McQuay. Self-Contained Variable and Constant Air Volume. SWP Vintage G. Replacement Parts List No Revision C 09/2018

Transcription

1 Replacement Parts List No Revision C 09/208 McQuay Self-Contained Variable and Constant Air Volume SWP Vintage G This RPL is primarily intended for use with General Order (GO) numbers ( ) AND ( ). When selecting parts for units with other GO numbers, confirm the part number(s) required with Daikin Applied before ordering. To find your Daikin Applied parts distributor, call or visit

2 Table of Contents Parts List Revision History... 3 Model & Serial Number Nomenclature... 4 Unit Model Number Complete... 5, 6 Electrical Legend... 7, 8 Unit Layout Diagram... 9 Controls Control Box Diagram... 0 Control Box Component Label Diagram... Common Control Components... 2, 3 Compressor Contactors and Manual Motor Protectors... 4 Fan Motor Contactor and Motor Protector Configuration Diagrams... 5, 6 Fan Motor Components Disconnect Switches Refrigeration & Water Components Refrigeration Circuit Layout Diagrams & Components... 2 Condensers & Condenser Components Water Valve & Actuator Compressors Fan Motors & Inverters Fan Section Fan Assembly Diagrams Wheels & Shafts Bearings Fan Drives Drive Packages... 29, 30 Seismic Spring Vibration Isolators... 3 Hot Water Heating Coils, Waterside Economizer Coils, & Evaporator Coils Hot Water Heating Coils Waterside Economizer Coils Evaporator Coils Cabinet Door Components This RPL is primarily intended for use with General Order (GO) numbers ( ) AND ( ). When selecting parts for units with other GO numbers, confirm the part number(s) required with Daikin Applied before ordering. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 2

3 Parts List Revision History Revision Date Description NEW 05/ New. A 2/ Page 2: Changed SPS, 2 p/n " " to " " & SPS3 p/n " " to " ". Added footnote #3. B 0/8 Cover, Pg. 2, : Rewrote GO Note. Page 4-6: Misc. updates. Page 7, 8: Reformatted the Electrical Legend table. Page 0: Rewrote footnote #. Updated the dwg. Page 2: Misc. updates/corrections. Page 3: Added schematic symbol "S2" p/n & description to table. Page 4: Updated/corrected table. Deleted footnotes 2-4. Page 7-9: Misc. updates/corrections. Rewrote/deleted footnotes. Added 50HP info from Old pg. 20. Page 20: Deleted pg. Moved 50HP info to pg. 9. Repaginated the form & updated the TOC. Page 22 (OLD) 2 (NEW): Rewrote footnote #. Page 23 (OLD) 22 (NEW): Added /2 & Later p/n for Ref # 7. Rewrote/added footnotes. Page 25 (OLD) 24 (NEW): Added Cmpr. Avail. chart. Updated Cmpr. p/ns. Rewrote footnote #. Page 26 (OLD) 25 (NEW): Added Drive Codes to Fan Mtr. table. Updated VFD p/ns. Rewrote footnotes. Page 28, 29 (OLD) 27, 28 (NEW): Deleted footnote #. Page 30 (OLD) 29 (NEW): Rewrote notes for "Fan Drives" & "Drive Packages". C 09/8 Page 20: Updated table. Added dwgs.& footnote. Daikin Applied, 3600 Industrial Park Blvd., P.O. Box 55, Minneapolis, MN (763) Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 3

4 Model & Serial Number Nomenclature SWP 023 G Unit Type: SWP = Self-Contained, Water Cooled, Plenum Discharge Vintage Unit Size (Nominal Tons): 08 = 8 Ton 023 = 23 Ton 035 = 35 Ton 040 = 40 Ton 045 = 45 Ton 055 = 55 Ton 065 = 65 Ton 070 = 70 Ton 080 = 80 Ton 05 = 05 Ton 20 = 20 Ton Serial Number Nomenclature FBO U Plant Identification FBO = Faribault, MN Sequence Number U = Unit Year of Manufacture 0 = 200 = 20 2 = 202 Month of Manufacture 0 = January 08 = August 02 = February 09 = September 03 = March 0 = October 04 = April = November 05 = May 2 = December 06 = June 07 = July This RPL is primarily intended for use with General Order (GO) numbers ( ) AND ( ). When selecting parts for units with other GO numbers, confirm the part number(s) required with Daikin Applied before ordering. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 4

