EW171 Series Woltman Bulk Water Meters DN FOR COLD AND WARM POTABLE WATER APPLICATIONS
|
|
|
- Johnathan York
- 5 years ago
- Views:
Transcription
1 EW171 Series Woltman Bulk Water Meters DN FOR COLD AND WARM POTABLE WATER APPLICATIONS CONTENTS PRODUCT DATA EW171, DN50 Contents... 1 General... 2 Application... 2 Features... 2 Design... 2 Materials... 2 Approvals... 2 Technical Details... 3 Specifications... 3 Flow Data... 3 Sizing... 3 Function... 3 Counter... 4 Flow Sensor... 4 Installation... 4 Remote Readout... 4 Identification... 4 Counter... 4 Flow Sensor... 4 Front Panel Contents... 4 Dimensions... 5 Ordering Details... 6 Ordering Information... 6 Scope of Delivery... 6 Accessories... 6 Diagrams... 7 Accuracy... 7 Flow Diagram... 7 EW171, DN400 Honeywell All rights reserved 1 EN0H-0458GE25 R1014
2 GENERAL Application Honeywell EW171 Series Woltman water meters are used for volume measurement of cold or warm water in potable water networks. They are available for cold water up to 30 C (EW1710) or for warm water up to 130 C (EW1711). They have a mechanical counter with rollers and dials and can be equipped with clip-on modules for remote readout applications. Clip-on modules are available for wired M-Bus, pulse out and RF (OMS, 848MHz). The clip-on modules are retrofittable. Features Suitable for horizontal and vertical installation Low pressure loss Rugged design for longterm accuracy Retrofittable clip-on modules for remote readout Design EW171 Series water meters consist of: Mechanical counter Woltman WP type mechanical flow sensor Housing with flanges to PN16 Optional clip-on module for remote readout Materials Counter housing and lid made of dark plastic Flow sensor housing made of cast iron, painted blue (cold water version) or red (warm water version) Approvals EW171 Series bulk water meters have MID approval under approval number SK08-MI001-SMU002 (for cold water) and SK10-MI001-SMU013 (for warm water). Fig. 1. EW171 Series main components Table 1. EW171 Series main components Number Component 1 Counter lid 2 Roller counter 3 Decimal place dials 4 Counter housing 5 Inlet 6 Flow sensor housing 7 Outlet EN0H-0458GE25 R Honeywell All rights reserved
3 TECHNICAL DETAILS Specifications Sizes Medium Temperature class Medium temperature Ambient temperature Water pressure class Op. pressure range Pressure loss class Protection class Environmental class Mechanical class DN Q3 40 1,600 (EW1710) Q3 25 1,000 (EW1711) Potable water EW1710: T30, T50 EW1711: T130 EW1710: C EW1711: C 5 55 C MAP16 (max. 16bar) bar P16 (max. 16kPa) IP66 B M1 Electromagnetic class Measuring process E1 Mechanical counter with Woltman WP type flow measurement Display Six-digit roller counter with three dials for decimal places Display unit m³ Display range DN50 125: 10 6 m³ DN : 10 7 m³ Increments DN50 125: m³ DN : 0.005m³ DN300: 0.05m³ Acceptable error ±5% (Q 1 Q Q 2) ±2% (Q 2 Q Q 4 for 0.1 T 30 C ±3% (Q 2 Q Q 4 for T>30 C Installation position H, V (horizontal, vertical) Flow Data Table 2. Flow rates EW1710, for cold water applications DN size Flow rates according to MID Minimum (Q 1 ) m³/h Transition (Q 2 ) m³/h Permanent (Q 3 ) m³/h ,000 1,600 Overload (Q 4 ) m³/h ,250 2,000 Dynamic range Q 3 /Q 1 R100 R125 R160 R200 R160 R200 R125 R100 R100 Additional flow data Starting flow m³/h Table 3. Flow rates EW1711, for warm water applications DN size Flow rates according to MID Minimum (Q 1 ) m³/h Transition (Q 2 ) m³/h Permanent (Q 3 ) m³/h ,000 Overload (Q 4 ) m³/h ,250 Dynamic range Q 3 /Q 1 R40 R40 R40 R40 R40 R40 R40 R25 R25 Additional flow data Starting flow m³/h Sizing EW171 Series water meters must be selected in such a way that typical system flow rates are between transition (Q 2 ) and permanent flow rate (Q 3 ) The flow rate may not drop below minimum (Q 1 ) or exceed overload flow rate (Q 4 ) at any time Honeywell All rights reserved 3 EN0H-0458GE25 R1014
4 Function Counter The counter contains a five-digit roller counter for values of whole m³ and dials for tenth, hundredth and thousandth parts of m³. It is flanged to the flow sensor housing. Displayed value is cumulative (total) flow through the meter. Flow Sensor The Woltman technology of the flow sensor combines high measuring accuracy with long term stability and the capability of measuring high volumes at low pressure drop. The Woltman wheel is connected to the counter by a shaft and a magnetic coupling. Installation Calming legs are not required unless bends, pumps or self-acting valves are placed before or after the meter. In such cases calming legs of straight pipe with a minimum