BS identifier BS_Title Committee Status Final Review Outcome BS 1054:1975 Specification for engineers' comparators for external measurement

Transcription

1 BS identifier BS_Title Committee Status Final Review Outcome BS 1054:1975 Specification for engineers' comparators for external measurement TDW/4 confirmed (2010) BS 10999:2010 Specification for distress signal units for the PH/4 fire and rescue service BS :2010 Collaborative business relationships -- A SVS/1/4 framework specification BS 1134:2010 Assessment of surface texture. Guidance and TDW/4 general information BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008) BS 1189:1986 BS 131-1:1961 Specification for baths made from porcelain enamelled cast iron Notched bar tests -- The Izod impact test of metals B/503 partially replaced by BS EN 232:2003 ISE/101 confirmed (2007) BS 131-4:1972 BS 131-5:1965 BS 131-6:1998 BS 131-7:1998 BS 1347:1986 BS :1990 BS :1990 BS :1990 BS :1990 BS :1990 BS :1990 BS :1990 BS 1390:1990 BS 1407:1970 Notched bar tests -- Calibration of pendulum impact testing machines for metals Notched bar tests -- Determination of crystallinity Notched bar tests -- Method for precision determination of Charpy V-notch impact energies for metals Notched bar tests -- Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals Specification for architects', engineers' and surveyors' metric scale rules Methods of test for soils for civil engineering purposes -- General requirements and sample preparation Methods of test for soils for civil engineering purposes -- Chemical and electro-chemical tests Methods of test for soils for civil engineering purposes -- Compaction-related tests Methods of test for soils for civil engineering purposes -- Compressibility, permeability and durability tests Methods of test for soils for civil engineering purposes -- Consolidation and permeability tests in hydraulic cells and with pore pressure measurement Methods of test for soils for civil engineering purposes -- Shear strength tests (total stress) Methods of test for soils for civil engineering purposes -- Shear strength tests (effective stress) Specification for baths made from vitreous enamelled sheet steel Specification for high carbon bright steel (silver steel) ISE/101 partially replaced by BS EN :1993 ISE/101 confirmed (2007) ISE/101 confirmed (2010) ISE/101 confirmed (2010) TDW/4 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/526/3 confirmed (2010) B/503 confirmed (2010) ISE/105 confirmed (2010) Page 1 of 20

2 BS 1428-D4:1963 BS :1991 BS :1991 Microchemical apparatus. Volumetric analysis -- Specification for capillary pipettes Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- General specification Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes LBI/1/2 confirmed (2010) ISE/109 confirmed (2010) ISE/109 confirmed (2010) BS :1991 Steel plate, sheet and strip. Carbon and ISE/109 confirmed (2010) carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip based on formability BS 1521:1972 Specification for waterproof building papers B/546 BS 1635:1990 BS :2010 BS 1782:1951 BS 18477:2010 BS 1906:1952 BS :1999 BS :1996 BS :1996 BS :1995 BS :1993 BS :1993 BS :1993 Recommendations for graphic symbols and abbreviations for fire protection drawings Cylindrical helical springs made from round wire and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold coiled springs not covered by BS EN 15800, and general spring testing -- Compression springs Specification for couplings for suction and delivery hose (1$9H in. to 8 in. nominal sizes) other than fire hose couplings Inclusive service provision. Requirements for identifying and responding to consumer vulnerability Specification for hose couplings (air and water) ($9B in. to 1$9D in. nominal sizes) products. General introduction -- Section 0.1: Specifications - IP standard for thermometers products. General introduction -- Specifications for IP standard reference liquids products. General introduction -- Barometric pressure corrections products -- Determination of acidity, neutralization value. Colour indicator titration method products -- Determination of sulfur. Lamp combustion method products -- Determination of specific energy products -- Determination of drop melting point of wax and petrolatum FSH/14 FME/9/3 PRI/66 SVS/0 PRI/66 obsolescent (2012) obsolescent (2012) Page 2 of 20

