TECENICAL DATA. Model No. HSU-09HEA03/R2(DB)-I HSU-12HEA03/R2(DB)-I HSU-18HEA03/R2(DB)-I HSU-24HEA03/R2(DB)-I. Wall mounted Type. DC Inverter E-Series

Transcription

1 TECENICAL DATA Order No.AC0902T003V0 Wall mounted Type DC Inverter E-Series Model No. HSU-09HEA03/R2(DB)-I HSU-12HEA03/R2(DB)-I HSU-18HEA03/R2(DB)-I HSU-24HEA03/R2(DB)-I 9K 12K 18K 24K 09K 12K 18K WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death 24K 2008 (Qingdao Haier Air Conditioner General corp.,ltd) All right reserved.unauthorized copying and distribution is a violation of law Haier Group

2 Table of Contents Table of Contents 1. Features Specifications Remote controller lists Sensors lists Dimensional drawings Operation range Piping diagrams Wiring diagrams Performance curves diagrams Cooling capacity-temperature curves Heating capacity-temperature curves Cooling power consumption value curves Heating power consumption value curves Cooling discharge pressure cu rves Cooling suction pressure cu rves Heating discharge pressure curves Heating suction pressure curves Sound level Accessories Control systems Center of gravity Installations.. 59

3 Semi 1

4 2.Specifications This information was not available at the time of publication. HSU-09/12/18/24HEA03/R2(DB)-I Specifaications NOMINAL CAPACITY and NOMINAL INPUT For indoor units only: INDOOR UNITS HSU-09HEA03/R2(DB)-I HSU-12HEA03/R2(DB)-I NOMINAL Cooling nominal kw INPUT Heating nominal kw NOMINALCA PACITY and NOMINA L INPUT NORMINAL CAPACITY(3-4) NORMINAL INPUT EER COP ANNUAL ENERGY CONSUMPTION(9) Model Cooling(1) Heating(2) Cooling Heating Cooling Heating Cooling min.~norm.~max. min.~norm.~max. min.~norm.~max. min.~norm.~max. kw kw kw kw kwh HSU-09HEA03/R2(DB)-I HSU-12HEA03/R2(DB)-I 1.25~2.81~ ~3.72~ ~2.93~ ~3.9~ ~0.78~ ~1.1~ ~0.8~ ~1.14~ TECHNICAL SPECIFICATIONS INDOOR UNITS DIMENSIONS WEIGHT COLOR SOUND LEVEL FAN Unit Unit Unit Sound pressure (cooling/heating)(5) Sound power(cooling/heating)(6) Air flow rate(cooling/heating) Speed(cooling/heating) Type Motor output H W D high medium low high high low super low steps high medium low mm mm mm kg db(a) db(a) db(a) db(a) m 3/min m 3/min m 3/min rpm rpm rpm W 9K WHITE WHITE /9.6 10/ / / / /8.3 4 steps,silent and auto Cross flow fan 18 12K HEAT EXCHANGER Type Row x stage x fin pitch mm ML fin - 7HI - XA tube 2 x 14 x1.4 AIR FILTER Removable/washable/mildew proof REMOTE CONTROLLER YR-H04 TEMPERATURE CONTROL Microcomputer control PIPING CONNECTIONS(external diameter) liquid gas drain mm mm mm INSULATION MATERIAL Heat insulation type both liquid and gas pipes 2

5 Specifaications This information was not available at the time of publication. NOMINAL CAPACITY and NOMINAL INPUT For indoor units only: INDOOR UNITS HSU-18HEA03/R2(DB)-I HSU-24HEA03/R2(DB)-I NOMINAL Cooling nominal kw INPUT Heating nominal kw NOMINALCA PACITY and NOMINA L INPUT NORMINAL CAPACITY(3-4) NORMINAL INPUT EER COP ANNUAL ENERGY CONSUMPTION(9) Model Cooling(1) Heating(2) Cooling Heating Cooling Heating Cooling min.~norm.~max. min.~norm.~max. min.~norm.~max. min.~norm.~max. kw kw kw kw kwh HSU-18HEA03/R2(DB)-I HSU-24HEA03/R2(DB)-I 0.95~5.0~ ~7.34~ ~5.22~ ~7.62~ ~1.58~ ~2.3~ ~1.6~ ~2.32~ TECHNICAL SPECIFICATIONS INDOOR UNITS DIMENSIONS WEIGHT COLOR SOUND LEVEL FAN Unit Unit Unit Sound pressure (cooling/heating)(5) Sound power(cooling/heating)(6) Air flow rate(cooling/heating) Speed(cooling/heating) Type Motor output H W D high medium low high high low super low steps high medium low mm mm mm kg db(a) db(a) db(a) db(a) m 3/min m 3/min m 3/min rpm rpm rpm W 18K 24K WHITE WHITE / / / / / / steps,silent and auto Cross flow fan 40 HEAT EXCHANGER Type Row x stage x fin pitch mm ML fin - 7HI - XA tube 2 x 22 x1.4 AIR FILTER Removable/washable/mildew proof REMOTE CONTROLLER YR-H04 YR-H47 TEMPERATURE CONTROL Microcomputer control PIPING CONNECTIONS(external diameter) liquid gas drain mm mm mm INSULATION MATERIAL Heat insulation type both liquid and gas pipes 3

