Belgian Shades. Customer Service phone fax 9:30 am to 6:00 pm EST. 1-Aug-11

Transcription

1 Belgian Shades Customer Service phone fax 9:30 am to 6:00 pm EST 1-Aug-11 DIZZ and DIZZ Design are trademarks of Diaz Sunprotection, NV and DM Cross Assoc., LLC Belgian Shade is a registered trademark of DM Cross Assoc., LLC

2 2 european style made simple ICFF 2011 New York City Intirio 2011 Ghent, Belgium T Phone: Fax:

3 3 european style made simple Table of Contents

4 4 european style made simple

5 5 european style made simple Belgian Shades Belgian Shades are meticulously detailed rather than overly embellished. Their transitional styling makes them an appropriate choice for formal or more relaxed interiors. DIZZ Belgian Shades are available in sizes up to 155 x 155. Shades up to 80 square feet can be made using our Elite clutch driven operating system that requires less than 1 ½ of mounting depth. This system allows designers and architects to use DIZZ shades to accommodate unique architectural features. A wide variety of automation options are also available. Our experienced dealers can help you with everything from a single shade with a hand held remote to incorporating our shades into the most advanced home automation systems. DIZZ Belgian Shades are manufactured at a state of the art facility in Tielt, Belgium. Shades are stitched never glued. Hem bar and batten pockets are side sewn but allow for bars to be removed. This technology allows DIZZ to line their sheer fabrics with a wide variety of different linings to create hundreds of different looks. Shown from left to right, Sparta : 1) Unlined 2) Lined with Hermes (Teal) 3) Lined with Good Night (Green) Note regarding child safety. Belgian Shades use lift cords that are exposed on the back of the shade. The Consumer Products Safety Commission (the CPSC) states that strangulation can occur if a child places his or her neck between the lift cords and the fabric. CPSC recommends the use of cordless shades in all homes where children live or visit. Belgian Shades are NOT cordless shades. Customer Service phone fax info@belgianshade.com 9:30 am to 6:00 pm EST

6 6 european style made simple Fabric Information All of the fabrics in the DIZZ line are double width. A fabric that is listed with Height means the fabric is shown railroaded on the hanger and in the book. Shades made from these fabrics will have no visible vertical seams. For more details on vertical seams see the Seams section on page 21. Information about individual fabrics including, price category, fiber content, repeat, width and/or height information as well cleaning information can be easily found on the reverse side of the swatch in the book. Fiber Content Repeat Price Category Cleaning Info (See page 9) Width (Breedte) or Height (Hoogte) Fabrics shown with Height (Hoogte Hauteur) are shown railroaded and will never have visible vertical seams when made as Belgian Shades Width/Height information as well as repeat is shown in centimeters. To convert to inches divide the centimeter number by Fabric information is shown in inches on the chart on page 8. Below is a quick conversion chart for available fabric widths: 280 cm = cm = cm = cm = cm = cm = 122

7 7 european style made simple The same information can also be found on the hanger tags. In addition, the hanger tags tell you about light fastness and shrinkage. In Europe, fabrics are rated on light fastness (a.k.a. color fastness) from 1 to 8, with 8 being the highest. The higher the light fastness the better a fabric retains its color over time when exposed to light. In other words, a higher light fastness rating means the fabric is less likely to fade in sunlight. All Dizz fabrics are rated 4 or higher, which is the standard for drapery fabric in Europe. However, customers who are using the fabric in a particularly sunny area should consider fabrics rated with a 5 or higher. In high humidity areas, particularly with inside mount shades, customers should consider using a fabric with 1% or <1% shrinkage rating. Repeat Width or Height Fiber Content Shrinkage Light Fastness Cleaning Information Price Category Enter fabric retail price here (To be inserted by dealer) While all DIZZ fabrics are designed to be used as window shades, customers who are using the shades in extreme situations (such as high humidity or very bright sunlight) should look for fabrics with high polyester content. DIZZ s design team travels the world to source their fabrics. If you have a question about a particular fabric, please let us know. All DIZZ Belgian Shades are manufactured in Belgium.

8 8 european style made simple NOTE RE: WIDTH vs HEIGHT : A fabric that is listed as being Height (e.g. Wizard = 117 H) that means the fabric is shown railroaded on the hanger and in the book. Shades made from these fabrics will have no visible vertical seams. See page 21 Seams for more information.

