Updated Nov of 43

Transcription

1 BS 10008:2008 Evidential weight and legal admissibility of electronic IDT/1/3 current Revision in progress information. Specification BS :2008 Specification for gauge blanks -- Plug, ring and calliper TDW/4 current Confirmation gauges BS 1070:1993 Specification for black paint (tar-based) STI/27 confirmed (2008) Reconfirmation BS :2003 Marine plywood -- Requirements B/541 confirmed (2008) Reconfirmation BS :2003 Marine plywood -- Determination of bonding quality B/541 confirmed (2008) Reconfirmation using the knife test BS 1109:1943 Specification for cold forged mild steel rivets for cold FME/9 obsolescent (2010) Withdrawal closing BS 1129:1990 Specification for portable timber ladders, steps, trestles B/512 confirmed (2008) Reconfirmation and lightweight stagings BS :1991 Packaging code. Metal containers -- Metal drums PKW/0/-/8 confirmed (2008) Reconfirmation BS :1991 Packaging code -- Packaging in glass PKW/0/-/7 obsolescent (2008) Withdrawal BS :1990 Metal scaffolding. Tubes -- Specification for aluminium B/514 confirmed (2008) tube BS :1982 Metal scaffolding -- Specification for prefabricated steel B/514 confirmed (2008) Reconfirmation splitheads and trestles BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008) BS 1155:2003 Natural rubber compounds for extrusion. Specification PRI/54 confirmed (2008) Reconfirmation BS 1170:1983 BS 1192:2007 Recommendations for treatment of water for marine boilers Collaborative production of architectural, engineering and construction information. Code of practice CII/62 confirmed (2008) Reconfirmation B/555 current Confirmation BS 1196:1989 Specification for clayware field drain pipes and junctions B/505 confirmed (2008) Reconfirmation BS :2002 Specification for nails -- Steel nails B/518 confirmed (2008) Reconfirmation BS :1974 Specification for nails -- Copper nails B/518 confirmed (2008) Reconfirmation BS :1974 Specification for nails -- Aluminium nails B/518 confirmed (2008) Reconfirmation BS 1211:1958 Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage PSE/10 partially replaced by BS 4772:1988 Withdrawal BS 1217:2008 Cast stone. Specification B/524/4 current Confirmation BS 1262:2002 Metal packaging. Round lever-lid metal containers for PKW/0/-/8 confirmed (2008) Reconfirmation surface coatings. Specification BS 1336:1971 Specification for knotting STI/3 confirmed (2008) Reconfirmation BS :2002 Humidity -- Terms, definitions and formulae CPI/29 confirmed (2008) BS : A plugs, socket-outlets, adaptors and connection units -- Specification for fused conversion plugs PEL/23 current Revision in progress BS 1411:1972 BS :1991 Specification for printers' cards and blanks (terms and sizes) Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles -- Specification for fillings and stuffings other than feather and/or down I/- current Confirmation TCI/66 confirmed (2008) reconfirmation BS 1427:2009 Guide to on-site test methods for the analysis of waters EH/3/2 current Confirmation BS 1428-D1:1965 Microchemical apparatus. Volumetric analysis -- LBI/1/2 obsolescent (2010) Withdrawal Specification for burettes with pressure-filling device and automatic zero BS 1434:1985 Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators NFE/34 confirmed (2008) Reconfirmation BS 1439:1992 Specification for single-ply wet-creped paper towelling I/- current Confirmation Updated Nov of 43

2 BS 1460:1967 Method for determination of apparent density after compaction of precipitated calcium carbonate I/- current Confirmation BS 1473:1972 Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock NFE/35 confirmed (2008) Reconfirmation BS 1489:1972 Specification for the packaging of covered winding wires GEL/55 obsolescent (2008) Withdrawal for electrical purposes BS 1524:1993 Specification for cellulose acetate moulding materials PRI/82 confirmed (2008) Reconfirmation BS 1563:1949 Specification. Cast iron sectional tanks (rectangular) PVE/20 obsolescent (2008) withdrawal BS 1596:1992 Specification for fibreboard drums PKW/0/-/4 obsolescent (2008) Withdrawal BS 16:1974 Specification for telegraph material (insulators, pole fittings, etc.) BS :1988 Re-usable hypodermic syringes for insulin injection -- Specification for syringes for use with insulin of strength 100 units per millilitre BS 1659:1950 BS 1685:2008 BS :1991 BS 1745:1951 Specification for tractive armature direct current neutral track and line relays for railway signalling Bevel protractors (mechanical and optical). Requirements and test methods Analysis of soaps -- General introduction, sampling, and test for presence of synthetic anionic-active surface active agents Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position) TCT/- current Confirmation CH/84 obsolescent (2008) Withdrawal GEL/9 obsolescent (2009) Withdrawal TDW/4 current Confirmation CII/34 confirmed (2008) Reconfirmation GEL/9 obsolescent (2009) Withdrawal BS 1749:1985 Recommendations for alphabetical arrangement and the IDT/2/2 obsolescent (2008) Withdrawal filing order of numbers and symbols BS 1781:1981 Specification for linen and linen union textiles TCI/66 confirmed (2008) Reconfirmation BS 18004:2008 Guide to achieving effective occupational health and HS/1 current Confirmation safety performance BS 1808:1985 Specification for cut business forms and letterheads I/- current Confirmation BS :1968 BS 1873:1975 BS :1983 BS :1986 Glossary of terms relating to solid fuel burning equipment -- Industrial water heating and steam raising installations Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries Testing concrete -- Methods of accelerated curing of test cubes Testing concrete -- Guide to the use of non-destructive methods of test for hardened concrete E/- obsolescent (2010) withdrawal PSE/18/2 confirmed (2007) Reconfirmation B/517/1 obsolescent (2010) Withdrawal B/517/1 obsolescent (2010) Withdrawal BS :1978 Glass container finishes. -- Specification for continuous thread finish PKW/0/-/7 confirmed (2008) Reconfirmation BS :1981 Glass container finishes. -- Specification for crown finish PKW/0/-/7 obsolescent (2008) withdrawal BS 192-2:1998 Open-ended wrenches -- BS and Whitworth MTE/15 confirmed (2008) Reconfirmation BS :1990 Stabilized materials for civil engineering purposes -- General requirements, sampling, sample preparation and tests on materials before stabilization B/510 obsolescent (2009) Withdrawal BS :1990 Stabilized materials for civil engineering purposes -- B/510 obsolescent (2009) Withdrawal Methods of test for cement-stabilized and lime-stabilized materials BS 1974:1953 Specification for large aluminium alloy rivets ($9H in. to 1 in. nominal diameters) FME/9 obsolescent (2010) Withdrawal Updated Nov of 43

