BS :- Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending beam rheometer (BBR) See BS EN

Transcription

1 BRITISH STANDARDS BS 71:- Safety of toys BS 71-10:2005 Organic chemical compounds. Sample preparation and extraction ISBN BS 598:- Sampling and examination of bituminous mixtures for roads and other paved areas BS :2005 Methods for determination of the condition of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings supersedes BS :1990 ISBN BS 1139:- Metal scaffolding BS :2005 Specification for prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems ISBN BS 2000:- Methods of test for petroleum and its products BS :2006 Determination of inorganic acidity of petroleum products. Colour indicator titration method supersedes BS :2005 ISBN members, BS EN PUBLICATIONS CW/15 B/510/1 B/514/24 PTI/13 BS :- Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending beam rheometer (BBR) See BS EN BS 5502:- Buildings and structures for agriculture BS :2005 Guide to regulations and sources of information supersedes BS :1996 ISBN BS 5906:2005 Waste management in buildings. Code of practice supersedes BS 5906:1980 ISBN BS 6068:- Water quality BS :- Biological methods. Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor). Duckweed growth inhibition test See BS ISO BS 6262:- Glazing for buildings BS :2005 Code of practice for the provision of information partially supersedes BS 6262:1982 ISBN BS 7970:2005 Electric cables. Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (U$dm = 72.5 kv) to 132kV (U$dm = 145 kv) ISBN B/549 B/508/1 B/520/4 GEL/20/16 BS 8443:2005 Specification for establishing the suitability of special purpose concrete admixtures ISBN X BS 8460:2005 Code of practice ISBN members, BS EN PUBLICATIONS BS EN 40:- Lighting columns BS EN 40-4:2005 Requirements for reinforced and prestressed concrete lighting columns supersedes BS :1982 ISBN BS EN 54:- Fire detection and fire alarm systems BS EN 54-17:2005 Short-circuit isolators ISBN BS EN 54-18:2005 Input/output devices ISBN BS EN 165:2005 Personal eye-protection. Vocabulary supersedes BS EN 165:1996 ISBN members, B/517/3 MHE/12 B/509/50 FSH/12 FSH/12 PH/2 Page 1 of 95

2 BS EN ISO 291:2005 Plastics. Standard atmospheres for conditioning and testing supersedes BS EN ISO 291:1997 ISBN BS EN 314:- Plywood. Bonding quality BS EN 314-1:2004 Test methods supersedes BS EN 314-1:1993 ISBN BS EN ISO 389:- Acoustics. Reference zero for the calibration of audiometric equipment BS EN ISO 389-7:2005 Reference threshold of hearing under free-field and diffuse-field listening conditions supersedes BS EN ISO 389-7:1998 ISBN BS EN 413:- Masonry cement BS EN 413-2:2005 Test methods supersedes BS EN 413-2:1995 ISBN BS EN ISO 483:2005 Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value supersedes BS EN ISO 483:1999 ISBN PRI/21 B/541 EH/1/1 B/516/10 PRI/21 BS EN 544:2005 Bitumen singles with mineral and/or synthetic reinforcements. Product specification and test methods supersedes BS EN 544:1998 ISBN BS EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete supersedes BS EN 680:1994 ISBN BS EN 692:2005 Machine tools. Mechanical presses. Safety supersedes BS EN 692:1997 ISBN members, BS EN 771:- Specification for masonry units BS EN 771-6:2005 Natural stone masonry units supersedes BS EN 771-6:2001 ISBN BS EN 827:2005 Adhesives. Determination of conventional solids content and constant mass solids content supersedes BS EN 827:1995 ISBN BS EN 957:- Stationary training equipment BS EN 957-1:2005 General safety requirements and test methods supersedes BS EN 957-1:1997 ISBN B/542/4 B/523 MTE/1 B/519/1 PRI/52 SW/136/4 BS EN 986:2005 Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane supersedes BS EN 986:1995 ISBN BS EN 1011:- Welding. Recommendations for welding of metallic materials BS EN :2005 Laser beam welding ISBN BS EN 1034:- Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines BS EN :2005 Barking drums ISBN BS EN :2005 Sheeters ISBN BS EN :2005 Woodgrinders ISBN PRI/3 WEE/-/1 MCE/3/9 MCE/3/9 MCE/3/9 BS EN PUBLICATIONS Page 2 of 95

