Department of Biochemistry University of Lucknow Lucknow

Size: px

Start display at page:

Download "Department of Biochemistry University of Lucknow Lucknow"

Arnold Tate
5 years ago
Views:

1 Department of Biochemistry University of Lucknow Lucknow TENDER NO.: LU-Biochem COE/001/2017 Dated: September 20, 2017 Short term Tender/Bid invited for Construction/fabrication of an airconditioned polyhouse for plant growth, required for U.P. State Government funded Centre of Excellence in Biochemistry, operating in the Department of Biochemistry, University of Lucknow, Lucknow. Non transferable

2 Department of Biochemistry University of Lucknow Lucknow TENDER NO.: LU-Biochem COE/001/2017 Dated: September 20, 2017 Sealed, Short term Tender/Bid is invited from registered, experienced & reputed firms under two bid system i.e. Technical Bid & Financial Bid for construction/fabrication of air conditioned polyhouse required for U.P. State Government funded Centre of Excellence in Biochemistry for establishment of an upgradeable facility for proteomics, operating in the Department of Biochemistry, University of Lucknow, Lucknow. Separate tenders are invited for each of the equipment. 1. Detailed description of various items required along with specifications (Please see Annexure I) 2. Time Schedule: Date of downloading of Bid document: Last Date & Time for receipt of tenders: at 12:00 noon. Date & Time for opening of Bid: at 12:30 P.M. Place of opening of bid: Department of Biochemistry, University of Lucknow, Lucknow. Place of deposit of tender: Departmental drop box, Department of Biochemistry, University of Lucknow, Lucknow. 3. Cost of tender Form: Rs in form of bank draft in favour of Finance Officer, University of Lucknow payable at Lucknow must be enclosed with tender form. Cost of tender form is Non-refundable. 4. Validity of Tender: 60 days from the date of opening of tender. 5. Interested firms may submit the documents, complete in all respects, along with Earnest Money Deposit (EMD) of Rs. 15, (Rupees fifteen thousand only) in the name of Finance Officer, University of Lucknow, Lucknow in form of bank draft only or FD certificate. 6. The University of Lucknow, reserves the right to amend or withdraw any of the terms and conditions contained in tender document or to reject any or all tenders without giving any notice or assigning any reason. The decision of University of Lucknow in this regard shall be final and binding on all. Prof. S.K. Agarwal Coordinator, COE in Biochemistry, Department of Biochemistry For Registrar, University of Lucknow, Lucknow

3 Tender Form The bidders should furnish the under mentioned information and also enclose the copy of the respective document as mentioned below failing which their bids will not be considered. 1. Name of the Firm (Full Address) 2. Name of the Proprietor 3. Telephone / Mobile Number 4. Bank Account Number 5. Income Tax Permanent Account Number (Please enclose photocopy) 6. Registration with Trade Tax (U.P.): Trade Tax Reg. No. C.S.T. No. ST / VAT No. TIN No. 7. Income Tax Return for the past 3 year. (Please enclose photocopy) 8. Firm deed & Registration of the firm: (Please enclose photocopy) 9. Proprietary certificate 10. (a) Demand Draft towards the cost of the Tender Form: Draft No. Name of the issuing Bank Date Amount Rs. 1000/- (b) Demand Draft for the Earnest Money Deposit (EMD): Draft No. Name of the issuing Bank and date Draft Amount Rs. 15, (Rupees fifteen thousand only). Demand Draft should be drawn in favour of Finance Officer, University of Lucknow, Lucknow, payable at Lucknow. Tenders/Technical Bids not accompanied by the requisite Demand Drafts shall not be considered and shall be rejected.

4 Instructions to Bidders & Pre-qualification Requirement of Bidders 1. Capacity The firm should be capable of mobilizing adequate arrangement for the supply (separately) of Fabrication of polyhouse suitable for plant growth under controlled conditions of light and temperature, required for U.P. State Govt. funded Centre of Excellence in Biochemistry for Establishment of an Upgradeable Facility for Proteomics, operating in the Department of Biochemistry, University of Lucknow, Lucknow. 2. Penalty 10% of the value of the order shall be imposed for every day of delay in the supply of the full order or commissioning of polyhouse complete in every respect. 3. Arbitration In case of any dispute, the decision of University of Lucknow shall be binding. University of Lucknow has the right to cancel all or any of the tenders without assigning any reason. 4. Legal Jurisdiction For legal dispute, if any, the jurisdiction will be limited to the District of Lucknow. 5. Rates quoted by the firms (L 1) are negotiable, FOR Lucknow. 6. Technical and financial bids, duly signed and stamped, to be kept separately in sealed envelopes. The envelope containing bids be marked on top as Technical/Financial bids for Construction of polyhouse suitable for plant growth under controlled conditions of light and temperature required in the Department of Biochemistry, University of Lucknow. Proprietary certificate, wherever applicable, must be enclosed with the technical bid. Separate bids under separate sealed covers must be made for polyhouse construction. 7. Tender should be addressed to Coordinator, COE in Biochemistry, Department of Biochemistry, University of Lucknow, Lucknow With tender form, specifications of equipment or item supplied must be written, sealed and signed by the authorized signatory. 9. Polyhouse must be as per given specifications. 10. Quantity to be supplied and work to be completed may change at the time of order. 11. Non-compliance of order, in time, will be treated as non-compliance of the terms and conditions. 12. No advance amount will be given. 13. Without assigning any reason any tender or all tenders can be cancelled by the University authorities at any stage. 14. Affidavit will be given by the tenderer that they will follow the all mentioned terms and conditions. 15. Payment will be made to the firms after successful installation of equipment or commissioning of a functional polyhouse, after deducting the Sales tax, Stamp Duty and Income Tax, if applicable through the Finance & Accounts office of the University of Lucknow. Prof. S.K. Agarwal Coordinator, COE in Biochemistry, Department of Biochemistry For Registrar, University of Lucknow, Lucknow