length of 6 x DN before and 2 x DN after the meter are required All sizes may be installed in either horizontal or vertical position The meter must be installed in such a way that the counter faces up or sideways. It must not be installed in such a way that the counter faces downwards Avoid installation at highest point of system or system part as air may be trapped in meter During measurement meter must be completely filled with water Remote Readout EW171 Series water meters can be fitted with clip-on modules for remote readout applications. The clip-on modules are retrofittable and are attached by means of a standardised design which is identical for all sizes DN Mounting of the modules does not affect approval of the meter. The following modules are available: Wired M-Bus, according to EN Pulse output, open collector RF, according to OMS, 848MHz Identification Counter Six-digit roller counter with three dials for decimal places Marked with Honeywell logo, Honeywell OS-Number, approval number and key technical data according to requirements of MID Set into black plastic collar with lid Flow Sensor Flanged flow sensor housing painted blue (EW1710) or red (EW1711) with DN size and flow arrow embossed on side Front Panel Contents Fig. 2. Frontplate contents of EW1710AC5000 Table 4. EW171 Series frontpanel elements Number Element 1 Honeywell logomark 2 OS-Number 3 Roller counter 4 Unit x unit dial x unit dial x unit dial 8 Differential pressure at nominal flow 9 Maximum static pressure 10 Temperature class 11 Permanent flow Q 3 12 Dynamic range / flow profile resistance class 13 Approval number 14 CE mark EN0H-0458GE25 R Honeywell All rights reserved
5 Dimensions DN Size Length L Fig. 3. Dimensions Table 5. Dimensions EW171 Series Height H Height H1 Height h Diameter D Weight kg kg kg kg kg kg kg kg kg NOTE: All dimensions in mm unless stated otherwise Height H1 = space required for removal of measuring insert Honeywell All rights reserved 5 EN0H-0458GE25 R1014
6 ORDERING DETAILS Ordering Information Table 6. OS-Nos. (OS=Order Specification) Item DN size Permanent flow Q 3 Length OS-Number EW1710A Bulk water meters for cold water 50 40m³/h 200mm EW1710AC m³/h 200mm EW1710AC m³/h 225mm EW1710AC m³/h 250mm EW1710AC m³/h 250mm EW1710AC m³/h 300mm EW1710AC m³/h 350mm EW1710AC ,000m³/h 450mm EW1710AC ,600m³/h 500mm EW1710AC9200 EW1711A Bulk water meters for warm water 50 25m³/h 200mm EW1711AC m³/h 200mm EW1711AC m³/h 225mm EW1711AC m³/h 250mm EW1711AC m³/h 250mm EW1711AC m³/h 300mm EW1711AC m³/h 350mm EW1711AC m³/h 450mm EW1711AC ,000m³/h 500mm EW1711AC9200 Scope of Delivery EW170 Series water meter Installation and setup instructions Accessories Clip-on modules, suitable for all EW171 Wired M-Bus Pulse output RF EW171C-MBUS EW171C-PO EW171C-RF EN0H-0458GE25 R Honeywell All rights reserved
7 DIAGRAMS Accuracy Fig. 4. Accuracy chart EW171 Series Flow Diagram Fig. 5. Pressure drop diagram EW171 Series Honeywell All rights reserved 7 EN0H-0458GE25 R1014
EW447-EW452 Series Mechanical Heat Meters FOR HEATING AND COOLING APPLICATIONS
Design Hydronic meters of the EW447-452 Series consist of: Electronic energy integrator with fixed cable connection to the volume measuring component, supply and return temperature probe Mechanical volume
Metering Box METERING AND AMBIENT HEATING FOR HEATING SYSTEM. Overview. Application PRODUCT DATA
Metering Box METERING AND AMBIENT HEATING FOR HEATING SYSTEM Overview PRODUCT DATA The Honeywell Substations series consist of the following products: Metering Box (this datasheet) Heat Interface Unit,
aquaconcept Cold water
aquaconcept Cold water Applications The unique aquaconcept modular design covers a wide range of water applications. This innovative system offers all types of water measurement right up to data integration
ULTRAFLOW 54 DN
Data sheet ULTRAFLOW 54 DN150-300 For flow from 150 m³/h up to 1000 m³/h Ultrasonic flow sensor Compact design Static meter, no moving parts Large dynamic range No wear High accuracy Longevity MID-2004/22/EC
Applications. Features & Benefits ULTRASONIC WATER METER
MEASURE TODAY. ENSURE TOMORROW wprime TM Series 280W-CI Spire Metering offers the latest in Commercial/Industrial ultrasonic metering technology for reliable flow measurement. The rugged 280W-CI water
Metering systems 0670EN March 2017 Volumetric thermal energy meters for use in a boiler room GE552-1 series
Threaded version Flanged version GE552-1 Description The GE552-1 volumetric meters are used in the boiler room, to measure the heating and conditioning energy. They are strongly recommended for energy
