NEW VENTILATION AIR CONDITIONING AIR CLEANING HEATING

Transcription

1 NW Vort PROMTO PLUS HR4 VNTILTION IR ONITIONING IR LNING HTING TM 1

2 TM VORT PROMTO PLUS RNG HT ROVRY UNITS Product specifications: NW 2 models: vort PROMTO PLUS HR 4 vort PROMTO PLUS hr 4 m. xternal asing in polypropylene (PP). Heat xchanger rossed ounter-low type, made of PS (Polystyrene). xtremely high heat recovery rate (up to 92%). lectronically controlled brushless motors independently adjustable. Max airflow 38 m 3 /h. 3 available speeds. utomatic frost protection. y-pass 1%. Horizontal and Vertical installation. Provided with 2 5 filters (7 optional)..5 m long silencer with nominal diameter of 15 mm supplied. 2 mounting brackets for vertical installation and 4 feet for horizontal installation supplied. Protection rate: IPX2. Insulation class: l.ii. Vort PROMTO PLUS HR 4: R remote control supplied. 2 operating modes: automatic and manual. utomatic y-pass. Option of setting the temperature, humidity and O 2 thresholds. Timer. Vort PROMTO PLUS HR 4 M: 3 available speeds chosen through external device (speed selector supplied). Manual y-pass. an be used in conjunction with Vortice ambient sensors. Marking omply with the following uropean irectives: 26/95/ Low Voltage irective (LV) 24/18/ lectromagnetic ompatibility irective (M) 26/42/ ccording to the following state-of-the-ar t Standards: Safety: N , N , N , N 62233, N 6529 M: N , N , N , N PRORMN: N 38, N

3 KY TURS Offers continuous ventilation of the home. nergy saving thanks to brushless motors. an be integrated into a residential home automation network (Modus). Software can be easily updated through US connection. The P is easily accessed by removing the bottom panel. Recommended application in residential buildings (such as small detached homes) up to 2 m2 and commercial buildings. Horizontal or vertical installation facilitated by the minimal weight of the appliance (just 25 kg). Only for code UNTIONS N SUPPLIS VORT PROMTO PLUS RNG y-pass rost protection (efrosting) ilter In ISOTHRML conditions (similar indoor and outdoor air temperatures) or where the outdoor temperature is close to desired indoor temperature, the y-pass valve can be activated automatically or manually, allowing fresh air to y-pass (the heat exchanger) for natural ventilation (R-OOLING). In situations where the outdoor air temperature and RH % cause ice forming on heat exchanger, the frost protection valve automatically opens to mix up fresh outside air with installation room milder air. Simultaneously changes motor speed via the electronic control makes the defrosting process quicker and more efficient. In particularly harsh climates Vortice recommends the installation of 5 W, 12 W or 18 W in-duct pre-heaters, available as an optional accessories, each are automatically activated by the on-board electronics. VORT PROMTO PLUS RNG is supplied with 2 5 filters, for cleaning fresh and stale air flows. further optional 7 filter is available for additional filtering of the incoming air. n 5 filter box accessory is also available, for installation outside the machine. ilter efficiency is monitored by the on-board electronics, providing visual and acoustic warnings via the R remote control. 3

4 RGULTION N ONTROL VORT PROMTO PLUS MOL ach Vort Prometeo Plus feature is controlled by the radio frequency (R) remote control. The R remote control with L display featuring new integrated graphics can be used for the following purposes: Switching on/off. Selecting the appliance operating mode (Manual/utomatic). asy initial setting of minimum and maximum speed (no needs to directly operate the machine). Selecting one of the 3 speed settings. Selecting the y-pass function. Setting the Timer function (the product, working in Manual mode, will work at the maximum speed for: 1, 2, 3 or indefinitely, automatically slowing down to min speed). onfiguring the automatic operating parameters: desired indoor temperature (for bypass management only) can be set by the user between +15 and +3 (each step 1 ); relative humidity can be set by the user between 4% and 9% (each step 5%); Max. O 2 air concentration in the room can be set by the user between 5 ppm and 3. ppm (at step of 5 ppm); O 2 level can be disabled. Viewing machine malfunction information. n additional radio frequency (R) antenna, part code (22479) including a connection cable, is available as an option, and allows control Vort Prometeo Plus even if the position chosen for its installation is screened from radio waves. 4