5 Annexure 1 Specifications for air-conditioned polyhouse to be constructed at the Department of Biochemistry, University of Lucknow Dimensions: 1. Built area of approximately 340 sq. ft. 2. No. of chambers: 1 (one) plus one pre-entry room. Single dome, even span. 3. Size of chamber: 20 ft x 16 ft (L x W) with central height of 11 ft and side height of 8 ft 4. Pre-entry room size: 4 ft x 4 ft (L x W) with 8 ft height Doors: 6 ft x 3 ft with hinges and control (locking). One each for pre-entry room and polyhouse respectively. Bricks and mortar (masonry) structure: Boundary wall 3 feet above ground, plus 1 ft foundation. The metal and PC structure must rise from these walls. The inside should have floor tiles on a proper foundation with waterproof joints. The chamber will be used for plant growth and therefore provisions must be made for proper slope and drainage system to ensure water disposal from plant irrigation. Super structure (polyhouse): Galvanised steel as per IS 875 standards. Pipe sections to be used for different structural members should be as below or equivalent: a. Columns: 80mm x 50mm in 2 mm thick hot-dip galvanized pipe b. Trusses: bottom cord 30mm x 2mm; truss members 48mm x 48mm x 2mm; bracing 25mm pipe structural member will be fitted with zinc plated nuts and bolts without welding. c. Purlins: 30mm x 2mm thick All GI pipes must be galvanized Glazing: All sides and top to be covered with UV stabilized, double wall, transparent polycarbonate (PC) sheet (SABIC LEXAN USA or Bayer) with at least 80% transmission. Sheets must be fixed to roof and sides firmly. The sheet fixing and all joints must be completely waterproof and should be able to withstand strong winds as during a thunderstorm. The polycarbonate sheet should be fixed to the purlins with anodized aluminum strapping with proper insulating material and Geeignet gaskets. The exact specifications of sheet and metal structure should be clearly mentioned in detail. There must be a warranty on discoloration of PC sheet and of all joints against leakage.

6 Roof Screen: Net screen should be provided to deduct 25 to 30% of light intensity with arrangements for folding and retraction-redeployment. Water points: External water supply (existing water supply of the Department of Biochemistry) must be connected to at least two points inside the polyhouse. One of which should be provided with a steel sink and drain board and the other to a small garden tap given at a height of 2.5 ft with a cordoned area on the floor to contain water spills. This area should be provided with a drain, and connected to the area allocated for plant growth racks. Water discharge from plant irrigation should be also fed into a common drain and not allowed to stagnate inside the polyhouse. Air conditioning: The polyhouse must be equipped with two air conditioners of 2 ton rating (each with independent stabilizer, each capable of cooling the polyhouse to 25 o C separately. The air-conditioners must run in tandem (one at a time) and a switching device/sequential timer should be installed to switch one AC while switching off the other. The changeover timing should be adjustable/programmable. Temperature control should have an accuracy of ±1 o C with digital two set points. The air conditioning system should include heating capabilities to ensure constant temperature during winters. Humidification system: Poly house humidity should be controlled by Ultrasonic humidifier capable of maintaining upto 90% humidity water droplet as small as 5-10 microns with instant start no thermal losses, automatic water selection system, auto off in case of non-availability of water, low power consumption, adjustable water tank position. Lighting: The polyhouse must be equipped with alternating rows of white (blue enriched) and yellow (Red enriched) LED lights (6 each). There must be contactless switching control to enable user to control the number and type of tube lights. Power points: The polyhouse must be fitted with six (6) power points (15 A) and 4 smaller power points (5 A) for using devices related to plant growth. The overall power supply to the polyhouse must be safe to meet international standards and power should be routed through switching gear and secure MCBs to prevent shock hazard and short circuiting. The wiring used should be of copper, and should exceed load expectations. All fittings and wiring must be fire resistant and ISI standard.

NIT NO. BSRDCL-2039/ TENDER DOCUMENT INSTALLATION, CONFIGURATION, TESTING, COMMISSIONING AND TRAINING OF SMOKE DETECTION FIRE ALARM SYSTEM

NIT NO. BSRDCL-2039/ TENDER DOCUMENT INSTALLATION, CONFIGURATION, TESTING, COMMISSIONING AND TRAINING OF SMOKE DETECTION FIRE ALARM SYSTEM NIT NO. BSRDCL-2039/2016-001 TENDER DOCUMENT INSTALLATION, CONFIGURATION, TESTING, COMMISSIONING AND TRAINING OF SMOKE DETECTION FIRE ALARM SYSTEM Last Date for sale of Tender Document: Upto 10.09.2016