3 BS EN 1040:2005 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1) supersedes BS EN 1040:1997 ISBN BS EN 1067:2005 Adhesives. Examination and preparation of samples for testing supersedes BS EN 1067:1998 ISBN BS EN 1275:2005 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1) supersedes BS EN 1275:1997 ISBN members, BS EN 1279:- Glass in building. Insulating glass units BS EN :2005 Evaluation of conformity ISBN BS EN 1504:- Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity BS EN :2005 Definitions supersedes BS EN :1998 ISBN BS EN PUBLICATIONS CH/216 PRI/52 CH/216 B/520/2 B/517/8 BS EN 1545:- Identification card systems. Surface transport applications BS EN :2005 Transport and travel payment related data elements and code lists supersedes DD ENV :1998 ISBN members, BS EN 1866:2005 Mobile fire extinguishers supersedes BS EN 1866:1999 ISBN BS EN 1873:2005 Prefabricated accessories for roofing. Individual roof lights of plastics. Product specification and test methods ISBN members, BS EN 1912:2004 Structural timber. Strength classes. Assignment of visual grades and species supersedes BS EN 1912:1998 ISBN BS EN 1991:- Eurocode 1. Actions on structures NA to BS EN :2002 General actions. Densities, self-weight, imposed loads for buildings (national annex) ISBN X members, BS EN 1998:- Eurocode 8. Design of structures for earthquake resistance IST/17 FSH/2 B/542/8 B/518 B/525/1 BS EN :2005 Assessment and retrofitting of buildings supersedes DD ENV :1996 ISBN members, BS EN :2005 Towers, masts and chimneys supersedes DD ENV :1997 ISBN members, BS EN 2072:2005 Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm <= a <= 6 mm supersedes BS EN 2072:1994 ISBN BS EN 2243:- Aerospace series. Non-metallic materials. Structural adhesives. Test method BS EN :2005 Single lap shear ISBN BS EN :2005 Peel metal-metal supersedes BS EN :1991 ISBN BS EN :2005 Ageing tests supersedes BS EN :1992 ISBN B/525/8 B/525/8 ACE/61/-/24 ACE/65/-/63 ACE/65/-/63 ACE/65/-/63 Page 3 of 95

4 BS EN 2336:2005 Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads supersedes BS EN 2336:1990 ISBN X BS EN 2607:2005 Aerospace series. O-rings for adaptors, threaded, with lockring. Survey ISBN BS EN ISO 3095:2005 Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles ISBN BS EN ISO 3381:2005 Railway applications. Acoustics. Measurement of noise inside railbound vehicles ISBN BS EN ISO 3758:2005 Textiles. Care labelling code using symbols supersedes BS EN 23758:1994 ISBN BS EN ISO 3834:- Quality requirements for fusion welding of metallic materials BS EN ISO :2005 Criteria for the selection of the appropriate level of quality requirements supersedes BS EN 729-1:1995 ISBN ACE/12 ACE/12 EH/1/2 EH/1/2 TCI/82 WEE/-/1 BS EN ISO :2005 Comprehensive quality requirements supersedes BS EN 729-2:1995 ISBN BS EN ISO :2005 Standard quality requirements supersedes BS EN 729-3:1995 ISBN BS EN ISO :2005 Elementary quality requirements supersedes BS EN 729-4:1995 ISBN BS EN ISO :2005 Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO , ISO or ISO ISBN BS EN ISO 4073:2005 Dental equipment. Items of dental equipment at the working place. Identification system ISBN BS EN 4175:2005 Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series ISBN WEE/-/1 WEE/-/1 WEE/-/1 WEE/-/1 CH/106/6 ACE/12 BS EN 4176:2005 Aerospace series. Lockbolts, 100$0D countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy Metric ISBN BS EN 4179:2005 Aerospace series. Qualification and approval of personnel for non-destructive testing supersedes BS EN 4179:2000 ISBN BS EN 4303:2005 Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated (0,25 mm wall thickness) ISBN BS EN 4307:2005 Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated (0,50 mm wall thickness) ISBN BS EN 4449:2005 Aluminium alloy AL-P7050. T76. Sheet. 0,8 mm $3L a $3L 6 mm ISBN ACE/12 ACE/61/-/5 ACE/12 ACE/12 ACE/61/-/24 BS EN PUBLICATIONS Page 4 of 95

5 BS EN 4458:2005 Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS$d2 coated, with serrated locking ring in corrosion resisting steel. Strength class: 1100 MPa (at ambient temperature). Technical specification ISBN BS EN 4496:2005 Aerospace series. Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: MPa (at ambient temperature) / 315 $0DC ISBN BS EN 4497:2005 Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: MPa (at ambient temperature) / 315 $0DC ISBN BS EN 4498:2005 Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: MPa (at ambient temperature) / 315 $0DC ISBN BS EN ISO 4545:- Metallic materials. Knoop hardness test ACE/12 ACE/12 ACE/12 ACE/12 BS EN ISO :2005 Test method ISBN BS EN ISO :2005 Verification and calibration of testing machines ISBN BS EN ISO :2005 Calibration of reference blocks ISBN BS EN ISO :2005 Tables of hardness values ISBN BS EN 4590:2005 ISE/NFE/4/5 ISE/NFE/4/5 ISE/NFE/4/5 ISE/NFE/4/5 Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated ISBN BS EN 4591:2005 Aerospace series. Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS$d2 lubricated. Classification: MPa (at ambient temperature) / 315$0DC ISBN ACE/12 ACE/12 BS EN ISO 4684:2005 Leather. Chemical tests. Determination of volatile matter ISBN BS EN ISO 6360:- Dentistry. Number coding system for rotary instruments BS EN ISO :2005 Specific characteristics of burs and cutters ISBN BS EN ISO 6506:- Metallic materials. Brinell hardness test BS EN ISO :2005 Test method supersedes BS EN ISO :1999 ISBN BS EN ISO :2005 TCI/69 CH/106/4 ISE/NFE/4/5 Verification and calibration of testing machines supersedes BS EN ISO :1999 ISBN BS EN ISO :2005 Calibration of reference blocks supersedes BS EN ISO :1999 ISBN X BS EN ISO :2005 Table of hardness values ISBN BS EN ISO 6507:- Metallic materials. Vickers hardness test ISE/NFE/4/5 ISE/NFE/4/5 ISE/NFE/4/5 BS EN PUBLICATIONS Page 5 of 95

