If the Egieer code (User 00) has bee lost or forgotte, it ca ormall be reset back to the factor default of However, this ca ol be doe if the NVM has ot bee locked (see page 71 for details). To Reset the Egieer code (User 00): ENSURE THAT THE LID TAMPER IS CLOSED Hold dow the Factor Default butto for 6 secods (with the cotrol pael still powered), after 6 secods, the souders/kepads will bleep to idicate that the Egieer code has bee reset. NO other codes/programmig will be affected, it is just the User 00 Egieer code that will be reset. The Egieer (User 00) code ca ol be reset, if the NVM has ot bee locked (see page 71 for details). Other Thigs to Kow The N ke will alwas retur to the previous meu level. This is ofte the ol wa to exit a optio after programmig it. Pressig N several times will alwas retur to the top level meu ad the logout scree. The A,O,P,C ad R kes ofte provide shortcuts or exteded fuctios, refer to idividual programmig optios for details. INS

54 Zoe Setup Premier Elite Series Istallatio Maual 5.1 Zoe Setup E o elec: Zoe ep Zoe ael E/Ei Zoe 4 ael 4 E/Ei R 3 Zoe 4 ael 4 Zoe 4 ael 4 E/Ei < ad < Zoe 4 i R IE E/EI E/EI E Zoe 4 i R UE KK U E U E Zoe 4 eas: R Zoe 4 eas: < 2 Zoe 4 eas: < Zoe 4 R e: ^ 7 I^ Zoe 4 hie: ile R Zoe 4 es: eoe es Zoe 4 hie: hie ^ Zoe 4 es: eoe es Zoe eas Zoe eas EH< 54 INS A Zoe eas IJK A CP A

55 Premier Elite Series Istallatio Maual Zoe Setup Ricochet Eabled Devices V V2.09 Optio Switches I this mode ol optio switch 3 should be o. Itroductio Ricochet devices are leared through the Zoe Setup Meu, ad Premier Elite SmartKe are leared through the User Setup meu, the "Cofigure Radio" meu i Egieer's Utilities is ow redudat ad should ot be used o V2 sstems. Learig Devices To lear a device to a Zoe select the Zoe from the Zoe Setup Meu, Zoes that are capable of havig a Ricochet device leart to them will be displaed as follows:- Zoe o Used Fig 1 Fig 1idicates the pre-assiged zoe umber, the expader beig used ad the device slot o the expader. Oce a device has bee leart the displa will be as Fig 2:- Zoe ea: I Fig 2 If ou are usure if a zoe alread has a device leared to it, ou ca go to the meu as i Fig 1, press R ad the if a device is alread leart the displa will look like Fig 2, if ot the it will look like Fig 3 Zoe ea: ee Fig 3 Deletig Devices To delete devices from the expader is the same as learig them; choose the zoe ou wish to delete, ad follow the procedure to lear the device, whe the scree shows Learig press R. Learig Devices es o elec: Zoe ep Zoe ael o Used Zoe o Used R Zoe ea: eaig s R Zoe ea: I Zoe o Used Zoe i Zoe i Zoe Zoe ile e: hie: Zoe es: eoe es Zoe Hid Zoe ode: op: Zoe ea: I R Zoe ea: ee R Zoe eas: * Please refer to previous page for details o programmig these optios Commissioig Oce all devices are leart the should be istalled i their locatios startig closest to the expader ad workig to furthest awa. To start commissio mode the receiver should be i Tamper, or i the case of the -W paels place the jumper o Fit for Commissio positio. Wait for at least 15 miutes ad the test all devices. INS

56 Zoe Setup Premier Elite Series Istallatio Maual Ricochet Eabled Devices V2.10 & Later The Premier Elite Series of cotrol paels have bee upgraded with a ew lear/delete fuctio for devices. The ew Ricochet Lear/delete process is Easier & Smarter ad is i additio to the existig methods provided; devices ca be leared right from first power up of the cotrol pael, or accessed later o from a dedicated Ricochet Lear meu. The ew Meu ca also be accessed from a top level meu b pressig the ke. Learig Devices Lear Devices from first power up Follow the istructios give o page 48 or later for the first power sequece. Providig the sstem has a Ricochet eabled expader istalled, the followig will appear. The flow diagram shows the procedure to lear devices:- E o elec: ea icoche ea eice? Zoe????E?? Whe all device slots have bee used the followig scree will be show ll eices ea Pressig the N ke will retur ou to the Ricochet lear meu; oe p eice?e??? s ea eice o Zoe????E?? N N U pressig the R ke will eter the Delete devices meu. Commissioig Oce all devices are leart the should be istalled i their locatios startig closest to the expader ad workig to furthest awa. To start commissio mode the receiver should be i Tamper, or i the case of the -W paels place the jumper o Fit for Commissio positio. Wait for at least 15 miutes ad the test all devices. Access the Lear Meu usig the Omit Hot ke From a top level egieerig meu pressig the ke will take ou to the Ricochet lear meu above. IMPORTANT I all cases whe eterig the Lear meu the ext available free Zoe will be chose to lear a device too. It will ot be possible to lear a device to a Zoe that alread has a device leared too it. The umber of expader s o the sstem will dictate which ext free zoe is chose. Auto Zoe Tpe & Area Whe learig devices, if o editig has take place of the cotrol pael oboard hardwired zoes, these will be switched to Not Used after the first Ricochet device is leared to the sstem; the followig defaults will be used for Ricochet devices leared to the sstem. Zoe Tpe Area Not Used N/A 009 Etr/Exit 1 A 010 Guard Access A 011 & above Guard A IMPORTANT If a editig of a of the o board cotrol pael zoes is carried out BEFORE a Ricochet devices are leared too the sstem, the cotrol pael zoes will remai at factor defaults. Deletig Devices Delete Devices To delete devices from the sstem, access the Ricochet Lear meu. A of the methods previousl detailed ma be used. The R ke is used to access the Delete optio. Follow the flow diagram below to delete devices from the sstem. E o elec: ea icoche ea eice Zoe????E? R R elee eice? Zoe????E? N N R R U If all devices are deleted from the sstem the followig will be show ll eices eleed Pressig the N ke will retur ou to the Ricochet lear meu; pressig the R ke will eter the Lear devices meu 56 INS176-15

57 Premier Elite Series Istallatio Maual Zoe Tpes Each zoe must be programmed before it is recogised b the sstem. Zoe umbers are etered as a three digit umber i.e. Zoe 1 would be etered as 001. Each zoe cosists of a zoe tpe, attributes, areas ad zoe text. Whe programmig zoes, first select a zoe tpe the select a required attributes, assig the zoe to a area ad the program a required zoe text. Zoe Tpe + Zoe Attributes + Zoe Areas + Zoe Text = Zoe Programmed. The followig zoe tpes are available: 0 - Not used A zoe that is ot moitored b the sstem, uused zoes should be programmed as Not Used or liked out. 1 - Etr/Exit 1 Normall used for the mai etr/exit door i.e. Frot Door. The zoe ca be activated durig the exit mode without causig a Fault. Oce the sstem/area is armed, activatio of the zoe will start the Etr 1 Dela timer for the selected area. 2 - Etr/Exit 2 Normall used for aother etr/exit door that requires a differet etr dela i.e. Back Door, Garage Door etc. The zoe ca be activated durig the exit mode without causig a Fault. Oce the sstem/area is armed, activatio of the zoe will start the Etr 2 Dela timer for the selected area. If a Etr/Exit zoe remais active at the ed of the etr time, it will automaticall be omitted util the sstem has bee uset ad re-set. If a Etr/Exit zoe tpe is locked out, Guard Access zoes i the same area as the omitted Etr/Exit zoe will automaticall become Etr/Exit 1 zoes to allow access ito the premises without causig a alarm. If a Etr/Exit 1 or 2 zoe tpe is assiged the Etr/Exit 2 attribute (see page 58), whe a zoe with the Guard attribute activates ad causes a alarm (whe the area is full armed), the zoe will become a Guard zoe for the duratio of the Abort timer. 3 - Guard Normall used for detectio devices such as PIR s, Door Cotacts etc. This zoe tpe will cause a Itruder alarm if it is activated whe the sstem/area is armed. This zoe tpe will also activate a output programmed as Guard Alarm. 4 - Guard Access Normall used for detectio devices alog the etr/exit route. This zoe tpe will allow the user to walk past the detector without causig a Fault durig the exit mode or a Itruder alarm durig the etr mode, however, the zoe will cause a immediate Itruder alarm if activated at a other time. This zoe tpe will also start the etr mode whe the sstem/area is part armed ad activate a output programmed as Guard Access Alarm. 5-24Hr Audible This zoe tpe will cause a iteral alarm if it is activated whe the sstem/area is disarmed ad will cause a Itruder alarm whe the sstem/area is armed. The pael will also report a 24-Hour alarm to the Alarm Receivig Cetre whe usig Cotact ID reportig. 6-24Hr Silet This zoe tpe will cause a silet alarm if it is activated whe the sstem/area is disarmed ad will cause a Itruder alarm whe the sstem/area is armed. The pael will also report a 24-Hour Alarm to the Alarm Receivig Cetre whe usig Cotact ID reportig. 7 - PA Audible Normall used for moitorig Paic or hold-up alarms. This zoe tpe will cause a Paic alarm if it is activated whe the sstem/area is armed or disarmed. 8 - PA Silet Normall used for moitorig Paic or hold-up alarms. This zoe tpe will cause a silet Paic alarm if it is activated whe the sstem/area is armed or disarmed. Zoe Setup 9 - Fire Normall used for moitorig smoke detectors. This zoe tpe will cause a Fire alarm with distictive fire toe if it is activated whe the sstem/area is armed or disarmed. I additio, the bell output will pulse Medical This zoe tpe will cause a Silet alarm if it is activated whe the sstem/area is armed or disarmed. The pael will also report a Medical alarm to the Alarm Receivig Cetre whe usig Cotact ID reportig Hr Gas This zoe tpe will cause a Silet alarm if it is activated whe the sstem/area is armed or disarmed. The pael will also report a 24- Hour Gas alarm to the Alarm Receivig Cetre whe usig Cotact ID reportig Auxiliar This zoe tpe will cause a Silet alarm if it is activated whe the sstem/area is armed or disarmed. The pael will also report a Auxiliar alarm to the Alarm Receivig Cetre whe usig Cotact ID reportig Tamper This zoe tpe will cause a Iteral alarm if it is activated whe the sstem/area is disarmed ad will cause a Itruder alarm whe the sstem/area is armed Exit Termiator This zoe tpe is used to fialise the armig procedure whe armig the sstem/area (see page 62 for details) Momet Ke This zoe tpe ca be used to arm ad disarm oe or more areas. Whe the zoe is activated ad the secured the areas assiged to the zoe will arm. Whe the zoe is subsequetl activated ad the secured the sstem will disarm the areas assiged to the zoe. Tamper faults will ot arm or disarm athig, but will cause a Tamper alarm Latch Ke This zoe tpe ca be used to arm ad disarm oe or more areas. Whe the zoe is activated, the areas assiged to the zoe will arm. Whe the zoe is secured, areas assiged to the zoe will disarm. Tamper faults will ot arm or disarm athig, but will cause a Tamper alarm Securit This zoe tpe ca be used to Lockout kepads. Whe the zoe is activated, kepads assiged to the same area will ot accept a ke presses. Whe the zoe is secured, all kepads respod as ormal Omit Ke This zoe tpe will isolate a zoe assiged to the same area as log as it has the Omit attribute Custom This zoe tpe ca be programmed to operate as required usig its ow set of attributes (see page 59 for details) Cof PA audible This zoe tpe is for use with multi actio PA buttos, or where a cofirmed PA is required, ad will activate local souders Cof PA silet This zoe tpe is for use with multi actio PA buttos, or where a cofirmed PA is required, ad will ot activate local souders. INS

58 Zoe Setup Zoe Attributes 1 Attributes ca be assiged to a zoe to alter its operatio i.e. a Guard zoe with the Access attribute will allow the user to walk past the detector without causig a Fault durig the exit mode or a Itruder alarm durig the etr mode. Select attributes b pressig kes 1 to 8 (a letter o the displa meas the attribute is selected, a Dot o the displa meas the attribute is ot selected). The followig attributes are available: O - OMITTABLE Zoes with this attribute ca be mauall omitted. Zoes without this attribute caot be mauall omitted. F - FORCE OMIT Zoes with this attribute will be omitted if the are ot secure at the ed of the exit mode. Zoes without this attribute will cause a Arm Fail if the are ot secure at the ed of the exit mode. 1 - PART 1 OMIT Zoes with this attribute will be omitted whe Part Arm 1 is selected. Zoes without this attribute will respod as ormal. 2 - PART 2 OMIT Zoes with this attribute will be omitted whe Part Arm 2 is selected. Zoes without this attribute will respod as ormal. 3 - PART 3 OMIT Zoes with this attribute will be omitted whe Part Arm 3 is selected. Zoes without this attribute will respod as ormal. A - ACCESS Zoes with this attribute will ot cause a Fault durig the exit mode or a Itruder alarm durig the etr mode. However, if the zoe is activated at a other time a Itruder alarm will occur. Zoes without this attribute will respod as ormal. E - ENTRY/EXIT 2 Zoes with this attribute will start the Etr Dela 2 timer for the selected area whe the area is part armed. Etr/Exit 1 or 2 zoes with this attribute will become a Guard zoe for the duratio of the Abort timer if a zoe with the Guard attribute activates ad cause a alarm (whe the area is full armed). Zoes without this attribute will respod as ormal. G - GUARD Zoes with this attribute will cause a Itruder alarm whe the area is part armed (this would ormall be used o Etr/Exit 1 or 2 zoe tpes). Whe the area is full armed, activatio of a zoe with this attribute will cause a Etr/Exit 1 or 2 zoe with the Etr/Exit 2 attribute to become a Guard zoe for the duratio of the Forced Etr timer. Zoes without this attribute will respod as ormal. Zoe Attributes 2 Premier Elite Series Istallatio Maual Select attributes b pressig kes 1 to 8 (a letter o the displa meas the attribute is selected, a Dot o the displa meas the attribute is ot selected). The followig attributes are available: D - DOUBLE KNOCK Zoes with this attribute will ol cause a alarm if it is activated twice withi the Double Kock time widow or for the duratio of the time widow. Zoes without this attribute will respod as ormal. B - BEAM PAIR Zoes with this attribute will ol cause a alarm if two zoes (assiged to the same area) with this attribute are activated withi the Beam Pair time widow. Zoes without this attribute will respod as ormal. T - ON TEST Zoes with this attribute will be put o soak test for the duratio of the soak test timer (see page 69), whe the area soak test optio is selected (see page 136) Zoes without this attribute will respod as ormal. A - ACTIVITY Zoes with this attribute will cause a activit fault to be displaed at the time of armig if the have ot bee activated durig the Activit Dela period. If Cofig. optio 14 (see page 71 for details) has bee set to Activit Fault Bar the sstem/area caot be armed util the zoe has bee activated (forced walk test). Zoes without this attribute will respod as ormal. R - RESET Zoes with this attribute will ot be moitored durig the Detector Reset period i.e. whe the exit mode is started ad power is removed from certai detectors (to reset them) the Fault o the zoe is igored. Zoes without this attribute will be moitored as ormal. A - AUTO RE-ARM Zoes with this attribute will ol re-arm at the ed of the bell duratio providig that the Re-arm limit has ot bee reached (see page 74 for details). Oce this limit has bee reached, the zoe will lock out ad ot cause a further Itruder alarms. Zoes without this attribute will alwas re-arm at the ed of the bell duratio. Q - QUICK RESPONSE. The respose time of the zoes with this attribute is govered b the Zoe Loop respose Timer (see page 69 for details). The respose time of a zoe without this attribute is fixed at 250mS. E ENGINEER ALARM Zoes with this attribute will cause a Itruder alarm whe activated if the egieer arms the sstem/area. Zoes without this attribute will ot cause a Itruder alarm whe activated if the egieer arms the sstem/area. 58 INS176-15

59 Premier Elite Series Istallatio Maual Attributes for Momet or Latch Kes Select attributes b pressig kes 1 to 8 (a letter o the displa meas the attribute is selected, a Dot o the displa meas the attribute is ot selected). The followig attributes are ol available for Momet Ke or Latch Ke zoe tpes. I - INSTANT ARM Whe usig a ke switch, the area will arm istatl. P - PART ARMING Whe usig a ke switch, the area will Part arm. F FULL ARM DISABLE Whe usig a ke switch to Full arm a area, the ke switch is disabled oce the area is armed. D - DISARM ONLY The ke switch caot be used for Armig (it ca ol be used for Disarmig ). F - SILENTARMING Whe armig usig a ke switch, the selected areas will arm siletl. T - TIME ARM DISABLE Activatio of the ke switch will override the Time Armig feature o the cotrol pael ad prevet it from operatig util the zoe is reistated. K - KEYTUBE Whe this attribute is ON, a activatio / deactivatio from this zoe will be logged ad reported to ARC. There will be o kepad displa or alarm. "Max log Messages 3" optio limit which is foud i sstem cofiguratio optios is ot obeed for these evets M - MONITOR ONLY WHEN ARMED Whe this attribute is ON, AND the zoe is armed (All its areas), the a activatio / deactivatio from this zoe will be logged ad reported to ARC. There will be o kepad displa or alarm. This is similar to the curret Moitor ol attribute, but the ew attribute works ol i armed mode. Also the "Max log Messages 3" optio limit which is foud i sstem cofiguratio optios is ot obeed for these evets Attributes for Custom Zoes Select attributes b pressig kes 1 to 8 (a letter o the displa meas the attribute is selected, a Dot o the displa meas the attribute is ot selected). The followig attributes are ol available for Custom zoe tpes. I - INTERNAL Activatio of this zoe (whe armed) will cause the iteral souders to activate. B - BELL/STROBE Activatio of this zoe (whe armed) will cause the exteral souder/strobe to activate. M - MONITOR 24Hr The zoe is armed at all times. C - ENABLE COMS Activatio of this zoe (whe armed) will cause the area Alarm output to activate. A Custom zoe with this attribute will activate both the iteral ad exteral souders eve if the are ot eabled above. W - WARNING REQ. If the zoe remais Active for the duratio of the Warig Dela timer (see page 70), a warig toe will occur ever 30 secods for 3 miutes (or util a code is etered or R is pressed). Zoe Setup If MONITOR 24Hr is eabled, a iteral alarm will occur after the Warig Dela. Custom Zoes Seismic Attributes* Seismic Zoe* Seismic Referece Attribute* Seismic Twi Attribute* Seismic Debug Attribute* *Reserved for future use Zoe Areas 12/24/48/64/88/168 The 12 &24 ca be divided ito two separate areas of protectio, the 48/64 ca be divided ito four separate areas of protectio, the 88 ca be divided ito eight separate areas of protectio, ad the 168 ca be divided ito sixtee separate areas of protectio. This allows differet parts of a buildig to be armed ad disarmed idepedetl from each other. B default all zoes are assiged to area A, but if required, a zoe ca be assiged to a umber of areas. If a zoe is assiged to more tha oe area, it will ol be recogised b the sstem whe all areas it is assiged to, are armed. Zoe Areas 640 The 640 ca be divided ito sixt four separate areas of protectio. This allows differet parts of a buildig to be armed ad disarmed idepedetl from each other. B default all zoes are assiged to area A, but if required, a zoe ca be assiged to a umber of areas. If a zoe is assiged to more tha oe area, it will ol be recogised b the sstem whe all areas it is assiged to, are armed. Programmig of Zoe Areas for the 640 has additioal requiremets. Areas o the 640 are divided ito 4 sets of 16 areas idetified b the table below. 0B0B0BArea Groups 1B1B1BArea's 1 A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P, 2 A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P, 3 A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P, 4 A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P, Zoe eas Zoe eas EH< A Zoe eas IJK Zoe Text A CP Each zoe ca have up to 32 characters of descriptive text assiged to it. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). For a more iformatio, see page 53. The cotrol pael also features Predictive text. This ca be used to make isertig words easier, i.e. whe spellig the word PIR, istead A INS

60 Zoe Setup of tpig , all that ou eed to do is tpe 747 ad the word is automaticall selected. This feature ca be tured off if required b pressig the O ke ad ca also be automaticall selected ever time text mode is etered. Zoe Chime Each zoe ca be programmed to chime the iteral souders usig oe of the available chime toes whe activated. Remote Test Eable A zoe with this attribute will be tested whe the remote test fuctio is iitiated from Witex. A detector o a zoe with the remote test attribute will be expected to go ito alarm durig the remote test, if it does ot go ito alarm, the detector will be reported as fault. This facilit is ol to be used i cojuctio with sstem output tpe 47 Detector Test see page 85. Zoe Wirig Zoe wirig coectios are show o page 32 the followig programmig optios are available. 0 - Normall Closed For use o ormall closed devices without tamper protectio. Normall used for keswitches. See Normall Closed wirig diagram o page Normall Ope For use o ormall closed devices without tamper protectio. Normall used for keswitches. See Normall Ope wirig diagram o page Double Pole/EOL Default zoe wirig cofiguratio. 3 - Triple EOL Stadard Texecom TEOL, use this wirig tpe for all Texecom ati maskig detectors. 4-1K/1K/(3K) Alterative TEOL cofiguratio with 1K alarm resistor, 3K fault resistor ad 1K EOL resistor 5-4K7/6k8/(12K) Alterative TEOL cofiguratio with 6K8 alarm resistor, 12K fault resistor ad 4K7 EOL resistor. 6-2K2/4K7/(6k8) Alterative TEOL cofiguratio with 4K7 alarm resistor, 6K8 fault resistor ad 2K2 EOL resistor 7-4K7/4k7 Alterative EOL cofiguratio with 4K7 alarm resistor ad 4K7 EOL resistor. 8 - WD Moitor Specialised wirig cofiguratio for moitorig warig devices with fault reportig capabilit. Ol use this wirig tpe o zoes tpes programmed as Auxiliar. Normall wired as a Normall Closed circuit. Ricochet Device Mode Ricochet Device Mode determies how wireless devices will operate o the sstem. This optio ol appears i the meu after a device has bee leared to the zoe, ad replaces the wirig tpe optios. Alwas Awake o This mode should ol be used o devices which are required to sigal at all times ad is the default settig for Cotacts & Shock sesors. Hbrid Auto o o Premier Elite Series Istallatio Maual Hbrid mode is used to cotrol the reportig fuctios for devices. Whe i the mode devices are asleep whe the sstem is set, ad are woke up b the cotrol pael at the poit of armig. Whe the sstem is disarmed the devices will be put back to sleep. This mode of operatio is the default mode for Dual Techolog devices. Whe i Auto Mode, devices poll at 15 miute itervals. Followig activatio, devices will ot trasmit the same activatio agai for a period of 3 miutes. This mode of operatio is the default mode for sigle techolog volumetric detectio devices Exp O/P Exp O/P 1-2 Exp O/P 1 Exp O/P 3-4 Exp O/P 2 Exp O/P 5-6 Exp O/P 3 Exp O/P 7-8 Exp O/P 4 Exp O/P 1-3 Exp O/P 5 Exp O/P 4-6 Exp O/P 6 Exp O/P 7 Exp O/P 8 From V4 these outputs will be used b Home automatio ad other Coect eabled Ricochet Devices. Device Specific o This device mode is used for devices with particular operatig requiremets. Home Automatio, Warig devices ad safet devices would use a Device Specific mode, which should ot be altered. Zoe Groups Zoe groups allow multiple zoes to be assiged to a Zoe Group Output. Oce assiged triggerig a of the zoes assiged to the group will trigger the output. The default optio for each Zoe is 0 ad meas the Zoe is ot assiged to a group. Please see page 89 for the programmig optios for the Zoe Group Output Tpe. Pael DD 243 Output Groups 12/ / To compl with DD 243, durig the ormal etr dela, the cotrol pael must prevet a Cofirmed Itruder Alarm from beig reported to the Alarm Receivig Cetre. WARNING Owig to the abilit to disable ALL of the cofirmatio facilities, the customer should be advised i writig b the alarm compa that ALL meas of alarm cofirmatio are disabled whe the iitial etr door is opeed. The alarm compa should the obtai writte acceptace from the customer of the disablig of the meas of alarm cofirmatio. 60 INS176-15

61 Premier Elite Series Istallatio Maual 5.2 Area Programmig Timers E o elec: ea ogaig ea ogaig ies Ei ela 3 ecod(s) Ei ela 3 ecod(s) R E ela ecod(s) E ela ecod(s) Ei ela 3 ecod(s) These groups of Area timers cotrol timig ad dela fuctios for areas A - B (24) A - D (48), A - H (88) ad A - P (168) & groups 1-4 Area A-P (640) Each timer ca be programmed for a value betwee 000 ad 999. Area Programmig The area bell timers i optios 5, 6 ad 8 below are ol active whe sstem cofig optio 5 is switched to Area Bell Time. Timers listed are for Areas A to B (A to D) (A to H) (A to P) (1,2,3,4, A-P) depedig o the pael beig used. 1 - Exit Dela Whe the area exit mode is programmed as Timed this timer cotrols the dela betwee the user iitiatig the exit mode for the selected area ad the area actuall. 2 - Etr 1 Dela If the area is armed ad a Etr/Exit 1 zoe is activated, this timer will start ad the etr toe will be heard. If the area is ot disarmed before this timer expires, the 2 d Etr Dela timer will start. 3 - Etr 2 Dela If the area is armed ad a Etr/Exit 2 zoe is activated, this timer will start ad the etr toe will be heard. If the area is ot disarmed before this timer expires, the 2 d Etr Dela timer will start. 4-2 d Etr Dl Whe the area Etr Dela 1 or 2 timer expires, this timer will start ad a Iteral alarm will occur. If the area is still ot disarmed before this timer expires, a Itruder alarm will the occur. 5 - Bell Dela This timer cotrols the dela betwee a Itruder alarm occurrig i the selected area ad the Bell/Strobe output activatig. 6 - Bell Duratio This timer cotrols the duratio of the Bell output after a Itruder alarm has occurred i the selected area ad a programmed Bell Dela has expired. 7 - Coms Dela. This timer cotrols the dela betwee a Itruder alarm occurrig i the selected area ad the commuicator reportig to the Alarm Receivig Cetre. 8 - Part Bell Dl. for Areas A to D (A to H) (A to P) Whe the selected area is Part Armed this timer cotrols the dela betwee a Itruder alarm occurrig i the selected area ad the Bell/Strobe output activatig, the iteral souders will also soud durig this time as a warig. 9 Cofirm PA Timer, for Areas A to B (A to D) (A to H) (A to P) (1A to 4P) Whe a Paic Alarm is raised i a area a cofirm PA timer is started for that specific area. If a secod PA alarm (icludig tamper from a other device i the same area) is raised while the PA timer is active a Cofirmed PA Alarm is raised. INS

62 Area Programmig Armig Modes Premier Elite Series Istallatio Maual Area Arm Suites 24/48/64/88/168 E o elec: ea ogaig ea ogaig ies 1 ea ogaig ig odes ea : ied ei ea : ied ei 1 ea : E/Ei The wa that a area arms ca be cofigured for a of the followig optios: 1 - Etr/Exit The area will arm after the Etr/Exit door has bee closed ad the Exit Settle timer has expired. 2 - Exit Term. The area will arm after the Etr/Exit door has bee closed, the Exit Termiator butto has bee pressed ad the Exit Settle timer has expired. 3 - Timed Exit The area will arm after the programmed Exit Time has expired. If a Exit Termiator zoe is activated at a poit durig the exit mode, a remaiig exit time is cacelled ad the area will arm immediatel. 4 - Istat The area will arm istatl. 5 - Deferred The area will arm after the programmed Exit Time has expired. However, if a zoes ot o the exit route are activated durig the exit mode, the Exit Time is restarted. E o elec: ea ogaig ea ogaig ies 2 ea ogaig ea ies ea ie 4 ea ie 4 ea ie 4 < 3 ea ie 4 < The 24 has 2 Area Arm Suites the 48/64 has 4 Area Arm Suites the 88 has 8 Area Arm Suites the 168 has 16 Area Arm Suites. A umber of areas ca be assiged to each suite. Areas assiged to a Area Arm Suite will be armed whe the suite is selected, makig it easier for the user to select multiple areas if required. Example Area Arm Suites could be useful i a domestic situatio where the user wats to arm areas A ad B at ight but does ot wat to select each area idividuall. Areas A ad B would be assiged to Area Arm Suite 1 Whe the user wats to arm the sstem at ight, Area Arm Suite 1 would be selected Areas A ad B are automaticall selected for armig Descriptive text ma also be assiged to the Area Arm Suite (see page 63 for details). Area Arm Suite Cotroller The suites ca be assiged to kepads so that differet combiatios of areas ca be armed or disarmed depedig o which kepad is used (see page 80 for details) ad operates as follows: Kepad 1 = Area Arm Suite 1, Kepad 2 = Area Arm Suite 2, Kepad 3 = Area Arm Suite 3 etc. Whe a User code is etered at a kepad, oe of the Area Arm Suites is selected (depedig o which kepad was used) ad the areas cotaied withi that suite arm usig the armig mode for that suite, the kepad souder will also follow the areas defied b the suite. 62 INS176-15

63 Premier Elite Series Istallatio Maual Area Programmig Area Arm Suites 640 Area Suite Text E o elec: ea ogaig ea ogaig ies 2 ea ogaig ea ies ie ea A ie ea4 ie ea4 EH< ie ea4 E E o elec: ea ogaig ea ogaig ies 3 ea ogaig ea ie e UIE ea ie 4 UIE 4 ea ie 4 UIE ^Edi e edie eig Edi e ^ The 640 has 4 groups of 16 Arm suites. A umber of areas ca be assiged to each suite. Areas assiged to a Area Arm Suite will be armed whe the suite is selected, makig it easier for the user to select multiple areas if required. Example Area Arm Suites could be useful i a domestic situatio where the user wats to arm areas A ad B at ight but does ot wat to select each area idividuall. Areas A ad B would be assiged to Area Arm Suite 1 Whe the user wats to arm the sstem at ight, Area Arm Suite 1 would be selected Areas A ad B are automaticall selected for armig Descriptive text ma also be assiged to the Area Arm Suite (see page 63 for details). Area Arm Suite Cotroller The suites ca be assiged to kepads so that differet combiatios of areas ca be armed or disarmed depedig o which kepad is used (see page 80 for details) ad operates as follows: Kepad 1 = Area Arm Suite 1, Kepad 2 = Area Arm Suite 2, Kepad 3 = Area Arm Suite 3 etc. Whe a User code is etered at a kepad, oe of the Area Arm Suites is selected (depedig o which kepad was used) ad the areas cotaied withi that suite arm usig the armig mode for that suite, the kepad souder will also follow the areas defied b the suite. Text ma be assiged to the Area Arm Suites to allow the user to select the suites b descriptio istead of umber. Up to 16 characters of text ca be programmed for each suite. Example Text descriptios for the Area Arm Suites could be useful where more tha oe suite has bee defied. The user wishes to arm areas A ad B at ight but is ot too sure which suite to select. Areas A ad B would be assiged to Area Arm Suite 1 (see page 62 for details) Whe the user wats to arm the sstem at ight, Area Arm Suite 1 would be selected Text will be displaed to cofirm that the selected suite is correct i.e. Bedtime Settig Areas A ad B are automaticall selected for armed Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). INS

64 Area Programmig Suite Arm Modes Premier Elite Series Istallatio Maual Area Optios 24/48/64/88/168 E o elec: ea ogaig ea ogaig ies 4 ea ogaig ie odes ie : ied ei ie : ied ei 1 ie : E/Ei The wa that a Area Arm Suite arms whe selected, ca be cofigured for a of the followig optios: 1 - Etr/Exit The suite will arm after the Etr/Exit door has bee closed ad the Exit Settle timer has expired. 2 - Exit Term. The suite will arm after the Etr/Exit door has bee closed, the Exit Termiator butto has bee pressed ad the Exit Settle timer has expired. 3 - Timed Exit (Default for All Areas) The suite will arm after the programmed Exit Time has expired. If a Exit Termiator zoe is activated at a poit durig the exit mode, a remaiig exit time is cacelled ad the area will arm immediatel. 4 - Istat The suite will arm istatl. 5 - Deferred The suite will arm after the programmed Exit Time has expired. However, if a zoes ot o the exit route are activated durig the exit mode, the Exit Time is restarted. E o elec: ea ogaig ea ogaig ies 5 ea ogaig ea pios o a eoe eoe < 4 eoe < Area Optios 640 E o elec: ea ogaig ea ogaig ies 5 ea ogaig ea pios o a o a o a < 4 o a 64 INS176-15

