The Traffic and Travel Information (TTI) Chain and Integration With Co-operative Systems

Size: px
Start display at page:

Download "The Traffic and Travel Information (TTI) Chain and Integration With Co-operative Systems"

Transcription

1 The Traffic and Travel Information (TTI) Chain and Integration With Co-operative Systems Dr Jonathan Harrod Booth 10 February 2011

2 Policy Context TTI features significantly in the ITS Action Plan, the ITS Directive and the CEN-ETSI response to Mandate M/453 on Co-operative Systems Standardization ITS Action Plan 1.1 Definition of procedures for the provision of EU-wide real-time traffic and travel information services 1.4 Definition of specifications for data and procedures for the free provision of minimum universal traffic information services 2.1 Definition of a set of common procedures and specifications to ensure the continuity of ITS services for passenger and freight in transport corridors and in urban/interurban regions. This work should include information flows traffic management 2

3 Policy Context ITS Directive Priority area I: Optimal use of road, traffic and travel data Specifications for priority action (a)- to make EU-wide multimodal travel information services accurate and available across borders to ITS users Specifications for priority action (b)- to make EU-wide real-time traffic information services accurate and available across borders to ITS users Specifications for priority action (c)-the definition of minimum requirements, for road safety related universal traffic information provided, where possible, free of charge to all users, as well as their minimum content Standardisation Work Areas: (Applications) Event Driven Road Hazard Warning (V2I, I2I, V2V) Traffic Management (V2I, I2I, V2V) Cooperative Traveller Assistance (V2I, I2I, V2V) CEN-ETSI ETSI Response to Mandate M/453 3

4 Example TTI Service Chain Traffic and Travel Information Standards & Co-operative Systems TPEG Co-operative Systems Traffic and Travel Information Standards

5 Challenges for Coherence / Consistent Conversion Necessity to ensure that there is a good alignment or known relationship between these different standard terminologies DATEX II TPEG Co-operative Systems Applications Standards

6 RDS-TMC DATEX (I) Development Path Flavours In the early 1990s there was a vision of a wholly aligned TPEG -stack Binary of exchange protocols for TPEG different -XML bearers and TPEG 2 bandwidths, but the development DATEX-ASN US / ISO DATEX (II) Europe }Over Air Broadcast 1990 s 2000 s 2010 s resources & communities of interest diverged as protocols CAMbecame specialised for intended purposes DENM Cooperative }Systems DATEX I had a complex defined mapping to ALERT-C but this has disappeared }Fixed centre to centre exchange

7 DATEX II TPEG Alignment Joint development of: TISA (TPEG developers) EasyWay (DATEX II developers) CEN/TC 278 Working Group 8 (DATEX II standardiser) CEN/TC 278 WG 4 and ISO/TC 204 WG10 (TPEG standardiser) Initial discussion in Summer 2010 Shared agreement that alignment is important in a European context, especially considering the development of cooperative systems 7

8 DATEX II TPEG Alignment -Approach Establishment of an MoU between EasyWay and TISA Focus DATEX II => TPEG exchange Adoption of practicalapproach looking at small discrete parts first -as both specifications are rich, large & complex, but with the intention to extend if successful Planned demonstrator at ITS Europe Congress in Lyon, 6-9 June 8

9 Impact on Standards Challenges for Standardisation Different stages of development of DATEX II, TPEG and ALERT C, plus CAM & DENM but all have reached some degree of maturity Different communities of interest With different requirements of granularity of information Ties into several Standards development communities ISO/TC204 WG10 & CEN/TC278 WG4, CEN/TC278 WG8, ETSI TC ITS WG1 Impact of alignment work may require some level of rework over time, or definition of standardised mappings 9

10 Final Thoughts We need to think and act holistically and collaboratively Establishing a single common data dictionary/registry for all these standards, and others, is an essential tool With good will, we can do it! But this is just one area requiring alignment Location Referencing methods are complex and becoming increasingly so 10

11 Dr Jonathan Harrod Booth Thank you 11

Standards for ITS, the perspective of CEN/TC278

Standards for ITS, the perspective of CEN/TC278 Standards for ITS, the perspective of CEN/TC278 Henk Stoelhorst Chairman CEN/TC278 10 FEB 2010 Presentation content ITS standards Why do we need ITS standards The standards bodies CEN/TC278: ITS standards

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18234-11 February 2013 ICS 03.220.01; 35.240.60 English Version Intelligent transport systems - Traffic and Travel Information