6 BS EN ISO :2005 Test method supersedes BS EN ISO :1998 ISBN X BS EN ISO :2005 ISE/NFE/4/5 Verification and calibration of testing machines supersedes BS EN ISO :1998 ISBN BS EN ISO :2005 Calibration of reference blocks supersedes BS EN ISO :1998 ISBN BS EN ISO :2006 Tables of hardness values ISBN members, BS EN ISO 6508:- Metallic materials. Rockwell hardness test BS EN ISO :2005 ISE/NFE/4/5 ISE/NFE/4/5 ISE/NFE/4/5 Test method (scales A, B, C, D, E, F, G, H, K, N, T) supersedes BS EN ISO :1999 ISBN BS EN ISO :2005 ISE/NFE/4/5 Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) supersedes BS EN ISO :1999 ISBN ISE/NFE/4/5 BS EN ISO 6683:2005 Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests supersedes BS EN ISO 6683:2000 ISBN BS EN ISO 7494:- Dentistry. Dental units BS EN ISO :2005 General requirements and test methods supersedes BS EN ISO 7494:1998 ISBN BS EN ISO 7686:2005 Plastics pipes and fittings. Determination of opacity supersedes BS EN 578:1994 ISBN BS EN ISO 7886:- Sterile hypodermic syringes for single use BS EN ISO :2005 Auto-disable syringes for fixed dose immunization ISBN BS EN ISO 8092:- Road vehicles. Connections for on-board electrical wiring harnesses BS EN ISO :2005 Definitions, test methods and general performance requirements supersedes BS EN ISO :2002 ISBN B/513/1 CH/106/6 PRI/88/4 CH/84 AUE/16 BS EN ISO :2005 Non-gravimetric methods for the assessment of equipment performance ISBN BS EN ISO 8980:- Ophthalmic optics. Uncut finished spectacle lenses BS EN ISO :2005 Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant ISBN BS EN ISO 8987:2005 Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate supersedes BS EN ISO 8987:1998 ISBN BS EN 9103:2005 Aerospace series. Quality management systems. Variation management of key characteristics ISBN BS EN 9110:2005 Aerospace series. Quality systems. Model for quality assurance applicable to maintenance organizations ISBN LBI/36/1 CH/172/3 PRI/21 ACE/1 ACE/1 BS EN ISO 8655:- Piston-operated volumetric apparatus BS EN PUBLICATIONS Page 6 of 95

7 BS EN 9111:2005 Aerospace series. Quality management systems. Assessment applicable to maintenance organizations ISBN members, BS EN 9120:2005 Aerospace series. Quality management systems. Requirements for stockist distributors ISBN BS EN 9121:2005 Aerospace series. Quality management systems. Assessment applicable to stockist distributors ISBN BS EN ISO 9342:- Optics and optical instruments. Test lenses for calibration of focimeters BS EN ISO :2005 Test lenses for focimeters used for measuring contact lenses ISBN BS EN ISO 10042:2005 Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections supersedes BS EN 30042:1994 ISBN ACE/1 ACE/1 ACE/1 CH/172 WEE/-/1 BS EN 10049:2005 Measurement of roughness average. Ra and peak count RPc on metallic flat products ISBN BS EN 10226:- Pipe threads where pressure tight joints are made on the threads BS EN :2005 Taper external threads and taper internal threads. Dimensions, tolerances and designation ISBN BS EN ISO 10308:2006 Metallic coatings. Review of porosity tests supersedes BS EN ISO 10308:1997 ISBN X BS EN ISO 10426:- Petroleum and natural gas industries. Cements and materials for well cementing BS EN ISO :2005 Determination of shrinkage and expansion of well cement formulations at atmospheric pressure ISBN BS EN ISO 11073:- Health informatics. Point-of-care medical device communications BS EN ISO :2005 Nomenclature ISBN members, ISE/10 ISE/19 STI/33 PSE/17 IST/35 BS EN ISO 11192:2005 Small craft. Graphical symbols ISBN BS EN ISO 11339:2005 Adhesives. T-peel test for flexible-to-flexible bonded assemblies supersedes BS EN 14173:2002 ISBN BS EN ISO 11343:2005 Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method supersedes BS EN 14493:2002 ISBN X BS EN ISO 11621:2005 Gas cylinders. Procedures for change of gas service supersedes BS EN 1795:1998 ISBN BS EN 12123:2005 Chemicals used for treatment of water intended for human consumption. Ammonium sulfate supersedes BS EN 12123:1999 ISBN BS EN 12173:2005 Products used for treatment of water intended for human consumption. Sodium fluoride supersedes BS EN 12173:1999 ISBN BS EN 12195:- Load restraint assemblies on road vehicles. Safety GME/33 PRI/52 PRI/52 PVE/3/7 CII/59 CII/59 BS EN PUBLICATIONS Page 7 of 95