5 SWP***G Unit Model Number Complete 27 AL L BEP YY Y RP S Y 3 6A 0606YYYYYYYY Y 2B HS Code S YY AFFSY YY TY L S YY YY YY WY LH Y YY A 2 A A Unit Voltage 27= 460/60/3 04 Starting Option AL= Across the Line Start 05 Field Power Connection L= Single Point, Lockable Disconnect (Thru Door) 06 Controls Package Digit L= Lon Mark B= BACNet with MSTP E= BACNet with IP S= Standalone Digit 2 E= Discharge Air Control F= Space Comfort Control Digit 3 P= Purchased Control Panel 07 Special Software YY= No Requirement = 00% Outside Air XX= Special 08 Optional MicroTech Hardware Y= No Requirement A= Power Loss Package (Spring Return Actuators) X= Special 09 Alternate Refrigerants RP= R40A and POE Oil XX= Special 0 Quantity of Refrigeration Circuits S= Independent Circuit for each Compressor Refrigerant Specialties Y= No Requirement P= Power Factor Capacitors (5HP cmprs. only) 2 Inverter Y= No Requirement 3= ABB With Bypass S= Schneider w/o Bypass X= Special 3 Cooling Coil Selection 6A= 6 Row 2 FPI AL Fin, Galv. Casing 6B= 6 Row 2 FPI AL Fin, SSTL Casing 6S= 6 Row 2 FPI AL Fin, SSTL Casing XX= Special 4 Compressor Selections Digit -2, 3-4, 5-6, = 9HP Compressor 0= 0HP Compressor 2= 2HP Compressor 5= 5HP Compressor YY= No Requirement XX= Special Digit 9-0, -2 2= 2HP Compressor 5= 5HP Compressor 24= (2) 2HP Compressors 30= (2) 5HP Compressors YY= No Requirement XX= Special 5 Filters R= 2" 30% Pleated X= Special 6 Fan Selection Digit -2 2= 2" Fan 5= 5" Fan 8= 8" Fan 20= 20" Fan 22= 22" Fan 25= 25" Fan 27= 27" Fan 30= 30" Fan 33= 33" Fan 37= 37" Fan 40= 40" Fan Digit 3 = Single Fan Digit 4 B= Air Foil Fan with Single Width Plenum 7 Fan Motor Selection H*= 3HP; J*= 5HP; K*= 7.5HP; L*= 0HP; M*= 5HP; N*= 20HP; P*= 25HP; Q*= 30HP; R*= 40HP; S*= 50HP *S= Premium Efficiency ODP Motor 8 Fan Motor Drive Selection ****S= (****)= Fan RPM/ S= Std. Fixed Drive ****F= (****)= Fan RPM/ F= 50% Fixed Drive 9 UV Lights YY= No Requirement An "X" located in ANY position in a code string (ESPECIALLY Code 33) indicates the presence of special feature(s). It is important to note that special features may change unit components in unexpected areas so it is recommended to contact Daikin Applied with model and serial number information in order to correctly identify the required part(s). Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 5

6 Unit Model Number Complete, Continued 20 Auxiliary Controls Digit Y= No Requirement F= Freezestat P= Phase Failure A= Freezestat and Phase Failure Digit 2 Y= No Requirement F= Water Flow Switch Digit 3 Y= No Requirement F= Dirty Filter Switch Digit 4 Y= No Requirement S= S2 Fan Door Cut Out Switch Digit 5 Y= No Requirement F= FS Fan Relay 2 No Requirement, not an SWP Code YY= No Requirement 22 Air Discharge Arrangement YY= No Requirement TY= Top Discharge with No Plenum XX= Special 23 Piping Connection Location (Unit Hand) L= Left Hand R= Right Hand X= Special 24 Condensers S= Cleanable Tube (Low Temp Condensing) G= Cleanable Tube (High Temp Condensing) X= Special Way Condenser Water Valve YY= No Requirement = 2-Way Mod. Vlv. (Full flow on shutdown) XX= Special 26 Waterside Economizer Digit Y= No Requirement = Cleanable Coil 2= Non-Cleanable Coil X= Special Digit 2 Y= No Requirement = Std. Valve Control (No Flow on Shutdown) 2= Opt. Valve Control (Full Flow on Shutdown) X= Special 27 Airside Economizer Mixing Box YY= No Requirement XX= Special 28 Heat Selection YYY= No Requirement (Cooling only unit) WY= Row 2 FPI HW Coil less Valve WM= Row 2 FPI HW Coil w/ 2-Way Modulating Control Valve XXX= Special 29 Cabinet Lining Digit L= Solid Liners (2".5# insulation) P= Perf-Liners (2" 3# insulation) X= Special Digit 2 S= Standard Gauge Steel Panels H= Heavy Gauge Steel Panels X= Special 30 Fan Isolation = Seismic Restraints with 2" Deflection Spring X= Special 3 Service Valves and Roto Locks = Dual Filter Drier Service Valves with Compressor Roto-Locks 32 Modular Construction Y= No Requirement X= Special 33 Miscellaneous YY= No Requirement XX= Special 34 Approval Listing Y= No Requirement A= ETL/CETL/ASHRAE 90. X= Special 35 Packaging 2= Shrink Wrap X= Special 36 Parts Warranty A= Standard One Year C= Two Years Total D= Three Years Total E= Four Years Total F= Five Years Total Z= Special 37 Compressor Warranty A= Standard One Year Q= Five Years Total X= Special Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 6

