Renew the air, prevent mold and save energy! ASPIRVELO AIR ECOCOMFORT

Transcription

1 Renew the air, prevent mold and save energy! ASPIRVELO AIR ECOCOMFORT The most complete range of single-room HRU

2 DAMP SMELLS MOLD EXHAUST AIR ASPIRVELO AIR ECOCOMFORT Prevent unwanted mold and damp saving money on your heating and A/C expenses How does it work? ECOCOMFORT is a de-centralized high efficiency heat recovery unit that ensures permanent ventilation of the dwelling with up to 90% efficiency. Thanks to the continous ventilation molds and damp can be prevented ensuring a good air quality. Ecocomfort is equipped with DC brushless motor with reverse ventilating cycle to ensure a continous air change. The intake air is filtered by a G3 filter easy to clean and to access for cleaning. Thanks to the ceramic heat exchanger the heat of the extracted air flowing through it is accumulated and transferred to the intake air when the flow is reversed. HIGH EFFICIENCY CERAMIC HEAT EXCHANGER EXTRACT AIR EXTERNAL GRILLE EASY TO INSTALL EITHER FROM INSIDE OR OUTSIDE TELESCOPIC BODY TO FIT EVERY WALL THICKNESS FLOW RECTIFIER ONLY FOR 160MM MODELS ENERGY SAVING UP TO 90% DC BRUSHLESS MOTOR LOW POWER CONSUMPTION G3 FILTER INTAKE AIR

3 FRESH AIR COMFORT ENERGY SAVING RF controlled or wired with wall mounting control box ECOCOMFORT is available in 2 versions: RF remote control suitable to manage up to 64 units and wired with wired wall mounting control unit to manage up to 4 units. Ø 160 and 100 mm ECOCOMFORT serie is available to fit 2 duct sizes: 100 mm suitable for rooms up to 22 sqm and 160 mm for rooms up to 50 sqm. In one system both models can be installed to fit the room size. 160 mm version is equipped with a flow rectifier to grant higher performances. Ø160 Up to 50 sqm Ø100 Up to 22 sqm Confort in any condition ECOCOMFORT RF is equipped with temperature, humidity and brightness sensors to adjust the fan speed according to the ambient conditions. NIGHT Mode detects automatically the light level in the room to reduce the fan speed during the night. Single room or multi room? Both! ECOCOMFORT is a flexible product to suit every installation. It can be used for 1 room ventilation or connecting several units among the 2 available diametres to build a multi-room ventilation system.

4 Easy to install ASPIRVELO AIR Ecocomfort must be installed on the external walls. Thanks to the telescopic body it fits easily every wall thickness between 24 and 58 cm. The external grille can be easily installed from outside or inside without the need of any scaffolding. INSTALLATION ON EXTERIOR WALL EXTERNAL GRILLE EASY TO INSTALL EITHER FROM INSIDE OR OUTSIDE TELESCOPIC ADAPTER TO SUIT DIFFERENT WALL THICKNESS MINIMUM LENGTH 24 CM, MAXIMUM LENGTH 58 CM 1 Drill a hole in the external wall 2 Insert the telescopic tube with the desired length 3 Insert the external grille 4 Insert the ceramic heat exchanger 5 Fix the fan to the wall and make the proper electrical connection 6 Fasten the front cover