6 Specifaications TECHNICAL SPECIFICATIONS OUTDOOR UNITS NET DIMENSIONS (stop valve, and bottom support is not included) WEIGHT COLOR SOUND LEVEL Unit Unit Unit H W D Sound pressure(cooling/heating)(5) high Sound power(cooling/heating)(6) high mm mm mm kg db(a) db(a) 9K 12K white white Air flow rate(cooling/heating) high m 3/min 26.6 FAN Speed(cooling/heating) high rpm 800 Type Propeller fan Motor output W 19 Refrigerant type R410a REFRIGERANT CIRCUIT Refrigerant charge Maximum allowable distance between indoor and outdoo Maximum allowable level difference Refrigerant control kg m m capillary Type Rotary Compressor Model DA108X1C-20FZ3 COMPRESSOR Motor output w 855 Oil type ESTER OIL VG74 PIPING CONNECTIONS Oil charge volume liquid gas drain L mm mm mm INSULATION MATERIAL Heat insulation type both liquid and gas pipes ELECTRICAL SPECIFICATIONS For combination indoor units+ outdoor units: 9K 12K Nominal running current cooling heating A A Maximum cooling A CURRENT running current heating A Starting cooling A current heating A

7 Specifaications TECHNICAL SPECIFICATIONS OUTDOOR UNITS NET DIMENSIONS (stop valve, and bottom support is not included) WEIGHT COLOR SOUND LEVEL Unit Unit Unit H W D Sound pressure(cooling/heating)(5) high Sound power(cooling/heating)(6) high mm mm mm kg db(a) db(a) 18K 24K white white Air flow rate(cooling/heating) high m 3/min FAN Speed(cooling/heating) high rpm Type Propeller fan Motor output Refrigerant type W R410a REFRIGERANT CIRCUIT Refrigerant charge Maximum allowable distance between indoor and outdoo Maximum allowable level difference Refrigerant control kg m m electronic expansion valve Type Rotary Compressor Model 5CS130XCC03 5CS160XAA23 COMPRESSOR Motor output w Oil type RB68A or Freol Alpha 68M FV50S PIPING CONNECTIONS Oil charge volume liquid gas drain L mm mm mm INSULATION MATERIAL Heat insulation type both liquid and gas pipes ELECTRICAL SPECIFICATIONS For combination indoor units+ outdoor units: 18K 24K Nominal running current cooling heating A A Maximum cooling A CURRENT running current heating A Starting cooling A current heating A

8 Specifaications HSU-09/12/18/24HEA03/R2(DB)-I 6

9 Remote controller and sensor Model YR-H04 YR-H47 HSU-09/12/18HEA03/R2(DB)-I Y N HSU-24HEA03/R2(DB)-I N Y 7

10 5 dimensional drawings Indoor unit Dimentional drawings HSU-09HEA03/R2(DB)-I HSU- /18HEA03/R2(DB)-I

11 Dimentional drawings HSU-24HEA03/R2(DB)-I

12 682 HSU-09/12/18/24HEA03/R2(DB)-I Dimentional drawings Outdoor unit HSU-09/12HEA03/R2(DB) w ay valve 6.35mm(1/4") 3-w ay valve 9.52mm(3/8") HSU-18HEA03/R2(DB)-I