7 Electrical Legend Designation Description Standard Location 2 ACT3 ACTUATOR MOTOR- ECONOMIZER COMPR./COND. SECTION ACT4 ACTUATOR MOTOR- WATER REGULATING/BYPASS VALVE COMPR./COND. SECTION C- 8 POWER FACTOR CAPACITORS- COMPRESSOR CONDENSER SECTION C0 POWER FACTOR CAPACITORS- SUPPLY FAN SUPPLY FAN SECTION CB0 CIRCUIT BREAKER- SUPPLY FAN MAIN CONTROL BOX DAT SENSOR- DISCHARGE AIR TEMPERATURE DISCHARGE SECTION DHL DUCT HIGH LIMIT MAIN CONTROL BOX DS DISCONNECT- TOTAL UNIT OR COND./HEAT MAIN CONTROL BOX DS2 DISCONNECT- SUPPLY FAN/CONTROLS MAIN CONTROL BOX EXP A, B, C MICROTECH III EXPANSION MODULES MAIN CONTROL BOX EWT SENSOR- ENTERING WATER TEMPERATURE COMPR./COND. SECTION FA, FIB FUSES- CONTROL CIRCUIT TRANSFORMER T, PRIMARY MAIN CONTROL BOX FC FUSE- CONTROL CIRCUIT TRANSFORMER T, SECONDARY MAIN CONTROL BOX F5 FUSE- UV LIGHTS MAIN CONTROL BOX FB3-34 FUSEBLOCKS- ELECTRIC HEAT MAIN CONTROL BOX FP- 8 FROST PROTECTION- REFRIGERATION CIRCUITS CONDENSER SECTION FS, FS2 CONTROLS- FREEZESTAT COIL SECTION GFR, 2 RELAYS- GROUND FAULT MAIN CONTROL BOX GFS, 2 SENSORS- GROUND FAULT MAIN CONTROL BOX GRD GROUND MAIN CONTROL BOX HL3-34 HIGH LIMITS, CONTROL- ELECTRIC HEATERS HEAT SECTION, ELECTRIC HP-8 CONTROLS, HIGH PRESSURE- REFRIGERANT ON COMPRESSORS HS3 SWITCH, HEAT- ELECTRIC HEAT DOOR INTERLOCK HEAT SECTION, ELECTRIC HTR- 8 CRANKCASE HEATERS ON COMPRESSORS LP-8 CONTROLS, LOW PRESSURE- REFRIGERANT ON COMPRESSORS LR0 LINE REACTOR- SUPPLY FAN MAIN CONTROL BOX M- M8 CONTACTORS- COMPRESSORS MAIN CONTROL BOX M9 CONTACTOR- SUPPLY FAN, DUAL CONTACTOR START MAIN CONTROL BOX M0 CONTACTOR- SUPPLY FAN MAIN CONTROL BOX M30B CONTACTOR- REVERSING, BYPASS SUPPLY FAN MAIN CONTROL BOX M30I CONTACTOR- REVERSING, INVERTER SUPPLY FAN MAIN CONTROL BOX M3- M34 CONTACTORS- ELECTRIC HEAT MAIN CONTROL BOX MAT SENSOR- MIXED AIR TEMPERATURE FILTER SECTION MCB MICROTECH III CONTROL BOARD MAIN CONTROL BOX MF, 2 MUFFIN FANS MAIN CONTROL BOX MJ MECHANICAL JUMPER MAIN CONTROL BOX MMP- 8 MANUAL MOTOR PROTECTORS- COMPRESSORS MAIN CONTROL BOX MMP9 MOTOR PROTECTOR- SUPPLY FAN, DUAL CONTACTOR START MAIN CONTROL BOX MMP0 MANUAL MOTOR PROTECTOR- SUPPLY FAN MAIN CONTROL BOX MMP30 MANUAL MOTOR PROTECTOR- INVERTER BYPASS, SUPPLY FAN MAIN CONTROL BOX MP- 8 MOTOR PROTECTORS- COMPRESSORS ON COMPRESSORS OAE SENSOR- OUTSIDE AIR ENTHALPY FIELD INSTALLED OAT SENSOR- OUTSIDE AIR TEMPERATURE FIELD INSTALLED PB POWER BLOCK- TOTAL UNIT OR COMPR./ ELECTRIC HEAT MAIN CONTROL BOX PB2 POWER BLOCK- SUPPLY FAN/CONTROLS MAIN CONTROL BOX PB0 POWER BLOCK- FIELD INSTALLED VFD MAIN CONTROL BOX PC5 CONTROL- PRESSURE, CLOGGED FILTER MAIN CONTROL BOX PC7 CONTROL- PRESSURE/INDUCTIVE RELAY, PROOF OF AIRFLOW MAIN CONTROL BOX PSR, 2 TRANSDUCERS- HEAD PRESSURE CONTROL CONDENSER SECTION PVM, 2 PHASE VOLTAGE MONITORS MAIN CONTROL BOX R3-8 RELAYS- HIGH PRESSURE MAIN/COND. CONTROL BOX R45 RELAY- UV LIGHTS MAIN CONTROL BOX R63 RELAY- DUCT HIGH LIMIT MAIN CONTROL BOX RAT SENSOR- RETURN AIR TEMPERATURE FIELD INSTALLED REC0 RECEPTACLE CABINET SECTIONS RES, 2 RESISTORS- LOW PRESSURE SWITCH MAIN CONTROL BOX RES3 RESISTOR- FREEZESTAT MAIN CONTROL BOX RES4 RESISTOR- ENTHALPY MAIN CONTROL BOX Schematic designators may vary depending on unit size, voltage, and options selected. Refer to the unit schematic for more information. 2 Component locations listed are typical and should be used for reference only. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 7

