All sinks and lavatories shall be permanently marked to identify the
|
|
|
- Leslie Chapman
- 5 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: not available Pagemill Road Dallas, TX Identification: All sinks and lavatories shall be permanently marked to identify the manufacturer, private brand name or trademark. The product shall also bear the cupc certification mark. Characteristics: Copper or aluminum alloy sinks and lavatories to be installed per the manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada Products are in compliance with the following standard(s): This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing.
2 IGC a MODELS: Kitchen Sinks SC-WIN-22 SC-WDE-22 SC-WIN-25 SC-WIN-30 SC-WIN-33 SC-WINR-33 SC-WIN-36 SC-WDE-33 SC-WD64-33 SC-WD64-36 SC-NTS-33 SC-NTD-33 SC-HPT-22 SC-HPT-25 SC-HPT-30 SC-HPT-33 Kitchen sink rectangle 22"x 18"x 7" deep with a 2" continuous flange Kitchen sink rectangle 22"x 18"x 7" deep with a 2" continuous flange. Inside dims: 9" x 13" each side Kitchen sink rectangle 25"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 30"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 24" x 9-3/8"deep with a 2" continuous flange. Rounded Front Kitchen sink rectangle 36"x 22" x 9-3/8"deep with a 2" continuous flange Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 16" x 11-1/2" x 9-1/4" deep; the left side is 18" x 16-3/8" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18"x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 19"x 18"x 9-1/4" deep; the left side is 12"x 11"x 9-1/4" deep Kitchen sink rectangle 33"x 22"/24" x 10"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22"/24" x 10"deep with a 2" continuous flange. 12"x 16" x 9-3/8 left, 16"x 19"x 9-3/8" rt Kitchen sink rectangle 22"x 16"x 7" deep with a 2" continuous flange unit has 3-9/16" center outlet Kitchen sink rectangle 25"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 30"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22" x 9-3/8"deep with a 2" continuous flange
3 Kitchen Sinks (cont.) SC-WTB-33 SC-VAN-33 SC-HPT-36 SC-WTB-36 SC-VAN-36 SC-HDE-33 SC-HPTBF-33 SC-HD64-33 SC-WDE-36 SC-WD64-33 SC-HPT-36 SC-HD64-36 Kitchen sink rectangle rounded front 33"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front with flat sides 33"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 36"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front 36"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front with flat sides 36"x 24" x 9-3/8"deep with a 2" continuous flange Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 13.5" x 18" x 9-1/4" deep; the left side is 13.5" x 18" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape with butterfly back, 33"x 22", right side is 13.5" x 18" x 9-1/4" deep; the left side is 13.5" x 18" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18"x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 15"x 18"x 9-1/4" deep; the left side is 15"x 18"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18" x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 15"x 18"x 9-1/4" deep; the left side is 15"x 18"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 19"x 18"x 9-1/4" deep; the left side is 12"x 11"x 9-1/4" deep Designs on Apron: WV-Wabash, HPF-Hand Painted Flowers, FRT-Fruit Swag, PCN-Pinecones, LVS-Leaf, FRM-Animal Farm, CTF-Country Farm, KC-Norwich, RVT-Saxon, DDS-Dada Scroll, RYS-Royal Scroll, IMS-Iman Scroll, LIO-Lyonesse Scroll, GVN-Grapes on Vine, BLF-Blossoming Flowers, SRL-Winged Scroll, VTS-Victorian Scroll. Designs on Apron: FDE-Fleur De Lis, LIO-Lion Head Scroll, DAS-Dada Scroll, FFS-Fruit and Floral Scroll, WGS-WInged Scroll, GVE-Grapevine, CLP-Clavo Panels, FWS-Flower Scrol, CHS-Cherub Scroll,