3 BS :1993 BS :1993 BS :1993 BS :1998 BS :1993 BS :1993 BS :2000 BS :2001 BS :1995 BS :1996 BS :1993 BS :2000 BS :2000 BS :2000 products -- Determination of oil content of water mix metalworking oil dilutions products -- Determination of oxidation stability of lubricating grease. Oxygen bomb method products -- Determination of cone penetration of petrolatum products -- Determination of distillation characteristics of volatile organic liquids products -- Determination of neutralization value of bitumen. Colour indicator titration method products -- Determination of ash of petroleum products containing mineral matter products -- Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method products -- Determination of air release of lubricating and hydraulic oils products -- Determination of residues in liquefied petroleum gases. Low temperature evaporation method products -- Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions. Dimethyl sulphoxide extraction refractive index method products -- Determination of open flash and fire point. Pensky-Martens method products -- Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method products -- Determination of phosphorus in gasoline. Spectrophotometric method products -- Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method Page 3 of 20

4 BS :1993 BS :1999 products -- Determination of cone penetration of lubricating grease products -- Determination of sulfur. High pressure combustion method BS :1993 BS 2457:1975 BS 2459:1974 BS 2464:1954 products -- Determination of congealing point of waxes and petrolatum Specification for protractors for drawing office use Specification for set squares (fixed and adjustable) for drawing office use Specification for hose couplings for petrol, oil and lubricants ($9L in. to 4 in. nominal sizes) BS 2543:2004 Upholstery fabrics for end use applications. Classification BS :2010 Roughness comparison specimens -- Specification for turned, ground, bored, milled, shaped and planed specimens TDW/4 confirmed (2010) TDW/4 confirmed (2010) PRI/66 obsolescent (2012) TCI/66 confirmed (2010) TDW/4/9 BS :2010 Roughness comparison specimens -- Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens TDW/4/9 BS :2004+A1:2008 Spectacle lenses -- Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses CH/172/3 confirmed (2010) BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008) BS :1989 Colliery haulage and winding equipment. -- Specification for wrought steel BS :Method 720B:1979 BS 2952:1958 BS :2004 Methods of testing plastics. Rheological properties -- Cup flow of phenolic and alkyd moulding materials Specification for rubber hose for i.c. engine cooling systems Sampling and analysis of glass-making sands -- Methods for sampling and physical testing of glass-making sands ISE/105 confirmed (2010) PRI/21 confirmed (2010) PRI/66 obsolescent (2012) LBI/1/2 confirmed (2010) BS 2979:1958 BS 2A 260-2A 265:2010 BS 2HC 100:2010 BS 2HR 10:2010 Transliteration of Cyrillic and Greek characters Specification for pan and 100$0D countersunk slotted head screws with ISO metric screw threads Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings Specification for nickel-cobalt-chromiummolybdenum-titanium-aluminium heatresisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) IDT/2 confirmed (2010) ACE/12 ACE/61 Page 4 of 20

5 BS 2HR 3:2010 BS 2HR 4:2010 Specification for nickel-cobalt-chromiummolybdenum-aluminium-titanium heatresisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2) Specification for nickel-chromium-cobaltaluminium-molybdenum-titanium heatresisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4) BS 2HR 40:2010 Specification for cobalt-chromium-tungstennickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5) BS 2HR 5:2010 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4) BS 2HR 505:2010 Specification for nickel-chromium-irontitanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) BS 2HR 506:2010 Specification for nickel-chromium-cobalttitanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) BS 2HR 51:2010 Specification for high expansion heatresisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 $0DC) BS 2HR 52:2010 Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3) BS 2HR 53:2010 Specification for nickel-iron-chromiummolybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder) BS 2HR 55:2010 Specification for nickel-iron-chromiummolybdenum-aluminium-titanium heatresisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) BS 2HR 6:2010 Specification for nickel-chromium- ironmolybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) BS 31:1940 BS 3227:2003 BS 336:2010 Specification. Steel conduit and fittings for electrical wiring Butyl rubber compounds (including halobutyl compounds). Specification Specification for fire hose couplings and ancillary equipment PEL/213 obsolescent (2011) PRI/54 confirmed (2008) FSH/17/8 Page 5 of 20