8 Electrical Legend, Continued Designation Description Standard Location 2 S SWITCH- INVERTER/OFF/BYPASS MAIN CONTROL BOX S4 SWITCH- CONTROLS/ON/AUTO MAIN CONTROL BOX S7 SWITCH- INVERTER/OFF/BYPASS MAIN CONTROL BOX S0 SWITCH- CABINET SECTIONS CABINET SECTIONS S2 SWITCH- FAN DOOR INTERLOCK FAN SECTION S40-45 SWITCHES- UV LIGHTS DOOR INTERLOCK CABINET SECTIONS SD SMOKE DETECTOR- SUPPLY FAN DISCHARGE SECTION SHS SENSOR- SPACE HUMIDITY FIELD INSTALLED SPS, 2 SENSORS- STATIC PRESSURE DUCT/BUILDING MAIN CONTROL BOX SV, SV2 SOLENOID VALVES- LIQUID CONDENSER SECTION SV5, SV6 SOLENOID VALVES- HOT GAS BYPASS COIL SECTION T TRANSFORMER- MAIN CONTROL/UV LIGHTS (LINE/5VAC) MAIN CONTROL BOX T2 TRANSFORMER- CONTROL INPUT (5/24VAC) MAIN CONTROL BOX T3 TRANSFORMER- CONTROL OUTPUT (5/24VAC) MAIN CONTROL BOX T4 TRANSFORMER, EXHAUST DAMPER ACTUATOR (5/2VDC) MAIN CONTROL BOX TB TERMINAL BLOCK- INTERNAL MAIN CONTROL BOX TB2 TERMINAL BLOCK- FIELD, CLASS 2 MAIN CONTROL BOX TB3 TERMINAL BLOCK- FACTORY MAIN CONTROL BOX TB4 TERMINAL BLOCK- FIELD (5VAC) MAIN CONTROL BOX UV ULTRA-VIOLET LIGHT(S) COIL/DISCHARGE SECTION VFD0 VARIABLE FREQUENCY DRIVE (VFD)- SUPPLY FAN MAIN CONTROL BOX VM VALVE MOTOR- #- HEATING FIELD PROVIDED/INSTALLED VM5 VALVE MOTOR- #5- COOLING COIL SECTION, COOL WFS SENSOR- WATER FLOW CONDENSER SECTION ZNT SENSOR- ZONE TEMP, SETBACK FIELD INSTALLED Schematic designators may vary depending on unit size, voltage, and options selected. Refer to the unit schematic for more information. 2 Component locations listed are typical and should be used for reference only. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 8