4 FLS-Floral Scroll, CWS-Crown Scroll, ORS-Ornate Scroll. Trough Sinks SC-ALG-30 SC-CHP-17 SC-CHP-24 SC-CHP-35 SC-CHP-45 SC-CHPR-45 SC-CHPD-45 SC-YK-40 SC-ALG-50 Retangle Kitchen Trough- 30" x 11" x 2.75"to 5.5" deep with a 2" or 3-5/8" end Retangle Kitchen Trough- 17" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 24" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 35" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Half Round Kitchen Trough- 44" x 11" x 5" deep with a 1-5/8", 2" or 3-5/8" center Rectangle Kitchen Trough- 50" x 11" x 2.75"to 6" deep with a 2" or 3-5/8" End Bar Sinks SC-SON-13 SC-SON-15 SC-SON-18 SC-BOS-15 SC-BOS-18 SC-BOSR-15 Square bar sink 13''x 6.5''deep, unit has a 2" center outlet. Unit has a 1-in continuous flange Square bar sink 15''x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 18''x 7.5''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 15"x 6" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 18"x 7" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Rectangle bar sink 16"x 12"x 6.5" deep, unit has a 2" or 3-9/16"
5 SC-SHA-19 SC-TRN-10 SC-TRN-16 SC-TRND-16 SC-TRN-19 SC-SHO-16 SC-SHOA-16 center outlet. Unit has a 1.5-in continuous flange Rectangle bar sink 18"x 13"x 6" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Round bar sink 10''x 5''deep, unit has a 2" center outlet. Unit has a 1-in continuous flange Round bar sink 16''x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange. Designs included: INF-Infinity Sun, G-Grapes, F-Floral Round bar sink 16''x 14" x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Round bar sink 19-1/4 x 8" deep with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Hex bar sink 16"x 7" deep with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Hex bar sink 16"x 7" deep 3.5" apron, with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Rectangle bar sink 21"x 15.25"x 9" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Lavatory Sinks SC-CL-11 SC-CL-15 SC-CL-17 SC-HER-17 SC-CBG-12 SC-OOV-13 SC-OOV-15 SC-OOV-17 SC-CZO-12 SC-CZO-16 11" x 8-1/4"x 8-1/4" x 2-1/2" deep, center outlet 1-5/8", no overflow is provided on unit tested. Designs included: 15"x 12.25"x 5" deep, center outlet 1-5/8". Designs included 17"x 15"x 5" deep, center outlet 1-5/8". Designs included 17-1/2" x 14-1/8" x 5"deep, with a 1" continuous flange, unit has a center outlet 1-5/8". No overflow is provided on tested. Designs included 12"x 4.25" center outlet 1-5/8". Designs included Oval lavatory vessel-13"x 10.25"x 5" deep, center outlet 1-5/8" Oval lavatory vessel-15"x 12"x 5" deep, center outlet 1-5/8" Oval lavatory vessel-17"x 12"x 5" deep, center outlet 1-5/8" Round lavatory vessel-12"x 12"x 4" deep, center outlet 1-5/8". Copper Handles extend out 1.5" each side Round lavatory vessel-16"x 5" deep, center outlet 1-5/8". Copper Handles extend out 1.5" each side
6 SC-CZOD-16 SC-CBG-15 SC-CBG-17 SC-CRS-17 SC-CHE-17 SC-OR-17 SC-OR-14 SC-BMG-12 SC-FRV-13 SC-FRV-16 SC-STM-16 SC-BLR-13 SC-ARM-14 SC-ARD-16 SC-ARR-16 SC-OOV-13 SC-OOV-15 SC-OOV-17 SC-CLF-17 SC-RBV-17 SC-ARS-16 SC-ARS-14 SC-CL-19 SC-HER-19 SC-MC-21 SC-SVN-20 SC-CIM-16 SC-CBF-19 SC-REG-20 Deep-Round lavatory vessel-16"x 7" deep, center outlet 1-5/8". Copper Handles extend out 2" each side 15"x 6" center outlet 1-5/8". Designs included 17"x 7" center outlet 1-5/8". Designs included 17"x 9" center outlet 1-5/8". Designs included 17"x 17"x 7" deep, 1-1/2" apron. Center outlet 1-5/8" 16"x 16"x 7" deep, 3-1/2" apron. Center outlet 1-5/8" 13.4"x 5" deep, 3-1/2" apron. Center outlet 1-5/8" Round lavatory double thick vessel- 15"x 7" deep, Double thick bowl. Center outlet 1-5/8" Round lavatory vessel- 13"x 13"x 