6 BS 3402:1969 Specification for quality of vitreous china B/503 confirmed (2010) sanitary appliances BS 3459:1985 Specification for stands for drawing boards TDW/4 confirmed (2010) BS 350:2004 Conversion factors for units SS/7 confirmed (2010) BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water PRI/88 replaced by BS EN :1999, BS EN :1999, BS EN :1999, BS EN :1999 and BS EN :1999 BS 3509:1962 Specification for spirit level vials TDW/4 confirmed (2010) BS :1993 Methods of fatigue testing -- Methods of fatigue testing. Guide to general principles ISE/101 confirmed (2009) BS :1963 Methods of fatigue testing -- Direct stress ISE/101 confirmed (2009) fatigue tests BS :2010 Methods of test for paints -- Index of test STI/10 methods BS 3998:2010 Tree work. Recommendations B/213 BS 3F 128:2010 BS 3HR 1:2010 BS 41:1973 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex) Specification for nickel-chromium-titaniumaluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4) Specification for cast iron spigot and socket flue or smoke pipes and fittings ACE/65 B/506 confirmed (2010) BS 4177:1992 Specification for cooker control units PEL/23 confirmed (2010) BS 4268:1967 Specification for the marking of wooden SME/32 confirmed (2007) hatchway covers BS 4280:1968 Transliteration of Arabic characters IDT/2 confirmed (2010) BS :1970 Methods of test for resistance to air and water penetration -- Permeable walling constructions (water penetration) B/519/1 confirmed (2010) BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008) BS 4358:1968 BS :1969 BS :1971 Glossary of terms used in air gauging with notes on the technique Specification for measuring instruments for constructional works -- Metric graduation and figuring of instruments for linear measurement Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using bull head rails TDW/4 confirmed (2010) TDW/4 confirmed (2010) RAE/2 confirmed (2010) BS :1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using flat bottom rail RAE/2 confirmed (2010) Page 6 of 20

7 BS :1975 BS :1974 BS :1975 BS :1975 Specification for railway turnouts for private users -- Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using bull head rail Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using flat bottom rails Specification for railway turnouts for private users -- Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails RAE/2 confirmed (2010) RAE/2 confirmed (2010) RAE/2 confirmed (2010) RAE/2 confirmed (2010) BS 4569:1983 BS :1984+A2:2010 BS :1982+A3:2010 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface Non-metallic conduits and fittings for electrical installations -- Specification for fittings and components of insulating material Non-metallic conduit fittings for electrical installations -- Specification for rigid conduits, fittings and boxes of insulating material TCI/66/-/8 confirmed (2008) PEL/213 PEL/213 BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008) BS 47-1:1991 BS 476-3:2004 BS 476-6:1989+A1:2009 BS :1980 BS 4811:1972 BS 4812:1972 BS :1991+A2:2009 Fishplates for railway rails -- Specification for rolled steel fishplates Fire tests on building materials and structures -- Classification and method of test for external fire exposure to roofs Fire tests on building materials and structures -- Method of test for fire propagation for products Internal and external wood doorsets, door leaves and frames -- Specification for dimensional requirements Specification for the presentation of research and development reports Specification for the romanization of Japanese Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for tubes RAE/2 confirmed (2010) FSH/22/-/8 FSH/21 B/538/2 confirmed (2010) IDT/2 confirmed (2010) IDT/2 confirmed (2010) ISE/110 partially replaced by BS EN 10357:2013 BS :1998 Furniture. Strength and stability of furniture - - Methods for determination of stability of non-domestic storage furniture FW/0/2 confirmed (2010) Page 7 of 20

8 BS 4894:1993 BS 493:1995+A1:2010 BS 4933:2010 BS 4971:2002 BS :2004+A1:2010 BS 4HR 601:2010 Specification for bifurcated rivets for general purpose use (metric series) Specification for airbricks and gratings for wall ventilation Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts Repair and allied processes for the conservation of documents. Recommendations General requirements for rotating electrical machines -- Specification for standard dimensions Specification for nickel-chromium-titaniumaluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) FME/9 confirmed (2010) B/519/1 FME/9 IDT/2/9 confirmed (2008) PEL/2 BS 4S 500:2010 BS 5046:1974 Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip Method for the estimation of equivalent diameters in the heat treatment of steel ACE/61 ISE/105 confirmed (2010) BS 5073:1982 Guide to stowage of goods in freight TW/1 confirmed (2008) containers BS 5200:1997 Specification for dimensions of hydraulic MCE/18 confirmed (2010) connectors and adaptors BS 5248:1990 Specification for aspirated hygrometer LBI/1/2 confirmed (2010) BS 5252:1976 Framework for colour co-ordination for STI/14 confirmed (2010) building purposes BS 5252F:1976 Colour matching fan STI/14 confirmed (2010) BS :1998 Emergency lighting -- Code of practice for electrical low mounted way guidance systems for emergency use EL/1/1 confirmed (2010) BS :1999 BS :1999 Emergency lighting -- Code of practice for design, installation, maintenance and use of optical fibre systems Emergency lighting -- Specification for component parts of optical fibre systems BS :1999 Emergency lighting -- Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems BS :2003 Pressure vessel details (dimensions) -- Specification for saddle supports for horizontal cylindrical pressure vessels BS 5285:1975 BS :1991+A2:2010 BS 5346:1976 Specification. Performance of a.c. electric ventilating fans and regulators for nonindustrial use Continental quilts -- Specification for quilts containing fillings other than feather and/or down Specification. ISO metric trapezoidal screw threads EL/1/1 confirmed (2010) EL/1/1 confirmed (2010) EL/1/1 confirmed (2010) PVE/1 confirmed (2010) CPL/59 confirmed (2010) TCI/66 FME/9 confirmed (2010) Page 8 of 20