3 BS :1990 BS :1990 BS :1990 BS :1990 Fungal resistance of panel products made of or containing materials of organic origin -- Guide to methods for determination Fungal resistance of panel products made of or containing materials of organic origin -- Method for determination of resistance to wood-rotting Basidiomycetes Fungal resistance of panel products made of or containing materials of organic origin -- Method for determination of resistance to cellulose-decomposing microfungi Fungal resistance of panel products made of or containing materials of organic origin -- Methods for determination of resistance to mould or mildew B/515 confirmed (2008) Reconfirmation B/515 confirmed (2008) Reconfirmation B/515 confirmed (2008) Reconfirmation B/515 confirmed (2008) Reconfirmation BS 1998:1970 Specification for triphenyl phosphate I/- current Withdrawal BS 2035:1966 Specification for cast iron flanged pipes and flanged fittings BS 2037:1994 Specification for portable aluminium ladders, steps, trestles and lightweight stagings BS :1973 Tube and pipe fittings for engineering purposes -- Copper and copper alloys capillary and compression tube fittings for engineering purposes PSE/10 partially replaced by Withdrawal BS 4772:1988 B/512 confirmed (2008) Reconfirmation NFE/34 obsolescent (2008) Withdrawal BS :1984 Tube and pipe fittings for engineering purposes -- Specification for olive type copper alloy compression tube fittings NFE/34 obsolescent (2008) Withdrawal BS 2058:1961 Specification for Lunge-Rey weighing pipette LBI/1/2 obsolescent (2010) Withdrawal BS :1998 BS :1998 BS 215-1:1970 Closets for use with chemicals -- Specification for portable closets Closets for use with chemicals -- Specification for permanently installed closets Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission -- Aluminium stranded conductors B/505 confirmed (2008) Reconfirmation B/505 confirmed (2008) Reconfirmation GEL/20/16 confirmed (2008) Reconfirmation BS 215-2:1970 Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission -- Aluminium conductors, steel-reinforced GEL/20/16 confirmed (2008) Reconfirmation BS 2452:1954 Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes) BS :1968 Specification for hose couplings for petrol, oil and lubricants. -- Quick-acting couplings BS :1980 Hose couplings for petrol, oil and lubricants. -- Specification for 100 mm quick-acting couplings: European type MHE/3/3 obsolescent (2009) Withdrawal GSE/42 obsolescent (2008) Withdrawal GSE/42 obsolescent (2008) Withdrawal BS 2474:1993 Recommendations for names for chemicals used in I/- current Withdrawal industry BS 2483:1977 Specification for overbed tables CH/101 confirmed (2007) Reconfirmation BS 2486:1997 Recommendations for treatment of water for steam CII/62 confirmed (2008) Reconfirmation boilers and water heaters BS 2520:1983 Specification for barometer conventions and tables, SS/7 obsolescent (2008) withdrawal their application and use BS 2540:1991 Specification for granular desiccant silica gel BS 2565:1972 Specification for drums for covered winding wires and strips for electrical purposes GEL/55 obsolescent (2008) Withdrawal Updated Nov of 43

