STEAM EQUIPMENT 4

Size: px

Start display at page:

Download "STEAM EQUIPMENT 4"

Melinda Barrett
5 years ago
Views:

1 STEAM EQUIPMENT 4

2 ( )MK-16 BELLOW SEALED VALVE (1)ASD DEAERATOR TANK SECTION (FEED WATER, BOILER COLLECTOR (HEADER) ( )V3-F STAINLESS STEEL BALL VALVE (2)MG-33S MAGNETIC LEVEL GAUGE DEAERATOR, CONDENSATE RECOVERY) (17-23)PTY-30 STRAINERS (3)NK-16 BOILER WATER SAMPLING GASKETINER (3)BOILER WATER SAMPLING GASKETINER NK-16 ( )BELLOW SEALED VALVE MK-16 (18-24)TKON STEAM TRAP CONTROLLING UNIT (4)YBS-10 SURFACE BLOWDOWN SYSTEM (1) DEAERATOR ASD (4)SURFACE BLOWDOWN SYSTEM YBS-10 (16-21)STAINLESS STEEL BALL VALVE V3-F (19)TDK-45 THERMODYNAMIC STEAM TRAP (5)MK-16 BELLOW SEALED VALVE (2)MAGNETIC LEVEL GAUGE MG-33S (5)BELLOW SEALED VALVE MK-16(-26)CLV- CHECK VALVE (17)STRAINERS PTY-30 (6)BOILER PROPORTIONAL LEVEL CONTROL SYSTEM (6)BOILER PROPORTIONAL LEVEL CONTROL SYSTEM (18)STEAM TRAP CONTROLLING UNIT TKON ()SK-51 FLOAT TYPE STEAM TRAP WITH AIR VENT (7)L9-BP SAFETY VALVE (7)SAFETY VALVE L9-BP (19)THERMODYNAMIC STEAM TRAP TDK-45 (8)KP-01 CAPACITIVE LEVEL ELECTRODE (9)MG-33 MAGNETIC LEVEL GAUGE ()CHECK VALVE CLV- (8)CAPACITIVE LEVEL ELECTRODE KP-01 (10)DBV-10 BOTTOM BLOWDOWN VALVE (9)MAGNETIC LEVEL GAUGE MG-33 (10)BOTTOM BLOWDOWN VALVE DBV-10 STEAM TRAP UNIT (11)BELLOW SEALED VALVE MK-16 (22-27)STAINLESS STEEL BALL VALVE V3-F (23)STRAINERS PTY-30 (24)STEAM TRAP CONTROLLING UNIT TKON ()FLOAT TYPE STEAM TRAP WITH AIR VENT SK-51 (26)CHECK VALVE CLV- STEAM EQUIPMENT

3 STEAM TRAPS SELECTION TABLE A: Best Option B: Acceptable, Alternative SYSTEM Float Type (Air and Gas Vent) (SK- SK51-SK55-SK60- SK70) Inverted Bucket Type (BT-16) Thermodynamic (TDK-45) THERMOSTATIC Thermostatic (TKK- 2Y-2N,TKK-21,T- KK-41) Thermostatic With 3 Capsules (TKK-3) Main Steam Lines Horizontal Lines B B A B Before Seperator A B B B Line Ends B B A B Line Discharge B Trace Lines A Collector (Collect- Distribute ) B B A Volume Heating Equipment A B Heat Exchanger A B B Plate Tanks A B B Fuel-Oil Pre Heaters A B B Water Heaters A B B Heating Batteries A B B Panel Or Plate Heaters B A B Radiator Or Convector B B A B B Roof Heating Serpantine B A B B Drying Rooms B A B B Green House Heaters B A B B Air Tool B A B B Sugar Drier Kitchen Appliances A B B Fixed Cooking Boilers A B Movable Cooking Boilers B A Standing Cooking Boilers A Steam Oven B A Hot Plates Medical Equipment B B A Autoclaves B B A Sterelizers A B B Pressurized Cookers Process Tools A B B Fixed Boilers A Movable Boilers A B Beer Boilers A B B Grinders A B Evaparators B A B Hot Plates (Jacketed) A B Distillation Equipment A B Tanks B A Vulcanization Tools Bimetallic (TK-1) Super Condensate Discharger (HK-23)

