Installer and user reference guide

Transcription

1 Instller nd user referene guide - + BRC1H51W BRC1H51K BRC1H51S English

2 Tle of ontents Tle of ontents 1 Generl sfety preutions For the user For the instller Aout this doument 3 For the user 4 3 Buttons 4 4 Home sreens 4 5 Sttus ions 4 6 Opertion Setpoint To set the setpoint Opertion mode Aout the opertion modes To set the opertion mode Airflow Airflow diretion Fn speed Ventiltion Ventiltion mode Ventiltion rte Advned opertion To mke Bluetooth onnetion Mintenne nd servie Overview: Mintenne... 8 For the instller 9 8 Aout the ox To unpk the ontroller Preprtion Wiring requirements To prepre the wiring for instlltion Instlltion Overview: Instlltion Mounting the ontroller Aout mounting the ontroller To mount the ontroller Conneting the eletril wiring Preutions when onneting eletril wiring To onnet the eletril wiring Closing the ontroller Preutions when losing the ontroller To lose the ontroller Opening the ontroller Preutions when opening the ontroller To open the ontroller Strting up the system Mster nd slve ontroller To designte ontroller s slve Opertion Buttons Sreen Sttus inditor Informtion Informtion sreen Informtion menu Configurtion Instller menu Aout the instller menu Sreen settings Sttus inditor settings Field settings Misellneous settings Remote ontroller softwre updte To updte the softwre with Updter Mintenne Mintenne sfety preutions Aout mintenne To remove wrning sreen To len the ontroller Trouleshooting Error odes of the indoor unit Tehnil dt Connetion digrm Typil lyout Typil lyout for group ontrol Controller + DIII entrl ontrol equipment Generl sfety preutions Plese red these generl sfety preutions refully efore instlling ir onditioning equipment, nd e sure to instll the equipment orretly. Filure to follow these instrutions properly my result in property dmge or personl injury, whih my e serious depending on the irumstnes. Mening of wrnings nd symols These sfety messges re used to ttrt your ttention. The mening of eh sfety messge is desried elow: WARNING Indites sitution tht ould result in deth or serious injury. CAUTION Indites sitution tht ould result in minor or moderte injury. DANGER Indites sitution tht results in deth or serious injury. DANGER: RISK OF EXPLOSION Indites sitution tht ould result in explosion. Indites useful tips or dditionl informtion. NOTICE Indites sitution tht ould result in equipment or property dmge. 1.1 For the user Also see the opertion mnul delivered with the outdoor nd indoor unit. 2

3 2 Aout this doument WARNING Do NOT ply with the unit or its remote ontroller. Aidentl opertion y hild my result in impirment of odily funtions nd hrm helth. WARNING To prevent eletri shoks or fire: Do NOT operte the ontroller with wet hnds. Do NOT disssemle the ontroller nd touh interior prts. Contt your deler. Do NOT modify or repir the ontroller. Contt your deler. Do NOT relote or reinstll the ontroller y yourself. Contt your deler. WARNING Do NOT use flmmle mterils (e.g. hirspry or insetiide) ner the ontroller. NOTICE To len the ontroller, do NOT use orgni solvents, suh s pint thinner. Possile onsequene: dmge, eletri shok, or fire. 1.2 For the instller The preutions desried in this doument over very importnt topis, follow them refully. This ontroller is n option nd nnot e used stndlone. Also see the instlltion nd opertion mnul of the indoor nd outdoor units. NOTICE Improper instlltion or tthment of equipment or essories ould result in eletri shok, short-iruit, leks, fire or other dmge to the equipment. Only use essories, optionl equipment nd spre prts mde or pproved y Dikin. WARNING All field wiring nd omponents MUST e instlled y liensed eletriin nd MUST omply with the pplile legisltion. NOTICE The remote ontroller MUST e mounted indoors. NOTICE When the ontroller is used s room thermostt, selet n instlltion lotion where the verge temperture in the room n e deteted. Do NOT instll the ontroller in the following ples: In ples tht re exposed to diret sunlight. In ples tht re ner het soure. In ples tht re ffeted y outside ir or ir drught due to e.g. door opening/losing. In ples where the disply n esily get dirty. In ples where there is NO esy ess to the ontrols. In ples with tempertures < 10 C nd >50 C. In ples where the reltive humidity is >95%. In ples where there is mhinery tht emits eletromgneti wves. Eletromgneti wves my distur the ontrol system, nd use mlfuntion of the equipment. In ples where it my e exposed to wter, or in generlly moist res. If you re NOT sure how to instll or operte the unit, ontt your deler. After finishing instlltion: Condut tril opertion to hek for fults. Explin the user how to operte the ontroller. Ask the user to store the mnul for future referene. Consult your deler regrding the relotion nd reinstlltion of the ontroller. 2 Aout this doument Trget udiene Authorised instllers + end users Doumenttion set This doument is prt of doumenttion set. The omplete set onsists of: Instlltion nd opertion mnul: Instlltion instrutions Bsi opertion instrutions Formt: Pper (in the ox of the ontroller) : Extended instlltion nd opertion informtion Formt: Digitl files on Dikin Control Assistnt in-pp doumenttion: The ontroller only llows for si settings nd opertion. Advned settings nd opertion re performed vi the Dikin Control Assistnt pp. For more informtion, see the pp nd its in-pp doumenttion. Formt: App ville from Google Ply nd the Apple Store Delrtion of onformity: Herey, Dikin Europe N.V. delres tht the rdio equipment type BRC1H is in ompline with the Diretive 2014/53/EU. The originl delrtion of onformity is ville from the BRC1H produt pge Formt: Digitl file from the produt pge Ltest revisions of the supplied doumenttion my e ville on the regionl Dikin wesite or vi your deler. The originl doumenttion is written in English. All other lnguges re trnsltions. Tehnil engineering dt A suset of the ltest tehnil dt is ville on the regionl Dikin wesite (pulily essile). The full set of ltest tehnil dt is ville on the Dikin extrnet (uthentition required). 3

