PLUMBING CODE REFERENCE Second Edition
|
|
- Janel Scott
- 6 years ago
- Views:
Transcription
1 PLUMBING CODE REFERENCE Second Edition Written by American Contractors Exam Services Published by /guides DeWalt Plumbing Reference_CS4.indd 1 6/25/10 10:24 AM
2 DEWALT Plumbing Code Reference: Second Edition American Contractors Exam Services Vice President, Technology and Trade Professional Business Unit:....Gregory L. Clayton Product Development Manager:... Robert Person Development:... Nobina Chakraborti Director of Marketing:... Beth A. Lutz Director of Building Trades:.... Taryn Zlatin McKenzie Marketing Manager:... Marissa Maiella Production Director:...Carolyn Miller Production Manager:...Andrew Crouth Content Project Manager:...Brooke Greenhouse Art Director:...Benjamin Gleeksman 2008, 2011 ALL RIGHTS RESERVED. No part of this work covered by the copyright herein may be reproduced, transmitted, stored, or used in any form or by any means graphic, electronic, or mechanical, including but not limited to photocopying, recording, scanning, digitizing, taping, Web distribution, information networks, or information storage and retrieval systems, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without the prior written permission of the publisher. For product information and technology assistance, contact us at Cengage Learning Customer & Sales Support, For permission to use material from this text or product, submit all requests online at Further permissions questions can be ed to: Library of Congress Control Number: ISBN-13: ISBN-10: Delmar 5 Maxwell Drive Clifton Park, NY USA ii DeWalt Plumbing Reference_CS4.indd 2 6/25/10 10:24 AM
3 Cengage Learning is a leading provider of customized learning solutions with office locations around the globe, including Singapore, the United Kingdom, Australia, Mexico, Brazil, and Japan. Locate your local office at: international.cengage.com/region Cengage Learning products are represented in Canada by Nelson Education, Ltd. Visit us at For more learning solutions, please visit our corporate website at Notice to the Reader Cengage Learning, DEWALT and the International Code Council do not warrant or guarantee any of the products described herein or perform any independent analysis in connection with any of the product information contained herein. Cengage Learning, DEWALT and the ICC do not assume, and expressly disclaim, any obligation to obtain and include information other than that provided to it by the manufacturer. The reader is expressly warned to consider and adopt all safety precautions that might be indicated by the activities described herein and to avoid all potential hazards. By following the instructions contained herein, the reader willingly assumes all risks in connection with such instructions. Cengage Learning, DEWALT and the ICC make no representations or warranties of any kind, including but not limited to, the warranties of fitness for particular purpose or merchantability, nor are any such representations implied with respect to the material set forth herein, and Cengage Learning, DEWALT and the ICC take no responsibility with respect to such material. Cengage Learning, DEWALT and the ICC shall not be liable for any special, consequential, or exemplary damages resulting, in whole or part, from the readers use of, or reliance upon, this material. Printed in China DEWALT and GUARANTEED TOUGH are registered trademarks of the DEWALT Industrial Tool Co., used under license. All rights reserved. The yellow and black olor scheme is a trademark for DEWALT Power Tools and Accessories. Trademark Licensee: Delmar, Cengage Learning. Executive Woods, 5 Maxwell Drive, Clifton Park, NY 12065, Tel.: , A licensee of DEWALT Idustrial Tools. iii DeWalt Plumbing Reference_CS4.indd 3 6/25/10 10:24 AM