13 Dimentional drawings HSU-24HEA03/R2(DB)-I way valve 9.52mm(3/8") 3-way valve 15.88mm(5/8") 11

14 . HSU09/12/18HEA03/R2(DB)-I Operation range Cooling Outdoortemp. DB pull down indoor temp WB Heating 15 WB outdoor temp Notes indoor temp DB The graphs are based on the following condition Equivalent piping length 7.5m Level difference 0m Air flow rate high 12

15 HSU09/12/18HEA03/R2(DB)-I 13

16 8 Wiring diagrams HSU-09/12/18/24HEA03/R2(DB)-I Wring Diagramme HSU-09/12HEA03/R2(DB)-I Indoor unit INDOOR WIRING DIAGRAM transformer R W ion generator fan motor FUSE singal receiver board emergency switch Ambient temp.sensor Piping temp.sensor louver motor TO OUTDOOR UNIT B Black R Red BR Brown BL blue W White Y/G Yellow/Green Outdoor unit WARNING CAUTION DON'T TOUCH CAPACITOR, EVEN AFTER PLUG-OFF ( DANGER OF ELECTRIC SHOCK) The capacitor retains high voltage even after the plug-off. For your safety, be sure to wait at least 5 minutes. after plug off and use a tester to confirm the voltage between connector P DC FAN MOTOR and N(on module board) is less than DC 10V before start servicing. DEFROST TEMP.SENSOR AMBIENT TEMP.SENSOR SUCTION TEMP.SENSOR COMPRESSOR DISCHARGE TEMP.SENSOR CN21 CN20 OUTDOOR WIRING DIAGRAM CN19 CN18 CN25 CN3 CN23 CN24 CN4 CN15 CAPACITOR CN13 CN14 MODULE BOARD CN5CN6 AC-NAC-L T25A/250VAC CN29 FUSE1 SOCKET PROTECT AC- N CN9 CN8 AC-L L0(CN6) W LI (CN7) W CN10 CN11 TERMINAL BLOCK PFC REACTOR POWER to double-way air exchange motor UNIT IN D O O R TO to single-way air exchange motor Remark thedottedpartsare optional for different unit. ELECTRIC EXPANSION VALVE AC FAN MOTOR 4-WAY VALVE B BLACK OR ORANGE W WHITE BR BROWN R RED Y/G YELLOW/GREEN BL BLUE 14

17 FUSE1 HSU-09/12/18/24HEA03/R2(DB)-I Wring Diagramme HSU-18HEA03/R2(DB)-I Indoor unit INDOOR UNIT WIRING DIAGRAM RECEIVER DISPLAY EMERGENCY SWITCH TEMP.SENSOR AMBIENT TEMP.SENSOR PIPING LOUVER MOTOR CN6 CN8 CN9 ION GENERATOR CN601 Y/G R W CN1 CON2 CON1 CON3 B CN3 CON605 CON5 CON606 CON607 FUSE T3.15A/250V AC R R B R B CON001 CON002 CON003 CON004 CON005 CN001 R Y/G CN4 W Y/G TO OUTDOOR UNIT B BLACK R RED W WHITE Y/G YELLOW/GREEN BL BLUE Outdoor unit WARNING CAUTION DON'T TOUCH CAPACITOR, EVEN AFTER PLUG-OFF ( DANGER OF ELECTRIC SHOCK) The capacitor retains high voltage even after the plug-off. For your safety, be sure to wait at least 5 minutes. after plug off and use a tester to confirm the voltage between connector P and N is less than DC 10V before start servicing. DEFROST TEMP.SENSOR AMBIENT TEMP.SENSOR SUCTION.TEMP.SENSOR COMP.TEMP.SENSOR NOTES: THE DOTTED PARTS ARE OPTIONAL OUTDOOR UNIT WIRING DIAGRAM CN21 CN20 CN19 CN18 CN25 CN15 DC FAN MOTOR CN22 CN11 COMPRESSOR R W B OUTDOOR PCB SOCKET CN29 PROTECT CN1 CN3 CN2 CAP BOARD CN4 BL OR Y/G CN23 CN24 CN4 CN3 CN13 CN14 CN9 CN6 ELECTRIC AC FAN MOTOR EXPANSION VALVE 4-WAY VALVE W V U CN11 CN10 CN5 T2 5A/ 250VAC OR BL CN2 CN LI MODULE BOARD (CN3) W AC-L(CN1) AC-N(CN2) LO(CN4) W P N W R B W TE RMINA L BL OK C Y/G Y/G Double-way air exchange MOTOR Single-way air exchange MOTOR R B W REACTOR TO INDOOR UNIT PO WE R BLACK RED OR ORANGE BL BLUE WHITE Y/ ELLOW /GREEN 15