9 BS 5380:1984 BS :2010 BS :2000+A2:2008 BS :2005 BS :2003+A1:2008 BS :1993+A2:2010 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads Stairs -- Code of practice for the design of stairs with straight flights and winders Specification for performance requirements and tests for office furniture -- Office pedestal seating for use by persons weighing up to 150kg and for use up to 24 hours a day, including type-approval tests for individual components Code of practice for domestic butane- and propane-gas-burning installations -- Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper Code of practice for the design of road lighting -- Lighting of tunnels Buildings and structures for agriculture -- Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry BS :1977 Methods of test for falsework equipment -- Floor centres BS :1982 Methods of test for falsework equipment -- Props BS 5546:2010 Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kw net BS :1980 Cinematography. 16 mm film. Spindles -- Specification for dimensions of precision grade spindles for 16 mm cinematograph equipment and telecine machines MCE/18 confirmed (2010) B/208 FW/0/3 confirmed (2010) GSE/24 confirmed (2010) EL/1/2 B/549 B/514 confirmed (2010) B/514 partially replaced by BS EN 1065:1999 GSE/30 CPW/36 partially replaced by BS :1978 BS 5605:1990 BS :2004 BS 567:1973 BS 5682:1998 BS 5854:1980 BS 5864:2010 BS :2004 Recommendations for citing and referencing published material Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks -- Code of practice for the selection, installation and location of new escalators and moving walks Specification for asbestos-cement flue pipes and fittings, light quality Specification for probes (quick connectors) for use with medical gas pipeline systems Code of practice for flues and flue structures in buildings Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kw net (2nd and 3rd family gases). Specification Textiles and textile products. Curtains and drapes -- General requirements IDT/2/2 confirmed (2010) MHE/4 confirmed (2010) B/506 confirmed (2010) CH/121/1 B/506 confirmed (2010) GSE/30/-/7 TCI/66 confirmed (2010) Page 9 of 20

10 BS :2008 BS :1988 BS :1987 BS :1992 BS :1992+A2:2009 BS :1992 BS :1992 BS :2002+A2:2010 BS :2002+A2:2010 BS :2004+A1:2010 BS :2004+A1:2010 Fabrics for curtains, drapes and window blinds -- Flammabililty requirements. Specification Automatic gas burners -- Specification for burners with input rating 60 kw and above Automatic gas burners -- Specification for packaged burners with input rating 7.5 kw up to but excluding 60 kw Railway rolling stock materials -- Specification for forged and rolled wheel centres Railway rolling stock materials -- Specification for monobloc wheels for traction and trailing stock Railway rolling stock materials -- Specification for forged and rolled tyres Railway rolling stock materials -- Specification for wheelsets for traction and trailing stock Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002) Concrete pipes and ancillary concrete products -- Specification for prestressed nonpressure pipes and fittings with flexible joints Concrete pipes and ancillary concrete products -- Specification for road gullies and gully cover slabs TCI/66/-/8 GSE/27 GSE/27 partially replaced by BS EN 676:1997 partially replaced by BS EN 676:1997 RAE/3/-/1 confirmed (2010) RAE/3/-/1 confirmed (2010) RAE/3/-/1 confirmed (2010) RAE/3/-/1 confirmed (2010) B/505 B/505 B/505 B/505 Page 10 of 20