4 Titles Available From Trade Reference Blueprint Reading Construction Construction Estimating Construction Safety/OSHA Datacom Electric Motor Electrical Estimating Electrical HVAC Estimating HVAC/R Master Edition Lighting & Maintenance Plumbing Plumbing Estimating Residential Remodeling & Repair Security, Sound & Video Spanish/English Construction Dictionary Illustrated Edition Wiring Diagrams Exam and Certification Building Contractor s Licensing Electrical Licensing HVAC Technician Certification Plumbing Licensing Code Reference Building Electrical HVAC Plumbing Business Resources Contractor s Forms & Letters /guides iv DeWalt Plumbing Reference_CS4.indd 4 6/25/10 10:24 AM
5 CONTENTS Materials Materials to use for Drains and Vents... 1 Materials to use for Water Piping Pipe Fittings P-Trap and Prohibited Traps... 6 Traps... 7 Hangers and Supports Valves APWA Uniform Color Code Permits and Inspection Trenching, Excavation, and Backfill Trenching, Excavation, and Backfill Types of Trenching Cutting and Notching Non-Load Bearing Partition Load Bearing Partition Testing Procedures Water Supply System Methods for Testing Drain and Vent Methods for Testing Gauges Bathroom Layout Minimum Code Requirements Vent and Drain Options Drain Pipes Vent Termination Cleanouts Water Piping Hot and Cold Water Lines Water Closet Lavatory Showers Bathtub Hydromassage Bathtub Utility Room Automatic Washing Machine Utility Sink Kitchen Sinks Air Admittance Valves Island Fixture Venting Water Heaters Attic Installation Water Heater Venting and Flues Required Vent Diameter Vent Termination Tankless Water Heater v DeWalt Plumbing Reference_CS4.indd 5 6/25/10 10:24 AM
6 CONTENTS Freezing, Protection of Pipes Lawn Irrigation Cross Connections Sill Cocks Backflow Prevention Air Gap Definitions Double Check Valve and Reduced Pressure Principle Atmospheric and Pressure Vacuum Breakers Isometrics Understanding Isometrics Symbols Commercial Restrooms Commercial Restrooms Lavatories Commercial Restrooms Water Closets IPC Tables E-103.3(2): Load Values Assigned to Fixtures a : Water Service Pipe : Maximum Distance of Fixture Trap from Vent : Hanger Spacing : Wet Vent Size : Maximum Flow Rates and Consumption for Plumbing Fixtures and Fixture Fittings : Minimum Size of Fixture Water Supply Pipes : Drainage Fixture Units for Fixtures and Groups (1): Building Drains and Sewers (2): Horizontal Fixture Branches and Stacks a : Above Ground Drainage and Vent Pipe : Application of Backflow Preventers E201.1: Minimum Size of Water Meters, Mains and Distribution Piping Based on Water Supply Fixture Unit Valves : Size and Developed Length of Stack Vents and Vent Stacks IRC Tables G : Roof Slope G2428.2(1), [504.2(1)]: Type B Double-Wall Gas Vent Appendix Appendix A: Types of Soil and Allowable Slopes Appendix B: Safety Guidelines and Terms Used in Grading Abbreviations vi DeWalt Plumbing Reference_CS4.indd 6 6/25/10 10:24 AM
Stookey. Significant Changes to the International Fire Code Edition
Stookey Scott Stookey Look Inside for These Outstanding Features: full-color detailed line art and photographs illustrate correct application of the code provisions and correct designs and installations
More informationBuilding Code Basics: Fire. Based on the 2009 International Fire Code
Building Code Basics: Fire Based on the 2009 International Fire Code 00704_00_fm_p00i-00xiv.indd Sec1:i 9/19/09 2:33:01 AM 00704_00_fm_p00i-00xiv.indd Sec1:ii 9/19/09 2:33:03 AM Building Code Basics: Fire
More informationMATERIALS Traps TRAPS. No. IPC IRC Description
MATERIALS Traps TRAPS MAX " MAX 0" No. IPC IRC Description 00. P0.6 00. P0.6 00. P0. 00. () P0.6 Exc. Vertical distance from fixture to the trap weir can not exceed ". Horizontal distance from the fixture
More informationIPC CODE AND COMMENTARY
2012 IPC CODE AND COMMENTARY 2012 International Plumbing Code Commentary First Printing: March 2012 ISBN: 978-1-60983-070-0 (soft-cover) COPYRIGHT 2012 by INTERNATIONAL CODE COUNCIL, INC. ALL RIGHTS RESERVED.
