PULL BOXES WITH MANHOLE. -x = co

Size: px

Start display at page:

Download "PULL BOXES WITH MANHOLE. -x = co"

Patrick Turner
5 years ago
Views:

1 PULL BOXES WTH MANHOLE PULL BOX: A - 5'x1'x7'H B - 6'x12'x7'H C - 1'6"x16'x8'H D - 1'1"x17'x8'H & FNAL GRADE f3& ~ co 16 :a: Cl ~ H-2 TRAFFC LOADNG A BOX - 1'-" MN. B BOX - 12'-" MN. C & D BOX - 16'-" MN. -' co r-,. z -x :a: = co A BOX 5'-" MN. B BOX 6'-" MN. C BOX 1'-6" MN. D BOX 7'-" MN. 9u CX) ' <( & SECTON A-A 1. SEE SERVCE PROVDER CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 2. SERVCE PROVDER RESERVES THE RGHT TO REQUEST SPECAL ENDBELL PLACEMENT BY THE MEANS OF CORE DRLLNG EXSTNG OR NEW PULL BOXES. 3. AN ACCESS APPONTMENT MAY BE REQURED, SEE THE CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 4. APPROVED SUPPLERS ARE RESPONSBLE FOR MEETNG SERVCE PROVDER PULL BOX SPECFCATONS. MANHOLE RNG & COVER (SEE PAGE 2 FOR DETALS) (FURNSHED BY CUSTOMER) NOTE: ALL GRADE RNGS TO BE 36 NCH MNMUM DAMETER, WTH LADDER 24" ~-,:=--GRADE RNGS RUNG N EACH..., " MN ALL GRADE RNGS TO HAVE RUNG NSERTS CAST N PLACE ON TWO SDES, TO BE FURNSHED BY THE CUSTOMER. MANHOLE DETALS NFRA-RSER RUBBER COMPOSTE ADJUSTMENT RNGS ARE APPROVED FOR THE USE ON EXSTNG NSTALLATONS. THESE RNGS COME N SZES 1/2, 1, 2 & 3 NCH HEGHTS FOR THE THREE SZES OF COVERS LSTED N EM-L59 PAGE 2 OF 2. SUPPLERS: BORDER STATES (LEAD TME S 2-6 WEEKS) ~ (N STOCK) A NO. 16 UniSouroeEnergy..._N_T_Ar_E_D_sY_--+-_sc----1_REVSON SERVl:ES SANTACRUZCOUm ESR COMM ESR COMM. EFFECTVE DATE 9-17 SR-225& Pg. 1 of 9

2 PULL BOXES WTH MANHOLE MANHOLE AND LADDER DETALS MANHOLE COVER: 2'-7 1/2" FURNSHED BY THE CUSTOMER AND NSTALLED N THE UNLOCKED POSTON FBER RENFORCED POLYMER (6 LBS.) WTH CAST STANLESS STEEL HARDWARE MANUFACTURER: McGARD FS H-2 TRAFFC RATED DENTFED WTH "ELECTRC".5'' OR 1.125" MANHOLE RNG: FURNSHED BY THE CUSTOMER. CAST RON; H-2 TRAFFC LOADNG. RNG TO CONTAN LFTNG EYES. RNG SEAT MUST MEASURE ETHER.5'' OR 1.125" N HEGHT. 2'-6" GRADE.. ] RNG SEAT MUST MEASURE.5'' OR 1.125" N HEGHT RUNG OF GRADE RNG 1'-6" 1. CUSTOMER TO FURNSH LADDERS N PULL BOXES; A PULL BOX-(1) LADDER B, C & D PULL BOX-(2) LADDERS & 2. LADDERS CONSTRUCTED AND NSTALLED PER ANS A14.3 LATEST EDTON, FOR FXED LADDER SAFETY REQUREMENTS. 24 NCH MNMUM CLEAR ACCESS WTH LADDER N PLACE MUST BE MANTANED. 1'-" 3/4" ROD u & ;..., 3. FOR PULL BOX B, C & D LADDER(S) SHALL BE HUNG FROM THE FRST GRADE RNG ABOVE THE PULL BOX FACNG THE PORTS OF THE NTEROR WALLS, THEN SECURELY FASTENED TO CONCRETE NSERTS CAST NTO THE FLOOR. FOR PULL BOX A LADDER(S) SHALL BE HUNG FROM THE FRST GRADE RNG ABOVE THE PULL BOX FACNG TRAFFC WHEN ENTERNG/EXTNG, THEN SECURELY FASTENED TO CONCRETE NSERTS CAST NTO THE (2) 2"x3/8" BAR w u ~ (J') (J') 3/4" ROD M.S.xl'-6 1/2" TYP. (.!) z => :: (J'\ ~ /16" HOLE 1/2" :f - L S"x3"x3/8" 2" +--+l-=-- 4. FNSH: GALVANZED NTATED BY SC REVSON NO. 15 UniS roeenergy a SfflVl:ES i--es_r_c_o_m_m_. _+-_9_-1_7---i SMTACRUZCOUNTY RUNG OF GRADE RNG ESR COMM EFFECTVE DATE 9-17