3.5" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 4.5" deep, Center outlet 1-5/8" Round lavatory vessel- 8"x 8"x 3.5" deep, Center outlet 1-5/8" Round lavatory vessel- 11.5"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 13"x 13"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 14"x 14"x 4" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 3.5" deep, Center outlet 1-5/8" Oval lavatory vessel- 13" x 10" x 3", Center outlet 1-5/8" Oval lavatory vessel- 15.5"x 12.5"x 5.5", Center outlet 1-5/8" Oval lavatory vessel- 17.5"x 12.5"x 5", Center outlet 1-5/8" Square lavatory- 17.5"x 5" Center - 6" Ends, Center outlet 1-5/8" Square lavatory vessel 17"x17"x4.5" Center outlet 1-5/8". 4.5" apron 16"x 16"x 3.5" Center outlet 1-5/8" 15"x 15"x 5" deep, Center outlet 1-5/8" 19"x 14"x 5" deep, center outlet 1-5/8". Designs included 17"x 14"x 5" deep, center outlet 1-5/8". Designs included 21"x 14"x 5" deep, 1.5" apron, center outlet 1-5/8" 20"x 17''x 5" deep, 3.5" apron, center outlet 1-5/8" 18"x 12"x 4.5"/6.25" deep, center outlet 1-5/8" 21"x 14"x 5.5" deep, 1-1/2" apron. Center outlet 1-5/8" 20.5"x 17.75"x 5", 3.5" apron. Center outlet 1-5/8".2 SUFFIX DESIGNS FOR LAV SINKS: BWR-Barbwire, RPL-Ripple, FBD-Floral Band, FDI-Fleur De Lis, HRH-Horse Head, HSO-Horseshoes, FLV-Floral Vine, RIB-Ribbed, FRN-Fernale, SCL-Scallop, BLK-Block, STR-Stars, FLS-Floral Swag, JNR-Joining Rings, BBQ-Baroque, IFS-Infinity Sun, BRD-BullRider,
7 PCO-Pinecone, LRH-Longhorn, FRG-Frog, DFY-Dragonfly SUFFIX DESIGNS FOR BAR SINKS: GVN-Grapevine, OLV-Olive Branch, PCN-Pinecone, BBQ-Baroque, GRP-Grapes, STR-Star, TXS-Texas Star, LCV-Lucky Clover, FSH-Fish, GKO-Gecko, FRG-Frog, HRH-Horse Head, FLE- Flure De Lis, IFS-Infinity Sun, DRY-Dragonfly, PIN-Pinecones
Effective Date: May Rev. 1/31/2018- Void After: May Product: Plumbing Fixtures (Stainless Steel) File No. 6088
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: January 2018 Void After: January Product: Plumbing Fixture Fittings File No. 6354
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: June 2017 Void After: June Product: Plumbing Fixture Fittings File No. 4995
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: not available Void After: Product: Plumbing Fixture Fittings File No. 4079
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October 2018 Void After: October 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: July 2017 Void After: July Product: Plumbing Fixture Fittings File No. 4472
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: December 2017 Void After: December Product: Outlet Boxes (Washing Machine) File No. 2150
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: September 2017 Void After: September 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: December Rev. 3/12/2018- Void After: December Product: Lead Free Plumbing Products File No. 6661
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October Rev. 12/15/2017- Void After: October Product: Lead Free Plumbing Products File No. 6441
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: July Rev. 1/26/2018- Void After: July Product: Plumbing Fixture Fittings File No. 3474
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Certificate of Compliance
Certificate of Compliance Certificate: 1852750 Master Contract: 214418 Project: 2501914 Date Issued: February 27, 2012 Issued to: 11160 Grace Ave Fountain Valley, CA 92708 USA Attention: Hiroshi Ichikawa
EVALUATION SUBJECT: PLUMBING SUPPLY FITTING
ICC-ES Report PMG-1130 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION
Effective Date: August Rev. 12/22/2017- Void After: August Product: Plumbing Fixture Fittings File No. 4318
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES.
