I 1.4 SUBMITTALS. RENOVATIONS HOPEWELL TOWNSHIP MUNICIPAL BUILDING TOWNSHIP OF HOPEWELL COMMISSION NO. 10M013 BID # Bi1-15

Size: px

Start display at page:

Download "I 1.4 SUBMITTALS. RENOVATIONS HOPEWELL TOWNSHIP MUNICIPAL BUILDING TOWNSHIP OF HOPEWELL COMMISSION NO. 10M013 BID # Bi1-15"

Agnes Briggs
5 years ago
Views:

1 COMMSSON NO. 10M013 BD # B1-15 SECTON CONTROL-VOLTAGE ELECTRCAL POWER CABLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawngs and general provsons of the Contract, ncludng General and Supplementary Condtons and Dvson 01 Specfcaton Sectons, apply to ths Secton. * 1.2 SUMMARY A. Secton ncludes: 1. UTP cablng. 2. RS-232 cablng. 3. RS-485 cablng. * 4. Low-voltage control cablng. 5. Control-crcut conductors. * B. Related Sectons nclude the followng: 1. Dvson 26 Secton "Common Work Results for Electrcal" for common electrcal 2. nstallaton requrements and products. Dvson 26 Secton "dentfcaton for Electrcal Systems" for conductor and cable dentfcaton requrements and products. 1.3 DEFNTONS A. EM: Electromagnetc nterference. B. DC: nsulaton dsplacement connector. c. Low Voltage: As defned n NFPA 70 for crcuts and equpment operatng at less than 50 V or for remote-control and sgnalng power-lmted crcuts. D. Open Cablng: Passng cablng through open space (e.g., between the studs of a wall cavty). E. RCDD: Regstered Communcatons Dstrbuton Desgner. F. UTP: Unshelded twsted par. 1.4 SUBMTTALS * A. Product Data: For each type of product ndcated. CONTROL-VOLTAGE ELECTRCAL POWER CABLES

2 COMMSSON NO. 10M013 BD#B11-15 B. Qualfcaton Data: For qualfed layout techncan, nstallaton supervsor, and feld nspector. C. Source qualty-control reports. D. Feld qualty-control reports. E. Mantenance Data: For wre and cable to nclude n mantenance manuals. 1.5 QUALTY ASSURANCE A. Surface-Burnng Characterstcs: As determned by testng dentcal products accordng to ASTM E 84 by a qualfed testng agency. dentfy products wth approprate markngs of applcable testng agency. 1. Smoke-Developed ndex: 50 or less. B. Electrcal Components, Devces, and Accessores: Lsted and labeled as defned n NFPA 70, by a qualfed testng agency, and marked for ntended locaton and applcaton. C. Comply wth NFPA 70. PART 2 - PRODUCTS 2.1 UTP CABLE A. Manufacturers: Subject to complance wth requrements, avalable manufacturers offerng products that may be ncorporated nto the Work nclude, but are not lmted to, the followng: 1. Belden CDT nc.; Electroncs Dvson. 2. Berk-Tek; a Nexans company. 3. CommScope, nc. 4. Draka USA. 5. Geness Cable Products; Honeywell nternatonal, nc. 6. KRONE ncorporated. 7. Mohawk; a dvson of Belden CDT. 8. Nordex/CDT; a subsdary of Cable Desgn Technologes. 9. Superor Essex nc. 10. SYSTMAX Solutons; a CommScope, nc. brand M. 12. Tyco Electroncs/AMP Netconnect; Tyco nternatonal Ltd. 13. Or approved equal. B. Descrpton: 100-ohm, four-par UTP. 1. Comply wth CEA S for mechancal propertes Comply wth TA/EA-568-B. for performance specfcatons. CONTROL-VOLTAGE ELECTRCAL POWER CABLES n