8 BS EN :2003 Lashing steel wire ropes ISBN BS EN 12472:2005 Method for the simulation of wear and corrosion for the detection of nickel release from coated items supersedes BS EN 12472:1999 ISBN BS EN ISO 12567:- Thermal performance of windows and doors. Determination of thermal transmittance by hot box method BS EN ISO :2005 Roof windows and other projecting windows ISBN BS EN 12581:2005 Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements ISBN members, BS EN ISO 12625:- Tissue paper and tissue products BS EN ISO :2005 Determination of wet tensile strength supersedes BS EN :1999 ISBN BS EN 12666:- Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) MHE/16 STI/53 B/540 MCE/3/8 PAI/11 BS EN :2005 Specifications for pipes, fittings and the system ISBN BS EN 12697:- Bituminous mixtures. Test methods for hot mix asphalt BS EN :2005 In situ drainability ISBN BS EN ISO 12737:2005 Metallic materials. Determination of plane-strain fracture toughness supersedes BS EN ISO 12737:1999 ISBN BS EN 12851:2005 Food processing machinery. Catering attachments for machines having an auxiliary drive hub. Safety and hygiene requirements ISBN BS EN 12912:2005 Products used for treatment of water intended for human consumption. Barite supersedes BS EN 12912:1999 ISBN BS EN 12913:2005 Products used for treatment of water intended for human consumption. Powdered diatomaceous earth supersedes BS EN 12913:1999 ISBN PRI/88/1 B/510/1 ISE/NFE/4/4 MCE/3/5 CII/59 CII/59 BS EN 12914:2005 Products used for treatment of water intended for human consumption. Powdered perlite supersedes BS EN 12914:1999 ISBN BS EN ISO 13000:- Plastics. Polytetrafluoroethylene (PTFE) semi-finished products BS EN ISO :2005 Requirements and designation supersedes BS EN ISO :1998 ISBN BS EN ISO :2005 Preparation of test specimens and determination of properties supersedes BS EN ISO :1998 ISBN BS EN 13069:2005 Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods ISBN BS EN 13102:2005 Ceramic machines. Safety. Loading and unloading of fine clay tiles ISBN BS EN 13200:- Spectator facilities BS EN :2005 Separating elements. Requirements ISBN CII/59 PRI/82 PRI/82 B/506 MCE/3/14 B/552 BS EN PUBLICATIONS Page 8 of 95

9 BS EN ISO 13397:- Dentistry. Periodontal curettes, dental scalers and excavators BS EN ISO :2006 Periodontal curettes of Gr-type supersedes BS EN ISO :1997 ISBN BS EN 13501:- Fire classification of construction products and building elements BS EN :2005 Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers ISBN BS EN ISO 13503:- Petroleum and natural gas industries. Completion fluids and materials BS EN ISO :2005 Testing of heavy brines ISBN members, BS EN ISO 13706:2005 Petroleum, petrochemical and natural gas industries. Air-cooled heat exchangers supersedes BS EN ISO 13706:2000 ISBN X members, BS EN ISO 13732:- Ergonomic of the thermal environment. Methods for the assessment of human responses to contact with surfaces CH/106/4 FSH/22 PSE/17/-/3 PSE/17/-/6 BS EN ISO :2005 Cold surfaces ISBN BS EN 13747:2005 Precast concrete products. Floor plates for floor systems ISBN members, BS EN ISO 13791:2004 Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures ISBN members, BS EN 13954:2005 Food processing machinery. Bread slicers. Safety and hygiene requirements ISBN members, BS EN 14209:2005 Preformed plasterboard cornices. Definitions, requirements and test methods ISBN BS EN 14223:2005 Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption ISBN PH/9/1 B/524 B/540 MCE/3/5 B/544/5 B/546/9 BS EN 14255:- Measurement and assessment of personal exposures to incoherent optical radiation BS EN :2005 Visible and infrared radiation emitted by artificial sources in the workplace ISBN members, BS EN 14279:2004 Laminated veneer lumber (LVL). Definitions, classification and specifications ISBN X BS EN 14298:2004 Sawn timber. Assessment of drying quality ISBN BS EN 14337:2005 Heating systems in buildings. Design and installation of direct electrical room heating systems ISBN BS EN 14453:2005 Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C supersedes BS :1982 ISBN BS EN 14487:- Sprayed concrete CPL/34/10 B/541 B/543 RHE/24 B/504 BS EN PUBLICATIONS Page 9 of 95

10 BS EN :2005 Definitions, specifications and conformity ISBN BS EN 14488:- Testing sprayed concrete BS EN :2005 Sampling fresh and hardened concrete ISBN BS EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards. Definitions, requirements and test methods ISBN BS EN 14535:- Railway applications. Brake discs for railway rolling stock BS EN :2005 Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements ISBN BS EN 14543:2005 Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use ISBN BS EN PUBLICATIONS B/517/10 B/517/10 B/544/2 RAE/4 GSE/24 BS EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics. Requirements and classification ISBN BS EN 14621:2005 Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns ISBN BS EN 14622:2005 Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A, type F ISBN BS EN 14623:2005 Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G supersedes BS :1982 ISBN BS EN 14652:2005 Water conditioning equipment inside buildings. Membrane separation devices. Requirements for performance, safety and testing ISBN X members, BS EN 14663:2005 Foodstuffs. Determination of vitamin B6 (including its glycosylated forms) by HPLC ISBN B/538/1 TCI/24 B/504/4 B/504/4 B/504/13 AW/-/3 BS EN 14683:2005 Surgical masks. Requirements and test methods ISBN BS EN ISO 14688:- Geotechnical investigation and testing. Identification and classification of soil BS EN ISO :2004 Principles for a classification partially supersedes BS 5930:1999 ISBN BS EN 14706:2005 Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature ISBN BS EN 14726:2005 Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis ISBN BS EN 14727:2005 Laboratory furniture. Storage units for laboratories. Requirements and test methods ISBN BS EN 14752:2005 Railway applications. Body entrance systems ISBN members, CH/205/1 B/526/3 B/540 NFE/35 FW/0 RAE/1/-/10 Page 10 of 95