9 9 european style made simple Do not wash Cleaning Symbol Chart Wash at 30ᴼ C Wash at 40ᴼ C Wash at 30ᴼ C (anti-crease) Wash at 40ᴼ C (anti-crease) Wash at 60ᴼ C (anti-crease) Do not iron Iron at low temperature Warm Iron Hot Iron Do not bleach Chlorine Bleach Allowed Dry Cleaning. All solvents except trichloreteen Dry cleaning. All solvents except trichloreteen, but do not add water. Use gentle cycle. Dry cleaning. All solvents, but no water Use gentle cycle. Do not dry clean Do not tumble dry Tumble dry on low temperature

10 10 european style made simple Fire Rated Fabrics Three (3) fabrics in the DIZZ collection have been tested and meet the requirements of NFPA , Test 1. The three fabrics are: Eritrea (Sheer) Romulus Remus (Woven Dim-out) PDF Copies of the NFPA 701 certificates are available by calling Customer Service or ing Please note that Eritrea may be used as a lining for no additional surcharge compared to standard lining. (See page 11 for more information on linings.) Memo Samples Memo samples of all DIZZ fabrics offered in the US are stocked at our offices in Norwalk, CT. Memos are provided free of charge to authorized DIZZ dealers. Samples are approximately 8 ½ x 11. The most efficient way to order a memo sample is to Customer Service at info@belgianshade.com. Memo sample requests received by 1:00 pm EST will usually ship the same day via UPS ground delivery. Next day UPS delivery is available on memo samples for a $15 surcharge. Please be sure to specify the fabric and color number for the memo sample you are requesting. We will send memo samples directly to the dealer address on file unless otherwise instructed.

11 11 european style made simple Lining Options DIZZ has over 100 lining options. Any solid colored LB price group fabric can be used as lining at no additional surcharge compared to our standard lining. One of our most popular lining fabrics is Good Night which is a woven dim-out fabric that blocks 95% of light and comes in 27 colors. Another popular fabric is Hermes which is room darkening and comes in 32 colors. Both Good Night and Hermes are 100% polyester. Any fabric in the DIZZ line may be ordered with lining, including the sheers. Lining sheers with different colors allows you to create a wide variety of effects as shown below with style Sparta. Sparta Sparta Sparta Unlined Lining: Hermes (Teal) Lining: Good Night (Green) As a reminder memo samples are available free of charge to authorized dealers. This allows you to place one fabric behind the other on site to see how they look. Samples are approximately 8 ½ x 11 and ship from our offices in Connecticut usually in a day. customer service at info@belgainshade.com or call us at for memos. The fabrics that can be used for lining are below. Fabrics that are shown with Height (H) will have no visible seams when used as lining. Good Night and Hermes will have seams in the lining in shades over 104 wide. (See page 22)

12 12 european style made simple Size Information DIZZ Belgian Shades can be made in sizes up to 155 x 155. You may order in increments of 1/8. Inside/Outside Mount: If you are ordering an outside mount shade and want to reduce light leaking from around the edge, be sure to add an extra 4 to the window opening measurement (2 for each side). If you are ordering an inside mount shade, you should measure at the top, middle and bottom of the window and then enter the narrowest width. If you enter Inside under Mount, the factory will deduct ¼ from the width. Length: The finished length is from the top of the headrail to the bottom of the shade. The factory makes no deduction on length for inside mount. The minimum width for DIZZ Belgian Shades is 15 ¾ Please also note that the headrail size will vary with shade size. DIZZ Belgian Shades come with a 1 ¼ x 1 ¼ aluminum headrail clutch driven system, standard. Manual shades over 80 square feet will be on a 2 x 2 headrail system. For more information about headrail and bracket sizes see page 23.

13 13 european style made simple Rear Batten / Front Batten DIZZ Belgian Shades are available as either rear batten (shown left) or front batten shades (shown right). Whether they are rear or front batten, DIZZ Belgian shades have rings sewn at every batten and the fabric folds between the battens as the shades are raised. Fabric folds between the battens on either style Rear Batten Shade Front Batten Shade Fabric will fold between the battens when shades are raised on either rear or front batten styles Front batten shades are recommended whenever ordering a shade with a pattern or a stripe.

14 14 european style made simple Batten Spacing Unlike lower quality shades, the spacing between battens for DIZZ Belgian Shades is uniquely calculated for the specific length shade that you order. In general, the average batten spacing is 30 cm (or 11.8 ). When you order an unlined shade with a plain sheer fabric, the battens will be evenly spaced and the lift cords will be tied off at the hem bar as shown below. Shade in raised position Lift cord tied off on hem bar battens are evenly spaced. Unless specified, the following fabrics when ordered unlined will be constructed as shown above: Charme Evora Ecuador Guimard Elmira Wizard Eritrea

15 15 european style made simple When you order a lined shade or a shade with a solid or decorative fabric, the battens will be evenly spaced except for the bottom section (which will be ½ the size of the other sections) and the lift cords will be tied off at the lowest batten rather than the hem bar. This sewing technique is referred to as the sun protective flap. It prevents the face of the fabric from ever facing towards the window, and thereby helps reduce the chance of uneven fading on the front. Shade in raised position Lift cord tied off at last batten Last segment is ½ the distance of others The sun protective flap keeps the face of the shade away from the sun Our order form gives you the option of overriding the above rules and indicating whether or not you would like a sun protective flap. Note that matching battens between shades of different lengths may not be possible when using a sun protective flap. Specifically, the bottom batten may not line up. For questions on a specific situation, contact customer service for more details.