ICC-ES Report PMG-1095 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: WATER CLOSET,VITREOUS CHINA WATER CLOSET WITH DUAL FLUSH DEVICE, VITREOUS CHINA LAVATORIES, VITREOUS
Trap Seal Primers and Water Hammer Arrestors TSP-2015 Go to for the most current product specification sheets.
www.mifab.com TSP-2015 Go to www.mifab.com for the most current product specification sheets. Trap Seal Primers and Water Hammer Arrestors LIT-062, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109,
EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-ES Report PMG-1132 Reissued 04/2018 This report is subject to renewal 04/2019 EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION
Plumbing. September 8, 2018 Prices and product availability are subject to change without notice. 32" Curved Shower Pan with Round Front - Parchment
Page 1 of 19 Plumbing 32" Shower Surround with Wainscot Design - 32" Curved Shower Pan with Round Front - $128.00 (df-323244891) Dual Lever Pull Out Spout Kitchen Faucet - Venetian Bronze $108.74 (725110-VB)
Wireless Weather Station. Table of Contents
Wireless Weather Station Model: T83646v2 Instructional Manual DC:071916 For online video support: http://bit.ly/laxtechtalk Table of Contents LCD Features... Buttons... Setup... Set Time, Date etc....
SECTION CUSTOM FABRICATED FOODSERVICE EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 40 11 CUSTOM FABRICATED FOODSERVICE EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in
Refresh. Your Furniture. Design with attitude, make over your home. March 2015 Spring Collections Furniture Appliqués.
Refresh Your Furniture Design with attitude, make over your home March 2015 Spring Collections Furniture Appliqués www.efexusa.com 54 8 11 12 TABLE OF CONTENTS 15 18 19 23 5 Bows 8 Corners 11 Ceilings
Effective Date: February Rev. 6/28/2018- Void After: February Product: Plumbing Fixture Fittings File No. 1285
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS
ICC-ES Report PMG-1280 Reissued 10/2016 This report is subject to renewal 10/2017 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES SECTION: 22
EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE
ICC-ES Report PMG-1083 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE DIVISION: 22 00 00 PLUMBING SECTION: 22 13
EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING.
ICC-ES Report PMG-1367 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION AND CONTROL
FLAME ITEM PART NO CLIENT REF. NO. DESCRIPTION DESIGNATION MANUFACTURER CLASS UL FILE NO.
BOM FOR UL CERTIFICATE NUMBER Model Name: CLASSIC TOWER LIGHT Documents Number 122-EI04 This is to certify that the above product was supplied to SUZO Internation (NL) BV Revision A2 are made of the followings,
It s that special time of the year when
2017 Catalog It s that special time of the year when we proudly introduce to you our latest catalog. Our new introductions for 2017 will showcase dramatic design upgrades to our kinetic spinner collection.
INSTITUTIONAL QUICK RESPONSE/QREC FLUSH PENDENT SPRINKLER VK410 (K5.6) TECHNICAL DATA
Page 1 of 8 1. PRODUCT DESCRIPTION Viking Institutional Style Quick Response Standard Coverage/Extended Coverage Flush Pendent Sprinklers are small, flush, solder link and lever sprinklers made with tamper-resistant
ST BRONCO RIDER ROPER COWGIRL BULL RIDER NATIVE AMERICAN CHIEFTAN
12538 BRONCO RIDER 12234 ROPER 12539 COWGIRL 12541 12544 BULL RIDER NATIVE AMERICAN CHIEFTAN ST90 2007 12543 10008R (RIGHT) 12540 SAGUAR0 CACTUS ( CARNEGIEA GIGANTEA) 12542 PRICKLY PEAR ( OPUNTIA) CACTUS
INSTITUTIONAL QUICK RESPONSE FLUSH HORIZONTAL SIDEWALL SPRINKLER VK412 (K5.6) TECHNICAL DATA
August 14, 2013 Sprinkler 126k 1. PRODUCT DESCRIPTION Viking Institutional Style Quick Response Flush Horizontal Sidewall Sprinklers are small, flush, solder link and lever sprinklers made with tamper-resistant
RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM
RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM Customer: Ameri-Kart Corp. Class: Potable Water Holding Tanks, Waste Holding Tanks, Shower Pans, Bathtubs, Sinks Location: Cassopolis, Michigan Bristol,
INSTITUTIONAL QUICK RESPONSE FLUSH HORIZONTAL SIDEWALL SPRINKLER VK412 (K5.6) TECHNICAL DATA
Sprinkler 126k Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com 1. PRODUCT DESCRIPTION Viking Institutional Style Quick Response Flush Horizontal
Rolling Door Parts Program Information Package
Rolling Door Parts Program Information Package ANNOUNCEMENT Entrematic is proud to announce our new Rolling Door Parts Program. Entrematic is now a Cornell Ironworks (CIW) Service Star Dealer with the
freedom residential flush pendent sprinkler vk476 (K4.9)
January 6, 2010 Sprinkler 145h 1. DESCRIPTION Viking Freedom Residential Flush Pendent Sprinkler VK476 is a small high-sensitivity fusible element residential sprinkler designed for installation on concealed
section contents high relief mon reale back bands base casing crown friezes panel molds
section contents embossed chair rail... 358 crowns & cornices... 352 decorative white wood - rack program... 361 elegant additions... 364 oak & poplar base... 351 panel molds... 360 poplar back bands...