More information

Security Standardisation - Mandate M/487 Jolien van Zetten

Security Standardisation - Mandate M/487 Jolien van Zetten Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation

More information

BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards

More information

CEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)

CEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2) Introduction to EN 81-20/50 (revision of EN 81-1/2) CEN/TC 10: August 6 th, 2014 CEN/TC 10 Work Program CEN/TC 10 Structure European Standardization for Lifts, Escalators and Moving Walks 3 CEN/TC 10 Work

More information

BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated

More information

CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for

CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities

More information

BUSINESS PLAN CEN/TC 249 PLASTICS

BUSINESS PLAN CEN/TC 249 PLASTICS Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or

More information

BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization

More information

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,

More information

ISO/IEC and CEN standardization activities + buildingsmart

ISO/IEC and CEN standardization activities + buildingsmart ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development

More information

Interoperability from the perspective of standards

Interoperability from the perspective of standards Interoperability from the perspective of standards Alina IATAN CEN and CENELEC General considerations about European Standrads CEN and CENELEC 2018 2 Facts and figures about CEN and CENELEC 465 CEN/CLC

More information

BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately

More information

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the

More information

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation

More information

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442 CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin

More information

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305

More information

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in

More information

CEN/TC 391 Business Plan Revision Nov 2010 Page 1 EXECUTIVE SUMMARY

CEN/TC 391 Business Plan Revision Nov 2010 Page 1 EXECUTIVE SUMMARY Page 1 EXECUTIVE SUMMARY Business Environment A wide range of threats and hazards can result in destabilising or disruptive events and escalate towards unpredictable and large scale consequences for Societal

More information

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe

More information

CEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

CEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442 CEN/TC 442 Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS 2017-12-08 ØIVIND ROOTH, CHAIR CEN/TC442 11.12.2017 2 What is BIM? BIM - Building Information Modelling Is an industry

More information

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What

More information

BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment

More information

BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY The term Geosynthetics includes the product categories of (1) geotextiles and geotextile related products and (2) geosynthetic barriers,

More information

BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT Business environment EXECUTIVE SUMMARY The following European Council New Approach directive and regulation are relevant to the work

More information

Particle Tracking Analysis for particle counting

Particle Tracking Analysis for particle counting Particle Tracking Analysis for particle counting Dr Chairman of ISO TC229 (Nanotechnologies) Director of BREC Solutions ltd RSC Workshop (London,. UK) 24 April 2018 1 Introducing myself Expert duties Chair

More information

BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works

More information

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the

More information

Technical standards to support the evolution of technology enabled care services

Technical standards to support the evolution of technology enabled care services Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical

More information

EU Standardization & EU Service Standardization

EU Standardization & EU Service Standardization EU Standardization & EU Service Standardization Dr. Betty Xu Seconded European Standardization Expert in China (SESEC) 7 th Sept 2015 EU Standardization & EU Service Standardization Content Table 1. SESEC

More information

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue

More information

WORK PACKAGE 4 DELIVERABLE D.T4.1.4

WORK PACKAGE 4 DELIVERABLE D.T4.1.4 WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report

More information

BUSINESS PLAN. CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY

BUSINESS PLAN. CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 388 Perimeter Protection Products and Systems EXECUTIVE SUMMARY Business Environment Protection of people and property in a society that is confronted with criminal and terrorist dangers

More information

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial

More information

BUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY

BUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous

More information

BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines

More information

Behind the scenes of ISO 22301

Behind the scenes of ISO 22301 Behind the scenes of ISO 22301 Stefan Tangen Secretary of ISO/TC 223 Societal security So how does standardization work in practice? Example on cargo security SWEDEN 2001 Safe Swedish rules Stakeholders

More information

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1). BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity

More information

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA WG IV/ Saved: 13 October 2003 N03-08 Page 1 of 5 CEN/TC 251 WG IV HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA TITLE/ SUBJECT: SOURCE: WGIV and ISO TC215 WG2.1 (devices)

More information

BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY Business Environment The European plastics and rubber machinery industry represented in 2015 a total of around 1,000 companies,

More information

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the

More information

European Standards: Supporting the European Single Market for Services

European Standards: Supporting the European Single Market for Services 2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,

More information

Business Plan CEN/TC 172 PULP, PAPER AND BOARD

Business Plan CEN/TC 172 PULP, PAPER AND BOARD Page: 1 Business Plan CEN/TC 172 PULP, PAPER AND BOARD Introduction CEN Technical Committees and Business Planning The extension of formal business planning to CEN Technical Committees (CEN/TCs) is an

More information

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,

More information

A holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved.

A holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved. Stephan Griebel, Siemens AG, Braunschweig A holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved. Overview 1. Introduction

More information

BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing

More information

The European Standardization System. Diana Dus Programme Manager International Cooperation

The European Standardization System. Diana Dus Programme Manager International Cooperation The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European

More information

BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS CEN/TC 191 Business Plan Date: 2005-09-07 Version: 2 Approved BP Page: 1 EXECUTIVE SUMMARY Business Environment TC191 is responsible for standardization

More information

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop

More information

Opportunities in the DG JRC Enlargement and Integration Action

Opportunities in the DG JRC Enlargement and Integration Action Opportunities in the DG JRC Enlargement and Integration Action Dr. Ole-Peter Ostermann, DG JRC, Enlargement and Associated Initiatives The Use of the Eurocodes in the Mediterranean Countries Varese 27

More information

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the

More information

CEN strategies and plans for a global acceptance of the Eurocodes

CEN strategies and plans for a global acceptance of the Eurocodes CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation

More information

BSI the UK voice into European and national standards

BSI the UK voice into European and national standards BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards

More information

Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities

Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities IoT for Smart Cities and Communities Bilbao (2018-06-06) CEN and CENELEC 1 Who we are & Where do we fit in International

More information

English Version. This Technical Specification (CEN/TS) was approved by CEN on 9 April 2007 for provisional application.

English Version. This Technical Specification (CEN/TS) was approved by CEN on 9 April 2007 for provisional application. TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 14823 July 2008 ICS 43.040.15; 35.240.60 English Version Traffic and travel information - Messages via media independent

More information

1. Terms defined in the Construction Products Regulation (CPR)

1. Terms defined in the Construction Products Regulation (CPR) CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction

More information

International and European standardization of Nanomaterials

International and European standardization of Nanomaterials International and European standardization of Nanomaterials Jean-Marc Aublant LNE - France What about standardization of nanotechnologies? Retrospect CEN/BT/WG 166 Nanotechnologies was established in March

More information

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee

More information

GI Standardization Overview

GI Standardization Overview Second workshop on the use of GIS/OGC standards in meteorology GI Standardization Overview 1 nicolas.lesage@ign.fr 12 Janvier 2009 Modèle TN-02.018-1.1 The goal of standardization According to decree number

More information

Eress Forum 2018 Workshop 2: The Future of Energy Metering Data. Data security basics

Eress Forum 2018 Workshop 2: The Future of Energy Metering Data. Data security basics Eress Forum 2018 Workshop 2: The Future of Energy Metering Data Data security basics Standardisation Regulation IEC TC65 IEC 62443-x-x is a horizontal standard Railway Perspective - Overview related committees

More information

The future of the CPR, is CE marking changing? 26/10/2018

The future of the CPR, is CE marking changing? 26/10/2018 < The future of the CPR, is CE marking changing? 26/10/2018 Starting at the very beginning European Union 1989 Construction Products Directive CE marking for construction concept Fit for purpose European

More information

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

More information

Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations

Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)

More information

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

A Notification under Article 12 of Regulation (EU) No 1025/2012 1 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation

More information

BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des

More information

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9311-3 First edition 2005-03-01 Adhesives for thermoplastic piping systems Part 3: Test method for the determination of resistance to internal pressure Adhésifs pour systèmes

More information

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management

More information

Standards and Standardisation. An Overview

Standards and Standardisation. An Overview Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing

More information

The European Radio Equipment Directive 2014/53/EU

The European Radio Equipment Directive 2014/53/EU TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing

More information

European Standardization for the Natural Gas Infrastructure

European Standardization for the Natural Gas Infrastructure European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009 Content The standards framework Benefits

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles

More information

COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX. on the European Rail Traffic Management System European deployment plan

COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX. on the European Rail Traffic Management System European deployment plan EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX on the European Rail Traffic Management System European deployment plan EN EN COMMISSION IMPLEMENTING

More information

BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY 1. BUSINESS ENVIRONMENT OF THE CEN/TC 132 It may be hard to believe but only 150 years ago aluminium was considered to be

More information

ISO/TS TECHNICAL SPECIFICATION

ISO/TS TECHNICAL SPECIFICATION Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance

More information

Does your equipment meet your needs and the operational capacity stated by the manufacturer?