4 STEAM TRAPS SELECTION TABLE A: Best Option B: Acceptable, Alternative THERMOSTATIC SYSTEM Float Type (Air And Gas Vent) (SK-SK51-SK55- SK60-SK70) Inverted Bucket Type (BT-16) Thermodynamic (TDK-45) Thermostatic (TKK-2Y-2N,TKK- 21,TKK-41) Thermostatic With 3 Capsules (TKK-3) Bimetallic (TK-1) Super Condensate Discharger (HK-23) Dip Oil Boilers A B B B Cheese Boilers A B B B Candy Boilers A B B B Drying Cylinders Constant Drying Serpantines A B B B Grid Drying Serpantines B B A Drying Cylinders A B Multiple Drying Serpantines A B B Multi Cylinder Driers A B Rotating Driers A B B Paper Dough Driers A B B Fabric And Paper Drier Cylinders A B B Laundry Equipment Apparel Presses B B A Irons B B A B Solvend Collecting Unit A B B Drum Driers A B Tanks Process Tanks (Upper Outlet) B B A B Process Tanks (Bottom Outler) A B B B Short Serpantine Heating Tank (Fast) A B B Oil And Asphalt Tanks A B B Paint And Polish Tanks A B B Evaparators A B B Mixer Tanks A B B Fuel-Oil Tanks A B B Presses Multi Plate Preeses (Parallel) B B A Multi Plate Preeses (Serial) B A Tyre Presses B A B Vulcanization Presses B A B B Moulding Presses B A B B Plywood Presses B A B B Fuel Heating Main Fuel Tank Heaters A B Line Heaters A B Straight Line Heaters, Jacketed Pipelines B B B B Turbines A B B Marine Applications A B B B

FLOAT TYPE STEAM TRAPS WITH AIR VENT SK- and Cover Iron Casting GG-(DN32--) Ductile Iron GGG.

Differential Pressure ( P) 4,5-10-14 32 1 1/4 1 FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-51 / SK-51C and Cover

3 Internals and float AISI 304 and threaded * SK-51C: The thermostatic unit can be disabled by balance rod.

and float and threaded Differential Pressure ( P) 4,5-10-14 32 1 1/4 1 FLOAT TYPE STEAM TRAPS WITH AIR VENT

5 FLOAT TYPE STEAM TRAPS WITH AIR VENT SK- and Cover Iron Casting GG-(DN32--) Ductile Iron GGG.3 Internals and float AISI 304 and threaded Max. Differential Pressure ( P) 4, /4 1 FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-51 / SK-51C and Cover Ductile Iron GGG.3 Internals and float AISI 304 and threaded * SK-51C: The thermostatic unit can be disabled by balance rod. Differential Pressure ( P) 4, FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-55 and Cover Cast Iron GG Internals and float and threaded Differential Pressure ( P) 4, /4 1 FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-61/SK-61C and Cover AISI 316 Internals and float and threaded * SK-61C: The thermostatic unit can be disabled by balance rod. bar Max. Differential Pressure ( P) 4, FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-61 WITH SIGHT GLASS and Cover AISI 316 Internals and float and threaded bar Max. Differential Pressure ( P) 4, FLOAT TYPE STEAM TRAPS WITH BIMETALIC AIR VENT SK-B and Cover Iron Casting GG-(DN32--) Ductile Iron GGG.3 Internals and float AISI 304 and threaded Max. Differential Pressure ( P) 4, /4 1