65 Premier Elite Series Istallatio Maual Area Programmig These optios cotrol how various features affect each area. A umber of areas ca be assiged to each optio Auto Part Arm Areas assiged to Auto Part Arm will full arm if a Etr/Exit zoe is activated durig the exit mode ad will Part Arm 1 if a Etr/Exit zoe is ot activated durig the exit mode. Areas ot assiged to Auto Part will alwas full arm. 1 - Part Arm Istat Areas assiged to Part Arm Istat will arm istatl whe part armig. Areas ot assiged to Part Arm Istat will use the area exit timer whe part armig. 2 - Part Arm Silet Areas assiged to Part Arm Silet will ever geerate Exit toes whe part armig. Areas ot assiged to Part Arm Silet will alwas geerate Exit toes whe part armig. 3 - Remote Arm Areas assiged to Remote Arm ca be armed remotel usig the Witex UDL software ad a PC. Areas ot assiged caot be armed remotel. 4 - Remote Disarm Areas assiged to Remote Disarm ca be disarmed remotel usig the Witex UDL software ad a PC. Areas ot assiged to Remote Armig caot be disarmed remotel. 5 - Pael Tamper Areas assiged to Pael Tamper will cause a Tamper alarm whe the cotrol pael cover is removed. Areas ot assiged to Pael Tamper will ever cause a Tamper alarm whe the cotrol pael cover is removed. 6 - Bell Tamper Areas assiged to Bell Tamper will cause a Tamper alarm whe the Bell tamper loop is broke. Areas ot assiged to Bell Tamper will ever cause a Tamper alarm whe the bell tamper loop is broke. 7 - Auxiliar Tamper Areas assiged to Auxiliar Tamper will cause a Tamper alarm whe the Auxiliar tamper loop is broke. Areas ot assiged to Auxiliar Tamper will ever cause a Tamper alarm whe the auxiliar tamper loop is broke. 8 - Pael Speaker Areas assiged to Pael Speaker will cause the cotrol pael speaker to activate whe those areas are i alarm, etr ad exit etc. Areas ot assiged to Pael Speaker will ever cause the cotrol pael speaker to activate whe those areas are i alarm, etr ad exit etc. 9 - Bell & Strobe op Areas assiged to Bell & Strobe op will cause the Bell/Strobe output o the cotrol pael to activate whe a alarm occurs i those areas. Areas ot assiged to Bell & Strobe op will ever cause the Bell/Strobe output o the cotrol pael to activate whe a alarm occurs i those areas Alarms Eg Reset Each area ca be programmed for Egieer or User reset followig a Itruder alarm. Areas Assiged to Alarms Eg Reset will respod as follows: The assiged areas ca ol be reset usig a Egieer code If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to Alarms Eg Reset ca be reset with a User code that is valid for those areas Cofirmed Reset Each area ca be programmed for Egieer or User reset followig a Cofirmed alarm. Areas Assiged to Cofirmed Reset will respod as follows: If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to Cofirmed Reset ca ol be reset with a User code that is valid for those areas providig that Alarms Eg Reset (optio 13) is also programmed for user reset Tamper Eg Reset Each area ca be programmed for Egieer or User reset followig a Tamper alarm (whe the area is uarmed). Areas assiged to Tamper Eg Reset will respod as follows: The assiged areas ca ol be reset usig a Egieer code If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to Tamper Eg Reset ca be reset with a User code that is valid for those areas Ati-code Reset Each area ca be programmed for Ati-code Reset followig a Itruder or Tamper alarm. Areas assiged to Ati-code Reset will respod as follows: The assiged areas ca be reset usig the Ati-code as well as a Egieer code Areas ot assiged to Ati-code Reset ca ol be reset usig a Egieer code or User code. The assiged areas ca ol be reset usig a Egieer code INS Areas ca ol be assiged to Ati-code Reset if the are also assiged to Alarms Eg Reset ATS Path Faults Areas assiged to ATS Path Faults (ATS = Alarm Trasmissio Sstem) will respod as follows whe a ATS fault occurs. All kepads will displa ATS Path Fault All kepads ad speakers assiged to the same area as the ATS Path Fault will geerate a Service toe ever 30 Secods util the fault is ackowledged b the User eterig a valid code for that area A assiged area ca be armed, as log as Arm With No ATS is also assiged to that area (see optio 16). However, a warig will be give to idicate the problem Areas ot assiged to ATS Path Faults will ever be affected b a ATS fault Arm With No ATS Areas assiged to Arm With No ATS (ATS = Alarm Trasmissio Sstem) ca be armed whe a ATS fault occurs i those areas (see optio 15). Areas ot assiged to Arm With No ATS ca ever be armed whe a ATS fault occurs i those areas (see optio 15) AC Mais Fail Areas assiged to AC Mais Fail will respod as follows whe a AC mais failure occurs. All kepads will displa AC Mais Fail All kepads ad speakers assiged to the same area as the AC Mais Fail will geerate a Service toe ever miute util the fault is ackowledged b the User eterig a valid code for that area A assiged area ca be armed, as log as Arm With AC Fail is also assiged to that area (see optio 18). However, a warig will be give to idicate the problem Areas ot assiged to AC Mais Fail will ever be affected b a AC mais failure Arm with AC Fail Areas assiged to Arm With AC Fail ca be armed whe a AC Mais fail occurs i those areas (see optio 17). Areas ot assiged to Arm With AC Fail ca ever be armed whe a AC Mais fail occurs i those areas (see optio 17) Full Arm Coms Areas assiged to Full Arm Coms will respod as follows:

66 Area Programmig Premier Elite Series Istallatio Maual If the selected area is full armed ad a Itruder alarm occurs i that area, Itruder alarm evets (for that area) are reported to the Alarm Receivig Cetre after a programmed Digi dela has expired Areas ot assiged to Full Arm Coms will ever report Itruder alarm evets to the Alarm Receivig Cetre whe the are full armed Part Arm Coms Areas assiged to Part Arm Coms will respod as follows: If a assiged area is part armed ad a Itruder alarm occurs i that area, Itruder alarm evets (for that area) are reported to the Alarm Receivig Cetre after a programmed Digi dela has expired Areas ot assiged to Part Arm Coms will ever report Itruder alarm evets to the Alarm Receivig Cetre whe the area is Part armed Uarm Fire Coms Areas assiged to Uarm Fire Coms will respod as follows: If a assiged area is uarmed ad a Fire alarm occurs i that area, Fire alarm evets (for that area) will be reported to the Alarm Receivig Cetre Areas ot assiged to Uarm Fire Coms will ever report Fire alarm evets to the Alarm Receivig Cetre whe the area is uarmed. Fire alarm evets are alwas reported to the Alarm Receivig Cetre whe the area is armed regardless of whether the area is assiged to this optio or ot Uarm Tamp. Coms Areas assiged to Uarm Tamp. Coms will respod as follows: If a assiged area is uarmed ad a 24Hr or Tamper alarm or reportable fault occurs i that area, the evet will be reported to the Alarm Receivig Cetre Areas ot assiged to Uarm Tamp. Coms will ever report 24Hr or Tamper alarm evets or faults to the Alarm Receivig Cetre whe the area is uarmed. 24Hr ad Tamper alarm evets are alwas reported to the Alarm Receivig Cetre whe the area is armed regardless of whether the area is assiged to this optio or ot Auto Arm Areas Areas assiged to Auto Arm Areas will respod as follows: Whe a assiged area is disarmed, the Auto Arm Dela timer will start (see page 69 for details) Ever time a detector i that area is activated, the timer is restarted If the timer is allowed to expire i.e. o detectors i the assiged area are activated, the area will arm itself Areas ot assiged to Auto Arm Areas will ever tr to arm themselves Area A Foer Area A ca be used as a commo area (automaticall arms last ad disarms first). Areas assiged to Area A Foer will cause the pael to respod as follows: Whe all assiged areas are armed, Area A will automaticall arm itself Whe a oe assiged area is disarmed, Area A will automaticall disarm itself Areas ot assiged to Area A Foer will ot affect the automatic armig of area A Log Part Omits Areas assiged to Log Part Omits respod as follows: Whe a assiged area is part armed, all the zoes that are omitted for that area are logged i the evet log Areas ot assiged to Log Part Omit will ever log the zoes that are omitted i the evet log whe the area is part armed Multi Kock Area Areas assiged to Multi Kock Area will respod as follows: Zoes with the Double Kock attribute will use the multiple kock value set up i sstem optios for zoe activatios (see page 74 for details) Areas ot assiged to Multi Kock Area will use the stadard 2 kocks for zoe activatios. For the Multi Kock Area feature to work, the zoe must be programmed with the Double Kock attribute (see page 58 for details) UDL Kepad Areas assiged to UDL Kepad ca be cotrolled i.e. armed, disarmed, reset etc. from the O Lie Kepad whe usig the Witex software ad a PC. Areas ot assiged to UDL Kepad caot be cotrolled i.e. armed, disarmed, reset etc. from the O Lie Kepad whe usig the Witex software ad a PC Auto Chime (C2A) Areas assiged to Auto Chime will respod as follows: Zoes assiged to the selected areas that have bee programmed for Chime will ol chime whe Custom Output 2, Stage A is o Areas ot assiged to Auto Chime will ol chime whe chime for that area is mauall eabled b the user. DD 243 Optios To compl with DD 243, durig the ormal etr dela, the cotrol pael must prevet a Cofirmed Itruder Alarm from beig reported to the Alarm Receivig Cetre. If a Portable ACE i.e. Electroic Keswitch, Ke Fob, Tag, Swipe Card etc is beig used for disarmig, it is permissible for the Cofirmed Itruder Alarm sigal to be re-eabled after the etr dela has expired. The followig two optios have bee provided to esure that the cotrol pael ca be programmed to compl with this stadard if required. WARNING Owig to the abilit to disable ALL of the cofirmatio facilities, the customer should be advised i writig b the alarm compa that ALL meas of alarm cofirmatio are disabled whe the iitial etr door is opeed. The alarm compa should the obtai writte acceptace from the customer of the disablig of the meas of alarm cofirmatio Cofirm i Etr Areas assiged to Cofirm i Etr will respod as follows: If the etr mode is started for the selected area ad a Cofirmed Itruder alarm occurs i that area, Cofirmed Itruder alarm evets (for that area) are reported to the Alarm Receivig Cetre Areas ot assiged to Cofirm i Etr will ever report Cofirmed Itruder alarm evets to the Alarm Receivig Cetre durig the etr mode. 66 INS To compl with DD 243, areas must NOT be assiged to this optio, thus prevetig Cofirmed Itruder Alarms from beig reported to the Alarm Receivig Cetre durig the etr mode Cof. after Etr Areas assiged to Cof. After Etr will respod as follows: Alarm cofirmatio is ONLY disabled for the duratio of the Etr Time ad is RE-ENABLED oce the Etr Time has expired, after which activatio of a further two zoes that are ot o the etr route must occur before the Alarm Cofirmatio output will activate

67 Premier Elite Series Istallatio Maual Areas ot assiged to Cof. After Etr will ever report Cofirmed Itruder alarm evets to the Alarm Receivig Cetre after the etr dela has expired. To compl with DD 243, areas must NOT be assiged to this optio, thus prevetig Cofirmed Itruder Alarms from beig reported to the Alarm Receivig Cetre after the etr dela has expired. If a Portable ACE i.e. Electroic Keswitch, Ke fob, Tag, Swipe Card etc. is used to disarm the sstem, it is permissible for the Cofirmed Itruder Alarm sigal to be re-eabled after the etr dela has expired. I this case, areas CAN be assiged to Cof. After Etr Part Arm Eabled Areas assiged to Part Arm Eabled ca be Part Armed. Areas ot assiged to Part Arm Eabled caot be Part Armed Bell Squawk Areas assiged to Bell Squawk will respod as follows: Whe all of the assiged areas are full armed, the bell will activate oce for 2 secods, whe a oe of the assiged areas are disarmed, the bell will activate twice for 2 secods ad whe a oe of the assiged areas are disarmed followig a alarm, the bell will activate five times for 2 secods. Areas ot assiged to Bell Squawk will ot activate the Bell output whe armig or disarmig FOB After Etr Areas assiged to FOB After Etr ca ol be disarmed with a Radio FOB oce the Etr procedure has bee started. Areas ot assiged to FOB After Etr ca be disarmed with a Radio FOB at a time Armed = Coms Whe Areas are assiged to Armed = Coms the sstem will respod as follows: Commuicatios ad outputs (Alarm, Cofirmed etc.) for ALL areas will ol operate whe all of the assiged areas are armed. Whe No Areas are assiged to Armed = Coms the sstem will respod as follows: Commuicatios ad outputs (Alarm, Cofirmed etc.) for ALL areas will operate as ormal Wire Smoke Areas assiged to 2-Wire Smoke will register a Fire Alarm whe a 2-Wire Smoke detector activates. Areas ot assiged to 2-Wire Smoke will ot register a Fire Alarm whe a 2-Wire Smoke detector activates Faults Eg Reset Each area ca be programmed for Egieer or User reset followig a Fault. Areas Assiged to Faults Eg Reset will respod as follows: The assiged areas ca ol be reset usig a Egieer code If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to Faults Eg Reset ca be reset with a User code that is valid for those areas No ATS Eg Reset Each area ca be programmed for Egieer or User reset followig a No ATS Available fault (ATS = Alarm Trasmissio Sstem). Areas Assiged to No ATS Eg Reset will respod as follows: The assiged areas ca ol be reset usig a Egieer code If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to No ATS Eg Rst ca be reset with a User code that is valid for those areas AC Fail Eg Reset Each area ca be programmed for Egieer or User reset followig a AC Mais Fail. Areas assiged to AC Fail Eg Reset will respod as follows: Area Programmig The assiged areas ca ol be reset usig a Egieer code If Ati-code Reset is eabled (optio 13) the assiged areas ca also be reset usig the Ati-code Areas ot assiged to AC Fail Eg Reset ca be reset with a User code that is valid for those areas Mask Whe Armed Areas assiged to Mask Whe Armed will register a Maskig fault whe the selected areas are armed ad a Maskig Fault occurs. Areas ot assiged Mask Whe Armed will ever register a Maskig fault whe the selected areas are armed ad a Maskig Fault occurs 39 - No Armig Before BCD This optio prevets Areas armig util other associated Areas selected i the optio are armed. For example i a sstem with 4 Area's (A,B,C,ad D) do ot allow Armig of A util C ad D are armed. I this case D could be a Safe or Vault Area C could be a strog room, Area B could be a Receptio ad Area A the mai etr/exit route. Area A Area B Area C Area D Etr/Exit Receptio Area Strog Room Vault Ca ol be armed if B, C & D are Armed Must be armed to allow Area A to be armed Must be armed to allow Area A to be armed Must be armed to allow Area A to be armed A message "Armig Preveted" with the associated areas displaed ad a error beep will be preseted to the User if the tr ad arm a area that is restricted. INS

68 Area Programmig Premier Elite Series Istallatio Maual Time Arm Area Area Text E o elec: ea ogaig ea ogaig ies 6 ea ogaig ie eas ea ed ie ea ed ie 5 ea ed ie ea ed ie ad isa ie 3 ad isa ie 3 E o elec: ea ogaig ea ogaig ies 7 ea ogaig ea e e o ea 4 e o ea ^Edi e ecepio Edi e^ Text ma be assiged to each of the areas o the sstem. This allows the user to select the areas b descriptio istead of a letter. A maximum of 16 characters ca be programmed for each of the areas. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). ad isa ie 3 The alarm sstem as a whole or a umber of idividual areas ca be automaticall armed or disarmed usig the built i cotrol timers. The 24 has 2 idepedet cotrol timers, the 48 has 4 idepedet cotrol timers the have 8 idepedet cotrol timers, ad the 640 has 8 idepedet cotrol timers for each of the 4 Area groups. These ma be cofigured to switch o ad off at differet poits of the da ad operate o differet das of the week (see page 75 for programmig details). 68 INS176-15

69 Premier Elite Series Istallatio Maual Global Optios 5.3 Global Optios Sstem Timers E o elec: loal pios loal pios se ies Ei ele ie ecod(s) loal ell l ie(s) loal ell l ie(s) These timers cotrol various timig ad dela fuctios. Each timer ca be programmed for a value betwee 000 ad Exit Settle Time Whe usig the Etr/Exit or Exit Termiator armig mode, some detectors alog the exit route ca remai active for a umber of secods followig activatio. This timer esures that the detectors are give time to deactivate before the sstem/area arms. 1 - Global Bell Dl. This timer cotrols the dela betwee a Itruder alarm occurrig ad the Bell/Strobe output activatig. 2 - Global Bell Dur. This timer cotrols the duratio of the Bell output after a alarm has occurred ad a programmed Global Bell Dela time has expired. 3 - Double Kock Dl If a zoe has the Double Kock attribute a alarm will ol occur if the zoe activates twice withi this time widow or oce for the duratio of this time widow. If multi kocks has bee set up (see page 74 for details) the zoe ma have to be activated more tha twice. 4 - Beam Pair Time If a zoe has the Beam Pair attribute, a alarm will ol occur if aother zoe with the Beam Pair attribute (assiged to the same area) is activated withi this time widow. 5 - Activit Dela If a zoe has the Activit attribute ad it is ot activated durig this timer ad Cofig. optio 14 has bee set to View Act. Fault (see page 71 for details), it will be idicated to the user whe the tr to arm the sstem/area. 6 - Abort Dela Whe a Itruder alarm occurs this timer is started, if the area is disarmed withi this time widow a Abort evet will be reported to the Alarm Receivig Cetre. If the sstem is disarmed after this period the Abort evet is ot reported. 7 - Courtes Time This timer cotrols the duratio of the Courtes output tpe. The courtes output activates wheever a kepad is beig used ad durig the etr mode. 8 - Defer Armig B If a area tries to Time Arm ad a valid User code is etered, this timer is started ad the Time Armig procedure is postpoed. Whe this timer expires, the sstem/area will tr to arm itself agai. 9 - Auto Arm Dela Whe a area assiged to Auto Arm Areas is disarmed (see page 66 for details) this timer is started. Ever time a detector i that area is activated, the timer is restarted. If the timer is allowed to expire i.e. o detectors i the assiged area are activated, the area will arm itself Meu Time Out This timer cotrols the legth of time that a user ca remai i a meu before the sstem automaticall returs to the ormal da mode Pulse Period 1 This timer cotrols how log a output with the Pulse Period 1 attribute assiged to it will activate for Pulse Period 2 This timer cotrols how log a output with the Pulse Period 2 attribute assiged to it will activate for Pulse Period 3 This timer cotrols how log a output with the Pulse Period 3 attribute assiged to it will activate for ATS Fault Dela This timer cotrols the dela betwee a lie fault occurrig ad a audible idicatio beig geerated b the sstem AC Off Dela This timer cotrols the dela betwee a AC Mais failure occurrig ad a audible idicatio beig geerated b the 16 - Batt Test Period This timer cotrols the frequec of the damic batter test Batt Test Time This timer cotrols how log the damic batter test is carried out for Soak Test Time This timer cotrols the umber of das a zoe with the Test attribute will remai o test for Service Iterval This timer cotrols the frequec of the Service Required coditio occurrig Test Call Ever This timer cotrols how ofte a test call is made to the moitorig statio. 024 = dail etc Mi. Radom Time This timer cotrols the miimum legth of time that the Radom output attribute will activate for Max. Radom Time This timer cotrols the maximum legth of time that the Radom output attribute will activate for Door Strike Time This timer cotrols the legth of time that the Door Strike output will activate for wheever a code with the Door Strike attribute is etered Zoe Respose This timer cotrols the legth of time that a zoe with the Quick Resp. attribute, has to be activated for, i order to be recogised b the cotrol pael Kepad PA Dela Whe kepad optio 6 is programmed as PA Delaed (see page 80 for details), ad a kepad PA alarm (1 & 3) is activated, this timer starts. If a User code is etered before this timer expires, o PA alarm will occur. However, if a User code is ot etered before this timer expires, a PA alarm will occur Cofirmatio Dl Whe a Itruder alarm occurs, this timer starts. If a secod (differet) zoe is activated withi this time widow, the Cofirmed output will activate. Whe this timer expires, the Cofirmed output will o loger activate. INS

70 Global Optios 27 - Warig Dela Whe a Custom zoe with the Warig Req attribute (see page 59 for details) activates, this timer is started. If the zoe is still active whe this timer expires a warig toe or alarm will occur ad the Warig Output (see page 87 for details) will activate Kepad Lock Time Whe code tampers are programmed to lockout the kepad (see page 71 for details), the kepad will lock out for the duratio of this timer Eg. log off Dl This timer starts whe a Egieers code is etered. Whe the timer expires the egieer is automaticall logged out of egieer s mode. This timer is suspeded if there are tamper faults o the sstem allowig the egieer to remai i egieer s mode idefiitel whilst o site Fire Bell Dela This timer starts whe a fire alarm is geerated i a particular area. Whe the timer expires souders are activated i ALL areas Forced Etr Dl Whe a zoe with the Guard attribute (see page 58 for details) activates, this timer is started. For the duratio of this timer, a Etr/Exit 1 or 2 zoe with the Etr/Exit 2 attribute (see page 58 for details) will become a Guard zoe. Whe this timer expires, the Etr/Exit 1 or 2 zoe will revert back to its ormal mode of operatio Supervisio Time This timer cotrols the frequec at which the Ricochet devices are required to report i to the cotrol pael Poll IP Ever This timer cotrols the frequec that the ComIP Polls the ARC Cofirmed PA Timer Whe a PA alarm occurs, this timer starts. If a secod (differet) PA zoe is activated withi this time widow, the Cofirmed PA output will activate. Whe this timer expires, the Cofirmed PA output will o loger activate Seismic Timer 1* 36 - Seismic Timer 2* 37 - Seismic Timer 3* *Reserved for future use Sstem Cofig. E o elec: loal pios loal pios se ies 1 loal pios se oig oigaio o ell e ail oigaio is Uloced oigaio is oced Premier Elite Series Istallatio Maual These optios cotrol how various sstem fuctios work No Bell Arm Fail If a area fails to arm, a Iteral alarm will occur ad the Strobe output will activate. Bell o Arm Fail If a area fails to arm, a Iteral alarm will occur ad the Bell output will activate for 10 secods. The Strobe output will also activate for 5 secods to idicate that the sstem has armed/disarmed Bell is a SAB The Bell output o the cotrol pael applies 0V whe active. Bell is a SCB The Bell' output o the cotrol pael removes 0V whe active Clock is 24Hr The sstem time is displaed i the 24-Hour format. Clock is 12Hr (Default) The sstem time is displaed i the 12-Hour format Auto BST/GMT The sstem clock will adjust itself at the begiig ad the ed of the summer (the clock will automaticall gai 1Hr o the last Suda i March ad lose 1Hr o the last Suda i October. Maual BST/GMT The sstem clock will ot adjust itself at the begiig ad the ed of the summer (the clock will have to be adjusted mauall) View Armed Areas Whe the sstem is part armed, the areas that are armed are displaed ad alarm iformatio is displaed before a valid User code is etered. Hide Armed Areas Whe the sstem is part armed, the areas that are armed are ot displaed ad alarm iformatio is ol displaed after a valid User code has bee etered. 70 INS176-15

71 Premier Elite Series Istallatio Maual 05 Global Bell Time Whe all areas are armed, the sstem uses the Global Bell Dela ad Global Bell Duratio timers (see page 69 for details). Area Bell Time Whe all areas are armed, the sstem uses the Area Bell Dela ad Area Bell Duratio timers (see page 61 for details) Hr Omit Global 24-Hour tpe zoes ca be omitted from a kepad. 24Hr Omit Local Ol kepads assiged to the same area as the 24-Hour tpe zoes ca be used to omit the zoe Remove Omits Whe zoes have bee Omitted b a user, the zoes will be automaticall reistated b the sstem whe the area the are assiged to is ext disarmed. Leave Omits Whe zoes have bee Omitted b a user, the zoes will remai omitted util the user reistates them Override Com Dl If a area is Full armed ad a Itruder alarm occurs i that area, Itruder alarm evets (for that area) are reported to the Alarm Receivig Cetre immediatel. Eforce Com Dl If a area is Full armed ad a Itruder alarm occurs i that area, Itruder alarm evets (for that area) are reported to the Alarm Receivig Cetre after a programmed Coms dela has expired (see page 61 for details) NVM is Ulocked The factor default settigs ca be reloaded b pressig the Factor Restart butto durig power up. NVM is Locked The factor default settigs caot be reloaded b pressig the factor default butto durig power up. If the NVM is locked ad the Egieer User code has bee lost or forgotte, the PCB will have to be replaced User + Egieer Access to the Egieers Programmig mode ca ol be obtaied, if a User (with the Egieer Access attribute) has authorised egieer access (see page 126 for details). Egieer Ol Access to the Egieers Programmig meus ca be obtaied b just eterig the Egieer User code Chime Audible Zoes programmed with the Chime 2 or 3 attribute will ol geerate a Chime toe. Chime Visible (Default) Zoes programmed with the Chime 2 or 3 attribute will geerate a Chime toe. The kepad will also displa the umber of the zoe that was activated Omit Tampers Yes A user ca omit Tamper faults o a zoe. Omit Tampers No A user caot omit Tamper faults o a zoe. To compl with EN50131 at Grade 2 & 3 this should be set to NO Olie Pritig If a priter is plugged oto the cotrol pael, athig that is logged i the evet log is also prited at the same time. Offlie Pritig If a priter is plugged oto the cotrol pael, othig will be prited uless a pritout is requested (see page 136 for details) Hide Act. Fault If a zoe with the Activit attribute is ot activated durig the Activit Dela time widow, the area that the zoe is assiged to ca still be armed. However, this fault will be idicated to the user whe the tr to arm the area. Global Optios View Act. Fault If a zoe with the Activit attribute is ot activated durig the Activit Dela time widow, the area that the zoe is assiged to caot be armed. This situatio ca ol be overcome b activatig the zoe Hide Exit Errors If a user tries to arm a area ad there are zoes activated, the exit mode will cotiue (givig a visual ad audible idicatio that there is a problem). View Exit Error If a user tries to arm a area ad there are zoes activated, the exit mode is suspeded util all of the zoes are secure Eable Code Tampers 24 ivalid ke presses o a kepad will cause a Code Tamper coditio (see optio 17). No Code Tampers A Code Tamper coditio will ever occur whe the kes o a kepad are pressed more tha 24 times Code Tamper Alarm A Code Tamper coditio will cause a Tamper alarm i the areas that the kepad is assiged to. Code Tamper Lockout A Code Tamper coditio will cause the kepad to lockout for the duratio of the kepad lockout timer (see page 69). Optio 16 above must be set to eable code tampers i order for this optio to work Areas A-H & I-P The first 8 areas will be displaed as letters A through to H ad the last 8 areas will be displaed as letters I through to P. Areas 1-8 & I-P The first 8 areas will be displaed as umbers 1 through to 8 ad the last 8 areas will be displaed as letters I through to P Auto Area Select Whe a Egieers code is etered to gai access to the programmig mode, ALL Zoes ad Tampers are disabled i.e. if a Tampers, PA, Fire or Medical Alarms are activated - NOTHING WILL HAPPEN. Ma. Area Select Whe a Egieers code is etered to gai access to the programmig mode, the Egieer will have to select which areas are goig to be worked o. Zoes ad Tampers are ol disabled for the selected areas all other areas will respod to zoe activatios ad tampers as ormal Predictive Text Whe i text editig mode, the cotrol pael will automaticall select predictive text. Maual Text Edit Whe i text editig mode, the cotrol pael will automaticall select ormal text Short = Tamper The cotrol pael will see a zoe that is i the short circuit coditio as a Tamper. Short = Active The cotrol pael will see a zoe that is i the short circuit coditio as Active R/R=Reset Ol Whe 0V is applied to the cotrol pael R/R iput, a areas programmed for ati-code reset (see page 65 for details) that are i alarm, will be reset. R/R=Silece/RST Whe 0V is applied to the cotrol pael R/R iput a areas programmed for ati-code reset (see page 65 for details) that are i alarm, will be sileced. Whe 0V is applied to the R/R iput a secod time, the areas will be reset (this would ormall be used whe Audio Verificatio is required). INS

72 Global Optios 23 - User Code Pulse Eterig a user code which has a associated user output will cause the output to activate for the duratio of the door strike timer. User Code Latch Eterig a user code which has a associated user output will cause the output to toggle from off to o or from o to off Timed Test Call A test call to the Alarm Receivig Cetre will occur ever time the Test Call Ever timer expires. Test Call = CT4 A test call to the Alarm Receivig Cetre will occur ever time Cotrol Timer 4 activates Batt Test Timed A batter test will occur ever time the Batt Test Period timer expires. Batt Test = Disarm A batter test will occur ever time the sstem is disarmed or after the Batt Test Period timer has expired (whichever occurs first) Bell = 1st Alarm The Bell ad Strobe outputs will activate after a Itruder alarm (1st Alarm) occurs. Bell = 2d Alarm The Bell ad Strobe outputs will activate after a Cofirmed alarm (2d Alarm) occurs SNDR = 1st Alarm The iteral souders will soud after a Itruder alarm (1st Alarm) occurs. SNDR = 2d Alarm The iteral souders will soud after a Cofirmed alarm (2d Alarm) occurs Cof. = Istat Followig the armig of the sstem/area, if two zoes activate (causig a Cofirmed alarm), the sigal will be reported to the Alarm Receivig Cetre immediatel. Cof. = Delaed Followig the armig of the sstem/area, if two zoes activate (causig a Cofirmed alarm), the sigal will ol be reported to the Alarm Receivig Cetre after the Abort time has expired Abort=Eg.Reset A Itruder alarm that is aborted ca ol be reset b a Egieer/Ati-code. Abort=User Reset A Itruder alarm that is aborted ca be reset b a User. 30 Auto AV Output Whe usig the AV Module, if a microphoe is remotel selected, the correspodig output automaticall activates. Maual AV Output Whe usig the AV Module, if a microphoe is remotel selected, the correspodig output must be activated mauall Clock = 50Hz The iteral clock o the cotrol pael rus from the 50Hz mai frequec. Clock = Crstal The iteral clock o the cotrol pael rus from the built-i crstal Colum Prit Select this optio whe coectig a 80 Colum priter to the cotrol pael. 40 Colum Prit Select this optio whe coectig a 40 Colum priter to the cotrol pael Disable Text Areas that are armed are displaed as letters o the bottom lie of the displa i.e. Armed: AB.D Eable Text Areas that are armed are displaed usig their assiged text o the bottom lie of the displa i.e. Armed: Garage, Office etc. (a differet area is displaed ever secod). Premier Elite Series Istallatio Maual 34 - EN50131 Eabled Kepad displa blakig is eabled i.e. the kepad will ol displa the time, date ad the baer message. If iformatio is available to be viewed i.e. AC Mais Fail, Lie Fault, Sstem Faults etc. the kepad will bleep ever 30 secods ad displa Sstem Alerts, this iformatio ca ol be viewed after a valid user code has bee etered. The kepad displa will the blak agai 30 secods after. The bell output will ot activate, if a alarm occurs durig the etr mode. EN50131 Disabled The Cotrol Paels EN50131 optios are disabled. Duress Codes ca ol be programmed b a egieer 35-1st Zoe = Cofirm After the etr timer has expired, activatio of 1 more zoe is required to geerate a Cofirmed alarm. 2d Zoe = Cofirm After the etr timer has expired, activatio of 2 more zoes is required to geerate a Cofirmed alarm 36 - Kepads Global Kepads show iformatio for all areas. Kepads Local Kepads ol show iformatio that is relative to the area that the kepad is assiged to Pael Grade 2 All optios relatig to PD6662: 2004/EN Grade 3 that are ot required for Grade 2 are disabled automaticall. Also, the Ati-code reset becomes the stadard 4 digit umber ad all user ad egieer codes ca be 4, 5 or 6 digits. Pael Grade 3 All optios relatig to PD6662: 2004/EN Grade 3 are eabled automaticall. Also, the Ati-code reset becomes a 6-digit umber ad all user codes ca ol be programmed as 5 or 6 digits Disable FOB PA Whe a Smartke Trasmitter FOB is beig used with the alarm sstem, the Paic Alarm (PA) fuctio i.e. Pressig buttos 1 ad 2 together, is disabled. Eable RF FOB PA Whe a Smartke Trasmitter FOB is beig used with the alarm sstem, the Paic Alarm (PA) fuctio i.e. Pressig buttos 1 ad 2 together, is eabled Armed Mask=Fault If a Ati-maskig sigal is detected whe the sstem is armed, the cotrol pael will geerate a Fault respose. Armed Mask=Alarm If a Ati-maskig sigal is detected whe the sstem is armed, the cotrol pael will geerate a Alarm respose Audible FOB PA PA alarms geerated from a wireless FOB will cause a Audible alarm. Silet RF FOB PA PA alarms geerated from a wireless FOB will cause a silet alarm. 41 Moitor PSU Batter Batter faults from the PSU200XP are moitored. No PSU Batt Flts Batter faults from the PSU200XP are ot moitored. 42 Exp Loss Tamp A expader lost evet will geerate a tamper alarm. A zoes programmed o the expader will also report a tamper ad alarm coditio, ad if cofigured to do so will geerate or cotribute to a Cofirmed Alarm. No Exp Loss Tamp A expader lost evet will geerate a tamper/fault coditio, however a zoes used will ot be reported as tamper ad alarm. 43 Soak Test War If zoes have bee placed o Soak Test, a warig will be show to the user at the time of armig. 72 INS176-15

73 Premier Elite Series Istallatio Maual No Soak Test War If zoes have bee placed o Soak Test, o warig will be show to the user at the time of armig. 44 FOB Batt War Whe durig armig if a low fob batter evet is received the armig will be cacelled ad the kepad will geerate a warig, the user will have to affirm the Arm with faults o the kepad before armig will proceed. Both the low batter ad the user ackowledgemet will be logged. No FOB Batt War Whe durig armig if a low fob batter evet is received the armig will proceed but the low fob batter will be logged i the evet log. 45 Etr Stra Eables Etr Stra to compl with BS8243 or EN This flag is selectable b cofigurig optio 46. No Etr Stra Disables Etr Stra 46 BS Etr Stra A secod alarm coditio durig the alarm otificatio period will immediatel expire the alarm otificatio timer. This will cause a cofirmed alarm message to be set to the arc ad logged i the evet log. No BS Etr Stra Secod ad subsequet alarm coditios durig the alarm otificatio period have o effect o the timer. 47 Tamp No Cofirm If a device has caused a ucofirmed alarm the a tamper from that same device will ot cause a cofirmed alarm. Tamper Cofirm If a device has caused a ucofirmed alarm the a tamper from that same device will cause a cofirmed alarm. 48 Radio 2 Step Arm Whe armig usig a wireless FOB. The armig procedure requires two steps. Radio 1 Step Arm Whe armig usig a wireless FOB. The armig procedure requires oe step Radio Step 2 Zoe Whe cofiguratio optio 48 is programmed as Radio 2 Step Arm the secod step of the armig procedure is the activatio of a zoe programmed as Guard Access. Radio Step 2 RKP Whe cofiguratio optio 48 is programmed as Radio 2 Step Arm the secod step of the armig procedure is cofirmatio via the kepad 50 Cof Hold Up EN Oce a PA zoe is activated the hold-up timer is started (See Global Sstem Timers for Cofirmed PA Timer), the cofirmed alarm will geerate if oe of the followig happes, aother PA Zoe activated or a tamper from a device, multi-actio PA or a global tamper withi the timer period. No Cof Hold Up No cofirmed hold-up will be geerated. 51 Max Log msgs 3 Log evets from idividual sources are limited to 3. No Max Log msgs Log evets from idividual sources are ot limited to Code Etr Timed Whe 10 failed code attempts have bee made, the kepad will lock out for 90 secods. If the pael is grade 2 a further 10 failed code etr attempts the will kepad will locked out for 90 secods. If the pael is grade 3 the after ever sigle failed code etr attempt the kepad will lock out for 90 secods. After 21 failed code etr attempts the code tamper alarm is geerated ad logged. No code Et Time Failed code etr attempts will ot lock out kepads or geerate a code tamper 53 Eable PD6662:2010 Global Optios The pael will be defaulted to operate accordig to PD6662:2010 Disable PD6662:2010 The pael will operate accordig to the requiremets of PD6662: Aux Iput = Tamper will log ad report a Tamper from the Aux iput. Aux Iput = Fault will report ad log a Aux Fault from the Aux iput Bell Squawk o Part Arm the bell will squawk whe the sstem is part armed. No Bell Squawk o Part Arm the bell will ot squawk whe the sstem is part armed Do ot Displa Ope Zoes Ope or active zoes will ot be displaed o the relevat kepads. Displa Ope Zoes Ope or active zoes will be displaed o the relevat kepads Do ot Eable Batter Replacemet Mode User 01 with the Master User tpe will ot have access to a ew optio i the user meu "Start Batter Replacemet". Eable Batter Replacemet Mode User 01 with the Master User tpe will have access to a ew optio i the user meu "Start Batter Replacemet". 58 Remote Armig Istat Remote armig from a PC through Witex, or mobile apps will be istat. Remote Armig Timed Remote armig will be timed ad use the Exit Time programmed for the area beig armed. This optio should be chose to compl with IA1501 & PD6662. INS