18 FLITER HSU-09/12/18/24HEA03/R2(DB)-I Wring Diagramme HSU-24HEA03/R2(DB)-I Indoor unit INDOOR UNIT DIAGRAM ANION GENERATOR Y/G FAN MOTOR EMERGENCY SWITCH BRUSH LEFT STEP MOTOR RIGHT STEP MOTOR AMBIENT TEMP.SENSOR PIPING TEMP.SENSOR CN2 CN11 CN7 CN6 CN10 C0N7 C0N6 C0N4 C0N5 CON3 CN5 CN8 UP STEP MOTOR 120 T3.15A/250VAC FUSE1 CON1(CON8) CON2 CN3 INTEGRATED CONTROLLER DOWN STEP MOTOR CN12 DISPLAY RECEIVER BOARD TO OUTDOOR DC MOTOR BR BL UV LAMP Outdoor unit TO OUTDOOR UNIT POWER SUPPLY NOTES: THE PARTS OF DOTTED ARE OPTIONAL 80 W: WHITE B: BLACK R: RED BL: BLUE BR: BROWN Y/G: YELLOW /GREEN WARNING CAUTION DON'T TOUCH CAPACITOR, EVEN AFTER PLUG-OFF ( DANGER OF ELECTRIC SHOCK) The capacitor retains high voltage even after the plug-off. For your safety, be sure to wait at least 5 minutes. after plug off and use a tester to confirm the voltage between connector P and N is less than DC 10V before start servicing. OUTDOOR UNIT WIRING DIAGRAM COMPRESSOR CN11 CN10 MODULE BOARD CAP BOARD LI (CN3) AC-L (CN1) AC-N (CN2) P512 LO (CN4) W W FUSE T25A/250VAC REACTOR TERMINAL BLOCK POWER SUPPLY DEFROST TEMP.SENSOR AMBIENT TEMP.SENSOR SUCTION.TEMP.SENSOR COMP.TEMP.SENSOR NOTES: THE PARTS OF DOTTED ARE OPTIONAL OUTDOOR PCB ELECTRIC EXPANSION VALVE DC FAN MOTOR AC FAN MOTOR 4-WAY VALVE R Double-way air exchange MOTOR Single-way air exchange MOTOR TO INDOOR B BLACK R RED OR ORANGE BL BLUE W WHITE Y/G YELLOW /GREEN 16

19 Capacity 9 Performance Curves Diagram 9.1 cooling capacity-temp. curves HSU-09HEA03/R2(DB)-I performance curves cooling value-temerature talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / / 12 18/ 14 20/ 15 22/ 16 25/ 18 27/ 19 30/ 22 32/ 23 32/ C 20 C 25 C 32 C 35 C 40 C 43 C 46 C 17

20 Capacity HSU- 12HEA03/R2(DB)-Iperformance curves cooling value-temerature talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / / 12 18/ 14 20/ 15 22/ 16 25/ 18 27/ 19 30/ 22 32/ 23 32/ C 20 C 25 C 32 C 35 C 40 C 43 C 46 C 18

21 Capacity HSU-18HEA03/R2(DB)-I performance curves cooling capacity and indoor/outdoor temp. talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / cooling value-temp. curves 6000 cooling capacity C 20 C 25 C 32 C 40 C 43 C 46 C /12 18/14 20/15 22/16 25/18 27/19 30/22 32/23 32/24 indoor temp. 19

22 Capacity HSU-22HEA03/R2(DB)-I performance curves cooling capacity and indoor/outdoor temp. talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / cooling value-temp. curves cooling capacity C 20 C 25 C 32 C 40 C 43 C 46 C /12 18/14 20/15 22/16 25/18 27/19 30/22 32/23 32/24 indoor temp. 20

23 Capacity 9.2 heating capacity-temp.curves HSU- 09HEA03/R2(DB)-I performance curves heating capacity and indoor/outdoor temp.curves outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / heating capacity and indoor/outdoor temp. cu rves 15 C 20 C 25 C conoling capacity(w) indoor tempe. (DB/ WB) 21