meter SKU-03 (calculator and flow sensor) Fig.2. Calculator of the heat meter SKU-03
LABORATORY OF HEAT EQUIPMENT Certificate Nr. LT-1621-Ml004-00S issued 29 th April2011 Page I of 9 pages Harmonized standards applied: LST EN 1434-1:2007, LST EN 1434-2+AC:2007, LST EN 1434-3:2009, LST
V2880, Therafix Design Thera Design Edition - H-Block with TRV Insert WITH HIGH QUALITY SURFACE FOR DESIGN RADIATORS
W GE R MAN Y W GE R MAN Y V2880, Therafix Design Thera Design Edition - H-Block with TRV Insert WITH HIGH QUALITY SURFACE FOR DESIGN RADIATORS Design Angle left Straight W GE R MAN Y Angle right The Therafix
aquaconcept Cold water
aquaconcept Cold water Applications The unique aquaconcept modular design covers a wide range of water applications. This innovative system offers all types of water measurement right up to data integration
CBU144. Compact Booster Unit - single pump To ensure the quality of potable water according to EN1717. Product specification sheet
CBU144 Compact Booster Unit - single pump To ensure the quality of potable water according to EN1717 Product specification sheet Version The Compact Booster Unit consists of the following modules, that
V2075, V2077 Flowshare Valve THERMOSTATIC TWO-WAY FLOWSHARE VALVE
V2075, V2077 Flowshare Valve THERMOSTATIC TWO-WAY FLOWSHARE VALVE Application Thermostatic flowshare valves control the output of radiators in vertical one-pipe heating systems. Heating water not required
Magnetic-Inductive Flow Velocity Sensor PIT. Device Description
Magnetic-Inductive Flow Velocity Sensor PIT Device Description Table of contents 1 IDENTIFICATION...3 1.1 Manufacturer/supplier...3 1.2 Product type...3 1.3 Product name...3 1.4 Issue date...3 1.5 Version
M7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
13-1. Temperature Regulator
-1 Step 0 Type/Structure/Features Please refer to this for type, structure and features of. Step 1 Selection Please look at the ID chart to choose the right products depending on the intended uses. Details
Disc Type Steam Trap TSD-42
Disc Type TSD-42 TSD-42 is disc type steam trap for high pressure (maximum pressure: 4.2 MPa). It is compact and lightweight, and can be installed horizontally or vertically. Disc Ring By-Metal Valve seat
Catalog. Self-operated Regulators Volume 2 Temperature Regulators
Catalog Self-operated Regulators Volume 2 Temperature Regulators Self-operated Regulators Temperature Regulators Volume 2 Catalog 2012 Overview Self-operated Temperature Regulators 5 Self-operated Pressure
Differential Pressure and Flow Meter. Media 5 Indicator 160 Ø PN 50
Differential Pressure and Flow Meter Media 5 Indicator 160 Ø PN 50 Application Transmitter for measuring and indicating the differential pressure or measured variables derived from it Suitable for gases
Grafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: Internet: Fax:
Grafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: +45 45 81 23 00 Internet: www.gm.dk e-mail: gm@gm.dk Fax: +45 45 81 99 56 OPERATING INSTRUCTIONS FOR TF400 Folding Machine 2 Index
GRUNDFOS DATA BOOKLET UPS2. Circulator pumps. 50/60 Hz
GRUNDFOS DATA BOOKLET UPS2 Circulator pumps 50/60 Hz UPS2 Table of contents 1. Product introduction 3 Type key.................................................................................... 3 Performance
UW Purchase Specification Section Steam Condensate or Hot Water Meter Page 1 of 9
Page 1 of 9 PART 1 GENERAL 1.02 DESCRIPTION A. Purpose 1. This section covers steam condensate meters, steam condensate sub-meters and hot water sub-meters for use in the Owner's steam systems. 1.03 QUALIFICATIONS
Supply air unit VEKA Installation & Maintenance
November 2008 Safety instructions Operating the air treatment unit and accessory components WARNING Before the air treatment unit is taken into service, any free connections must be provided with protective
MFP14 Automatic pumps. for condensate and other industrial fluids
MFP1 Automatic pumps for condensate and other industrial fluids Effective condensate management... an essential part of any steam plant If energy requirements are to be kept to a minimum, then efficient
Synco living. Train the Trainer. Mounting Safety Devices. August 2007 Page 1/11 Train the Trainer - August 2007
Synco living Train the Trainer Mounting Safety Devices August 2007 Page 1/11 Train the Trainer - August 2007 Mounting the Door / window contact AP260 The door / window contact is supplied complete with
SonoSelect and SonoSafe Energy Meters
Installation & User Guide Energy Meters 09/2017 Danfoss VUIGB802 1 www.heating.danfoss.com Danfoss A/S DK-6430 Nordborg Denmark CVR nr.: 20 16 57 15 Telephone: +45 7488 2222 Fax: +45 7449 0949 EU DECLARATION