74 Global Optios Sstem Optios E o elec: loal pios loal pios se ies loal pios se pios diso ole eel = hie ole eel = hie ole eel = 8 hie ole eel = 8 These optios cotrol various sstem fuctios. 0 - Advisor Volume Cotrols the volume of advisor toes (etr/exit etc.) from loudspeakers coected to the cotrol pael (Alarm toes are alwas full volume). 1 = mi, 8 = max. 1 - Chime Volume Cotrols the volume level of Chime toes from ALL loudspeakers. 1 = mi, 8 = max. 2 - No. Of Re-Arms Cotrols the umber of times that a zoe will re-arm. Oce the re-arm limit has bee reached, the zoe is Locked Out ad will ot cause a further Itruder alarms. 3 - Ati-code Resets Limits how ma times a user ca perform a Ati-code reset. Oce this limit is bee reached, the sstem ca ol be reset usig a Egieer code. This couter is reset ever moth or wheever a Egieers code is etered. 4 - Multiple Kocks Cotrols how ma times, a zoe with the Double Kock attribute, must be activated, before a alarm occurs. The multiple kock cout ca be applied to zoes o a area basis, see page 66 for details. 5 - Clock Adjustmet Adjusts the accurac of the clock b subtractig or addig time i secods at midight ever ight. 0 = -50, 50 = 0 (o correctio), 100 = Quick Cout Set the umber of 10milli Secod pulses that are required withi 30 Secods i order for a zoe with the Quick Respose attribute to activate. 7 - Modem Level Whe usig a Com2400 this optio allows adjustmet to the atteuatio of the modem. Modem Level Atteuatio (db) Laguage Selectio Various laguages are available for the cotrol paels. Listed below are the laguage sets, ad the laguages available. The Laguage set Premier Elite Series Istallatio Maual umber is defied o the product label where applicable b LS1, LS2 or LS3. The 640 has all laguages listed available i the cotrol pael. 12/24/48/64/88/168/640 LS1 LS2 LS3 Eglish (UK) Eglish Frech Dutch Germa Eglish Spaish Italia Portuguese Greek Eglish Russia Czech 1 Czech 2 Slovak LS4 LS5 LS6 Eglish Swedish Daish Norwegia Fiish Eglish Hugaria Polish Sloveia Estoia Eglish Idia 9 - Coutr Codes & Defaults Coutr codes are used to defie Telecoms requiremets, ad defaults are loaded if available whe the coutr code is chose. The followig coutr codes are available ad show the associated defaults loaded b the pael. Coutr Code Defaults Export 000 UK Russia 007 UK South Africa 027 South Africa Netherlads 031 Netherlads Belgium 032 Belgium Frace 033 Frace Spai 034 UK Hugar 036 Hugar Ital 039 UK Czech 042 UK UK 044 UK Demark 045 Demark Swede 046 Swede Norwa 047 Norwa Polad 048 UK Germa 049 UK Filad 058 Norwa Australia 061 Australia Estoia 172 (372) UK 74 INS176-15

75 Premier Elite Series Istallatio Maual Global Optios Moitor Hardware Cotrol Timers E o elec: loal pios loal pios se ies 3 loal pios oio Hadae oio Hadae ah als ell ape ell ape The cotrol pael moitors ma iputs for fault coditios i.e. the pael lid tamper, bell tamper, aux fuse etc. Each oe of these optios ca be disabled to overcome problems related to the devices beig moitored. P - ATS Path Faults The Alarm Trasmissio Sstem is moitored for faults. A - AC Power Failure The AC Mais is moitored for faults. O - Power Outputs/Charger The Power outputs ad charger are moitored for faults. see page 122 for the list of Power Outputs moitored) B - Bell Tamper The exteral souder tamper loop is moitored for faults. A - Aux Tamper The auxiliar tamper loop is moitored for faults. L - Pael Lid Tamper The cotrol pael lid tamper is moitored for faults. B - Batter Faults The batter is moitored for faults. E o elec: loal pios loal pios se ies 4 loal pios ool ies ool ie a is a 3: ool ie a is a 3: ool ie a is a : ie a as 1 ie a as ool ie a is a : ool ie a is a :34 iea as 1 iea as The 48 has 4 cotrol timers ad the 88,168 ad 640 have 8 cotrol timers. Each timer has two ON ad OFF times (a & b), ad ca be programmed to operate o a da of the week. Oce cofigured, the timers ca be used to arm or disarm areas, lockout users ad cotrol outputs. Whe programmig the Cotrol Timers ON time, pressig C will brig a * up o the displa. This * idicates that the iteral souders will chime ever time the Cotrol Timers ON time is reached. Whe programmig the Cotrol Timers DAYS of operatio, pressig 8 will brig HO up o the displa. This HO idicates that the cotrol timer will operate o a programmed Holida date. INS

76 Global Optios Premier Elite Series Istallatio Maual Sstem Text Part Arm Text E o elec: loal pios loal pios se ies 5 loal pios se e E o EI: ese essage 4 E o EI: ae essage ^Edi e Edi ^ ^ Edi e las Edi e ^ The sstem has 7 programmable messages. 1 - Reset Message This 32-character message is displaed wheever the cotrol pael requires a Egieer reset. 2 - Ati-code Msg. This 32-character message is displaed wheever the cotrol pael requires a Ati-code Reset. 3 - Service Message This 32-character message is displaed wheever the cotrol pael requires Datime reset. 4 - Locatio Text This 32-character message is displaed wheever the egieer views the locatio text i Egieer Utils. 5 - Baer Message This 16-character message is displaed above the time ad date wheever the cotrol pael is uarmed or full armed. 6 - Part Arm Baer This 16-character message is displaed above the time ad date wheever the cotrol pael is part armed. 7 - Priter Header This 16-character header will be prited wheever a log pritout is take from the cotrol pael or a Short Message Service (SMS) text message is set to a mobile phoe. E o elec: loal pios loal pios se ies 6 loal pios a e Eeig e o a 3 edie e o a 3 ^Edi e edie ^Edi e ^ ^Edi e ighie seig ^Edi e Text ma be assiged to Part Arm 1, 2 or 3 to allow the user to select the correct Part Arm b descriptio istead of umber. A maximum of 16 characters ca be programmed for each of the Part Arms. The 3 Part Arm messages are global messages ad will appear wheever oe of the part arms are selected regardless of which area is beig part armed. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). 76 INS176-15

77 Premier Elite Series Istallatio Maual Global Optios Holida Dates Speaker Toes E o elec: loal pios loal pios se ies 7 loal pios Holida aes Holida ae // Holida ae 3 // Holida ae 3 // Ee e dae 3// The sstem has 24 programmable holida dates. The holida dates are pre-defied dates o which the Cotrol Timers will ot operate. Example Cotrol Timer 1 is programmed to operate betwee the hours of 8pm ad 8am o Moda through to Frida (for the purpose of armig the cotrol pael). Because Bak Holidas ormall fall o Modas the pael would disarm itself leavig the premises uprotected. Christmas da 2001 falls o a Tuesda Uder ormal coditios the Cotrol Timer will operate o a Tuesda The 25/12/01 is programmed as a Holida Date The Cotrol Timer does ot operate o Tuesda 25 th December 2001 ad the premises remais protected at all times E o elec: loal pios loal pios se ies 8 loal pios peae oes peae oes E ie oes E E oes E E oes The speaker output o the cotrol pael ca be programmed so that certai tpes of toes are ot geerated. Whe deselected, Fire, Alarms, Fault, Service, Etr, Exit ad Chime toes will ot be heard. Select toes b pressig kes 1 to 8 (a letter o the displa meas the toe is selected, a Dot o the displa meas the toe is ot selected). F - Fire Toes O Fire alarm toes will be geerated b the cotrol pael souder/speaker. A - Alarm Toes O Itruder alarm, Tamper alarm ad PA alarm toes will be geerated b the cotrol pael souder/speaker. F - Fault Toes O Fault toes will be geerated b the cotrol pael souder/speaker. S - Service Toe O Service ad Warig toes will be geerated b the cotrol pael souder/speaker. E - Etr Toes O Etr toes will be geerated b the cotrol pael souder/speaker. X - Exit Toes O Exit toes will be geerated b the cotrol pael souder/speaker. C - Chime Toes O Chime 1, 2 ad 3 toes will be geerated b the cotrol pael souder/speaker. INS

78 Global Optios PC Output Text Custom O/P Text Premier Elite Series Istallatio Maual E o elec: loal pios loal pios se ies 9 loal pios p e p e 4 p 4 e ^Edi e eal Heaig Edi e ^^ Edi e eal Heaig Edi e ^ Text ma be assiged to PC Cotrol Outputs 1 to 8 to allow the user to select the correct Output b descriptio istead of umber. A maximum of 16 characters ca be programmed for each of the PC Outputs. E o elec: loal pios loal pios se ies 9 loal pios so / e so / e 3 so /3 e ^Edi e os cie Edi e ^^ Text ma be assiged to Custom Outputs 1 to 4 to allow idicatio o the kepads displa whe the output is active (see page 89 for details). Outputs 1 & 2 are silet ad outputs 3 & 4 give a audible warig ever 30 secods for 3 miutes or util a code is etered or RESET is pressed. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press to move the cursor alog). 78 INS176-15

79 Premier Elite Series Istallatio Maual Kepad Setup 5.4 Kepad Setup E o elec: Kepad ep K eas: K3 eas: R K3 eas: < 2 K3 eas: < K3 appig Z Z R K3 Z Z appig K3 Z Z appig K3 appig Z Z K3 pios: R isaled is ile is ile K3 ole: eel = 4 R K3 ole: eel =4 K3 ole: eel = K3 ods: E ie oes E E oes E E oes K3 eas: A A K3 eas: EH< CP A K3 eas: IJK INS

80 Kepad Setup Kepad Areas Kepads ca be assiged to a umber of areas, assigig a kepad to a area determies: Which areas the souder ad speaker output i the kepad will geerate toes for i.e. if the kepad is assiged to areas A ad C, the souder/speaker will ol operate whe areas A or C are i alarm, etr, exit etc. Which areas ca be armed or disarmed from that kepad whe usig codes that have the Local Armig or Local Disarmig attributes (see page 126 for details) Which areas will cause a Tamper alarm whe the kepad cover is removed Kepad Zoe Mappig The zoes i the kepad eed to be mapped to a valid zoe umber before the ca be used as part of the sstem i.e. Kepad 1 Zoe 1 could be mapped to Zoe 5 (pael) ad Zoe 2 could be mapped to Zoe 25 (expader 3) etc. Util mapped, the zoes i the kepads will ot work. A kepad zoe ca be mapped to a zoe umber o the sstem, however, whe mapped to a zoe umber that alread exists i.e. Zoe 5 (pael), that zoe ca o loger be used, o the 12-W Zoes 5-8 should be used for kepad zoe mappig. If a zoe is mapped to a zoe umber ot alread o the sstem i.e. Zoe 25 (expader 3) ad expader 3 is the added, that zoe o the expader (Zoe 25) caot be used. If ou wish to use the zoe o the expader, the kepad zoe must be remapped to a differet umber. If a zoe is remapped to a differet umber, the ew zoe umber must be treated as a ew zoe o the sstem ad therefore eeds to be programmed accordigl (the zoe programmig will NOT automaticall follow the mappig). Kepad Optios These 8 optios cotrol various kepad fuctios: Select optios b pressig kes 1 to 8 (a letter o the displa meas the optio is selected, a Dot o the displa meas the optio is ot selected). P - PA Eabled Pressig kes 1 & 3 together will cause a PA alarm. F - Fire Eabled Pressig kes 4 & 6 together will cause a Fire alarm. M - Medical Eabled Pressig kes 7 & 9 together will cause a Medical alarm. T - Tamper Eabled Removig the kepad cover will cause a Tamper alarm. A - PA is Audible A kepad PA (1 & 3) will cause a audible PA alarm. D - PA is Delaed Whe the kepad PA buttos (1 & 3) are pressed, the Kepad PA Dela timer starts, if a User code is etered before the timer expires, o PA alarm will occur. If a User code is ot etered before the timer expires, a PA alarm will occur (see page 69 for details). Q - Quick Arm is Eabled Pressig the Area or Part kes will Arm or Part Arm the areas that the kepad is assiged to without the eed to eter a User code first. O - Ifo.LED> Output The Ifo. LED o the kepad comes o whe the kepad output activates ad goes off whe the kepad output deactivates. Kepad Speaker Volume Premier Elite Series Istallatio Maual This optio cotrols the volume level of advisor toes from loudspeakers coected to the kepads. Advisor toes cosist of Etr/Exit ad Warig tpe toes. 1 = miimum; 8 = maximum. Alarm toes are alwas full volume. Kepad Souder Optios The souder ad speaker output i the kepad ca be programmed so that certai tpes of toes are ot geerated. Whe deselected, Fire, Alarms, Fault, Service, Etr, Exit ad Chime toes will ot be heard. Select toes b pressig kes 1 to 8 (a letter o the displa meas the toe is selected, a Dot o the displa meas the toe is ot selected). F - Fire Toes O Fire alarm toes will be geerated b the kepad souder/speaker. A - Alarm Toes O Itruder alarm, Tamper alarm ad PA alarm toes will be geerated b the kepad souder/speaker. F - Fault Toes O Fault toes will be geerated b the kepad souder/speaker. S - Service Toe O Service ad Warig toes will be geerated b the kepad souder/speaker. E - Etr Toes O Etr toes will be geerated b the kepad souder/speaker. X - Exit Toes O Exit toes will be geerated b the kepad souder/speaker. C - Chime Toes O Chime 1, 2 ad 3 toes will be geerated b the kepad souder/speaker. K - Use Kepad Areas Whe selected, the kepad souder ad armig cotrol is determied b the area that the kepad is assiged to. Whe deselected, the kepad becomes a Area Arm Suite cotroller (see page 62 for details). This allows differet combiatios of areas to be armed or disarmed depedig o which kepad is used ad operates as follows: Kepad 1 = Area Arm Suite 1, Kepad 2 = Area Arm Suite 2, Kepad 3 = Area Arm Suite 3 etc. Whe a User code is etered at a kepad, oe of the Area Arm Suites is selected (depedig o which kepad was used) ad the areas cotaied withi that suite arm usig the armig mode for that suite, the kepad souder will also follow the areas defied b the suite. 80 INS176-15

81 Premier Elite Series Istallatio Maual Expader Setup 5.5 Expader Setup E o elec: Epade ep Ep eas: 3 Ep eas: R Ep eas: < 2 Ep eas: < Ep e: R ^Edi e I ecepio Edi e ^ Ep I/ o Used R Ep I/ o Used Ep I/ ilia ape Ep ole: ole = 4 R Ep ole: ole =4 Ep ole: ole = Ep ods: E ie oes E E oes E E oes E eas E eas EH< A CP A A E eas IJK INS

82 Expader Setup Expader Areas Expaders ca be assiged to a umber of areas, assigig a expader to a area determies: Which areas the speaker output o the expader will geerate toes for i.e. if the expader is assiged to areas A ad C, the speaker will ol operate whe areas A or C are i alarm, etr, exit etc. Which areas will cause a Tamper alarm whe the expader cover is removed Expader Locatio Text Each expader ca be assiged up to 16 characters of text. This text ca be used to describe where the expader is located withi the buildig. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press the ke to move the cursor alog). Expader Auxiliar Iput Each expader has a iput that ca be programmed for oe of the followig optios. If ot beig used, the iput must be programmed as Not Used (Default = Not Used). Not Used Never moitored b the sstem. Auxiliar Tamper Normall used for moitorig the box tamper of auxiliar devices such as power supplies etc (remove 0V for Tamper alarm). Bell Tamper Normall used for moitorig Bell Tamper returs (remove 0V for Tamper alarm). Remote Reset Normall used to reset the sstem/area followig a Itruder alarm (the area must also be programmed for Ati-code reset) see page 65 for details (appl 0V to reset). Lie Fault +ve Normall used to idicate a telephoe lie fault (remove 0V for Lie Fault). Lie Fault -ve Normall used to idicate a telephoe lie fault (appl 0V for Lie Fault). Silece Souders Normall used to silece the Iteral souders followig a Itruder alarm ad would be used i cojuctio with Audio Verificatio uits (appl 0V to silece). Global Omit Ke Normall wired to a ke switch. Whe the ke switch is activated, all zoes (with the Omit attribute) assiged to the same area as the expader, will be omitted (0V removed for omit). Local Omit Ke Normall wired to a ke switch. Whe the ke switch is activated, all zoes (with the Omit attribute) wired to the expader, will be omitted (0V removed for omit). PSU Moitor Normall used to moitor a Power Suppl for faults, see page 36 for wirig details. Defer Auto Armig Normall used to defer the automatic armig of a area (appl 0V to defer). Expader Speaker Volume Premier Elite Series Istallatio Maual This optio cotrols the volume level of advisor toes from loudspeakers coected to the expaders. Advisor toes cosist of Etr/Exit ad Warig tpe toes. 1 = miimum; 8 = maximum. Alarm toes are alwas full volume. Expader Souder Optios The speaker output o the expader ca be programmed so that certai tpes of toes are ot geerated. Whe deselected, Fire, Alarms, Fault, Service, Etr, Exit ad Chime toes will ot be heard. Select toes b pressig kes 1 to 8 (a letter o the displa meas the toe is selected, a Dot o the displa meas the toe is ot selected). F - Fire Toes O Fire alarm toes will be geerated b the expader souder/speaker. A - Alarm Toes O Itruder alarm, Tamper alarm ad PA alarm toes will be geerated b the expader speaker. F - Fault Toes O Fault toes will be geerated b the expader speaker. S - Service Toe O Service ad Warig toes will be geerated b the expader speaker. E - Etr Toes O Etr toes will be geerated b the expader speaker. X - Exit Toes O Exit toes will be geerated b the expader speaker. C - Chime Toes O Chime 1, 2 ad 3 toes will be geerated b the expader speaker. 82 INS176-15

83 Premier Elite Series Istallatio Maual Sstem Outputs 5.6 Sstem Outputs E o elec: se ps se ps ael ps 1 se ps igi ps igi p o Used (o) 3 igi p 3 o Used (o) igi p 3 o Used ea:4 EHIJK ea:4 EH< A ea:4 IJK CP 0 igi p 3 o Used 1 igi p se pe se op3 se pe 2 igi p 3 ea pe ea:< ie la ea: ie la 3 igi p 3 Zoe pe igi p 3 Zoe<iic igi p 3 Zoeala 4 igi p 3 Use pe igi p 3 <ode Eeed 5 igi p 3 ool ie igi p 3 ool ie 7< 6 igi p 3 ool igi p 3 ool 4< 7 igi p 3 oo ool igi p 3 oo ool4 igi p 3 se pe igi / 3 : Use es Ieed Ieed I p 3 Hose Ui p 3 p 3 Hose Ui Hose Ui p 3 Hose Ui4 p 3 ^Edi e I ecepio Edi e ^ INS

84 Sstem Outputs Premier Elite Series Istallatio Maual Available Outputs Various sets of programmable outputs ca be foud o the cotrol pael, kepads, expaders ad output modules. Pael Outputs Pael outputs 1-5 are located o the top right had corer of the cotrol pael ad ca be programmed to a of the output tpes listed (see page 35 for wirig details). Digi Outputs Digi outputs 1-8 are located o the left had side of the cotrol pael ad ca be programmed to a of the output tpes listed (see page 35 for wirig details). Digi Chaels Digi chaels 1-16 are for the Com300 ad Com2400 plug-o commuicators ad ca be programmed to a of the output tpes listed. RedCARE/Rela Pis RedCARE or Rela Pis 1-8 are for a plug o RedCARE or RM8 Rela module ad ca be programmed to a of the output tpes listed. Kepad Outputs Kepad outputs are for the outputs o the remote kepads (see page 23 for details) ad ca be programmed to a of the output tpes listed. Wire as per Pael Outputs show o page 35. Expader Outputs Expader outputs are for the outputs o the zoe/output expaders (see page 24 for details) ad ca be programmed to a of the output tpes listed. Wire as per Pael Outputs show o page 35. Custom Outputs Custom outputs are NOT phsical outputs the are Software outputs that ca be cofigured to operate uder certai coditios (see page 89 for details). Oce cofigured these outputs ca the be assiged to a phsical output (see sstem outputs 22-27). X-10 Outputs X-10 outputs are NOT phsical outputs the are Software outputs that ca be cofigured to operate devices that are coected to a X- 10 cotroller. These outputs ca also be assiged a house ad uit umber alog with descriptive text. (see page 89 for details). Programmig Outputs Whe programmig outputs, select a output group ad a output tpe from that group s list (each output group has its ow output tpes) the select attributes (if required). Output Group + Output Tpe + Output Attributes = Output Programmed. Output Group - Not Used Ol the followig output tpe is available: Not Used (off) This output tpe ever activates. Output Group - Sstem Select a output tpe from the followig optios: 00 - ATS Path Fault This output tpe activates whe a fault is detected with the Alarm Trasmissio Sstem ad deactivates whe the fault is cleared Mais Power Off This output tpe activates whe o AC Mais is detected o the cotrol pael ad deactivates whe mais is detected Aux Fuse Blow This output tpe activates whe the Auxiliar fuse (F1) fails ad deactivates whe the sstem is reset Bell Tamper This output tpe activates whe the cotrol pael Bell tamper or a expader iput (programmed as Bell tamper) is activated, causig a Tamper alarm o the sstem, ad deactivates whe the Tamper alarm is reset Auxiliar Tamper This output tpe activates whe the cotrol pael Aux tamper or a expader iput (programmed as Auxiliar tamper) is activated, causig a Tamper alarm o the sstem, ad deactivates whe the Tamper alarm is reset Pael Lid Tamper This output tpe activates wheever the pael cover is removed, causig a Tamper alarm o the sstem, ad deactivates whe the Tamper alarm is reset Egieer Workig This output tpe activates wheever a Egieer code is etered to access the programmig meu ad deactivates whe the egieer logs off Cofirm Devices This output tpe activates whe the cotrol pael requires devices to be cofirmed ad deactivates whe the devices are cofirmed (see page 133 for details) Service Required This output tpe activates whe the Service Iterval timer expires ad deactivates whe a Egieer code is etered (see page 69 for details) Bell Fuse Blow This output tpe activates whe the cotrol pael bell fuse (F4) fails ad deactivates whe the sstem is reset Batter Fault This output tpe activates whe the sstem detects a fault with the stadb batter, ad deactivates whe the fault clears Batter Test O This output tpe activates whe the Batter Test starts, ad deactivates whe the test expires (see page 69 for details) Courtes Light This output tpe activates whe the Courtes timer starts, ad deactivates whe the timer expires (see page 69 for details) Sstem Ope This output tpe activates whe all areas are uarmed, ad deactivates whe a area is armed Full Arm This output tpe activates whe the sstem is full armed ad deactivates whe the sstem is disarmed Digi Failed This output tpe activates whe the plug-o commuicator fails to report to the Alarm Receivig Cetre (after 3 diallig attempts), ad deactivates the ext time the commuicator successfull reports to the Alarm Receivig Cetre Digi Successful This output tpe activates whe the plug-o commuicator successfull reports to the Alarm Receivig Cetre ad deactivates the ext time the commuicator is triggered Digi Active This output tpe activates whe the plug-o commuicator is triggered ad deactivates whe the commuicator shuts dow. 84 INS176-15

85 Premier Elite Series Istallatio Maual 18 - UDL Lockout This output tpe activates whe a attempt is made to upload/dowload with icorrect site details more tha three times ad deactivates after 4 hours or after a valid User code is etered UDL Call Active This output tpe activates whe a upload/dowload is started ad deactivates whe the upload/dowload fiishes UDL Eabled This output tpe activates whe Eable UDL/Egieer is eabled ad deactivates whe Eable UDL/Egieer is disabled (see page 126 for details) Cofirmed Alarm If the sstem is alread i alarm, this output tpe activates whe a differet zoe (ot o the etr route) is activated ad deactivates at the ed of the Cofirmatio time, whe a code is etered withi the Abort time or whe the alarm is reset Custom1 Stage A This output tpe operates whe Custom Output 1 Stage A activates ad deactivates whe Custom Output 1 Stage A deactivates Custom1 Stage B This output tpe operates whe Custom Output 1 Stage B activates ad deactivates whe Custom Output 1 Stage B deactivates Custom1 Stage AB This output tpe operates whe Custom Output 1 Stage A or B activates ad deactivates whe Custom Output 1 Stage A deactivates Custom2 Stage A This output tpe operates whe Custom Output 2 Stage A activates ad deactivates whe Custom Output 2 Stage A deactivates Custom2 Stage B This output tpe operates whe Custom Output 2 Stage B activates ad deactivates whe Custom Output 2 Stage B deactivates Custom2 Stage AB This output tpe operates whe Custom Output 2 Stage A or B activates ad deactivates whe Custom Output 2 Stage A deactivates Radio-Pad Failed This output tpe activates whe the radio pad fails to commuicate with the Alarm Receivig Cetre ad deactivates whe the radio pad successfull commuicates Radio Successful This output tpe activates whe the radio pad successfull commuicates with the Alarm Receivig Cetre ad deactivates whe the radio pad fails to successfull commuicate No Radio Sigal This output tpe activates whe the Radio-Pads forward sigal is lost ad deactivates whe the sigal is regaied Radio-Pad Lost This output tpe activates whe the Radio-Pad stops commuicatig with its base statio or the cotrol pael ad deactivates whe commuicatio starts agai. 32 Custom3 Stage A This output tpe operates whe Custom Output 3 Stage A activates ad deactivates whe Custom Output 3 Stage A deactivates Custom3 Stage B This output tpe operates whe Custom Output 3 Stage B activates ad deactivates whe Custom Output 3 Stage B deactivates Custom3 Stage AB This output tpe operates whe Custom Output 3 Stage A or B activates ad deactivates whe Custom Output 3 Stage A deactivates Custom4 Stage A This output tpe operates whe Custom Output 4 Stage A activates ad deactivates whe Custom Output 4 Stage A deactivates Custom4 Stage B This output tpe operates whe Custom Output 4 Stage B activates ad deactivates whe Custom Output 4 Stage B deactivates. Sstem Outputs 37 - Custom4 Stage AB This output tpe operates whe Custom Output 4 Stage A or B activates ad deactivates whe Custom Output 4 Stage A deactivates Com 1 Fault This output tpe activates whe whatever is coected to Com Port 1 stops commuicatig with the cotrol pael ad deactivates whe commuicatio starts agai Com 2 Fault This output tpe activates whe whatever is coected to Com Port 2 stops commuicatig with the cotrol pael ad deactivates whe commuicatio starts agai Com 3 Fault This output tpe activates whe whatever is coected to Com Port 3 stops commuicatig with the cotrol pael ad deactivates whe commuicatio starts agai Com 1 No Sigal This output tpe activates whe whatever is coected to Com Port 1 loses its sigal ad deactivates whe its sigal is regaied Com 2 No Sigal This output tpe activates whe whatever is coected to Com Port 2 loses its sigal ad deactivates whe its sigal is regaied Com 3 No Sigal This output tpe activates whe whatever is coected to Com Port 3 loses its sigal ad deactivates whe its sigal is regaied Coms Fault This output tpe activates wheever a tpe of commuicatio fault occurs i.e. No Sigal, Com Port Fault, lie fault etc. ad deactivates whe commuicatio starts agai Radio Jammig This output tpe activates wheever the wireless radio receiver detects a jammig sigal ad deactivates whe the jammig sigal is removed Radio RX Tamper This output tpe activates whe the wireless radio receiver lid is removed, causig a Tamper alarm o the sstem, ad deactivates whe the Tamper alarm is reset Detector Test This output tpe is activated via Witex to iitiate a diagostics check o a PD6662: 2004/EN Grade 3 detector ad deactivates after 10 secods ATS Remote Test This output tpe coforms to the BSIA Form 175 Specificatio. Whe a Lie Fault is ot preset it ca be activated remotel b Witex, or b usig the Test Call Timer or Start Test Call optio o the cotrol pael to iitiate a test o ATE equipmet that have a ATS test iput. NOTE: Ol the RedCare Lie Fault ad Cotrol pael Lie Fault iputs ca be used with the output tpe No ATS Available This output tpe activates whe o Alarm Trasmissio paths are available ad deactivates whe the fault is cleared CIE Fault This output tpe activates whe a fault occurs o the CIE ad deactivates whe the fault is cleared PSU Fuse Blow This output tpe activates whe the Auxiliar iput tpe PSU Moitor detects a 12V failure ad deactivates whe the fault is reset PSU Batter Flt This output tpe activates whe the Auxiliar iput tpe PSU Moitor detects a batter fault ad deactivates whe the fault is reset. 53 WD Test Active This output is activated via remote maiteace software to iitiate a diagostics check o a exteral souder with remote test capabilit ad will deactivate after 1 miute. 54 PSU Mais Fault This output is activated whe a PSU mais fault is detected. 55 Com 1 Power O Reserved for future use. INS

86 Sstem Outputs 56 Com 2 Power O Reserved for future use. 57 Com 3 Power O Reserved for future use. 58 IP Path Fault Active whe the sstem has reported a IP path fault. 59 Low Fob Batter Active whe the fob has reported a low batter. 60 PS Failure Active whe the power suppl has reported a PS fault. 61 Charger Fault Active whe the batter charge curret has failed. 62 ComGSM Tamper. Active whe the ComGSM is i tamper. 63 Aux Fault. This output will be active if Global Cofig optio 54 (see page Error! Bookmark ot defied.) Auxiliar Iput = Fault is ON 64 Poll Timer. This output is liked to the "Poll IP Ever" timer foud i Global Optios/Timers. If the "Poll IP Ever" timer is set for a o zero value, this output will activate for 10 secods ad the reset. The ccle will repeat ever time the timer expires. If multiple com ports are cofigured as "ComIP" the timer ad output will follow ever com port. It will activate for 10s ever time a ComIP polls. Output Group - Area A umber of areas ca be assiged to each output tpe. Select a output tpe from the followig optios: 00 - Alarm This output tpe activates whe a tpe of Itruder alarm occurs i the selected area, ad deactivates whe the Itruder alarm is reset Guard Alarm This output tpe activates whe a zoe programmed as Guard causes a Itruder alarm i the selected area ad deactivates whe the alarm is reset Guard Access Alarm This output tpe activates whe a zoe programmed as Guard Access causes a Itruder alarm i the selected area ad deactivates whe the alarm is reset Etr Alarm This output tpe activates whe a zoe programmed as Etr/Exit 1 or 2 causes a Itruder alarm i the selected area ad deactivates whe the alarm is reset Cofirmed Itruder If a area is alread i alarm, this output tpe activates whe a differet zoe (ot o the etr route) is activated i the selected area ad deactivates at the ed of the Cofirmatio time, whe a code is etered withi the Abort time or whe the alarm is reset Hr Audible This output tpe activates whe a zoe programmed as 24Hr Audible causes a Iteral alarm or Itruder alarm i the selected area ad deactivates whe the alarm is reset Hr Silet This output tpe activates whe a zoe programmed as 24Hr Silet causes a silet alarm or Itruder alarm i the selected area ad deactivates whe the alarm is reset Hr Gas This output tpe activates whe a zoe programmed as 24Hr Gas causes a Silet alarm or Itruder alarm i the selected area ad deactivates whe the alarm is reset PA Alarm This output tpe activates whe a tpe of PA alarm i.e. PA audible, PA silet or Duress causes a PA alarm i the selected area ad deactivates whe the alarm is reset. Premier Elite Series Istallatio Maual 09 - PA Silet This output tpe activates whe a zoe programmed as PA Silet or a kepad PA (1 & 3) causes a silet PA alarm i the selected area ad deactivates whe the alarm is reset Duress This output tpe activates whe a User code with the Duress attribute causes a silet PA alarm i the selected area ad deactivates whe the alarm is reset Fire Alarm This output tpe activates whe a zoe programmed as Fire or a kepad Fire (4 & 6) causes a Fire alarm i the selected area ad deactivates whe the alarm is reset Medical This output tpe activates whe a zoe programmed as Medical or a kepad Medical (7 & 9) causes a Medical alarm i the selected area ad deactivates whe the alarm is reset Auxiliar Alarm This output tpe activates whe a zoe programmed as Auxiliar causes a Silet alarm i the selected area ad deactivates whe the alarm is reset Tamper Alarm This output tpe activates whe a tpe of Tamper alarm occurs i the selected area ad deactivates whe the alarm is reset Alarm Abort If the selected area is i alarm, this output tpe activates whe a User code is etered to cacel the alarm i the selected area ad deactivates after 10 secods Read This output tpe activates whe all zoes i the selected area are secure ad deactivates whe a zoe i the selected area is activated Etr Mode This output tpe activates whe the selected area is i the etr mode ad deactivates whe the area is ot i the etr mode d Etr Mode This output tpe activates whe the 2 d etr timer for the selected area starts ad deactivates whe the 2 d etr timer expires Exit Mode This output tpe activates whe the selected area is i the exit mode ad deactivates whe the area is ot i the exit mode Etr/Exit Mode This output tpe activates whe the selected area is i the etr or exit mode ad deactivates whe the area is o loger i the etr or exit mode Armed This output tpe activates whe the selected area is armed ad deactivates whe the selected area is disarmed Full Armed This output tpe activates whe the selected area is full armed ad deactivates whe the selected area is disarmed Part Armed This output tpe activates whe the selected area is part armed ad deactivates whe the selected area is disarmed Part Armig This output tpe activates whe the selected area is part armig ad deactivates whe the selected area arms Force Armable This output tpe activates whe the selected area has at least oe zoe with the Force Omit attribute, ad the area is able to be force armed. It will deactivate whe the area caot be force armed Force Armed This output tpe activates whe the selected area is forced to arm with zoes active, ad deactivates whe all zoes are reistated Arm Failed This output tpe activates whe the selected area fails to arm because a zoe is i fault, ad deactivates whe a valid User code is etered. 86 INS176-15