9 Unit Layout Diagrams Top View Return Air Opening Condensate Drain Control Panel Access Coil Access Control Panel Final Filters Power Entry Motor/Fan Access Supply Fan Motor Return Plenum/Prefilters Supply Fan Post Filter Rack Waterside Economizer Coil Evaporator Coil Top Supply Air Opening Side View Water Supply Water Return Return Air Opening Supply Fan Compressor/Condenser Compressor/Condenser Access Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 9

10 Controls Control Box Diagram Diagram is representative of a typical Control Box. Components, component layout, and component quantity may vary depending upon unit size and options selected. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 0

11 Controls Control Box Component Label Diagram Note that starting in late 200 all units will have a label similar to the one shown above pasted to the inside of the Control Box door. This label contains schematic designators, part descriptions, and Daikin Applied part numbers. The label shown above is for representative purposes only. Actual part numbers will vary depending upon unit options and features. This RPL is primarily intended for use with General Order (GO) numbers ( ) AND ( ). When selecting parts for units with other GO numbers, confirm the part number(s) required with Daikin Applied before ordering. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page

12 Controls Common Control Components Sch. Sym. Description Part Number MCB Main Control Board Battery- MCB EXP A, B, C Expansion Modules Connector Set for Extension 2 Spring Cage Top Entry Connector, Extension I/O Direct Connect Connector, 2-Pin Spring Cage, Top Entry Connector, 3-Pin Spring Cage, Top Entry Connector, 4-Pin Spring Cage, Top Entry Connector, 5-Pin Spring Cage, Top Entry Connector, 6-Pin Spring Cage, Top Entry Connector, 7-Pin Spring Cage, Top Entry Connector, 8-Pin Spring Cage, Top Entry Filter Pressure Gauge 0-3 IWC FA, B Fuses- T Control Transformer Primary, 6A FC Fuse- T Control Transformer Secondary, 2A FS, 2 Freezestats HP- 8 Switches- High Pressure, Refrigerant 3470 LP- 8 Switches- Low Pressure, Refrigerant 3480 HTR- 8 Crankcase Heater- Compressors MP- 8 Compressor Motor Protectors (3HP & 5HP Compressors only) SPS, 2 Duct Static Pressure Sensors 7/ & Earlier Duct Static Pressure Sensors 9/ & Later SPS3 Building Static Pressure Sensor 7/ & Earlier Building Static Pressure Sensor 9/ & Later PC5 Switch- Dirty Filter, Prefilter PC6 Switch- Dirty Filter, Final Filter PC7 Relay- Current Sensing DHL Duct High Limit DAT Discharge Air Temperature Sensor EFT Entering Fan Air Temperature Sensor RAT Return Air Sensor OAT Outside Air Temperature Sensor MAT Mixed Air Temperature Sensor EWT Entering Water Temperature Sensor OAE Enthalpy Control, Electro-Mechanical Enthalpy Control, Comparative RAE Return Air Enthalpy Sensor SD Smoke Detector- Supply Air SHS Space Humidity Sensor- Wall Mount SHS Space Humidity Sensor- Duct Mount MF Muffin Fan Fan Guard- Muffin Fan This Control Board must be programmed in order to function correctly. When ordering a replacement, provide the unit model and serial number so the unit specific software code can be loaded before shipment. 2 These parts are not provided with the Expansion Module. Order separately if needed. 3 The original Transducer is no longer available. This replacement kit requires minor field modifications for proper installation & operation. 4 For units built 8/ contact Daikin Applied to ensure that the correct part(s) are identified. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 2