3 COMMSSON NO. 10M013 BD #B Comply wth TA/EA-568-B.2, Category 5e. 4. Lsted and labeled by an NRTL acceptable to authortes havng jursdcton as complyng wth UL 444 and NFPA UTP CABLE HARDWARE 3 A. Manufacturers: Subject to complance wth requrements, avalable manufacturers offerng products that may be ncorporated nto the Work nclude, but are not lmted to, the followng: 1. Amercan Technology Systems ndustres, nc. 2. Dynacom Corporaton. 3. Hubbell Premse Wrng. 4. KRONE ncorporated. 5. Levton Voce & Data Dvson. 6. Molex Premse Networks; a dvson of Molex, nc. 7. Nordex/CDT; a subsdary of Cable Desgn Technologes. 8. Pandut Corp. 9. Semon Co. (The). 10. Tyco Electroncs/AMP Netconnect; Tyco nternatonal Ltd. 11. Or approved equal. B. UTP Cable Connectng Hardware: DC type, usng modules desgned for punch-down caps or tools. Cables shall be termnated wth connectng hardware of the same category or hgher. C. Connectng Blocks: 110 style for Category 5e. Provde blocks for the number of cables termnated on the block, plus 25 percent spare; ntegral wth connector bodes, ncludng plugs and jacks where ndcated. 2.3 RS-232 CABLE 3 A. Standard Cable: NFPA 70, Type CM. 1. Pared, two pars, No. 22 AWG, stranded tnned-copper conductors. 2. Polypropylene nsulaton. 3. ndvdual alumnum fol-polyester tape shelded pars wth 100 percent sheld coverage. 5. Pars are cabled on common axs wth No. 24 AWG, stranded tnned-copper dran wre Flame Resstance: Comply wth UL B. Plenum-Rated Cable: NFPA 70, Type CMP. 1. Pared, two pars, No. 22 AWG, stranded tnned-copper conductors. 2. Plastc nsulaton. 3. ndvdual alumnum fol-polyester tape shelded pars wth 100 percent sheld coverage. 4. Plastc jacket. 5. Pars are cabled on common axs wth No. 24 AWG, stranded tnned-copper dran wre. 6. Flame Resstance: Comply wth NFPA CONTROL-VOLTAGE ELECTRCAL POWER CABLES

4 U 2.4 RS-485 CABLE COMMSSON NO. 10M013 BD#B1-15 A. Standard Cable: NFPA 70, Type CM. 1. Pared, two pars, twsted, No. 22 AWG, stranded tnned-copper conductors. 2. PVC nsulaton. 5. Flame Resstance: Comply wth UL B. Plenum-Rated Cable: NFPA 70, Type CMP. 1. Pared, two pars, No. 22 AWG, stranded tnned-copper conductors. 2. Fluornated ethylene propylene nsulaton. 4. Fluornated 5. Flame ethylene Resstance: propylene jacket. NFPA 262, Flame Test. 2.5 LOW-VOLTAGE CONTROL CABLE A. Pared Cable: NFPA 70, Type CMG. K 1. One par, twsted, No. 16 AWG, stranded tnned-copper conductors. 2. PVC nsulaton. 5. Flame Resstance: Comply wth UL B. Plenum-Rated, Pared Cable: NFPA 70, Type CMP. 1. One par, twsted, No. 16 AWG, stranded tnned-copper conductors. 2. PVC nsulaton. 5. Flame Resstance: Comply wth NFPA CONTROL-CRCUT CONDUCTORS A. Class 1 Control Crcuts: Stranded copper, Type THHN-THWN, n raceway. B. Class 2 Control Crcuts: Stranded copper, Type THHN-THWN, n raceway. C. Class 3 Remote-Control and Sgnal Crcuts: Stranded copper, Type TW or Type TF, complyng wth UL 83. CONTROL-VOLTAGE ELECTRCAL POWER CABLES