6 STEAM EQUIPMENT FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-51SLR and Cover Ductile Iron GGG.3 Internals and float AISI 304 and threaded Differential Pressure ( P) 4, FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-55 WITH SIGHT GLASS and Cover Ductile Iron GGG.3 Internals and float AISI 304 and threaded Differential Pressure ( P) 4, /4 1 FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-80 and Cover Internals and float Iron Casting GG- bar Max. Differential Pressure ( P) 4, FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-70 Cast Steel GSC Cover Cast Steel GSC Internals and Float and threaded bar Pressure Class PN32 Max. Differential Pressure ( P) 4, (DN ) FLOAT TYPE STEAM TRAPS WITH AIR VENT SK-70 WITH SIGHT GLASS and Cover Cast Steel GSC Internals and float AISI 304 and threaded Differential Pressure ( P) 4, FREE FLOAT TYPE STEAM TRAPS SFK- and Cover Ductile Iron GGG.3 Float Filter and Shooter Air Unit Max. Operating Temperature (TMO) 2 C Max. Differential Pressure ( P)

7 THERMODYNAMIC STEAM TRAPS TDK-45 Forged Steel Cover AISI 304 Strainer, Disc, Seat AISI 304, threaded, socket And Socket (Inch) bar Max. Operating Temperature (TMO) 0 C THERMODYNAMIC STEAM TRAPS TDK-71 AISI 304 Cover AISI 304 Strainer, Disc, Seat AISI bar Pressure Class PN63 Max. Operating Temperature (TMO) 0 C and Socket (Inch) BI-METALLIC STEAM TRAPS TK-1 Forged Steel Cover AISI 304 Strainer, Disc, Seat AISI 304,, Socket bar Max. Operating Temperature (TMO) 0 C 32 and Socket 1 1/4 1 THERMOSTATIC STEAM TRAPS TKK-2Y and Cover Forged Steel Strainer, Seat AISI 304 Thermosatic Capsule Hastelloy Check Valve Brass MS 58,, Socket And Socket (Inch) THERMOSTATIC STEAM TRAPS TKK-2N and Cover Forged Steel Strainer, Seat AISI 304 Thermosatic Capsule Hastelloy Check Valve Brass MS 58, Socket and Socket THERMOSTATIC STEAM TRAPS TKK-21 and Cover Forged Steel Strainer, Seat AISI 304 Thermosatic Capsule Hastelloy 3/8

STEAM EQUIPMENT THERMOSTATIC STEAM TRAPS TKK-41/42 AISI 304 AISI 316 (opt.

Ductile Iron GGG.3 Cover Ductile Iron GGG.

Cover Forged Steel Thermostatic Capsule AISI 304 Strainer, Seat AISI 304 32 and Welded (Inch) 1 1/4 1 THERMOSTATIC AIR

Operating Temperature (TMO) 0 C THREADED (mm) THERMOSTATIC AIR DRAINERS TKK-61 AIR ELIMINATOR and Cover Brass Thermostatic

8 STEAM EQUIPMENT THERMOSTATIC STEAM TRAPS TKK-41/42 AISI 304 AISI 316 (opt.) Thermostatic Capsule Hastelloy Strainer, Seat AISI bar THERMOSTATIC STEAM TRAPS HK-23 SUPER CONDENSATE RELEASER Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Thermostatic Capsule Hastelloy & Internals AISI bar THERMOSTATIC STEAM TRAPS TKK-3 WITH 3 CAPSULES and Cover Forged Steel Thermostatic Capsule AISI 304 Strainer, Seat AISI and Welded (Inch) 1 1/4 1 THERMOSTATIC AIR DRAINERS TKK-11 AIR ELIMINATOR and Cover Brass Thermostatic Capsule Hastelloy Internals AISI bar Max. Operating Temperature (TMO) 0 C THREADED (mm) THERMOSTATIC AIR DRAINERS TKK-61 AIR ELIMINATOR and Cover Brass Thermostatic Capsule Hastelloy Internals AISI bar Max. Operating Temperature (TMO) 0 C THREADED (mm) INVERTED BUCKET STEAM TRAPS BT-16 Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Internals and Float Max. Operating Temperature (TMO) 2 C Max. Differential Pressure ( P) 5,4-8,5-,5 (Inch)