16 16 european style made simple Matching Battens When there are multiple shades in the same room that have varying lengths, you have the option of noting that you would like the battens to match from the top of the shade down. Indicate on your order which lines you would like to have match. When you receive the shades, the batten spacing will match from the top down. Different length shades with matching battens Please note that matching battens may have an effect on the size of the sun protective flap. Please contact customer service if you have a question on a specific order.

17 17 european style made simple Custom Batten Spacing When ordering unlined shades made in sheer fabrics you may specify where you want the battens to be placed to match up with architectural features (e.g., the window mullions). Specify the distance from the top of the headrail for each batten. The first batten is the top-most batten. There is no surcharge for Custom Batten Spacing. This information is filled in at the bottom of the form by indicating the line number and the batten spacing. As an example, if you enter Line # 1 and then 12, 25, 32 the shade on Line # 1 will be made with three battens: the first 12, the second 25 and the third, 32 from the top of the headrail. Custom Batten Spacing (Sheer Fabric ONLY) Line # Batten Spacing (distance from top of shade) Unlined shades with battens spaced to match mullions

18 18 european style made simple Shade Stack The shade stack is the distance from the top of the headrail to the bottom of the shade when the shade is fully raised. Below is a chart that gives you the approximate shade stack based on the length you are ordering. The actual stack may vary and can change if you request matching battens or custom batten spacing. Shade in raised position Shade stack The shade stack is also dependent upon the headrail you use. Shades made with the 2 Maxi system or Motorized shades will have a slightly larger stack.

19 19 european style made simple Safety Options Note regarding child safety. Belgian Shades use lift cords that are exposed on the back of the shade. The Consumer Products Safety Commission (the CPSC) states that strangulation can occur if a child places his or her neck between the lift cords and the fabric. CPSC recommends the use of cordless shades in all homes where children live or visit. Even with the additional safety options, Belgian Shades are NOT cordless shades. Breakaway Rings (available 2012) Breakaway rings are 2 piece rings that are sewn in place of the normal rings on the lower 5 (60 ) of the shade. Regular rings are used for the rest of the shade (which would normally be out of a child s reach). This reduces the chance that a ring would accidentally break away at a place that could not be easily reached to reattach the ring. Shades under 60 long ordered with breakaway rings will have breakaway rings the entire length of the shade. The rings are designed to break away at approximately 3 pounds of force. Rings are sewn on the lower 5 (60 ) of the shade Close up of ring in normal engaged position Ring that has broken away. Rings have been designed to break away at an average of 3 pounds of force or less.

20 20 european style made simple Shroud System The shroud system uses a shroud that is attached at every ring. The lift cords pass though the shroud. The maximum batten spacing for shades made with the shroud system is 7.5 (approximately 60% of our normal batten spacing). The shroud reduces the chance that a hazardous loop can form. Cord Shroud with lift lines running through them Maximum batten spacing 7.5 Shroud reduces the chance a large loop can form Shroud gathers around lift lines as shade raises There is NO surcharge for either the Breakaway Ring or Shroud System safety option.

21 21 european style made simple Seams All DIZZ fabrics are 110 wide or wider. Many of the fabrics can be railroaded (or turned) so that there are no vertical seams. A fabric that is listed by Height means the fabric is shown railroaded on the hanger and in the book. Shades made from these fabrics will have no visible vertical seams. For the fabrics that cannot be railroaded, when you order a shade that is wider than the fabric width less 6, there will be vertical seams. If you select a 110 wide fabric, (e.g. Hermes ) any shade over 104 wide will have seams. The standard method of seaming is to have a large center panel and 2 side panels. The side seams have to be a minimum of 5 ½ in from the edge of the shade. Seams can be no closer than 5 ½ from the edge 5 ½ You can specify where you would like the seams to be placed, as long as they are no closer than 5 ½ to the edge of the shade. Some customers, when putting shades side by side, may not want right and left seams. You can indicate no seam on one side and specify the distance on the other to create this look.