3 PULL BOX WTH MANHOLE EXPANDED VEW PULL BOXA (5' X 1' X 7') NO LONGER APPROVED FOR ONLY 36" MNMUM MANHOLE OPENNG 18" 18" 18" 18" PULL BOX JONT z P-32 SERES UNSTRUT PULL RONS N WALL BEAM - TYPCAL BOTH WALLS (6 N EACH WALL AS SHOWN) 6"-4/ CU. PGTAL BONDED TO REBAR CAGE (4 CORNERS) 4"x12" DA. S HOLE WTH REMOVABLE GRATE 1. SEE ADDTONAL REQUREMENTS ON PAGE SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 3. APPROVED SUPPLERS: UTLTY VAULT CO. HAYDEN CONCRETE PRECAST MFG _ NTATED BY SC REVSON NO. 9 UniSouroeEnergy a , SERVES i--es_r_c_o_m_m_ _7----i SMTACRUZCDUNn ESR COMM EFFECTVE DATE 9-17 SR-225 Pg. 3 of 9

4 PULL BOX WTH (2) MANHOLES EXPANDED VEW PULL BOX B (6' X 12' X 7') 36" MNMUM MANHOLE OPENNG PULL BOX JONT FOR THE SNGLE BOTOM DESGNED BOX (OPTONAL) P-32 SERES UNSTRUT PULL BOX JONT ~+ ~ = N,..., ~ N,...,..,..1. i m 8" ct 9" 18" PULL RONS N WALL BEAM - TYPCAL BOTH WALLS (6 N EACH WALL AS SHOWN) 6"-4/ CU. PGTAL BONDED TO REBAR CAGE (4 CORNERS) 4"x12" DA. SUMP HOLE WTH REMOVABLE GRATE 18" 18" 18" 18" 1. SEE ADDTONAL REQUREMENTS ON PAGE SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 3. APPROVED SUPPLERS : OLDCASTLE PRECAST PRECAST VAULT CO. HAYDEN CONCRETE UniSouroeEnergy _ REVSON NO. 15 _N_T_AT_E_D _Bv_--+-_oc SERVl:ES ESR COMM SMTACRUZCOUNTY ESR COMM EFFECTVE DATE 9-17