4 BS :1980 Rules for the design of cranes -- Specification for classification, stress calculations and design of mechanisms MHE/3/1 replaced by BS EN :2004+A1:2009, BS EN :2004+A3:2009, DD CEN/TS :2004 and DD CEN/TS :2004 until part 3-3 of the series is published Reconfirmation BS 2627:1970 Specification for wrought aluminium for electrical GEL/20/16 confirmed (2008) Reconfirmation purposes. Wire BS 2656:1972 Specification for zinc anodes, zinc oxide and zinc salts STI/33 obsolescent (2011) withdrawal for electroplating BS 275:1927 Specification for dimensions of rivets ($9H inch to 1$9L FME/9 obsolescent (2010) Withdrawal inch diameter) BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008) BS 2754:1976+A1:1977 Construction of electrical equipment for protection against electric shock BS 2767:1991 Specification for manually operated copper alloy valves for radiators BS :Method 327A: Methods of testing plastics. Mechanical properties -- Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products JPEL/64 confirmed (2008) Withdrawal RHE/16 confirmed (2008) Reconfirmation PRI/82 confirmed (2008) Reconfirmation BS :Method 332A: Methods of testing plastics. Mechanical properties -- Stiffness of plastics film BS :Method 451B: Methods of testing plastics. Chemical properties -- Determination of acetone-soluble matter in phenolic moulding materials after moulding BS :Method 452C: Methods of testing plastics. Chemical properties -- Determination of butyl rubber content of low density polyethylene compounds BS :Methods 530AMethods of testing plastics. Optical and colour properties, weathering -- Determination of yellowness index. Determination of the colour of near-white or nearcolourless materials PRI/21 obsolescent (2008) withdrawal PRI/21 obsolescent (2008) withdrawal PRI/21 obsolescent (2008) withdrawal PRI/21 obsolescent (2008) withdrawal BS 2808:1969 Specification for artists' water-colour brushes for local CW/11 confirmed (2008) Reconfirmation authorities BS :1991 Guide to statistical interpretation of data -- Routine SS/2 confirmed (2008) Reconfirmation analysis of quantitative data BS 2892:1974 Specification for non-returnable wooden trays for PKW/0/-/11 confirmed (2008) withdrawal tomatoes BS 2897:1970 Specification for wrought aluminium for electrical purposes. Strip with drawn or rolled edges GEL/20/16 confirmed (2008) Reconfirmation BS 2909:1957 Specification for cabinets for the electrical euthanasia of CPL/61/8 confirmed (2008) Reconfirmation dogs BS 2930:1970 Specification for surgical spring trusses CH/168 obsolescent (2009) Withdrawal BS :2008 Sampling and analysis of glass-making sands -- Methods for chemical analysis BS 2992:1970 Specification for painters' and decorators' brushes for local authorities and public institutions (excluding quality of fillings) BS 2F 127:1991 Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes LBI/1/2 current Confirmation CW/11 confirmed (2008) Reconfirmation ACE/65 confirmed (2008) Reconfirmation BS 2F 132:2002 BS 2F 134:2002 Braided nylon cord with specified dimensional stability for aerospace purposes Continuous filament polyester sewing thread suitable for aerospace purposes ACE/65 confirmed (2008) Reconfirmation ACE/65 confirmed (2008) Reconfirmation Updated Nov of 43

5 BS 2F 142:1999 BS 2G 100-2:1962 Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes Specification for general requirements for electrical equipment and indicating instruments for aircraft -- Environmental and operating conditions BS 2M 54:1991 Specification for temperature control in the heat treatment of metals BS 2S 510:1970 Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding) BS 2S 511:1970 Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding) ACE/65 confirmed (2008) Reconfirmation ACE/6 partially replaced by a new revision (3G 100) in several Parts, Sections and Subsections Withdrawal ACE/61 obsolescent (2009) Withdrawal ACE/61/-/15 obsolescent (2010) Reconfirmation ACE/61/-/15 obsolescent (2010) Withdrawal BS 2S 514:1969 Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) ACE/61/-/15 obsolescent (2010) Reconfirmation BS 2SP 90:2008 Specification for corrosion-resisting steel split cotter pins ACE/12 current Confirmation for aircraft. Inch series BS 2X 35:2003 Selectively removable intermediate coating for aerospace purposes ACE/65/-/3 confirmed (2008) BS 3031:1996 Specification for sulfuric acid used in lead-acid batteries BS 3043:1973 Specification for storage envelopes for processed X-ray I/- current Withdrawal films for medical radiography BS 3047:1988 Specification for sizes of posters I/- current Withdrawal BS 3072:1989 Specification for nickel and nickel alloys: sheet and plate BS 3075:1976 Specification for nickel and nickel alloys: wire BS 3076:1989 Specification for nickel and nickel alloys: bar BS 31:1940 Specification. Steel conduit and fittings for electrical PEL/213 obsolescent (2011) wiring BS 3129:1959 Specification for latex foam rubber components for PRI/71 obsolescent (2010) Withdrawal furniture BS 3157:1960 Specification for latex foam rubber components for PRI/71 obsolescent (2011) Withdrawal transport seating BS 3175:1959 Specification for pentachlorophenol BS 3193:2008 Specification for thermally toughened glass panels for CW/1 current Confirmation use in domestic appliances BS :1988 Lighting fittings for civil land aerodromes. -- EPL/97 confirmed (2008) Reconfirmation Specification for inset lighting units BS 3227:2003 Butyl rubber compounds (including halobutyl PRI/54 confirmed (2008) compounds). Specification BS 3241:1960 Specification for toughened polystyrene for sheet PRI/82 confirmed (2008) Reconfirmation extrusion BS 3271:1970 Specification for surgical elastic band trusses CH/168 obsolescent (2009) Reconfirmation BS 3282:1969 Glossary of terms relating to gas chromatography I/- current Withdrawal BS :1989 Insulator and conductor fittings for overhead power lines -- Dimensions of ball and socket couplings of string insulator units PEL/11 obsolescent (2008) Reconfirmation BS 3348:1961 Specification for antral trocars and cannulae CH/170 obsolescent (2011) Withdrawal BS :1995 Management services -- Guide to organization study. MS/1 confirmed (2008) Reconfirmation BS :1993 Management services -- Guide to method study MS/1 confirmed (2008) Reconfirmation BS :1993 Management services -- Guide to work measurement MS/1 confirmed (2008) Reconfirmation BS :1993 Management services -- Guide to work performance control MS/1 confirmed (2008) Reconfirmation Updated Nov of 43