87 Premier Elite Series Istallatio Maual 28 - Bell SAB This output tpe activates whe a Exteral alarm occurs i the selected area, ad deactivates whe area is disarmed or the Bell Duratio timer expires Bell SCB This output tpe deactivates whe a Exteral alarm occurs i the selected area, ad activates whe area is disarmed or the Bell Duratio timer expires Strobe This output tpe activates whe a Exteral alarm (or Arm Fail) occurs i the selected area, ad deactivates whe area is disarmed (or a valid User code is etered) Detector Latch This output tpe activates for 5 secods whe the selected area is i the exit mode the activates agai whe the area arms ad deactivates whe a Itruder alarm occurs or the selected area is disarmed Detector Reset This output tpe is ormall active, ad deactivates for 5 secods whe the selected area is i the exit mode Walk Test Active This output tpe activates whe the Walk Test procedure is selected, ad deactivates whe the Walk Test procedure is cacelled Zoes Omitted This output tpe activates whe a zoe i the selected area with the Omit attribute, is omitted b the user, ad deactivates whe the zoe is reistated Hr Zoes Omit This output tpe activates whe a zoe programmed as 24Hr Audible or 24Hr Silet (with the Omit attribute) is omitted b the user, ad deactivates whe the zoe is reistated Reset Required This output tpe activates whe the selected area requires a reset followig a alarm, ad deactivates whe the alarm is reset Door Strike This output tpe activates for the 4 secods whe a User code with the Door Strike attribute is etered for the selected area Chime Mimic This output tpe activates for 2 secods whe a zoe i the selected area with the Chime attribute is activated Chime Eabled This output tpe activates whe Chime is eabled for the selected area, ad deactivates whe Chime is disabled for the selected area DK First Kock This output tpe activates whe a zoe i the selected area with the Double Kock attribute is activated for the first time, ad deactivates whe the zoe causes a alarm or the Double Kock Dela timer expires BP First Kock This output tpe activates whe a zoe i the selected area with the Beam Pair attribute is activated for the first time ad deactivates whe aother zoe with the Beam Pair attribute, causes a alarm or the Beam Pair Time expires O Test This output tpe activates whe a zoe i the selected area with the Test attribute is placed o test ad deactivates whe the Soak Test Time expires Test Fail This output tpe activates whe a zoe i the selected area with the Test attribute is placed o test (ad fails) ad deactivates whe a Egieer code is etered or the Soak Test Time expires Iteral Alarm This output tpe activates whe a Iteral alarm occurs i the selected area, ad deactivates whe the alarm is cacelled Auto Armig This output tpe activates whe the selected area Auto Arms, ad deactivates whe the selected area is disarmed. Sstem Outputs 46 - Time Armig This output tpe activates for 5 miutes prior to the selected area beig armed usig the Cotrol Timers st Code Etered This output tpe activates for 30 secods whe a User code with the Dual Code attribute is etered for the selected area d Code Etered This output tpe activates for 30 secods whe two User codes with the Dual Code attribute are etered for the selected area Area Secured This output tpe activates wheever a Securit Ke zoe tpe is used to lock kepads out ad deactivates whe the kepads are ulocked agai Part Armed 1 This output tpe activates whe a Part Arm 1 is selected for the selected area ad deactivates whe part arm 1 is disarmed Part Armed 2 This output tpe activates whe a Part Arm 2 is selected for the selected area ad deactivates whe part arm 2 is disarmed Part Armed 3 This output tpe activates whe a Part Arm 3 is selected for the selected area ad deactivates whe part arm 3 is disarmed Custom Alarm This output tpe activates whe a Custom zoe tpe causes a alarm i the selected area ad deactivates whe a valid user code is etered Zoe Warig This output tpe activates whe Custom zoe tpe i the selected area with the Warig Req attribute (see page 59 for details) is activated for the duratio of the Warig Dela timer (see page 70 for details) ad deactivates whe the zoe activit is cleared Arm Fail Warig This output tpe activates whe the selected area fails to arm after a period of time (cotrolled b the area exit time) whe usig Etr/Exit or Exit Term. armig ad deactivates whe the area arms Forced Etr This output tpe activates for the duratio of the Forced Etr timer (see page 70 for details) whe a Guard or Custom zoe with the Guard attribute is activated (see page 58 for details), Zoes Locked Out This output tpe activates whe a zoe is locked out followig a Itruder Alarm activatio ad deactivates whe all zoes are clear ad reistated All Areas Armed This output tpe activates whe all of the selected areas are armed ad deactivates whe a oe of those areas is disarmed Time Arm Disabled This output tpe activates whe the timed armig procedure is disabled (see page 59 for details) ad deactivates whe timed armig is reistated Armed/Alarm This output tpe activates whe the selected area is armed ad deactivates whe the selected area is disarmed This output tpe also pulses whe a Itruder alarm occurs i the selected area, ad deactivates whe the selected area is disarmed Itruder Alarm This output tpe activates whe a Itruder alarm occurs, ad deactivates whe the Itruder alarm is cacelled. Tamper alarms will ot activate this output 62 - Speaker Mimic This output tpe activates wheever the iteral speaker output is o, ad deactivates whe the speaker output is off Full Armed/Exit This output tpe activates whe the selected area is i the full arm exit mode ad the arms ad deactivates whe the area is disarmed. INS

88 Sstem Outputs 64 - Detector Fault This output tpe activates whe a detector fault occurs ad deactivates whe the fault is reset Detector Masked This output tpe activates whe a detector mask occurs ad deactivates whe the mask is reset Fault Preset This output tpe activates whe a geeral fault occurs i.e. Lie Fault, AC Mais Fail, Detector Fault etc. ad deactivates whe the fault is cleared LED Cotrol This output tpe is alwas activate ad deactivates whe a User or Egieers code is etered to gai access to a meu. The output activates agai 30 secods after the user/egieer exits the meu. This output tpe is for use with detectors that require 0V applied to disable their LED s Full Arm Etr This output tpe activates whe the etr mode is started ad deactivates whe the etr mode fiishes wheever the sstem i Full Armed. 69 Fire Souder This output tpe activates whe a Zoe programmed as Fire, or a Kepad Fire (4&6) causes a Fire Alarm i the selected area ad deactivates whe the alarm is reset. 70 Cofirmed PA If a area is i PA alarm this output tpe activates whe oe of the followig happes. aother PA zoe is activated A tamper is detected from a differet device A secod sigal from a multi actio PA A global tamper withi the timer period 71 Cofirmed Alarm If a area is i Alarm, this output tpe activates whe a differet zoe (ot the etr route) is activated i the same area. This output tpe deactivates at the ed of the cofirmatio time whe a valid code is etered withi the Abort time, or whe the alarm is reset. 72 Seismic Alarm* *Reserved for future use Output Group - Zoe A zoe ca be assiged to this output tpe. Select a zoe umber.the select a output tpe from the followig optios: Mimic This output tpe activates whe the selected zoe is activated ad deactivates whe the zoe is secure. This output will work if the zoe is armed or disarmed. MimicArm This output tpe activates whe the selected zoe is activated ad deactivates whe the zoe is secured. This output will ol work if the zoe is armed. Alarm This output tpe activates whe the selected zoe causes a alarm ad deactivates whe the alarm is reset. This output will ol work if the zoe is armed. Tamper This output tpe activates whe the selected zoe causes a Tamper alarm ad deactivates whe the tamper is reset. This output will work if the zoe is armed or disarmed. MimicLat This output tpe activates whe the selected zoe is activated ad deactivates whe the ext time the zoe is activated. This output will work if the zoe is armed or disarmed. Premier Elite Series Istallatio Maual Omitted This output tpe activates whe the selected zoe is omitted ad deactivates whe the zoe is reistated. Output Group - User Code Etered A user ca be assiged to this output tpe. This output tpe activates for 5 secods whe the selected User code is etered. Output Group - Cotrol Timer Select a Cotrol Timer. These output tpes activate whe the respective cotrol timer turs o ad deactivate whe the timer turs off. Output Group - PC Cotrol Select a PC Cotrol. These output tpes ca be activated ad deactivated usig a PC ruig the Witex UDL software. Output Group - Door Cotrol Select a Door Cotrol from 1,1 to 1,4 (48), 1,1 to 1,8 (88), 1,1 to 2,8 (168) 1,1 to 8-8 (640). These output tpes activate for the duratio of the Door Strike timer whe a valid User code (assiged to the same door) is etered ad deactivates whe the timer expires. These output tpes are used i cojuctio with the Door Cotrol User optio (see page 127 for details). Output Attributes Assigig a attribute to a output will alter how the output works. The followig attributes ca be assiged to a of the various tpes listed. Select attributes b pressig kes 1 to 8 (a letter o the displa meas the attribute is selected, a Dot o the displa meas the attribute is ot selected). U - User Test The output will activate whe a user performs a User test (see page 133 for details). I - Iverted The output is iverted (a output that applies 0V whe active will become a output that applies 12V whe active). L - Latchig Whe activated, the output will remai o util a valid User code is etered followed b reset. 1 - Use Pulse Period 1 Whe activated, the output will remai o for the duratio of the Pulse Period 1 timer (see page 69 for details). 2 - Use Pulse Period 2 Whe activated, the output will remai o for the duratio of the Pulse Period 2 timer (see page 69 for details). 3 - Use Pulse Period 3 Whe activated, the output will remai o for the duratio of the Pulse Period 3 timer (see page 69 for details). C - Ol Active With Custom Output 1 Stage A The output will ol operate whilst Custom Output Stage A is O (see page Custom Outputs for details). R - Radom The output will activate radoml. A miimum ad maximum O time ca also be programmed (see page 69 for details). 88 INS176-15

89 Premier Elite Series Istallatio Maual Sstem Outputs X-10 Outputs X-10 Outputs are outputs that ca be cofigured to operate devices that are coected to a X-10 cotroller. These outputs ca be assiged a house ad uit umber. To Program a output for X-10, proceed as follows: Program the output tpe to esure correct operatio whe the programmed coditio occurs i.e. a output programmed as Etr/Exit will activate whe the selected area is i the etr or exit mode ad deactivate whe the area is o loger i the etr or exit mode. Assig a attributes i.e. Pulsed 1 would cause the output to be timed for the duratio of the Pulse 1 timer. Assig a House ad Uit umber i.e. this is the phsical address of the X-10 Uit ad esures that the correct uit i the correct area operates whe the output coditio is met i.e the correct uit switches o ad off durig Etr/Exit. Zoe Group Outputs Zoe Group Outputs will activate whe oe or more zoes o the cotrol pael are assiged to a Zoe Group. Zoe Group Mimic This output tpe will become active whe a zoe assiged to the group goes active or chages state. Zoe Group Armed This output tpe will become active whe a zoe assiged to the group goes active whe the area the zoes is assiged too is armed. Custom Outputs Custom outputs are NOT phsical outputs the are Software outputs that ca be cofigured to operate uder certai coditios. Oce cofigured these outputs ca the be assiged to a phsical output (see sstem outputs ad 32-37, page 85 for details). Custom Output 1-4, Stage A Will activate whe switches 1 or 2 ad 3 ad 4 are active. Custom Output 1-4, Stage B Will activate whe switches 5 or 6 ad 7 ad 8 are active. UCustom Output 1-4, Stage AB Will activate whe switches 1 or 2 ad 3 ad 4 are active OR switches 5 or 6 ad 7 ad 8 are active A 5 AB B Example Switch 1 is programmed as: Zoe 1 Mimic Switch 2 is programmed as: Zoe 2 Mimic Switch 3 is programmed as: Armed Switch 4 is programmed as: Never Active (ad iverted) Custom Output 1 Stage A will ol activate whe switches 1 OR 2 AND 3 AND 4 are closed. i.e. if ZONE 1 or ZONE 2 ACTIVATES whilst the sstem is ARMED (switch 4 is alwas closed). Assig up to 16 Characters of text to each uit to allow eas idetificatio whe the output eeds to be mauall triggered directl from the kepad usig the N9 commad i.e. Etrace Light. INS

90 UDL & Digi Optios Premier Elite Series Istallatio Maual s 5.7 UDL/Digi Optios Reset Digi E o elec: U/igi pios U/igi pios ese igi This optio should be used wheever a plug-o commuicator is plugged o or removed from the cotrol pael. Start Test Call E o elec: U/igi pios U/igi pios ese igi 1 U/igi pios a es all o es all = all = o 3 0 o3 is Idle ai ial oe Whe a plug-o commuicator has bee fitted to the cotrol pael. This optio ca be used to sed a test call to the Alarm Receivig Cetre or to iitiate a remote Upload/Dowload call to oe of the programmed call-back umbers. MSN/Pre-Dial No. E o elec: U/igi pios ^ 44# ^ U/igi pios ese igi 2 U/igi pios /eial o 3 3 Whe a ComISDN is coected to a extesio of a ISDN lie with more tha 1 umber, the direct dial umber should be programmed i here, this esures that the ComISDN will ol aswer a call whe the direct dial umber is dialled. This umber ca be up to 24 digits. The Use MSN/Pre-Dial optio must also be eabled (see page 95 for details). Whe eterig the telephoe umber the followig extra kes ca be used: ai ial oe iallig o iallig o ooig s H/ ooig s H/ edig aa edig aa ai lea ela ai lea ela o3 is Idle N 90 INS176-15

91 Premier Elite Series Istallatio Maual UDL & Digi Optios Program Digi E o elec: U/igi pios U/igi pios ese igi 3 U/igi pios oga igi oocol: isaled 2 oocol: isaled isaled oocol: 2 oocol: as oa ia o: ^ ^ 3 ecoda o: ^ ^ 3 cco e: ^ 3 cco e: 34 iallig eps iallig eps 3 iallig eps 3 INS

92 UDL & Digi Optios Premier Elite Series Istallatio Maual epoig o: epoig o: 23 epoig o: 3 esoig o: esoig o: 23 esoig o: 3 pe/close o: pe/close o: 23 pe/lose o: 3 oig: Use ea cc Use ea cc 92 INS176-15

93 Premier Elite Series Istallatio Maual UDL & Digi Optios epo eas : epo eas : < 1 epo eas : < epos: ioi l oal la oal la oig: Use ea cc Use I I Use I I epo eas : EHIJK epo eas : EH< JK CP A epo eas : EHJK INS

94 UDL & Digi Optios The plug-o commuicator ca be programmed to dial up to 3 sets of Alarm Receivig Cetre (ARC) iformatio. Each Set cosists of the followig optios: Protocol This is the reportig protocol that is used to commuicate with the Alarm Receivig Cetre. The followig protocols are supported: Fast Format: The pael will report usig Fast Format. If this optio is selected the Reportig Chaels must be programmed (see below) Cotact ID: The pael will report usig Cotact ID. If this optio is selected, the Reportig Areas must be programmed (see below) SIA Level II: The pael will report usig SIA Level II EasCom Pager: The pael will report to a EasCom tpe pager SMS Messagig: The pael will sed Short Message Service (SMS) text messages to a mobile phoe Speech Module: The pael will use the speech module ad pla recorded voice messages to the programmed umbers. Texecom Coect: The pael will be compatible with the Texecom Coect app. The SmartCom IP should be programmed before the Coect protocol is eabled. Whe selected for a ARC several other chages will be made to the pael. o Primar & Secodar IP addresses ad Port Numbers will be programmed for the Coect servers. Port umbers are assiged based o Coutr Code to eable additioal features such as local Time schroisatio. o Dial attempts will be set at 9 o o o o o o Coect Via IP will be eabled The comport that a ComIP or ComWiFi is coected to, programmed ad eabled will be selected. Add Push Message will be eabled Reportig optios will be eabled ad selected. (these ma be altered, however Priorit Alarms, Alarms ad Ope/Close MUST be selected to allow the app to correctl fuctio.) All areas will be selected for Reportig The Poll IP ever Timer will be set to 15 Miutes. Primar Telephoe Number This is the first telephoe umber that the commuicator will dial for the Alarm Receivig Cetre or the first mobile telephoe umber to sed SMS to. Each telephoe umber ca be up to 24 digits. Secodar Telephoe Number This is the secod telephoe umber that the commuicator will dial for the Alarm Receivig Cetre or the secod mobile telephoe umber to sed SMS to. Each telephoe umber ca be up to 24 digits. Accout Number This is the accout umber that will be reported to the Alarm Receivig Cetre. Each accout umber ca be up to 6 digits. (Not Required for Texecom Coect) Each area ca also have its ow accout umber (see page 96 & 81 for details). Diallig Attempts This is the umber of times the commuicator will tr to dial the Alarm Receivig Cetre or Pager telephoe umber. The umber of diallig attempts is limited to 9. If this value is set to 0, the commuicator will ever dial out. Premier Elite Series Istallatio Maual The followig optio is ol displaed if the Fast Format protocol is selected 2B2B2BReportig o This optio defies which chaels report to the selected Alarm Receivig Cetre. 3B3B3BRestorig o This optio defies which chaels report a restore to the selected Alarm Receivig Cetre. 4B4B4BOpe/Close o This optio defies which chaels report Ope/Close to the selected Alarm Receivig Cetre. The followig optio is ol displaed if Cotact ID or SIA Level II protocols are selected 5B5B5BReportig Areas This optio defies which areas report evets to the selected Alarm Receivig Cetre. The followig optio is ol displaed if Cotact ID, SIA Level II or EasCom Pager protocols are selected 6B6B6BReports This optio defies which evets report to the Alarm Receivig Cetre whe usig Cotact ID or SIA Level II. 7B7B7BP - Priorit Alarm ad Cacel Evets The sstem will report Priorit alarm ad cacel evets to the selected Alarm Receivig Cetre. 8B8B8BA - Normal Alarm ad Cacel Evets The sstem will report alarm ad cacel evets to the selected Alarm Receivig Cetre. 9B9B9BO - Ope ad Close Evets The sstem will report ope ad close evets to the selected Alarm Receivig Cetre. 01B01B01B - Omit ad Reistate Evets The sstem will report omit ad reistate evets to the selected Alarm Receivig Cetre. 1B1B1BM - Maiteace Alarm Evets The sstem will report maiteace alarm evets to the selected Alarm Receivig Cetre. 21B21B21BT - Tamper Alarm Evets The sstem will report tamper alarm evets to the selected Alarm Receivig Cetre. 31B31B31BC - Test Call Evets The sstem will report test call evets to the selected Alarm Receivig Cetre. 41B41B41BR - Restore Evets The sstem will report restore evets to the selected Alarm Receivig Cetre. Protocol Optios Not available if EasCom Pager is selected Cofig. This optio defies which secodar optios are eabled. 61B61B61BA - Area Accout Evets are reported to the Alarm Receivig Cetre usig the area accout umbers (see page 96 for details). 71B71B71BS - SIA Level I / UCP Evets are reported to the Alarm Receivig Cetre usig SIA Level I or or to a SMS Messagig Server usig UCP. 81B81B81BR - Eable Radio-Pad The sstem will use the Paket radio-pad to report evets to the selected Alarm Receivig Cetre. 94 INS176-15

95 Premier Elite Series Istallatio Maual 91B91B91BG - Eable GSM Module The sstem will use the GSM Module to report evets to the selected Alarm Receivig Cetre. 02B02B02BA - AV Module The AV Module will dial the Alarm Receivig Cetre. 12B12B12BF - Use GSM First The GSM module is the primar path whe this is eabled 2B2B2BI - Coect Via IP The sstem will use the IP Module to report evets to the selected Alarm Receivig Cetre. 32B32B32BT - Sed SIA Text Text is set to the Alarm Receivig Cetre whe usig SIA II (this makes the protocol SIA III) Digi Optios E o elec: U/igi pios U/igi pios ese igi 4 UDL & Digi Optios Did t get the ACK or got icorrect ACK from server. Server did t repl for some reaso. Protocol Optios 2 Not available if EasCom Pager is selected 61B61B61BUse ComPort 1 Comport 1 is assiged to the ARC beig used. Use ComPort 2 Comport 2 is assiged to the ARC beig used.7b17b Use ComPort 3 Comport 3 is assiged to the ARC beig used. Add Push Message Required for Texecom Coect to Fuctio correctl. Automaticall eabled whe Coect Protocol is selected. Eable Texecom Coect App This meu will ONLY be preset whe the Texecom Coect Protocol is selected for a ARC. See previous page for details. Depedig o the coectio speed ou ma or ma ot see some or all of these screes. The App Code scree is the importat oe. The app code geerated should be used immediatel. If ot used it will expire after oe hour. Kepad Scree Explaatio Press Yes at this scree to iitiate the process Displaed if the commuicator is alread bus (olie with some other ARC or i UDL). Stas o this scree util commuicator is read to do this setup call. Check pael ARC cofiguratio. This lie is displaed if there is o ARC cofigured for Texecom Coect. Foud a ARC to do the setup call. The setup call is beig iitialized. Trig to coect to the server IP coectio is established with the server Set all the required details to the server Waitig for server to repl Repl received successfull from server. Access code displaed. U/igi pios igi pios igi pios igi is Ealed lid iallig lid iallig There are 6 optios that cotrol how the plug-o commuicator works. Select optios b pressig kes 1 to 8 (a letter o the displa meas the optio is selected, a Dot o the displa meas the optio is ot selected). E - Digi is Eabled The plug-o commuicator will report all sstem evets to the Alarm Receivig Cetre. P - Pulse Diallig The plug-o commuicator will alwas dial telephoe umbers usig pulse diallig. 3 - Pulse After 3 The plug-o commuicator will alwas dial telephoe umbers usig toe diallig. However, if the Commuicator fails to dial the umber three times i a row, it will revert to pulse diallig for the remaiig attempts. B - Blid Diallig The plug-o commuicator will ot look for a dial toe before diallig a telephoe umber. U - Use MSN/Pre-Dial The ComISDN will ol aswer a call whe the programmed MSN/Pre-Dial telephoe umber is dialled. A - Dial All Numbers If the commuicator is ackowledged b the first ARC, it will cotiue to dial a other programmed ARC. This is ormall used whe a secod or third ARC is programmed with SMS Messagig. This meas the IP coectio is ot available for some reaso (either the local IP etwork is dow or the server is dow etc. ) INS

96 UDL & Digi Optios Area Accouts 12/24/48/64/88/168 Area Accouts 640 Premier Elite Series Istallatio Maual E o elec: U/igi pios U/igi pios ese igi U/igi pios ea ccos ea cco: ea cco: ^ ea cco: 34 Whe usig Fast Format, Cotact ID or SIA, each area ca have its ow accout umber to idetif evets. Accout Numbers A to H (I to P) This is the accout umber that will be reported to the Alarm Receivig Cetre. Each accout umber ca be up to 6 digits. I order for the cotrol pael to use the area accout umbers, the area accout Cofig. optio must be eabled (see page 94 for details). E o elec: U/igi pios U/igi pios ese igi U/igi pios ea ccos ea cco: ea cco: ^ ea cco: 34 Whe usig Fast Format, Cotact ID or SIA, each area ca have its ow accout umber to idetif evets. Accout Numbers A to H (I to P) This is the accout umber that will be reported to the Alarm Receivig Cetre. Each accout umber ca be up to 6 digits. I order for the cotrol pael to use the area accout umbers, the area accout Cofig. optio must be eabled (see page 94 for details). 96 INS176-15

97 Premier Elite Series Istallatio Maual UDL & Digi Optios UDL Optios E o elec: U/igi pios U/igi pios ese igi 5 U/igi pios U pios all ac o ^ ^ 3 all ac o all ac o 3 U assod is: ^Edi e 3 Edi^e 3 U pios eded all eea all eea igs eied: igs eied: 6 igs eied: iallig eps iallig eps 3 iallig eps 3 INS

98 UDL & Digi Optios The sstem has the followig UDL dowload optios: Dowload Call Back Number 1 This is the telephoe umber that is dialled b the modem whe Callback Number 1 is requested b the remote UDL computer. This telephoe umber ca be up to 24 digits. Dowload Call Back Number 2 This is the telephoe umber that is dialled b the modem whe Callback Number 2 is requested b the remote UDL computer. This telephoe umber ca be up to 24 digits. Dowload Call Back Number 3 This is the telephoe umber that is dialled b the modem whe Callback Number 3 is requested b the remote UDL computer. This telephoe umber ca be up to 24 digits. UDL Password is: Whe the remote dowloadig computer dials ito the sstem, the cotrol pael compares the UDL password set b the computer with UDL password stored i the cotrol pael. If the passwords match, access to the cotrol pael is grated, if the do t match, access is deied. If more tha three attempts at reportig are made with a wrog password, the modem will lock out for 4 hours or util a Master User code is etered. The UDL password programmed i this optio must also be programmed i the customer accout o the remote dowloadig computer. This password ca be up to 16 characters (umbers ad letters). If o UDL Password has bee programmed, access to the cotrol pael ca be gaied b usig the egieers code as the UDL Password. A UDL password MUST be programmed whe usig Texecom Coect. UDL Optios There are 6 UDL optios that affect how ad whe access to the cotrol pael via the Witex UDL software is allowed. Select optios b pressig kes 1 to 6 (a letter o the displa meas the optio is selected, a Dot o the displa meas the optio is ot selected). The followig UDL optios are available: A - DL Atteded The sstem will ot allow the remote dowloadig computer access without user authorisatio first. M - Ma Call-Back The sstem will ot use the automatic call back feature. The user must istruct the pael to call back the remote dowloadig computer. The Auto Call-Back feature operates as follows: Premier Elite Series Istallatio Maual D - Call Defeat The modem will aswer icomig calls as follows: The modem must detect oe or more rigs ad the umber of rigs must NOT exceed the value set up i Rigs Required Whe the rigig stops, the pael will start a 30 secod dela timer If the modem detects rigig before the timer expires it will aswer the call immediatel L - Armed DL Limited The pael will ot allow dowload access whe the sstem is armed (also see below). A - A Area Armed The pael will ot allow dowload access whe a areas are armed. K - Olie RKP = Off The cotrol pael caot be accessed usig the O-lie kepad feature of the Witex UDL software. Rigs Required This couter cotrols the umber of rigs the modem eeds to see before it will aswer the call (Default = 003). UDL Dial Attempt If a Call-Back is started, this optio cotrols how ma times the modem will tr to call the remote dowloadig computer before givig up (Default = 003). Eter the umber of diallig attempts. This umber is limited to 9. If this value is set to 0, the commuicator will ever dial out. This ol affects the modem for dowload access ad does ot affect the operatio of the commuicator i a wa. The remote dowloadig computer calls the cotrol pael ad establishes a coectio The UDL password is verified ad the remote dowloadig computer istructs the pael to call it back usig oe of the 3 call back umbers The pael hags up ad dials the requested umber ad reestablishes the coectio with the remote dowloadig computer 98 INS176-15

99 Premier Elite Series Istallatio Maual UDL & Digi Optios Setup Modules E o elec: U/igi pios U/igi pios ese igi 7 U/igi pios ep odles ep adioad? N ad i o ad 3 i o ^ 3 3^ 3 ep odle? o ial eps ial eps N 3^ 3 ep I aa? N es o elec: oi dess ollig ddess o o ^ 3 N 8 ^ 3 ep aa? hio II N ccess ae Use ae assod Ecped os o o Ecped os N Ecpio Ke? N ee i ^ ^ 3 ad eial o: 34 ee ec ode ep g ode peed: 4 ^ ^ ode peed: ^ 3 +H=3 ^3 ode peed: ad U: 347 as all o: aaaaaaa : (=3) :8 (=) : (<=) E:3 (<=) igal: 8 d E: (<4) o o INS

100 UDL & Digi Optios The followig optios are used whe a Paket Radio-Pad is coected to the cotrol pael i order to achieve DUAL SIGNALLING to a Alarm Receivig Cetre, whe a MODEM (Exteral PC or Com2400) is used to coect to the cotrol pael or sed SMS messages to mobile phoes, whe a AV Module is coected to the cotrol pael i order to achieve AUDIO VERIFICATION to a Alarm Receivig Cetre or whe a TCP/IP Module is coected for commuicatios over a Broadbad/ADSL/DSL Lie. Setup Radio-Pad Pad ARC 1 Pri NUA This is the first umber that is used b the Radio-Pad for reportig evets to ARC 1. Pad ARC 1 Sec NUA This is the secod umber that is used b the Radio-Pad for reportig evets to ARC 1. Pad ARC 1 Prefix This umber will prefix the accout umber for ARC 1. Pad ARC 2 Pri NUA This is the first umber that is used b the Radio-Pad for reportig evets to ARC 2. Pad ARC 2 Sec NUA This is the secod umber that is used b the Radio-Pad for reportig evets to ARC 2. Pad ARC 2 Prefix This umber will prefix the accout umber for ARC 2. Pad ARC 3 Pri NUA This is the first umber that is used b the Radio-Pad for reportig evets to ARC 3. Pad ARC 3 Sec NUA This is the secod umber that is used b the Radio-Pad for reportig evets to ARC 3. Pad ARC 3 Prefix This umber will prefix the accout umber for ARC 3. Radio-Pad Attempts This is the umber of times the Radio-Pad will tr to dial the Alarm Receivig Cetre telephoe umber before givig up. The umber of diallig attempts is limited to 9. If this value is set to 0, the Radio-Pad will ever dial out. Setup AV Module AV No. 1> This is the first umber that is dialled b the AV Module. AV No. 3> This is the secod umber that is dialled b the AV Module. AV No. 3> This is the third umber that is dialled b the AV Module. AV Dial Attempts This is how ma times the AV Module will attempt to dial before givig up. The umber of diallig attempts is limited to 9. If this value is set to 0, the AV Module will ever dial out. AV Re-Dial Dela This is the amout of dela that the AV Module uses betwee rediallig telephoe umbers. Setup IP Module ComIP Details Com1, 2 or 3 Select the ComPort ou wish to programme IP details for. ComIP Address This is the IP Address of the IP Module. Must be etered as , use the / ke to isert the. ComIP Port This is the Port umber of the IP Module. Premier Elite Series Istallatio Maual ComIP Gatewa This is the Gatewa IP Address that the IP Module commuicates through. ComIP Mask This is the Subet Mask umber for the IP Module. Pollig/SMG Address This is the IP address of a dedicated Pollig or SMG Server that the IP Module might eed to coect to. Name/SMG Port This is a descriptive ame for the IP Module or SMG Port ad might be used for autheticatio purposes. Chiro Iris GPRS Data Access Pt Name This is the GPRS Access poit Name provided b Chiro User Name This is the APN User Name provided b Chiro Password This is the APN password provided b Chiro. Ecrpted Ports 1, 2 & 3 Each port ca be selected for Ecrptio. All selected ports will use the same Ecrptio Ke. Ecrptio Ke Ecrptio Ke The Ecrptio ke is factor programmed for V4 paels. Paels flashed to V4 must be coected to Witex which will write a ke to the pael. SMS Cetres SMS Cetre Pri. This is the first SMS cetre telephoe umber that is used b for sedig SMS to mobile phoes. (Default = ). SMS Cetre Sec. This is the secod SMS cetre telephoe umber that is used b for sedig SMS to mobile phoes. (Default = ) Modem Modem Setup Stg. If a stadard PC modem is coected to Com1 or Com2, it ma require a cofiguratio strig to make it work properl (please refer to istructio maual of modem beig used for details of required AT commads). The Setup strig is programmed the same wa that TEXT would be programmed ad has a maximum legth of 16 characters. The setup strig does NOT require AT to be etered at the begiig as this is doe automaticall. Modem Speed This optio allows the speed of a stadard PC modem coected to Com1 or Com2 to be adjusted. Radio-Pad Ifo Pad Serial No. This scree displas the Serial umber of the Radio-Pad that is coected. Pad NUA This scree displas the NUA umber of the Radio-Pad that is coected. 100 INS176-15