24 Capacity HSU-12HEA03/R2(SDB)-I performance curves heating capacity and indoor/outdoor temp.curves outdoor temp. DB/ WB 15 indoor temp.(humidity 46%) / heati ng capacity and indoor / out door temp. cur ves 15 C 20 C 25 C conoling capacity(w) indoor tempe.( DB/WB) 22

25 Capacity HSU-18HEA03/R2(DB)-I performance curves heating capacity and indoor/outdoor temp.curves outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / heating capacity and inddor/outdoor temp. curves heating capacity / outdoor temp 23

26 Capacity HSU-22HEA03/R2(DB) performance curves heating capacity and indoor/outdoor temp.curves outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / heating capacity and inddor/outdoor temp. curves heating capacity / outdoor temp 24

27 Capacity 9.3 Cooling power consumption-temp.curves HSU-09HEA03/R2(DB)-Iperformance curves power consumption value-teme.talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / power consumption- temp.curves 1100 power consumption(w) / 12 18/ 14 20/ 15 22/ 16 25/ 18 27/ 19 30/ 22 32/ 23 32/ 24 i ndoor tempe. (DB/ WB) 21 25

28 Capacity HSU-12HEA03/R2(DB)-I performance curves power consumption value-teme.talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / power consumption-temp.curves power consumption(w) / 12 18/ 14 20/ 15 22/ 16 25/ 18 27/ 19 30/ 22 32/ 23 32/ 24 i ndoor t empe. ( DB/ WB) 26

29 Capacity HSU-18HEA03/R2(DB)-I performance curves power consumption value-teme.talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / power consumption-temp. curves 2200 power consumption /12 18/14 20/15 22/16 25/18 27/19 30/22 32/23 32/24 indoor temp 27

30 Capacity HSU-24HEA03/R2(DB)-I performance curves power consumption value-teme.talbe indoor temp. outdoor temp.(humidity 46%) DB/WB / / / / / / / / / power consumption-temp. curves power consumption /12 18/14 20/15 22/16 25/18 27/19 30/22 32/23 32/24 indoor temp 28

31 Capacity 9.4 heating power consumption-temp.curves HSU-09HEA03/R2(DB)-Iperformance curves power consumption value-temp.talbe outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / heat ing capaci t y and indoor / outdoor temp. cur ves conoling capacity(w) / i ndoor tempe. ( DB/ WB) 29

32 Capacity HSU-12HEA03/R2(DB)-I performance curves power consumption value-temp.talbe outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / heat i ng capaci t y and i ndoor / out door t emp. cur ves conoling capacity(w) / i ndoor tempe. (DB/WB) 30

33 Capacity HSU-18HEA03/R2(DB)-I performance curves power consumption value-temp.talbe outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / / power consumption value-temp.table 2500 power consumption /1 7/ outdoor temp. 31

34 Capacity HSU-24HEA03/R2(DB)-I performance curves power consumption value-temp.talbe outdoor temp. DB/WB 15 indoor temp.(humidity 46%) / / power consumption value-temp.table 3000 power consumption /1 7/ outdoor temp. 32

35 9.5 Cooling discharge pressure HSU-09/12/18/24HEA03/R2(DB)-I Capacity HSU-09HEA03/R2(DB)-I performance curves COOLING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 33

36 Capacity HSU-12HEA03/R2(DB)-I performance curves COOLING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 34

37 Capacity HSU-18HEA03/R2(DB)-I performance curves COOLING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 35

38 Capacity HSU-24HEA03/R2(DB)-I performance curves COOLING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 36

39 Capacity 9.6 cooling suction pressure curves HSU-09HEA03/R2(DB)-I performance curves COOLING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING SUCTION PRESSURE DISCHARGE PRESSURE Outdoor Temp 37

40 Capacity HSU-12HEA03/R2(DB)-I performance curves COOLING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp COOLING SUCTION PRESSURE DISCHARGE PRESSURE Outdoor Temp 38

41 Capacity HSU-18HEA03/R2(DB)-I performance curves COOLING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp cooling sunction pressure table cooling sunction pressure outdoor temp

42 Capacity HSU-24HEA03/R2(DB) performance curves COOLING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 16 indoor temp cooling sunction pressure table cooling sunction pressure outdoor temp

43 Capacity 9.7 heating discharge pressure curves HSU-09HEA03/R2(DB)-Iperformance curves HEATING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp HEATING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 41