4 3 Buttons For the user 3 Buttons Ative opertion mode Setpoint temperture The ontroller is equipped with power sving funtion tht uses the sreen to go lnk fter period of intivity. To mke the sreen light up gin, press one of the uttons. 5 Sttus ions d - + d ON/OFF When OFF, press to turn ON the system. As result, the sttus inditor (e) will turn ON too. When ON, press to turn OFF the system. As result, the sttus inditor (e) will turn OFF too. ENTER/ACTIVATE /SET From the home sreen, enter the min menu. From the min menu, enter one of the sumenus. From their respetive sumenu, tivte n opertion/ ventiltion mode. In one of the sumenus, onfirm setting. CYCLE/ADJUST Cyle left. Adjust setting (defult: derese). CYCLE/ADJUST Cyle right. Adjust setting (defult: inrese). e Ion Desription Bluetooth. 1 Indites tht the ontroller is ommuniting with moile devie, for use with the Dikin Control Assistnt pp. Centrlised ontrol. Indites tht the system is ontrolled y entrl ontrol equipment (optionl essory) nd tht ontrol of the system y the ontroller is limited. Chngeover under entrlised ontrol. Indites tht the ooling/heting hngeover is under entrlised ontrol y nother indoor unit, or y n optionl ool/ het seletor tht is onneted to the outdoor unit. Defrost/Hot strt. Indites tht the defrost/hot strt mode is tive. Timer. Indites tht the shedule timer or OFF timer is enled. Clok not set. Indites tht ontroller's lok is not set. Self-lening filter opertion. Indites tht selflening filter opertion is tive. The ehviour of the sttus inditor is ording to field settings. For more informtion, see " Sttus inditor settings" on pge 14. Quik Strt. Indites tht Quik Strt mode is tive (Sky Air only). Test opertion. Indites tht Test Opertion mode is tive (Sky Air only). 4 Home sreens Depending on instller onfigurtion, the ontroller either hs stndrd or detiled home sreen. In most ses, the stndrd home sreen gives you only the tive opertion mode, messges (if ny), nd the setpoint temperture (in se of Cooling, Heting, or Auto opertion mode). The detiled home sreen gives you ll kinds of informtion through sttus ions. Stndrd Detiled 19 Inspetion. Indites tht the indoor or outdoor unit is eing inspeted. Periodi inspetion. Indites tht the indoor or outdoor unit is eing inspeted. Bkup. Indites tht in the system n indoor unit is set s kup indoor unit. Individul irflow diretion. Indites tht the individul irflow diretion setting is enled. Informtion. Indites tht the system hs messge to onvey. To see the messge, go to the informtion sreen. Wrning. Indites tht n error ourred, or tht n indoor unit omponent needs to e mintined. Messges Demnd ontrol. Indites tht the system's energy onsumption is eing limited, nd tht it is running with restrited pity. (1) The Bluetooth word mrk nd logos re registered trdemrks owned y the Bluetooth SIG, In. nd use of suh mrks y Dikin Europe N.V. is under liense. Other trdemrks nd trde nmes re those of their respetive owners. 4

5 6 Opertion Ion Desription Ion Opertion mode End of demnd ontrol. Indites tht the system's energy onsumption is no longer eing limited, nd tht it is no longer running with restrited pity. Rottion. Indites tht Rottion mode is tive. Heting. In this mode, heting will e tivted s required y the setpoint. Fn Only. In this mode, ir irultes without heting or ooling. Setk. Indites tht the indoor unit is operting under setk onditions. Ventiltion. Indites tht het relim ventiltion unit is onneted. For informtion on the opertion mode nd ventiltion mode ions, see "6.2 Opertion mode" on pge 5 nd "6.4.1 Ventiltion mode" on pge 7 respetively. Most ions re relted to things set in the Dikin Control Assistnt pp. For more informtion, see the pp. 6 Opertion From the home sreen, press to enter the min menu. Use nd to yle through the menus. Press gin to enter one of the menus. Depending on the type of indoor unit you re operting, more or less menus my e ville. In the min menu, the ion for eh menu reflets the urrent tive setting or mode. When operting the ontroller, the menu you nvigte through n look different from tht represented in this mnul. The ontroller only llows for si opertion of the system. For dvned opertion (setk, shedule timer, ), see the Dikin Control Assistnt pp. 6.1 Setpoint The setpoint is the trget temperture for the Cooling, Heting, nd Auto opertion modes To set the setpoint Prerequisite: The tive opertion mode is either 'Cooling', 'Heting', or 'Auto'. 1 In the home sreen, use nd to djust the setpoint. Result: The indoor unit hnges its temperture setpoint. 6.2 Opertion mode The indoor unit n operte in vrious opertion modes. Ion Opertion mode Cooling. In this mode, ooling will e tivted s required y the setpoint. Dry. In this mode, the ir humidity will e lowered with miniml temperture derese. The temperture nd fn speed re ontrolled utomtilly nd nnot e ontrolled y the ontroller. Dry opertion will not funtion if the room temperture is too low. Ventiltion.In this mode, the spe gets ventilted, ut not ooled or heted. Air Clen. In this mode, the optionl ir lening unit opertes. Ventiltion + Air Clen. Comintion of ventiltion nd ir len opertion. Auto. In Auto mode, the indoor unit utomtilly swithes etween heting nd ooling mode, s required y the setpoint. Depending on the indoor unit, more or less opertion modes re ville Aout the opertion modes Cooling If the indoor unit is ooling-only model, it n only e set to run in Cooling, Fn only, or Dry opertion mode. If the opertion mode hngeover of n indoor unit is under entrlised ontrol ('hngeover under entrlised ontrol' sttus ion linking in the home sreen), then it is NOT possile to hnge the opertion mode of tht indoor unit. For more informtion, see "Swith Cooling/Heting mster" on pge 24. If the outdoor ir temperture is high, it n tke some time until the indoor room temperture rehes the setpoint temperture. If the indoor room temperture is low, nd the indoor unit is set to run in Cooling, the indoor unit n swith to run in defrost opertion first (i.e. heting opertion), this to prevent frost from forming on the indoor unit het exhnger, whih n derese the system's ooling pity. During defrost opertion, the system uses low fn speed or gentle wind to prevent the dishrge of melt wter, while the ontroller displys the set fn speed. Heting When running in Heting opertion mode, the system requires longer time to reh the setpoint temperture thn when running in Cooling opertion mode. To mke up for this, it is reommended to let the system strt opertion in dvne y mking use of the timer funtion. To prevent old drfts nd redution of the system's heting pity, the system n run in the following speil heting opertion modes: 5