101 Premier Elite Series Istallatio Maual Last Call From This scree displas the NUA umber of the last Radio-Pad that commuicated with the Radio-Pad that is coected to the cotrol pael. FSS:??? (>=004), Forward Sigal Stregth RSS:??? (>=050), Reverse Sigal Stregth This scree displas the Radio-Pad Forward (FSS) ad Reverse (RSS) Sigal Stregth of the Radio-Pad that is coected to the cotrol pael. The FSS value should be greater tha or equal to 4 ad the RSS value should be greater tha or equal to 50. CRC:??? (<=009), Cclic Redudac Check BER:??? (<=009), Bit Error Rate This scree displas the Cclic Redudac Check (CRC) ad Bit Rate Error (BER) of the Radio-Pad that is coected to the cotrol pael. The CRC ad BER values should be less tha 10. GSM Ifo Sigal =??? dbm (<=080), GSM Sigal GSM BER:??? (<=004), GSM Bit Error Rate This scree displas the sigal stregth (GSM) ad Bit Rate Error (BER) of a GSM Module that is coected to the cotrol pael. The GSM value should be greater tha or equal to 80 ad the BER value should be less tha 9. Com1 Moitor Scree This scree allows ou to view the data activit of Com1. Press RESET to reset the device coected to this port. Com2 Moitor Scree This scree allows ou to view the data activit of Com2. Press RESET to reset the device coected to this port. Com Port Setup E o elec: U/igi pios U/igi pios ese igi 8 U/igi pios o o ep oad igico o3 odle o o o odle ied o o o odle ie< 7 o o odle < UDL & Digi Optios The cotrol pael must be programmed with the tpe of device that are coected to each of its coms ports. UOboard Digicom, Com Port 1, 2 & 3 The followig devices are available for fittig to the various ports: 0: No Module Fitted - No Devices/PC-Com/ USB-Com/ComPort + 1: Com300 - Com300 Commuicator. 2: Com Com2400 Commuicator. 3: ComISDN - ComISDN Commuicator. 4: ComIP - ComIP/ComWiFi TCP/IP Commuicatio Module. 5: Modem Uit - Stadard Serial PC Modem. 6: Radio Pad - Paket RP9 Radio-Pad. 7: GSM Module - GSM Module/Mobile Phoe. 8: Crestro Sstem - Crestro Home Automatio Sstem. 9: SIP - Serial IP Protocol. 10: RadioPlus - Serial Wireless Receiver. 11: Iovoics Radio - Iovoics Serial Wireless Receiver. 12: WebWaOe/Emizo - WebWaOe/Emizo UDP Module. 13: X-10 Cotrol - X-10 Home Automatio Module. 14: IRIS IP - Chiro IRIS Serial TCP/IP Module. 15: SmartCom Texecom Dual Etheret & WiFi smart commuicator. Oboard Digicom This optio determies what tpe of device is coected to the plugo digmodem coector o the top right had corer of the cotrol pael. (Default = Com300). The followig devices are available from the above list: 0 / 1 / 2 / 3 Com1 This optio determies what tpe of device is coected to the Com1 coector o the left had side of the cotrol pael. (Default = No Module Fitted). The followig devices are available from the above list: 0 / 2 / 3 / 4 / 5 / 7 / 8 / 9 / 10 / 12 / 13 / 14 / 15 If a of the above devices are coected to the cotrol pael o Com1 ad a PC eeds to be coected (for uploadig/dowloadig) the device must be discoected from Com 1 ad the Factor Default butto pressed for 3 secods to allow the PC to talk to the cotrol pael. If the PC is ot coected to the cotrol pael (or is removed) the Com port will automaticall revert back to ormal operatio after 1 miute. Com2 This optio determies what tpe of device is coected to the Com2 coector o the left had side of the cotrol pael. (Default = No Module Fitted). The followig devices are available from the above list: 0 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 /15 Com3 This optio determies what tpe of device is coected to the Com3 coector o the left had side of the cotrol pael. (Default = No Module Fitted). The followig devices are available from the above list: 0 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 /15 Expasio Port This optio determies what tpe of device is coected to the Expasio Port coector (Default = No Module Fitted). Available Device Tpes: 0: No Module Fitted - No Devices 1: AV Module - Audio Verificatio Module 2: id Module - 60IXD id Module INS

102 UDL & Digi Optios 3: X10 Module - X10 Cotroller 4:Memor Module Memor Module (24/48/88/168 ol) 5:Speech Module Speech Module Selectig memor module whe oe is fitted will prevet evets beig recorded to the log. Premier Elite ComIP Premier Elite Series Istallatio Maual To overcome these potetial issues it is advised that the IP address is either reserved for the ComIP, or the IP address used for the ComIP is outside of the DHCP Pool. Accessig the Router O the PC ope the web browser ad tpe the routers IP address ito the address bar as show ad press eter. Values used are tpical ol; the ma be or ma ot the same as the router. Assigig a IP address Before proceedig ou should esure ou ca access the router as chages will eed to be made to esure the ComIP will fuctio as expected, ad so that ou ca cofigure the router to allow access from the outside world (WAN) should ou require. You will eed to kow the followig; the default iformatio should be available from the router documetatio: The IP address of the router The router ame The router password Before assigig a IP address it is importat to uderstad how IP addresses work ad the impact this ca have o the performace of the sstem ad the ComIP. IP Address Iformatio Each TCP/IP ode o a etwork host has a uique IP address. This address provides the iformatio eeded to forward packets o the local etwork ad across multiple etworks if ecessar. IP addresses are specified as x.x.x.x, where each x is a umber from 1 to 254; for example, The ComIP must be assiged a uique IP address to use o a TCP/IP etwork. If the address is left blak or is programmed as the ComIP module will tr to automaticall obtai a IP address from a DHCP server (if oe is ruig o the etwork). Port Numbers The port umber used to idetif the chael for remote iitiated coectios. The default settig is The rage for port settigs is: except for the followig reserved ports: Port Numbers Reserved for Reserved (well kow ports) 9999 Telet setup Reserved Reserved Recommeded for raw socket coectios Gatewa The gatewa address, or router, allows commuicatio to other LAN/WAN segmets. The gatewa address should be the IP address of the router coected to the same LAN segmet as the ComIP. The gatewa address must be withi the local etwork. Netmask (Subet Mask) A etmask defies the umber of bits take from the IP address that are assiged for the host sectio. The default mask is (8 bits). Automaticall Assiged IP Address (DHCP) DHCP (Damic Host Cofiguratio Protocol) is b far the most commo method for routers to assig devices IP addresses so that the ca use coectios to access the Iteret ad other resources o the etwork. IP addresses will be assiged, from a "pool" for a "lease" time, ad ca chage from device da to da; If ou allow the router to automaticall assig a IP address to the ComIP ou ma ecouter problems with IP coflicts if: Whe prompted eter the router user ame & password ad press Eter. Oce ou have access to the router ou are lookig for DHCP Settigs, the example show ma or ma ot be the same as the router. You will see a Start & Ed IP address, this is the DHCP pool or the rage of addresses used b the router whe assigig a address automaticall. You ow kow the address rage beig used b the router. The Default Gatewa is the actual router itself. So ou ca ow decide how ou wat to cofigure the ComIP. If assigig a address withi the DHCP pool ou should reserve the IP address for the ComIP. If assigig a address outside of the DHCP pool, there is o eed to reserve the address. DHCP Reservatio O the PC check for DHCP or Address reservatio. You should have somethig like this. Click Add New or whatever the router displas ad eter the required details. The MAC address is prited o the ComIP ad will be required, as will the IP address ou will be assigig to the ComIP. Oce ou have etered the details press Save. IP Address Subet Mask Gatewa DNS MAC Address Record the details here Aother device o the etwork has ever used the address (ad could do so agai) The ComIP is off lie ad aother device is give the address b the router. 102 INS176-15

103 Premier Elite Series Istallatio Maual Cotrol Pael Programmig Now the ComIP is eabled o the etwork, the Cotrol Pael eeds to be cofigured to allow commuicatio. Eter Egieer mode o the kepad. Press the / (UDL/Digi Optios). Press the / for (Setup Modules). Press the / for (Setup IP data). V3 or later ol the select which Com Port the IP details appl too. Press / ad eter the IP address of the ComIP ou oted i the previous steps. Pressig / whe complete. Pressig the / ke twice will eter a dot. For Example Scroll dow oce to chage the port umber. This is required if ou wish to setup port forwardig through the router. The port ca be left as Scroll dow ad eter the Gatewa address assiged to the ComIP. Scroll dow oce ad eter the subet mask assiged to the ComIP Press N/ twice. Press the / (Comport Setup). Scroll to the comport ou have the ComIP plugged oto. Press / ad / for ComIP module. The settigs will be set to the ComIP. After a miute the uit will be read to use. Exit Egieers mode o the cotrol pael. Port Forwardig WARNING: Care should be take whe opeig ports as this ca leave the router vulerable to malicious attacks. To allow the sstem to commuicate with the outside world, ad vice versa, port forwardig must be eabled o the router for the ComIP. The below example is tpical, however please check ou routers documetatio or the maufacturers website for more iformatio. This will be required i order to use the app remotel. To setup Port Forwardig do the followig. Coect to the Router Look for settigs for "Forwardig, or "Port Forwardig" these could be uder advaced settigs, or i the Firewall settigs. Each maufacturer is differet. Oce ou have foud the optio ou will have somethig like this. Witex setup Local Coectios (LAN) I Witex do the followig:- UDL & Digi Optios Click New O the Customer Details page eter a Accout Referece O the Pael Details page o o Choose the Pael Tpe & Software Versio. Esure the UDL Password matches what is i the pael. The UDL password is foud i UDL/Digi Optios UDL Optios. This should be setup before coectig. o o Click ADD Eter the IP Address of the ComIP ito the Host Address field Eter the port umber from the pael ito the Host Port field. You have ow cofigured Witex for a local coectio to the cotrol pael. To access the pael do the followig: I Witex click o Coect Scroll dow ad choose Click via Network ( o port 10001) Oce coected the status (bottom left of the Witex scree) will chage to Olie Read. Remote Coectios (WAN) Before attemptig to coect to the sstem from a remote locatio, please read the sectio o Port Forwardig, this will eed to be doe to allow access from outside of the LAN. Fixed IP address (Ucommo) If ou have a fixed IP address iteret coectio, complete all of the details above, BUT replace the Host Address with the Fixed IP address provided b the Iteret Service Provider. Damic IP Address (most commo) It is most likel that ou have a Damic IP address assiged b the service provider. This basicall allows the Local sstem to coect to the outside world (Iteret WAN), ad ca chage frequetl. Because of the ature of Damic addresses ou will eed a third part service to maage the IP address to esure ou ca alwas coect to the sstem. You should search for a Damic DNS service provider, who ma or ma ot charge a fee for the service. Oce ou have the service the Host Address will be replaced b the details give to ou b the DDNS provider. Without this service Witex will ot work remotel. Texecom mobile app's (Not Coect) Add a ew rule usig the ComIP IP address ad Port Number ou used earlier. Some routers ma require use of the MAC address to allow port forwardig. Please check with the maufacturer s documetatio or website for details. Texecom mobile apps ca be used to access the sstem either remotel or locall. The apps are supported o ios & Adroid devices ad ca be dowloaded from the respective app stores. All three apps are cofigured ideticall for access. Detailed iformatio regardig all of the app settigs ca be foud i the Help file ad istructios provided with the app. The followig sectios ol deal with the coectio setup, ad eablig Push Notificatios. The app istructios also iclude a pictorial guide ad ca be foud i the App uder Settigs>Help Local Coectio Oce the app is istalled do the followig: Click to Ope Logi the default User Name ad Password are Master & respectivel. You will be asked if ou wat to use the New Laout, choose es Choose M Sites o A warig box will appear saig ou have No Site Settigs, take ote of the istructio ad press OK Swipe Left (ios) or hold (Adroid) o the Site Name ad choose Edit INS

104 UDL & Digi Optios Click o Site Name ad eter a Site Name & Site Summar Click Back ad the IP Details, eter the IP address ad Host Port of the ComIP from the previous steps i these istructios. o Update IP should be eabled if ou wat to setup Push Notificatios. (Uless ou are usig our ow Damic DNS) o Sta Coected stops the app discoectig from the cotrol pael whe swipig betwee screes. Click Back the Securit Details, eter the UDL Password from the Cotrol Pael. This caot be left blak ad must match the Cotrol Pael UDL password. For details o Protected UDL Password please see the app Istructio Maual. Click Back ad the User Areas, Eter the User Code that ou use with the Cotrol Pael ad the User Number (ios) User ID (Adroid). The User Number/ID will be for example 1, do ot tpe User 1. The app is ow set up for Local (LAN) coectios. Remote coectio & Push Notificatios For remote coectios it is highl recommeded that ou eable Push Notificatios. This will mea that Texecom will track the IP address ad update it as required. If the service provider does ot provide ou with a fixed IP address (most do't) ou will require a third part DDNS provider to allow the app to operate remotel if ou do ot "Eable" push otificatios. Port Forwardig must be setup o the router to allow remote coectios. Please see Page 46 Follow the istructios give above for Local Coectios ad the do the followig: Click o M Sites the eter Edit mode for the chose site. Click o Notificatios. You must press Yes ad accept the disclaimer before ou ca proceed. Choose & eter a User Name Choose & eter a Password Eter a valid Address (Notificatios will ot be setup without a valid address) Leave the Accout Number field blak. Click Register Accout You will receive a with a Verificatio Code, follow the istructios i the . Eter the Verificatio Code ou are give ito the Accout Number box ad press Register. Oce ou have completed this step the Accout Number will be automaticall populated with a Accout Number allocated b the Server. Record all of the details here for future use, ad if ou choose to add a additioal device to receive otificatios from the same site. Settig up additioal devices to receive otificatios from the same site requires that ALL details are Idetical all devices. This icludes the Site Name & Site Summar, ad are case sesitive. To register a additioal device complete all details for the Site. O the Registratio page complete all details icludig the Accout Number ou ow have ad press Register. Site Name Site Summar User Name Password Address Push Notificatio Accout Number Texecom App Server Iformatio Primar IP Address Port Number Secodar IP Address Pollig Time Port Number Premier Elite Series Istallatio Maual Miutes Poll Timer MUST be set ARC Settigs & Reportig Optios Eter the Egieers Code Press / (UDL/Digi Optios)the (Program Digi) / Usig the Scroll ke select Which ARC ou wish to use Press / ad scroll to chage the ARC protocol to either SIAII or Cotact ID, both are supported. Press / twice the / I the Pri. Tel No: scree eter the Push Notificatio Sever Address exactl like this: /10001 To eter the dot press the / ke twice. To eter the / press the C/ ke twice o /10001 Press / twice the / I the Sec. Tel No: scree eter the Push Notificatio Sever Address exactl like this: /10001 To eter the dot press the / ke twice. To eter the / press the C/ ke twice o /10001 Press / Press / ad the eter the six digit XXXXXX Accout Number ou were give i the app Press / the / (Dial Attempts) eter a miimum of 6 Press / twice Press / ad edit the Areas ou wish to receive otificatios for. Press / the / ad toggle the reportig optios o or off, depedig o what ou wat to receive otificatios of. Use the / butto to toggle each optio o or off. Press / the / ad scroll across the scree ad use the / butto to toggle optio 7 Coect Via IP ON (a I will be show o the scree) If ou chose SIAII as the Protocol i previous steps scroll oce more to Optio 8 ad toggle Sed SIA Text to ON (a T will be show). V3 or later ol / twice the / ad select which Com Port the IP details appl too. Press / DO NOT EXIT ENGINEERS MODE YOU MUST SETUP POLLING FOR THE SYSTEM TO WORK CORRECTLY. Cotrol Pael Setup for Pollig To setup the Cotrol Pael for Pollig do the followig: Press N/ twice Press the / twice (Global Optios/Sstem Timers) Scroll to Poll IP Ever Press / ad the eter a value 15 miutes (015). The pollig time is cotrolled b the server ad ma be chaged. Eable Digi, Dial All Numbers & Test Call To test the settigs, iitialize a Push Notificatio ad update the IP address i the app a test call should be carried out. Please esure the Digi is Eabled & Dial All Numbers is eabled for sstems with multiple commuicatio devices istalled. Digi Eabled & Dial All Numbers If ou have more tha oe commuicatio device coected to the cotrol pael, Dial All Numbers MUST be eabled; cotiuig from the previous steps: Press N/ the (Digi Optios) Press / the / scroll through the optios ad esure Digi is Eabled (E show o Scree) ad Dial All 104 INS176-15

105 Premier Elite Series Istallatio Maual Numbers (A show o scree)are o, Use the / butto to toggle each optio o or off. Press / Iitialise a Test Call Press N/ the / (Start Test Call) Press to start the test call. All commuicatio devices o the sstem will carr out a test call. Oce completed ad if successful ou will receive a otificatio from the Cotrol Pael to the app. Do ot exit Egieers mode et. Please read below: Optioal Additioal Pael Settigs Due to the ature of routers ad services provided b the ISP, devices of all tpes ca just "drop off" a etwork, certai circumstace ma cause a ATS Failure to be displaed to the ed user. The pael will automaticall recover itself oce the etwork is available. However to avoid this potetial icoveiece please see below. EN50131 Sstem With a EN50131 istalled sstem, the warig about a ATS Failure will ol be visible to the User whe the eter their code ad the fault is still preset. I the case of this tpe of sstem the chaces of a User actuall seeig the fault will be miimal. It is also a requiremet of sstems with additioal commuicatio devices that sigal to a ARC or other respose authorit to report these faults. UDL & Digi Optios The IP address will have chaged. The address ow beig show is provided b the ISP ad will match the WAN IP address show i the router. If for some reaso this has ot worked please see details below to troubleshoot the istallatio. Premier Elite ComWiFi Iitial Module Setup These steps MUST be carried out FIRST. Coect the ComWiFi oto the comport of the cotrol pael usig the lead provided. Usig a Wi-Fi eabled computer, tablet or mobile device sca for ew wireless etworks. Select the 'Com WiFi' etwork. Eter the etwork ke password texecom2015 ad press coect. O the same device ope the Web browser ad tpe the IP address ito the address bar. You will eed to eter the user ame as master ad the password as You are ow olie with the ComWiFi module, ad should see the sstem image show o the followig page. Take a ote of the STA Mode MAC Address. STA Mode MAC Address : : : : : No-EN50131 Sstem If the sstem is istalled ad cofigured to NOT compl with EN50131 ad has o additioal commuicatio devices sigalig to a ARC or respose authorit, the a ATS failure will be displaed immediatel o the kepad at the time the fault occurs. Agai o actio is actuall required b the user as the pael will recover of its ow accord. However if the Users WiFi coectio has a tedec to drop devices, this could be a source of frustratio. Two optios are available as detailed below. Settig a ATS Fault dela Eter Egieers Mode Press the / (Global Optios) Press / (Sstem Timers) Use ad scroll to ATS Fault Dela Press /, the eter 005 to set a five miute dela Press / Exit Egieers Mode Disablig ATS failed messages To stop the kepad displaig the ATS Failed message i this sceario do the followig; Eter Egieers Mode Press the / (Global Optios) Press the / agai (Moitor Hardware) Press / Press / agai to toggle ATS Path Faults OFF Press / Press N/ twice, the, / Press, / a ad to ATS Path Faults Press /,, / to tur off Exit Egieers Mode If the ComIP misses its pollig i a 1 hour time widow, the server will sed otificatio directl to the app. Do NOT do this o a EN50131 sstem, or o a sstem that has additioal commuicatio that sigals to a ARC or other respose authorit. Chage Password & User Name Before proceedig it is importat to chage the User Name ad Password i order to keep the ComWiFi secure. Click o Accout o the left side of the scree ad the eter a ew User Name ad Password Alphaumeric characters Lati A-Z ad Roma 0-9 ONLY. Special characters must ot be used. Followed b Save. You will be prompted to Restart the uit. Setup the uit as described o page 45 ad the allow it to restart. Please ote it is NOT possible to retrieve the User Name & Password oce it has bee chaged. You will have NO access to the device without it. It is ot possible to default the uit without the User Name & Password. Checkig IP Updates Now do the followig to cofirm that the setup is correct. Logi to the app Coect To Site, ou should ow be olie with the sstem Go back to M Sites Go to Edit Site ad click IP Details INS

106 UDL & Digi Optios Premier Elite Series Istallatio Maual Netmask (Subet Mask) A etmask defies the umber of bits take from the IP address that are assiged for the host sectio. The default mask is (8 bits). Automaticall Assiged IP Address (DHCP) DHCP (Damic Host Cofiguratio Protocol) is b far the most commo method for routers to assig devices IP addresses so that the ca use WiFi or hardwired coectios to access the Iteret ad other resources o the etwork. IP addresses will be assiged, from a "pool" for a "lease" time, ad ca chage from device da to da; for example whe ou leave our home ad lose WiFi coectio there is o guaratee whe ou retur that ou will be give the same address, it ma be i use b somethig else. User Name Password Record the details here Assigig a IP address Before proceedig ou should esure ou ca access the wireless router as chages will eed to be made to esure the ComWiFi will fuctio as expected; ad so that ou ca cofigure the router to allow access from the outside world (WAN) should ou require. You will eed to kow the followig; the default iformatio should be available from the router documetatio: The router's SSID (wireless etwork ame) The WiFi password The IP address of the router The router password Before assigig a IP address it is importat to uderstad how IP addresses work ad the impact this ca have o the performace of the sstem ad the ComWiFi. If ou allow the wireless router to automaticall assig a IP address to the ComWiFi ou ma ecouter problems with IP coflicts if: Aother device o the etwork has ever used the address (ad could do so agai) The ComWiFi is off lie ad aother device is give the address b the router To overcome these potetial issues it is advised that the IP address is either reserved for the ComWiFi, or the IP address used for the ComWiFi is outside of the DHCP Pool. Accessig the Router O a PC ope the web browser ad tpe the router's IP address ito the address bar as show ad press eter. Values used are tpical ol; the ma or ma ot be the same as the router. Whe prompted eter the router user ame & password ad press Eter. Oce ou have access to the router ou are lookig for DHCP Settigs. The example show ma or ma ot be the same as the router. You will see a Start & Ed IP address, this is the DHCP pool or the rage of addresses used b the router whe assigig ad address automaticall. IP Address Iformatio Each TCP/IP ode o a etwork host has a uique IP address. This address provides the iformatio eeded to forward packets o the local etwork ad across multiple etworks if ecessar. IP addresses are specified as x.x.x.x, where each x is a umber from 1 to 254; for example, The ComWiFi must be assiged a uique IP address to use o a TCP/IP etwork. If the address is left blak or is programmed as the ComWiFi module will tr to automaticall obtai a IP address from a DHCP server (if oe is ruig o the etwork). Port Numbers The port umber used to idetif the chael for remote iitiated coectios. The default settig is The rage for port settigs is: except for the followig reserved ports: Port Numbers Reserved for Reserved (well kow ports) 9999 Telet setup Reserved Reserved Recommeded for raw socket coectios Gatewa The gatewa address, or router, allows commuicatio to other LAN/WAN segmets. The gatewa address should be the IP address of the router coected to the same LAN segmet as the ComWiFi. The gatewa address must be withi the local etwork. You ow kow the address rage beig used b the router. The Default Gatewa is the actual router itself. So ou ca ow decide how ou wat to cofigure the ComWiFi, either method is valid, but the both require differet steps. Damic IP Address (DHCP Reservatio required) With this method ou will be assiged a address from the DHCP pool ad will eed to reserve the address for the ComWiFi. O the WiFi eabled device where ou accessed the ComWiFi do the followig. Click o the STA tab o the left side of the scree. Esure Obtai a IP Address Automaticall is Eabled. Uder the 'Network Name' click o Sca ad the select the WiFi etwork. This is the ame of the wireless router (SSID) that is coected to the iteret. Eter the router password if required. Click Save. Whe prompted Restart the device, discoect from the ComWiFi 106 INS176-15

107 Premier Elite Series Istallatio Maual Oce the device has restarted refresh the page or recoect to the ComWiFi ad ope the STA page. Take ote of the IP address, subet mask, Gatewa & DNS Server for the etwork. For Example IP = Subet mask = , Gatewa = & DNS = If ou experiece issues with coectio, or the ComWiFi beig discoected from the router, ou should assig a fixed IP address that is outside of the DHCP pool. See page 46 for details. Click Save ad Restart, ou ca the close the web browser. If our browser prompts ou to save the password select o, or ot ow. The uit will restart durig this period. The uit ca take up to 5 miutes to restart. You should ot attempt to coect to the uit durig this time. IP Address Subet Mask Gatewa DNS Record the details here Re-sca for wireless etworks o the WiFi device ad coect to the Wi-Fi router. I the web browser o a PC o the same etwork, ou should be able to coect to the ComWiFi with the ew IP address ou have give it. This will prove the settigs have bee accepted. I this example the IP address assiged to the ComWiFi is withi the DHCP Pool, ad should therefore be reserved so that it caot be used b aother device. DHCP Reservatio O the PC check for DHCP or Address reservatio. You should have somethig like this. UDL & Digi Optios Mauall Assigig a IP Address (Outside DHCP pool) With this method ou will be assigig a address to the ComWiFi which is outside of the DHCP pool. IP address rages go from I the example i the previous sectio we ca see that the IP address rage o the router starts at ad eds at We ow have the optio of assigig a address betwee 2-49 or O the WiFi eabled device where ou accessed the ComWiFi do the followig. Click o the STA Settig tab o the left side of the scree. Esure Obtai a IP Address Automaticall is Disabled. Uder the 'Network Name' click o Sca ad the select the Wi-Fi etwork. This is the ame of the wireless router (SSID) that is coected to the iteret. Eter the router password if required. Eter the chose IP address for example Eter the subet mask (usuall ) but ca be foud o the router. Eter the Gatewa IP address (the router) Eter the DNS Server details (usuall same as the router) Click Save. Whe prompted Restart the device. Discoect the ComWiFi from the cotrol pael com port. Re-sca for wireless etworks o the WiFi device ad coect to the WiFi router. If ou caot fid all of the required details o the router, simpl follow the istructios to automaticall assig ad IP address, ad the disable DHCP ad overtpe the IP address with the oe ou have chose that is outside the DHCP pool. I the web browser o a PC o the same etwork ou should ow be able to coect to the ComWiFi with the ew IP address ou have give it. This will prove the settigs have bee accepted. Pael Settigs Now that the ComWiFi is eabled o the etwork, the cotrol pael eeds to be cofigured to allow commuicatio. Eter Egieer mode o the kepad. Press the / (UDL/Digi Optios). Press the / for (Setup Modules). Press the / for (Setup IP data). Press / ad eter the IP address of the ComWiFi ou oted i the previous steps. Pressig / whe complete. Pressig the / ke twice will eter a dot. For Example Scroll dow oce to chage the port umber. This is required if ou wish to setup port forwardig through the router. The port ca be left as Scroll dow ad eter the Gatewa address assiged to the ComWiFi. Scroll dow oce ad eter the subet mask assiged to the ComWiFi Press N/ twice. Press the / (Comport Setup). Press / ad / for Com-IP module. Recoect the ComWiFi to the cotrol pael com port. The settigs will be set to the ComWiFi. If ou used DHCP to obtai the IP address, this will ow be disabled o the STA settigs page of the ComWiFi to preserve the IP address, ad is the correct operatio. Exit egieers mode o the cotrol pael. Click Add New or whatever the router displas ad eter the required details. The MAC address ou oted dow o page 44 will be required, as will the IP address of the ComWiFi. Oce ou have etered the details press Save. The cotrol pael ca ow be accessed o the LAN. However, to access the pael from the Texecom mobile apps or Witex remotel, additioal steps are required withi the various programmes ad the cotrol pael. INS

108 UDL & Digi Optios Premier Elite Series Istallatio Maual Port Forwardig WARNING: Care should be take whe opeig ports as this ca leave the router vulerable to malicious attacks. To allow the sstem to commuicate with the outside world, ad vice versa, port forwardig must be eabled o the router for the ComWiFi. The below example is tpical, however please check the router's documetatio or the maufacturers website for more iformatio. This will be required i order to use the app remotel. To setup Port Forwardig do the followig. Coect to the Router Look for settigs for "Forwardig, or "Port Forwardig" these could be uder advaced settigs, or i the Firewall settigs. Each maufacturer is differet. Oce ou have foud the optio ou will have somethig like this. Add a ew rule usig the ComWiFi IP address ad Port Number ou used earlier. Some routers ma require use of the MAC address to allow port forwardig. Please check with the maufacturer s documetatio or website for details. Witex setup Local Coectios (LAN) I Witex do the followig:- Click New O the Customer Details page eter a Accout Referece O the Pael Details page o o Choose the Pael Tpe & Software Versio. Esure the UDL Password matches what is i the pael. The UDL password is foud i UDL/Digi Optios UDL Optios. This should be setup before coectig. o o Click ADD Eter the IP Address of the ComWiFi ito the Host Address field Eter the port umber from the pael ito the Host Port field. You have ow cofigured Witex for a local coectio to the cotrol pael. To access the pael do the followig: I Witex click o Coect Scroll dow ad choose Coect via Network for example ( o port 10001) Oce coected the status (bottom left of the Witex scree) will chage to Olie Read. Remote Coectios (WAN) Before attemptig to coect to the sstem from a remote locatio, please read the sectio o Port Forwardig, this will eed to be doe to allow access from outside of the LAN. Fixed IP address (Ucommo) If ou have a fixed IP address iteret coectio, complete all of the details above, BUT replace the Host Address with the Fixed IP address provided b the Iteret Service Provider. Damic IP Address (most commo) It is most likel that ou have a Damic IP address assiged b the service provider. This basicall allows the Local sstem to coect to the outside world (Iteret WAN), ad ca chage frequetl. Because of the ature of Damic addresses ou will eed a third part service to maage the IP address to esure ou ca alwas coect to the sstem. You should search for a Damic DNS service provider, who ma or ma ot charge a fee for the service. Oce ou have the service the Host Address will be replaced b the details give to ou b the DDNS provider. Texecom Mobile App's Texecom mobile apps ca be used to access the sstem either remotel or locall. The apps are supported o ios & Adroid devices ad ca be dowloaded from the respective app stores. All three apps are cofigured ideticall for access. Detailed iformatio regardig all of the app settigs ca be foud i the Help file ad istructios provided with the app. The followig sectios ol deal with the coectio setup, ad eablig Push Notificatios. The app istructios also iclude a pictorial guide ad ca be foud i the App uder "Settigs > Help" Local Coectio Oce the app is istalled do the followig: Click to Ope Logi the default User Name ad Password are Master & respectivel. You will be asked if ou wat to use the New Laout, choose Yes Choose M Sites o A warig box will appear saig ou have No Site Settigs, take ote of the istructio ad press OK Swipe Left (ios) or hold (Adroid) o the Site Name ad choose Edit Click o Site Name ad eter a Site Name & Site Summar Click Back ad the IP Details, eter the IP address ad Host Port of the ComWiFi from the previous steps i these istructios. o Update IP should be eabled if ou wat to setup Push Notificatios. See page 104. o Sta Coected stops the App discoectig from the cotrol pael whe swipig betwee screes. Click Back the Securit Details, eter the UDL Password from the Cotrol Pael. This caot be left blak ad must match the Cotrol Pael UDL password. For details o Protected UDL Password please see the App Istructio Maual. Click Back ad the User Areas, Eter the User Code that is used with the Cotrol Pael ad the User Number (ios) User ID (Adroid). The User Number/ID will be for example 1, do ot tpe User 1. The App is ow set up for Local (LAN) coectios. Remote Coectio & Push Notificatios For remote Coectios it is highl recommeded that ou eable push otificatios. This will mea that Texecom will track the IP address ad update it as required. If the service provider does ot provide ou with a fixed IP address (most do't) ou will require a third part DDNS provider to allow the app to operate remotel if ou do ot "Eable" push otificatios. Port Forwardig must be setup o the router to allow remote coectios. Please see Page 46 Follow the istructios give above for Local Coectios ad the do the followig: Click o M Sites the eter Edit mode for the chose site. Click o Notificatios. You must press Yes ad accept the disclaimer before ou ca proceed. Choose & eter a User Name Choose & eter a Password eter a valid Address (Notificatios will ot be setup without a valid address) Leave the Accout Number field blak. Click Register Accout You will receive a with a Verificatio Code, follow the istructios i the . Eter the Verificatio Code ou are give ito the Accout Number box ad press Register. Oce ou have completed this step the Accout Number will be automaticall 108 INS176-15

109 Premier Elite Series Istallatio Maual populated with a Accout Number allocated b the server. Record all of the details here for future use, ad if ou choose to add a additioal device to receive otificatios from the same site. Settig up additioal devices to receive otificatios from the same site requires that ALL details are Idetical all devices. This icludes the Site Name & Site Summar. To register a additioal device complete all details for the Site. O the Registratio page complete all details icludig the Accout Number ou ow have ad press Register. Site Name Site Summar User Name Password Address Push Notificatio Accout Number Texecom App Server Iformatio Primar IP Address Port Number Secodar IP Address Pollig Time Port Number Miutes Poll Timer MUST be set ARC Settigs & Reportig Optios Eter our Egieers Code Press / (UDL/Digi Optios)the (Program Digi) / Usig the Scroll ke select Which ARC ou wish to use Press / ad scroll to chage the ARC protocol to either SIAII or Cotact ID, both are supported. Press / twice the / I the Pri. Tel No: scree eter the Push Notificatio Sever Address exactl like this: /10001 To eter the dot press the / ke twice. To eter the / press the C/ ke twice o /10001 Press / I the Sec. Tel No: scree eter the Push Notificatio Sever Address exactl like this: /10001 To eter the dot press the / ke twice. To eter the / press the C/ ke twice o /10001 Press / Press / ad the eter the six digit XXXXXX Accout Number ou were give i the APP Press / the / (Dial Attempts) eter a miimum of 2 Press / twice Press / ad edit the Areas ou wish to receive otificatios for. Press / the / ad toggle the reportig optios o or off, depedig o what ou wat to receive otificatios of. Use the / butto to toggle each optio o or off. Press / the / ad scroll across the scree ad use the / butto to toggle optio 7 Coect Via IP ON (a I will be show o the scree) If ou chose SIAII as our Protocol i previous steps scroll oce more to Optio 8 ad toggle Sed SIA Text to ON (a T will be show) V3 or later ol / twice the / ad select which Com Port the IP details appl too. Press / UDL & Digi Optios DO NOT EXIT ENGINEERS MODE. YOU MUST SETUP POLLING FOR THE SYSTEM TO WORK CORRECTLY. Cotrol Pael Setup for Pollig To setup the Cotrol Pael for Pollig do the followig: Press N/ twice Press the / twice (Global Optios/Sstem Timers) Scroll to Poll IP Ever Press / ad the eter a value 15 miutes (015). The pollig time is cotrolled b the server ad ma be chaged. Eable Digi, Dial All Numbers & Test Call To test the settigs, iitialize a Push Notificatio ad update the IP address i the App a test call should be carried out. Please esure the Digi is Eabled, Dial All Numbers is eabled for sstems with multiple commuicatio devices istalled. Digi Eabled & Dial All Numbers If ou have more tha oe commuicatio device coected to the cotrol pael, Dial All Numbers MUST be eabled; cotiuig from the previous steps: Press N/ the (Digi Optios) Press / the / scroll through the optios ad esure Digi is Eabled (E show o Scree) ad Dial All Numbers (A show o scree)are o, Use the / butto to toggle each optio o or off. Press / Iitialise a Test Call Press N/ the / (Start Test Call) Press to start the test call. All commuicatio devices o the sstem will carr out a test call. Oce completed ad if successful ou will receive a otificatio from the Cotrol Pael to the App. Do ot exit egieers mode et. Please read below Optioal Additioal Pael Settigs Due to the ature of WiFi ad the fact that devices of all tpes ca just "drop off" a WiFi etwork, certai circumstace ma cause a ATS Failure to be displaed to the ed user. The pael will automaticall recover itself providig the WiFi etwork is still available. However to avoid this potetial icoveiece please see below. EN50131 Sstem With a EN50131 istalled sstem, the warig about a ATS Failure will ol be visible to the User whe the eter their code ad the fault is still preset. I the case of this tpe of sstem the chaces of a User actuall seeig the fault will be miimal. It is also a requiremet of sstems with additioal commuicatio devices that sigal to a ARC or other respose authorit to report these faults. No-EN50131 Sstem If the sstem is istalled ad cofigured to NOT compl with EN50131 ad has o additioal commuicatio devices sigalig to a ARC or respose authorit, the a ATS failure will be displaed immediatel o the kepad at the time the fault occurs. Agai o actio is actuall required b the user as the pael will recover of its ow accord. However if the Users WiFi coectio has a tedec to drop devices, this could be a source of frustratio. Two optios are available as detailed below. Settig a ATS Fault dela Eter Egieers Mode Press the / (Global Optios) Press / (Sstem Timers) Use ad scroll to ATS Fault Dela Press /, the eter 005 to set a five miute dela Press / Exit Egieers Mode INS