More informationCHAPTER 31. VENTS Reserved 2003 INTERNATIONAL RESIDENTIAL CODE 425R
CHAPTER 31 VENTS Reserved 2003 INTERNATIONAL RESIDENTIAL CODE 425R This page left intentionally blank. 426R 2003 INTERNATIONAL RESIDENTIAL CODE For SI: PIPE SIZE (inches) TABLE P3107.3 COMMON VENT SIZES
More information2009 IRC. and Fuel gas Provisions
2009 IRC Q &A Plumbing, MechanICAl and Fuel gas Provisions TABLE OF CONTENTS PREFACE... vii ABOUT THE INTERNATIONAL CODE COUNCIL...viii PLUMBING PROVISIONS... 1 CHAPTER 25 PLUMBING ADMINISTRATION....3
More information2009 IPC ,IMC Q &A ANDIFGC
2009 IPC,IMC ANDIFGC Q &A TABLE OF CONTENTS PREFACE.... ix ABOUT THE INTERNATIONAL CODE COUNCIL...x IPC CHAPTER 1 SCOPE AND ADMINISTRATION...1 Section 101 General... 1 Section 102 Applicability... 1 Section
More informationPLUMBING REQUIREMENTS
PLUMBING REQUIREMENTS This handout is a compilation of the standard requirements based on the State Plumbing Code and City Ordinance for projects of this type. This information sheet does not contain all
More informationSTACKS AND STACK VENTS
CHAPTER 9 VENTS SECTION 901 GENERAL 901.1 Scope. The provisions of this chapter shall govern the materials, design, construction and installation of vent systems. 901.2 Trap seal protection. The plumbing
More informationARTICLE 760 FIRE ALARM SYSTEMS
Mike Holt s Illustrated Guide to ARTICLE 760 FIRE ALARM SYSTEMS Based on the 2014 NEC Extracted from Mike Holt s Illustrated Guide to Understanding the National Electrical Code Volume 2 For more information
More informationMethods of Venting Plumbing Fixtures and Traps in the 2018 IPC
People Helping People Build a Safer World Methods of Venting Plumbing Fixtures and Traps in the 2018 IPC Installation, Flexibility and Opportunity for Savings Lee Clifton, Senior Director of PMG Resources,
More informationCHAPTER VI BUILDING PLUMBING
CHAPTER VI BUILDING PLUMBING 6.1. INTRODUCTION The chapter covers questions related to water demand, distribution and drainage. The basic principles for planning and installing common plumbing systems
More informationPLUMBING INSTALLATIONS
PLANNING, PROPERTY AND DEVELOPMENT DEPARTMENT PLUMBING INSTALLATIONS A homeowner guide to plumbing requirements for single-family dwellings November 2017 contents Permit Requirements... 3 Inspection Requirements...
More information1 Exam Prep Plumber s Handbook Tabs and Highlights
1 Exam Prep Plumber s Handbook Tabs and Highlights These 1 Exam Prep Tabs are based on the Plumber s Handbook Revised 2006. Each Tabs sheet has five rows of tabs. Start with the first tab at the first
More informationAPPENDIX L ALTERNATE PLUMBING SYSTEMS
ALTERNATE PLUMBING SYSTEMS L 1.0 General. L 1.1 Applicability. The intent of this appendix is to provide clarification of procedures for the design and approval of engineered plumbing systems, alternate
More informationI dedicate this book to the Lord Jesus Christ, my mentor and teacher. Proverbs 16:3 NOTICE TO THE READER ABOUT THE AUTHOR
NOTICE TO THE READER The publisher does not warrant or guarantee any of the products described herein or perform any independent analysis in connection with any of the product information contained herein.
More informationLevel I Chapter 1 Worksheet
Chapter 1 Worksheet 1. For applicability requirements of the Plumbing Code, refer to: a. Building Code b. Administration and Enforcement Code c. Plumbing Code d. Residential Code 2. The provisions of the
More informationRead Only Document Not For Distribution
Chapter 9 Indirect Waste Piping and Special Wastes 9.1 INDIRECT WASTES 9.1.1 General Drains from fixtures, fixture compartments, equipment, appliances, appurtenances, and other devices requiring protection
More informationPHCC Educational Foundation Plumbing Year 4
Assessment Blueprint PHCC Educational Foundation Plumbing Year 4 Post-Test Code: 7664 Copyright 2008. All Rights Reserved. General Assessment Information PHCC Educational Foundation Plumbing Year 4 General
More informationInstructIons for use A-dec 561 Cuspidor
Instructions for Use A-dec 561 Cuspidor Copyright 2014 A-dec Inc. All rights reserved. A-dec Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied
More informationCHAPTER 9 VENTS. run undiminished in size and as directly as possible from the building drain through to the open air above the roof.