6 6 Opertion Defrost Opertion Desription To prevent the loss of heting pity due to frost umultion in the outdoor unit, the system will utomtilly swith to defrost opertion. During defrost opertion, the indoor unit fn will stop opertion, nd the following ion will pper on the home sreen: 2 Use nd to selet n opertion mode. Hot strt (VRV only) Dry The system will resume norml opertion fter pproximtely 6 to 8 minutes. During hot strt, the indoor unit fn will stop opertion, nd the following ion will pper on the home sreen: When the system is stopped while the indoor unit is running in Heting opertion mode, the fn will ontinue to operte for pproximtely 1 minute, this to get out ny het remining in the indoor unit. The lower the outdoor ir temperture, the lower the heting pity. If the system's heting pity is insuffiient, it is reommended to inlude nother heting ppline into the setup (if you use omustion ppline, ventilte the room regulrly. Also, do not use the heting ppline in ples where it is exposed to the irflow of the indoor unit). The indoor unit is of the hot ir irultion type. As result, fter opertion strt, it tkes the indoor unit some time to wrm up the room. The indoor unit fn will utomtilly operte until the indoor temperture of the system rises to ertin level. When hot ir stys under the eiling nd your feet feel old, it is reommended to inlude irultor into the setup. NOTICE To prevent wter lekge or system filure, do NOT turn off the system immeditely fter indoor unit opertion. Before turning off the system, wit until the drin pump finishes dishrging ny wter remining in the indoor unit (pproximtely 1 minute). To ensure smooth strt, do not turn off the system while it is operting. 3 Press to tivte. Result: The indoor unit hnges its opertion mode nd the ontroller returns to the home sreen. 6.3 Airflow Airflow diretion The irflow diretion is the diretion in whih the indoor unit lows its ir. Aout irflow diretion The following irflow diretions n e set: Diretion Fixed position. The indoor unit lows ir in 1 of 5 fixed positions. Swing. The indoor unit lterntes etween the 5 positions. Auto. The indoor unit djusts its irflow diretion ording to movement sensed y movement sensor. Sreen Depending on the type of indoor unit, nd/or on system lyout nd orgnistion, Auto irflow diretion my not e ville. For some types of indoor unit, you nnot set the irflow diretion. To set the irflow diretion 1 Nvigte to the irflow diretion menu To set the opertion mode 1 Nvigte to the opertion mode menu. 2 Use nd to djust the irflow diretion. 6

7 6 Opertion 2 Use nd to djust the fn speed. 3 Press to onfirm. Result: The indoor unit hnges its irflow diretion nd the ontroller returns to the home sreen Fn speed The fn speed is the strength of the irflow oming out of the indoor unit. Aout fn speed Depending on the indoor unit, you n hoose etween either: 2 fn speeds Fn speed Sreen 3 Press to onfirm. Result: The indoor unit hnges its fn speed nd the ontroller returns to the home sreen. 6.4 Ventiltion Ventiltion settings n ONLY e mde for het relim ventiltion units Ventiltion mode The het relim ventiltion unit n operte in vrious opertion modes. 3 fn speeds 5 fn speeds Ion Ventiltion mode Energy Relim Ventiltion. The outdoor ir is supplied to the room fter pssing through het exhnger. Bypss. The outdoor ir is supplied to the room without pssing through het exhnger. Auto. To ventilte the room in the most effiient wy, the het relim ventiltion unit utomtilly swithes etween "Bypss" nd "Energy Relim Ventiltion" mode (sed on internl lultions). Some indoor units dditionlly support Automti fn speed. In this se, the indoor unit djusts its fn speed utomtilly, ording to the setpoint nd indoor temperture. Automti Fn speed Sreen Depending on the het relim ventiltion unit, more or less ventiltion modes re ville. NOTICE Before strting up the system, the unit MUST e energised for t lest 6 hours to void ompressor rekdown during strtup. To ensure smooth strt, do not turn off the system while it is operting. For mehnil protetion purposes, it is possile tht the indoor unit swithes itself to 'Automti fn speed' mode. If the fn stops operting, this does not neessrily men system filure. The fn n stop operting t ll times. It my tke some time efore hnges mde to fn speed settings re tully rried out. To set the ventiltion mode 1 Nvigte to the ventiltion mode menu. 2 Use nd to selet ventiltion mode. To set the fn speed 1 Nvigte to the fn speed menu. 3 Press to tivte. Result: The het relim ventiltion unit hnges its opertion mode nd the ontroller returns to the home sreen. 7

8 7 Mintenne nd servie Ventiltion rte The ventiltion rte is the fn speed during ventiltion opertion. To set the ventiltion rte 1 Nvigte to the ventiltion rte menu. 2 Use nd to djust the ventiltion rte. 3 Press to onfirm. Result: The het relim ventiltion unit hnges its ventiltion rte nd the ontroller returns to the home sreen. 6.5 Advned opertion The ontroller only llows for si opertion. For dvned opertion, use the Dikin Control Assistnt pp To mke Bluetooth onnetion Prerequisite: You hve moile devie on whih the Dikin Control Assistnt pp is instlled nd running. Prerequisite: Your moile devie supports Bluetooth version Open the Dikin Control Assistnt pp nd follow the instrutions from there. 7 Mintenne nd servie 7.1 Overview: Mintenne When the system is in error, or the indoor unit needs to e mintined, onsult your deler. To indite this, you will e onfronted y n error or mintenne sreen upon trying to enter the min menu. Error sreen (exmple) Mintenne sreen (exmple) 8

9 8 Aout the ox For the instller 8 Aout the ox 8.1 To unpk the ontroller 1 Open the ox. 2 Seprte the essories Mounting the ontroller Aout mounting the ontroller Before you n mount the ontroller, you hve to determine the wiring routing, nd ordingly, remove piee of the ontroller's rer sing. The wiring n e routed from the top, the rer, the left, or the ottom. Remove piee of the rer sing ording to the illustrtion: Instlltion nd opertion mnul Wood srews + wll plugs (Ø4.0 30) 9 Preprtion 9.1 Wiring requirements All wiring must omply with the following requirements: Wire speifition Vlue Type Shethed vinyl ord or le (2 wires) Setion 0.75~1.25 mm 2 Mximum length 500 m To prepre the wiring for instlltion 1 Peel the sheth of the prt of the le tht needs to pss through the inside of the rer sing (L), ording to the figure nd the tle. 2 Keep 10 mm distne etween the length of the 2 wires. 10 mm L Wiring from the top Wiring from the left Wiring from the ottom In se you re routing the wiring from the rer, you don't hve to remove nything. When routing the wiring from the top or from the rer, insert the wiring through the knokout hole efore mounting the rer sing to the wll To mount the ontroller 1 Tke the srews nd plugs from the essory g. 2 Mount the rer sing to flt surfe. Wiring outlet Top Left Bottom Rer L ±150 mm ±120 mm ±100 mm No requirements 10 Instlltion 10.1 Overview: Instlltion The instlltion of the ontroller typilly onsists of the following stges: 1 Determining how you wnt to route the eletril wiring, nd nipping wy piee of the rer sing ordingly. 2 Mounting the rer sing to the wll. 3 Conneting the eletril wiring. 4 Closing the ontroller. NOTICE Be reful not to distort the rer sing y overtightening the mounting srews. 9