monty 4200 Truck Tire Changer Spare Parts list
monty 4200 Truck Tire Changer Spare Parts list Date 08/12/09 Figure 1 Baseframe Date 08/12/09 Page 2 Monty 4200 Spare Parts list Figure 2A Carriage with Mounting Arm Date 08/12/09 Page 3 Monty 4200 Spare
BLASTMASTER 1600 CFM AIR DRYER
BLASTMASTER 600 CFM AIR DRYER PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
SN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Reliable Push Button Activated Air Metering, Infrared, or TouchTime Control Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height
2235 E. Rose Garden Loop Phoenix, AZ Ph (866) Fx (800) Product Catalog
2235 E. Rose Garden Loop Phoenix, AZ 85024 Ph (866) 395 8377 Fx (800) 211 6444 www.linkasink.com Product Catalog V020 DB or WC Exterior Finish Pattern Style (A, E, F or G only) Stone Colors (13, 14, 15,
Warning Genuine Counterfeit Electrical Product
Counterfeit and Non-Compliant Communications Cable Warning Genuine Counterfeit Electrical Product May be hazardous to people and property. Possible Results Include Property Damage, Electrocution, Burnt
TKQ Heirloom Traditions Collection. TKQ Collection # 6. Item #366 - $500
www.tkquilting.com TKQ Heirloom Traditions Collection TKQ Collection # 6 tammy@tkquilting.com 104 digitized pattern set by Tammy Finkler Item #366 - $500 The patterns in the following pages are included
Embossed / High Relief / Hand Carved Mantels
EMBOSSED / HIGH RELIEF / HAND CARVED MANTELS Embossed / High Relief / Hand Carved Mantels Great Definition and Stainability at an Affordable Price. EMBOSSED / HIGH RELIEF / HAND C ARVED MANTELS Embossed
Copyright Tammy Finkler All Rights Reserved
#2008E TKQ Blossoms N Lace Medallion Block #2009 Donnas Block Sets:339 345 #2009A Donnas Block Half Sets:339 345 #2009B Donnas Block Quarter Sets:339 345 #2009C Donnas Block Triangle P2P Sets:339 345 #2009D
Projection Alarm Clock
Projection Alarm Clock Model: W8923v2 Instructional Manual DC: 0676 For online video support visit: http://bit.ly/laxtechtalk Table of Contents LCD Features... Buttons... Setup... Set Time, Date, etc....
TABLE 1. Specifications: Dimensions: 6¼ x 9 5/8 x 2 ¾
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
SN2003, SN2023, SN2004, SN2024 Sentry Semi-Circular Shallow Bowl Washfountain
SN2003, SN2023, SN2004, SN2024 cupc Certified Available with Infrared, Air or TouchTime Available in a 54" or 36" Bowl Size Wall-Mounted or Floor-Mounted Standard Height Models and Juvenile Height 54"
Bombardier CL-415 Wing span :80" Building manual
ombardier CL-45 Wing span :80" uilding manual 04-08 ombardier CL-45 (80") Hardware listing #CL45-80-HD N4 lind nut Ø/4 NC ( req.) N6 lind nut 6-3 (3 req.) DU -56 Threaded coupler (5 req.) DU600-56 Kwick
A. General: Refer to paragraph entitled "SUBMITTAL" in Section Include the following data:
SECTION 15860 - FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
EVALUATION SUBJECT: EPA WATERSENSE PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING
ICC-E Report PMG-1410 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION UBJECT: EPA WATERENE PLUMBING UPPLY FITTING DIVIION: 22 00 00 PLUMBING ECTION: 22 09 00 INTRUMENTATION AND CONTROL
GRUNDFOS STAINLESS STEEL PUMPS PDF
12 February, 2018 GRUNDFOS STAINLESS STEEL PUMPS PDF Document Filetype: PDF 220.01 KB 0 GRUNDFOS STAINLESS STEEL PUMPS PDF Check the Grundfos UP15-10SU7P TLC Comfort System Circulator Pump, 1/25 HP, Stainless
EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR
ICC-ES Report PMG-1368 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR DIVISION: 22 00 00 PLUMBING SECTION:
Abu Dhabi Conformity Assessment Scheme for Fire Pumps
Abu Dhabi Conformity Assessment Scheme for Fire Pumps Assessment and Surveillance Plan Page i TABLE OF CONTENTS DEFINITIONS... 1 1 ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL... 2 2 FOREWORD...
Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 22 63 13 GAS PIPING FOR LABORATORY AND HEALTHCARE FACILITIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
cygnet stainless Product Catalog toll free
cygnet stainless toll free 833-231-0344 sales@cygnetstainless.com www.cygnetstainless.com p e w Product Catalog 62 Communications Drive Waynesville, NC 28786 02 Our Products With years of industry experience,
SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and Pipe Fittings. B. Air compressor. C. Air receiver and accessories. D. Aftercooler. E. Refrigerated air dryer. F. Pressure reducing station. 1.02 RELATED
O.D / 2" (444) 15 1 / 2 " (393) Maximum I.D / 4 " (336) 1 3 / 4 " (45) 1 1 / 4 " (32)
standard basin 100 Specifications 1.1.3 Standard Round Basin with Overflow Item No. 100 For Undercounter Mount Installation Recommended openings for Under Counter mounting: Min. Diameter: 13 1 / 4 (337).
CHAPTER 10 TRAPS AND INTERCEPTORS
CHAPTER 10 TRAPS AND INTERCEPTORS 1001.0 Traps Required. 1001.1 Each plumbing fixture, excepting those having integral traps or as permitted in Section 1001.2, shall be separately trapped by an approved
Descriptive Report and Test Results
Descriptive Report and Test Results MASTER CONTRACT: 211066 Edition 1: Edition 2: November 4, 2013; Project 2661531 Montréal Issued by Viorel Popovici Eng., Review by: Gabriel Raymond B. En. January 20,
EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HYDRONIC PIPING.
ICC-ES Report Reissued 08/2016 This report is subject to renewal 08/2017 EVALUATION SUBJECT: UNIPIPE PEX-AL-PEX DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: 23 21 13 HYDRONIC
EVALUATION SUBJECT: GILES RECIRCULATING (VENTLESS) HOODS
ICC-ES Report PMG-1004 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: GILES RECIRCULATING (VENTLESS) HOODS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC)
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. U.S.A. WARNING FOR YOUR
1.6 GALLON ONE PIECE TOILET
1.6 GALLON ONE PIECE TOILET INSTALLATION INSTRUCTIONS Installer: Leave this manual for homeowner. Homeowner: Read this manual and keep for future reference. Save These Instructions for Future Use. Owner's
INSTALLATION INSTRUCTIONS
2008 Lennox Industries Inc. Dallas, Texas, USA INSTALLATION INSTRUCTIONS CH33 Series Units EVAPORATOR COILS 505,264M (65484504) 05/08 Supersedes 10/07 Litho U.S.A. RETAIN THESE INSTRUCTIONS FOR FUTURE
Internal Use Only INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR ELECTRICAL OR HIGH-DENSITY MAGNETIC ANTI-SCALE OR WATER CONDITIONING APPLIANCE IGC 91-2009 1. PURPOSE 1.1 The purpose
FL-2H, FL-2L Frequency Lavatory System FL-Series
& TAS Compliant (lower or "concave" stations only) Patented Molded One-Piece Design with Integral Bowls Constructed of Terreon or Terreon RE Solid Surface Material Access Panel and Transition Cover Enclosure
+91-8048572794 Manish International http://www.manishintl.com/ Manish International was started in 1986 with a vision to produce premium quality builder hardware & fittings. It is now a reputed manufacturer-exporter
1:80. Design Ideas CROWN PM8535 FR8923 FR ~
WR 1:80 Victorian Design Ideas Exceptional design features make this Victorian space cozy and inviting. Urns and swags accentuate the window casing, while ornate acanthus mouldings gracefully enhance the
How 1 is your resistance. wire sized? What grade of magnesium oxide is being used? How 3 is your cold pin attached to your resistance wire?