CHAPTER 9 VENTS SECTION 90 GENERAL run undiminished in size and as directly as possible from the building drain through to the open air above the roof. 90. Scope. The provisions of this chapter shall govern
More informationAustralian/New Zealand Standard
AS/NZS 3500.4:2003 (Incorporating Amendment Nos 1 and 2) AS/NZS 3500.4:2003 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services AS/NZS 3500.4:2003 This Joint Australian/New
More informationResidential Construction Academy: Plumbing Books
Residential Construction Academy: Plumbing Books RESIDENTIAL CONSTRUCTION ACADEMY: PLUMBING, 2E is the ideal book to create a direct link between readers' education/training program and the residential
More informationAN ORDINANCE TO AMEND CHAPTER 7-BUILDING REGULATIONS, ARTICLE 1-UNIFORM CONSTRUCTION CODE, SECTION 7-2 -FEES TO ESTABLISH A NEW FEE SCHEDULE
1. BUILDING FEES: 1 AN ORDINANCE TO AMEND CHAPTER 7-BUILDING REGULATIONS, ARTICLE 1-UNIFORM CONSTRUCTION CODE, SECTION 7-2 -FEES TO ESTABLISH A NEW FEE SCHEDULE ESTABLISHMENT OF FEES PURSUANT TO N.J.A.C.
More informationCHAPTER 9 VENTS SECTION
CHAPTER 9 VENTS SECTION 901 GENERAL 901.1 Scope. The provisions of this chapter shall govern the materials, design, construction and installation of vent systems. 901.2 Trap seal protection. The plumbing
More informationSummary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016
Summary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016 Ohio Administrative Code Rule Number OPC Section IPC origin Reason for proposed 4101:3-2-01 Alternate on-site 2015 Added definition
More informationVirginia Residential Code
2015 Virginia Residential Code 2015 Virginia Residential Code First Printing: September 2018 ISBN: 978-1-60983-846-1 COPYRIGHT 2018 by INTERNATIONAL CODE COUNCIL, INC. ALL RIGHTS RESERVED. This 2015 Virginia
More informationEffective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationGARCIA GALUSKA DESOUSA Consulting Engineers
L#58619/Page 1/November 1, 2017 PLUMBING Executive Summary: Presently, the Plumbing Systems serving the building are cold water, hot water, sanitary, waste and vent system, storm drain piping, and natural
More informationIPC Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.
IPC Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A vent stack handling 25 dfu s with a developed length of 35 feet shall be inches minimum
More informationASME STANDARDS IN MODEL CODES
STANDARDS IN MODEL CODES ASME Name Model Code With Year of Referenced IPC IRC UPC 2009 NSPC A112.1.2 Air Gaps in Plumbing 2004 2004 2004 2004 A112.1.3 Air Gap Fittings For Use With Plumbing, Appliances
More informationTABLE OF CONTENTS. Part I Administrative... 1
Part I Administrative............................ 1 CHAPTER 1 ADMINISTRATION............... 1 R101 Title, Scope and Purpose.................... 1 R102 Applicability.............................. 1 R103
More informationProVent Systems Plumbing Fundamentals. Educational Literature. Comparison of ProVent Design Rules and The International Plumbing Code
ProVent Systems Plumbing Fundamentals Educational Literature Comparison of ProVent Design Rules and The International Plumbing Code Guide to Contents Topics and Descriptions Page Interior views of the
More informationRead Only Document Not For Distribution
Chapter 5 Traps, Cleanouts and Backwater Valves 5.1 SEPARATE TRAPS FOR EACH FIXTURE a. Plumbing fixtures shall be separately trapped by a water seal trap placed as close as possible to the fixture outlet.
More informationInstructions for Use. A-dec 461 Cuspidor with Support Center
Instructions for Use A-dec 461 Cuspidor with Support Center A-dec 461 Cuspidor with Support Center Instructions for Use Copyright 2014 A-dec Inc. All rights reserved. A-dec Inc. makes no warranty of any
More informationIPC Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.