13 Controls Common Control Components, Continued Sch. Sym. Description Part Number R3-8 Relay- High Pressure Relay Base R63 Relay- Duct High Limit Relay Base R78, 79 Relay- Input to MCB Relay Base R83 Relay- Smoke Shutdown Relay Base R86 Relay- Smoke Pressure Relay Base PVM, 2 Phase Voltage Monitor RES, 4 Resistor,.5K RES2, 3 Resistor,.0K S Switch- Unit On/Off S4 Switch- Inverter Bypass S7 Switch- Local On/Off to MCB S2 Switch- Fan Door Interlock T Transformer- Control, 000VA T Fuse Puller Kit T Finger Safe Cover Kit T2 Transformer, 5/24 VAC 75VA T3 Transformer, 5/24 VAC 50VA WFS Switch- Water Flow (Code 24= ) ZNT Zone Temp. Sensor w/tenant Override 3770 ZNT Zone Temp. Sensor w/tenant Override & Remote Set Pt. Adj BACnet MS/TP Communication Module (RS-485) BACnet /IP Communication Module (IP Cable 0 BaseT) LONMARK Space Comfort Controller (SCC) Communication Module LONMARK Discharge Air Controller (DAC) Communication Module Remote Keypad Interface Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 3

14 Controls Compressor Contactors and Manual Motor Protectors 2 3F 3B C Compressor HP/460V Ref. Sch. Part Part No. Sym. Description Number M- 8 Contactor, 25A Contactor, 32A C Contactor Spacer MMP- 8 Manual Motor Protector Manual Motor Protector Manual Motor Protector B Link F Auxiliary Contact /NC/NO Quantities shown are per compressor. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 4

15 Controls Fan Motor Contactor and Motor Protector Configuration Diagrams Fan Contactor Assembly Without Bypass 2 Fan Contactor Assembly With Bypass 2 3B C 3B 4A 4 The above diagrams show typical Fan Control components and component locations. Not all components are used in every assembly. For additional Contactor and Manual Motor Protector configurations, refer to the diagrams on the next page. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 5

16 Controls Fan Motor Contactor and Motor Protector Configuration Diagrams, Continued 3E 2 2 3E The above diagrams show typical Fan Control components and component locations. Not all components are used in every assembly. Note that M0 contactors (Ref. #) are shown above. M30 Bypass contactors (Ref. #4) are located in the same position as M0. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 6

17 Controls Fan Motor Components 3 HP Motor- Code 7= HS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 9A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= JS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 9A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= KS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 2A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker One pc. is used for M0 Contactors and two pcs. are used for M30 Contactors. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 7

18 Controls Fan Motor Components, Continued 0 HP Motor- Code 7= LS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 8A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= MS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 25A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= NS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 32A C Contactor Spacer MMP0 Manual Motor Protector B Link M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker One pc. is used for M0 Contactors and two pcs. are used for M30 Contactors. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 8

19 Controls Fan Motor Components, Continued 25 HP Motor- Code 7= PS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 40A MMP0 Manual Motor Protector M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= QS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 40A MMP0 Manual Motor Protector M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= RS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 50A MMP0 Manual Motor Protector M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker HP Motor- Code 7= SS Voltage Ref. Sch. Part Part No. Sym. Description Number 460V M0 Contactor, 80A MMP0 Manual Motor Protector M30 Bypass Contactor MMP30 Manual Motor Protector CB0 Circuit Breaker Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 9

20 Controls Disconnect Switches Sch. Sym. Part Description Switch Toggle DS, 2 Disconnect Switch 00 Amp Disconnect Switch 50 Amp Disconnect Switch 250 Amp Disconnect Switch 400 Amp This list includes the most common Disconnects offered. Due to the various unit options available, before ordering it is necessary to confirm what amperage Disconnect is installed in the unit, or if this is not known, contact Daikin Applied with unit tag number (if available) plus model and serial number information to ensure that the correct Disconnect is identified. Padlock Toggle Disconnect Switch Padlocks NOT included Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 20

21 Refrigeration & Water Components Refrigeration Circuit Layout Diagram & Components LH Three Compressor Unit shown Thermal Expansion Valve (TEV) Liquid Line Filter Drier Condenser Stack Compressors Description Compr. HP Part Number Qty. Expansion Valve (TEV) 9, Expansion Valve (TEV) Expansion Valve (TEV) Liquid Line Service Valve ALL Liquid Line Sight Glass ALL Liquid Line Filter Drier ALL 3490 Suction Service Valve ALL Discharge Service Valve LH Unit (Code 23= L) ALL RH Unit (Code 23= R) ALL Quantity varies. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 2