10 1 10 Instlltion 10.3 Conneting the eletril wiring From the left Preutions when onneting eletril wiring Also red the preutions nd requirements in the following hpters: Generl sfety preutions Preprtion P1P2 WARNING All field wiring nd omponents MUST e instlled y liensed eletriin nd MUST omply with the pplile legisltion. From the ottom CAUTION When onneting the ontroller to the indoor unit, mke sure the indoor unit swithox nd trnsmission wiring re not onneted. NOTICE The wiring for onnetion is NOT inluded. NOTICE When wiring, run the wiring wy from the power supply wiring in order to void reeiving eletri noise (externl noise). P1 nd P2 hve no polrity To onnet the eletril wiring Connet ontroller terminls P1/P2 to indoor unit terminls P1/P2. From the top P1P2 P1P Closing the ontroller Preutions when losing the ontroller CAUTION Never touh the internl prts of the ontroller. CAUTION When losing the ontroller, e reful not to pinh the wiring. NOTICE To prevent dmge, mke sure the front of the ontroller is liked into the rer sing seurely To lose the ontroller 1 Clik the front of the ontroller into the rer sing. From the rer P1P2 2 2 When the instlltion site is dust free, peel off the protetive sel. 10

11 11 Strting up the system 10.5 Opening the ontroller Preutions when opening the ontroller 11.1 Mster nd slve ontroller NOTICE The ontroller PCB is mounted into the front sing. When opening the ontroller, e reful not to dmge the PCB. NOTICE When the front nd rer sing re seprted, mke sure the PCB does not ome into ontt with dust or moisture To open the ontroller 1 Insert flt hed srewdriver into one of the ottom losing mehnisms nd slowly twist it. d Outdoor unit Indoor unit Mster remote ontroller Slve remote ontroller 11.2 To designte ontroller s slve Prerequisite: A mster ontroller is lredy onneted to the indoor unit. 1 Connet seond ontroller. Result: It will strt up utomtilly. 2 Wit for U5 or U8 error to pper on the sreen. d 11 Strting up the system CAUTION Before strting up the system, mke sure: The indoor nd outdoor unit wiring is ompleted. The swith ox overs of the indoor nd outdoor units re losed. It is only possile to use mster nd slve ontroller of the sme type. In se digitl input dpter BRP7A5* is prt of the system, it is not possile to onnet nd designte seond ontroller. Conneting seond ontroller when the system lredy ontins the dpter, will use the dpter to go in error. The ontroller gets its power from the indoor unit. It will strt up s soon s it is onneted. For the ontroller to e operle, therefore mke sure the indoor unit is powered on. One the ontroller is powered, it will utomtilly strt up. If it is the first nd only ontroller tht is onneted to the indoor unit, it will utomtilly get designted s mster ontroller. For seond ontroller to get designted s slve ontroller, mnul tion is required. For instrutions, see "11.2 To designte ontroller s slve" on pge When the U5 or U8 error ppers, press nd keep it pressed until "2" ppers on the sreen. Result: The ontroller is now designted s slve. If the slve ontroller does not disply the home sreen two minutes fter its designtion, turn off the power nd hek the wiring. 12 Opertion 12.1 Buttons - + e d 11

12 12 Opertion d ON/OFF When OFF, press to turn ON the system. As result, the sttus inditor (e) will turn ON too. When ON, press to turn OFF the system. As result, the sttus inditor (e) will turn OFF too. ENTER/ACTIVATE /SET From the home sreen, enter the min menu. From the min menu, enter one of the sumenus. From their respetive sumenu, tivte n opertion/ ventiltion mode. In one of the sumenus, onfirm setting. CYCLE/ADJUST Cyle left. Adjust setting (defult: derese). CYCLE/ADJUST Cyle right. Adjust setting (defult: inrese). The ehviour of the sttus inditor is ording to field settings. For more informtion, see " Sttus inditor settings" on pge 14. Stte OFF ON fintly Desription After period of opertion intivity, the klight will either turn OFF, or go into fint ON stte, depending on opertion onditions: Opertion OFF: klight OFF, Opertion ON: klight ON fintly. Bklight stte hngeover fter intivity is set with remote ontroller field setting R1-8 (No-opertion timer). Bklight fintness is set with remote ontroller field setting R1-10 (Bklight fintness). For more informtion, see "Remote ontroller field settings" on pge Sttus inditor 12.2 Sreen Home sreen Depending on instller onfigurtion, the ontroller either hs stndrd or detiled home sreen. In most ses, the stndrd home sreen gives you only the tive opertion mode, messges (if ny), nd the setpoint temperture (in se of Cooling, Heting, or Auto opertion mode). The detiled home sreen gives you ll kinds of informtion through sttus ions. Stndrd Detiled Sttus inditor For instrutions on how to mke sttus inditor settings, see " Sttus inditor settings" on pge Informtion Messges Ative opertion mode Setpoint temperture Home sreen mode is set with remote ontroller field setting R1-7 (Home sreen). For more informtion, see "Remote ontroller field settings" on pge 18. Bklight The sreen klight hs the following sttes: Informtion sreen The informtion sreen ollets the following informtion: Informtion Softwre version Desription The informtion sreen will lwys ontin the ltest softwre version. Stte ON Desription For the ontroller to e operle, the sreen klight needs to e ON (otherwise the ontroller does not detet ny utton presses). To turn ON the klight, press shortly. For instrutions on how to set sreen rightness nd ontrst when the klight is ON, see " Sreen settings" on pge 13. Softwre version 12