IPC Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. The minimum air gap for a fixture with an effective open of 1/2", located away from a
More informationSystem Requirements and Supported Platforms for Oracle Real-Time Decisions Applications. Version May 2008
System Requirements and Supported Platforms for Oracle Real-Time Decisions Applications Version 2.2.1 May 2008 Copyright 2008, Oracle. All rights reserved. Part Number: E12184-01 The Programs (which include
More informationLand Use and Environmental Service Agency (Code Enforcement) Plumbing 2010
General: 1) (Q) Who enforces the cutting and notching requirements found in the plumbing code? (A) The plumbing inspector would question the contractor initially. A building inspector would either take
More informationICP Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.
ICP Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A 1 inch diameter faucet, where the inside edge of the spout opening is 2.5 inches away
More informationPipe Sizing Table. Hydraulic Load Served (fixture units)
MODULE 1 INTRODUCTION Notes: A Pipe Type Horizontal branch Pipe Sizing Table Hydraulic Load Served (fixture units) Size (in.) Code Reference 2 + 1.5 = 3.5 2 7.4.9.1.(1) B Soil stack 13.5 + 13.5 = 27 3
More informationMatrix of changes for the National Standard Plumbing Code July 2013
Matrix of changes for the National Standard Plumbing Code July 2013 Item # Section Number Person Submitting Change Committee Action 10-77 10.20.8 and Table 3.1.3 XI Certification 10-82 12.16 Size and Lengths
More informationAustralian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
More informationXRRS Specification Fire Ready Hood
XRRS Specification Fire Ready Hood ************************************************************************************************************************ Note to User: This document is subject to copyright
More information2016 Plumbing Supplemental Plan Review List
Building Division 555 Santa Clara Street Vallejo CA 94590 707.648.4374 2016 Plumbing Supplemental Plan Review List POTABLE WATER SYSTEM P1. Specify which fixtures are for private use and which are for
More informationTest Code: 8117 / Version 1
Pennsylvania Customized Assessment Blueprint Plumbing Technology/Plumber PA Test Code: 8117 / Version 1 Copyright 2012. All Rights Reserved. General Assessment Information Plumbing Technology/Plumber PA
More informationMAJOR APPLIANCES Installing, Troubleshooting, and Servicing Jim Johnson
MAJOR APPLIANCES Installing, Troubleshooting, and Servicing Jim Johnson Preview Copy Esco Press Mount Prospect, IL Library of Congress Cataloging-In-Publication Data Johnson, Jim Major Appliances: Installing,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
More informationFlorida Building Code 5 th Edition (2014) Building. Broward County Edition Loose-leaf Supplement
Board of Rules and Appeals FBC 5 th Edition (2014)- Building - Supplement No. 1 June 30, 2015 Florida Building Code 5 th Edition (2014) Building File removed pages for reference. Broward County Edition
More informationSAFETY PLUMBING PACKAGES. Quality Products & Value Packages SUSTAINABILITY. Residential Solutions ANTI-SCALE SYSTEMS FIRE PROTECTION
Quality Products & Value Packages Residential Solutions FIRE PROTECTION COMFORTSUSTAINABILITYCONTROL PRESSURE REGULATORS TRENCH DRAINSHVAC SYSTEMS SAFETY ANTI-SCALE SYSTEMS HEATING & COOLING CONTROLS PLUMBING
More informationPlumbing. Definitions. Background Factors. Air Chambers. Air Gap (Drainage System) Air Gap (Water Distribution System) Air Lock.
Plumbing Plumbing may be defined as practice, materials, and fixtures used in the installation, maintenance, and alteration of all piping, fixtures, appliances, and appurtenances in connection with sanitary
More informationRead Only Document Not For Distribution
Chapter 14 Special Requirements For Health Care Facilities 14.1 GENERAL This Chapter applies to special fixtures and systems that occur in health care facilities and to the special plumbing requirements
More informationUnderwood Heater Installation Manual
Underwood Heater Installation Manual Contents Important Safeguards and Warnings... 3 1 General Information... 3 1.1 Use of the Manual... 3 1.2 Safety Guidelines... 3 1.3 Remember to measure resistance...