6 BS :1997 Management services -- Guide to determination of exposure limits, recovery times and relaxation times in work measurement MS/1 confirmed (2008) Reconfirmation BS 3399:1961 Specification for transformers for use in ships PEL/14 obsolescent (2008) withdrawal BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water BS :1982 Testing coated fabrics -- Methods 7A, 7B and 7C. Methods for determination of tear strength BS :1983 Testing coated fabrics -- Methods 10A, 10B and 10C. Methods for determination of low temperature performance BS 3441:1995 BS 3454:1995 Specification for tanks for the transport of milk and liquid milk products Specification for 1.9/3.3 kv, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines STI/27 confirmed (2008) Reconfirmation TCI/69 TCI/69 partially replaced by BS EN ISO :2003 partially replaced by BS EN :1998 and BS EN :1998 withdrawal withdrawal AW/22 obsolescent (2011) Withdrawal MRE/3 confirmed (2008) Reconfirmation BS 3455:1973 Glossary of terms used in nuclear science and NCE/2 obsolescent (2010) Withdrawal technology BS 3463:1975 Specification for observation and gauge glasses for PSE/18/6 confirmed (2008) Reconfirmation pressure vessels BS :1991 Methods of test for desiccants -- Sampling, and preparation and storage of test samples BS :1991 Methods of test for desiccants -- Determination of bulk density (dry basis) BS :1991 Methods of test for desiccants -- Determination of friability and dust content BS :1991 Methods of test for desiccants -- Determination of moisture content BS :1991 Methods of test for desiccants -- Determination of ph BS :1991 Methods of test for desiccants -- Determination of watersoluble chlorides content BS :1991 Methods of test for desiccants -- Determination of watersoluble sulphates content BS :1991 Methods of test for desiccants -- Determination of adsorptive capacity BS :1991 Methods of test for desiccants -- Determination of particle size BS :1991 Methods of test for desiccants -- Estimation of ammonia and ammonium compounds content BS :1991 Methods of test for desiccants -- Determination of cobalt chloride content BS :1990 Methods for testing pigments for paints -- General STI/1 confirmed (2008) Reconfirmation introduction BS :1991 Record inks. -- Specification for blue-black inks I/- current Confirmation BS :1994 Record inks. -- Specification for permanent inks I/- current Confirmation BS 3504:1962 BS 3505:1986 BS 3522:1962 BS 3523:1991 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves Specification for unplasticized polyvinyl chloride (PVC- U) pressure pipes for cold potable water Specification for hypodermic surgical mounted needles (Luer fitting) Specification for granular desiccant silica gel impregnated with cobalt chloride PRI/88 replaced by BS EN :1999, BS EN :1999, BS EN :1999, BS EN :1999 and BS EN :1999 Reconfirmation CH/84 obsolescent (2008) Withdrawal Updated Nov of 43

7 BS 3575:1963 BS 3598:1998 BS :1976 Specification for rivets for the attachment of friction linings Fissile materials. Criticality safety in handling and processing. Recommendations Methods for the sampling and analysis of zinc and zinc alloys -- Nickel in zinc alloys (photometric method) FME/9 obsolescent (2010) Withdrawal NCE/9 confirmed (2008) Reconfirmation NFE/8 confirmed (2008) Reconfirmation BS 3664:1963 BS 3668:1963 BS :1968 Specification for film badges for personnel radiation monitoring Specification for red and green filters used in ophthalmic dichromatic and dissociation tests Specification for spring retaining rings -- Carbon steel circlips NCE/2 obsolescent (2010) Withdrawal CH/172 confirmed (2008) Reconfirmation FME/9 replaced by BS :1977 Withdrawal BS 3698:1964 Specification for calcium plumbate priming paints STI/27 confirmed (2008) Reconfirmation BS 3710:1964 BS :1966 BS :1964 BS :1965 BS :1970 BS :1965 BS :1964 BS :1968 BS :1966 BS :1968 BS :1966 Specification for brake hose couplings for locomotives and rolling stock Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of aluminium (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of silicon per cent (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of silicon per cent (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of sulphur (combustion method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of titanium (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of tungsten (gravimetric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of zinc (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of combined and free magnesium Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of boron (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Spectrographic method GSE/42 obsolescent (2008) Withdrawal BS :1966 BS :1966 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of magnesium (atomic absorption method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of zinc (atomic absorption method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of carbon EPL/39 obsolescent (2008) Withdrawal BS :1964 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of chromium (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of cobalt (photometric method) Updated Nov of 43