22 Refrigeration & Water Components Condensers & Condenser Components Condensers Compressor HP Description Part Number 2 09 Condenser, Shell & Tube Condenser, Shell & Tube Condenser, Shell & Tube Condenser, Shell & Tube 3504 Condenser Components Ref. Unit Part Quantity Per No. Size Description No. Condenser ALL Pressure Relief Valve ALL Seal, Rotolock ALL Seal, Rotolock ALL Head Gasket ALL Head Gasket Bolts ALL Clamp, Victaulic Fitting (/ & Earlier) ALL Clamp, Victaulic Fitting (/2 &Later) The above diagrams show typical component locations. The number and layout of components will vary depending upon unit size and the number of refrigeration circuits. 2 Because multiple compressor configuration options may be available for a given size unit, before ordering it is necessary to confirm the HP of the compressor the Condenser is serving. If this is not known, contact Daikin Applied with unit tag number (if available) plus model and serial number information to ensure that the correct part(s) are identified. 3 For units built 2/ contact Daikin Applied with model and serial number information so that the correct part can be identified. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 22

23 Refrigeration & Water Components Water Valve & Actuator Ref. Unit Part Quantity No. Size Description No. 42 ALL Actuator ALL Valve, Water ALL Shaft, Actuator ALL Bearing, Actuator Shaft Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 23

24 Compressors Compressor Availability: Code 4= ****** Unit Compressor HP Size , , , These are the most common compressor combinations offered. Due to the various unit configurations available, it is necessary to confirm which compressor is installed in the unit, or if this is not known, contact Daikin Applied with model and serial number information to ensure that the correct compressor(s) are identified. Compressor Part Numbers Cmpr. Voltage Part HP Number Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 24

25 Fan Motors & Inverters Fan Motors H.P. H.P. Unit ODP Pre. Eff. Code 7= ** Voltage Code 7= *S 03 H* 460/60/ J* 460/60/ K* 460/60/ L* 460/60/ M* 460/60/ N* 460/60/ P* 460/60/ Q* 460/60/ R* 460/60/ S* 460/60/ ABB VFD: Code 2= 3 Motor Horsepower Part Number 460V 460V 460V 460V 460V 460V 460V 460V 460V 460V Note that the original VFDs are obsolete and no longer available. The above listed VFDs are the recommended replacements. The replacement keypad/display p/n is Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 25

26 Fan Section Fan Assembly Diagrams Side View Fan Wheel Bearing, Drive Side Motor (See Motor Section) Top View Fan Wheel Bearing, Opposite Drive Side Bearing, Drive Side Shaft Motor (See Motor Section) Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 26

27 Fan Section Wheels & Shafts Fan Wheels Wheel Shaft Part Description Diameter No. 20 Wheel.44 Dia Wheel.69 Dia Wheel.69 Dia Wheel.94 Dia Wheel 2.9 Dia Wheel 2.9 Dia Fan Shafts Wheel Shaft Part Description Diameter No. 20 Wheel.44 Dia Wheel.69 Dia Wheel.69 Dia Wheel.94 Dia Wheel 2.9 Dia Wheel 2.9 Dia Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 27

28 Fan Section Bearings Fan Bearings: Drive Side Wheel Bearing Part Description Description No. 20 Wheel Bearing,.438" Wheel Bearing,.688" Wheel Bearing,.688" Wheel Bearing,.938" Wheel Bearing, 2.88" Wheel Bearing, 2.88" Fan Bearings: Opposite Drive Side Wheel Bearing Part Description Description No. 20 Wheel Bearing,.438" Wheel Bearing,.688" Wheel Bearing,.688" Wheel Bearing,.938" Wheel Bearing, 2.88" Wheel Bearing, 2.88" Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 28