5 COMMSSON NO. 10M013 BD#Bl SOURCE QUALTY CONTROL A. Factory test UTP and optcal fber cables on reels accordng to TA/EA-568-B. 1. B. Factory test UTP cables accordng to TA/EA-568-B.2. C. Cable wll be consdered defectve f t does not pass tests and nspectons. D. Prepare test and nspecton reports. PART 3 - EXECUTON 3.1 NSTALLATON OF CONDUCTORS AND CABLES A. Comply wth NECA 1. B. General Requrements for Cablng: 1. Comply wth TA/EA-568-B Comply wth BCS TSM, Ch. 6, "Cable Termnaton Practces." 3. Termnate all conductors; no cable shall contan untermnated elements. Make termnatons only at ndcated outlets, termnals, and cross-connect and patch panels. 4. Cables may not be splced. Secure and support cables at ntervals not exceedng 30 nches and not more than 6 nches from cabnets, boxes, fttngs, outlets, racks, frames, and termnals. 5. Bundle, lace, and tran conductors to termnal ponts wthout exceedng manufacturer's lmtatons on bendng rad, but not less than rad specfed n BCS TSM, "Cablng Termnaton Practces" Chapter. nstall lacng bars and dstrbuton spools. 6. Do not nstall brused, knked, scored, deformed, or abraded cable. Do not splce cable between termnaton, tap, or juncton ponts. Remove and dscard cable f damaged durng nstallaton and replace t wth new cable. 7. Cold-Weather nstallaton: Brng cable to room temperature before dereelng. Heat lamps shall not be used for heatng. 8. Pullng Cable: Comply wth BCS TSM, Ch. 4, "Pullng Cable." Montor cable pull * tensons. C. UTP Cable nstallaton: 1. Comply wth TA/EA-568-B nstall 110-style DC termnaton hardware unless otherwse ndcated. 3. Do not untwst UTP cables more than 1/2 nch from the pont of termnaton to mantan cable geometry. * D. nstallaton of Control-Crcut Conductors: 1. nstall wrng n raceways. Comply wth requrements specfed n Dvson 26 Secton "Raceway and Boxes for Electrcal Systems." CONTROL-VOLTAGE ELECTRCAL POWER CABLES

6 COMMSSON NO. 10M013 BD#B11-15 H E. Open-Cable nstallaton: 1. nstall cablng wth horzontal and vertcal cable gudes n telecommuncatons spaces wth termnatng hardware and nterconnecton equpment. 2. Suspend copper cable not n a wreway or pathway a mnmum of 8 nches above celngs by cable supports not more than 60 nches apart. 3. Cable shall not be run through structural members or n contact wth ppes, ducts, or other potentally damagng tems. F. Separaton from EM Sources: 1. Comply wth BCS TDMM and TA/EA-569-A recommendatons for separatng unshelded copper voce and data communcaton cable from potental EM sources, ncludng electrcal power lnes and equpment. 3.2 CONTROL-CRCUT CONDUCTORS A. Mnmum Conductor Szes: 1. Class 1 remote-control and sgnal crcuts, 14 AWG. 2. Class 2 low-energy, remote-control, and sgnal crcuts, 16 AWG. 3. Class 3 low-energy, remote-control, alarm, and sgnal crcuts, 14 AWG. 3.3 GROUNDNG A. For data communcaton wrng, comply wth ANS-J-STD-607-A and wth BCS TDMM, "Groundng, Bondng, and Electrcal Protecton" Chapter. B. For low-voltage wrng and cablng, comply wth requrements n Dvson 26 Secton "Groundng and Bondng for Electrcal Systems." 3.4 DENTFCATON m A. dentfy system components, wrng, and cablng accordng to TA/EA-606-A. Comply wth requrements for dentfcaton specfed n Dvson 26 Secton "dentfcaton for Electrcal Systems." 3.5 FELD QUALTY CONTROL A. Perform tests and nspectons. B. Tests and nspectons: 1. Vsually nspect UTP and optcal fber cable jacket materals for UL or thrd-party certfcaton markngs. nspect cablng termnatons to confrm color-codng for pn CONTROL-VOLTAGE ELECTRCAL POWER CABLES

7 COMMSSON NO. 10M013 BD#Bll-15 assgnments, and nspect cablng connectons to confrm complance wth TA/EA-568- B Vsually nspect cable placement, cable termnaton, groundng and bondng, equpment and patch cords, and labelng of all components. 3. Test UTP cablng for DC loop resstance, shorts, opens, ntermttent faults, and polarty between conductors. Test operaton of shortng bars n connecton blocks. Test cables after termnaton but not after cross connecton. C. Document data for each measurement. Prnt data for submttals n a summary report that s formatted usng Table 10.1 n BCS TDMM as a gude, or transfer the data from the nstrument to the computer, save as text fles, prnt, and submt. D. End-to-end cablng wll be consdered defectve f t does not pass tests and nspectons. E. Prepare test and nspecton reports. END OF SECTON CONTROL-VOLTAGE ELECTRCAL POWER CABLES

5. Identification products.

5. Identification products. Essex County College - West Essex Campus Addition And Renovations dib # 54292 / 11-14 [SECTION 260523- CONTROL-VOLTAGE ELECTRICAL POWER CABLES PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general