8 BS :1964 BS :1964 BS :1964 BS :1967 Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of copper (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of iron (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of manganese (photometric method) Methods for the analysis of nickel for use in electronic tubes and valves -- Determination of magnesium (photometric method) BS 3728:1982 Specification for size designation of children's and TCI/66 confirmed (2008) Reconfirmation infants' wear BS 373:1957 Methods of testing small clear specimens of timber B/518 confirmed (2008) Reconfirmation BS :1991 BS :1986 BS :1986 BS :1986 BS :1986 BS :1986 BS 3769:1964 BS 3770:1964 BS 3775:1964 BS :1964 BS :1965 Analysis of formulated detergents -- General introduction Analysis of formulated detergents -- Method for determination of chlorine oxidizing agents content Analysis of formulated detergents -- Methods for determination of total organic matter content Analysis of formulated detergents -- Method for determination of matter soluble in light petroleum Analysis of formulated detergents -- Method for determination of total non-ionic matter content Analysis of formulated detergents -- Method for determination of alkanolamides content Specification for copper naphthenate and copper naphthenate concentrates Specification for zinc naphthenate and zinc naphthenate concentrates Specification for counting trays (planchets) for radioactive assay Glossary of terms used in materials handling -- Terms used in connection with pallets, stillages, hand and powered trucks Glossary of terms used in materials handling -- Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) CII/34 confirmed (2008) Reconfirmation CII/34 confirmed (2008) Reconfirmation CII/34 confirmed (2008) Reconfirmation CII/34 confirmed (2008) Reconfirmation CII/34 confirmed (2008) Reconfirmation CII/34 confirmed (2008) Reconfirmation NCE/2 obsolescent (2010) Withdrawal MHE/7 obsolescent (2010) Withdrawal MHE/9 obsolescent (2008) Withdrawal BS :1967 BS :1968 BS :1971 BS :1973 BS :1973 Glossary of terms used in materials handling -- Terms used in connection with pneumatic and hydraulic handling Glossary of terms used in materials handling -- Terms used in connection with cranes Glossary of terms used in materials handling -- Terms used in connection with lifting tackle Glossary of terms used in materials handling -- Terms used in connection with pulley blocks Glossary of terms used in materials handling -- Terms used in connection with aerial ropeways and cableways MHE/7 obsolescent (2008) Withdrawal MHE/3/1 obsolescent (2010) Withdrawal MHE/7 obsolescent (2008) Withdrawal MHE/7 obsolescent (2008) Withdrawal MHE/7 obsolescent (2008) Withdrawal BS :1975 BS :1975 BS 3839:1978 Glossary of terms used in materials handling -- Terms used in connection with lifts, lifting platforms and inclined haulages Glossary of terms used in materials handling -- Terms used in connection with rail transport Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices MHE/7 obsolescent (2008) Withdrawal MHE/7 obsolescent (2008) Withdrawal Updated Nov of 43

9 BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films NCE/2 obsolescent (2010) withdrawal BS 3900-A11:1974 BS 3900-A5:1991 BS 3900-B15:1987 BS 3900-C1:1965 BS 3900-E7:1974 BS 3900-E8:1974 BS 3900-F10:1985 Methods of test for paints. Tests on liquid paints (excluding chemical tests) -- Small scale test for combustibility Methods of test for paints. -- Large-scale brushing tests for paints and varnishes Methods of test for paints. -- Rapid method for estimation of lead in liquid paints Methods of test for paints. Tests associated with paint film formation -- Wet edge time Methods of test for paints. -- Resistance to impact (falling ball test) Methods of test for paints. -- Resistance to impact (pendulum test) Methods of test for paints. -- Determination of resistance to cathodic disbonding of coatings for use in marine environments BS 3900-F11:1985 Methods of test for paint. Durability tests on paint films -- Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation BS 3900-F2:1973 Methods of test for paint. Durability tests on paint films -- Determination of resistance to humidity (cyclic condensation) BS 3900-F4:1968 BS 3900-F5:1972 BS 3900-G6:1989 BS :1989 Methods of test for paints -- Resistance to continuous salt spray Methods of test for paints. -- Determination of light fastness of paints for interior use exposed to artificial light sources Methods of test for paints. -- Assessment of resistance to fungal growth Methods for the sampling and analysis of lead and lead alloys -- Antimony in lead alloys (titrimetric method) STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation STI/10 confirmed (2008) Reconfirmation NFE/22 confirmed (2008) Reconfirmation BS :1970 BS :1967 BS :1971 Methods for the sampling and analysis of lead and lead alloys -- Antimony in lead and lead alloys (low contents) (photometric method) Methods for the sampling and analysis of lead and lead alloys -- Arsenic in lead and lead alloys (photometric method) Methods for the sampling and analysis of lead and lead alloys -- Tellurium in lead and lead alloys (photometric method) NFE/22 confirmed (2008) Reconfirmation NFE/22 confirmed (2008) Reconfirmation NFE/22 confirmed (2008) Reconfirmation BS :1991 Methods for the sampling and analysis of lead and lead NFE/22 confirmed (2008) Reconfirmation alloys -- Sulphur in lead and lead alloys BS 3909:1965 Specification for ingot lead for radiation shielding NFE/22 confirmed (2008) Reconfirmation BS :1972 Methods for ultrasonic examination of welds -- Automatic examination of fusion welded butt joints in ferritic steels BS 3924:1978 BS 3929:1965 Specification for pressure-sensitive adhesive tapes for electrical insulating purposes Specification for domestic solid fuel ignition pokers and portable undergrate ignition burners for use with commercial butane WEE/46 obsolescent (2009) withdrawal GEL/15 partially replaced by Parts of BS EN Withdrawal RHE/28 obsolescent (2009) withdrawal BS :1992 Nursery stock -- Specification for trees and shrubs AW/1 confirmed (2008) Reconfirmation BS :1984 Nursery stock -- Specification for container-grown culinary herbs AW/1 confirmed (2008) Reconfirmation Updated Nov of 43