Water Safety Shut-Off Valve HON 790. Product information. serving the gas industry worldwide
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Installation in the hot water circuit of gas pre-heater systems for safeguarding of the
PRIUX HOME D. High-efficiency double circulating pumps Heating Air conditioning 50 Hz OPERATING RANGE APPLICATIONS BENEFITS
OPERATING RANGE Flow rate of up to 7 m /h* Manometric head of up to 8 mwc Max. operating pressure bar Min. suction pressure, bar at 9C Temperature range -C at 9C Max. ambient temperature +C EEI-Part Priux
Fan heater SWT Ceiling mounted fan heater with water heat
Fan heater heat 3 models Fan heater Ceiling mounted fan heater with water heat Application The fan heater is used for heating entrances, stores, industrial premises, workshops, sports halls, garages and
Magnetic-Inductive Flow Velocity Sensor PIT. Installation and Operating Instructions
Magnetic-Inductive Flow Velocity Sensor PIT Installation and Operating Instructions Table of contents 1 IDENTIFICATION... 3 1.1 Manufacturer/supplier... 3 1.2 Product type... 3 1.3 Product name... 3 1.4
Process Water Heater For Industrial Applications All Voltages, Single or Three Phase Up To 88 KW
MODEL V Process Water Heater For Industrial Applications All Voltages, Single or Three Phase Up To 88 KW Features Industrial Grade Construction Stainless steel pressure vessel provides maximum service
~256. Ventilator. Float valve. Plugged end (INLET) Straight connection DN kpa: 1.20 l/s (instantaneous value)
Date: 05 May 2009 Doc. 002190-2 TECHNICAL DATA 6543521 UNIT 2L, CONNECTION UPWARDS Mini-check Straight connection DN50 Rubber bend DN40 Connection DN40 83 ~195 35 Max. 3m ~256 Ø90 Evac Noback OUTLET Discharge
CALEFFI. Thermostatic regulating unit for heating systems. 166 series 01238/17 GB. replaces dp 01238/15 GB. Function
Thermostatic regulating unit for heating systems 66 series ACCREDITED ISO 9 FM 6 8/7 GB replaces dp 8/ GB Function The thermostatic regulating unit performs the function of keeping the flow temperature
F-1100 Series Single Turbine Meters Suitable for pipe sizes 1 ¼ and larger.
ONICON Insertion Turbine Flow Meters Provide an accurate, cost effective option for flow measurement of relatively clean liquids such as those found in closed loop HVAC systems. Each meter is built to
FlexFilter EX A state of the art filter system to meet your current and future needs
A state of the art filter system to meet your current and future needs Protect Your Staff and Increase Efficiency One of the hazards with combustible dust is that it settles on all surfaces within the
2500 Automatic Tank Gauge
Technical Information Ti 016G/03/en 2500 Automatic Tank Gauge Mechanical float gauge for continuous level measurement in storage tanks 2500 Automatic Tank Gauge (ATG) left with 2520 High Pressure version
Bead Roller Operating, Servicing, and Safety Instruction Manual
Bead Roller Operating, Servicing, and Safety Instruction Manual CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. 1-800-67-26 10 Cooperative Way
1592P01. for liquids in piping DN max. DC 48 V, 1 A, 20 W
594 59P0 Flow switch for liquids in piping DN 0 00. QE90 Contact load / switching capacity: Nominal pressure PN5 Manual setting of contact type (NO / NC) Housing IP 65 / safety class II Maintenance free
MFP14 Automatic pumps for condensate and other industrial fluids
MFP14 Automatic pumps for condensate and other industrial fluids Effective condensate management... an essential part of any steam plant If energy requirements are to be kept to a minimum, then efficient
The A-series Eletta Flow Monitor with local indication and analog output
The A-series Eletta Flow Monitor with local indication and analog output GL series FA series GSS series FSS series The Pipe Section is constructed of copper alloy and fitted with BSP/NPT threads from 15
EU-Type Examination Certificate
EU-Type Examination Certificate Measuring Instrument Directive Certificate number: 0200-MID-02784 Issued by FORCE Certification A/S, Denmark EU-notified body number 0200 In accordance with the Directive
GRUNDFOS DATA BOOKLET. Hydro Multi-S. Grundfos booster systems with two or three CM, CMV or CR pumps. 50 Hz
GRUNDFOS DATA BOOKLET Grundfos booster systems with two or three CM, CMV or CR pumps 50 Hz Table of contents 1. Product introduction 3 2. Performance range 4 with CM pumps 4 with CMV pumps 4 with CR pumps
Grain Flow. Grain Flow. Efficient Reliable Accurate. Automatic In-Bin Continuous Flow Grain Drying. David Manufacturing Co.