11 BS EN 14755:2005 Extruded particleboards. Specifications ISBN BS EN 14758:- Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) BS EN :2005 Specifications for pipes, fittings and the system ISBN BS EN 14764:2005 City and trekking bicycles. Safety requirements and test methods partially supersedes BS :1992 ISBN members, BS EN 14766:2005 Mountain-bicycles. Safety requirements and test methods partially supersedes BS :1992 ISBN members, BS EN 14769:2005 Methods of test for petroleum and its products. Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a pressure ageing vessel (PAV) ISBN members, B/541 PRI/88/1 GME/25 GME/25 PTI/13 BS EN 14770:2005 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic shear rheometer (DSR) ISBN members, BS EN 14771:2005 (BS :2005) Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending beam rheometer (BBR) ISBN members, BS EN 14781:2005 Racing bicycles. Safety requirements and test methods partially supersedes BS :1992 ISBN members, BS EN 14789:2005 Stationary source emissions. Determination of volume concentration of oxygen (O$d2). Reference method. Paramagnetism ISBN BS EN 14790:2005 Stationary source emissions. Determination of the water vapour in ducts ISBN members, PTI/13 PTI/13 GME/25 EH/2/1 EH/2/1 BS EN 14791:2005 Stationary source emissions. Determination of mass concentration of sulphur dioxide. Reference method ISBN members, BS EN 14795:2005 LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Periodic inspection ISBN BS EN 14802:2005 Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading ISBN BS EN 14841:2005 LPG equipment and accessories. Discharge procedures for LPG rail tankers ISBN BS EN 14866:2005 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications ISBN EH/2/1 PVE/19 PRI/88/1/P1 PVE/19 STI/36 BS EN PUBLICATIONS Page 11 of 95

12 BS EN 14874:2005 Inland navigation vessels. Studless anchor chain. Cable lifter ISBN BS EN 14884:2005 Air quality. Stationary source emissions. Determination of total mercury: automated measuring systems ISBN BS EN 14912:2005 LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders ISBN BS EN 14913:2005 LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Procedure for checking before, during and after filling ISBN BS EN 14914:2005 LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspection ISBN SME/32/7 EH/2/1 PVE/19 PVE/19 PVE/19 BS EN 14945:2005 Refractory products and materials. Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use supersedes BS :1998 ISBN BS EN 14976:2005 Textiles. Mattress tickings. Specification and test methods ISBN BS EN 15088:2005 Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery ISBN BS EN ISO 15236:- Steel cord conveyor belts BS EN ISO :2005 Design, dimensions and mechanical requirements for conveyor belts for general use ISBN BS EN ISO 15502:2005 Household refrigerating appliances. Characteristics and test methods supersedes BS EN 28187:1992, BS EN ISO 5155:1996, BS EN ISO 7371:1996 and BS EN ISO 8561:1996 ISBN members, BS EN ISO 15547:- Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers RPI/1 TCI/72 NFE/35 PRI/67 RHE/5 BS EN ISO : 2005 Plate-and-frame heat exchangers supersedes BS EN ISO 15547:2001 ISBN BS EN ISO 16484:- Building automation and control systems (BACS) BS EN ISO :2005 Data communication conformance testing ISBN members, BS EN ISO 17700:2005 Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing supersedes BS EN 13516:2002 ISBN BS EN ISO 19879:2005 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections ISBN BS EN ISO 19901:- Petroleum and natural gas industries. Specific requirements for offshore structures BS EN ISO :2005 Metocean design and operating considerations ISBN members, PSE/17/-/6 RHE/16 TCI/69 MCE/18/-/4 B/525/12 BS EN PUBLICATIONS Page 12 of 95

13 BS EN ISO :2005 Stationkeeping systems for floating offshore structures and mobile offshore units ISBN members, BS EN ISO 19980:2005 Ophthalmic instruments. Corneal topographers ISBN BS EN ISO 20126:2005 Dentistry. Manual toothbrushes. General requirements and test methods supersedes BS 5757:1989 which remains current ISBN BS EN ISO 20685: D scanning methodologies for internationally compatible anthropometric databases ISBN BS EN ISO 21007:- Gas cylinders. Identification and marking using radio frequency identification technology BS EN ISO :2005 Numbering schemes for radio frequency identification ISBN X members, B/525/12 CH/172/6 CH/106/7 PH/9/4 PVE/3/7 BS EN ISO 21570:2005 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods ISBN members, BS EN ISO 21871:2006 Microbiology of food and animal feeding stuffs. Horizontal method for the determination of low numbers of presumptive Bacillus cereus. Most probable number technique and detection method ISBN BS EN ISO 22374:2005 Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips ISBN BS EN ISO 22476:- Geotechnical investigation and testing. Field testing BS EN ISO :2005 Dynamic probing ISBN BS EN ISO :2005 Standard penetration test ISBN AW/-/3 AW/9 CH/106/4 B/526/3 B/526/3 BS EN ISO 22803:2005 Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file ISBN BS EN ISO 22827:- Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery BS EN ISO :2005 Moving mechanism ISBN BS EN ISO 24034:2005 Welding consumables. Solid wires and rods for fusion welding of titanium and titanium alloys. Classification ISBN X BS EN ISO 24450:2005 Laboratory glassware. Wide-necked boiling flasks ISBN BS EN 50363:- Insulating, sheathing and covering materials for low-voltage energy cables BS EN :2005 Halogen-free, cross-linked insulating compounds supersedes BS :1997 ISBN CH/106/8 WEE/-/1 WEE/39 LBI/36/1 GEL/20/17 BS EN PUBLICATIONS Page 13 of 95