More informationAPPENDIX J ILLUSTRATIONS
The following figures have been included in the 1994 edition of the Standard Plumbing Code to aid in interpreting this code. The figures are not to be construed as superseding the written text, but merely
More informationPractical Fundamentals of Heating, Ventilation and Air Conditioning (HVAC) for Engineers and Technicians
Presents Practical Fundamentals of Heating, Ventilation and Air Conditioning (HVAC) for Engineers and Technicians Revision 11.2 Website: www.idc-online.com E-mail: idc@idc-online.com IDC Technologies Pty
More informationBUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT
BUILDING MATERIALS EVALUATION COMMISSION (BMEC) AUTHORIZATION REPORT DATE OF AUTHORIZATION June 28, 2001 BMEC REFERENCE BMEC # 01-07-259 BMEC APPLICATION # BMEC #A 2001-10 OATEY CANADA INC. SURE-VENT AND
More informationSCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING
SCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING 3300 SUMMIT BOULEVARD WEST PALM BEACH, FLORIDA 33406 TEL (561) 688-7687 FAX (561) 688-7654 http://www.palmbeach.k12.fl.us/fm/bd/index.htm
More informationPlumbing Technology/Plumber CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY IN THE TRAINING LABORATORY 101 Follow rules for fire safety. 102 Follow rules for housekeeping safety. 103 Follow shop rules. 104 Follow rules for
More informationAustralian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508
AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial
More informationD. The work addressed in this section consists of a fire protection system, which may include coordination with one or more of the following:
PART 1 GENERAL 1.01 Scope of Standard A. This standard provides general requirements of Sam Houston State University for the design and construction of standpipe systems to include combination standpipe
More informationAS/NZS :2015. Plumbing and drainage AS/NZS :2015. Part 4: Heated water services. Australian/New Zealand Standard
AS/NZS 3500.4:2015 Incorporating Amendment No. 1 Australian/New Zealand Standard Plumbing and drainage Part 4: Heated water services Superseding AS/NZS 3500.4:2003 AS/NZS 3500.4:2015 AS/NZS 3500.4:2015
More informationBuilding Utilities 1 Plumbing and Sanitary Systems
Building Utilities 1 Plumbing and Sanitary Systems Taken from UST Architecture exams by Arch. Rafael Alli Recommended review material for UST Preboard Exam Prepared by: arkireviewph.multiply.com Types
More informationCRAFTSMAN EXAMINATION, JUNE 2007 PLUMBING ANSWER SCHEDULE
No. 9195 CRAFTSMAN EXAMINATION, JUNE 2007 PLUMBING ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2007. All rights reserved. No part of this publication may be reproduced by any means without
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE
ICC-ES Report PMG-1083 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE DIVISION: 22 00 00 PLUMBING SECTION: 22 13
More informationChapter 4: Fixtures, Faucets & Fittings:
Table of Contents Chapter 1 Administration 0 Chapter 2 Definitions 0 Chapter 3 General Regulations 0 Chapter 4 Fixtures, Fau & Fit. 12 Chapter 5 Water Heaters 14 Chapter 6 Water Supply & Dist. 10 Chapter
More informationAustralian/New Zealand Standard
AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared
More informationTABLE OF CONTENTS. CHAPTER 2 DEFINITIONS General Applicability Definition of Terms General...