11 BS 5930:1999+A2:2010 BS :1991 BS 5974:2010 Code of practice for site investigations B/526/3 partially replaced by BS EN ISO :2002, BS EN ISO :2004, BS EN ISO :2003, BS EN ISO :2006, BS EN ISO :2005, BS EN ISO :2005, BS EN :2007, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012, BS EN ISO :2012 and BS EN ISO :2012 Code of practice for control of undesirable static electricity -- General considerations Code of practice for the planning, design, setting up and use of temporary suspended access equipment EXL/31 B/514/39 replaced by PD CLC/TR 50404:2003 BS :1981 Lintels -- Method for assessment of load B/519/3 confirmed (2010) BS :1998 Sampling and examination of bituminous mixtures for roads and other paved areas -- Methods of test for the determination of wheel-tracking rate and depth B/510/1 BS :2004 BS 5998:1983 BS 5T 100:2010 BS 6014:2003 Sampling and examination of bituminous mixtures for roads and other paved areas -- Method for the use of road surface hardness probe Specification for quality levels for steel valve castings Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock Ethylene propylene rubber compounds. Specification B/510/2 confirmed (2010) PSE/18/1 confirmed (2007) ACE/61 PRI/54 confirmed (2008) Page 11 of 20

12 BS :2004 Code of practice for the planning, design, installation and use of permanently installed access equipment -- Travelling ladders and gantries B/514/39 confirmed (2010) BS 6072:1981 Method for magnetic particle flaw detection WEE/46 partially replaced by BS EN ISO :2001 BS :2010 Project management -- Principles and guidelines for the management of projects MS/2 BS 6089:2010 Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN B/517/1 BS :2010 Building and civil engineering. Vocabulary -- Introduction and index BS 6165:2002 BS 6172:2010 BS :1993 BS :2002 BS 6213:2000+A1:2010 BS :2010 Specification for small disposable fire extinguishers of the aerosol type Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases) Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation -- Methods for iron and steel Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis -- Reference methods of analysis. Summary of methods CB/101/-/2 FSH/2 confirmed (2010) GSE/30/-/10 ISE/102 confirmed (2008) ISE/102 confirmed (2008) Selection of construction sealants. Guide B/547 Maritime works -- Code of practice for the design of quay walls, jetties and dolphins CB/502 BS 6364:1984 Specification for valves for cryogenic service PSE/18/1 confirmed (2007) BS 6371:1983 Recommendations for citation of unpublished IDT/2/2 confirmed (2010) documents BS 6381:1983 Specification for drawing boards TDW/4 confirmed (2010) BS 64:1992 BS :1996 BS 641:1951 BS :2010 BS 65:1991 Specification for normal and high strength steel bolts and nuts for railway rail fishplates Magnetic materials -- Resistance and temperature classification of insulation coatings Dimensions of small rivets for general purposes Sanitary installations -- Code of practice for the provision of public toilets Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings RAE/2 confirmed (2010) ISE/108 confirmed (2010) FME/9 B/209/-/2 obsolescent (2010) B/505 confirmed (2010) BS 6510:2010 BS 6537:1984 Steel-framed windows and glazed doors. Specification Specification for staple type connectors for hydraulic fluid power applications B/538/1 MCE/18 confirmed (2010) Page 12 of 20

13 BS 6580:2010 Specification for corrosion inhibiting, engine coolant concentrate ("antifreeze") I/- BS 6626:2010 Maintenance of electrical switchgear and controlgear for voltages above 1 kv and up to and including 36 kv. Code of practice PEL/17/1 BS 6656:2002 BS 6657:2002 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide Assessment of inadvertent initiation of bridge wire electro-explosive devices by radiofrequency radiation. Guide EXL/31 EXL/31 replaced by PD CLC/TR 50427:2004 replaced by PD CLC/TR 50426:2004 BS 6701:2010 BS 6734:2004 BS :1990 BS 6806:2002 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method Neurosurgical implants -- Specification for marking and packaging of implantable neural stimulators Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid TCT/7 CH/216 confirmed (2010) CH/150/2 confirmed (2010) TCI/80 confirmed (2010) BS 6807:1986 Methods of test for the ignitability of mattresses with primary and secondary sources of ignition BS :1987 Winding wires. Basic dimensions -- Specification for diameters of conductors for round winding wires BS 6888:1988 BS 6996:2003 BS 6999:1989 Methods for calibration of bonded electrical resistance strain gauges Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification Specification for vitreous-enamelled lowcarbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kw FW/6 L/-/99 replaced by BS 6807:1990 obsolescent (2008) ISE/101 confirmed (2007) PRI/54 confirmed (2008) B/506 confirmed (2010) BS 6S 100:2010 BS :2008 Aerospace series. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube) Design management systems -- Guide to managing the design of manufactured products ACE/61 TDW/4/7 BS :1994 Design management systems -- Guide to MS/4 managing service design BS 7014:1989 Guide to the romanization of Chinese IDT/2 confirmed (2010) BS :1988 Fireworks -- Classification of fireworks CII/47 obsolescent (2010) BS :1988 Fireworks -- Specification for fireworks CII/47 obsolescent (2010) Page 13 of 20