14 BS EN :2005 Halogen-free, cross-linked sheathing compounds supersedes BS :2000 ISBN BS EN :2005 Halogen-free, thermoplastic insulating compounds ISBN BS EN :2005 Halogen-free, thermoplastic sheathing compounds ISBN BS EN :2005 Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC) supersedes BS :1997 ISBN BS EN :- Miscellaneous sheathing compounds BS EN :2005 Cross-linked polyvinyl chloride (XLPVC) supersedes BS :1997 ISBN BS EN :2005 Thermoplastic polyurethane supersedes BS :2000 ISBN BS EN 50423:- Overhead electrical lines exceeding A.C. 1 kv up to and including A.C. 45 Kv BS EN PUBLICATIONS GEL/20/17 GEL/20/17 GEL/20/17 GEL/20/17 GEL/20/17 GEL/20/17 BS EN :2005 General requirements. Common specifications ISBN X BS EN 50436:- Alcohol interlocks. Test methods and performance requirements BS EN :2005 Instruments for drink-driving-offender programs ISBN BS EN 60034:- Rotating electrical machines BS EN :2004 Rating and performance supersedes BS EN :1998 which remains current and partially supersedes BS :1987 ISBN members, BS EN 60519:- Safety in electroheat installations BS EN :2005 Particular requirements for high-frequency dielectric heating installations supersedes BS EN :1996 which remains current ISBN BS EN 60684:- Flexible insulating sleeving BS EN :2005 Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1. Thick and medium wall ISBN PEL/11 AUE/16 PEL/2 PEL/27 GEL/15/3/5 BS EN 60708:2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath ISBN BS EN 60728:- Cable networks for television signals, sound signals and interactive services BS EN :2005 Safety supersedes BS EN :1994 ISBN X members, BS EN 60749:- Semiconductor devices. Mechanical and climatic test methods BS EN :2005 Preconditioning of non-hermetic surface mount devices prior to reliability testing ISBN BS EN 60974:- Arc welding equipment BS EN :2005 Welding power sources supersedes BS EN :1998 ISBN members, BS EN 61083:- Digital recorders for measurements in high-voltage impulse tests BS EN :1997 Evaluation of software used for the determination of the parameters of impulse waveforms ISBN EPL/46 EPL/100 EPL/47 WEE/6 PEL/42 Page 14 of 95

15 BS EN 61249:- Materials for printed boards and other interconnecting structures BS EN :- Sectional specification set for prepreg materials, unclad BS EN :2005 Multifunctional epoxide woven E-glass prepreg of defined flammability ISBN BS EN :2005 Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability ISBN BS EN :2005 Non-halogenated epoxide, woven E-glass prepreg of defined flammability ISBN X BS EN :2005 Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability ISBN BS EN 61300:- Fibre optic interconnecting devices and passive components. Basic test and measurement procedures BS EN :- Tests EPL/501 EPL/501 EPL/501 EPL/501 BS EN :2005 Dry heat. High temperature endurance supersedes BS EN :1997 ISBN BS EN :2005 Static side load for connectors supersedes BS EN :1999 ISBN BS EN 61400:- Wind turbines BS EN :2005 Design requirements supersedes BS EN :2004 ISBN members, BS EN 61499:- Function blocks BS EN :2005 Architecture ISBN members, BS EN 61605:2005 Fixed inductors for use in electronic and telecommunication equipment. Marking codes supersedes BS EN 61605:1997 ISBN BS EN 61788:- Superconductivity BS EN :2005 Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors ISBN GEL/86/2 GEL/86/2 PEL/88 GEL/65 EPL/51 L/-/90 BS EN 61883:- Consumer audio/video equipment. Digital interface BS EN :2005 SD-DVCR data transmission supersedes BS EN :1998 which remains current ISBN BS EN :2005 HD-DVCR data transmission supersedes BS EN :1998 which remains current ISBN BS EN :2005 SDL-DVCR data transmission supersedes BS EN :1998 which remains current ISBN BS EN :2005 Audio and music data transmission supersedes BS EN :2002 which remains current ISBN members, BS EN 61937:- Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC BS EN :2005 Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats supersedes BS EN :2002 which remains current ISBN BS EN 61967:- Integrated circuits. Measurement of electromagnetic emissions, 150 khz to 1 GHz EPL/100 EPL/100 EPL/100 EPL/100 EPL/100 BS EN PUBLICATIONS Page 15 of 95