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION................1 101.0 Title, Scope, and General...........1 101.1 Title............................1 101.2 Purpose.........................1 101.3 Plans Required...................1
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationA GUIDE TO PASSING THE PLUMBING EXAM
A GUIDE TO PASSING THE PLUMBING EXAM BASED ON THE INTERNATIONAL PLUMBING AND FUEL GAS CODES WRITTEN BY JOHN WHITE REVISED 2014 2007-2014 This manual is the sole property of Energy Marketing Services. No
More information(HSTAT Series) Instruction Manual
Silicone Rubber Heating Tapes with Adjustable Thermostat Control (HSTAT Series) Instruction Manual Read and understand this material before operating or servicing these heating tapes. Failure to understand
More informationCOMMERCIAL PERMIT APPLICATION AND CHECKLIST. Depending on the scope of your project, the following submittal requirements will apply:
Planning/Building Department 115 Ramsdell Street Fircrest WA 98466 (253) 564-8902 COMMERCIAL PERMIT APPLICATION AND CHECKLIST Depending on the scope of your project, the following submittal requirements
More informationSpecial Requirements For Health Care Facilities
Chapter 14 Special Requirements For Health Care Facilities 14.1 GENERAL This Chapter applies to special fixtures and systems that occur in health care facilities and to the special plumbing requirements
More informationSUBCOURSE EDITION EN5155 US ARMY ENGINEER SCHOOL CLEAR WASTE SYSTEM STOPPAGES PLUMBING VI
SUBCOURSE EDITION EN5155 A US ARMY ENGINEER SCHOOL CLEAR WASTE SYSTEM STOPPAGES PLUMBING VI US ARMY PLUMBER MOS SKILL LEVELS 1 and 2 COURSE CLEAR WASTE SYSTEM STOPPAGES SUBCOURSE NO. EN5115 US Army Engineer
More informationISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels
INTERNATIONAL STANDARD ISO 3864-2 First edition 2004-10-15 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Symboles graphiques Couleurs de sécurité
More informationSTATE OF RHODE ISLAND AND PROVIDENCE PLANTATIONS
RHODE ISLAND STATE BUILDING CODE SBC-4 State Mechanical Code Effective August 1, 2007 Replaces Regulation SBC-4 Dated September 1, 2004 STATE OF RHODE ISLAND AND PROVIDENCE PLANTATIONS Department of Administration
More informationCombined Hand-Washing Systems
IAPMO IGC 127-20142018 PUBLIC REVIEW DRAFT Combined Hand-Washing Systems IAPMO Standard IAPMO IGC 127 20142018 Published: January 2014 Previous Editions: January 2014, July 2013, April 2013, April 2009,
More informationEmbedded Linux with VAR-SOM-MX6 Course
VARISCITE LTD. VAR-SOM-MX6 Embedded Linux with VAR-SOM-MX6 Course 2017 Variscite Ltd. All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval system, or transmitted,
More informationCUSTOMIZED TEACHER ASSESSMENT BLUEPRINT PLUMBING. Test Code: 5924 Version: 01
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT PLUMBING Test Code: 5924 Version: 01 Specific competencies and skills tested in this assessment: Safety Follow rules for fire safety Follow rules for housekeeping
More informationDesign & Construction Standards, Revised January
PART 1 GENERAL 1.01 Scope of Standard A. This standard provides general requirements of The University of Texas at Austin for the design and construction of standpipe systems to include combination standpipe
More informationModular Grease Trap MGTA
Modular Grease Trap MGTA and MGTA) Installation Requirements Installation Water Requirements Corporation Water Corporation 22 Ethel Ave Brookvale NSW 2100 Postal: PO Box 255 Collaroy NSW 2097 Freecall
More informationTHE CITY OF NORTH RIDGEVILLE 7307 AVON BELDEN ROAD, NORTH RIDGEVILLE, OHIO TELEPHONE: (440) FAX: (440) Building Department
7307 AVON BELDEN ROAD, NORTH RIDGEVILLE, OHIO 44039 TELEPHONE: (440) 353-0822 FAX: (440) 353-0823 INSTRUCTIONS FOR SWIMMING POOLS REQUIREMENTS FOR PERMIT: Completed application form Plot plan showing lot
More informationPLUMBING CURRICULA OUTLINE
PLUMBING CURRICULA OUTLINE CORE CURRICULUM 2015 Basic Safety (Construction Site Safety Orientation) (12.5 Hours) (Module ID 00101-15) Presents basic jobsite safety information to prepare workers for the
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationIs Sewer Gas Giving Your Customers the Wrong Impression?
Is Sewer Gas Giving Your Customers the Wrong Impression? Prepared by Dialectic INTRODUCTION We ve all been there. You walk into a public restroom and you immediately wonder if one of the toilets is overflowing.