9 VACUUM BREAKERS VK-70 Brass Cover Brass Internals AISI 304 (mm) VACUUM BREAKERS VK-71 AISI 304 Cover AISI 304 Internals and float AISI 304 bar Max. Operating Temperature (TMO) 0 C (mm) STEAM SEPERATORS SPR-16// Carbon Steel / (Optional) Internals AISI 304 Condensate output Air output 16// bar Max. Operating Temperature (TMO) 0 C PN 16 FLANGED THREADED PRESSURE REDUCING VALVES BDV- PRESSURE REDUCING VALVES GD-30 Ductile Iron GGG.3 Shaft, Seat, Strainer AISI 304 Internals AISI 304 Max Inlet Pressure 19 bar Max. Outlet Pressure 8.6 bar Set Pressure 0,14-1,7 bar 1,4-4,0 bar 3,5-8,6 bar Max. Operating Temperature 210 C Main Valve Seat Diaphragm Bronze Casting Bronze Max Inlet Pressure 17 bar (PN Max. Outlet Pressure 8.6 bar Set Pressure B Type 0,5-4 bar C Type 3,5-10 bar Max. Operating Temperature 210 C THREADED THREADED 1 PILOT INFLUENCED PRESSURE REDUCERS GP-00 Ductile Iron GGG.3 Main and Pilot Valve Seats, Diaphragm and bar Max. Operating Temperature (TMO) 2 C Field Settings (0,2-1,5 bar) / (1-14 bar) Spring Colour Yellow (0,2-1,5 bar) / Green (1-14 bar)

10 STEAM EQUIPMENT FLOAT TYPE AIR DRAINERS HA-51 AIR DRAINER Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Internals and float AISI 304 and FLANGED THREADED FLOAT TYPE AIR DRAINERS HA- AIR DRAINER Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Internals and float AISI 304 and FLOAT TYPE AIR DRAINERS HA-52/62 and Cover Ductile Iron GGG.3 (HA-52) AISI 316 (HA-62) Internals and float AISI 304 THREADED x FLOAT TYPE LIQUID DRAINERS SA-51 LIQUID ELIMINATOR Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Internals and float AISI 304 and By-pass hole (Optional) FLANGED THREADED FLOAT TYPE LIQUID DRAINERS SA- LIQUID ELIMINATOR Ductile Iron GGG.3 Cover Ductile Iron GGG.3 Internals and float AISI 304 and By-pass hole (Optional) FLANGED 32 THREADED 1 1/4 1 STEAM TRAP TEST VALVE KTV-10 Material AISI 304 AISI 316 Ball Material AISI 304 AISI 316 Gasket PTFE PTFE Ball Seat R-PTFE (%) R-PTFE (%) Connection Type and and Nominal Pressure (PN) bar bar Max. Operating Temp. -/+210 C -/+210 C FLANGED THREADED DN DN DN DN32 1¼ DN 1½ DN