10 BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry CH/212 confirmed (2008) Reconfirmation BS 3988:1970 BS 3F 135:2002 BS 3G 100-3:1979 BS 3G :1973 Specification for wrought aluminium for electrical purposes. Solid conductors for insulated cables Braided nylon cord with unspecified dimensional stability for aerospace purposes Specification for general requirements for equipment for use in aircraft. -- Characteristics of aircraft electrical power supplies Specification for general requirements for equipment for use in aircraft. Electrical equipment -- Construction and general NFE/35 confirmed (2008) Reconfirmation ACE/65 confirmed (2008) Reconfirmation ACE/6 obsolescent (2009) Withdrawal ACE/58 obsolescent (2008) Withdrawal BS 4024:1966 Specification for pentachlorophenyl laurate BS :1995 BS 4164:2002 BS :1999 Carpet cleaning products. Methods of sampling and test -- General methods for impregnated powder formulations Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer Hand-held pressurized aerosol dispensers against houseflies -- Specification for insecticidal performance I/- current Withdrawal ISE/110 confirmed (2008) Withdrawal I/- current Confirmation BS :1999 Hand-held pressurized aerosol dispensers against houseflies -- Method for determination of insecticidal performance I/- current Confirmation BS 4211:2005+A1:2008 Specification for permanently fixed ladders B/208/1 current Confirmation BS :1974 Methods of test for seats on agricultural wheeled tractors. -- Tests on artificial track BS :1981 Surface materials for use in radioactive areas. -- Methods of measuring and evaluating the decontamination factor BS :1982 BS :1986 BS 4257:1967 Surface materials for use in radioactive areas. -- Guide to the selection of materials Rubber used in preformed gaskets for weather exclusion from buildings -- Specification for non-cellular gaskets Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment. AGE/6 obsolescent (2010) Withdrawal NCE/2 obsolescent (2010) withdrawal NCE/2 obsolescent (2010) withdrawal PRI/73 confirmed (2008) Reconfirmation EPL/51 obsolescent (2008) Withdrawal BS 4300/10:1969 Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) Drawn tube NFE/35 confirmed (2008) Reconfirmation BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008) BS :1969 Joints and fittings for use with unplasticized PVC pressure pipes -- Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply PRI/88 replaced by BS EN :1999, BS EN :1999, BS EN :1999, BS EN :1999 and BS EN :1999 Reconfirmation BS :1970 Joints and fittings for use with unplasticized PVC pressure pipes -- Mechanical joints and fittings, principally of unplasticized PVC PRI/88 replaced by BS EN :1999, BS EN :1999, BS EN :1999, BS EN :1999 and BS EN :1999 Withdrawal BS 437:2008 Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems BS :1988 Methods of test for rigid cellular materials -- Methods 1 to 5 PSE/10 current Confirmation PRI/24 obsolescent (2011) withdrawal Updated Nov of 43

11 BS :1988 Methods of test for rigid cellular materials -- Methods 12 PRI/24 confirmed (2008) Reconfirmation and 13 BS :1991 Methods of test for rigid cellular materials -- Method 14. PRI/24 confirmed (2008) Reconfirmation Determination of flexural properties BS :1991 Screw conveyors -- Specification for fixed trough type MHE/9 confirmed (2008) Reconfirmation BS :1991 BS 442:1950 BS :1988 Screw conveyors -- Specification for portable and mobile type (augers) Specification for terminals for electrical apparatus for railway signalling purposes Methods of test for flexible cellular materials -- Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance MHE/9 confirmed (2008) Reconfirmation GEL/9 confirmed (2008) Reconfirmation PRI/24 partially replaced by BS EN ISO 4651:1995+A1:2008 withdrawal BS :1992+A1:2008Methods of test for flexible cellular materials -- Method 17. Determination of tear strength of flexible cellular material with an integral skin BS :1976 BS :1976 Digital data transmission -- Complements to the basic mode control procedures; recovery, abort and interrupt, multiple station selection PRI/24 confirmed (2008) Reconfirmation IST/6 obsolescent (2008) Withdrawal Digital data transmission -- Basic mode control IST/6 obsolescent (2008) Withdrawal procedures; conversational information message transer BS :2009 Specification for welding of steel pipelines on land and offshore -- Carbon and carbon manganese steel pipelines WEE/21/7 current Confirmation BS 4532:1969 Specification for snorkels and face masks SW/136 confirmed (2008) Reconfirmation BS :1997 Guide to quality control requirements for reinforced plastics mouldings -- Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings PRI/42 confirmed (2008) Reconfirmation BS 456:1961 Specification for dimensions of track circuit insulation GEL/9 obsolescent (2010) Withdrawal BS 4569:1983 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface TCI/66/-/8 confirmed (2008) BS 4578:1970 BS :2008 Specification for methods of test for hardness of, and for air flow through, infants' pillows Industrial type flooring and stair treads -- Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers. Specification TCI/66 confirmed (2008) Reconfirmation B/208/1 current Confirmation BS 460:2002+A2:2007 Cast iron rainwater goods. Specification PSE/10 confirmed (2008) Reconfirmation BS 4603:1970 Method for determination of residue on ignition or ash of chemical products BS 4618:Introduction:197 design data -- General introduction BS :1970 design data. Mechanical properties -- Creep in uniaxial tension or compression (with particular reference to solid plastics) BS :1976 BS :1970 BS :1972 I/- current Confirmation design data. Mechanical properties -- Creep in flexure at low strains design data. Mechanical properties -- Creep design data. Mechanical properties -- Impact behaviour BS :1975 design data. Mechanical properties -- Static fatigue failure Updated Nov of 43