David Manufacturing Co. Grain Flow MAKING PRODUCTS AS RELIABLE AS THE PEOPLE WHO USE THEM. Efficient Reliable Accurate Automatic In-Bin Continuous Flow Grain Drying Grain Flow DMC s Best: Grain Flow with
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS
SECTION 23 70 00 AIR HANDLING UNITS PART 1. GENERAL 1.1 Section includes air-handling units to 15,000 cfm and accessories. 1.2 Related Sections 1 : A. Division 01 - Brown University Standard for Narragansett
Section B Field Instruments
91-00-01-01 Section B Field Instruments Contents Product Type Literature No. Overview 30-00-02-01 34 ST 3000 Series 100e Smart Pressure s SMV 3000 Smart Multivariable Model STM125 Series 100e Models Series
1592P01. for liquids in piping DN
1 594 1592P01 Flow switch for liquids in piping DN 20 200. QVE1901 Contact load / switching capacity: max. AC 230 V, 1 A, 26 VA max. DC 48 V, 1 A, 20 W Nominal pressure PN25 Manual setting of contact type
COMFORT IP: Room Control Unit Radio with Display
COMFORT IP: Room Control Unit Radio with Display The COMFORT IP Room Control Unit Radio with display registers the room temperature and the humidity in the assigned heating zone and regulates it via connected
Self-operated Temperature Regulators Series 43 Temperature Regulators Type 43-1 Type 43-2
Self-operated Temperature Regulators Series 43 Temperature Regulators Type 43- Type 43-2 Application Regulators for district heating supply systems, heat generators, heat exchangers, and other building
Installation and Commissioning Instructions FMU3 Floor Mixing Unit with Grundfos UPM3 Pump
Installation and Commissioning Instructions FMU3 Floor Mixing Unit with Grundfos UPM3 Pump Reduced Installation time Precision regulation Minimal tooling required 100% tested prior to packaging High quality
HyBo - Hydraulic Interface Unit AMBIENT HEATING AND DOMESTIC HOT WATER PRODUCTION FOR CENTRAL HEATING SYSTEM UNIT CODE EHIU1
HyBo - Hydraulic Interface Unit AMBIENT HEATING AND DOMESTIC HOT WATER PRODUCTION FOR CENTRAL HEATING SYSTEM UNIT CODE EHIU1 INSTALLATION, COMMISSIONING AND OPERATING INSTRUCTIONS Contents Unit as delivered
U86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
600A, Configurable. A powerful dust collector, for suction over long horizontal and vertical distance
A powerful dust collector, for suction over long horizontal and vertical distance The configuration of modules will be similar to 600A which are aimed for the toughest applications, for example handling
DP-500. Target Flowmeter. Flow measurement of Gases and Liquids. Instrumentation for fluids
Instrumentation for fluids Target Flowmeter Series DP-65 DP-500 Flow measurement of Gases and Liquids Metallic construction. Operates horizontally or vertically DN-80 to DN-500 Flow rate: - Water: 1.5
Watch Movement Specification and Drawing CHRONOGRAPH. Cal. YM62A. Movement Size. Casing Diameter. Ø 27.0mm. Height. 3.7mm. Battery Life.
Watch Movement Specification and Drawing CHRONOGRAPH Cal. YM62A Movement Size 12 Casing Diameter Ø 27.0mm Height 3.7mm Battery Life 3 years Date: 15/Dec./'17 Cal. YM62A Items Rev. Page Specifications 04
DP-500. Target Flowmeter. Flow measurement of Gases and Liquids. Instrumentation for fluids
UK / Europe Office Tel: +44 (0)8700 434040 Fax: +44 (0)8700 434045 info@omniinstruments.co.uk www.omniinstruments.co.uk Australia / Asia Pacific Office Tel +61 (0)282 442 363 Fax +61 (0)294 751 278 info@omniinstruments.com.au
108A OTP1800. Grid Support. General Description
Operation Manual 108A OTP1800 ON/OFF Main Switch On/Off Alarm Switch Digital Control Module Grid Support Alarm Fuse 250 Volt 15 amp Load Outlet Sensor Input Inlet General Description This control is a
VersaFlow Mag 2000 FL Electromagnetic Flow Sensor Technical Datasheet. Specification. Solution with high-tech ceramics. Highlights.