14 BS :1988 Fireworks -- Methods of test for fireworks CII/47 partially replaced by BS EN parts and DD 14035:2007 BS :2010 Code of practice for safe use of cranes -- MHE/3/11 Lorry loaders BS 7172:1989 Guide to assessment of position, size and departure from nominal form of geometric features TDW/4 confirmed (2010) BS 7188:1998+A2:2009 Impact absorbing playground surfacing. Performance requirements and test methods SW/65 confirmed (2010) BS 7195:1989+A1:2010 BS 7270:2006 Guide for prevention of corrosion of metals caused by vapours from organic materials Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test BS :2008 Writing and marking instruments -- Specification for caps to reduce the risk of asphyxiation BS :2010 BS :2010 BS :2010 BS :2003 BS :1994 BS :1993 BS :1994 BS :2010 BS :1996 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- General requirements Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for polybutylene (PB) pipe and associated fittings Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for crosslinked polyethylene (PE-X) pipes and associated fittings Components for smoke and heat control systems -- Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice Coatings on metal fasteners -- Specification for organic coatings Coatings on metal fasteners -- Specification for torque/clamping force relationship Coatings on metal fasteners -- Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings Coatings on metal fasteners -- Specification for mechanically applied zinc and zinc based coatings Coatings on metal fasteners -- Specification for phosphate or phosphate and oil coatings PKW/0 ISE/101 TDW/4/-/2 PRI/88 PRI/88 PRI/88 FSH/25 confirmed (2008) FME/9 confirmed (2010) FME/9 confirmed (2010) FME/9 confirmed (2010) FME/9 FME/9 confirmed (2010) BS 7375:2010 Distribution of electricity on construction and demolition sites. Code of practice PEL/121/2 Page 14 of 20

15 BS :2005 Fracture mechanics toughness tests -- Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1 ISE/101 BS :1997 Fracture mechanics toughness tests -- Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials ISE/101 confirmed (2007) BS :2010 BS :2010 BS :2010 Pavements constructed with clay, natural stone or concrete pavers -- Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of rigid pavements of clay pavers B/507 B/507 B/507 BS 7581:1992 Guide to presentation of tables and graphs IDT/2 confirmed (2010) BS 7619:2010 BS 7647:1993 BS 7654:2010 Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification Specification for radio teleswitches for tariff and load control Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture BS 7657:2010 Specification for cut-out assemblies up to 100 A rating, for power supply to buildings PRI/82 PEL/13 confirmed (2010) PEL/121/1 PEL/121/1 BS 7659:1994 Specification for dog muzzles GW/3 confirmed (2010) BS 7668:2004 BS 7722:2010 BS :1995 BS :1997 BS :1997 BS 7837:1996 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification Surface covered PVC-U profiles for windows and doorsets. Specification Swaged collar grooved rivets -- Specification for sizes up to and including 10 mm diameter Swaged collar grooved rivets -- Specification for sizes from 12.7 mm up to and including 34.9 mm Calibration of rubber and plastics test equipment. Calibration schedules -- Dimensional properties Specification for flammability performance for textiles used in the construction of marquees and similar textile structures ISE/103 confirmed (2010) B/538/1 FME/9 confirmed (2010) FME/9 confirmed (2010) PRI/20 obsolescent (2008) TCI/66/-/8 confirmed (2008) Page 15 of 20