5 A complete range to suit every need RF REMOTE CONTROL ASPIRVELO AIR ECOCOMFORT 100 RF - ECOCOMFORT 160 RF series ECOCOMFORT RF is an high efficiency decentralized heat recovery unit with RF remote control. The minimum configuration is the Master unit with the remote control to which ap to 64 slave units can be added. The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status. Thanks to the temperature, humidity and brightness sensors, ECOCOMFORT RF adjusts the fan speed according the ambient conditions ensuring the ideal comfort. MASTER heat recovery unit includes: heat recovery unit, telescopic body, grille and RF remote control Secondary heat recovery unit includes: heat recovery unit, telescopic body, grille MANUAL MODE SETTING: air intake, air extraction and alternate air intake / extraction AUTOMATIC MODE SETTING: The master ventilating unit regulates automatically adjusts air intake / extract cycles and the fan speed according to the roon / ambient conditions according to temperature, humidity and light brightness readings Remote control Heat recovery unit Complies with Reg. (UE) 1254/ SPEEDS: low, medium and high fan speed NIGHT MODE minimum fan speed Ø160 Ø100 OFF KEY SYSTEM SYSTEM STATUS REQUEST set mode and fan speed RF REMOTE CONTROL MASTER UNIT + SLAVE UNIT + SLAVE UNIT + SLAVE UNIT

6 WALL CONTROL UNIT ASPIRVELO AIR ECOCOMFORT ECOCOMFORT 160 series ECOCOMFORT is an high efficiency decentralized heat recovery unit with with a mechanical wall mounting control unit The control unit can be mounted on the wall or on a 3-module flush mounting box to control the fan speed, intake or extrraction cycle of up to 4 units. The knob allows to change the intake / extraction cycle according to the outdoor climate conditions. MASTER heat recovery unit includes: heat recovery unit with grille, telescopic body, control unit and 12Vdc feeder Secondary heat recovery unit includes: heat recovery unit, telescopic body, grille 2 SPEED: high, low and off fan speed MANUAL AND AUTOMATIC MODE SETTING air supply, air extraction and alternate cycle Control unit Heat recovery unit Complies with Reg. (UE) 1254/2014 SEASON SETTING: the unit alternate cycle according to the season or user needs Ø160 Ø CONTROL UNIT MASTER UNIT SLAVE UNIT SLAVE UNIT SLAVE UNIT

7 CHOOSE YOUR MODELS MASTER CODE MODEL Ø SQM speed m³/h W db(a) 1,5 mt AP19981 ECOCOMFORT 160 RF 160 mm 50 smq AP19987 ECOCOMFORT 100 RF 100 mm 22 smq AP19980 ECOCOMFORT mm 44 smq AP19984 ECOCOMFORT mm 20 smq SLAVE UNITS AP19982 ECOCOMFORT SAT 160 RF 160 mm 50 smq AP19988 ECOCOMFORT SAT 100 RF 100 mm 22 smq AP19979 ECOCOMFORT SAT mm 44 smq AP19985 ECOCOMFORT SAT mm 20 smq low 28 2,0 27 medium 48 3,8 32 high 68 6,6 38 sleep 15 nd nd low 8 2,0 18 medium 18 3,8 23 high 30 6,6 28 sleep 4 nd nd low 38 2,0 28 high 60 4,0 34 low 12 1,5 21 high 25 2,0 24 low 28 2,0 27 medium 48 3,8 32 high 68 6,6 38 sleep 15 nd nd low 8 2,0 18 medium 18 3,8 23 high 30 6,6 28 sleep 4 nd nd low 38 2,0 28 high 60 4,0 34 low 12 1,5 21 high 25 2,0 24 Dimensions (mm) MODEL A B C D E F G H I L ECOCOMFORT ECOCOMFORT SAT ECOCOMFORT ECOCOMFORT SAT N M Dimensions (mm) MODEL A B C D E F M N ECOCOMFORT 160 RF ECOCOMFORT SAT 160 RF ECOCOMFORT 100 RF ECOCOMFORT SAT 100 RF - - ACCESSORIES AP19986 KIT COMMISSIONING PHASE FOR Ø160 Useful kit during the commissioning phase in order to install the fan separately from the electrical / wall part. The KIT includes: telescopic body, external grille and outlet cover. AP19978 SPARE FILTER FR004 all ECOCOMFORT models

8 FANTINI COSMI SPA Via dell Osio, Caleppio di Settala MI, Italy Ph Fax EXPORT DEPARTMENT Ph BR-ASPIRVELO-EN N 01 01/2017