VersaFlow Mag 2000 FL Electromagnetic Flow Sensor Technical Datasheet 34-VF-03-21 September 2009 Specification Solution with high-tech ceramics The VersaFlow Mag 2000 FLelectromagnetic flow sensor is the
FAN TERMINAL UNITS Constant Volume (Series Flow), Standard Design
FAN TERMINAL UNITS Constant Volume (Series Flow), Standard Design Fan motor (PSC or ECM). UL Listed 1 insulation conforms to UL Test 181 and NFPA 90A. Plenum air filter rack. (Filter Optional) Casing has
Tank, Heater, and Control Operation Manual REV. E DATE: 04May2015
Tank, Heater, and Control Operation Manual 25-710-804 REV. E DATE: 04May2015 Hanson Research Corporation 9810 Variel Avenue Chatsworth, CA 91311 USA (800) 821-8165 (818) 882-7266 FAX (818) 882-9470 www.hansonresearch.com
Operating Manual. Model: Float-Controlled Condensate Trap, PN Safety instructions. 2 General description and usage
Model: 1090 1 Safety instructions Float-Controlled Condensate Trap, PN 16 1.1 Proper use Any improper use, intervention in the design and deviation from the design data automatically lead to termination
Chapter 7 DIRECT AND INDIRECT THERMAL ENERGY METERING
Chapter 7 DIRECT AND INDIRECT THERMAL ENERGY METERING 7 216 USER MODULES FOR DIRECT METERING GE555 STANDARD CONNECTIONS DIMENSIONS (L x H x D) mm BALANCING UNITS FOR SANITARY WATER METERS GE555Y461 3/4
Enraf Servo Gauge 854 XTG
Enraf Servo Gauge 854 XTG Cut costs, not repeatability. Honeywell s 854 XTG servo gauge is a high performance alternative to other tank level measurement technologies such as radar tank level gauges. It
Product Data Sheet Refrigerant Dryer DFLO-ES 66 (-W) to DFLO-ES 660 (-W) with energy saving management
Product Data Sheet Refrigerant Dryer -ES 66 (-W) to -ES 660 (-W) with energy saving management Version: 1.6.0 Author: Karsten Unger Datum: 05.07.2016 Field of application Refrigeration dryers of the -ES
Spare parts list GS GS GS 315
Spare parts list GS 0 - GS - GS Contents Water inlet Page Water softener GS 0, GS Page Water drain, Mediamat Cyclo Page Wash pump Page Bottom washing/rinsing system Page Top washing/rinsing system Page
DSS SERIES. Single Channel Hall Effect Speed Sensor. Product ID
Product ID Type # Product # Drawing # 378Z-05380 DSS 1210.00 STV (5m) 113807 374Z-04996 DSS 1210.02 PHV 112705 374Z-05052 DSS 1210.02 SHV (2m) 112865 378Z-05864 DSS 1210.12 AHV 115675 378Z-05910 DSS 1210.13
HCM 200D ZONING MANAGER FEATURES GENERAL PRODUCT DATA
ZONING MANAGER PRODUCT DATA GENERAL The Zoning Manager HCM 200D is designed to provide home automation control HCM 200D includes both, the 433 MHZ and 868 MHZ transceiver This provides backward compatibility
Figure 1 TWM1000 Electromagnetic Flow Converter. 1. Large, illuminated graphic display with intuitive operation 2. For AC and DC operation
TWM 1000 Electromagnetic Flow Converter Technical Datasheet 34-VF-03-24 August 29th, 2008 Specification The more than economical solution The TWM1000 offers a broad range of performance with an outstanding
Operator s Manual. IP-100 Immersion Probe Cooler
Operator s Manual IP-100 Immersion Probe Cooler 110-810 04.27.11 Table of Contents Introduction... 3 General Information... 3 General Safety Information... 3 Safety Recommendations... 4 Unpacking Your
ECONOFLAME R6000 GAS FIRED CONDENSING HOT WATER HEATER SUPPLEMENT
ECONOFLAME R6000 GAS FIRED CONDENSING HOT WATER HEATER SUPPLEMENT DOC1066 GB STOKVIS ENERGY SYSTEMS 96R WALTON ROAD EAST MOLESEY SURREY KT8 0DL TEL: 08707 707 747 FAX: 08707 707 767 E-MAIL:info@stokvisboilers.com
T6984F,G Electronic Floating Control Thermostats
T6984F,G Electronic Floating Control Thermostats FEATURES PRODUCT DATA P+I control action provides accurate, stable room temperature control. Used with ML644 Series 60 Direct Coupled Damper Actuators.