13 13 Configurtion Sttus ions Informtion Desription Depending on opertion sttus, the informtion sreen n ontin vrious sttus ions. For the mening of those ions, see "5 Sttus ions" on pge 4. When the informtion sreen hs informtion to onvey, is displyed in the top left orner of the home sreen. Ctegory Ion Settings Field settings Misellneous settings Indoor unit field settings Remote ontroller field settings Group ddress nd Airnet ddress Externl input interlok The presene of ions on the informtion sreen depends on opertion sttus. The ontroller my disply more or less ions thn re indited here. To enter the informtion sreen Prerequisite: The ontroller displys the home sreen. 1 Press nd keep it pressed until the informtion sreen ppers. To enter the instller menu Fore fn ON Swith Cooling/Heting mster Informtion Prerequisite: The ontroller displys the home sreen. 1 Press nd keep it pressed until the informtion sreen ppers: The presene of ions on the informtion sreen depends on opertion sttus. The ontroller my disply more or less ions thn re indited here Informtion menu You n onsult dditionl informtion in the informtion menu, whih is prt of the instller menu. For instrutions on how to enter the informtion menu, see "13.1 Instller menu" on pge 13 nd "Informtion" on pge 25. The presene of ions on the informtion sreen depends on opertion sttus. The ontroller my disply more or less ions thn re indited here. 2 From the informtion sreen, press nd simultneously nd keep them pressed until you enter the instller menu: 13 Configurtion 13.1 Instller menu Aout the instller menu In the instller menu you n mke the following settings: Ctegory Ion Settings Sreen settings Brightness Result: You re now in the instller menu Sreen settings To set sreen rightness Prerequisite: You re in the instller menu. 1 Nvigte to the sreen rightness menu. Contrst Sttus inditor settings Intensity 2 Use nd to djust sreen rightness. 13

14 13 Configurtion 1 Nvigte to the sttus inditor intensity menu. 3 Press to onfirm. Result: The sreen djusts its rightness nd the ontroller returns to the instller menu. 2 Use nd to djust sttus inditor rightness. To set sreen ontrst Prerequisite: You re in the instller menu. 1 Nvigte to the sreen ontrst menu. 3 Press to onfirm. Result: The sttus inditor djusts its intensity nd the ontroller returns to the instller menu. 2 Use nd to djust sreen ontrst Field settings Aout field settings The ontroller llows for mking field settings relted to the indoor unit, nd to the ontroller itself. 3 Press to onfirm. Result: The sreen djusts its ontrst nd the ontroller returns to the instller menu Sttus inditor settings Aout sttus inditor settings In the instller menu, you n set sttus inditor intensity nd ehviour. Sreen Indoor unit Field settings Remote ontroller Intensity For instrutions on how to set sttus inditor intensity, see "To set sttus inditor intensity" on pge 14. Behviour Sttus inditor ehviour is hnged through remote ontroller field settings. For instrutions on how to mke field settings, see " Field settings" on pge 14. For n overview of remote ontroller field settings, see "Remote ontroller field settings" on pge 18. To set sttus inditor intensity Prerequisite: You re in the instller menu. In oth se, the setting proedure is the sme. For instrutions, see "Setting proedure" on pge 14. Setting proedure Field settings re omposed of the following omponents: 1 Modes ("Mode"), 2 Units ("Unit"), 3 Settings ("SW"), nd 4 Vlues for those settings. The field settings menus hve two levels. You set modes nd units in the first level, nd settings nd vlues in the seond. 14

15 13 Configurtion Level First level Desription Mode (Mode) A mode is group of settle prmeters. In the field settings tles, find ville mode numers in the "Mode" olumn. Unit (Unit) (indoor unit field settings only) Seond level A unit is n individul unit to whih setting might pply. When mking field settings for individul units, this is the ple where you define the numer of the unit to whih the setting pplies. When mking field settings for grouped units, you do NOT set the unit numer. The settings will then pply to ll indoor units tht re prt of tht group. In the field settings tles, find the mode numers tht pply to individul indoor units etween rkets in the "Mode" olumn. Setting (SW) A setting is settle prmeter. These re the settings you re mking. In the field settings tles, find the ville setting numers in the "SW" olumn. Vlue A vlue is one of fixed set of vlues tht you n hoose for setting. When the vlue field ontins "-", there re no vlues ville for the seleted setting: SW 00 When mking group settings, you n ONLY set vlue for setting if the vlue field ontins "*" (if the vlue field does NOT ontin "*", you nnot pply the seleted setting to the group): SW 00 In the field settings tles, find the ville vlues for eh setting in the "Vlue" olumn. Nvigtion To nvigte through the field settings menus, use,, nd. 1 Use nd to move the highlighter. 15

16 13 Configurtion 2 Press to selet field setting omponent. 3 Use nd to hnge the vlue of tht field setting omponent. 4 Press to onfirm tht vlue. 5 In the first level, selet to move to the seond level. 6 In the seond level, nvigte nd selet in the sme wy s you did in the first level. 7 Selet to onfirm nd tivte mde settings. SW 00 8 At ll times, selet to go k level. 16