12 BS :1976 BS :1975 BS :1970 BS :1970 BS :1975 design data. Mechanical properties -- Environmental stress cracking design data. Mechanical properties -- Strength design data. Electrical properties -- Permittivity design data. Electrical properties -- Loss tangent design data. Electrical properties -- Volume resistivity BS :1975 design data. Electrical properties -- Surface resistivity BS :1970 BS :1973 BS :1973 design data. Thermal properties -- Linear thermal expansion design data. Thermal properties -- Heat content design data. Thermal properties -- Thermal conductivity BS :1972 BS :1972 BS :1973 BS :1974 design data. Environmental and chemical effects -- Chemical resistance to liquids design data. Environmental and chemical effects -- Resistance to natural weathering design data. Environmental and chemical effects -- The effect of marine exposure design data. Environmental and chemical effects -- The effect on plastics of soil burial and biological attack PRI/21 obsolescent (2009) withdrawal PRI/21 obsolescent (2009) withdrawal PRI/21 obsolescent (2009) withdrawal PRI/21 obsolescent (2009) withdrawal BS :1970 BS :1970 BS :1972 BS :1972 BS :1974 BS :1975 design data. Other properties -- Density design data. Other properties -- Change in linear dimensions with moisture absorption design data. Other properties -- Optical properties design data. Other properties -- Acoustical properties (mechanical damping capacity) design data. Other properties -- Data on diffusion design data. Other properties -- Guide to sliding friction PRI/21 obsolescent (2009) withdrawal BS 4620:1970 Specification for rivets for general engineering purposes FME/9 obsolescent (2010) Withdrawal BS 4622:1970 Specification for grey iron pipes and fittings PSE/10 obsolescent (2009) Withdrawal BS 4623:1989 Specification for folded continuous stationery for impact printers BS 4630:1970 Specification for tributyltin oxide (di(tributyltin) oxide) BS 4642:1970 Glossary of industrial furnace terms E/- current Withdrawal BS 4652:1995 Specification for zinc-rich priming paint (organic media) STI/27 confirmed (2008) Reconfirmation Updated Nov of 43

13 BS :1970 Specification for paper covered copper conductors -- Rectangular conductors BS :1971 Guide to hazards in the transport and storage of packages -- Climatic hazards BS :1971 Guide to hazards in the transport and storage of packages. -- Climatic hazards (maps and diagrams) GEL/55 obsolescent (2008) Withdrawal PKW/0 obsolescent (2010) Reconfirmation PKW/0 obsolescent (2010) Reconfirmation BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008) BS 4723:2002 Stretch covers for upholstered furniture. Specification TCI/66 confirmed (2008) Reconfirmation BS :Group 10:1985Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering -- Industrial electroheating terminology GEL/1 confirmed (2008) Reconfirmation BS :2009 BS 4781:1990 BS :1972 BS :1972 BS 4842:1984 Fire tests on building materials and structures -- Guide to the principles, selection, role and application of fire testing and their outputs Specification for pressure-sensitive adhesive plastics labels for permanent use Specification for varnish-bonded glass-lapped copper conductors -- Round wire Specification for varnish-bonded glass-braided copper conductors -- Rectangular conductors Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings FSH/21 current Confirmation I/- current Confirmation GEL/55 obsolescent (2008) Withdrawal GEL/55 obsolescent (2008) Withdrawal STI/27 confirmed (2008) Reconfirmation BS 4877:1972 BS 490-2:1975 Recommendations for general principles of nuclear reactor instrumentation Conveyor and elevator belting -- Rubber and plastics PRI/67 belting of textile construction for use on bucket elevators NCE/8 confirmed (2008) Revision in progress partially replaced by Sections 1 to 7 of BS and BS ISO 251:2003 withdrawal BS 4926:1973 Specification for dichlorophen BS :1974 BS :1994 BS :1994 Specification for paper-, cotton-, silk- or rayon-covered copper conductors -- Round wire Technical information on construction products and services -- Guide for management Technical information on construction products and services -- Guide to content and arrangement GEL/55 obsolescent (2008) Withdrawal B/555 confirmed (2008) Reconfirmation B/555 confirmed (2008) Reconfirmation BS :1994 Technical information on construction products and B/555 confirmed (2008) Reconfirmation services -- Guide to presentation BS :1973 Specifications for di-isobutyl phthalate, di-isooctyl phthalate, di-isooctyl sebacate BS 4971:2002 Repair and allied processes for the conservation of IDT/2/9 confirmed (2008) documents. Recommendations BS 4974:1975 Specification for water for lead-acid batteries I/- current Confirmation BS 499-1:2009 BS 4994:1987 Welding terms and symbols -- Glossary for welding, brazing and thermal cutting Specification for design and construction of vessels and tanks in reinforced plastics WEE/1 current Confirmation PRI/5 replaced by BS EN 13923:2005 and BS EN :2008+A1:2010 Withdrawal BS 5061:1974 Specification for cylindrical forage tower silos and B/549 obsolescent (2009) Withdrawal recommendations for their use BS 5073:1982 Guide to stowage of goods in freight containers TW/1 confirmed (2008) BS :1993 Structural fixings in concrete and masonry -- Method of test for tensile loading B/514 confirmed (2008) Reconfirmation Updated Nov of 43