16 BS :1996 Metric rivets for the attachment of friction linings -- Specification for semi-tubular rivets FME/9 confirmed (2010) BS 7865:1997 Specification for steel electrical conductor rail for railway motive power supply RAE/2 confirmed (2010) BS 7875:2009 Synthetic saddle trees. Specification SW/136 BS 7882:2008 BS :1997 BS :1999 BS 7915:1998 Method for calibration and classification of torque measuring devices Code of practice for assessment of hazard to life and health from fire -- General guidance Code of practice for assessment of hazard to life and health from fire -- Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments ISE/101 FSH/16 confirmed (2010) FSH/16 confirmed (2010) PH/9 confirmed (2006) BS 7956:2000 Specification for primers for woodwork STI/28 confirmed (2010) BS 7963:2000 Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment PH/9 confirmed (2006) BS :2010 Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances -- Guide for using electronic portable combustion gas analysers in non-domestic premises for the measurement of carbon monoxide and carbon dioxide levels and the determination of combustion performance GSE/30 BS :2002 BS :2003 BS 799-5:2010 Protective clothing and equipment for use in violent situations and in training -- General requirements Protective clothing and equipment for use in violent situations and in training -- Slash resistant gloves. Requirements and test methods Oil burning equipment -- Carbon steel oil storage tanks. Specification PH/3/12 confirmed (2007) PH/3/12 RHE/13 BS 7996:2009 Torque measuring devices. Calibration and classification using continual torque application. Method ISE/101 BS :1997+A1:2010 BS :1990 BS :2010 Workmanship on building sites -- Code of practice for sealing joints in buildings using sealants Workmanship on building sites. Code of practice for concrete work -- Sitework with in situ and precast concrete Code of practice for strengthened/reinforced soils and other fills B/547 partially replaced by BS :2014 B/525/2 B/526/4 partially replaced by BS :2014 Page 16 of 20

17 BS 8008:1996+A1:2008 BS :2003+A1:2009 BS :2008+A1:2010 BS 822-6:2004 BS 826:1978 BS :2010 BS :2010 BS :2010 BS :2010 BS 8300:2009+A1:2010 BS :1994 Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes Screeds, bases and in situ floorings -- Concrete bases and cementitious levelling screeds to receive floorings. Code of practice Screeds, bases and in situ floorings -- Synthetic resin floorings. Code of practice Terminal markings for electrical machinery and apparatus -- Lead colours for rotating electrical machinery Specification for steel single tier bolted shelving (angle upright type) Code of practice for the design and installation of natural stone cladding and lining -- General Code of practice for the design and installation of natural stone cladding and lining -- Traditional handset external cladding Code of practice for the design and installation of natural stone cladding and lining -- Stone-faced pre-cast concrete cladding systems Code of practice for the design and installation of natural stone cladding and lining -- Rainscreen and stone on metal frame cladding systems Design of buildings and their approaches to meet the needs of disabled people. Code of practice Installation of domestic heating and cooking appliances burning solid mineral fuels -- Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations B/526 confirmed (2010) CB/300 CB/300 PEL/2 confirmed (2010) MHE/8 confirmed (2008) B/545 B/545 B/545 B/545 B/559 RHE/28 BS 835:1973 BS 842:1965 BS 8422:2003 BS 8423:2010 Specification for asbestos-cement flue pipes and fittings, heavy quality Specification for a.c. voltage-operated earthleakage circuit breakers Force measurement. Strain gauge load cell systems. Calibration method Fireguards for fires and heating appliances for domestic use. Specification B/506 confirmed (2010) PEL/23 confirmed (2010) ISE/101 confirmed (2008) CW/1 BS 8427:2004 Jug water filter systems. Specification B/504 confirmed (2010) BS 8428:2004 BS 8431:2010 Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the clothing for emergency teams (type 3-ET equipment) Electrical static meters for secondary metering and sub-metering. Specification PH/3/3 confirmed (2010) SEM/1 Page 17 of 20