5 PULL BOX WTH (2) MANHOLES EXPANDED VEW PULL BOX C (1'-6" X 16' X 8') (2) 36" MNMUM MANHOLE OPENNGS PULL BOX JONT FOR THE SNGLE BOTOM DESGNED BOX (OPTONAL) -$-l (2) P32 UNSTRUT (12'-") (3) EACH SDE 6"-4/ CU. PGTAL BONDED TO REBAR CAGE (4 CORNERS) PULL RONS N WALL BEAM - TYPCAL BOTH WALLS (4 N EACH WALL AS SHOWN) 4"x12" DA. SUMP HOLE WTH REMOVABLE GRATE 1. SEE ADDTONAL REQUREMENTS ON PAGE SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 3. APPROVED SUPPLERS: OLDCASTLE PRECAST UniS roeenergy..., _ REVSON NO. 15 r_nr_n_at_e_d _Bv_--+-_sc----1 SERn:ES ESR COMM SMTACRUZCOUNTY ESR COMM EFFECTVE DATE

6 DUCT AND TRENCHNG NOTES PULL BOX 1. Duct size to be 4" or 6" as specified. See SR-215 for trenching and duct installation. 2. Duct shall be of a type specified by the TEP Standard SR Bedding and backfill shall comply with the TEP Standard SR-27. CUSTOMER REQUREMENTS FOR PULL BOX NSTALLATON 1. Excavation for the pull box shall be such that the top of the manhole will be at final grade± 1/4". 2. Pull box shall be located so that the duct will enter the pull box without any deflections. 3. Duct endbells are to be cast in place, flush with interior wall of pull box. All endbells are to be a standard 6" size and are to be placed as depicted for pull box A, B, C and D. See Construction Drawing for duct size and duct placement. Where duct size is other than 6", endbell adapters will be provided by the pull box manufacturer to accommodate the duct size being installed. 4. Prior to setting, the customer shall provide a minimum of 3 inches of bedding material as specified in SR-27 as a base for the pull box. This bedding material should be compacted and graded level at the proper elevation. All backfill shall be placed progressively in 6 inch lifts and compacted to a minimum of 95 percent of Standard Proctor Density (ASTM D698). 5. All reinforcement steel shall be deformed billet steel conforming to ASTM A615, Grade Manhole lid and ring to be furnished and installed by the customer. 7. Manhole is to be concreted to neck of pull box. 8. Manhole lid standard marking to be "Electric". 9. Precast manhole grade rings require a sealer to be placed at each interface. 1. Ladder to be provided by the pull box manufacturer and installed by the contractor. 11. The pull box manufacturer's name is to be embossed onto the inside top of the pull box. 12. Duct identification letters to be embossed in concrete above each endbell on inside and outside walls of pull box A, B, C and D boxes (see expanded views). 13. Outside duct plugs to be provided in each endbell entrance into pull box. 14. Ground wire to be attached to rebar cage by thermal weld or by a bronze bolted parallel connector designed for bonding use. Example: Burndy Connector Cat. No. KVSU28. A 15. Service Provider reserves the right to require density (compaction) testing to verify conformance to the standard referenced in item 4 above. f required, density (compaction) testing shall consist of one test at every two feet of vertical height of pull box backfill, alternating sides with successive two foot increments. 16. Manhole cover is to be installed in the unlocked position. The TEP inspector will lock the cover after all inspections are complete. UniS roeenergy _ REVSON NO. 14 _N_n_AT_E_D _sv_--+-_sc SERn:ES ESR COMM SMTACRUZCOUNTY ESR COMM EFFECTVE DATE 9-17 SR-225 Pg. 6 of 9