110 UDL & Digi Optios Disablig ATS failed messages To stop the kepad displaig the ATS Failed message i this sceario do the followig; Eter Egieers Mode Press the / (Global Optios) Press the / agai (Moitor Hardware) Press / Press / agai to toggle ATS Path Faults OFF Press / Press N/ twice, the, / Press, / a ad to ATS Path Faults Press /,, / to tur off Exit Egieers Mode If the ComWiFi misses its pollig i a 1 hour time widow, the server will sed otificatio directl to the app. Do NOT do this o a EN50131 sstem, or o a sstem that has additioal commuicatio that sigals to a ARC or other respose authorit. Checkig IP Updates Now do the followig to cofirm that the setup is correct. Premier Elite Series Istallatio Maual Chagig the ComWiFi Laguage Itroductio The ComWiFi is capable operatio with two laguages. B default uits are shipped with Eglish loaded. As the become available laguage file updates will be available from our website o the ComWiFi Dowloads sectio. To upgrade the WebPages displaed b the ComWiFi do the followig: Assig a IP address as per the previous istructios o Page 45 or 46 Usig a PC coect to the IP address of the ComWiFi i a web Browser o I the address bar tpe the IP address for example o Eter the User Name & Password to access the device The page will look somethig like this. Logi to the App Coect To Site, ou should ow be olie with the sstem Go back to M Sites Go to Edit Site ad click IP Details The IP address will have chaged. The address ow beig show is provided b the ISP ad will match the WAN IP address show i the router. Defaultig the Com WiFi Factor Settigs If ou are experiecig coectio problems we would first suggest returig the ComWiFi to factor settigs. The below steps provide a step b step guide o how to do this. Usig a Wi-Fi eabled computer, tablet or mobile device sca for ew wireless etworks. Select the 'Com WiFi' etwork. Eter the password texecom2015 ad press Coect. Ope a Web browser ad tpe the IP address ito the address bar. You will eed to eter the user ame ad password that ou have setup previousl. Click o 'Restore' o the left side of the scree. Click o 'OK' to restore factor settigs. All user data icludig the user ame ad password will be set back to default ad ou should start the process agai from the begiig of this maual. The Restore process ca take several miutes, so please be patiet. I The address bar tpe the followig or edit the web address to read The followig page will appear Browse to the ew.bin file ou dowloaded, this will cotai ew WebPages which will iclude Eglish ad the chose Laguage. Press Upload, the page will look like this. The process ca take several miutes, so please be patiet. Oce complete the page will chage, ad ma appear as below depedig o our browser. The web address will read idicatig the operatio has bee completed successfull 110 INS176-15

111 Premier Elite Series Istallatio Maual UDL & Digi Optios Alterativel, a Vodafoe mobile phoe ma be used to locate the poit of strogest sigal. The sigal stregth idicator is ormall a bar or lie at the side of the displa o the mobile telephoe. Note: The mobile phoe MUST use the Vodafoe etwork. A mobile phoe that uses a differet radio etwork will NOT show the correct sigal stregth. This mobile phoe method caot provide iformatio o the availabilit, sigal stregth ad iterferece status of all radio Base Statios i the surroudig area. Use of the CS2366 Radio Test Set is recommeded. Whe ou have idetified the poit of the strogest sigal, make a ote of this poit ad use it whe istallig the Com GSM aerial. Please wait for a few miutes for the ComWiFi to reset. Recoect to the ComWiFi through the browser ad the ew laguage chose will ow be available to select from the top right had corer of the WebPage. DualCom Iside (48 Ol) Aerial Sitig ALWAYS do a site surve to fid a area of strog sigal before istallatio. Istallig a Com GSM with a weak sigal is bad istallatio practice. The aerial should be mouted verticall at the poit of strogest sigal. This is usuall the highest poit i the buildig (ofte the loft area). Avoid istallig the aerial directl uder metal roofs or withi metal skied buildigs because this will reduce the sigal stregth ad ma ihibit operatio completel. If this is uavoidable, the strogest sigal will be foud awa from the metal roof or close to large exteral widows or sklights. Avoid istallig the aerial close (2 metres) to cable rus, ductig, structural metalwork, metal pipes, water taks ad electroic equipmet, e.g. photocopiers, fax machies etc. These ca have similar effects to metal roofs. Reliable operatio is ulikel with a low sigal stregth. If the displa shows that the sigal stregth is 40% or lower, ou should improve the sigal stregth. This ma be achieved b repositioig the aerial. The GPRS aerial lead should ot be cut, therefore repositioig the aerial ma require that the Com GSM is also repositioed. The DualCom CS2366 Radio Test Set is ideal for surveig a site. This hadheld uit ca check the availabilit, sigal stregth ad iterferece status of all surroudig Base Statios. I additio, it will idetif the best locatio for a DualCom GPRS aerial withi the buildig, help to avoid sources of iterferece ad ca cofirm the availabilit of a GPRS service at the proposed site. Where a Nokia Net Mo phoe is available ad a Vodafoe SIM Card is fitted, it ma be used i the same maer as the CS2366 Radio Test Set. Remember: It is alwas easier to fid the poit of strogest sigal before the equipmet is fitted to a wall. Movig aerials, cables, trukig etc. after istallatio is wasted time ad effort. Iitial Setup Please follow the istructios i INS176 to istall the equipmet ad iitiate the power up sequece. Whe applig power for the first time, the factor default settigs must be loaded. DualCom Iside caot be setup through Witex, so please follow the diagrams ad istructios to setup DualCom Iside. The process for eablig DualCom Iside is as follows:- 1. Istall Equipmet 2. Plug Com2400 oto cotrol pael PCB 3. Plug Com GSM oto Com port 1 a. Set optio switches 1 & 2 to ON ad 3 & 4 to OFF 4. Eter egieers mode o kepad 5. Select UDL/Digi Optios 6. Com Port Setup 7. Select Com2400 as the Digicom 8. Select ComIP for Com port 1 9. Eable DualCom Iside 10. Choose our ARC 11. Eter our Gemii Accout umber 12. Eter our PSTN umber 13. Test the equipmet The flow diagram o the followig page shows the procedure to eable ad test DualCom Iside. INS

112 UDL & Digi Optios E o elec: U/igi pios U/igi pios ese igi 8 U/igi pios o o ep oad igico ohig ied 2 oad igico o 4 odle 2 o o ohig ied 4 o o oi odle N 9 U/igi pios alo Iside 1 EMIZON 21 TCD alo Iside Ealed igal egh Q:4% E:% I II???????????????????? s o o U eii cco?????? cco???? o e Up o 1 es alls o 1 N N Premier Elite Series Istallatio Maual This lead coverts the TTL port to stadard RS232. Pael Com Port Setup The Com Port speed eeds to be cofigured to19200 baud if usig Com 2 ( Com 1 is set to baud at default ad caot be chaged ). See page 101 (Com Port Setup). Pael ARC Setup To set up the ARC accout ol a few settig eed to be made. see page 91 (Program Digi). Set the reportig Protocol to SIA or Cotact ID. Set a accout umber. Select Coect via IP i the protocol optios. see page 95 (Digi Optios). Select Eable commuicator Pael IP Setup The cotrol pael commuicates to the ARC via the EMIZON TCD. The TCD s primar sigallig path is via a IP etwork; therefore the cotrol pael eed s a IP address so that it ca coect to a local etwork. Esure that the customer has filled i the Customer IT Surve Form provided b EMIZON. This will give ou the iformatio ou eed to set up the IP data o the cotrol. see page 100 (Setup IP Module) Coect the Etheret cable betwee the Etheret port o the TCD uit ad the Network router. Itroductio The EMIZON 21 TCD is compatible with all Premier Elite Cotrol Paels. PCB Laout PSTN Coectio to phoe or pael Primar path LED Power LED TCD serial umber o label Mode Butto Set Butto 1 S/N: pi Iputs icl. BSIA Form 175 RS232 M RS485 S Power suppl iputs SIM Card Rela Outputs Secodar path LED Etheret activit LED Displa GPRS activit LED GPRS aerial Coectio Etheret port TCD Coectio The Emizo 21 coects to the paels Via a 232 covertor lead. Texecom 232 Covertor *Order Part Number from Emizo Commissioig Now that the programmig for the EMIZON21 is complete ou eed to power up the TCD ad wait 15 secods (approx) ad check the followig Flickerig light o the Etheret path LED. Flashig gree light o the GPRS path LED. These idicate that the sigallig paths are available ad that the TCD is read to be commissioed. Now ou eed to call The ARC ( ) with the TCD serial umber that is prited o the label located o the frot cover, the ARC will the associate the TCD to this specific istallatio o their sstem ad activate it. If this is the first time this TCD is beig istalled, ou will eed to wait for the tl idicatio to appear o the displa ad the press ad hold the set butto for 4 secods. The TCD will cotact EMIZON service platform ad the displa will alterate betwee tl ad 01, the CA (completel Active). Alterate flashig decimal poits idicate ormal operatio followig a successful commissio. The GPRS ad Etheret LED s will tur gree to idicate that the are commuicatig with the service platform. Witex UDL via EMIZON 21 TCD To utilise the UDL optio ou will eed to sig up with the Emizo UDL service. After sigig up ou will be set our securit certificate alog with UDL server logi details. You will also be give the server IP ad port address. You will eed to eter these details i the Network details sectio of Pael details i Witex. You must also istall the Emizo UDL software o to the PC ou ited to use for UDL. 112 INS176-15

113 ON Premier Elite Series Istallatio Maual WebWaOe WebWaOe itegratio with the cotrol paels provides the followig features 7 fuctios:- Automatic Commissioig ATS Moitorig ad Fault Reportig Alarm ad Fault reportig Remote Support Upload/Dowload Remote Maiteace The coectio is via a TTL lik to a Com Port o the cotrol pael. You will eed the followig to coect ad setup the module:- WebWaOe cable Witex software The WebWa solutio is quick ad eas to istall ad commissio with our chose ARC. A B C SIM Programmig the Cotrol Pael Digi Optios Eable commuicator must be ticked UDL passcode (set i the pael) must match. Dial attempts 1, rig before aswer 3 See page 95 I ARC s 1. Accout umber (site ID) 2. SIA Level 2/3 3. Coect Via IP - ticked 4. Sed SIA text ticked See page 91 I Radio-Pad ad Com Port optios 1. Com Port 1 WebWaOe module 2. Local IP address Local IP port Gatewa Subet Mask Name/SMG port See page 100 UDL & Digi Optios Witex Programmig All other settigs are doe b the Witex Comms meu This ca be cofigured o a local PC plugged o to Com Port 2 with the Module ruig o Com Port 1 or vice versa. The Auto Take O process completes the istallatio. The WebWa servers automaticall programme the module to work seamlessl with the pael to eable SIA alarms, Upload Dowload ad secure remote access usig the Texecom Witex software. Digi Optios Automatic SIA 3 with text eriched messages All alarms geerated b the Alarm Sstem are automaticall set to the AMS usig SIA. SIA messages provide a full audit trail of a evet - which detector, locatio, time ad date, ad a permaet record of ever alarm. Messages for set ad uset iclude who, where, time, ad date, all recorded. Serial Pael Coectio Coect the coector cable to the Texecom oto Com Port 1. Com port 2 usuall has a local PC or other peripheral equipmet coected. WebWa SPT T - Red R - Gree RTN - Blue Texecom Com Port 1 Eter the optios show icludig the callback umber. Coect the WebWa PWR + ad - to a relevat Power (+12V/+24V) ad Groud (0V) termials. The Texecom pael cofiguratio is uploaded via the Witex software ad dowloaded to the pael o com port 2 from a local PC. The followig requires cofigurig i the pael. INS

114 UDL & Digi Optios Premier Elite Series Istallatio Maual ARC's Accout No: should match the ARC Site/Chip ID ad tick the relevat trigger evet boxes relevat to the premises. Select the Com Port Coect Via IP Checked Protocol SIA Level2/3 Radio Pad ad Com Port Optios If the SMS call cetre is utilised the egieer should eter the appropriate umber ad it should be cofigured uder: SMS Call Cetre 1&2 The SMS cetre telephoe umber is used to sed SMS text messages to mobile phoes. (Default = ). Com-IP Details if the pael is beig programmed with a laptop o com port 2, ad the WebWa is coected to com port 1 the SPT will be lost from the pael util the Witex sessio is closed. 114 INS176-15

115 Premier Elite Series Istallatio Maual Chiro IRIS The Chiro IRIS Touch rage of commuicators offers a wa of trasmittig alarm sigals to a Alarm Receivig Cetre (ARC) over a Etheret (IP) path, GPRS path, ad PSTN path or a Combiatio as opposed to usig a traditioal PSTN lies. To coect to the cotrol pael a RS232 Iterface is required. For the IRIS 400 series this is a modified PC-Com JAA-0001 ad for the IRIS 600 series is a Chiro Tex 600 lead. UDL & Digi Optios Programmig For both Alarms ad Witex upload/dowload the followig should be programmed. UDL/DIGI Optios For full details o the optios listed please see page 91 to B42B42BProgram Digi Arc 1 Protocol i.e. Fast Format, Cotact ID, or SIA level 2/3. Primar No Set this to the IP address of the Moitorig Cetre i a 12 digit format = The TTL coectio is made to either Com1 or Com 2 o the Cotrol pael. PCB Laout Secodar No Accout Number Leave blaks as the IRIS Sstem will receive the secodar umber from the Moitorig Cetre Secure Apps platform. Eter i the accout umber from the Moitorig Cetre, 4or 6 digits. Dialler Attempts Leave as the default 3 Report optios The Reportig Optios will chage depedig o the alarm format selected, please set up the various reportig optio for the Alarm evet ou wish to sed to the Moitorig Cetre Cofig Eable the Coect via IP (Ke press 7). 52B52B52BDigi Optios Eable the Digi 62B62B62BUDL Optios UDL Password (ke press 1) ou should ow see E o optio scree ow. Must match the UDL password i Witex 72B72B72BSetup Modules Setup IP Data 1 = ComIP Address for the IRIS e.g = ComIP Port 3 = ComIP Gatewa e.g To use DHCP leave the ComIP Address & Gatewa blak ComIP Netmask Eter the etwork subet mask i.e Pollig/SMG IP 82B82B82BCom Port Setup Com Port 1 Set this to the IP address of the Moitorig Cetre i a 12 digit format i.e = Set to IRIS IP Module GPRS Ifo To programme the APN ad the User Name & Password please see page 100 To programme ad commissio a other features of the IRIS uits please refer to the Chiro IRIS istallatio maual. PC Com Modificatio Cut the DB9 Male ed of off the PC Com ad wire as follows IRIS RS232 (DB9 Female) Pi 2 Pi 3 Pi 5 PC Com Yellow Blue Black Tex600 Lead INS

116 UDL & Digi Optios Premier Elite Series Istallatio Maual Zoe Alarm Reportig Codes The Reportig codes for Cotact ID ad SIA are full cofigurable, however these codes ca ol be chaged usig Witex dowloadig software. The followig tables show the default codes for each evet o the sstem: Default Zoe Evet Codes No Zoe Tpe Evet Reportig Group Cotact ID SIA 00 Etr/Exit 1 Alarm Alarm 134 BA Alarm Restore Restore 134 BH Omit Omit/Reistate 573 BB Reistate Omit/Reistate 573 BU 01 Etr/Exit 2 Alarm Alarm 134 BA Alarm Restore Restore 134 BH Omit Omit/Reistate 573 BB Reistate Omit/Reistate 573 BU 02 Guard Alarm Alarm 130 BA Alarm Restore Restore 130 BH Omit Omit/Reistate 573 BB Reistate Omit/Reistate 573 BU 03 Guard Access Alarm Alarm 132 BA Alarm Restore Restore 132 BH Omit Omit/Reistate 573 BB Reistate Omit/Reistate 573 BU 04 24Hr Audible Alarm Tamper 133 BA Alarm Restore Restore 133 BH Omit Omit/Reistate 572 BB Reistate Omit/Reistate 572 BU 05 24Hr Silet Alarm Tamper 133 BA Alarm Restore Restore 133 BH Omit Omit/Reistate 572 BB Reistate Omit/Reistate 572 BU 06 Audible PA Alarm Priorit Alarm 123 PA Alarm Restore Restore 123 PH Omit Omit/Reistate 573 PB Reistate Omit/Reistate 573 PU 07 Silet PA Alarm Priorit Alarm 122 HA Alarm Restore Restore 122 HH Omit Omit/Reistate 573 HB Reistate Omit/Reistate 573 HU 08 Fire Alarm Alarm Priorit Alarm 110 FA Alarm Restore Restore 110 FH Omit Omit/Reistate 571 FB Reistate Omit/Reistate 571 FU 09 Medical Alarm Priorit Alarm 100 MA Alarm Restore Restore 100 MH Omit Omit/Reistate 572 MB Reistate Omit/Reistate 572 MU 10 24Hr Gas Alarm Alarm Tamper 151 GA Alarm Restore Restore 151 GH Omit Omit/Reistate 572 GB Reistate Omit/Reistate 572 GU 116 INS176-15

117 Premier Elite Series Istallatio Maual UDL & Digi Optios No Zoe Tpe Evet Reportig Group Cotact ID SIA 11 Auxiliar Alarm Alarm Tamper 150 UA Alarm Restore Restore 150 UH Omit Omit/Reistate 572 UB Reistate Omit/Reistate 572 UU 12 24Hr Tamper Alarm Alarm Tamper 137 TA Alarm Restore Restore 137 TR Omit Omit/Reistate 572 TB Reistate Omit/Reistate 572 TU 13 Exit Termiator Alarm Ope/Close Alarm Restore Ope/Close Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 14 Keswitch - Mometar Alarm Ope/Close 409 OP Alarm Restore Ope/Close 409 CL Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 15 Keswitch - Latchig Alarm Ope/Close 409 OP Alarm Restore Ope/Close 409 CL Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 16 Securit Ke Alarm Ope/Close 421 DK Alarm Restore Ope/Close 421 DG Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 17 Omit Ke Alarm Omit/Reistate Alarm Restore Omit/Reistate Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 18 Custom Alarm Omit/Reistate Alarm Restore Omit/Reistate Omit Omit/Reistate 570 UB Reistate Omit/Reistate 570 UU 19 Cofirmed PA Audible Alarm Priorit Alarm 123 PA Alarm Restore Restore 123 PH Omit Omit/Reistate 573 PB Reistate Omit/Reistate 573 PU 20 Cofirmed PA Silet Alarm Priorit Alarm 122 HA Alarm Restore Restore 122 HH Omit Omit/Reistate 573 HB Reistate Omit/Reistate 573 HU INS

118 UDL & Digi Optios Premier Elite Series Istallatio Maual No-Zoe Evet Tpes The default No-Zoe Evet codes are as follows: No Tpe Evet Reportig Group Cotact ID SIA ID 22 Kepad Medical Alarm Priorit Alarm 100 MA Kepad No * Restore Restore 100 MH Kepad No * 23 Kepad Fire Alarm Priorit Alarm 115 FA Kepad No * Restore Restore 115 FH Kepad No * 24 Kepad Audible PA Alarm Priorit Alarm 120 PA Kepad No * Restore Restore 120 PH Kepad No * 25 Kepad Silet PA Alarm Priorit Alarm 122 PA Kepad No * Restore Restore 122 PH Kepad No * 26 Duress Code Alarm Alarm Priorit Alarm 121 HA User No Restore Restore HH User No 27 Alarm Active Alarm Not Reported Restore Not Reported Bell Active Alarm Not Reported Restore Not Reported Zoes Locked Out Alarm Alarm 570 BB Zoe No Restore Alarm 570 BU- Zoe No- 30 Verified Cross Zoe Alarm Alarm Alarm 130 BV 00 Restore Not Reported User Code Alarm Not Reported - - User No Restore Not Reported Exit Started Alarm Not Reported - - Kepad No Restore Not Reported Exit Error (Armig Failed) Alarm Ope/Close 457 EE 00 Restore Ope/Close Etr Started Alarm Not Reported Restore Not Reported Area Arm Suite Alarm Ope/Close - - Suite No 1-8 Restore Ope/Close Armed with Lie Fault Alarm Not Reported - - User No Restore Not Reported Ope/Close (Full Arm) Alarm Ope/Close 401 OP User No Restore Ope/Close 401 CL User No 38 Ope/Close (Part Arm) Alarm Ope/Close 401 OP User No Restore Ope/Close 401 CL User No 39 Auto Ope/Close Alarm Ope/Close 403 OA 00 Restore Ope/Close 403 CA Auto Arm Deferred Alarm Ope/Close 405 CE User No Restore Ope/Close Ope After Alarm (Alarm Abort) Alarm Ope/Close 406 OR 00 Restore Not Reported Remote Ope/Close Alarm Ope/Close 407 OP 00 Restore Ope/Close 407 CL Quick Arm Alarm Not Reported Restore Ope/Close 408 CL Kepad No * 44 Recet Closig Alarm Ope/Close 459 CR 00 Restore Not Reported Reset After Alarm Alarm Restore - - Reset ID **** Restore Not Reported Power Output Fault Alarm Maiteace 300 YP Device ID ** Restore Restore 300 YQ Device ID ** 47 AC Fail Alarm Maiteace 301 AT 00 Restore Restore 301 AR INS176-15

119 Premier Elite Series Istallatio Maual UDL & Digi Optios No Tpe Evet Reportig Group Cotact ID SIA ID 48 Low Batter Alarm Maiteace 302 YT 00 Restore Restore 302 YR Sstem Power Up Alarm Maiteace 305 RR 00 Restore Not Reported Sstem Over Voltage Alarm Maiteace 321 YA 00 Restore Restore 321 YH ATS Path Fault Alarm Maiteace 351 LT Lie Fault ID *** Restore Restore 351 LR Lie Fault ID *** 52 Fail to Commuicate Alarm Not Reported Restore Maiteace 354 YC Dowload Start Alarm Maiteace 411 RB 00 Restore Not Reported Dowload Ed Alarm Maiteace 412 RS - Restore Not Reported Log Capacit Alert (80%) Alarm Maiteace 623 JL 00 Restore Not Reported Date Chaged Alarm Maiteace 625 JD User No Restore Not Reported Time Chaged Alarm Maiteace 625 JT User No Restore Not Reported Istaller Programmig Start Alarm Maiteace 627 LB User No Restore Not Reported Istaller Programmig Ed Alarm Maiteace 628 LS User No Restore Not Reported Pael Box Tamper Alarm Tamper 145 TA 00 Restore Restore 145 TR Bell Tamper Alarm Tamper 145 TA Device ID ** Restore Restore 145 TR Device ID ** 62 Auxiliar Tamper Alarm Tamper 145 TA Device ID ** Restore Restore 145 TR Device ID ** 63 Expader Tamper Alarm Tamper 145 TA Device ID ** Restore Restore 145 TR Device ID ** 64 Kepad Tamper Alarm Tamper 145 TA Kepad No * Restore Restore 145 TR Kepad No * 65 Expader Trouble (Network Error) Alarm Tamper 333 ET Device ID ** Restore Restore 333 ER Device ID ** 66 Kepad Trouble (Network Error) Alarm Tamper 333 ET Kepad No * Restore Restore 333 ER Kepad No * 67 Fire Zoe Tamper Alarm Tamper 373 FT Zoe No Restore Restore 373 FJ Zoe No 68 Zoe Tamper Alarm Tamper 383 TA Zoe No Restore Restore 383 TR Zoe No 69 Kepad Lockout Alarm Tamper 145 JA Kepad No * Restore Not Reported Code Tamper Alarm Alarm Tamper 145 JA Kepad No * Restore Not Reported Soak Test Alarm Alarm Test - - Zoe No Restore Restore - - Zoe No 72 Maual Test Call Alarm Test 601 RX 00 Restore Not Reported Automatic Test Call Alarm Test 602 RP 00 Restore Not Reported User Walk Test Start/Ed Alarm Test 607 TS User No Restore Restore 607 TE User No INS

120 UDL & Digi Optios Premier Elite Series Istallatio Maual No Tpe Evet Reportig Group Cotact ID SIA ID 75 NVM Defaults Loaded Alarm Not Reported - - Zoe No Restore Not Reported - - Zoe No 76 First Kock Alarm Not Reported Restore Not Reported Door Access Alarm Not Reported Restore Not Reported Part Arm 1 Alarm Not Reported Restore Close 401 CL User No 79 Part Arm 2 Alarm Not Reported Restore Close 401 CL User No 80 Part Arm 3 Alarm Not Reported Restore Close 401 CL User No 81 Auto Armig Start Alarm Not Reported Restore Not Reported Cofirmed Alarm Alarm Alarm 139 BV Zoe No Restore Not Reported Prox TAG Alarm Not Reported Restore Not Reported Access Code Chaged/Deleted Alarm Not Reported Restore Not Reported Arm Failed Alarm Not Reported Restore Not Reported Log Cleared Alarm Not Reported Restore Not Reported id Loop Shorted Alarm Tamper 145 TA 000 Restore Restore 145 TR - 88 Commuicatio Port Alarm Maiteace Restore Restore TAG Sstem Exit (Batt. OK) Alarm Not Reported - - Zoe No Restore Not Reported - - Zoe No 90 TAG Sstem Exit (Batt. LOW) Alarm Not Reported Restore Not Reported TAG Sstem Etr (Batt. OK) Alarm Not Reported Restore Not Reported TAG Sstem Etr (Batt. LOW) Alarm Not Reported Restore Not Reported Microphoe Activated Alarm Not Reported Restore Not Reported AV Cleared Dow Alarm Not Reported Restore Not Reported Moitored Alarm Alarm Alarm 220 BA Zoe No Restore Restore 220 BH Zoe No 96 Expader Low Voltage Alarm Maiteace 143 ET Device No Restore Restore 143 ER Device No 97 Supervisio Fault Alarm Maiteace 355 UT Zoe No Restore Restore 355 UJ Zoe No 98 PA From Remote FOB Alarm Priorit Alarm 121 HA Restore Priorit Alarm 121 HH 99 RF Device Low Batter Alarm Maiteace 384 XT Zoe/User No Restore Restore 384 XR Zoe/User No 100 Site Data Chaged Alarm Maiteace Restore Restore Radio Jammig Alarm Maiteace 344 XQ 000 Restore Maiteace 344 XH INS176-15

121 Premier Elite Series Istallatio Maual UDL & Digi Optios No Tpe Evet Reportig Group Cotact ID SIA ID 102 Test Call Passed Alarm Not Reported Restore Not Reported Test Call Failed Alarm Not Reported Restore Not Reported Zoe Fault Alarm Maiteace 380 BT Zoe No Restore Maiteace 380 BJ Zoe No 105 Zoe Masked Alarm Maiteace 380 BT Zoe No Restore Maiteace 380 BJ Zoe No 106 Faults Overridde Alarm Maiteace Restore Not Reported PSU AC Fail Alarm Maiteace 301 AT Device No Restore Restore 301 AR Device No 108 PSU Low Batter Fail Alarm Maiteace 302 YT Device No Restore Restore 302 YR Device No 109 PSU Low Output Fail Alarm Maiteace 300 YP Device No Restore Restore 300 YQ Device No 110 PSU Tamper Alarm Tamper 145 TA Device No Restore Tamper 145 TR Device No 111 Door Access Alarm Ope 422 DG Device No Restore Not Reported CIE Reset Alarm Maiteeace 305 RR 000 Restore Not Reported Remote Commad Via Com Port 114 User Added Alarm Not Reported Restore Not Reported User Deleted Alarm Not Reported Restore Not Reported Cofirmed PA Alarm Priorit Alarm 129 HV Zoe No Restore Not Reported User Ack Alarm Not Reported - - Restore Not Reported Power Uit Failures Alarm Maiteace Alarm - YP - Restore Maiteace Restore - YQ Charger Fault Alarm Maiteace Alarm - YP - Restore Maiteace Restore - YQ Cofirmed Itruder Alarm Priorit Alarm 139 BV Zoe No Restore Priorit Alarm 139 BR Zoe No 121 GSM Tamper Alarm Maiteace 145 TA 00 Restore Maiteace 145 TR Radio Cofig Failure Alarm Not Reported Restore Not Reported Auxiliar Fault Alarm Maiteace 328 YA 00 Restore Maiteace 328 YH Batter Replacemet Alarm Not Reported Restore Not Reported 125 Port Forwardig Alarm Maiteace 666 UN Restore Maiteace 666 UP 126 Mode Activatio Alarm Ope 667 AM Restore Close 667 DM 127 Recipe Trigger Alarm Ope 668 RA Restore Close 668 RD INS

122 UDL & Digi Optios Tamper Fault ID *** Pael ID is trasmitted as follows: Device ID Pael 000 Kepad ID is trasmitted as follows: Network RKP Expader ID is trasmitted as follows: Network EXP ATS Path Fault ID *** Lie Fault ID is trasmitted as follows: Device ID Pael 00 RedCARE 01 Com 300/Com Com IP 002 Expader ID is trasmitted as follows: Network EXP Reset ID **** Reset ID is trasmitted as follows: Device Premier Elite Series Istallatio Maual ID Pael (RR) 00 Egieer 01 Ati-Code 02 RedCARE 03 Keswitch 04 User 05 Witex 07 Expader ID is trasmitted as follows: Network EXP Power Fault ID **** Reset ID is trasmitted as follows: Device Bell Uder Voltage 00 Digi Uder Voltage 01 Sstem Uder Voltage 02 Aux Uder Voltage 03 Batter Uder Voltage 04 Network 1 Uder Voltage 05 Network 2 Uder Voltage* 06 Network 3 Uder Voltage** 07 Network 4 Uder Voltage** 08 Network 5 Uder Voltage** 09 Network 6 Uder Voltage** 10 Network 7 Uder Voltage** 11 Network 8 Uder Voltage** 12 *168 & 640 Ol **640 Ol ID 122 INS176-15

123 Premier Elite 12,12-W,24,24-W, 48,48-W, 88, 168 & 640 Istallatio Maual Setup Users 5.8 Setup Users O Use eoe ciae eice E o elec: ep Uses A dd o Use? =e =Ipo 1 2 II ese o II ese o ep Uses Use: ep Uses Ee Use: R o o a o EEE Use? llo ig Ee Use ode Ee Use ode 34 o es o es Use eas < 2 Use eas < hage ode Use pe o I Use 2 Use pe aage se es se ess Use oo l < Use oced ie 5 Use oced ie 5 Use oo l < Use ae is: ^Edi e laie Edi e ^ dd o Use? =e =Ipo II ese o II ese o Use ea < CP Use ea < A Zoe eas IJK INS