17 13 Configurtion Indoor unit field settings The setting proedure is different depending on whether you wnt to mke settings for individul units, or for grouped units. Individul indoor units Define mode y setting Mode numer (numer etween rkets) Define the unit to whih the setting will pply y setting Unit numer Define the setting y setting SW numer Define vlue for tht setting Grouped indoor units Define mode y setting Mode numer (numer NOT etween rkets) Do NOT set Unit numer (setting pplies to ll the units in the group) Define the setting y setting SW numer Define vlue for tht setting Mode SW Setting (SW) desription 10 (20) 00 Filter ontmintion timer: set the timer for the pperne of the "Time to len filter" sreen Ultr long life filter Light ±10000 hrs. Hevy ±5000 hrs Long life filter ±2500 hrs ±1250 hrs Stndrd filter ±200 hrs ±100 hrs 01 Long life filter: if pplile, set whih type of long life filter is used. Long life filter Ultr long life filter 02 Controller thermostt sensor: set how the ontroller thermostt sensor is used. Used in omintion with indoor unit thermistor Not used Used exlusively 03 Disle filter sign: set whether or not the filter sign n e displyed. Disply Do not disply 11 (21) 00 Simultneous opertion: set the simultneous indoor unit opertion mode (Sky Air) 12 (22) 01 Externl On/OFF input: set the opertion of voltge free ontts T1/T2 (indoor unit ontts) 02 Thermostt differentil: if the system ontins remote sensor, set the inrese/derese inrements. Pir Twin Triple Doule twin Fored OFF On/OFF opertion Emergeny Fored OFF (multi-tennt) 1 C 0.5 C 13 (23) 00 High ir outlet veloity: set in se of high-eiling pplitions. h 2.7 m 2.7 m<h 3 m 3 m<h 3.5 m 01 Airflow diretion: set in se n indoor unit is equipped with n option kit tht loks the irflow. 03 Airflow funtion: set whether the indoor unit is equipped with deortion pnel t its ir outlet. 4-wy flow 3-wy flow 2-wy flow Equipped Not equipped 04 Airflow diretion rnge Upper Norml Lower 06 Externl stti pressure: set the externl stti pressure (ording to the resistne of the onneted duts). Norml High stti pressure Low stti pressure FHYK: follow the high-eiling setting. Norml High eiling 15 (25) 03 Humidifition drin pump: set whether the system is equipped with humidifition drin pump. Equipped Not equipped 1 01 Thermostt sensor: set whih thermostt sensor you wnt to use. Indoor unit thermistor Controller thermistor 1 12 Window ontt B1 (externl input) Do not use Use 1 13 Key rd ontt B2 (externl input) Do not use Use 1e 02 Setk funtion: set Setk opertion. No Setk Heting only Cooling only Heting nd Cooling 1e 07 Rottion overlp time. Set the Rottion overlp time. 30 minutes 15 minutes 10 minutes 5 minutes The onnetion of optionl essories to the indoor unit might use hnges to some field settings. For more informtion, see the instlltion mnul of the optionl essory. For detils out the speifi field settings of eh type of indoor unit, see the instlltion mnul of the indoor units. Field settings tht re not ville for onneted indoor unit re not displyed. Field setting defult vlues re different depending on the indoor unit model. For more informtion, see the servie mnul of the indoor units. 17

18 13 Configurtion Remote ontroller field settings Mode SW SW desription Vlue Defult vlue R1 3 Controller thermistor djustment (Cooling) Sttus inditor mode (R1-11) 4 Controller thermistor djustment (Heting) 0: 3.0 C, 1: 2.5 C, 2: 2.0 C, 3: 1.5 C, 4: 1.0 C, 5: 0.5 C, 6: ±0 C, 7: +0.5 C, 8: +1.0 C, 9: +1.5 C, 10: +2.0 C, 11: +2.5 C, 12: +3.0 C 0: 3.0 C, 1: 2.5 C, 2: 2.0 C, 3: 1.5 C, 4: 1.0 C, 5: 0.5 C, 6: ±0 C, 7: +0.5 C, 8: +1.0 C, 9: +1.5 C, 10: +2.0 C, 11: +2.5 C, 12: +3.0 C 5 Controller thermistor djustment (Auto) 0: 3.0 C, 1: 2.5 C, 2: 2.0 C, 3: 1.5 C, 4: 1.0 C, 5: 0.5 C, 6: ±0 C, 7: +0.5 C, 8: +1.0 C, 9: +1.5 C, 10: +2.0 C, 11: +2.5 C, 12: +3.0 C 6 Controller thermistor djustment (Fn only) 7 Home sreen 0: Detiled 1: Stndrd 8 Bklight no-opertion timer 0: 5 seonds 1: 10 seonds 2: 20 seonds 0: 3.0 C, 1: 2.5 C, 2: 2.0 C, 3: 1.5 C, 4: 1.0 C, 5: 0.5 C, 6: ±0 C, 7: +0.5 C, 8: +1.0 C, 9: +1.5 C, 10: +2.0 C, 11: +2.5 C, 12: +3.0 C 9 Sttus inditor fintness 0: 0% (OFF), 1: 1%, 2: 2%, 3: 3%, 4: 5%, 5: 7%, 6: 9%, 7: 11%, 8: 13%, 9: 15%, 10: 17%, 11: 20% 10 Bklight fintness 0: 0% (OFF), 1: 1%, 2: 2%, 3: 3%, 4: 4%, 5: 5%, 11 Sttus inditor mode 0: Norml 1: Hotel setting 1 2: Hotel setting 2 Remote ontroller field setting R1-11 llows for the sttus inditor to e set to mode suitle for use in hotels. Aording to the vlue tht is set for this setting, the sttus inditor hs the following ehviour: Opertion stte Sttus inditor ehviour 0 (Norml) 1 (Hotel setting 1) 2 (Hotel setting 2) Opertion ON ON ON ON (when the klight goes into fint stte, the sttus inditor turns OFF) Opertion OFF OFF OFF OFF Error Blinking (no hnge) (no hnge) Wrning ON ON ON (when the klight goes into fint stte, the sttus inditor turns OFF) Setting of sttus inditor intensity ON ON ON Piring with indoor unit Blinking Blinking Blinking EEPROM initilistion ON ON ON

19 13 Configurtion Misellneous settings Group ddress nd Airnet ddress (DIII) Group ddress To ontrol the system with entrl ontrol equipment, you need to set ddresses for: Groups ("Group"), nd/or Units ("Group(Unit)"). The Group ddress nd Airnet ddress menu hs two levels. You define groups nd/or units in the first level, nd set or relese ddresses for those groups nd/or units in the seond. First level Address Group (Group) Desription A group is group of indoor units. When setting ddresses for groups, you do NOT hve to define unit numer. Unit (Group(Unit)) A unit is n individul indoor unit. Define the indoor unit for whih you wnt to set n ddress. Seond level Define n ddress for the indoor/outdoor unit. To SET n ddress, mke sure is seleted. Apply settings. To RELEASE n ddress tht ws previously set, hnge to nd then pply settings. 19

20 13 Configurtion AirNet ddress To onnet the system to the AirNet monitoring nd dignostis system, you need to set AirNet ddresses for: Indoor units ("I/U") Outdoor units ("O/U") The Group ddress nd AirNet ddress menu hs two levels. You define groups nd/or units in the first level, nd set nd relese n ddress for those groups nd/or units in the seond. First level Address Indoor unit (I/U) Desription Define the indoor unit for whih you wnt to set n AirNet ddress. Proeed to the next level. Outdoor unit (O/U) Define the outdoor unit for whih you wnt to set n AirNet ddress. Proeed to the next level. 20