11 CONDENSATE CONNECTION MANIFOLDS KT-13 Carbon Steel C 22.8 Internals Volan Carbon Steel /Socket 26 bar KV Valve 1.8 m³/s THREADED (mm) PIPELINE CONNECTORS BK-33 (TD-SK) AISI 304 Seat and Disc AISI 4 Internals Volan Carbon Steel /Socket 42 bar Max. Operating Temp. (TMO) 3 C THREADED, SOCKET PIPELINE CONNECTORS BK-33 SK (FLOAT TYPE) and Cover AISI 304 Internals and Float AISI 304 Thermostatic Unit AISI 304 Volan Carbon Steel /Socket Max. Operating Temp. (TMO) 286 C Differential Pressure 4,5/10/14 bar THREADED, SOCKET PIPELINE CONNECTORS BK-33 TK (THERMOSTATIC) and Cover AISI 304 Capsule Internals Volan Carbon Steel /Socket Max. Operating Temp. (TMO) 2 C Differential Pressure 21 bar THREADED, SOCKET PIPELINE CONNECTORS BK-33 BM (BI-METALLIC) AISI 304 Bi-metallic Plates AISI 304 Internals AISI 304 Volan Carbon Steel /Socket Max. Operating Temp. (TMO) 3 C Differential Pressure THREADED, SOCKET PNEUMATIC CONTROL ON/OFF VALVES PKV- Material AISI 316 Gasket PTFE Connection Type Nominal Pressure (PN) Max. Operating Temp. 180 C THREADED (mm) 1¼ 1½

12 STEAM EQUIPMENT VORTEX STEAM FLOW METER BS-10 Fluid Steam, Water, Air Sensitivity +/- %1 Safety Class IP 67 Immersion / Max. Working Pressure (PMO) Max. Working Temperature (TMO) Power Supply 0 bar 4- MA output and Alarm Setting Plus ve Hart Protocol 24V FLANGED (mm) CONDENSATE PUMP SYSTEM ACOP Steam Pressure Range 2-10 bar Air Pressure 4-6 bar Power Supply 230 V AC Hz Design Pressure 11 bar Design Temperature 187 C Evacuation Capasite in one time lt Steam Consumption 3 kg/1000 kg condensate DISCHARGE CAPACITIES (kg/h) 100i i i -30 0i i i FLASH STEAM RECOVERY SYSTEM AFBT 13 bar Max. Operating Temp. (TMO) 0 C Connection Flanges PN 16 St 37 Carbon Steel STEAM CAPACITIES Type Flash Steam (kg/h) AFBT1 2 AFBT2 4 AFBT3 900 AFBT4 1.0 AFBT AFBT6 2.0 AFBT7 3.0 AFBT COMPACT DEAERATOR HEAD & SYSTEM ASD De-Aerator Cover Immersion Tube Design Pressure 7 bar Design Temperature 180 C CONDENSATE CAPACITIES Type Condensate (kg/h) ASD kg/h ASD kg/h ASD kg/h ASD kg/h DE-SUPERHEATER ADES-10 A 116 gr B 7A335 P11 Nozzle 316 Pressure Class PN16 / PN160 - ANSI 0 / ANSI 00 Line Type DN Water DN... DN Steam Immersion Steam Line DN100...DN0 DN0... DN0 CONDENSATE POLLUTION CONTROL SYSTEM KKS-10 - Stainless Disc Checkvalve - Double Effective Pneumatic Actuated Stainless Ball Valve Normally Open - Double Effective Pneumatic Actuated Stainless Ball Valve Normally Closed - Conductivity Transmitter B&C Electronic C mA (110x90x60mm) - Conductivity Sensor Sensorex CS675 HTTC 0 PSI 0C 1" Diving Length Sensor Diameter 19mm Cable Side 3/4ADK-100 Controller - Stainless Ball Valve 304 Quailty

Operating Temperature (TMO) 2 C FLANGED THREADED DN DN DN DN32 1¼ DN 1½ DN SURFACE BLOWDOWN SYSTEM YBS-10/ Conductivity Measuring Probe Conductivity Transmitter (with LCD screen) Digital Regulator