5 filter specifications The air we breathe contains a huge number of potentially harmful particles, over 9% of them are smaller than 1 µm, for example: - ine particles emitted by motor vehicles and heating systems. - Viruses. - acteria. it is very important to use air exchange systems with high-efficiency filters, which capture most of these toxic particles. Mechanically controlled ventilation systems such as VORT PROMTO PLUS heat recovery units filter air as it enters served ambients, protecting the health and wellbeing of people occupying the rooms served by the appliance. on t forget: Over time, filters become clogged, leading to a greater pressure loss in the air circuit; the filters therefore require regular maintenance and should be replaced when they are no longer effective. ilters can be split into 2 main categories, based on their filtering efficiency: - Type G: coarse filter - Type : fine filter These categories are defined by uropean standard N779. Within the two categories, a progressive number indicates the efficiency level of the filter: the higher the number, the more efficient the filter is at capturing particles, as you can see from the chart below. ilter fficiency % G4 5 7 <.1 µm Virus.5 µm acteria 2.5 µm ine dusts 5 µm Mold spores 1 µm Pollen Particle size filters are the most efficient at capturing small particles. 5

6 IMNSIONS ØP L G M N O I L I H H Models ode G H I L M N O Ø P VORT PROMTO PLUS HR VORT PROMTO PLUS HR 4 M imensions (mm) THNIL T Max irflow Max Pressure Models ode V ~ 5 Hz W m3 /h l/s mmh 2 O Pa Kg Max VORT PROMTO PLUS HR VORT PROMTO PLUS HR 4 M Sound levels* VORT PROMTO PLUS RNG RPM Lw d () 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz Lw d () Inlet Outlet Lp d () 3m Radiated na** Inlet Outlet Radiated Inlet Outlet nd Radiated Inlet Outlet Radiated Inlet Outlet Radiated Inlet Outlet Radiated * Tests carried out using sound intensity measurement in a semi-anechoic chamber. ** ata not available. 6

7 performance curves VORT PROMTO PLUS HR 4 M POWR ONSUMPTION URVS VORT PROMTO PLUS HR 4 M IRLOW/PRSSUR URVS Power [W] p [mmh₂o] p [Pa] q [m³/h] q [l/s] q [m³/h] q [l/s] MX-max (335 RPM) MX def (37 RPM) M def (233 RPM) MIN def (16 RPM) MIN-min (7 RPM) VORT PROMTO PLUS HR 4 POWR ONSUMPTION URVS VORT PROMTO PLUS HR 4 IRLOW/PRSSUR URVS Power [W] p [mmh₂o] p [Pa] q [m³/h] q [l/s] efficiency curves q [m³/h] q [l/s] 335 RPM 3 RPM 265 RPM 21 RPM 16 RPM 7 RPM Test according to N 38 TOTL XHUST LOW RT (m 3 /h) HT ROVRY IINY (%) Test conditions: -5 /7%; +25 /28%. ata referred to test performed at R according to RITISH SP-Q system 4 standard. Influence on efficiency due to condensation heat fficiency(%) rendimento[%] Return-air aria ambiente +2 +2º airflow 15 m portata 15 3 /h 3 (42 l/s) /h (42 l/s) outside temperatura temperature esterna ( ) [º] return-air aria ambiente RH (%) UR ( ) (%) fficiency(%) rendimento [%] aria ry air secca [m 3/h] [l/s] fficiency as a function of the airflow

8 SSORIS escription ode Models TMP-TMPRTUR: Measures ambient room temperature, and starts the fan when the temperature exceeds the preset value. Once the temperature drops below the preset value, you can adjust the over-run timer from 3 to 2 minutes SMOK: Measures the air quality, detecting the presence of cigarette smoke, odours and other pollutants, and starts the fan when the concentration of pollutants exceeds the preset value. You can adjust the over-run timer from 3 to 2 minutes HS-HUMIITY: Measures ambient relative humidity. It starts the fan when the R.H. It incorporates an over-run timer (adjustable between 3 and 2 minutes) c pir- movement detector: etects the presence of a moving body within its sensor range, and starts the fan automatically. You can adjust the over-run timer from 3 to 2 minutes TIMR: djustable over-run timer between 3 and 2 minutes IMNSIONS (mm) ode Model TMP SMOK HS PIR TIMR If external room sensors are connected, specific wiring is required. 8

9 escription ode Models IR VLV OR XTRTION: - Ø 8 - Ø UTOMTI IR INLT: 15 L utomatic air inlet 15 m 3 /h 3 L utomatic air inlet 3 m 3 /h UTOMTI OUSTI IR INLT: 22-L utomatic acoustic air inlet 22 m 3 /h 3-L utomatic acoustic air inlet 3 m 3 /h 4-L utomatic acoustic air inlet 45 m 3 /h ITIONL SPIGOT: dditional spigot ONTROLS: xternal R Receiver Module R Remote ontroller White. n additional remote-controlled radiofrequency R device including a connection cable is available as an optional accessory and allows control of the appliance even if the position chosen for its installation is shielded from radio waves SP RGULTOR: three-speed selector switch electric HTer: When the temperature and relative humidity of air entering and leaving the Prometeo unit are such that frost may form on the heat exchanger surface, this can affect the efficiency of the unit. It can also affect the completely automatic system in the VORT PROMTO PLUS HR 4 and VORT PROMTO PLUS HR 4 M that manages changes in fan speeds that, in the vast majority of cases, allow defrosting to be carried out In particularly harsh climates, this may not solve the problem. In such cases, Vortice recommend the installation of a 5 W, 12 W or 18 W pre-heater on the air intake duct so that incoming air can be warmed. This heater will operate automatically for the minimum time needed and will ensure the problem of frosting is solved. SIZS (mm) ode Model ø Weight [kg] lectric heater W lectric heater W lectric heater 18 W