PDS QUALITY On first impression, various manufacturers of screw plug immersion heaters appear to be all alike; but when you take a closer look at screw plug immersion heaters, it becomes evident that considerable
DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61518 First edition 2000-11 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) Dimensions des
FREEDOM RESIDENTIAL CONCEALED HORIZONTAL SIDEWALL SPRINKLER VK480 TECHNICAL DATA
Page 1 of 6 1. DESCRIPTION Viking Freedom Residential Concealed Horizontal Sidewall Sprinkler VK480 is a small high-sensitivity solder link and lever residential sprinkler designed for installation on
SECTION WET PIPE FIRE PROTECTION SPRINKLER SYSTEM
SECTION 213100 WET PIPE FIRE PROTECTION SPRINKLER SYSTEM PART 1 - GENERAL 1.01 GENERAL REQUIREMENTS A. The requirements of the General Conditions and Supplementary Conditions apply to all work herein.
Lasco # Description Picture Lasco # Description Picture
TOILET REPAIR 02-1755 2 Pack, White Toilet Seat Hinge 663353 Washer, 02-3133 664625 3-1/16 O.D. x 2-1/8 I.D. x 3/16, Close Coupled Sponge Gasket, Toilet Tank To Bowl Gasket, Sponge Rubber Tank To Bowl
Schubert Nursery Holiday 2014
Schubert Nursery Holiday 4 About Schubert Nursery... Another successful year is coming to a close and as we approach the festive holiday season we are once again proud to show off our beautiful and stylish
Images from. The Decoration, Carving, and Inscriptions section
Images from The Decoration, Carving, and Inscriptions section of The Manual of Monumental Lettering, Published by Monumental News, early 1900s, pp. 37-78 available on Stone Quarries and Beyond at http://quarriesandbeyond.org/cemeteries_and_monumental_art/pdf/manual_of_monumental_letteringpub_by_monumental_news_chicago-1920s.pdf
Read these instructions carefully and completely. NOTE This appliance must be properly grounded.
Built-In Wall Oven Installation Instructions 24 (61 cm) model SEW24SS If you are in need of service, please either fill out a service request on our website, http://www.summitappliance.com/support, or
SWITCHING SWITCHING. Overhead Electric Distribution Standards INTRODUCTION
INTRODUCTION 1. All group-operated switches installed shall be load-break. The interrupters are now included with the plates and no longer need to be itemized as in the past. The identification plates
Installation Instructions
Installation Instructions Type B Gas Vent Model E/R 3" 8" ECCO TYPE B GAS VENT AND ACCESSORIES ARE FOR USE ONLY WITH LISTED CATEGORY 1 GAS-FIRED APPLIANCES OR APPLIANCES LISTED FOR USE WITH TYPE B GAS
FREEDOM RESIDENTIAL CONCEALED PENDENT SPRINKLER VK498 (K5.8) TECHNICAL DATA
Page 1 of 5 1. DESCRIPTION Viking Freedom Residential Concealed Pendent VK498 is a small thermosensitive, glass-bulb residential sprinkler designed for installation on concealed pipe systems where the
Retro Flip Alarm Clock MODEL: CH1200/1/2
Retro Flip Alarm Clock MODEL: CH1200/1/2 COMPONENT IDENTIFICATION 3 ON OFF 2 1 5 4 Push Here to Open 1. TIME SETTING KNOB 2. ALARM SETTING KNOB 3. ALARM BUTTON 4. BATTERY COMPARTMENT COVER 5. STAND POWER
ILLUSTRATED PARTS LIST ENDURO VALVE
ILLUSTRATED PARTS LIST ENDURO 175 8 VALVE Publication Number: 620917901IPL Revision Date: October 10, 2011 Revision: G Visit the IMI Cornelius web site at www.cornelius.com for all your Literature needs.
FREEDOM RESIDENTIAL CONCEALED PENDENT SPRINKLER VK494 (K4.9) TECHNICAL DATA
Page 1 of 5 1. DESCRIPTION Viking Freedom Residential Concealed Pendent VK494 is a small thermosensitive, glass-bulb residential sprinkler designed for installation on concealed pipe systems where the
Read Only Document Not For Distribution
Chapter 5 Traps, Cleanouts and Backwater Valves 5.1 SEPARATE TRAPS FOR EACH FIXTURE a. Plumbing fixtures shall be separately trapped by a water seal trap placed as close as possible to the fixture outlet.