124 Setup Users Default User Codes Whe the cotrol pael is first powered up ad the factor default settigs are loaded (see page 48 for details), ol the Egieer code ad the Master User code exist. The Factor default Egieer User code is. The Egieer is alwas User 00. If the Egieer code has bee lost or forgotte, it ca ormall be reset back to the factor default without havig to reprogram the etire sstem (see page 53 for details). Resettig the Egieer code is ol possible if the NVM has ot bee locked (see page 71 for details). The Factor default Master User code is. The Master User is alwas User 01. If the Master User code has bee lost or forgotte, it ca be reprogrammed b the Egieer i this meu. Programmig New Users Each User code o the sstem is made up of the followig elemets. Items 1, 2 or 8, 3 ad 4 which are essetial for the code to fuctio correctl ad items 5, 6, 7, 8 ad 9 which are optioal. 1. User Number Whe users are assiged to the sstem, the eed to be idetified b the cotrol pael. Each user is idetified as Users 01, 02, 03 etc. User 01 is alwas the Master User. 2. User Code This is a uique 4, 5 or 6 digit code umber that is assiged to a user. The sstem will allow a mixture of differet legth User codes. The User code must be etered at a kepad to operate the alarm sstem. There is a programmable Black List of baed user codes which ca be set ad edited via Witex UDL software. 3. User Areas A umber of areas ca be assiged to the selected user. Assigig areas to a user determies which areas ca be armed, disarmed, reset etc. b that user. I additio, assigig areas to a user determies which of the area related fuctios i.e. omittig zoes, silet armig etc. will be available to that user. 4. User Tpes The User tpe determies which fuctios are available to the user i.e. armig, disarmig, resettig etc. I additio, the User tpe also determies which optios the user ca access i.e. Setup Users, Sstem Tests etc. 5. User Time Lock This optio allows the selected user to be deied access to the sstem at differet times of the da ad das of the week. Whe a Cotrol Timer is assiged to a user, the User code will ot allow access to a fuctios durig the timers O period. 6. User Name Text Each user ca be assiged up to 8 characters of ame text. The ame text is displaed wheever a code is etered ad also whe readig the log, makig idetificatio of people usig the alarm easier. 7. Door Cotrol This optio would ormall be used for access cotrol. Users are able to ope/ulock doors that are assiged to their user code. 8. Proximit TAG As well as or istead of operatig the alarm sstem with a code umber, it is also possible to operate it b presetig a Proximit TAG to the kepad (this requires a Proximit kepad). User Tpes Premier Elite Series Istallatio Maual The User tpe determies which fuctios are available to the user i.e. armig, disarmig etc. I additio, the User tpe also determies which optios the user ca access i.e. Setup Users etc. The followig User tpes are available: 0: Egieer Egieers ca arm, disarm, omit zoes, silece alarms ad reset their assiged areas. I additio, Egieers ca access the Programmig Meu ad all User meu optios. Egieers ca also chage their ow User codes ad assig ew users to the sstem. The default Egieer User tpe (User 00) ca assig a User tpes to the sstem. Egieers ca ol disarm areas that were armed usig a Egieer code. The caot disarm a areas that were armed with aother User code. 1: Master Master users ca arm, disarm, omit zoes, silece alarms ad reset their assiged areas. I additio, Master users ca access all User meu optios. Master users ca also chage their ow User codes ad assig ew users to the sstem. The Master user will also activate a output programmed as Door Strike. Master Users ca eable the Texecom Coect app, view the Uique Id ad whe authorised b a egieer replace batteries i Ricochet devices. 2: Maager Maager users ca arm, disarm, omit zoes, silece alarms ad reset their assiged areas. I additio, Maager users ca access all User meu optios except Setup Users. Maager users ca also chage their ow User codes. 3: Stadard Stadard users ca arm all the areas assiged to the code ad disarm all the areas assiged to the code (eve if ol oe area is i etr or alarm) from a kepad, omit zoes, silece alarms ad reset their assiged areas. I additio, Stadard users ca access all User meu optios except for Setup Users, Sstem Tests, ad Chage Timers. Stadard users ca also chage their ow User codes. 4: Local Local users behave the same wa as Stadard users. However, Local users will ol arm the area that the kepad is assiged to ad disarm the area that is i etr or alarm (provided that the code has that area assiged to it 5: Duress Duress users behave the same wa as Stadard users. However, Duress users will activate a outputs programmed as Paic Alarm or Duress wheever their code is etered. Duress users ca ol be set up b a Egieer if sstem is set to Grade 3 see cofiguratio optio 37. 6: Arm Ol Arm Ol users ca ol arm or reset their assiged areas ad view the evet log. 7: Door Strike Door Strike users have o access to User fuctios or Meu optios. However, Door Strike users will activate a outputs programmed as Door Strike wheever their code is etered (see page 87 for details). 8: Vacatio Vacatio users behave the same wa as Stadard users. However, Vacatio users will automaticall be deleted the first time that the Master User code (User 01) is used to disarm the sstem. Vacatio user ca ol be deleted b the Master user after it has bee used to disarm the sstem at least oce. 9: Custom Custom users ca access a fuctios ad User meu optios that have bee assiged to them i User Optios 1 or 2 ad User Cofig. This flexibilit allows ew User tpes to be created that have their ow uique set of characteristics. A umber of Custom users ca be assiged to the sstem ad each oe will respod differetl, 124 INS176-15

125 Premier Elite Series Istallatio Maual depedig o the fuctios ad features that have bee assiged to them. Setup Users 10: Prevet Uset Whe this user tpe is selected ad is used to Arm a sstem or Area, it will ot be possible for a other user to disarm the sstem. Attributes for this user tpe are idetical to a Master User. User Fuctios ad Optios The table below shows the optios that are available to each user. All users that have access to the Armig Meu have the abilit to View Zoe Status, Set Chime Areas, View Act. Faults ad View Act. Couts. All users have access to the User Meu have the abilit to View Evet Log, Adjust Volumes ad Prit Evet Log. User Optios 1 Egieer Master Maager Stadard Local Duress Arm Ol Door Strike Vacatio Custom Prevet Uset Armig Armig Armig Armig Armig Armig Armig - Armig - Armig Disarmig Disarmig Disarmig Disarmig Disarmig Disarmig - - Disarmig - Disarmig Omittig Omittig Omittig Omittig Omittig Omittig - - Omittig - Omittig Eg. Reset Local Armig Local Disarm Disarm First Disarm First Disarm First Disarm First Disarm First Disarm First - - Disarm First - Disarm First User Optios 2 User Meu User Meu User Meu User Meu User Meu - User Meu - User Meu - User Meu Eg. Program Vacatio - - Door Strike Door Strike Door Strike - - Door Strike Call Rem. PC Call Rem. PC Call Rem. PC Call Rem. PC Duress Code Ope/Close Ope/Close Ope/Close Ope/Close Ope/Close Ope/Close Ope/Close - Ope/Close - Ope/Close User Cofig. Egieer Master Maager Stadard Local Duress Arm Ol Door Strike Vacatio Not Used Prevet Uset Chage Code Chage Code Chage Code Chage Code Chage Code Chage Code Chime Zoes Chime Zoes Chime Zoes Chime Zoes Chime Zoes Chime Zoes Chage Timer Chage Timer Chage Timer Chage Timer Sstem Tests Sstem Tests Sstem Tests Sstem Tests Setup Users Setup Users Setup Users Eg. Access Eg. Access Eg. Access Eg. Access Eg. Access - Eg. Access - Eg. Access - Eg. Access Add Eg. code NVM Lockig INS

126 Setup Users User Optios 1 This meu defies which optios are available to the user whe their code is etered. Press to scroll through the optios ad press to select them or use kes 1-8 ( Letter = optio IS selected, Star = optio is NOT selected). The followig optios are available: A - Armig Areas assiged to the selected user ca be armed. D - Disarmig Areas assiged to the selected user ca be disarmed. O - Omittig Zoes assiged to the same areas as the selected user ca be omitted, providig that the have the omit attribute assiged to them. R - Eg. Reset (Egieers ol) Areas programmed as Egieer reset ca be reset after a Alarm has occurred. a - Local Armig The User ca ol arm areas that the kepad is assiged to. d - Local Disarm The User ca ol disarm areas that the kepad is assiged to, or areas that are i etr or alarm (provided that the code has that area assiged to it). Y - Auto YES After a User code has bee etered, pressig the ke to cofirm the ext actio is ot required. F - Disarm First If a area is alread armed ad the selected user eters their code, the Disarm optio is displaed. User Optios 2 This meu is ol displaed if the Custom User tpe is selected (see page 125 for details). This meu defies which optios are available to the user whe their code is etered. Press to scroll through the optios ad press to select them or use kes 1-8 ( Letter = optio IS selected, Star = optio is NOT selected). The followig optios are available: U - User Meu The selected user has access to the User meu. However, the selected user will ol have access to optios assiged i User Cofig. (see page 126 for details). E - Eg. Program (Egieers ol) Ol Available to Egieers. D - Dual Code The selected user ca ol access a area whe a secod User code (with the Dual Code attribute ad also assiged to the same area) is etered. Dual Code users will also activate the 1 st ad 2 d Code output tpe. V - Vacatio The selected user is eabled the first time it is used to disarm the sstem ad ca be used as ma times as required. However, it will be automaticall deleted the first time that the User 01 code is used to disarm. Vacatio users will ol be deleted b the Master user, oce the have bee used o the sstem. S - Door Strike The selected user will activate a outputs programmed as Door Strike, wheever their codes are etered. Premier Elite Series Istallatio Maual R - Call Rem. PC The selected user has access to the Call Remote PC optio, allowig them to iitiate a call to a remote upload/dowload PC. C - Duress Code The selected user will activate a outputs programmed as Duress, wheever their codes are etered. O - Ope/Close The selected user will report ope (disarm) ad close (arm) evets to a Alarm Receivig Cetre ever time the arm or disarm. User Cofig. This meu will ol be displaed if a Custom User tpe is selected AND User Meu (User Optio: U) is eabled (see page 126 for details). This meu defies which meu optios are available to the user whe their code is etered. Press to scroll through the optios ad press to select them or use kes 1-8 ( Letter = optio IS selected, Star = optio is NOT selected). The followig optios are available: C - Chage Code The selected user ca chage their ow User code. Z - Chime Zoes The selected user ca access the Edit Chime Zoes optio, allowig them to select which zoes chime whe activated. T - Chage Timers The selected user ca access the Override Timers, Alter Timers, Alter Part Arms, Alter Hol. Dates ad Edit Phoe No. meu optios. S - Sstem Tests The selected user ca access the Sstem Tests optio, allowig them to walk test zoes, activate the exteral souder etc.. U - Setup Users The selected user ca access the Setup Users optio, allowig them to alter existig users or assig ew users. However, users caot assig User tpes to the sstem that have a higher access level tha themselves. Also, if a user assigs a Custom User tpe, fuctios that are ot available to them caot be assiged to the Custom user. E - Eg. Access The selected user ca access the Eable Egieer optio, allowig them to authorise Egieer access or Remote UDL access to the sstem. A - Add Eg. Code (Egieers ol) Ol Available to Egieers. N - NVM Lockig (Egieers ol) Ol Available to Egieers. User Time Lock This optio allows the selected user to be deied access to the sstem at differet times of the da ad das of the week. Whe a Cotrol Timer is assiged to a user, the User code will ot allow access to a fuctios durig the timer O period (see page 75 for timer programmig). The first 4 optios (48) or 6 optios (88/168) will lockout the selected user (Code ad TAG) whe the correspodig cotrol timer is active. The last two optios will lock out the selected users TAG (T) whe Custom Output 2 Stage A is active or lock out the selected users Code (C) whe Custom Output 2 Stage B is active. This allows coditios to be set up i the custom outputs ad the the TAG or Code to be locked out durig those coditios i.e. Custom Output 2 Stage B could be programmed to activate durig etr, resultig i the code beig disabled durig the etr period. 126 INS176-15

127 Premier Elite Series Istallatio Maual User Name Text Each user ca be assiged up to 8 characters of ame text. This ca be beeficial whe readig the log, as idetificatio of people is made easier. See page 53 for details o programmig text. Text is programmed i a similar wa to mobile phoes. Select characters b pressig the correspodig ke the appropriate umber of times (to select a character o the same ke, press the ke to move the cursor alog). Door Cotrol This optio would ormall be used for access cotrol as it ol allows the user to ope/ulock doors that are assiged to that user code. Door cotrol is ol available to users with the Door Strike attribute assiged to it. Addig Tags Whe usig a Proximit Kepad, Tags ca be programmed or imported from aother pael. Whe prompted, select 1 to add ew Tag or 2 to import a Tag from aother sstem. Tags ca be imported from a other pael to a user ad it is possible to import Tags from several other paels. Deletig Users If a User code eeds to be deleted from the sstem, this must be doe, b a user that has access to the Setup Users meu. To delete User codes proceed as follows: Esure that Setup Users is selected, the displa should look like this: o o a o ep Uses? Press, the displa should look like this: ep Uses Ee Use Select a user from 1 to 24 (48), 1 to 49 (88) or 1 to 199 (168) the press, the displa should look like this: Ee Use ode Setup Users SmartKe will use for its routeig, LED ad Aux fuctios ca also be chaged withi the Setup Users meu. All users o the sstem ca have a Premier Elite SmartKe a TAG ad a code, or a combiatio of them. This sectio ol deals with Premier Elite SmartKe learig ad routeig, all other user programmable optios ca be foud i INS467 Premier Elite Series 8/32XP-W Istallatio Maual. Great care should be take whe usig large umbers of Premier Elite SmartKe, ol oe Premier Elite SmartKe per expader ca be used b the sstem at a oe time, ad o Multiple expaders sstems, or large sites, fuctioalit should be checked i all areas of the site where the device ma be used. Premier Elite SmartKe Routig Premier Elite SmartKe should ol be leared to the sstem AFTER all devices have bee leared ad placed i their fial locatio. Whilst it is possible to lear at a poit durig the programmig of the sstem, learig ad testig the fuctioalit of the Premier Elite SmartKe after all devices have bee placed will esure that the Premier Elite SmartKe performs as expected, ad works i locatios where the user would expect it too. Route B The Route B fuctio allows ou to select which Zoes (ad therefore expader) the Premier Elite SmartKe will use o the sstem for its routeig. This should be selected BEFORE the device has bee leared. I the examples below Fig 1 shows the zoes associated with Expader 1, which is a 32XP-W, ad Fig 2 shows Expader 2 which is also a 32XP-W, whe usig 8XP-W there willobviousl be less devices that the Premier Elite SmartKe ca use. Use oe Zoes 4 Use oe Zoes 4 7 Fig 1 Fig 2 The A ke is used to select this meu ad the ke used to select which expader ad associated zoes will be used Oce a Premier Elite SmartKe has bee leared the A ke will show which zoes are beig used for routeig. It is ot possible to alter this oce leared. To chage the routeig the Premier Elite SmartKe should be deleted ad the process started from the begiig. Deletig a Premier Elite SmartKe Deletig the Premier Elite SmartKe from the user is a similar process to learig, at the appropriate poit i the meu press N followed b R, the Premier Elite SmartKe will be removed from the User. To delete all user data see INS176-8 or later. Press R, the displa will look somethig like this: o o a o EEE Use Where 15 is the selected User umber. Press to cofirm deletio of the selected User code Press N to exit from Setup Users Addig SmartKe Itroductio Premier Elite SmartKe are ow leart ad all fuctioalit maaged through the Setup Users Meu. Ricochet V2 ad Premier Elite Series V2 firmware upgrades add additioal capabilities to the maagemet of Premier Elite SmartKe. I multiple expader sstems it is ow possible to choose which zoes (ad therefore expader) the Premier Elite E o elec: ep Uses ep Uses Use: INS O Use icoche ee Use icoche eaig s Use icoche o E Use icoche o R N A 1 2 A Use oe Zoes 4 Use oe Zoes 4

128 Egieer Utilities Premier Elite Series Istallatio Maual 5.9 Egieer Utilities View Evet Log E o elec: Egiee Uils Egiee Uils ie Ee og =Ee =la 3=adao og 1 :84 /3 ode aid :84 /3 C ode Joh :84 /3 A ode aid ea: P ode aid ea: N The cotrol pael has three Evet Logs, which are time ad date stamped. The first log which is a sstem log, records all evets that occur o the sstem, i.e. Users eterig their codes to arm or disarm areas, alarm evets, failures to arm etc. The secod log which is a alarm log, ol records alarm evets that occur o the sstem. The third log is the Madator Evet log which records ol evets defied as madator b EN The Sstem Log records the last 500 (48), 1000 (88) or 2000 (168) evets. The Alarm Log records the last 32 alarm evets. The Madator Log records the last 500 madator evets. Evet Log Hotkes Whe viewig the sstem log there are 9 hotkes available. These hotkes allow certai evets to be foud easier without the eed for searchig. The followig hotkes are available: 1 = Priorit Alarms (PA, Fire etc.) = Normal Alarms (Guard, 24hr, Etr/Exit etc.) = Opes ad Closigs (Arm, Disarm etc.) = Omits ad Reistates (Zoe Omits etc.) = Maiteace (Sstem Tests, Egieer Program etc.) = Tampers (Zoe, Bell, Aux etc.) = Test Calls (Commuicator Active, successful etc.) = Etr/Exit (Etr ad Exit Procedures) 0 = User Codes (User codes beig used) 128 INS176-15

129 Premier Elite Series Istallatio Maual Egieer Utilities Evet Log Descriptios Log Evet Descriptio ### ARM FAILED A exit fault from Zoe ### has caused the sstem to fail to arm ### Flt Alarm Zoe ### has detected a Fault coditio ### Mask Alarm Zoe ### has detected a Mask coditio ### Test Failed Maual or Periodical Test Call has failed o commuicatio device ### ### Tested OK Zoe ### has activated durig the walk test #,# RESET AREAS - Area have bee reset usig kepad #,# followig a Itruder alarm AC Off Alarm The cotrol pael has detected a AC Mais failure ALARM ABORT A Ope After Alarm-Abort has occurred for area? ALARM Active A Itruder alarm sigal has bee activated for area? Ati-Code Reset A reset has bee performed usig the Ati-code reset procedure AREA Armed Area? has bee armed AREA Disarmed Area? has bee disarmed ARMED WITH L/F The sstem has bee armed with a Lie Fault coditio preset ARMING FAILED A Exit Error-Arm Fail has occurred o area? ARMING SUITE # Area Arm Suite # was used to arm the sstem ATS FAILED The Commuicator has failed to report to the Alarm Receivig Cetre ATS FLT Alarm There is a problem with the telephoe lie AUTO TEST CALL A Automatic test call has bee iitiated AUX #,# Tamper A Auxiliar Tamper iput from device #,# has bee activated AUX #,# Fault A Auxiliar Fault iput from device #,# has bee activated AV CLEARED b ## The Audio Verificatio uit has bee cleared dow b user ## BELL #,# Tamper A Bell Tamper iput from device #,# has bee activated BELL Active The Bell output has bee activated for area? BELL FUSE Alarm The cotrol pael Bell Fuse has failed BOX LID Tamper The cotrol pael lid has bee removed causig a Tamper alarm CHARGER FAULT Batter Charge Curret has Failed CIE Reset The iteral processor has failed its self checks. CODE #,# Tamper Too ma ivalid ke presses have caused a tamper alarm from kepad #,# Com??? Lie Fault The Com300, 2400 or ISDN has detected a lie fault COM PORT Alarm A com port has geerated a alarm COM 3 Fault Premier Elite & 88 Com300/ 2400/ComPort + plugged o icorrectl or the port is programmed icorrectl. CONFIRMED ALARM Two or more detectors have activated, resultig i a cofirmed alarm coditio CONFIRMED PA Two or more PA zoes have activated, resultig i a cofirmed PA alarm coditio CONFIRMED INTRUDER Two or more detectors have activated, resultig i a cofirmed Itruder coditio CORRUPT EVENT No evet has bee stored i memor CROSS ### Alarm A Verified Cross Zoe (Beam Pair) Alarm has occurred from zoe ### DATA CHANGED Programmig data has bee chaged DATE CHANGED The cotrol pael Time has bee chaged DEFAULTS LOADED The factor default values have bee loaded ito memor DEFERRED The armig mode was deferred for area? DOOR #,# Door #,# has bee opeed b a user with Door Cotrol DOWNLOAD START A Upload/Dowload has bee iitiated DOWNLOAD END The Upload/Dowload has fiished DURESS User ## has etered a Duress Code at a kepad Egieer Reset A reset has bee performed usig a Egieers code ENTRY Area ## The Etr mode has bee started for area? EXIT Area ## The Exit mode has bee started for area? EXP #,# Reset A reset has bee performed usig the iput o expader #,# (programmed as reset) EXP #,# Lie Fault The Iput o expader #,# (programmed as lie fault) has bee activated EXP #,# LOST Expader ## has bee lost from the etwork EXP #,# Tamper The cover of expader #,# has bee removed EXP ## Low Voltage Expader #,# has detected that its suppl voltage is low F_PA ## A Paic Alarm from a Radio FOB has bee geerated Fault Override The sstem has bee armed with a Fault coditio preset b a user FIRE ### Active Zoe ### (programmed as Fire Alarm) has caused a alarm FIRE ### Tamper Zoe ### (programmed as Fire Alarm) has caused a Tamper alarm FIRST KNOCK ### Zoe ### (which is programmed as double kock) has activated for the first time FUSE #,# Alarm The Auxiliar 12V Fuse i device #,# has failed GSM MODULE LOST The GSM Module has lost commuicatios with the cotrol pael id Loop# Tamper There is a short circuit o id loop # o the id expader Ke switch Reset A reset has bee performed usig a ke switch KSW ### Disarmed A Keswitch zoe tpe has bee activated (zoe umber ###) LOG ALERT 80% of the Evet Log has filled (sice the last Upload/Dowload) LOG CLEARED The evet log has bee erased LOW BAT Alarm The cotrol pael has registered a low batter coditio LOW V #,# Alarm Expader #,# has detected that s its suppl voltage is low MANUAL TEST CALL A Maual test call has bee iitiated MIC ## TESTED Microphoe ## o the Audio Verificatio Module has bee tested Moitored Alarm A zoe programmed as ke tube has caused a alarm No RF Sigal ### The Wireless receiver has detected a sigal loss from zoe ### PA From Remote FOB A PA has bee geerated from a Remote Fob Pael Lie Fault The cotrol pael lie fault iput has bee activated PART Armed Area? has bee Part Armed PART 1 Armed Part Arm 1 has bee selected PART 2 Armed Part Arm 2 has bee selected PART 3 Armed Part Arm 3 has bee selected Port Forwardig Success The pael has opeed the programmed port o the router Port Forwardig Failed The pael has ot opeed the programmed port o the router POWERED UP Sstem Power Up (without doig a factor restart) POWER O/P FAULT The sstem has geerated a Power Output Fault see Table Power ID Fault o Page 98 POWER UNIT FAILURE The sstem has geerated a rate of voltage failure PROG. END The Egieer has logged out of the Programmig meu INS

130 Egieer Utilities Premier Elite Series Istallatio Maual Log Evet Descriptio PROG. START A Egieer code has bee etered PSUac ## Alarm A expader iput programmed as PSU Moitor cotrol pael has detected a AC Mais failure PSUbat## Alarm A expader iput programmed as PSU Moitor cotrol pael has detected a Batter fault PSUvol## Alarm A expader iput programmed as PSU Moitor cotrol pael has detected a 12V Output failure PSUTam## Alarm A expader iput programmed as PSU Moitor cotrol pael has detected a Tamper coditio QUICK Armed Quick Arm from kepad #,# R/Bat ## Alarm The Wireless receiver has detected a low batter sigal from device ## Radio Jammig The Wireless receiver has detected a attempt to jam its radio sigal RADIO PAD LOST The Radio-Pad has o sigal or has lost commuicatios with the cotrol pael REARM LOCK ### Zoe ### has locked out after reachig its re-arm limit (after causig a alarm) RECENT Armed Area? has bee armed recetl Redcare Lie Fault The Redcare has detected a lie fault REMOTE Armed Area? was armed usig the Witex UDL software REMOTE Disarmed Area? was disarmed usig the Witex UDL software Remote PC Reset A reset has bee performed b the remote dowload PC Remote Reset A reset has bee performed usig the Remote Reset iput Redcare Reset A reset has bee performed b the Redcare RF Device ###Low Batter RF Device ### has registered a low batter coditio RKP #,# MEDICAL A Medical alarm (7 & 9) has occurred from kepad umber #,# RKP #.# FIRE A Fire alarm (4 & 6) has occurred from kepad umber #,# RKP #,# AUD PA A Audible PA alarm (1 & 3) has occurred from kepad umber #,# RKP #,# SIL PA A Silet PA alarm (1 & 3) has occurred from kepad umber #,# RKP #,# Tamper The cover of kepad #,# has bee removed RKP #,# LOST Kepad ## has bee lost from the etwork RKP LOCKED #,# Kepad #,# has bee locked out from too ma ivalid ke presses Site Data Chaged Site Data has bee chaged e.g. zoe ### has bee chaged Supervisio Fault A Radio device has failed to poll back to the pael withi the Supervisio Time Sstem Over Voltage The cotrol pael Bell Fuse has failed TAG ## User ## has preseted their Prox TAG Test Call Passed Maual or Periodical Test Call has passed Test Call Failed Maual or Periodical Test Call has failed TESTED ### Zoe ### has bee tested TEST FAIL ###) Zoe ### has failed its Soak test TAG Sstem Exit (Batt. OK) The sstem has bee put i to exit via tag ad batter voltage is ok TAG Sstem Exit (Batt. Low) The sstem has bee put i to exit via tag ad batter has low voltage TAG Sstem Etr (Batt. OK) The sstem has bee put i to etr via tag ad batter voltage is ok TAG Sstem Etr (Batt. Low) The sstem has bee put i to etr via tag ad batter has low voltage TIME Armed Area? was armed automaticall usig oe of the cotrol timers TIME CHANGED The cotrol pael Date has bee chaged TIME Disarmed Area? was disarmed automaticall usig oe of the cotrol timers TUBE ### Alarm Zoe ### (programmed as Ke Tube) has caused a alarm USER ## User ## has etered their code User Ack A user has ackowledged a fault to set sstem USER CODE CHANGED A User code has bee altered USER ADDED A User code has bee added USER DELETED A User code has bee deleted User Reset A reset has bee performed usig a User code WALK Test Start The Walk Test mode has bee iitiated Zoe ### Alarm Zoe ### has bee activated Zoe ### Tamper Zoe ### has caused a Tamper alarm Zoe ### Restore Zoe ### has restored to its ormal coditio Zoe ### Omitted Zoe ### has bee omitted Zoe ### U-Omit Zoe ### has bee reistated Zoe ### Test Start Zoe ### has bee put o test Zoe ### Test Ed Zoe ### has bee removed from test Zoe ### Fault Zoe ### has geerated a Fault Coditio Zoe ### Masked Zoe ### has bee Masked 130 INS176-15

131 Premier Elite Series Istallatio Maual Egieer Utilities Do Bell Test Do Walk Test 24/48/64/88/168 E o elec: Egiee Uils Egiee Uils ie Ee og 1 Egiee Uils o ell es sh E o es ell is O sh E o es ell isaled sh E o es igi sh E o es igi 3 sh E o es igi N This optio allows the Bell, Speaker ad various cotrol pael outputs to be tested. The followig outputs ca be idividuall tested: Test Bell Test Strobe Test Speaker Test Digi Test Pael Test RedCARE Test Com???? LCD Displa User Outputs The Bell output The Strobe output The Speaker output The Hardwired digicom outputs The pael outputs The plug o RedCARE outputs The plug o Com 300/2400 digi chaels The LCD kepad displa A outputs that have the User Test attribute (see page 88 for details). Pressig OMIT at the Bell or Strobe Test will cause the Strobe output to pulse 3 times, ivokig Egieers Hold Off mode if a Texecom bell box is coected. E o elec: Egiee Uils Egiee Uils ie Ee og 2 Egiee Uils o al es? al es eas EH < E C Zoe oge I A Zoes ha eed esig ae : Zoe o oo N 7 A of the zoes o the sstem ca be walk tested to esure that the operate correctl. A walk test ca ol be performed whe the sstem or area is disarmed. Oce a zoe has bee activated it will ot geerate a chime toe agai. If however the C ke is pressed, a zoe will chime ever time it is activated. The Walk test meu also icludes a last activatio log that ca be recalled whe doig a walk test. This log shows zoes that have NOT bee activated over a period of das. Pressig the A ke will firstl show the zoes that still eed testig, pressig the A ke a secod time will displa the zoes that have ot bee activated that da, to view zoes that have ot bee activated for 3 das, tpe i 003 the maximum umber of das that ca be recalled is 255, pressig the A ke a third time will revert back to the stadard walk test displa. INS

132 Egieer Utilities Do Walk Test 640 E o elec: Egiee Uils Egiee Uils ie Ee og 2 Egiee Uils o al es? al es eas EH<JK CP al es eas4 EH<JK A al es eas4 E E C Zoe oge I A Zoes ha eed esig ae : View Zoe Status E o elec: Egiee Uils Egiee Uils ie Ee og 3 Egiee Uils ie Zoe as Zoe ael ece Zoe 4 E78 ece Zoe 4 E78 cie O Zoe4 E78 Zoe isaled N Premier Elite Series Istallatio Maual This optio ca be used to view the status of a zoe o the sstem to see whether it is Active, Secure, Tampered or Shorted. The selected zoe ca also be temporaril disabled (zoe ad tamper) to allow the zoe to be worked o or made to chime ever time it is activated. Whe leavig the View Zoe Status meu, all zoes will be automaticall reistated ad cleared of Chime. Zoe o oo N 7 A of the zoes o the sstem ca be walk tested to esure that the operate correctl. A walk test ca ol be performed whe the sstem or area is disarmed. Oce a zoe has bee activated it will ot geerate a chime toe agai. If however the C ke is pressed, a zoe will chime ever time it is activated. The Walk test meu also icludes a last activatio log that ca be recalled whe doig a walk test. This log shows zoes that have NOT bee activated over a period of das. Pressig the A ke will firstl show the zoes that still eed testig, pressig the A ke a secod time will displa the zoes that have ot bee activated that da, to view zoes that have ot bee activated for 3 das, tpe i 003 the maximum umber of das that ca be recalled is 255, pressig the A ke a third time will revert back to the stadard walk test displa. 132 INS176-15

133 Premier Elite Series Istallatio Maual Egieer Utilities Do Sstem Tests Cofirm Devices E o elec: Egiee Uils Egiee Uils ie Ee og 4 Egiee Uils se ess o o a o ie s as s olage37 s e8 This optio allows various cotrol pael features to be tested or reviewed. 1 - View Ss. Status Allows the sstem voltage ad curret to be viewed. 2 - View Batt Status Allows the batter voltage ad chargig status to be viewed. 3 - Test Outputs Allows the Bell, Speaker ad sstem outputs to be tested. 4 - View Versio No. This optio allows the cotrol pael software versio ad serial umber to be viewed. E o elec: Egiee Uils Egiee Uils ie Ee og 5 Egiee Uils oi eices e K Ep e K3 Ep ess E agai o oi e K3 Ep A e Eos 4 as K R e Eos as K This optio allows the etworks to be viewed to see what devices are coected ad whether there are a problems. Wheever ew devices are added to the sstem, the etworks must be checked ad cofirmed. If a devices are removed from the sstem, the etworks must be rechecked ad recofirmed. A X o the displa idicates that device that was previous fitted is o loger beig see b the cotrol pael. INS

134 Egieer Utilities View RKP Status E o elec: Egiee Uils Egiee Uils ie Ee og 6 Egiee Uils ie K as Z= Z= ied 3 Z=H Z=H ap=h p= This optio allows the status of the kepad, the zoes ad the output to be viewed. The status idicatios show have the followig codes:. H: Health, A: Active, T: Tamper, F: Fault, S: Secure, M: Masked View Exp. Status E o elec: Egiee Uils Egiee Uils ie Ep as E 3478 o ied E Zoes Egiee Uils ie Ee og HHHHHHHH Premier Elite Series Istallatio Maual The PSU status shows the followig codes:. A: AC Mais Fail 1: Batter 1 Fault 2: Batter 2 Fault F: Mais Fuse Blow T: PSU Box Tamper Set Sstem Time E o elec: Egiee Uils Egiee Uils ie Ee og 8 Egiee Uils e se ie? Ee e ie : Ee e ie :4 The cotrol pael has a real time clock that is used to date ad time stamp evets that are recorded withi the sstem log. The optio allows ou to set the cotrol pael time. Set Sstem Date E o elec: Egiee Uils Egiee Uils ie Ee og 9 Egiee Uils e se ae? Ee e dae // E 3478 ps N AA EU :3 I:: : N Ee e dae 3// This optio allows the status of the expader, the zoes, voltage/iputs ad outputs ad a moitored power suppl to be viewed. The status idicatios show have the followig codes:. H: Health, A: Active, T: Tamper, F: Fault, S: Secure, M: Masked The cotrol pael has a real time clock that is used to date ad time stamp evets that are recorded withi the sstem log. The optio allows ou to set the cotrol pael date. 134 INS176-15

135 Premier Elite Series Istallatio Maual Egieer Utilities Chage Eg. Code Default NVM Data E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils hage Eg ode Ee e ode Ee e ode 34 This optio allows the Egieer code (User 00) to be chaged. This code ca be 4, 5 or 6 digits i legth. The sstem will allow a mixture of differet legth User codes. Adjust Volumes E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils eal aa ess E ese: ael ps 3 ess E ese: Kepad ps Kepad ps lease ai This optio allows various parts of the NVM to be defaulted without havig to Factor Default the sstem. E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils djs oles ael ole eel = Kepad 3 ole eel = 4 Locatio Text E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils ocaio e o ocaio e Has ee ep Kepad 3 ole eel =4 8 Kepad 3 ole eel =7 This optio allows the Pael Locatio text that has bee programmed i Sstem Text to be displaed (see page 76 for programmig details). The displa will automaticall clear after 5 secods. This optio is used to adjust the volume level of speakers that are coected to the cotrol pael, kepads ad expaders. Pressig the CHIME ke will cause the speaker that is beig programmed to geerate the exit toe at the selected volume level. INS

136 Egieer Utilities Prit Log Data Soak Test Areas 640 Premier Elite Series Istallatio Maual E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils i og aa e o Ees: e o Ees: This optio allows the Evet Log to be prited to a stadard RS232 priter (see page 47 for details). Soak Test Areas 24/48/64/88/168 E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils oa es eas oa es eas: < 2 E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils oa es eas oa es eas < CP oa es eas < A oa es eas EH< Whe a area is selected for soak test, the soak test timer is started. A zoes i the selected area with the soak test attribute will be put o soak test for the duratio of the soak test timer (see page 69). If the area soak test optio is subsequetl deselected before the ed of the test, all zoes are retured to ormal operatio. Whe a zoe is o soak test, it will ot cause a alarm whe activated. However the sstem will log the evet ad will otif the user that the zoe has failed soak test. A test failure will ot prevet the user armig the sstem ad will be cleared whe the egieers code is etered. At the ed of the soak test all zoes that have passed the test will be retured to ormal operatio. oa es eas: < Whe a area is selected for soak test, the soak test timer is started. A zoes i the selected area with the soak test attribute will be put o soak test for the duratio of the soak test timer (see page 69). If the area soak test optio is subsequetl deselected before the ed of the test, all zoes are retured to ormal operatio. Whe a zoe is o soak test, it will ot cause a alarm whe activated. However the sstem will log the evet ad will otif the user that the zoe has failed soak test. A test failure will ot prevet the user armig the sstem ad will be cleared whe the egieers code is etered. At the ed of the soak test all zoes that have passed the test will be retured to ormal operatio. 136 INS176-15