10 escription ode Models XTRNL ILTR OX: 5 xternal ilter ox Galvanised filter box (5) designed to simplify maintaining the VORT PROMTO PLUS HR 4 and VORT PROMTO PLUS HR 4 M. The filter box is fitted to the outside of the appliance and protects the intake and outlet ducts serving various rooms (replacing standard filters). Time spent on maintenance is less (thanks to a specially sized filter that guarantees perfect filtering characteristics even when the unit is used for long periods), and maintenance work is simplified as direct access to the Prometeo unit is not required ILTRS: 5 filter for VORT PROMTO PLUS HR 4 and PROMTO PLUS HR 4 M external filter box. 5 internal filter (single) for VORT PROMTO PLUS HR 4 and PROMTO PLUS HR 4 M. 7 internal filter (single) for VORT PROMTO PLUS HR 4 and PROMTO PLUS HR 4 M screwdriver: Hexagonal screwdriver for maintenance NOIS TTNUTOR: - To be installed in the ventilation system, always after the fan, and/or the filter box/duct heater. - Useful when noise level required is particularly low. - Working temperature: Maximum working pressure: 2 Pa. - Maximum air speed: 25 m/s max. SIZS (mm) ode Model ø ø Weight [kg] N 15 (Noise ttenuator) lexible Silencer 15/1 lexible Silencer 15/ KRUGHT SHUTTR: - To be directly mounted in ventilation ducts or on fan outlet. SIZS (mm) ode Model ø ø Weight [kg] - omposed by a cylinder in electro galvanized sheet steel calendered and welded. - losure and seal are ensured by a toroidal gasket in neoprene closed cell IN LIN-S GRVITY SHUTTR: - To be installed at the duct outlet on vertical wall. - Useful to avoid air return from the outside and to protect the product. - Totally manufactured from shockproof thermoplastic anti UV resin. - laps are shaped in order to avoid their block. SIZS (mm) ode Model ø Nr flaps GGR 15/

11 11 SIZS (mm) ode Model ø SIZS (mm) ode Model ø G G G SIZS (mm) ode Model ø SIZS (mm) ode Model ø ø V V V SIZS (mm) ode Model ø I I I escription ode Models IX GRILL: -To be mounted at the beginning or the end of a ventilation duct. - Totally manufactured from shockproof thermoplastic anti UV resin GRILL KIT: - To be mounted at the beginning or the end of a ventilation duct. - Totally manufactured from shockproof thermoplastic anti UV resin IR VLV: - To be applied to plafond, ceilings, ventilation ducts, double-ceilings etc. - llow flow rate regulation with a simple adjustment of the rotating core. - White thermoplastic polystyrene LUMINIUM LXIL UT: - Ideal for ventilation and air conditioning, low noise and for high pressure. - Totally manufactured from aluminium. - Length 4 m (Ø 1 mm -15 mm) INSULT LUMINIUM LXIL UT: - Ideal for ventilation and air conditioning, low heat dissipation, condensation, noise and for high pressure. - Totally manufactured from aluminium with internal thermal insulation by standard fiberglass (25 mm 16 kg/m 3 ). - Length 4 m (Ø 1 mm - 15 mm) VORT PLNUM: - VORT PLNUM 6 +1: ir distribution box with inspection opening for air supply or extraction up to 6 rooms + kitchen. - VORT PLNUM 5 +1 R: ir distribution box with inspection opening for air extraction up to 5 rooms + kitchen

12 ode /12 Vortice lettrosociali S.p. Strada erca, 2 razione di Zoate 267 Tribiano (Milano) Tel. (+39) ax (+39) Italia export@vortice-italy.com Vortice rance 15-33, Rue Le orbusier S réteil edex Tél. (+33) ax (+33) rance contact@vortice-france.com Vortice Limited eeches House-astern venue urton on Trent 13 Tel. (+44) ax (+44) United Kingdom sales@vortice.ltd.uk The description and illustrations in this catalogue are understood to be indicative and are not binding. Vortice reserves the right, while not changing the essential characteristcs of the models described and illustred, to modify products whenever necessary and without warning.