44 Capacity HSU-12HEA03/R2(DB)-I performance curves HEATING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp HEATING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 42

45 Capacity HSU-18HEA03/R2(DB)-I performance curves HEATING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp HEATING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 43

46 Capacity HSU-24HEA03/R2(DB) performance curves HEATING DISCHARGE PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp HEATING DISCHARGE PRESSURE DISCHARGE PRESSURE Outdoor Temp 44

47 Capacity 9.8 heating suction pressure curves HSU-09HEA03/R2(DB)-I performance curves HEATING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp DISCHARGE PRESSURE HEATING SUCTION PRESSURE Outdoor Temp

48 Capacity HSU-12HEA03/R2(DB)-Iperformance curves HEATING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp DISCHARGE PRESSURE HEATING SUCTION PRESSURE Outdoor Temp

49 Capacity HSU-18HEA03/R2(DB)-I performance curves HEATING SUCTION PRESSURE.talbe outdoor temp. (humidity 46%) DB/WB 15 indoor temp DISCHARGE PRESSURE HEATING SUCTION PRESSURE Outdoor Temp 47

50 10 Sound level HSU-09/12/18/24HEA03/R2(DB)-I Sound presure level Sound level Model 230V,50Hz Cooling/heating H L SL Measuring location Location of microphone sound power level (cooling/heating) HSU-09HEA03/R2(DB)-I cooling heating NC NC NC NC NC NC NC NC NC NC approximate threshold hearing for continuous noise NC Octave band center frequency(hz) 20 approximate threshold hearing for continuous noise NC Octave band center frequency(hz) 48

51 Sound level Sound presure level Model 230V,50Hz Cooling/heating H L SL Measuring location Location of microphone sound power level (cooling/heating) HSU-12HEA03/R2(DB)-I cooling heating NC NC NC NC NC NC NC NC NC NC approximate threshold hearing for continuous noise NC Octave band center frequency(hz) 20 approximate threshold hearing for continuous noise NC Octave band center frequency(hz) 49

52 Sound level Sound presure level Model 230V,50Hz Cooling/heating Measuring location Location of microphone sound power level (cooling/heating) H L SL HSU-18HEA03/R2(DB)-I cooling heating NC NC NC NC NC NC NC NC NC NC approximate threshold hearing for continuous noise NC approximate threshold hearing for continuous noise NC Octave band center frequency(hz) Octave band center frequency(hz) 50

53 Sound level Sound presure level Model 230V,50Hz Cooling/heating Measuring location Location of microphone sound power level (cooling/heating) H L SL HSU-24HEA03/R2(DB) 47/47 45/45 40/40 61/61 heating cooling heating NC NC NC NC NC NC NC NC NC NC approximate threshold hearing for continuous noise NC approximate threshold hearing for continuous noise NC Octave band center frequency(hz) Octave band center frequency(hz) 51

54 /24 52

55 12 Control systems For HSU-09,12,18HEA03/R2(DB)-I HSU-09/12/18/24HEA03/R2(DB)-I Control systems TIMER ON display 11. FAN SPEED display LOW MED HI 12. LOCK display 13. SWING UP/DOWN display 14. SLEEP display 15. HEALTH display 16. Operation mode display AUTO 28 Operation mode AUTO COOL DRY HEAT FAN Remote controller Display board 1.RESET When the remote controller appears abnormal, use a sharp pointed article to press this button to reset the remote controller normal. 2.LIGHT button Control the lightening and extinguishing of the indoor LED display board. 3. TIMER button Used to select TIMER ON, TIMER OFF, TIMER ON-OFF. 4. CLOCK button Used to set correct time. 5. SLEEP button Used to select sleep mode. 6. MODE button AUTO COOL DRY FAN HEAT 7. HOUR button Used to set clock and timer setting. 8. HEALTH button Used to set healthy operation. 9. ON/OFF button Used for unit start and stop Singal sending display 18. POWER/SOFT display 19. Left/right air flow display 20. TEMP display Remote controller: to display the TEMP. setting. 21. TIMER OFF display 22. TIMER display 23. TEMP button Used to select your desired temperature. 24. FAN button Used to select fan speed: LOW,MED, HI, AUTO. 25. HEALTH AIRFLOW button Used to set the health airflow mode. 26. SWING UP/DOWN button Used to select up or down air sending direction. 27. SWING LEFT/RIGHT button Used to select left/right air flow. 28. SET button Used to confirm timer and clock settings. 29. POWER/SOFT button Every time the button is pressed,display changes as follows: BLANK POWER SOFT 30. LOCK Used to lock buttons and LCD display. If pressed, the other buttons will be disabled and the lock condition display appears. Press it once again, lock will be canceled and lock condition display disappears. 31. Singal receiver hole 32. Ambient temp.display When receiving the remote control signal, display the set temperature and in the rest time the room temperature is displayed and this room temperature is only for reference. NOTE:(1) The following functions and related displays are not available: 53