18 BS 8438:2004+A1:2010 BS 8465:2010 BS :2006 BS :2008 Troughed belt conveyors. Specification MHE/9 Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison membrane technique Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Negative pressure, air purifying devices with full face mask. Specification Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Powered air-purifying respirators. Specification MCE/18 PH/4 PH/4 BS 8488:2009+A1:2010 BS 8491:2008 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems PEL/23 GEL/20/18 BS 8493:2008+A1:2010 BS 8511:2010 BS :2010 BS 8519:2010 Light reflectance value (LRV) of a surface. Method of test Code of practice for the installation of solid fuel heating and cooking appliances in small craft Security dogs -- Code of practice for the use of detection dogs Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice B/559 RHE/28/-/1 GW/3 FSH/1 BS :2010 Greywater systems -- Code of practice CB/506 BS 8529:2010 BS 8530:2010 Composite doorsets. Domestic external doorsets. Specification Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification B/538/2 B/542/6 BS 8536:2010 BS 8537:2010 Facility management briefing. Code of practice Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes FMW/1 NFE/34/3 BS 8580:2010 BS 8666:2005 BS 8766:2004 Water quality. Risk assessments for Legionella control. Code of practice Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification Names and identifiers of individuals and groups. Data structure for interoperability. Specification EH/3/4 ISE/104 IST/36 confirmed (2010) BS 8878:2010 Web accessibility. Code of practice IST/45 Page 18 of 20

19 BS :2010 BS 8903:2010 BS 9295:2010 BS 959:2008 BS 9999:2008 BS A 400:2010 BS AU 170:1979 CP :1970 CP :1974 DD 253:2001 DD 263:2010 DD :2011 PD 0006:1995 PD 0017:2001 PD 0018:2001 PD 0028:2002 PD 25111:2010 PD 25666:2010 PD 6433:1969 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- The process of remanufacture. Specification Principles and framework for procuring sustainably. Guide Guide to the structural design of buried pipelines Specification for internal micrometers (including stick micrometers) Code of practice for fire safety in the design, management and use of buildings Specification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel Methods for measurement of reflectance of rear view mirrors Code of practice for pipelines -- Design and construction of steel pipelines in land Code of practice for foundations for machinery -- Foundations for reciprocating machines Mouthguards for use in sport and recreation. Requirements and test methods Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice Fixed fire protection systems. Industrial and commercial watermist systems -- Tests and requirements for watermist systems for the protection of combustion turbines and machinery spaces with volumes up to and including 80 m$u3 Technical guide to JPEG. Digital compression of photographic images Business documents. Guidance on effective layout and presentation Information management systems. Building systems fit for audit Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement Business continuity management. Guidance on human aspects of business continuity Business continuity management. Guidance on exercising and testing for continuity and contingency programmes Guide to the application of stress analysis to design TDW/4 SDS/1/3 B/505 TDW/4 FSH/14 ACE/12 AUE/12 confirmed (2010) PSE/17 confirmed (2010) B/526 confirmed (2010) PH/3/11 GW/1/2 FSH/18 IST/37 confirmed (2010) IDT/2 confirmed (2010) ICT/- confirmed (2010) IST/15 confirmed (2010) BCM/1 BCM/1 PVE/1 confirmed (2010) Page 19 of 20

20 PD 6439:1969 PD :2004 PD :1988 PD :1987 A review of the methods of calculating stresses due to local loads and local attachments of pressure vessels General metrology -- Practical guide to measurement uncertainty Toxicity of combustion products -- Guide to the relevance of small-scale tests for measuring the toxicity of combustion products of materials and composites Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 'Fire precautions in the design and construction of buildings' -- Guide to the fire performance of glass PVE/1 confirmed (2010) SS/6 confirmed (2010) FSH/16 confirmed (2010) FSH/14 PD 6531:2010 Queries and interpretations on BS FSH/12/1 PD 6612:2004 Guidance on the preparation of codes of practice for building PD 6631:1998 Technical guide to ISO/IEC :1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5) PD 6662:2010 PD :2003 Scheme for the application of European standards for intrusion and hold-up alarm systems Aggregates -- Armourstone. Guidance on the use of BS EN CB/10 IST/37 confirmed (2010) GW/1/2 B/502 PD :2010 PD 6697:2010 PD :2010 PD 6777:2003 Background paper to the National Annexes to BS EN and BS EN Recommendations for the design of masonry structures to BS EN and BS EN Nanotechnologies -- Guide to assessing airborne exposure in occupational settings relevant to nanomaterials Guide to practical implementation of JPEG 2000 B/525/2 B/525/6 NTI/1 IST/37 confirmed (2010) Page 20 of 20