29 Fan Section Fan Drives & Drive Packages Fan Drives Drive components (Fan Sheave, Motor Sheave, V-belt[s], and Sheave Bushing[s]- if required) WITHOUT a specific Drive package specified (Code 8 DOES NOT = 205*, 429*, 446*, 57*, 59*) are NOT listed as they are unique to the unit. If a drive package has NOT been selected, you may use the number from the part and cross reference it in the Daikin Applied Parts catalog, The Daikin Parts E-Commerce site, or contact Daikin Applied with model and serial number information. Drive Packages If a specific Drive Package has been selected (Code 8= 205*, 429*, 446*, 57*, 59*) use the following charts. If it is not known if one of these packages has been selected, contact Daikin Applied with unit tag number (if available) plus model and serial number information to ensure that the correct part(s) are identified. Fan Assy.: " Fan, 57 RPM, 5HP Motor Part Part Qty. Description Number Wheel, Bearing, Drive Side Bearing, Fan Wheel Motor, 5HP Shaft Fan Sheave Fan Bushing Motor Sheave Motor Bushing V-Belt Fan Assy.: " Fan, 429 RPM, 5HP Motor Part Part Qty. Description Number Wheel, Bearing, Drive Side Bearing, Fan Wheel Motor, 5HP Shaft Fan Sheave Fan Bushing Motor Sheave Motor Bushing V-Belt Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 29

30 Fan Section Drive Packages, Continued Fan Assy.: " Fan, 59 RPM, 25HP Motor Part Part Qty. Description Number Wheel, Bearing, Drive Side Bearing, Fan Wheel Motor, 25HP Shaft Fan Sheave Fan Bushing Motor Sheave Motor Bushing V-Belt Fan Assy.: " Fan, 446 RPM, 30HP Motor Part Part Qty. Description Number Wheel, Bearing, Drive Side Bearing, Fan Wheel Motor, 30HP Shaft Fan Sheave Fan Bushing Motor Sheave Motor Bushing V-Belt Fan Assy.: " Fan, 205 RPM, 50HP Motor Part Part Qty. Description Number Wheel, Bearing, Drive Side Bearing, Fan Wheel Motor, 50HP Shaft Fan Sheave Fan Bushing Motor Sheave Motor Bushing V-Belt Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 30

31 Fan Section Seismic Spring Vibration Isolators Vibration Isolators- Seismic Spring Fan Sizes Part Spring(s) Part Quantity Used with Description Color 2 No " Seismic mount, 33 lb. Yellow " Seismic mount, 43 lb. Purple " Seismic mount, 59 lb. Black w/ Silver Markings " Seismic mount, 83 lb. Red w/ White Markings " Seismic mount, 20 lb. Green " Seismic mount, 55 lb. Black w/ Yellow Markings " Seismic mount, 95 lb. Gray " Seismic mount, 236 lb. Gray & Green w/ White Markings " Seismic mount, 300 lb. Gray w/ White Markings & Black " Seismic mount, 390 lb. 2 Gray " Seismic mount, 472 lb. 2 Gray w/ White Markings " Seismic mount, 600 lb. 2 Gray w/ White Markings & Black , 44 Seismic mount, 2 lb. Brown , 44 Seismic mount, 7 lb. White w/ Yellow Markings , 44 Seismic mount, 24 lb. Red , 44 Seismic mount, 348 lb. Green w/ Yellow Markings , 44 Seismic mount, 453 lb. Blue , 44 Seismic mount, 590 lb. White w/ Sliver Markings , 44 Seismic mount, 676 lb. Green & White , 44 Seismic mount, 767 lb. White w/ Sliver Markings & Silver Quantity and location of each isolator used depends upon the motor and drive package selected. Visually confirm the color and location where the required isolator is used in the assembly before ordering, or contact Daikin Applied with model and serial number information so that the correct isolator(s) can be identified. 2 Spring colors may vary dictated by vendor updates. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 3

32 Hot Water Heating Coils, Waterside Economizer Coils, & Evaporator Coils Hot Water Heating Coils Hot Water Heating Coils are serial number specific. Contact Daikin Applied with Unit GO & Item number and Unit Serial Number in order to identify the required coil. Waterside Economizer Coils Economizer Coils are serial number specific. Contact Daikin Applied with Unit GO & Item number and Unit Serial Number in order to identify the required coil. Evaporator Cooling Coils Evaporator Cooling Coils are serial number specific. Contact Daikin Applied with Unit GO & Item number and Unit Serial Number in order to identify the required coil. Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 32

33 Cabinet Door Components Cabinet Door Components Ref. Part Part No. Description No. Handle, Standard Handle, Lockable Hinge Pawl Handle nuts, bushings, washers, roller cams, etc. are furnished with the handles and are not available separately Control Box Door Components Ref. Part Part No. Description No. 5 Handle Panel Latch Assy Hinge Filter Kit Louver Self-Contained; SWP Vintage G Rev. C 09/8 RPL / Page 33