7 USE: PULL BOX DETAL TYPE B &C PULL BOXES WTH 2 MANHOLES PVC/SMOOTH-COR EXAMPLE (OPTONAL) ELECTRCAL SCHEDULE 4 PVC MAY BE NSTALLED FROM THE PULL BOX (STRAGHT), UP TO 1' AWAY FROM THE END OF THE PULL BOX. THE CONDUT S TO BE ENCASED N CONCRETE FOR THE DSTANCE OF 1' AWAY FROM THE END OF THE PULL BOX. FNAL GRADE 1 FT. CONCRETE ENCASEMENT ! ~ PROFLE VEW SMOOTH-COR EXAMPLE (PREFERRED) SMOOTH-COR HDPE NSTALLATON REQURES 2 FT. MNMUM OF ELECTRCAL SCHEDULE 4 PVC AT THE CONNECTON TO A PULL BOX. THE CONDUT S TO BE NSTALLED STRAGHT AND ENCASED N CONCRETE FOR THE DSTANCE OF 1 FT. AWAY FROM THE END OF THE PULL BOX. THE CONDUT SYSTEM DEPTH S TO GRADUALLY TRANSTON TO THE TRENCH DEPTH SPECFED N SR-215 OR SR-212. NOTE: SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. TEP RESERVES THE RGHT TO REQUEST SPECAL ENDBELL PLACEMENT BY THE MEANS OF CORE DRLLNG EXSTNG OR NEW PULL BOXES. AN ACCESS APPONTMENT MAY BE REQURED, SEE THE CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. _, NTATED BY GC REVSON NO. 2 UniS roeenergy -ES_R_C_O_MM_. - _ : smv1:es a _-_11 SUTCRUZCOUNTY ESR COMM. 5-7 EFFECTVE DATE 9-17

8 PULL BOX WTH (2) MANHOLES EXPANDED VEW PULL BOX D (1'-1" X 16' X 7') (2) 36" MNMUM MANHOLE OPENNGS PULL BOX JONT FOR THE SNGLE BOTO DESGNED BOX (OPTONAL) -$-1- (2) P32 UNSTRUT (12'-") (3) EACH SDE WALL BEAM 6"-4/ CU. PGTAL BONDED TO REBAR CAGE (4 CORNERS) 4'-" 14" 14" PULL RONS N WALL BEAM - TYPCAL BOTH WALLS (4 N EACH WALL AS SHOWN) 4"x12" DA. SUMP HOLE WTH REMOVABLE GRATE 1. SEE ADDTONAL REQUREMENTS ON PAGE SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 3. APPROVED SUPPLERS: OLDCASTLE PRECAST _ _ NTATED BY DM REVSON NO. UniSouroeEnergy _J--...;;...;;_...; ,.. SR-225 SERVES ESR COMM. SJACRUZCDUffl ESR COMM EFFECTVE DATE 9-17 Pg. 8 of 9

9 4"x12" DA. SUMP HOLE WTH REMOVABLE GRATE 4'-5" PULL BOX WTH (2) MANHOLES PLAN, SDE & END VEW PULL BOX D ( 1'-1" X 16' X 7') 17'-" 8'-2" 4'-5" 6"-4/ CU. PGTAL BONDED TO REBAR CAGE (4 CORNERS) ~ ~ L J 8'-" 8'-" (2) P32 UNSTRUT (12'-") (3) EACH SDE 16'-" PLAN VEW PULL RONS N WALL BEAM - TYPCAL N BOTH SDE WALLS (4 N EACH WALL) 8'-" (2) 36" DA. 7'-" MANHOLE OPENNG 7" en N = d= = = = - ======.be= _H_ c :::r _L ""=L.L._ me me E9 ~ J 3'-3" 4'-9" 4'-9" 3'-3" 16'-" 6" ENDBELLS 34" 16" 34" 12" SDE VEW END VEW TiP _ UniS roeenergy 1. SEE ADDTONAL REQUREMENTS ON PAGE SEE TEP CONSTRUCTON DRAWNGS FOR DUCT ENTRANCE LOCATONS. 3. APPROVED SUPPLERS: OLDCASTLE PRECAST NTATED BY DM REVSON NO. ESR COMM. SERn:ES SANTA CRUZ COUNTY ESR COMM EFFECTVE DATE SR Pg. 9 of 9

BUILT-IN MICROWAVE OVEN INSTALLATION INSTRUCTIONS

BUILT-IN MICROWAVE OVEN INSTALLATION INSTRUCTIONS 24" (61.0 cm), 27" (68.6 cm), 30" (76.2 cm) Ths product s sutable for use above electrc or gas bult-n ovens, and below non-vented electrc or gas cooktops.