16 BS EN :2005 Measurement of radiated emissions. TEM cell and wideband TEM cell method ISBN BS EN 62008:2005 Performance characteristics and calibration for digital data acquisition systems and relevant software ISBN members, BS EN 62053:- Electricity metering equipment (AC). Particular requirements BS EN :2005 Symbols supersedes BS EN 60387:1993 ISBN BS EN 62055:- Electricity metering. Payments systems BS EN :2005 Particular requirements. Static payment meters for active energy (classes 1 and 2) ISBN members, BS EN 62301:2005 Household electrical appliances. Measurement of standby power ISBN BS EN 62317:- Ferrite cores. Dimensions EPL/47 PEL/85 PEL/13 PEL/13 CPL/59 BS EN :2005 EER-cores ISBN BS EN 62328:- Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers BS EN :2005 General description and architecture ISBN BS EN :2005 General recording structure ISBN members, BS EN 62359:2005 Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields ISBN members, BS EN 62365:2005 Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks ISBN BS ENs IMPLEMENTED BY AMENDMENT EPL/51 EPL/100 EPL/100 EPL/87 EPL/100 BS EN ISO 15914:2005 Animal feeding stuffs. Enzymatic determination of total starch content Implementation of European Standard EN ISO by amendment to BS ISO 15914:2004. BS IMPLEMENTATIONS BS ISO 132:2005 Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) supersedes BS ISO 132:1999 ISBN BS ISO 199:2005 Rolling bearings. Thrust bearings. Tolerances supersedes BS ISO 199:1997 ISBN BS ISO 289:- Rubber, unvulcanized. Determinations using a shearing-disc viscometer BS ISO 289-1:2005 Determination of Mooney viscosity supersedes BS 903-A58:1990 ISBN BS ISO 857:- Welding and allied processes. Vocabulary BS ISO 857-2:2005 Soldering and brazing processes and related terms ISBN BS ISO 1268:- Fibre-reinforced plastics. Methods of producing test plates AW/10 PRI/22 MCE/7 PRI/22 WEE/1 BS IMPLEMENTATIONS Page 16 of 95

17 BS ISO :2005 Moulding of prepregs ISBN BS ISO 1817:2005 Rubber, vulcanized. Determination of the effect of liquids supersedes BS ISO 1817:1999 ISBN BS ISO 2878:2005 Rubber. Antistatic and conductive products. Determination of electrical resistance partially supersedes BS 2050:1978 ISBN BS ISO 2921:2005 Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test) supersedes BS 903-A29:1997 ISBN BS ISO 3089:2005 Machine tools. Test conditions for self-centring, manually-operated chucks with one-piece jaws supersedes BS :1994 ISBN BS ISO 3140:2005 Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment ISBN PRI/42 PRI/22 PRI/22 PRI/22 MTE/1 4 BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures supersedes BS ISO 3384:1999 ISBN BS ISO 3442:- Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws BS ISO :2005 Manually operated chucks with tongue and groove type jaws supersedes BS :1994 ISBN X BS ISO :2005 Power-operated chucks with tongue and groove type jaws supersedes BS :1994 ISBN BS ISO 3509:2005 Coffee and coffee products. Vocabulary supersedes BS 5456:1989 ISBN BS ISO 3526:2005 Oil of sage, Spanish (Salvia lavandulifolia Vahl) ISBN BS ISO 4141:- Road vehicles. Multi-core connecting cables PRI/22 MTE/1 MTE/1 AW/15 4 BS ISO :2005 Test methods and requirements for basic performance sheathed cables supersedes BS AU 231:1989 ISBN BS ISO 4156:- Straight cylindrical involute splines. Metric module, side fit BS ISO :2005 Generalities supersedes BS :1981 ISBN members, BS ISO :2005 Dimensions ISBN members, BS ISO :2005 Inspection ISBN members, BS ISO 4251:- Tyres (ply rating marked series) and rims for agricultural tractors and machines BS ISO :2005 Tyre designation and dimensions, and approved rim contours supersedes BS AU b:1998 ISBN BS ISO :2005 Tyre load ratings supersedes BS AU b:1999 ISBN AUE/16 MCE/2 MCE/2 MCE/2 AUE/4 AUE/4 BS IMPLEMENTATIONS Page 17 of 95