13 SIGHT GLASS CONDENSATE CONTROL SG and Cover Iron Casting GG- Glass Tempered Sodalime Glass Internals AISI 304 and Sealing Gaskets PTFE Max. Operating Temperature (TMO) 0 C,, 32, 65, (Inch) 1 1/4 1 STEAM TRAP CONTROLLING UNIT T-KON-/21 Ductile Iron GGG.3 Inner Components Gaskets PTFE Max. Operating Temperature (TMO) 2 C FLANGED THREADED DN DN DN DN32 1¼ DN 1½ DN SURFACE BLOWDOWN SYSTEM YBS-10/ Conductivity Measuring Probe Conductivity Transmitter (with LCD screen) Digital Regulator Surface Control Valve with Electric Motor Service Support Before Installation DN PN Metal Bellows Valve DN PN Disco Check Valve DN (Standard) DN (Optional) Please contact our sales team for customized dimensions. BOTTOM BLOWDOWN VALVE DBV-10 3 Pieced Ball Valve (V-3FP) Timer (Controller) Pnuematic Actuator Single Actuation (Standard, NC) Spring Controlled Selenoid Valve Limit Switch Double Actuation (Optional) DN (Standard) DN (Optional) Please contact our sales team for customized dimensions. LEVEL REGULATORS A-1/2/2F Ductile Iron GGG.3 Float AISI 316L Spindle AISI 304 Bellow AISI 316L Connection BSPT (A-2) / DN Pressure Class (A-2F) PN BOILER PROPORTIONAL FEED WATER SYSTEM Level Device KP01 3R and Electrodes Stainelss Steel Case Aluminum Injection Injection Connection BSP Max. Working Pressure 238 bar Max. Working Temp. 32 ºC Level Control Valve Connection Controller Max. Working Pressure PN Max. Working Temp. 4 ºC N Cast Iron Ayvaz ADK-100 Proportional Level Controller Length 300, 0 700, , Size DN32 DN DN

14 STEAM EQUIPMENT BOILER WATER SAMPLING GASKETINER NK-16 Serpentine AISI 316 L Connection 3 Serpentine Nominal Pressure PN Cold Water Input-Output Nominal Pressure PN 16 MAGNETIC LEVEL GAUGES MG-33 AISI 316 Float AISI 316L Magnetic Disc Plastic Flange Material Carbon Steel St (Opt. ) Flange Max. Operating Pressure Max. Permissible Temperature 160 C Contact Signal Yes Drain Plug () PN16 Length (mm) DN DN DN DN32 DN DN LEVEL CONTROLLERS FOR STEAM BOILERS RC-11 LEVEL GAUGE WITH SIGHT GLASS Cast Iron GG- Frame A105 Drain Plug and Liquid main Cast Iron GG- Flange Max. Operating Pressure / bar Max. Operating Temperature 0 C () PN 16, PN DN Length (mm) LEVEL CONTROLLERS FOR STEAM BOILERS ELK-4/ELK-4F Box Panel Aluminium Injection Flange Forged Steel Electrodes Electrode Insulation PTFE Intermediate Disc PTFE and threaded Max. Operating Pressure Max. Operating Temperature 238 C Control Type On/Off () DIN ISO 228/1 () PN, DIN 2635 Size DN Length (mm) LEVEL CONTROLLERS FOR STEAM BOILERS KP-01 CAPACITIVE LEVEL ELECTRODE Box Panel Aluminium Injection Flange Forged Steel Electrodes Electrode Insulation PTFE Intermediate Disc PTFE and threaded Analog Output 4- ma or (0-10V) Max. Operating Pressure Max. Operating Temperature 238 C KP01 () DIN ISO 228/1 KP01-F () PN,DIN 2635 Size DN Length (mm) STAINLESS STEEL SAFETY VALVES L9-LS CF8 Seat 304 or CF8 Disc 304 or CF8 Spring 304 Sleeve 304 Operating Pressure 0,3-2 kgf/cm2-2,1-10 kgf/cm2-11- kgf/cm2 Operating Temperature C / 290 C - Angled and straight types are available