PartsGuru.com. Exploded View Standard and Whipper Models (D15, D25, D35, & WD) Services Unlimited Inc./Parts Guru
Exploded View Standard and Whipper Models (D15, D25, D35, & WD) Scroll down to find corresponding part numbers for diagram position number. Crathco juice dispensers are the World's best for long and reliable
Engineering Specifications
BRONZE BALL VALVES Model 2970 and Model 2970.10 PART 1: GENERAL 1.1 SUMMARY A. General duty press end type bronze ball valve 1.2 DEFINITIONS A. The following are standard abbreviations for valves: 1. WOG:
TYPE LF/LC/LCV END SUCTION PUMPS
PACO LF/LC/LCV TYPE LF/LC/LCV END SUCTION PUMPS Close Coupled and Frame Mounted END SUCTION PUMPS Type LF (Frame Mounted) Type LC (Close Coupled) Type LCV (Vertically Mounted Close Coupled) Grundfos CBS
Introduction. There is no obligation to follow the methods or comply with the standards set out in this Technical Booklet.
Introduction This Technical Booklet has been prepared by the Department of the Environment for Northern Ireland and provides for certain methods and standards of building which, if followed, will satisfy
Subject: BSR Uniform Mechanical Code, 2015 Edition: Appeal on Proposal #333
Paul Cabot Administrator National Fuel Gas Ms. Gabriella Davis Recording Secretary, IAPMO Standards Council International Association of Plumbing and Mechanical Officials (IAPMO) IAPMO Group World Headquarters
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
Concepts Serving Systems
Concepts Serving Systems Installation Manual Please read this manual completely before attempting to install or operate this equipment! Notify carrier of damage! Inspect all components immediately. February
TECHNICAL DATA. Viking Technical Data may be found on Maximum Working Pressure: 175 psi (12 Bar).
Page 1 of 6 1. DESCRIPTION Viking Mirage Quick Response Extended Coverage Concealed Pendent Sprinkler VK632 and VK634 are thermosensitive glass-bulb spray sprinkler designed for installation on concealed
POROUS CONVEYOR LINE PRINTER INDEXING ASSEMBLY POROUS CONVEYOR LINE PRINTER INDEXING ASSEMBLY PARTS LIST INDEX ASSEMBLY BLOCK A
STENCILING & MARKING May, 00 SYSTEMS Parts List UNIVERSAL POROUS CONVEYOR LINE PRINTERS CLP-00, CLP-00, CLP-00 & CLP-00 SERIES POROUS CONVEYOR LINE PRINTER INDEXING ASSEMBLY 0 POROUS CONVEYOR LINE PRINTER
Model AV Alarm Valve With and Without Model RC-1 Retard Chamber European Conformity Valve Trim General Description
Worldwide Contacts www.tyco-fire.com Model AV--00 Alarm Valve With and Without Model RC- Retard Chamber European Conformity Valve Trim General Description The TYCO Model AV--00 Alarm Valves DN, DN0, DN0,
Quick response concealed horizontal sidewall sprinkler VK481
February 3, 2012 Sprinkler 63h 1. DESCRIPTION Viking Quick Response Concealed Horizontal Sidewall Sprinkler VK481 is a small solder link and lever spray sprinkler designed for installation on concealed
Prices are not to show any tax. H.S.T. is to be shown separate on your invoices. All items are to be priced F.O.B. Halifax.
METROPOLITAN REGIONAL HOUSING AUTHORITY RFQ: 17-207 Supply of Miscellaneous Plumbing Materials Telephone 902.420.2108 Please quote on the following items and estimated quantities we may be requiring for
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60228 Third edition 2004-11 s of insulated cables IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,
Page 1 of 7. Replaces Form No. F_ Rev 16.3 (Added 16X22 and 18X20 coverage areas)
Page 1 of 7 1. DESCRIPTION Viking Freedom Residential Concealed Horizontal Sidewall Sprinkler VK490 is a small high-sensitivity solder link and lever residential sprinkler designed for installation on
CableReady
CableReady www.ppc-online.com 1 PPC - A Belden Brand is a manufacturing company serving the security, cable TV, home entertainment, commercial and broadcast industries. PPC Belden is recognized worldwide