18 BS ISO 4650:2005 Rubber. Identification. Infrared spectrometric method supersedes BS :1985 ISBN members, BS ISO 4998:2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality ISBN X BS ISO 4999:2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities ISBN BS ISO 5389:2005 Turbocompressors. Performance test code ISBN members, BS ISO 5495:2005 Sensory analysis. Methodology. Paired comparison test supersedes BS :1982 ISBN BS ISO 5667:- Water quality. Sampling BS ISO :2005 Guidance on sampling of rivers and streams supersedes BS :1991 ISBN X PRI/23 ISE/10 ISE/10 MCE/8 AW/12 EH/3/6 BS ISO 6145:- Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods BS ISO :2005 Electrochemical generation ISBN BS ISO 6199:2005 Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures supersedes BS ISO 6199:1991 ISBN BS ISO 6580:2005 General-purpose industrial fans. Circular flanges. Dimensions supersedes BS 6339:1983 ISBN X BS ISO 6621:- Internal combustion engines. Piston rings BS ISO :2005 Quality requirements supersedes BS :1992 ISBN X BS ISO 6658:2005 Sensory analysis. Methodology. General guidance supersedes BS :1986 ISBN BS ISO 6753:- Tools for pressing and moulding. Machined plates PTI/15 IDT/1/2 MCE/17 MCE/14/-/10 AW/12 BS ISO :2005 Machined plates for press tools ISBN BS ISO/IEC 7501:- Identification cards. Machine readable travel documents BS ISO/IEC :2005 Machine readable passport ISBN BS ISO/IEC :2005 Machine readable official travel documents supersedes BS ISO/IEC :1997 ISBN BS ISO 7663:2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures supersedes BS 6845:1996 ISBN BS ISO/IEC 7816:- Identification cards. Integrated circuit cards BS ISO/IEC :2005 Cards with contacts. USB electrical interface and operating procedures ISBN members, BS ISO 7839:2005 Textile machinery and accessories. Knitting machines. Vocabulary and classification ISBN MTE/12 IST/17 IST/17 PRI/50 IST/17 TCI/33 BS IMPLEMENTATIONS Page 18 of 95

19 BS ISO 8005:2005 Carbonaceous materials used in the production of aluminium. Green and calcined coke. Determination of ash content supersedes BS :1985 ISBN BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption supersedes BS :1987 ISBN BS ISO 8069:2005 Dried milk. Determination of content of lactic acid and lactates supersedes BS :1987 ISBN BS ISO 8216:- Petroleum products. Fuels (class F). Classification BS ISO :2005 Categories of marine fuels supersedes BS :1996 ISBN BS ISO 8217:2005 Petroleum products. Fuels (class F). Specifications of marine fuels supersedes BS MA 100:1996 ISBN BS ISO 8262:- Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method) CII/24 CII/24 PTI/2 PTI/2 BS ISO :2005 Infant foods supersedes BS :1989 ISBN BS ISO :2005 Edible ices and ice-mixes supersedes BS :1989 ISBN BS ISO :2005 Special cases supersedes BS :1989 ISBN BS ISO 8664:2005 Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres supersedes BS AU :1993 ISBN BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density supersedes BS :1992 ISBN BS ISO 10542:- Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems BS ISO :2005 Docking-type tiedown systems ISBN AUE/4 CH/173/1 BS ISO 10966:2005 Sports and recreational equipment. Fabrics for awnings and camping tents. Specification ISBN BS ISO 11157:2005 Road vehicles. Brake lining assemblies. Inertia dynamometer test method supersedes BS ISO 11157:1999 ISBN BS ISO 11269:- Soil quality. Determination of the effects of pollutants on soil flora BS ISO :2005 Effects of chemicals on the emergence and growth of higher plants ISBN BS ISO 11357:- Plastics. Differential scanning calorimetry (DSC) BS ISO :2005 Determination of specific heat capacity ISBN BS ISO 11568:- Banking. Key management (retail) BS ISO :2005 Symmetric ciphers, their key management and life cycle ISBN TCI/74 AUE/11 EH/4 PRI/21 IST/12 BS IMPLEMENTATIONS Page 19 of 95

20 BS ISO/IEC 11693:2005 Identification cards. Optical memory cards. General characteristics supersedes BS ISO/IEC 11693:2000 ISBN BS ISO/IEC 11694:- Identification cards. Optical memory cards. Linear recording method BS ISO/IEC :2005 Physical characteristics ISBN BS ISO 11844:- Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres BS ISO :2005 Determination of corrosion attack in indoor atmospheres ISBN IST/17 IST/17 ISE/NFE/8 BS ISO 11992:- Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles BS ISO :2005 Diagnostics ISBN members, BS ISO 12647:- Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints BS ISO :2005 Coldset offset lithography on newsprint supersedes BS ISO :1998 ISBN BS ISO :2005 Publication gravure printing ISBN X AUE/16 PAI/43 PAI/43 BS ISO :2005 Definitions, symbols and general considerations ISBN X BS ISO :2005 Definition of impact conditions in relation to accident data ISBN members, BS ISO :2005 Motorcyclist anthropometric impact dummy ISBN members, BS ISO :2005 Variables to be measured, instrumentation and measurement procedures ISBN X members, AUE/14 AUE/14 AUE/14 AUE/14 BS ISO 11866:- Milk and milk products. Enumeration of presumptive $7IEscherichia coli$7r BS ISO :2005 Most probable number technique using 4-methylumbelliferyl-$Gb-D-glucur onide (MUG) supersedes BS ISO :1997 ISBN BS ISO :2005 Colony-count technique at 44$0DC using membranes supersedes BS ISO :1997 ISBN BS ISO 13203:2006 Chains, sprockets and accessories. List of equivalent terms ISBN BS ISO 13226:2005 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers supersedes BS ISO 13226:1999 ISBN BS ISO 13232:- Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles MCE/1 PRI/22 BS ISO :2005 Injury indices and risk/benefit analysis ISBN members, BS ISO :2005 Full-scale impact-test procedures ISBN members, BS ISO :2005 Standardized procedures for performing computer simulations of motorcycle impact tests ISBN AUE/14 AUE/14 AUE/14 BS IMPLEMENTATIONS Page 20 of 95