Model CV-1F Grooved End Swing Check Valves. General Description. Technical Data. Installation. Page 1 of 6 FEBRUARY 2016 TFP1550. Worldwide Contacts
Worldwide Contacts www.tyco-fire.com Model CV-F Grooved End Swing Check Valves General Description The TYCO Model CV-F Grooved End Swing Check Valves are compact and rugged swing-type units that allow
Product Training Module: Digital Pressure Sensors with CANopen Model DPS
Product Training Module: Model DPS Copyright 2012 Honeywell International Inc. All rights reserved. Summary Of Content In this training module, you will learn the following about Honeywell s Model DPS
AS950 REFRIGERATED SAMPLERS
AS950 REFRIGERATED SAMPLERS Applications Wastewater Collections Industrial Pretreatment Environmental Monitoring Stormwater Sampling has never been this easy. The AS950 Refrigerated Sampler makes programming,
TECHNICAL. Series 18. Pump Packages
TECHNICAL S Y S T E M S Series 18 Pump Packages Series 18 Pump Packages Standard Features Close-coupled, end-suction, centrifugal pumps Mounted and wired pump starters Hand-Off-Auto switch for each pump
Level Measurement Continuous level measurement Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. This intrinsically safe, 2 wire, 4 to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials
Installation Instructions Part No , Part No Part No
Torsion-Flex Motor mount for PSC motors and Rigid-Mount for ECM motors Replacement Kit Cancels: New Installation Instructions Part No. 327752-401, Part No. 327753-401 Part No. 327754-401 IIK-310A-45-11
MSL A B A BK3 OS P AB
Peerless Pump Company, LLC MSLA & MSMR Multistage Pump Selection SECTION 2920 Page 1 1. Select basic Pump size based on Hydraulics. (Use RAPID Version 6.2) 2. Review suction pressure 3. Look at Shut-Off
AIR HANDLER SPECIFICATION
AIR HANDLER SPECIFICATION Air Handlers AH-1 through 5 The following air handlers will be supplied: AH-1 FX15-4842 Series 5700 CFM AH-2 FX15-4236 Series 3990 CFM AH-3 FX15-3633 Series 2570 CFM AH-4 FX15-3330
GESTRA Steam Systems DK 45. English. Installation Instructions Steam Trap DK 45
GESTRA Steam Systems DK 45 EN English Installation Instructions 818676-00 Steam Trap DK 45 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 Danger...4 Attention...4 PED
PRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the SITRANS F M MAG 5100W Electromagnetic Flowmeter with MAG 5000, MAG 6000 or MAG 6000 Industry Transmitter DE-76181 Karlsruhe Germany manufactured
Differential Pressure and Flow Meter Media 5 Indicator 160 PN 40
Differential Pressure and Flow Meter Media 5 Indicator 160 PN 40 Application Instrument designed to measure and indicate differential pressure or measured variables derived from it For gases or liquids
PLEASE LEAVE THIS MANUAL WITH THE OSO UNIT AFTER INSTALLATION INSTALLATION MANUAL
PLEASE LEAVE THIS MANUAL WITH THE OSO UNIT AFTER INSTALLATION SOLARCYL IM/SC INSTALLATION MANUAL This manual gives detailed advice for installation and should be read carefully prior to fitting any unvented
STT 3000 Series STT250 Smart Temperature Transmitters Specifications Models STT25T EN0l-6091 February 2009
STT 3000 Series STT250 Smart Temperature Transmitters Specifications Models STT25T EN0l-6091 February 2009 Introduction Honeywell s STT 3000 family of microprocessor based transmitters covers the full
HUMIDIFIER EQQA, EQQZ
HUMIDIFIER EQQA, EQQZ INSTALLATION AND MAINTENANCE INSTRUCTION EQQA Once-through water 2- EQQA for circulated water.. 6-1 EQQZ-1 Humidifier cassette Ordering code. 16 EQQA Once-trough water EQQA for circulated
DATASHEET HIGH VOLUME LONG RANGE FOAM MONITOR GPM
DATASHEET HIGH VOLUME LONG RANGE FOAM MONITOR REV DESCRIPTION BY CHK DATE DOC. VFCPL/ONGC/SEL /500-750-1000/01 SHT No 1 of 6 A HIGH VOLUME LONG RANGE FOAM MONITOR MONITOR 1. GENERAL REQUIREMENT :- 1.1
Direct reading flowmeters type RM
FLOWMETERS 7 Direct reading flowmeters type RM The direct reading flowmeters type RM are flow measuring devices suitable for small flows of liquid and gaseous fluids. The measure cone is got directly from
MBM BC-10 Business Card Cutter