56 Control systems For HSU-24HEA03/R2(DB)-I ON/OFF button Used for unit start and stop. 11. TIMER ON display 12. FAN SPEED display LOW MED HI AUTO POWER/SOFT LOCK display 14. SWING UP/DOWN display 15. SLEEP display 16. HEALTH display 17. Operation mode display 30 Operation mode AUTO COOL DRY FAN Remote controller HEAT 1.CODE Used to select CODE A or B with a press,a or B will be displayed on LCD. Please select A without special explanation. 2.RESET When the remote controller appears abnormal, use a sharp pointed article to press this button to reset the remote controller normal. 3.LIGHT button Control the lightening and extinguishing of the indoor LED display board. 4. TIMER button Used to select TIMER ON, TIMER OFF, TIMER ON-OFF. 5. CLOCK button Used to set correct time. 6. HEALTH button Used to set healthy operation. 7. MODE button AUTO COOL DRY FAN HEAT 8. HOUR button Used to set clock and timer setting. 9. SWING button Used to select up or down air sending direction. 18.Singal sending display 19. POWER/SOFT display 20. Left/right air flow display 21. TEMP display Remote controller: to display the TEMP. setting. 22. TIMER OFF display 23. CLOCK display 24. TEMP button Used to select your desired temperature. 25. FAN button Used to select fan speed: LOW,MED, HI, AUTO. 26. HEALTH AIRFLOW button Used to set the health airflow mode. 27. SLEEP button Used to select sleep mode. 28. SET button Used to confirm timer and clock settings. 29. POWER/SOFT button Use to set power/soft function. 30. LOCK Used to lock buttons and LCD display. If pressed, the other buttons will be disabled and the lock condition display appears. Press it once again, lock will be cancelled and lock condition display disappears. NOTE: The following functions and related displays are not available:

57 13 Center of gravity HSU-09/12/18/24HEA03/R2(DB)-I HSU-09HEA03/R2(DB)-I Indoor unit Center of gravity Outdoor unit 55

58 Center of gravity HSU-12HEA03/R2(DB)-I Indoor unit Outdoor unit 56

59 Center of gravity HSU-18HEA03/R2(DB)-I Indoor unit Outdoor unit

60 Center of gravity HSU-24HEA03/R2(DB)-I

61 5

62 HSU09/12/18HEA03/R2(DB)-I Installation Outdoor Model 09/12K 18K 24K Max.allowable length 15m 25m 25m Max.allowable height 10m 15m 15m Additional refrigerant required for refrigerant pipe exceeding 7m in length 20g/m 20g/m 50g/m Arrangement of piping directions Gas pipe Liquid pipe O.D O.D O.D O.D O.D O.D Left Rear left Rear right *Be sure to add the proper amount of additional refrigerant. Failure to do so may result in reduced performance. Below Right Wrap the installation pipe with the finishing tape from bottom to top Model 25 / 35 class or tmh e ore than m 10cm n 10cm a Service lid How to remove the service lid. This service lid is an open/close type. Slide the lid downward to remove it. How to attach the service lid. Insert the upper part of the service lid into the outdoor unit to install. Tighten the screws. Where there is a danger of the unit falling, use foot bolts, or wires K 12K 18K 24K Fix the unit to concrete or block with bolts( 10mm) and nuts irmly and horizontall When fitting the unit to wall surface, roof or rooftop, fix as upporter surely with nails or wires in consideration of earthquake and strong wind. The distance between the indoor unit and the floor should be no more than 2m If vibration may affect the house, fix the unit by attaching a vibration-proof mat.

63 The end Sincere Forever Haier Group Chen Huimin Fan Shuangyuan Sun Qiang Yang Bifei 60 W Hongjin