15 A C F BELLOW VALVES MK-16// Grey Cast Iron EN-GJL-0 Nodular Cast Iron EN-GJS-0 Cast Steel Seat Ring X12Cr13 X12Cr13 - Disc X12Cr13 X12Cr13 XCr Bellow X6CrNiMoTi X6CrNiMoTi X6CrNiTi Connection Max. Temperature 300 C 3 C 0 C Max. Pressure bar bar Nominal Diameter DN -0 DN -0 DN -0 Tests acc. EN Flanges drilled according to EN for body material A, C Flanges drilled according to EN for body material F Face-to-face dimension according to EN series 1 GLOBE VALVES GV-16// GV-16 GV- GV- GG- Cast Iron GSC- Cast Steel GSC- Cast Steel Seat AISI 304 AISI 304 AISI 304 Disc Connection -FLANGED: DN all sizes are available in between DN0 LIFT TYPE CHECK VALVES CLV- Material GG- Cast Iron Cover GG- Cast Iron Disc Material AISI 304 Spring Material AISI 304 Gasket CrNi laminated pure graphite Connection Type Nominal Pressure (PN) 9,6 bar Max. Operating Temperature 100 C 300 C -FLANGED: DN all sizes are available in between DN300 WAFER TYPE DISCO CHECK VALVES CV-10 CV-10P CV-10S1 CV-10S2 Material Brass Ms58 AISI 304 AISI 316 Disc Material AISI 316 AISI 316 AISI 316 Centering Hoop AISI 302 AISI 302 AISI 302 Spring Material AISI 302 AISI 302 AISI 302 Connection Type Wafer Type Wafer Type Wafer Type Nominal Pressure (PN) bar bar Min. Allowable Temp. -10 C -10 C -10 C Max. Operating Temp. 0 C 300 C 300 C -DN all sizes are available in between DN100 STRAINERS PTY- Material Ductile Iron GGG Gasket Graphite+Acanthopore Plate Strainer AISI 304 Filter AISI 304 Connection Type Nominal Pressure (PN) 10 bar Max. Operating Temperature 1 C 300 C DN all sizes available in between DN0 FOR LIQUIDS STRAINER YS-800 Material AISI 304 AISI 316 Screen AISI 304 AISI 316 Cap AISI 304 AISI 316 Gasket PTFE PTFE Connection Type Nominal Pressure (PN) bar bar Max. Operating Temperature -/+180 C -/+180 C all sizes available in between

16 STEAM EQUIPMENT HEAD OFFICE - FACTORY Atatürk Sanayi Bölgesi Hadımköy Mahallesi Mustafa İnan Caddesi No: 44 Arnavutköy - İSTANBUL Tel: (pbx) Fax: info@ayvaz.com Cona Caserta/Italy Tel: rmolaro@ayvaz.com Ayvaz Russia Moscow/Russia Tel: ayvazrus@ayvaz.com Ayvaz Germany Viernheim/Germany Tel: germany@ayvaz.com Ayvaz Ukraine Kiev/Ukraine Tel: info@ayvaz.com.ua Tricorr Warsaw/Poland Tel: tricorr@tricorr.eu Haci Ayvaz M.E. Dubai/U.A.E Tel: mideast@ayvaz.com Ayvaz China Cixi City/China Tel: info@ayvazchina.com Ayvaz Kazakhstan LLP Almaty/Kazakhstan Tel: +7 (727) info_kz@ayvaz.com Ayvaz N Isperih/Bulgaria Tel: office@ayvaz-n.eu Ayvaz Serbia Belgrad/Serbia Tel: yakbiyik@ayvaz.com

PRODUCTS. Expansion Joints Fire Fighting. Flexible Metal Hoses. Equipments. Insulation Solutions. Steam. Valves. Level Control.

PRODUCTS. Expansion Joints Fire Fighting. Flexible Metal Hoses. Equipments. Insulation Solutions. Steam. Valves. Level Control. PRODUCTS Expansion Joints Fire Fighting Equipments Flexible Metal Hoses Steam Equipments Valves Level Control Insulation Solutions VALVES FLEXIBLE METAL HOSES EXPANSION JOINTS LEVEL CONTROL EQUIPMENTS