More informationAccessories for SMA Inverters Fan Retrofit Kit FANKIT02-10
Accessories for SMA Inverters Fan Retrofit Kit FANKIT02-10 Installation Manual FANKIT02-IA-US_en-10 IMUS-FANK-TL21 Version 1.0 CA US SMA America, LLC Legal Restrictions Legal Restrictions Copyright 2013
More information3820, 3820i, 4820, 4820i
3820, 3820i, 4820, 4820i Cordless Imaging Systems Quick Start Guide Note: Refer to your user s guide for information about cleaning your device. For localized language versions of this document, go to
More informationGulfport, Mississippi 21 May 2007
G PLUMBING GENERAL REQUIREMENTS The D-BC shall design the plumbing system to comply with this criteria and the Plumbing Code. Piping shall be shown on the same plan as the fixtures being served. Pipe size
More informationOracle Retail Merchandising System Release Notes Release 12.0 May 2006
Oracle Retail Merchandising System Release Notes Release 12.0 May 2006 Copyright 2006, Oracle. All rights reserved. The Programs (which include both the software and documentation) contain proprietary
More informationPre-Drywall Property Inspection
Pre-Drywall Property Inspection Information Date: 1/20/2014 Weather: Clear Sky Time: 8:15 am Buyers: Hans Nirmal Property Address: 2563 Forest Breeze Drive City: Frisco Realty Company: Associate: Mike
More informationOPERATION & INSTALLATION MANUAL
OPERATION & INSTALLATION MANUAL Model: SIO 14 & SIO 18 Electric Tankless Hot Water Generators Table of Contents SAFETY INFORMATION... 1 INTRODUCTION... 2 Unit Operation:... 2 Unit Freezing:... 3 Maintenance:...
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR EARLY-CLOSURE REPLACEMENT FLAPPERS OR EARLY-CLOSURE REPLACEMENT FLAPPER WITH MECHANICAL ASSEMBLIES IAPMO
More informationADT Security Website Terms of Use
ADT Security Website Terms of Use Last revised: August 30, 2012 These ADT Website Terms and Conditions of Use (the "Terms") govern your use any websites that are owned or operated by ADT LLC, d/b/a ADT
More informationStandpipe Systems for Fire Protection
Standpipe Systems for Fire Protection Kenneth E. Isman Standpipe Systems for Fire Protection Kenneth E. Isman University of Maryland College Park, MD, USA ISBN 978-3-319-47749-7 DOI 10.1007/978-3-319-47750-3
More informationLand Map Number BUILDING PERMIT # PROJECT Street Address: Owner: Street Address: City State Zip Phone. Building Contractor: Street Address:
RESIDENTIAL BUILDING PERMIT PERMIT APPLICATION PROJECT Street Address: Owner: _ Street Address: City State_ZipPhone_ Building Contractor: Street Address: City State_ZipPhone_ State Card Holder s Name:
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationMAXI-VENT Air Admittance Valve
MAXI-VENT Air Admittance Valve Manufacturer: Studor, Inc. Connec on Size: 3 or 4 Model #: MAXI VENT Item #: 20302 An air admittance valve shall be acceptable as a vent termination for any individual vent,
More informationAustralian/New Zealand Standard
AS/NZS 2033:2008 AS/NZS 2033:2008 Australian/New Zealand Standard Installation of polyethylene pipe systems AS/NZS 2033:2008 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationFood Establishment Guidelines. Food Service Plan Review
Food Service Plan Review Food service plan review in the City of Grand Prairie begins at the Environmental Services Department at the Development Center, 201 NW 2 nd Street in Suite 100. The City of Grand
More informationCCC 2018 GROUP A PROPOSED CHANGES TO THE I-CODES COLUMBUS COMMITTEE ACTION HEARINGS. April 15 23, 2018 Columbus Convention Center Columbus, Ohio
CCC 2018 GROUP A PROPOSED CHANGES TO THE I-CODES COLUMBUS COMMITTEE ACTION HEARINGS April 15 23, 2018 Columbus Convention Center Columbus, Ohio First Printing Publication Date: February 2018 Copyright
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet
More informationDenotes a new question! Denotes a revised/revisited question. September 2009 General:
General: 1) (Q) What does a contractor/permit holder have to supply for an inspection? (A) Section 107.2 of the NC Administrative Code states that it is the duty of the permit holder to provide access
More information