MBM BC-10 Business Card Cutter Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com MBM BC-10 BUSINESS CARD CUTTER OPERATION MANUAL Tokyo, August 1, 2006 CONTENTS SPECIFICATIONS
Overload relays. General descriptions. Configuration of the front
Overload relays General descriptions Type MT, bimetal-style, overload relays are designed to protect AC circuits and motors against overloads, phase failure, long starting times and prolonged stalling
GRUNDFOS DATA BOOKLET MTB. Centrifugal machine tool pumps 50/60 Hz
GRUNDFOS DATA BOOKLET Centrifugal machine tool pumps 5/6 Hz Contents General description Introduction 3 Applications 3 Special features 3 Identification Type key Codes Pump types and data Construction
CAP SERIES SEWAGE AND WASTE WATER PUMPS
Part 8 CAP SERIES SEWAGE AND WASTE WATER PUMPS TECHNICAL SPECIFICATIONS : Turbosan CAP series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and
MAGNA3 More than A pump
MAGNA3 More than A pump Full range of intelligent, high-efficiency circulators for heating, cooling, ground source heat pump systems and domestic hot water applications Features More than a pump If you
Ultrasonic Level Measurement nivopuls FDU 10 S
Technical Information TI 275F/00/en Ultrasonic Level Measurement nivopuls FDU 10 S Level limit switch for liquids with separate electronics unit Non-contact from outside Suitable for use in explosion hazardous
VersaFlow Coriolis 100 Mass Flow Sensor Technical Datasheet. Specification
VersaFlow Coriolis 100 Mass Flow Sensor Technical Datasheet 34-VF-03-09 29 TH May, 2009 Specification The universal solution for the process industry VERSAFLOW is the only sensor for mass flow in its class
Series DCT1000DC Dust Collector Timer Controller Specifications Installation and Operating Instructions
Series DCT1000DC Dust Collector Timer Controller Specifications Installation and Operating Instructions Bulletin E-97DC Thank you for purchasing the Dwyer DCT1000DC Dust Collector Timer Controller. You
Cold Soak Filtration Test (CSFT) of Biodiesel. ASTM D IP PM EA - CEN N CGSB 3.0 No Range
ASTM - IP PM EA - CEN N 403 - CGSB 3.0 No. 42 Completely stainless steel Drain to empty bath Overflow protection Large bath Very quiet Multiple options for levelling platforms Smart rack to position flasks
Rules for Intruder Alarm Systems
Rules for Intruder Alarm Systems Opening detectors (Magnetic contacts) Part 1: Requirements VdS 2120en 03/96 (03) Subject 44 1 General; 2 Terms and definitions; 3 Classification 1 General 1.1 Scope These
MAGNA3 MAGNA3. The full Grundfos product range covers all building application areas:
MAGNA3 We offer a complete range of MAGNA3 pumps with unrivalled efficiency, intelligent technology to match your every need and the well-known Grundfos reliability based on years of experience. MAGNA3
Weigh In Motion (WIM) Wheel Impact Load Detector (WILD)
Weigh In Motion (WIM) Wheel Impact Load Detector (WILD) The WIM & WILD is a smart solution entirely based on optical fibre sensors technology, that combines the Weigh In Motion (WIM) functionality with
manifold, for radiators
MMA, for radiators Eco-friendly materials, low lead content Quiet Precise and linear Dimension: DN 0 Temperature: C to + C Pressure class: PN 0 Description Area of use The Evoflow radiator is especially
Commercial, Residential & Institutional Pumps, Tanks, & Accessories
Taco International Commercial, Residential & Institutional Pumps, Tanks, & Accessories Taco Catalog # : 300-6.0 Supersedes: 300-3.5 9/11/06 Effective Date: 03/21/07 Printed in USA Pumps FI Frame Mounted
Model CV-1FR Riser Check Valves 2 to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data. Page 1 of 6 OCTOBER 2010 TFP950
Technical Services 00--9 +-0--0 www.tyco-fire.com Model CV-FR Riser Check Valves to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Riser Check Valve is a compact and rugged swingtype unit
LE 210 and LU 210 Series Load Measuring Pins
L/LU 210 ata Sheet L 210 and LU 210 Series Load Measuring Pins Features Temperature-compensated transducers with strain gauges in full-bridge configuration. vailable in 9 standard ranges from 5 kn to 1250