Does your equipment meet your needs and the operational capacity stated by the manufacturer? Does your equipment meet your needs and the operational capacity stated by the manufacturer? Richard Bancroft, B.Sc (Hons) Registered Authorising Engineer (Decontamination), UK Convenor, ISO/TC 198 WG

More information

BUSINESS PLAN CEN/TC 337. Road operation equipment and products

BUSINESS PLAN CEN/TC 337. Road operation equipment and products Page: 1 BUSINESS PLAN CEN/TC 337 Road operation equipment and products EXECUTIVE SUMMARY The main objective of the Technical Committee, CEN/TC 337 founded in 2000 is to prepare European standards on all

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9311-2 Second edition 2011-08-15 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Adhésifs pour réseaux de tuyauteries

More information

BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements

More information

CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)

CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004) ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY

More information

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l

More information

Role of Standards in Exploiting Technology and Research

Role of Standards in Exploiting Technology and Research Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for

More information

A new model for CEN/TC 89 Thermal performance of buildings and building components

A new model for CEN/TC 89 Thermal performance of buildings and building components Project CEN M/48 phase 2, Revision standards for EPBD CEN/TC 89 and ISO/TC 163/SC 2 Energy and thermal performance of building and building components CEN standards for the energy performance of buildings.

More information

ISO INTERNATIONAL STANDARD. Building automation and control systems (BACS) Part 2: Hardware

ISO INTERNATIONAL STANDARD. Building automation and control systems (BACS) Part 2: Hardware INTERNATIONAL STANDARD ISO 16484-2 First edition 2004-08-01 Building automation and control systems (BACS) Part 2: Hardware Systèmes de gestion technique du bâtiment Partie 2: Équipement Reference number

More information

CEN TC224 esign activities ETSI Security workshop 2013/01/16. Beatrice PEIRANI, GEMALTO Expert ETSI STF 425, CEN WG16

CEN TC224 esign activities ETSI Security workshop 2013/01/16. Beatrice PEIRANI, GEMALTO Expert ETSI STF 425, CEN WG16 CEN TC224 esign activities ETSI Security workshop 2013/01/16 Beatrice PEIRANI, GEMALTO Expert ETSI STF 425, CEN WG16 Agenda Introduction EU Mandate M/460 EU regulation on electronic trust services CEN

More information

National Research Infrastructure Roadmapping in Europe

National Research Infrastructure Roadmapping in Europe www.inroad.eu info@inroad.eu @InRoadproject @InRoad_Project National Research Infrastructure Roadmapping in Europe Drivers and Trends InRoad Isabel Bolliger University of Lausanne Swiss Graduate Institute

More information

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference

More information

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration INTERNATIONAL STANDARD ISO 22612 First edition 2005-03-01 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration Vêtements de protection contre les agents

More information

PSRC REVIEW REPORT & CERTIFICATION RECOMMENDATION

PSRC REVIEW REPORT & CERTIFICATION RECOMMENDATION PSRC REVIEW REPORT & CERTIFICATION RECOMMENDATION KITSAP COUNTY COUNTYWIDE PLANNING POLICIES July 2, 2012 BACKGROUND A major emphasis of the Washington State Growth Management Act (GMA) is the need to

More information

STANDARDISATION OF SRF (ISO/TC 300)

STANDARDISATION OF SRF (ISO/TC 300) STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF

More information

Status report to ISO/TC204 October 2012

Status report to ISO/TC204 October 2012 [CEN/TC278/WG1 N1658] CEN/TC278/WG1 & ISO/TC204/WG5 Status report to ISO/TC204 October 2012 Jesper Engdahl Jesper Engdahl, WG Convenor Rapp Trans AG Hochstrasse 100 CH-4018 Basel, Switzerland Phone: +41

More information

European Standards and Services. Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 05 April 2011

European Standards and Services. Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 05 April 2011 European Standards and Services Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 05 April 2011 1 Why service standardization? Services market in the EU accounts for 60-70% of GDP and employment

More information

Confused by standards Standards for social alarms

Confused by standards Standards for social alarms Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for

More information

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING

More information

BUSINESS PLAN CEN/TC 125 MASONRY EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 125 MASONRY EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 125 MASONRY EXECUTIVE SUMMARY The scope of CEN/TC 125 is "Standardization in the field of masonry units of clay, calcium silicate, dense aggregate concrete, lightweight aggregate

More information

Standardization of diagnostic methods. Patrizia Rossi

Standardization of diagnostic methods. Patrizia Rossi Standardization of diagnostic methods Patrizia Rossi Istituto Superiore di Sanità, Rome, Italy What is a standard? International Standards provide a reference framework, or a common technological language,

More information