14 BS :1986 Structural fixings in concrete and masonry -- Method for determination of resistance to loading in shear B/514 confirmed (2008) Reconfirmation BS :1974 BS 5114:1975 Specification for loose leaf binders -- Ring binders with metal mechanisms Specification for performance requirements for joints and compression fittings for use with polyethylene pipes I/- current Withdrawal PRI/88 obsolescent (2009) Withdrawal BS :1992 BS :1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze') -- General introduction Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties -- Ancillary procedures I/- current Withdrawal BS :1985 BS :1985 BS :1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties -- Determination of boiling point Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. -- Determination of freezing point Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. -- Determination of foaming characteristics I/- current Confirmation I/- current Confirmation I/- current Withdrawal BS :1992 BS :1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties -- Coolant hard water stability test Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. -- General procedures I/- current Confirmation BS :1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance -- Glassware tests I/- current Withdrawal BS :1985 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. -- Static engine test I/- current Withdrawal BS :1985 BS :1992 Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. -- Field test Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance -- Test for corrosion of cast aluminium alloys under heat-transfer conditions I/- current Withdrawal I/- current Confirmation BS 5176:2003 Classification system for vulcanized rubbers. PRI/54 confirmed (2008) Reconfirmation Specification BS 5237:1985 Specification for lifting twistlocks TW/1 confirmed (2008) Reconfirmation BS 5254:1976 Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) PRI/88 replaced by BS EN :2000 Reconfirmation BS :1977 BS :1976 Pressure vessel details (dimensions) -- Standardized pressure vessels Methods for sampling chemical products -- Introduction and general principles PVE/1 obsolescent (2010) withdrawal Updated Nov of 43

15 BS :1976 BS :1976 BS :1976 BS 5332:1982 BS 5336:1976 BS 5338:1976 BS :1997 BS :1976 Methods for sampling chemical products. -- Sampling of gases Methods for sampling chemical products. -- Sampling of liquids Methods for sampling chemical products. -- Sampling of solids Specification for data elements for the generation and exchange of serials records Specification. Cores made of ferromagnetic oxides for use in high flux density transformers Code of practice for zinc alloy pressure die casting for engineering Code of practice for oil firing -- Installations up to 45 kw output capacity for space heating and hot water supply purposes Code of practice for oil firing -- Installations for furnaces, kilns, ovens and other industrial purposes IDT/2/7 obsolescent (2008) Withdrawal EPL/51 obsolescent (2011) Withdrawal NFE/8 confirmed (2008) Reconfirmation RHE/13 confirmed (2008) Reconfirmation RHE/13 confirmed (2008) Reconfirmation BS 5412:1996 BS :1996 BS 5431:1976 BS 5438:1976 BS 5438:1989 Specification for low-resistance single taps and combination tap assemblies (nominal size $9H and $9L) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar) Code of practice for the use of profiled sheet for roof and wall cladding on buildings -- Design Specification for bending springs for use with copper tubes for water, gas and sanitation Methods of test for flammability of vertically oriented textile fabrics and fabric assemblies subjected to a small igniting flame Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens B/504 replaced by BS EN 200:2008 and has been declared obsolescent Withdrawal B/542/6 confirmed (2007) Revision in progress NFE/34 confirmed (2008) Reconfirmation TCI/66/-/8 confirmed (2008) Reconfirmation TCI/66/-/8 confirmed (2008) Withdrawal BS 5444:2008 Physical attributes of documents for microfilming or IDT/1/2 current Confirmation scanning. Code of practice BS :2003 Fire detection and fire alarm devices for dwellings -- FSH/12/2 confirmed (2008) Reconfirmation Specification for heat alarms BS 545:1982 Specification for bevel gears (machine cut) MCE/5 current Withdrawal BS 5477:1977 Method for visual assessment, by grid assay, of dirt in paper for character recognition IST/12 obsolescent (2008) Reconfirmation BS :2003+A1:2008Code of practice for the design of road lighting -- Lighting of tunnels EL/1/2 current BS 5498:1977 Specification for the safety of hand operated paper I/- current Confirmation cutting machines BS 5537:1991 Guide to forms design sheet and layout chart I/- current Withdrawal BS :2000 Cinematography. Production and presentation. Sound -- Subsection 7.4.2: Sound - Specification for maximum recording levels for commercials and trailers. CPW/36 confirmed (2008) Reconfirmation BS 5561:1979 Specification for spools for copper wire NFE/34 confirmed (2008) Reconfirmation BS 5576:1998 Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings SW/136/11 obsolescent (2011) withdrawal BS 5651:1978 Cleansing and wetting procedures for use in the TCI/66/-/8 confirmed (2008) Reconfirmation assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies BS 5651:1989 Method for cleansing and wetting procedures for use in TCI/66/-/8 confirmed (2008) Withdrawal the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies Updated Nov of 43