22 22 european style made simple You can also specify seam placement so that the seams line up with the mullions in the window, or any other architectural feature. Seams - Lining Most lining fabrics can be turned so that there are no visible seams in the lining. The main exception is when you select either styles Hermes or Good Night as lining. Shades over 104 wide that are lined with Good Night or Hermes will have visible, vertical seams in the lining. When selecting Good Night or Hermes as lining with a face fabric that will also have visible seams (a Width or W fabric), the lining seam will be hidden behind one of the face fabric seams. When selecting Good Night or Hermes lining with a face fabric that has no visible vertical seams (a Height or H fabric) the lining seam will be in the middle. Alternatively, you may specify where you would like the lining seam(s) to be just as you can with a face fabric.

23 23 european style made simple Manual System (Dimensions) Elite System: Shades up to 80 square feet will come on our Elite clutch driven headrail system. This system incorporates an internal gear box that allows shades to lift easily. Shades under 15 square feet can be ordered without a gearbox for faster raising and lowering. The distance from the back of the bracket to the front of the rail is 1.5 The distance from the top to the bottom of the rail is Bracket mounts to wall or ceiling

24 24 european style made simple Maxi System: Shades over 80 square feet will be mounted on our 2 Maxi Headrail system. This system is capable of easily lifting our largest shades (155 x 155 ). You may request that shades smaller than 80 square feet have the Maxi system for no additional surcharge.

25 25 european style made simple Control Side Please indicate whether you want the control chain on the left or the right side. If no indication is made, the control will be on the right. For motorized shades, the control side indicates which side the motor, and therefore the wire for power, will be on the shade. Chain Colors (Manual System) With the 1 Elite System you may choose from plastic chains in transparent, white, grey or black or metal chains in silver, grey, matte gold or messing (brass). The 2 Maxi System is only offered with metal chains (silver, grey, matte gold or brass). Metal Chain Colors (For Elite and Maxi System) Plastic Chain Colors (Elite System only) Silver Grey Gold Messing (Brass) Chain Sizes Transparent White Grey Black Chain sizes start at 20 drops and run in 10 increments up to 100 long. You may select the chain length you would like. If you do not select a chain size, the chain you receive will be approximately 2/3rds the length of the shade. The available chain sizes are:

26 26 european style made simple Tension Device The Consumer Products Safety Commission (CPSC) advises consumers that children can become entangled in and possibly strangle themselves on control chain loops. To help prevent these accidents we provide tension devices attached at the factory that will partially prevent the roller shade from operating unless it is attached to the wall or sill. The devices will work with both inside mount and outside mount applications. The tension device is installed on the chain at the factory and will not allow the shade to fully operate unless it is installed Device comes in clear only.

27 27 european style made simple Motorized System (Dimensions / Specifications) Motorized shades come in an enclosed aluminum headrail and use a Somfy LS40RTS motor with integrated radio receiver. The system comes with a 16 wire exiting from either the the left or the right side (Please specify which side under Control Side ). The system can easily lift our largest shade (155 x 155 ). The system operates on 115 volts and requires 1 amp. As the system is controlled by an integrated radio receiver, no special wiring is required, only a power source. See next page for remote control options. We can also provide a Lutron QED 64 motor in this headrail. Please contact us for control details and lifting capacity if your project requires Lutron motorization. The bracketing system allows the shade to be mounted on either the wall or the ceiling.

28 28 european style made simple Remote Control Options (Motorized) The Telis hand held remote from Somfy comes in two versions, the Telis 1 and the Telis 4. The Telis 1 has one channel and will control a single shade or a group of shades simultaneously. If the Telis 1 is used to control multiple shades in a group, you cannot operate the shades individually. The Telis 4 has 5 channels and will control up to 4 shades individually with one group channel that allows you to control all the shades simultaneously. Both the Telis 1 and the Telis 4 are available in 3 colors, Pure (white with grey buttons), Silver and Lounge (Black). Tels 1 Pure Telis 4 Pure Telis 1 Silver Telis 4 Silver Telis 1 Lounge Telis 4 Lounge

29 29 european style made simple We also offer the Somfy Decoflex Wall Switch. The switch is mounted to the wall and is operated by an extended life lithium battery (included with the remote) and therefore requires no wiring. Shades are radio frequency controlled. The Decoflex switches come in 1 button and 5 button models. The 5 button model allows you to control up to 5 shades or groups of shades individually. Each version is available in three colors, white, ivory and black. Decoflex 1 Button White Ivory Black Decoflex 5 Button White Ivory Black

30 30 european style made simple Index DIZZ Belgian Shade Fabrication Plant Tielt, BE