21 13 Configurtion Seond level Address Desription Define n ddress for the indoor/outdoor unit. To SET n ddress, mke sure is seleted. Apply settings. To RELEASE n ddress tht ws previously set, hnge to nd then pply settings. Externl input interlok 1 Nvigte to the externl input interlok menu. Aout externl input interlok Externl input interlok llows for the integrtion of key rd nd window ontt logi into the system. Externl input interlok is only ville in se digitl input dpter BRP7A5* is prt of the system. When the dpter is prt of the system: it is not possile to onnet seond (slve) ontroller, nd the shedule funtion will e disled for s long the dpter is onneted to the indoor unit. Mke sure tht the digitl input dpter nd its optionl ontts (window ontt B1 nd key rd ontt B2) re orretly instlled. Confirm tht the voltge free ontt of the digitl input dpter is in the orret position. For instrutions on how to instll the digitl input dpter, see the instlltion mnul of the digitl input dpter. In se the digitl input dpter does not funtion properly, the externl input interlok menu is not ville in the instller menu. In se entrlised ontroller is dditionlly prt of the system, externl input interlok is ontrolled y the entrlised ontroller. The digitl input dpter is then overruled. To mke externl input interlok settings Prerequisite: You re in the instller menu. 2 Use nd to nvigte through the menu. 3 Press to selet prmeter. 4 With prmeter seleted, use nd to hnge tht prmeter's vlue. 5 With prmeter seleted, press to onfirm the vlue for tht prmeter. 6 When you re done mking settings, onfirm ll settings y seleting nd pressing. Result: The system will restrt nd implement ny hnges mde. For n overview of settle prmeters nd wht they men, see "Externl input interlok settings overview" on pge 21. Externl input interlok settings overview B2 Dely Timer Prmeter Desription Possile vlues Defult vlue Timer tht strts from s soon the key rd is removed. The unit ontinues norml opertion until the timer expires minutes "1 min" 21

22 13 Configurtion B2 Reset Timer Prmeter Desription Possile vlues Defult vlue Timer tht strts from s soon the Dely Timer expires. When this timer expires, the previous stte (i.e. regulr setpoint) hnges to the "Defult Reset Setting" stte hours "20 hours" Reset ON/OFF "Defult Reset Setting" on/off stte "ON", "OFF", "--" "OFF" Reset Mode "Defult Reset Setting" opertion mode Auto, Cooling, Heting, Fn only, -- "--" Reset Cool SP "Defult Reset Setting" ooling setpoint See indoor unit's setpoint rnge nd setpoint rnge limittion, "--" "22 C" Reset Het SP "Defult Reset Setting" heting setpoint See indoor unit's setpoint rnge nd setpoint rnge limittion, "--" "22 C" When the vlue for prmeter is "- -", this mens tht when the timers expires, nothing hnges for tht prmeter nd the urrent tive vlue is kept. Window ontt logi Window ontt B1 Key rd ontt B2 Time Ation Contt losed (window open) Contt losed (key rd IN) Norml indoor unit opertion. The unit returns to the previous stte efore opening the ontt. Contt open (window open) Contt losed (key rd IN) Unit opertion is fored off: No dely nd reset timer funtionlity. Not possile to turn on/off the unit with the ontroller's ON/OFF utton. 22

23 13 Configurtion Key rd ontt logi Window ontt B1 Key rd ontt B2 Time Ation Contt losed (window losed) Contt losed (key rd IN) Dely timer<time<reset timer Time>Reset timer The unit opertes normlly. If the reset timer hs not expired, the unit returns to the previous stte efore opening the ontt. If the reset timer hs expired, the unit returns to the "Defult Reset Setting" (see "Externl input interlok settings overview" on pge 21). Contt losed (window losed) Contt open (key rd OUT) Time<Dely timer Norml indoor unit opertion. Contt losed (window losed) Contt open (key rd OUT) Time>Dely timer Unit opertion is fored off: Not possile to turn on/off the unit with the ontroller's ON/OFF utton. After the dely timer hs expired, the reset timer will strt ounting. The "previous stte" n e the on/off stte, opertion mode, ooling setpoint, nd heting setpoint. When using the ontts, the fn speed s well s the setk ooling nd heting setpoint n e hnged t ny time, without losing hnges. The fn speed is stored independently for the two min opertion modes (Heting nd Cooling). Seprte fn speed settings re sved for Heting opertion mode on the one hnd, nd Cooling, Dry nd Fn only opertion mode on the other hnd. When losing the ontt, hnges mde while the key rd ontt is open nd the dely timer hs not expired (norml opertion) will not e NOT sved. Comintion of window ontt nd key rd ontt logi The window ontt hs priority over the dely timer of the key rd ontt: When the window ontt is opened while the key rd ontt is open, the dely timer will immeditely expire if it is still running. The reset timer will immeditely strt ounting or will not reset when it ws lredy running. The reset timer funtionlity of the key rd ontt hs priority over the window ontt when returning to the previous stte: When the key rd ontt is opened while the window ontt is open, the dely timer will strt running. When the dely timer expires the reset timer will strt running. When the reset timer expires, the previous stte is updted to the "Defult Reset Setting" stte. Exmple 1 1 You remove the key rd. Result: The indoor unit ontinues operting normlly until the dely timer expires. 2 You open the window efore the dely timer expires. Result: The indoor unit stops immeditely. It is not possile to turn the unit on or off, the dely timer stops ounting, nd the reset timer strts ounting. 3 You insert the key rd gin. Result: An updte of the previous stte ours. The unit is fored off (see "Window ontt logi" on pge 22). IF the reset timer HAS NOT expired efore inserting the key rd, the previous stte is the sme s the originl stte euse there ws only hnge to the originl stte. IF the reset timer HAS expired efore inserting the key rd, the previous stte is the "Defult Reset Setting" stte. 4 You lose the window. Result: The unit reverts to the previous stte. The previous stte depends on the expirtion of the reset timer. Exmple 2 1 You open the window. Result: The unit stops immeditely. It is not possile to turn the unit on or off with the ON/OFF utton, nd the dely timer does not strt ounting. 2 You remove the key rd. Result: The dely timer strts ounting. 3 You lose the window gin. Result: There is no hnge in stte. It is s if you never opened the window. IF the dely timer HAS expired efore losing the window, the reset timer will hve strted ounting. Closing the window hs no influene on the reset timer. IF the dely timer HAS NOT expired efore losing the window, it will expire immeditely nd the reset timer will strt ounting. When the reset timer expires, the previous stte is updted to the "Defult Reset Setting" stte. 4 You insert the key rd gin. Result: IF the reset timer HAS NOT expired efore inserting the key rd, the unit returns to the stte efore the window ws opened (lst "on" stte); IF the reset timer HAS expired efore inserting the key rd, the unit goes to the "Defult Reset Setting" stte. Fore fn ON Aout Fore fn ON Fore fn ON llows you to fore fn opertion of individul indoor units. In this wy, you n hek whih indoor unit numer ws ssigned to whih indoor unit. 23