137 Premier Elite Series Istallatio Maual Egieer Utilities View id Data Cofigure Radio E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils ie i aa 0 A Q A E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils oige adio : I4 K : Zoe 3: o eice E o ea 3: o eice 8 ciae eice If Device alread programmed ID will show here i oop apped Zoe i oop apped Zoe i oop apped Zoe O i oop apped Zoe i oop apped Zoe N Viewig the id Data id is a registered trade mark of Chloride Safet Sstem Limited. 3: I433 :8 Zoe 3: I433 K :8 Zoe? 3: I433 K :8 Zoe8 3: I433 K :8 Zoe 8 N Top Lie = Serial umber ad status of device Bottom Lie = Sigal stregth ad zoe/user umber Cofigurig Radio devices (NOT V2 Sstems) Up to 32 wireless devices ca be leart o to the sstem this ca be a combiatio of detectors, mag cotacts ad remote FOBs. The umber of remote FOBs is limited to the maximum umber of devices the expader ca accept. Wireless devices ca the be mapped o to the sstem alog with covetioal detectors. The top lie o the displa shows the serial umber of the device ad also the status i.e. Active, Tamper etc. The bottom lie of the displa shows the sigal stregth ad also which zoe/user the device is mapped to. Sigal stregth should be greater tha 30. The sigal rage is betwee 0 ad 90 To delete radio devices, select the device umber to be deleted the follow the procedure for learig a ew device but press the R butto o the kepad whe prompted to activate device istead of activatig the tamper switch. INS

138 Egieer Utilities Ricochet Diagostics (V2 Ol) This meu displas iformatio about the live sstem, ad is split ito Premier Elite SmartKe ad Ricochet eabled devices via Zoes ad Users. Devices For Devices the followig iformatio ca be viewed:- Routeig RSSI Alarms ad Status Device visibilit Time sice last message Premier Elite SmartKe For Premier Elite SmartKe the followig iformatio ca be viewed:- Routeig RSSI Premier Elite SmartKe Butto Status Iterpretig Kepad Displas Routeig The image below shows that Zoe 009 is routeig through 14 ad the 7 to the expader, for Premier Elite SmartKe this ma var depedig o where & whe the readig is take. If questio marks appear i the displa it meas the iformatio is ot available. Zoe I 47 RSSI Each value i the image below represets the RSSI levels i dbm at each of the hops. If questio marks appear o the displa it meas the iformatio is ot available. A device showig a level of <20 i commissio mode should be ivestigated as the poor sigal ma affect sstem/device performace. Zoe I 8 If questio marks appear it could be because either the sstem has just bee powered up ad iformatio has ot bee collected et, or o large sstems the iformatio is ot i memor. To populate the displa activate the device ad the iformatio should appear. Device Messages Zoe o icoche Zoe I sg??? is ago Zoe I h sice sg Zoe I o sg ecd e Sigal Securit Zoe???? hoc The chose zoe does ot have a Ricochet device leared to it. shows the last time the device commuicated this represets the last message ad could be a poll, activatio or tamper etc... This is a warig showig that the last commuicatio from the device was over a hour ago. This displa shows that o message has bee received et, this would ormall be see o a recetl powered up sstem, wait 15 miutes from power up before checkig the diagostics iformatio. This displa shows iformatio relatig to sigal securit o a 8XP-W. 4 widows are available to show iformatio; each widow represets two devices, (Odd & Eve device slots). Each widow could show a of the iformatio detailed i the table below? No iformatio is available _ The chose device caot see either of the devices O The chose device ca see the ODD device(s) E The chose device ca see the EVEN device(s) B The chose device ca see BOTH devices Example Zoe _E hoc Premier Elite Series Istallatio Maual I this example Zoe 9 ca see the devices as detailed below, use the scroll ke to view iformatio about other devices:- Displa _ E Device Ca see O the 32XP-W there are 16 widows to show iformatio from the 32 devices of the sstem; the format is the same. Device Status Zoe hoc as: aaapd Secure/OK Active/Fault Tpe a A Mag1 a A Mag2/Sho a A Reed/PIR s S Poll/Supervisio p P Power/Batter d D Device t T Rear t T Frot Premier Elite SmartKe Messages Use icoche o icoche Use icoche o coeced Use icoche ogo a K Use icoche aa a K Use icoche isa a K Use icoche lla a K Use icoche? a K Use icoche aic a K E o ease o eos The chose user does ot have a Premier Elite SmartKe associated with them. The Premier Elite SmartKe is ot switched o Shows the batter is OK ad the fob has logged oto the sstem. Shows the differet messages displaed whe the relevat buttos are pressed. Shows which Aux butto has bee pressed whe i Fuctio Mode. Shows the Paic fuctio has bee activated Use this optio ONLY if the pael has bee replaced ad ot all Premier Elite SmartKe are recogised b the ew pael, or if the error toe is heard whe learig ew Premier Elite SmartKe This optio DOES NOT remove kow Premier Elite SmartKe, use the Delete optio i Setup Users. Low sigal securit For V3 the kepad ca displa basic sigal securit iformatio for each device o a expader. Each device will show H High, M Medium or L Low sigal securit. The sstem is updated live ad therefore it is possible to determie chages b movig devices, or b addig more to the sstem. The iformatio displaed replicates what is see whe usig Ricochet Moitor. Low Sigal Securit Displas The etwork, expader ad umber of devices leart to the expader will be show. Use the ke to select the expader ou wish to view. No devices leart to the expader. 8 spaces available. 2 devices out of eight leart showig Low sigal securit. Addig more devices will improve the readig, movig them will ot. 8 devices o the sstem, 2 show Medium sigal securit. 6 showig Low sigal securit. Movig the devices ma improve the sstem. 8 Devices leart to the sstem, all devices showig High sigal securit, the sstem is operatig perfectl. 138 INS176-15

139 Premier Elite Series Istallatio Maual Egieer Utilities Ricochet Diagostics Meu E o elec: Egiee Uils Egiee Uils ie Ee og Zoe o icoche Zoe hoc?????? C Zoe hoc?????? C Zoe hoc as: aaapd Zoe hoc???????????????? C Zoe hoc h sice sg C O Use icoche o icoche Use icoche o coeced Use icoche Use C C Use icoche ogo a K C N P R eo eices: 8 H E o ease o eos N INS

140 Egieer Utilities Sigallig Test :373 e E o elec: Zoe ep 9 E o elec: Egiee Uils Egiee Uils ie Ee og Egiee Uils igallig es elec eas < elec Zoes Zoe C elec Zoes Zoe og Egiee ad se la Egiee oig o ie This ew feature allows all of the commuicatio paths available to be tested to esure that the are sigallig correctl. Durig the test souders will be disabled, but sigallig to ARC's or other devices will occur allowig a sstem to be checked eve i a occupied buildig. This is similar to the curret method of usig the Egieer Alarm attribute for zoes, but is ow a much simpler procedure as the fuctio is cotaied withi oe meu. Durig the test ol devices selected will cause a alarm activatio. Ricochet devices Premier Elite Series Istallatio Maual The operatio of Ricochet devices selected for the sigallig test will be altered for the duratio of the test. With the exceptio of Ricochet souders all devices will be chaged to Alwas Awake to make testig easier. Oce the test is complete ad the sstem is disarmed all devices will be put back to their origiall programmed state. View Uique ID Use the umber kes to toggle Areas O or Off Use the ke or eter the Zoe umber to select the zoe required. Use the C ke to eable the zoe i the Sigallig Test A will be show o the scree * idicatig the zoe is selected ad ca be used for the sigallig test. Pressig will arm the sstem as a egieer. The egieer's code ca the used to disarm the sstem followig the test. If after a short time ou do ot press or the sstem will arm as a egieer ad ma be disarmed with the egieer's code followig the test. Pressig will log the egieer off ad arm the sstem as the master user. The sigallig test WILL NOT be able to be performed, ad a user will the be required to disarm the sstem followig the test. Oce the test is complete eter the code required to disarm the sstem. A zoes selected for the test will be reistated ito the sstem. A Ricochet devices eabled for the test will be retured to their programmed mode of operatio. This meu allows ou to view the Uique ID assiged to the pael. The ID is used b Texecom cloud based services. V4> paels have the code b default. Paels flashed from earlier versios of firmware will eed to be coected to Witex to have a Uique ID writte to them. 140 INS176-15

141 Premier Elite Series Istallatio Maual Egieer Utilities Ecrptio Ke V3.01 & V3.02 ol I V4.xx> firmware the Ecrptio ke has moved to the UDL/Digi Optios meu. Please see page bit AES Ecrptio has bee added for commuicatios with our mobile app s. The ecrptio ke is geerated b the app ad MUST be etered ito a phsical kepad o the sstem. It is ot possible to eter the meu from a olie kepad or the app. The ecrptio ke meu will ol be show whe creatig a ew site i the app, or whe ou have coected to a site followig a upgrade to V3.01 firmware. Use of the Ecrptio ke is i additio to the other requiremets to make the app s fuctio, ad is optioal. Programmig the Cotrol Pael. (Not V4 see above) The ecrptio ke is etered ito a dedicated meu. The followig procedure should be followed otig the use of special kes to eter the required hexadecimal characters. The rage used is 0-9 for umeric characters, ad a, b, c, d, e, & f for alpha. Ke Character / C/ / a & b c & d e & f es o elec: Zoe ep 9 es o elec: Egiee Uils Egiee Uils Ecpio Ke ^ 84ed4cda8d4 od774e8de INS

142 Programmig Part Arms Premier Elite Series Istallatio Maual 5.10 Programmig Part Arms Alter Part Arms E o elec: Zoe ep Each area o the sstem ca have up to 3 Part Arms. Whe Part Arm 1, 2 or 3 is selected, pre-programmed zoes are omitted to allow access to certai parts of the buildig. E o elec: le a s o a Zoe is C o a Zoe is? o a Zoe is o a Zoe is 142 INS176-15

143 Premier Elite Series Istallatio Maual Ricochet Lear 5.11 Ricochet Lear Learig Devices Lear Devices from first power up Follow the istructios give o page 48 for first power up of the sstem. Whe the "Cofirm Devices" meu appears check ad make sure all istalled Kepads ad Expaders are showig; press / ad / agai to cofirm. Providig the sstem has a Ricochet eabled expader istalled, the followig will appear. The flow diagram shows the procedure to lear devices:- E o elec: ea icoche ea eice? Zoe????E?? oe p eice?e??? s Whe all device slots have bee used the followig scree will be show ll eices ea Pressig the N/N ke will retur ou to the Ricochet lear meu; pressig the R/R ke will eter the Delete devices meu. ea eice o Zoe????E?? N N U Commissioig Oce all devices are leart the should be istalled i their locatios startig closest to the expader ad workig to furthest awa. To start commissio mode the receiver should be i Tamper, or i the case of the -W paels place the jumper o Fit for Commissio positio. Wait for at least 15 miutes ad the test all devices. Access the Lear Meu usig the Omit Hot ke From a top level egieerig meu pressig the B/ ke will take ou to the Ricochet lear meu above. Meu B/ Ricochet Lear Meu E o elec: E o elec:???????????????? B/ ea icoche IMPORTANT I all cases whe eterig the Lear meu the ext available free Zoe will be chose to lear a device too. It will ot be possible to lear a device to a Zoe that alread has a device leared too it. The umber of expader s o the sstem will dictate which ext free zoe is chose to lear too. Auto Zoe Tpe & Area Whe learig devices, if o editig has take place of the cotrol pael oboard hardwired zoes, these will be switched to Not Used after the first Ricochet device is leared to the sstem; the followig defaults will be used for Ricochet devices leared to the sstem. Zoe Tpe Area Not Used N/A 009 Etr/Exit 1 A 010 Guard Access A 011 & above Guard A IMPORTANT If a editig of a of the o board cotrol pael zoes is carried out BEFORE a Ricochet devices are leared too the sstem, the cotrol pael zoes will remai at factor defaults. INS

144 Ricochet Lear Premier Elite Series Istallatio Maual Deletig Devices Delete Devices To delete devices from the sstem, access the Ricochet Lear meu. A of the methods previousl detailed ma be used. The R/R ke is used to access the Delete optio. Follow the flow diagram below to delete devices from the sstem. E o elec: ea icoche ea eice Zoe????E? R R elee eice? Zoe????E? N N R R U If all devices are deleted from the sstem the followig will be show ll eices eleed Pressig the N ke will retur ou to the Ricochet lear meu; pressig the R ke will eter the Lear devices meu. 144 INS176-15

145 Premier Elite Series Istallatio Maual Specificatios 6. Specificatios Cotrol Paels Idetifig the Cotrol Pael Tpe Code Descriptio ASB Premier Elite 12-W AEO Premier Elite 24 AEJ Premier Elite48 AFG Premier Elite 48-W 868MHz AFN Premier Elite 48-W 433MHz AEK Premier Elite 88 ATH Premier Elite 64-W 868MHz ATJ Premier Elite 64-W 433MHz ATI Premier Elite 64-W 866MHz ATH Premier Elite 64-W Live 868MHz ATI Premier Elite 64-W Live 866MHz AEL Premier Elite 168 AEZ Premier Elite 640 Premier Elite 24 (Polmer) Curret Curret Cosumptio 95mA Maximum Curret Available 0.3A charge 1.1A Rated Output Batter Rated Output (Amps) 12h Batter Arragemet Charge 1 x 7Ah 0.3A 0.48A Stadb ad Recharge Times EN Grade 1 Grade 2 Miimum Stadb Period 12h 12h Maximum Recharge Time 72 Hrs 72 Hrs PD6662 Grade 1 Grade 2 Stadb Period 12 Hrs 12 Hrs Maximum Recharge Time 72 Hrs 72 Hrs Power Suppl Tpe A Rated Iput: 100V - 50/60Hz; 1A Rated Output 55 C:: 1.5A MAX Rated Output Voltage: 13.&Vdc +/- 2% Mais Termial Block Fuse: 250Vac; A Slow/Medium Blow Maximum ratig of each power output (ote that these are ot cosidered to be "idepedet power outputs" accordig to EN Aux 12V 1.0A Bell/Strobe 1.0A Network 1 1.0A Batter 1.6A DC+/DC- 1.0A Stadb Curret 95mA Output Voltage Rage: 13.0V to 13.9V Maximum Ripple Voltage: 0.5V pk-pk Batter tpe: sealed lead acid, up to 7Ah, Maximum recharge time 72h Batter Low Voltage Sigal: 9.5V Power Output Fault sigal: 10.5V (with mais preset) Deep Discharge protectio: 8.6V Over voltage protectio trigger: 16V Fuses F1 (900mA) Auxiliar 12V Power fuse (electroic PTC) F2 (900mA) Digicom Power (electroic PTC) F3 (900mA) Network 1 fuse (electroic PTC) F4 (900mA) Bell/Strobe fuse (electroic PTC) F6 (1.6 Amp) Batter fuse (electroic PTC) Housig Dimesios (W x H x D) Batter Compartmet Packed Weight 3mm Polcarboate 305mm x 263mm x 98mm Oe 12V 7.0Ah batter 1.5 Kg (Approx) Premier Elite 24 (Metal) Curret Curret Cosumptio 95mA Maximum Curret Available 0.75A charge 1.0A 0.3A charge 1.9A Rated Output Batter Batter Rated Output (Amps) Arragemet Charge 12h 24h 30h 60h 1 x 7Ah 0.3A 0.48A 0.19A 0.13A 0.021A 1 x 17Ah 0.3A 1.32A 0.61A 0.47A 0.18A 0.75A 1.0A 0.61A 0.47A 0.18A Stadb ad Recharge Times EN Grade 1 Grade 2 Grade 3 Miimum Stadb Period 12h 12h 30h * Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Jumper Settigs Batter Arragemet Recharge Time Batter Charge Selector 1 x 7Ah < 24Hrs 0.3 A 1 x 17Ah < 24Hrs 0.75 A < 72Hrs 0.3 A Power Suppl Tpe A Rated Iput: Rated Output Curret@40 C: 220V - 1A 2.5A MAX Rated Iput: Rated Output Curret@40 C: 100VV - 1A 2.3A MAX Rated Output Voltage: 13.&Vdc +/- 2% Mais Termial Block Fuse: 250Vac; A Slow/Medium Blow Maximum ratig of each power output (ote that these are ot cosidered to be "idepedet power outputs" accordig to EN Aux 12V Bell/Strobe Network 1 Batter DC+/DC- 1.0A 1.0A 1.0A 1.6A 1.0A Stadb Curret 95mA Output Voltage Rage: 13.0V to 13.9V Maximum Ripple Voltage: 0.5V pk-pk Batter tpe: sealed lead acid, up to 18Ah, Maximum recharge time 24h (0.75A charge rate) 72h (0.3A charge rate) Batter Low Voltage Sigal: 9.5V Power Output Fault sigal: 10.5V (with mais preset) Deep Discharge protectio: 8.6V Over voltage protectio trigger: 16V Fuses F1 (900mA) Auxiliar 12V Power fuse (electroic PTC) F2 (900mA) Digicom Power (electroic PTC) F3 (900mA) Network 1 fuse (electroic PTC) F4 (900mA) Bell/Strobe fuse (electroic PTC) F6 (1.6 Amp) Batter fuse (electroic PTC) Housig Dimesios (W x H x D) Batter Compartmet Packed Weight Premier Elite 12/24/48/64-W Curret Curret Cosumptio 150mA Maximum Curret Available 0.3A charge 1.0A Rated Output Batter 1mm Mild Steel 315mm x 415mm x 100mm Up tp oe 18Ah batter 4.5 Kg (Approx) Rated Output (Amps) 12h Batter Arragemet Charge 1 x 7Ah 0.3A 0.433A INS

146 Specificatios Stadb ad Recharge Times EN Grade 1 Grade 2 Miimum Stadb Period 12h 12h Maximum Recharge Time 72 Hrs 72 Hrs PD6662 Grade 1 Grade 2 Stadb Period 12 Hrs 12 Hrs Maximum Recharge Time 72 Hrs 72 Hrs Power Suppl Tpe A Rated Iput: 100V - 50/60Hz; 1A Rated Output 55 C:: 1.5A MAX Rated Output Voltage: 13.&Vdc +/- 2% Mais Termial Block Fuse: 250Vac; A Slow/Medium Blow Maximum ratig of each power output (ote that these are ot cosidered to be "idepedet power outputs" accordig to EN Aux 12V 1.0A Bell/Strobe 1.0A Network 1 1.0A Batter 1.6A DC+/DC- 1.0A Stadb Curret 150mA Output Voltage Rage: 13.0V to 13.9V Maximum Ripple Voltage: 0.5V pk-pk Batter tpe: sealed lead acid, up to 7Ah, Maximum recharge time 72h Batter Low Voltage Sigal: 9.5V Power Output Fault sigal: 10.5V (with mais preset) Deep Discharge protectio: 8.1V Over voltage protectio trigger: 16V Fuses F6 PTC (0.9A) Auxiliar 12V Power fuse F4 PTC (0.9 A) Network 1 fuse F5 PTC (0.9 A) Bell/Strobe fuse Pael 24/48 & 64-W 12-W Housig 3mm Polcarboate 3mm Polcarboate Dimesios (W x H x D) 305mm x 263mm x 283mm x 229mm x 98mm 85mm Batter Compartmet Oe 12V 7.0Ah batter Oe 12V 7.0Ah batter Packed Weight 1.7 Kg (Approx) 1.7 Kg (Approx) Premier Elite 48/88/168 Curret Curret Cosumptio 125mA Maximum Curret Available 0.75A charge 1.0A 0.3A charge 1.9A Rated Output Batter Rated Output (Amps) 12h 24h 30h 60h Batter Arragemet Charge 1 x 7Ah 0.3A 0.458A 0.166A 0.108A 1 x 17Ah 0.3A 1.29A 0.583A 0.441A 0.158A 0.75A 1.0A 0.583A 0.441A A Stadb ad Recharge Times EN Grade 1 Grade 2 Grade 3 Miimum Stadb Period 12h 12h 30h * Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Jumper Settigs Batter Arragemet Recharge Time Batter Charge Selector 1 x 7Ah < 24Hrs 0.3 A 1 x 17Ah < 24Hrs 0.75 A < 72Hrs 0.3 A Power Suppl Tpe A Rated Iput: 220V - 1A Rated Output Curret@40 C: 2.5A MAX Rated Iput: 100VV - 1A Rated Output Curret@40 C: 2.3A MAX Rated Output Voltage: 13.&Vdc +/- 2% Mais Termial Block Fuse: 250Vac; A Slow/Medium Blow Maximum ratig of each power output (ote that these are ot cosidered to be "idepedet power outputs" accordig to EN Aux 12V 1.0A Bell/Strobe 1.0A Network 1 & 2 1.0A Batter 1.6A DC+/DC- 1.0A Stadb Curret 125mA Premier Elite Series Istallatio Maual Output Voltage Rage: 13.0V to 13.9V Maximum Ripple Voltage: 0.5V pk-pk Batter tpe: sealed lead acid, up to 18Ah, Maximum recharge time 72h Batter Low Voltage Sigal: 9.5V Power Output Fault sigal: 10.5V (with mais preset) Deep Discharge protectio: 8.6V Over voltage protectio trigger: 16V Fuses F1 (1Amp) Auxiliar 12V Power fuse F2 (1.6 Amp) Batter fuse (electroic PTC) F3 (1 Amp) Network 1 fuse F4 (1 Amp) Bell/Strobe fuse F5 (1 Amp) Network 2 fuse (168 ol) Housig Dimesios (W x H x D) Batter Compartmet Packed Weight Premier Elite 640 Curret Curret Cosumptio 125mA Maximum Curret Available 0.75A charge 1.0A Rated Output Batter 1mm Mild Steel 315mm x 415mm x 100mm Up tp oe 18Ah batter 4.5 Kg (Approx) Batter Rated Output (Amps) Arragemet Charge 12h 24h 30h 60h 1 x 17Ah 0.75A 1.0A 0.558A 0.416A 0.133A Stadb ad Recharge Times EN Grade 1 Grade 2 Grade 3 Miimum Stadb Period 12h 12h 30h * Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs PD6662 Grade 1 Grade 2 Grade 3 Stadb Period 12 Hrs 12 Hrs 24 Hrs ** Maximum Recharge Time 72 Hrs 72 Hrs 24 Hrs *30h if MAINS FAIL is reported to ARC, otherwise 60h **This time ma be halved if mais failure is sigalled to a ARC Power Suppl Tpe A Rated Iput: Rated Output Curret@40 C: 220V - 1A 2.5A MAX Rated Iput: Rated Output Curret@40 C: 100VV - 1A 2.3A MAX Rated Output Voltage: 13.&Vdc +/- 2% Mais Termial Block Fuse: 250Vac; A Slow/Medium Blow Maximum ratig of each power output (ote that these are ot cosidered to be "idepedet power outputs" accordig to EN Aux 12V Bell/Strobe Network 1 & 2 Batter DC+/DC- 1.0A 1.0A 1.0A 1.6A 1.0A Stadb Curret 150mA Output Voltage Rage: 13.0V to 13.9V Maximum Ripple Voltage: 0.5V pk-pk Batter tpe: sealed lead acid, up to 18Ah, Maximum recharge time 72h Batter Low Voltage Sigal: 9.5V Power Output Fault sigal: 10.5V (with mais preset) Deep Discharge protectio: 8.6V Over voltage protectio trigger: 16V Fuses (Electroic PTC) F3 (1600 ma) Batter F4 (250mA) Speaker F5 (900mA) Network 1 F6 (900mA) Bell/Strobe F7 (900mA) Network 2 F8 (900mA) Network 3 F9 (900mA) Network 4 F10 (900mA) Network 5 F11 (900mA) Network 6 F12 (900mA) Network 7 F13 (900mA) Network 8 F14 (900mA) Auxiliar 12V Housig Dimesios (W x H x D) Batter Compartmet Packed Weight Geeral (All Models) Data Network Remote Kepads 12-W 24 &48 & 48/64-W 1mm Mild Steel 315mm x 415mm x 100mm Up tp oe 18Ah batter 4.5 Kg (Approx) 4-wire stadard 7/0.2 alarm cable up to 500m Star, Dais Chai or a combiatio of the two Up to 2 Up to INS176-15

147 Premier Elite Series Istallatio Maual Specificatios Expaders 12-W 24 & 24-W 48 & 48-W 64-W & Output Modules & 48/64-W Zoes 12-W W W 64-W EOL Resistor Values EOL Resistor Cotact Resistor Fault Resistor 0-1k 1k1 to 4k 4k1 to 5k6 5k7 to 8k 8k1 to 20k (30k) 21k+ (30k+) Digicom Outputs 12-W Outputs /48/64/88/168 & 640 Outputs 1 to 8 Pael Outputs PG1 (24 ol) Outputs 1 & 2 (48/64/88/168) Outputs 3 & 4 (88/168) Output 5 (88/168) Sire Outputs Bell Trigger Strobe Trigger Speaker Output Up to 8 Up to 16 Up to 64 0 Up to 2 Up to 4 Up to 8 Up to 16 Up to 64 1 Up to 2 Up to 4 Up to 8 Up to 32 4 expadable to 16 8 expadable to 24 4 expadable to 24 8 expadable to 48 4 expadable to 48 4 expadable to 76 8 expadable to 88 8 expadable to expadable to 640- (Alteratives Available) 2k2 (3k3) 4k7 (3k3) 2k2 Zoe Short Zoe Secure Zoe Fault Zoe Active Zoe Mask Zoe Tamper 100mA switched to 0V 100mA switched to 0V 100mA -ve 500mA switched to 0V 500mA switched to 12V 3 Amp Rela 1A switched to 0V 1A switched to 0V Miimum load 8 Calibratio Checks & Adjustmets There are o calibratio checks or adjustmets available o the cotrol pael. Optioal Fuctios Where optioal fuctios, described i EN are provided, it is the istallers resposibilit to esure these are programmed correctl. I additio, a optioal fuctios ma ol be provided at the correct access levels as described i EN Additioal Fuctios Where additioal fuctios ot described i EN are provided, it is the istallers resposibilit to esure that the sstem remais compliat whe these fuctios are used. The istaller should esure that a additioal fuctios are provided at the correct access levels as described i EN Sigal & Message Processig Idicatios First alarm idicatios followed b a other evets durig the set period will scroll ad ca be cotrolled b the ke o the kepad. Memor Support A memor support batter is ot required. Compliace Label If the alarm sstem is programmed to NOT coform with EN or EN or is istalled to Grade 1 the compliace label MUST be removed. Egieer Access Global Optios/Sstem Cofiguratio Optio 10 see page 71 set to Egieer ol EN50131 ad User + Egieer for PD6662. Evirometal (All Models) Operatig Temperature Storage Temperature Maximum Humidit EMC Eviromet Ihibit Fuctios -10C to +40C -20C o +60C 95% o-codesig Residetial Commercial Light Idustrial Idustrial For Alarms ad Tamper is cotrolled b the Swiger shutdow couter which is programmable ad is defaulted to 3.Please see page 46 ad 69. Miimum Logical Kes 10,000 for 4 digit code* 100,000 for 5 digit code* 1,000,000 for 6 digit code* The umber of disallowed codes = 0* User codes must be programmed as a 6 digit code to compl with INCERT. Depedat o the use of the Black Listed codes fuctio available via Witex, a maximum of 16 codes ma be Black Listed. Notificatio Optios All Premier Elite cotrol paels compl with otificatio optios A,B,C & D whe used with a appropriate Self powered audible warig device ad compliat ATS. Microprocessor Idetificatio Premier Elite 24/48/88/168 Premier Elite 640 Remote Kepads Electrical Operatig Voltage ACE Tpe Curret Cosumptio without Prox Quiescet (Not Backlit) Alarm (Not Backlit) Full Backlit Alarm + Full Backlit Curret Cosumptio with Prox Quiescet (Not Backlit) Alarm (Not Backlit) Full Backlit Alarm + Full Backlit Data Network Kepad Tpe LCD LCDL LCDP LCDLP 24LC256I/P 25LC1024I/P VDC B INS mA 45mA 100mA 145mA 85mA 105mA 185mA 205mA 4-wire stadard 7/0.2 alarm cable up to 500m Star, Dais Chai or a combiatio of the two 32 Character LCD 32 Character large LCD LCD + Prox Reader LCDL + Prox Reader Zoes 2 EOL Resistor Values (Alteratives Available) EOL Resistor 2k2 (3k3) Cotact Resistor 4k7 (3k3) Fault Resistor 2k2 0-1k Zoe Short 1k1 to 4k Zoe Secure 4k1 to 5k6 Zoe Fault 5k7 to 8k Zoe Active 8k1 to 20k (30k) Zoe Mask 21k+ (30k+) Zoe Tamper Output 100mA switched to 0V Back Lightig Full adjustable Speaker Output (LCDL/LCDLP) Miimum load 8 Speaker Volume (LCDL/LCDLP) Full adjustable Proximit Reader (LCDP/LCDLP) Tag

148 Specificatios Premier Elite Series Istallatio Maual Evirometal Operatig Temperature Storage Temperature Maximum Humidit EMC Eviromet Phsical Dimesios (W x H x D) Packed Weight Zoe Expaders Electrical Operatig Voltage ACE Tpe Curret Cosumptio 4XP 8XP Quiescet Alarm (Nothig Coected) Data Network Zoes 8XP 60IXD EOL Resistor Values EOL Resistor Cotact Resistor Fault Resistor 0-1k 1k1 to 4k 4k1 to 5k6 5k7 to 8k 8k1 to 20k (30k) 21k+ (30k+) Outputs Outputs 1 & 2 (4XP) Outputs 1-8 (8XP) Speaker Output (4XP & 8XP) -10C (+14F) to +55C (+131F) -20C (-4F) to +60C (+140F) 95% o-codesig Residetial Commercial Light Idustrial Idustrial 145mm x 115mm x 30mm 260g Approx VDC B 65mA 65mA 4-wire stadard 7/0.2 alarm cable up to 500m Star, Dais Chai or a combiatio of the two 8 DP or EOL zoes 60 id zoes (2 loops) (Alteratives Available) 2k2 (3k3) 4k7 (3k3) 2k2 Zoe Short Zoe Secure Zoe Fault Zoe Active Zoe Mask Zoe Tamper 100mA switched to 0V 100mA switched to 0V Miimum load 8 Storage Temperature Maximum Humidit EMC Eviromet Phsical Dimesios (W x H x D) Packed Weight Output Expaders Electrical Operatig Voltage ACE Tpe Curret Cosumptio Quiescet Alarm (Nothig Coected) Network Bak 1 Outputs Outputs 1 to 8 Bak 2 Outputs Outputs 1 to 8 Evirometal Operatig Temperature Storage Temperature Maximum Humidit EMC Eviromet Phsical Dimesios (W x H x D) Packed Weight -20C (-4F) to +60C (+140F) 95% o-codesig Residetial Commercial Light Idustrial Idustrial 170mm x 140mm x 35mm 200g Approx VDC B 65mA 65mA 4-wire stadard 7/0.2 alarm cable up to 250m Star, Dais Chai or a combiatio of the two 100mA switched to 0V 100mA switched to 0V -10C (+14F) to +55C (+131F) -20C (-4F) to +60C (+140F) 95% o-codesig Residetial Commercial Light Idustrial Idustrial 170mm x 140mm x 35mm 200g Approx. Evirometal Operatig Temperature -10C (+14F) to +55C (+131F) Product Variats ad Compliace Products are compliat with EN :2009 Product Tpe Descriptio Securit Grade Evirometal INCERT EN :2009 class T 031 / T 014:2013 CAFA1000 Premier Elite 12 Pol 2 II Teleficatio T 031- Teleficatio CAA Premier Elite 24 Pol 2 II Teleficatio T 031- Teleficatio CAA Premier Elite 24 Metal 3 II Itertek Tick Mark T 031- Teleficatio CAB Premier Elite 48 3 II Itertek Tick Mark T 014 Teleficatio CAC Premier Elite 88 3 II Itertek Tick Mark T 014 Teleficatio CAD Premier Elite II Itertek Tick Mark T 014 Teleficatio CAE Premier Elite II GEA1000 Premier Elite 48-W 2 II T 014 Teleficatio GED1000 Premier Elite 24-W 2 II T 014 Teleficatio GEHA1000 Premier Elite 12-W 2 II T 014 Teleficatio GEWA1000 Premier Elite 64-W 868Mhz 2 II GEWA2000 Premier Elite 64-W 433Mhz 2 II GEWA3000 Premier Elite 64-W 866Mhz 2 II GEXA1000 Premier Elite 64-W Live Frot 868Mhz 2 II GEXA3000 Premier Elite 64-W Live Frot 866Mhz 2 II 148 INS176-15

149 Premier Elite Series Istallatio Maual Stadards Stadards Hereb, Texecom declares that Premier Elite alarm paels complies with the essetial requiremets of the followig Directives: 2014/30/EU EMC Directive 2014/35/EU LVD Directive 2011/65/EU RoHS Directive I relatio to wireless products: Hereb, Texecom declares that the radio equipmet tpe : GEWA1000, GEA1000 ( Premier Elite xx-w) ad GEXA1000 (Premier Elite 64-W LIVE), is i compliace with Directive 2014/53/EU. The full EU declaratio of coformit is available here: The product therefore meets all the requiremets to eable it to be CE marked. Weee Directive: 2012/19/EU (WEEE directive): Products marked with this smbol caot be disposed of as usorted muicipal waste i the Europea Uio. For proper recclig, retur this product to our local supplier upo the purchase of equivalet ew equipmet, or dispose of it at desigated collectio poits. For more iformatio see: Warrat All Texecom products are desiged for reliable, trouble free operatio. Qualit is carefull moitored b extesive computerised testig. As a result the cotrol pael is covered b a two-ear warrat agaist defects i materials or workmaship. As the cotrol pael is ot a complete alarm sstem but ol a part thereof, Texecom caot accept resposibilit or liabilit for a damages whatsoever based o a claim that the cotrol pael failed to fuctio correctl. Due to our polic of cotiuous improvemets Texecom reserve the right to chage specificatio without prior otice. Kepads ad Expaders are protected b UK & Iteratioal Registered Desig. Registered Desig Numbers: ad Premier & Premier Elite are trademarks of Texecom. INS

150 Notes Premier Elite Series Istallatio Maual Notes: 150 INS176-15

151 Premier Elite Series Istallatio Maual Notes Notes: INS

152 Texecom Limited, Bradwood Court, St. Crispi Wa, Hasligde, Lacashire BB4 4PW, Eglad. Techical Support: UK Customers Tel: (Calls charged at local rate from a BT ladlie. Calls from other etworks ma var.) Iteratioal Customers Tel: techsupport@texe.com Texecom Limited 2017 INS176-15