24 13 Configurtion When multiple indoor units re onneted to the sme outdoor unit, there re restritions s to the opertion modes in whih they n run. One outdoor unit does not llow for one indoor unit to perform Cooling opertion, while nother performs Heting opertion. To fore fn opertion Prerequisite: You re in the instller menu. 1 Nvigte to the Fore Fn ON menu. Therefore, the system requires tht one indoor unit is set s ooling/ heting mster. This indoor unit then deides the opertion modes in whih the other (slve) indoor units n run. When one indoor unit is set s ooling/heting mster, the other indoor units utomtilly eome its slves. For instrutions, see "To set Cooling/Heting msterhood" on pge Selet n indoor unit numer. Cooling/Heting msterhood orresponds to the following sttus ion: The ehviour of this sttus ion is ording to the following tle: If ontroller displys 3 Selet nd press to fore fn opertion. Result: The fn of the indoor unit tht orresponds to the seleted indoor unit numer strts operting. The indoor unit onneted to tht ontroller is Cooling/Heting mster. CONSTANT sttus ion The indoor unit onneted to tht ontroller is slve to Cooling/ Heting mster. BLINKING sttus ion NO indoor unit is ssigned s Cooling/Heting mster yet. The opertion mode ehviour of the indoor units is ording to the following tle: Swith Cooling/Heting mster Aout Cooling/Heting msterhood If the mster A Then NO sttus ion Then the slves is set to "Heting", "Dry", or "Auto" opertion mode. strt running in the sme opertion mode s the mster. No other modes re then ville for them. is set to "Cooling" opertion mode.... then the slves nnot run in "Heting" opertion mode, ut n still run in "Cooling", "Fn only" nd "Dry" opertion mode. is set to "Fn only" mode n ONLY run in "Fn only" mode. One n indoor unit is set s mster, it n e relesed from msterhood. For instrutions, see "To relese Cooling/Heting msterhood" on pge 24. To set Cooling/Heting msterhood Prerequisite: No indoor unit is yet set s Cooling/Heting mster ("hngeover under entrlised ontrol" ion linking on ll ontrollers). B Prerequisite: You re operting the ontroller of the indoor unit tht you wnt to set s Cooling/Heting mster. 1 Nvigte to the opertion mode menu. 2 Set the opertion mode to either Cooling or Heting. d A B d Het pump system Het reovery system Outdoor unit Indoor unit Remote ontroller BS unit Result: The indoor unit is now Cooling/Heting mster ("hngeover under entrlised ontrol" ion not on ontroller). Result: All slve ontrollers disply the "hngeover under entrlised ontrol" ion. To relese Cooling/Heting msterhood Prerequisite: You re in the instller menu. 24

25 13 Configurtion Prerequisite: You re operting the ontroller of the indoor unit tht you wnt to relese from its msterhood. 1 Nvigte to the Cooling/Heting msterhood menu. 2 Press to relese the indoor unit from its msterhood. Result: The indoor unit is relesed from its msterhood. Result: The ontrollers of ll indoor units disply linking "hngeover under entrlised ontrol" ion. Informtion Aout the informtion menu In the informtion menu, you n find the following informtion: SW1 Ver Informtion Desription Controller softwre ID Controller softwre version Time SW2 UE878 softwre ID --:--:--:--:--:--: UE878 MAC ddress To red out informtion Prerequisite: You re in the instller menu. 1 Nvigte to the informtion menu. 2 Red out informtion. 3 Press to go to the seond pge. 25

26 14 Mintenne 13.2 Remote ontroller softwre updte To updte the softwre with Updter Prerequisite: PC with Updter (ontt your deler for the orret version of the softwre) Prerequisite: PC USB le EKPCCAB4 or higher (inludes USB le nd dditionl onnetion les) 1 Mke sure tht the indoor unit is powered OFF. 2 Connet the ontroller to the PC Aout mintenne When the indoor unit needs to e mintined, the ontroller will disply on the home sreen, nd onfront you with wrning sreen from s soon s you try to enter the min menu. Perform the required mintenne, nd then remove the wrning sreen. The following wrning sreens re relted to indoor unit mintenne: Time to len filter Time to reple filter d Time to empty dust olletor X2A X2A d PC with Updter USB le Controller PCB To indoor unit 3 Power ON the indoor unit. 4 Open Updter. 5 In Updter, go to "Updte proedure". 6 Type in the model nme of the ontroller. 7 Selet the desired updte proedure. 8 Follow the on-sreen instrutions. 14 Mintenne 14.1 Mintenne sfety preutions WARNING Before rrying out ny mintenne or repir tivities, stop system opertion with the ontroller, nd turn off the power supply iruit reker. Possile onsequene: eletri shok or injury. NOTICE To len the ontroller, do NOT use orgni solvents, suh s pint thinner. Possile onsequene: dmge, eletri shok, or fire. WARNING Do not wsh the remote ontroller. Possile onsequene: eletri lekge, eletri shok, or fire. When the dirt on the surfe nnot e removed esily while lening the ontroller, sok the loth in neutrl detergent diluted with wter, squeeze the loth tightly, nd len the surfe. Afterwrds, wipe dry with dry loth To remove wrning sreen Prerequisite: The ontroller displys the home sreen, nd visile, inditing error or mintenne. 1 Press to enter the min menu. Result: Sine sreen, e.g. 2 Solve the use of the wrning sreen. 3 Press to remove the wrning sreen. is visile, you re onfronted with wrning Result: The ontroller returns to the home sreen. If the use of the wrning ws properly solved, hs disppered To len the ontroller 1 Wipe the sreen nd other surfe prts of the ontroller with dry loth. 15 Trouleshooting 15.1 Error odes of the indoor unit When the indoor unit is in error, the ontroller will disply on the home sreen, nd onfront you with n error sreen from s soon you try to enter the min menu: Solve the use of the error, nd press to remove the error sreen. For n overview of indoor unit error odes nd wht they men, see the doumenttion of the indoor units. is 26